Soleus Air KY-80G инструкция обслуживания

8,000 Portable Air Conditioner KY -80 and KY -80G Operating Instructions © 2010 Soleus Air International[...]

Thank you for choosing a Mobile Comfort Portable Air Conditione r. This owner’s manual will pro- vide you with valuable informatio n necessary for the proper care a nd maintenance of your new prod- uct. Please take a few moments to thoroughly read the instructions and fam iliarize yourself with all the operational aspects of your new Portable Air[...]

3 SPEC IFICA T IONS • The cooling capacity is measured at an ambient tem perature of DB 95 °F, WB 83 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in coolin g mode. • Power consumption is measured when the fan runs at the highest speed setting. • These specifications are for refer[...]

LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detec tion and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the lo ad side and a LCDI attachm ent plug on the line side. The LCDI power cord and[...]

PRODUCT DIAGRAM Control Panel 5 Louvers Louver Guides Casters Power Cord Filters Upper Air Intake Lower Air Intake Remote Control Holder Air Exhaust Vent[...]

P ARTS & WINDOW KIT ASSEMBL Y PARTS EXHAUST HOSE & ADAPTERS ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner or dehumidi fier, the window kit and exhaust hose must be installed. When the unit is operating in fan mode, the window ki t and exhaust hose do not need to be installed . MOUNTING THE EXHAUST[...]

7 SINGLE HOSE WINDOW KIT INSTALLATION When installing the exhaust hose, try and keep it as flat as possible. The less angles and bends in the hose, the better the unit will perform. If be nding or an angle is necessary , use single 90 ° angles like the pictures above. Multiple bends will decrease performance and efficiency This installation is OK [...]

CONTROL P ANEL, DISPLA Y , & OPERA TING INSTRUCTIONS CONTROL PANEL & LED DISPLAY CONTROL PANEL OPERATING INSTRUCTIONS 1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off. 2) Mode Selection - Press the MODE Button repeatedly to cycle betwee n the different m od[...]

1) Power On and Off - Press the ON/OFF (POWER) button once to manually turn th e unit on. Press the Power button once more to turn the unit off. When you manually power the unit on and off by pressing th e ON/OFF button, the preset tim er will be cancelled. 2) Mode Selection - Press the MO DE Button re peatedly to c ycle between t he differe nt mod[...]

Sleep Mode - Press the SLEEP mode button to engage S LEEP mode. Sleep m ode automatically reduces the set temperature by 2 ° F after one hour and 4 ° F after two hours. This feat ure limits compressor usage and enhances energy savings while you are sleeping. Auto Mode - When AUTO mode is selected th e air cond ition er will automatically ch oose [...]

11 When the temperature or humidity is too high, the air conditioner may not be able to evaporate all of the water as quickly as needed. All moisture th at is un able to be evaporated is placed in a sm all bank up water tank in- side the unit. When this tank is com pletely full, an alarm will s ound, the compressor will shut off, and the bucket ful[...]

MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an el ectrical outlet prior to performing any maintenance on the unit. Clean or replace filter - If the air filter is blocked with a dust, the airflow volum e may reduce. It is recommended to clean the filter onc e every two weeks or as needed. 1) Remove the filter from[...]

PROBLEM The Air Conditioner will not start POSSIBLE CAUSES The air conditioner is unplu gged or not connected well. The fuse is blown/circuit breaker is tripped. Power Failure The current interrupter device is tripped. SOLUTIONS • Make sure the air conditio ner plug is pushed completely into the out- let • Check the house fuse/ci rcuit breaker [...]

PROBLEM The LCD Display is showing “E5” POSSIBLE CAUSES Low Voltage Protection SOLUTIONS • Unplug for 10 minutes and then turn on the unit. If “E5” is still dis- played, contact customer service. TROUBLESHOOTING (CONT .) The LCD Display is showing “H8” The backup water tank is full • Drain the water tank • If the “H8” I still [...]

W ARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Mobile Comfort Portable Ai r Conditioner to be free of defects in material and workmanship for the applications specified in its oper ation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhib[...]