Suzuki Grand Vitara (2007) инструкция обслуживания

Part No. 99011-66J21-03E June, 2006 O WNER’S MANU AL 99011-66J21-03E GRAND VITARA Printed in Japan See page 1-1 12.5 mm Keep With Vehicle At All Times. Contains Important Information On Safety, Operation & Maintenance. SERVICE STATION INFORMATION Fuel recommendation: Brake and clutch fluid: Engine oil recommendation: Automatic transmission fl[...]

66J21-03E Prepared by June, 2006 Part No. 99011-66J21-03E Printed in Japan TP286[...]

66J21-03E This owner’s manual applie s to the GRAND VITARA series: 66J001 NOTE: The illustrated model is one of the GRAND VITARA series. © COPYRIGHT SUZUKI MOTOR CORPORATION 2006[...]

66J21-03E INTRODUCTION Thank you for choosing SUZUKI and welcome to our growing family. Your choice was a wise one; SUZUKI prod ucts are a great value that will give you years of drivi ng pleasure. This Owner’s Manual was p repared to help you have a safe, enjo yabl e, and trouble -free experience with your SUZUKI. In it you wi ll learn about the[...]

66J21-03E SERVICE STATION GUIDE 1. Fuel (see section 1) 2. Engine hood (see section 5) 3. Tire changing tools (see section 5) 4. Engine oil dipstick <Yellow> (see section 9) 5. Automatic transmission fluid dipstick <Red> (see sectio n 9) 6. Engine coolant (see section 9) 7. Windshield washer fluid (see section 9) 8. Battery (see section[...]

66J21-03E TABLE OF CONTENTS California Proposition 65 Warning WARNING Engine exhaus t, some of it s constitu- ents, and certai n product compo- nents contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. FUEL RECOM MENDATION 1 BEFORE D RIV ING 2 STEERI NG COL UMN CONTROLS 3 INSTRUME[...]

66J21-03E LOCATION OF WARNING MESSAGES Read and follow all of the warnings (lab els etc.) on your vehicle. Make sure you understand all of th em. Keep them on the vehicle. Do not remo ve the messages for any reason. If a label comes off or the messages become difficult to be read, have it correcte d by your SUZUKI dealer. 1. Air bag warning l abels[...]

0-1 66J21-03E FOREWORD Your SUZUKI multip urpose vehi cle is designed and built to be capa ble of per- forming both on pavement and off road. You should therefore remember that your vehicle is distinctly different from ordinary passenger cars in hand ling as well as in structure. As with ot her vehicles of this type, failure to operate this vehicle[...]

0-2 66J21-03E If you purchased your SUZUKI in Canada please cont act the Suzuki Canada Cus- tomer Relations Department by telephone at 1-905-889-2677 exten sion 2254 or in writin g at: Suzuki Canada Inc. Customer Rel ations 100 East Beaver Cr eek Road Richmond Hill, On L4B 1J6 In the event you require assistance related to your SUZUKI, while tempor[...]

0-3 66J21-03E MODIFICATION WARNING LEAK DETECTION PUMP NOTE: Your vehicle has a pump to regularly check the vehicle’s evaporative e mission control system for leaks. This check is performed approximately five hours after th e engine is turned off. Duri ng this leak check, you may hear a sound coming from the vehicle for several minutes. This soun[...]

0-4 66J21-03E MEMO[...]

FUEL RECOM MENDATION 1 66J21-03E 65D394 FUEL RECOMMENDATION Fuel Recommendation ............... ......................... ................ 1-1[...]

1-1 FUEL RE COMMENDATI ON 66J21-03E Fuel Recommendation 60A004 Your vehicle requires re gular unleaded gasoline with a minimum rating o f 87 pump octane ((R + M)/2 method). In some areas, the only fuels th at are available are oxy- genated fuel s. Oxygenated fuels whic h meet the mini- mum octane requireme nt and the require- ments described below [...]

BEFORE D RI VING 2 66J21-03E 60G404 BEFORE DRIVING Keys .............. ...................... ......................... ....................... .. 2-1 Spare Tire Nut Lo ck (if equipped) ................ ...................... 2-1 Door Locks ............. ...................... .......................... ............. 2-2 Windows ...... ............[...]

2-1 BEFORE DRIVING 66J21-03E Keys 54G489 Your vehicle comes with a pair of ide ntical keys. Keep the spare key in a safe place. One key can open all of the locks on the vehicle. The key identification number i s stamped on a metal tag pr ovided with the keys. Keep the tag in a safe place. If you lose your keys, you will need this number to have new[...]

2-2 BEFORE D RI VING 66J21-03E Door Locks Side Door Locks 60A009 To lock a front door from outside the vehi- cle: • Insert the key and turn the top of the key toward the front of the vehicle, or • Turn the lock knob forward and close the door. To unlock a front door from outside the vehicle, insert the key and turn the top of the key toward the[...]

2-3 BEFORE DRIVING 66J21-03E Driver’s side 64J004 Front passenger’s side 66J012 (when using the power door l ocking switch) To lock or unlock all the doors simulta- neously, depress the front or rear of the switch respectively. NOTE: • If your vehicle is equ ipped with the key- less entry system, you can also lock or unlock all doors by ope r[...]

2-4 BEFORE D RI VING 66J21-03E • You can lock or unlock the doors by pushing the re quest switch on the door handle. For details, refer to the expla na- tion in this section. • You can start the engine w ithout using an ignition key. For details, refer to “Igni- tion Switch” in the “STEER ING COL- UMN CONTROLS” section and “Starting t[...]

2-5 BEFORE DRIVING 66J21-03E Keyless unlocking/ locking using the request switches 64J006 When the remote control ler is within the operating range describ ed in this section, you can lock or unl ock the doors by push- ing the request switch (1) on the door han- dle of the driver’s door, front passen ger’s door or rear door. To lock all doors w[...]

2-6 BEFORE D RI VING 66J21-03E • If a spare remote controller is in the vehi- cle, the request sw itches may not oper- ate normally. • The remote controller will only operate a request switch if it i s within the switch’s operating range. For example, if the remote controller is within the operating range of the driver’s door request switch[...]

2-7 BEFORE DRIVING 66J21-03E Reminder function 66J022 If the remote controller is n ot in the vehicle under the followi ng conditions, a buzzer sounds intermittently for abou t 2 seconds and the keyless start system indicator light on the instru ment cluster blinks in red: • When the vehicle speed is over 10 km/h (6 mph). • When one or more doo[...]

2-8 BEFORE D RI VING 66J21-03E 66J017 2) Repla ce the battery (1) (Lit hium disc type CR2032 or equivale nt) so its + ter- minal faces the bottom of the case as shown in the illustration. 3) Close the re mote controller firmly. 4) Make sure the door lo cks can be oper- ated with the remote controller. 5) Dispose of the used battery properly accordi[...]

2-9 BEFORE DRIVING 66J21-03E To program a new remote controller 1) Close all the doors of the vehicle . 2) Sit in the driver’s seat and confirm that the driver’s door is unlocked. 3) Insert the key into the ignition switch. 4) Complete steps 1 through 6 describ ed below within 25 seconds after step 3). 64J004 1. Push the power door locking swit[...]

2-10 BEFORE D RI VING 66J21-03E less entry system o perate properly by operating each remote controller. 1. For US A This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any inte rfer- ence received, inclu ding in[...]

2-11 BEFORE DRIVING 66J21-03E “PANIC” button (3) function This function is to get the attention of oth- ers. Press the “PANIC” button (3) for more than 1 second. The headlights and tai llights will blink for about 30 seconds. Also, the horn will sound intermittently for about 30 sec- onds at the same time. To cancel the “PANIC” mode, pr[...]

2-12 BEFORE D RI VING 66J21-03E Programming/removi ng a transmitter code yourself Your new vehicle was originally equ ipped with two transmitters. If you have lost one of the transmitters, you should change th e transmitter code in your vehicle’s memory as soon as possible for security. If you pu rchase additional trans- mitters, the new transmit[...]

2-13 BEFORE DRIVING 66J21-03E To change the old transmitter codes in your vehic le’s memory If you have lost one of the transmitters, you should change the transmitter codes in your vehicle’s memory as soon as possible for security. To remove one of the transmitter codes from your vehicle’s memory, first replace all three of the transmitter c[...]

2-14 BEFORE D RI VING 66J21-03E Rear Door If you can not unl ock the rear door due to a discharged battery or ma lfunction, follow the procedures be low to unlock the rear door from inside the vehi cle. 1) Remove the lugg age compartment cover. 2) Fold the rear seat forward for easier access. Refer to the “Folding Rear Seats” section for detail[...]

2-15 BEFORE DRIVING 66J21-03E Passenger’s door 66J164 The passenger’s door has a switch (3) to operate the passenger’s window. 81A009 To open a window, push the top part of the switch and to close the window li ft up the top part of the switch. The driver’s window has an “auto-down” feature for added conve nience (at toll booths or driv[...]

2-16 BEFORE D RI VING 66J21-03E Mirrors Inside Rearview Mirror 65D410 65D409 You can adjust the inside rearview mirror by hand so as to see the rear of your vehi- cle in the mirror. To adjust the mirror, set the selector tab (1) to the day position, then move the mirror up, down or sid eways by hand to obtain the best view. When driving at night, y[...]

2-17 BEFORE DRIVING 66J21-03E Outside Rearview Mirrors 64J014 Adjust the outside rearview mirrors so you can just see the side of your vehicle in the mirrors. The passenger’s side mi rror is a convex (curved surface) mirror. Objects seen in this mirror will look small er and appear far- ther away than when seen in a flat mirror. Power Mirror Cont[...]

2-18 BEFORE D RI VING 66J21-03E Adjusting Seat Position Front seat 64J016 The adjustment lever for each front seat is located under the front of the seat. To adjust the seat position, pull up on the adjustment lever and slide the se at forward or rearward. After adjustment, try to move the seat forward and rearward to e nsure that it is securely la[...]

2-19 BEFORE DRIVING 66J21-03E Rear seat 64J019 To adjust the seatba ck angle of the rear seats: 1) Pull up the lever on the top of a split folding seat. 2) Move the seatback to one of the lock positions. The numbe r of the lock posi- tions depends on the vehicle specifica- tion. 3) Release the lever to lock the seatback in position. After adjustmen[...]

2-20 BEFORE D RI VING 66J21-03E 1) Insert a sharp-pointed tool into the small hole (2). Push the tip into the hole (2) and hold it while pushing in the release knob (1). 2) Pull the head restraint all the way out while pushing the relea se knob (1) and holding the tip in the hole (2). NOTE: It may be necessary to recline the seat- back to provide e[...]

2-21 BEFORE DRIVING 66J21-03E 65D606 65D201 65D199 WARNING • Never allow persons to ride in the cargo area of a vehi cle. In the event of an accident, there is a much greater risk of injury for persons who are not riding in a seat with their seat belt securely fastened. • Seat belts should always be adjusted as follows: – the lap porti on of [...]

2-22 BEFORE D RI VING 66J21-03E Lap-Shoulder Belt Emergency Locki ng Retractor (ELR) The lap-shoulder seat belt ha s an emer- gency locking retractor (ELR), which is designed to lock the seat be lt only during a sudden stop or i mpact. It also may lock if you pull the belt ac ross your body very quickly. If this happens, let the belt go back to unl[...]

2-23 BEFORE DRIVING 66J21-03E Safety reminder 60A038 60A040 To reduce the risk of sliding under the belt during a collision, positio n the lap portion of the belt acro ss your lap as low on your hips as possible and a djust it to a snug fit by pulling the should er portion of the belt upward through the la tch plate. The length of the diagonal shou[...]

2-24 BEFORE D RI VING 66J21-03E 52D249 NOTE: The word “CENTER” is molded into the buckle for the rear seat center belt. The buckles are designed so a l atch plate can not be inserted into the wrong buckle. 60A039 To unfasten the belt, push the red “PRESS” button on the buckle and allow the belt to retract. Seat Belt Reminder Driver’s seat[...]

2-25 BEFORE DRIVING 66J21-03E When the driver and fron t passenger don’t buckle their seat belts, the driver’s seat belt reminder light in the instrument cluster and the front passenge r’s seat belt reminder light in the center of the in stru- ment panel will come on and a buzzer wi ll sound as a reminder to the driver and fron t passenger to[...]

2-26 BEFORE D RI VING 66J21-03E Driver’s seat belt r eminder If the driver’s seat belt remains unbu ckled with the igni tion key in the “ON” position, the driver’s seat belt reminder works as fol- lows: 1) The driver’s seat belt reminder light wi ll come on for about 20 seconds when the ignition key is turned to the “ON” position th[...]

[...]

2-28 BEFORE D RI VING 66J21-03E Infant restraint - rear seat on ly 65D584 Booster seat 65D203 SUZUKI highly recommends that you use a child restrain t system to rest rain infants and small children. Many different typ es of child restraint systems are available; make sure that the restra int system y o u select meets Federal Motor Vehicle Safety St[...]

2-29 BEFORE DRIVING 66J21-03E 65D607 65D608 65D609 Installation with Lap-Shoulder Seat Belts (Child Restraint with No Top Strap) 83E031 Install your child re straint system accord- ing to the instructions provid ed by the child restraint system manufa cturer. If you install the child restraint system in the front seat, be sure to slide the seat to [...]

2-30 BEFORE D RI VING 66J21-03E 83E035 1) Pull all of the remaining webb ing out of the retractor. You will hear a click, which means that the emergency locking retractor (ELR) has converted to func- tion as an automatic locking retractor (ALR). 83E032 2) Allow the extra webbing to retract, and pull the webbing toward the retractor to take up any s[...]

2-31 BEFORE DRIVING 66J21-03E 65D234 65D235 4) Try moving the child restraint system in all directions, to make sure it is securely installed. If you need to tig hten the belt, pull more webbing toward the retractor. To revert from ALR to ELR 65D267 When you unbuckle the seat belt a nd allow it to retract to a certain length, the retractor will aut[...]

2-32 BEFORE D RI VING 66J21-03E and Tethers for Children.) The anch ors are located where the rear o f the seat cushion meets the bottom of the seatback. Install a LATCH-type child restraint system according to th e instructions provided by the child restraint system manufacturer. After installing the ch ild restraint system, try moving it in all d[...]

2-33 BEFORE DRIVING 66J21-03E 65D342 5) Make sure the child restraint is securely fastened by trying to move the child restraint system in all directions, espe- cially forward. If your LATCH restraint has rigid lower con- necting bars, these general instructi ons apply: 1) If possible , fold the seatback rearward for easier installation. 2) Place t[...]

2-34 BEFORE D RI VING 66J21-03E 54G185 5) Grasp the front of the child restraint an d push the child rest raint forcefully to latch the connecting bars. Make sure they are securely latched by trying to move the child restraint system in all directions, especial ly forward. 6) Return the seatback if folded. Attach the top tether str ap, if applicabl[...]

2-35 BEFORE DRIVING 66J21-03E how to raise or lower the head restraint.) 5) Make sure that cargo does not interfere with routing of the top strap. Seat Be lt Extender 65D613 (1) Center of body (2) Less than 152 mm (6 inches) (3) Open end of exten der buckle If a seat belt cannot be fastened securely because it is not long e nough, see your authoriz[...]

2-36 BEFORE D RI VING 66J21-03E Seat Belt Pretension er System (for front seat belt only) 52D011 Your vehicle is equipped with a seat belt pretensioner system at the front seating positions. You can use the pretensioner seat belts in the same manner as ordinary seat belts. The seat belt pret ensioner system works with the SUPPLEMENTAL RESTRAINT SYS[...]

2-37 BEFORE DRIVING 66J21-03E tions and precautions about the seat belts in this “Seat Belts and Child Restraint Sys- tems” section for details on prope r seat and seat belt adjustments. Please note that the pretensioners alo ng with the front air bags will activate only in severe frontal collision s. They are no t designed to activate in rear [...]

2-38 BEFORE D RI VING 66J21-03E 66J126 1 2 8 3 5 8 9 3 4 7 10 10 6 66J132 Your vehicle is equipped wi th a Supple- mental Rest raint System consisting of the following components i n addition to a lap- shoulder belt at each front seating position. 1. Driver’s front air bag 2. Front passenger’s front air bag 3. Seat belt pretensione rs 4. Air ba[...]

2-39 BEFORE DRIVING 66J21-03E 63J030 If the “AIR BAG” light on the instrument cluster does not b link when the igni tion switch is first turned to the “ON” position, or the “AIR BAG” light stays on, or comes on while driving, the air bag system (or the seat belt pretensi oner system) may not work properly. Have the ai r bag system inspe[...]

2-40 BEFORE D RI VING 66J21-03E Front air bags will no t inflate 65D236 Front air bags will pro b ably not inflate 65D237 They are not designed to in flate in rear impacts, si de impact s, rollovers or minor frontal collisions, since they would offer no protection i n those types of accidents. Remember, since air bags deplo y only one time during a[...]

2-41 BEFORE DRIVING 66J21-03E side air bag cover to identify th e location of the side air bags. 64J034 Side curtain air bags are located i n the roof lining. The words “SRS AIRBAG” are molded into the pillar to identi fy the loca- tion of the side curtain air bags. Side collision range 64J036 Side air bags and side curtain air bags will not in[...]

2-42 BEFORE D RI VING 66J21-03E Front Passenger Sensing System The front passenger sensing system will turn off the front passeng er’s front air bag and seat belt pretensioner unde r certain conditions. This system works using a sen- sor mat that is part of the front passenger’s seat. The front passeng er sensing system is designed to detect wh[...]

2-43 BEFORE DRIVING 66J21-03E bag will not deploy and th e seat belt pre- tensioner will not operate. If you have secured a chil d in the front pas- senger seat in a fo rward-facing child restraint system or booster seat and the “PASS AIR BAG OFF” indicator light is not on, turn the vehicle off, remove th e child restraint or booster seat from [...]

2-44 BEFORE D RI VING 66J21-03E When using a seat belt extender, fo llow the instructions in the “Seat Belt Extender” section. How the System Works In a frontal collision , the crash sensors will detect rapid decel eration and send a signal to the controller. If the controller jud ges that the deceleration re presents a severe frontal crash, th[...]

2-45 BEFORE DRIVING 66J21-03E the facial area ag ainst a front air bag. Also, upon inflati on, a loud noise will occur and some powder and smoke will be released . These conditions are not harmful and do not indicate a fire in the car. Be aware, however, that some air bag components may be hot for a while after inflation. A seat belt helps keep you[...]

2-46 BEFORE D RI VING 66J21-03E Note that e ven though your vehicl e may be moderately damaged in a collisi on, the col- lision may not have been severe enough to trigger the front, side, or side curtain air bags to inflate. If your car sustains ANY front-end or side damage, h ave the air bag system inspected by an authorized SUZUKI dealer to ensur[...]

2-47 BEFORE DRIVING 66J21-03E MEMO[...]

INSTRUMENT PANE L 4 66J21-03E 60G406 INSTRUMENT PANEL Instrument Panel ....... ......................... ......................... ........ 4-1 Instrument Cluster .... ......................... ......................... ........ 4-2 Warning and Ind icator Lights ..... .......................... ............. 4-3 A/T Selector Position Indicator (if [...]

4-1 I NSTRUMENT P ANEL 66J21-03E Instrument Panel 1. Instrument cluster 2. Ignition switch 3. Lighting switch/Turn signal and dim- mer switch 4. Windshield wiper and washe r switch/ Rear window wiper an d washer switch 5. Hazard warning switch 6. Other switches (if equipped) 7. Heater control pa nel/Climate control panel 8. Audio system (if equippe[...]

4-2 INSTRUMENT PANE L 66J21-03E Instrument Cluster 1. Speedometer 2. Odometer/Tripmeter 3. Odomete r/Tripmeter selector and meter illumination cancel knob 4. Tachometer 5. Fuel gauge 6. Temperature gauge 7. Warning and indicator lights 66J212 4 72 7 36 15 EXAMPLE Instrum ent C l uste r: 8[...]

4-3 I NSTRUMENT P ANEL 66J21-03E Warning and Indicator Lights Front Passenger’s Seat Belt Reminder Light 66J030 The front passenger’s seat belt reminder light is located in the center o f the instru- ment panel. If there is a passenger in the front seat and the front passenge r’s seat belt is unbuckled about 10 seconds after the ignition swit[...]

4-4 INSTRUMENT PANE L 66J21-03E inflation pressure as specified i n the vehi- cle placard a nd owner’s manual. The low tire pressure warnin g light is also used to inform you of a TPMS ma lfunction. When the system detects a malfunction, this light will flash for appro ximately one minute and then remain co ntinuously illu- minated. This sequence[...]

4-5 I NSTRUMENT P ANEL 66J21-03E Brake System Warning Light 65D477 This light comes on bri efly when the igni- tion switch is turned to the “ON” position. The light also come s on under the fol low- ing conditions: 1) when the p arking brake is engaged, and 2) when the fluid in the brake fluid reservoir fall s below the speci- fied level. The l[...]

4-6 INSTRUMENT PANE L 66J21-03E SLIP Indicator Light 66J033 ESP ® is a registered trademark o f DaimlerChrysler AG. This light blinks 5 times per second when one of the ESP ® systems other than ABS is activated. If this light blinks, drive care- fully. When the ignition sw itch is turned to the “ON” position, the l ight comes on briefly so yo[...]

4-7 I NSTRUMENT P ANEL 66J21-03E systems (other than ABS) will turn on automatically and the light will go out. For details of the ESP ® systems, refer to “Electronic Stability Program (ESP ® )” in the “OPERATING YOUR VEHICLE” sec- tion. Oil Pressure Light 50G051 This light comes on when the igniti on switch is turned to the “ON” posi[...]

4-8 INSTRUMENT PANE L 66J21-03E “AIR BAG” Light 63J030 This light monitors inflators, crash sen sors, seat belt pretensioners, the fron t passen- ger sensing system, and corresponding electrical circuits. This light blinks for several seconds when the ignition switch is turned to the “ON” position so you can check if the light is working. T[...]

4-9 I NSTRUMENT P ANEL 66J21-03E Low Fuel Warning Light 54G343 If this light comes on, fill the fuel tank immediately. NOTE: The activation point of this light varies depending on road conditions (for exam- ple, slope or curve ) and driving cond itions because of fuel moving in the tank. Open Door Warning Light 54G391 This light remains on until al[...]

4-10 INSTRUMENT PANE L 66J21-03E Turn Signal Indicators 50G055 When you turn on the left or right turn sig- nals, the corresponding green arrow o n the instrument panel will flash along with the respective turn signal lights. When you turn on the haza rd warning switch, both arrows will flash along with all of the turn signal ligh ts. High Beam Ind[...]

4-11 I NSTRUMENT P ANEL 66J21-03E (1): Neutral (2): 4-wheel drive hi gh range center differ- ential lock mode (2) & (3): 4-wheel drive low range center differenti al lock mode No indicators: 4-wheel drive high ran ge mode For details, refer to “U sing the Transfer Switch” in the “OPER ATING YOUR VEHI- CLE” section. If the indicators (al[...]

4-12 INSTRUMENT PANE L 66J21-03E 64J049 When the ignition sw itch is turned to the “ON” position, the di splay shows the odometer or trip meter. The display shows thre e types of indica- tion; odometer, trip meter A and trip meter B. Push the selector knob (3) quickly to switch the indication among the three. You can use the two trip meters (A [...]

4-13 I NSTRUMENT P ANEL 66J21-03E meter brightness becomes di mmest and the other instrument panel li ghts are turned off. To brighten the instrument panel lights, turn the knob (3) clockwise. To cancel the autom atic dimming feature and maintain full brightness, turn th e knob (3) clockwise to position (5). Tachometer 64J051 The tachometer indicat[...]

4-14 INSTRUMENT PANE L 66J21-03E tions (for example, sl ope or curve) and driving condi tions because of fuel moving in the tank. The mark (2) indicates that the fuel filler door is locate d on the right si de of the vehi- cle. Temperature Gauge 64J053 When the igniti on switch is in the “ON” position, this gauge indicates the engine coolant te[...]

4-15 I NSTRUMENT P ANEL 66J21-03E Hazard Warning Switch 64J054 Push in the hazard warning switch to acti- vate the hazard warni ng lights. All four turn signal lights and both turn signal in dicators will flash si multaneously. To turn off the lights, push the switch again. Use the hazard warning lights to warn other traffic during emergency parkin[...]

4-16 INSTRUMENT PANE L 66J21-03E Front Fog Light Switch (if equipped) 64J058 The front fog light comes on when the fog light switch is pushed in with: • the lighting switch turn ed to the third position and the beams set to the l ow beam position, or • the auto-on headligh t system on and the beams set to the low beam position. “ESP OFF” Sw[...]

4-17 I NSTRUMENT P ANEL 66J21-03E Transfer Switch (if equipped) 66J168 The transfer switch is located on the center of the instrument panel. For details on how to use this switch, refer to “Using the Transfer Switch” in the “OPERATING YOUR VEHICLE” section. Glove Box 64J065 To open the glove b ox, pull the latch leve r. To close it, push th[...]

4-18 INSTRUMENT PANE L 66J21-03E quickly, hold in the “H” button (4) for about 1 second and continu e holding. • To set the minute display, push the “M” button (5) repea tedly to advance the minute display. To a dvance the minute display quickly, hold in the “M” button (5) for about 1 second and continue holding . Thermometer (2) The [...]

4-19 I NSTRUMENT P ANEL 66J21-03E Instantaneous fuel consumption (a) If you selected instan taneous fuel con- sumption th e last time you drove the vehi- cle, the display indi cates “--.-” when the ignition switch is turned to the “ACC” or “ON” position. Unless the ve hicle is mov- ing, the display will indicate “--.-”. Average fuel[...]

4-20 INSTRUMENT PANE L 66J21-03E Driving ra nge 66J202 3) Push the “DISP” bu tton (6) quickly to change the display as shown i n the above illustrations. 4) Push the “DISP” button (6) for more than 2 seconds, and the unit display wi ll stop blinking and the display will stay on. If you don’t push the “DISP” button (6) within about 8 s[...]

4-21 I NSTRUMENT P ANEL 66J21-03E Air Outlet (front) 64J066 1. Windshield defro ster outlet 2. Side defroste r outlet 3. Side outlet 4. Center outl et 5. Floor outlet 1 1 2 2 3 3 5 5 5 5 4 EXAMPLE Center ou tlet 64J199 Close Open EXAMPLE Heati ng and Air Condit ioni ng System: 4[...]

4-22 INSTRUMENT PANE L 66J21-03E Side outlet 63J045 When “Open”, air comes out from the si de outlets regardless of the air flow selector position. Heating System Description of Controls 64J067 Temperatu re selector (1) This is used to select th e temperature by turning the selector. Blower speed selector /Air intake selec- tor (2) This is used[...]

4-23 I NSTRUMENT P ANEL 66J21-03E you should occasionally se lect “FRESH AIR”. Air flow selector (3) 64J068 This is used to select one of the functions described below by p u shing the selector. The indicator light of the selected mode will come on. Ventilation (c) 64J069 Temperature-controlled air comes out o f the center and side air ou tlets[...]

4-24 INSTRUMENT PANE L 66J21-03E System Operating Instructions Natural venti lation Select “VENTILATION” and “FRESH AIR”, the temperature selector to the desired temperature position, and the blower speed selector to “OFF”. Fresh air will flow through the vehicle during driving . Forced ventilation The control settings are the same as f[...]

4-25 I NSTRUMENT P ANEL 66J21-03E Automatic Heating and Air Conditioning System (Climate Control) Description of Controls 66J042 Temperatur e selector/Air conditi oning switch (1) 66J043 This is used to select th e temperature by turning the selector. Also, this is used to turn on and off the air conditioning system by pushing the switch. To turn o[...]

4-26 INSTRUMENT PANE L 66J21-03E 64J134 RECIRCULATED AIR When this mode i s selected, the indicator light (a) will co me on, outside ai r is shut out and inside air is recirculated. This mode is suitable when driving throug h the polluted air such as a tun nel, or attempting to quickly cool down. FRESH AIR When this mode i s selected, the indicator[...]

4-27 I NSTRUMENT P ANEL 66J21-03E Heat (e) 64J071 Temperature-controlled air comes out o f the floor outlets an d the side outlets, also comes out of the windshield defroster out- lets and the side defroster outlets sligh tly. Heat & defrost (f) 64J072 Temperature-controlled air comes out o f the floor outlets, the windshield defroster outlets,[...]

4-28 INSTRUMENT PANE L 66J21-03E When you turn the air conditionin g switch off, the climate co ntrol system cannot lower the in side temperature b elow outside temperature. To turn the climate control system off, turn the blower speed selector (2) to the “OFF” position. NOTE: • To find your comfortable zone, start with the 25°C (75°F) sett[...]

4-29 I NSTRUMENT P ANEL 66J21-03E Maintenance If you do not use the air conditioner for a long period, such as during winter, it may not give the best performance when you start using it again. To he lp maintain opti- mum performance and durability of your air conditioner, it needs to be ru n periodically. Operate the air condi tioner at least once[...]

4-30 INSTRUMENT PANE L 66J21-03E Precautions • When the inside of the car is very cold and the player is used soon after switch- ing on the heater, moisture may form on the disc or the opti cal parts of the player and proper playback may n ot be possi- ble. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the opt[...]

4-31 I NSTRUMENT P ANEL 66J21-03E 52D348 Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. 52D349 Do not use any solven ts such as commer- cially available cleaners, anti-static spray, or thinner to clean compact discs. 52D350 Do not use co mpact discs that have large scratches, are misshaped, or cracke[...]

4-32 INSTRUMENT PANE L 66J21-03E Basic Operations 66J215 (1) (2) (3) (4) (1) (2) (3) (4) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL (1) Power on/off knob Volume control knob (2) Tone/balance/fader contro l knob (3) Preset button 5 (4) Preset button 6 Audio Syst ems:[...]

4-33 I NSTRUMENT P ANEL 66J21-03E Turning p ower on/off Press the power on/off knob (1). The unit start s in the func tion mode it was in when the power was turned off last. Adjusting th e volume Turn the volume control knob (1). Turning it clockwise increases the volume; turning it counterclockwise decreases the volume. NOTE: While driving, adjust[...]

4-34 INSTRUMENT PANE L 66J21-03E Listening to the Radio 66J216 (1) (4) (6) (2) (3) (5) (1) (4) (6) (2) (3) (5) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL Display 66J097 (1) Band switch b utton (FM/AM) (2) Seek up button (3) Seek down button (4) Manual tuning knob (5) Preset buttons (1 to 6[...]

4-35 I NSTRUMENT P ANEL 66J21-03E Selecting the reception band Press the band switch button (1). Each time the button is pressed, the recep- tion band is switche d as follows: 66J098 Seek tuning Press the seek up button (2) or th e seek down button (3). The unit stops searchin g for a station at a frequency where a broadcast stati on is available. [...]

4-36 INSTRUMENT PANE L 66J21-03E Radio Antenna 63J055 The radio antenna on the roof is remov- able. To remove the an tenna, turn it coun- terclockwise. To reinstall the antenna, turn it clockwise firmly by hand. Listening to a CD 52D274 • CDs or CD-ROMs carrying no mark (A) cannot be used. • Some discs previously recorded in CD- RCD-RW format [...]

4-37 I NSTRUMENT P ANEL 66J21-03E Type 1 AM/FM/XM CD PLAYER WITH CD CHANG ER CONTROL (Built in CD Player) 66J099 (3) (6) (4) (2) (1) (5) Display 66J100 (1) CD insertion slot (2) CD eject button (3) Disc button (CD/AUX) (4) Track up butt on/Fast forward button (5) Track down button/Rewind button (6) Repeat button (RPT) (A) Mode indicato r (B) Track [...]

4-38 INSTRUMENT PANE L 66J21-03E NOTE: About Single CDs (8 cm C Ds) • No adapter is re quired to play a sing le CD. • A single CD is inse rted from the center of the CD insertion slot. • Since an ejected single CD is not auto- matically reloaded, be sure to remove the ejected singl e CD. Loading a CD Insert a CD in the CD insertion slot (1). [...]

4-39 I NSTRUMENT P ANEL 66J21-03E Type 2 AM/FM/XM 6-CD PLAYER WITH CD CHAN GER CONTROL (Built-in CD Changer) 66J217 (2) (5) (1) (8) (6) (4) (3) (7) Display 66J102 (1) Load button (LOAD) (2) Disc select buttons (1 to 6) (3) CD insertion slot (4) CD eject button (5) Disc button (CD/AUX) (6) Track up butt on/Fast forward button (7) Track down button/R[...]

4-40 INSTRUMENT PANE L 66J21-03E NOTE: About Single CDs (8 cm C Ds) • Since the uni t is not compatibl e with a single CD, do not load it into the unit. • Keep in mind the fact that a single CD cannot be played even using a sing le CD adaptor for the unit. • When a single CD is loaded into the unit accidentally, it will be ejec ted immedi- at[...]

4-41 I NSTRUMENT P ANEL 66J21-03E Ejecting all the CDs Press the CD eject button (4) for 2 sec- onds or longer. All the CDs will be e jected from the unit in a sequential manner. • Please prepare a location where removed CDs can be stored. • If you leave the ejected CD withou t removing it, it will be drawn into the unit automatically afte r ab[...]

4-42 INSTRUMENT PANE L 66J21-03E Listening to an MP3/WMA Disc 66J218 (1) (2) (3) (4) (1) (2) (5) (3) (4) (5) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL Display (Type 1) 66J104 Display (Type 2) 66J105 (1) Sound control knob (2) Repeat button (RPT) (3) Track up butt on/Fast forward button (4[...]

4-43 I NSTRUMENT P ANEL 66J21-03E MP3/WMA MODE Selecting a folder Turn the sound control knob (1) to select a folder. Repeat play Press the repeat button (2). Each time the bu tton is pressed, repeat play mode changes as follows: Type 1 66J128 Type 2 66J145 NOTE: This operation should be performed within 2 seconds. To cancel repeat play, press the [...]

4-44 INSTRUMENT PANE L 66J21-03E Listening to a XM Sate llite Radio (Option) 66J219 (5) (2) (8) (6) (3) (4) (7) (1) (5) (2) (8) (6) (3) (4) (7) (1) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL Display 66J107 (1) XM button (2) Catego ry button (CAT) (3) Seek up button (4) Seek down button (5)[...]

4-45 I NSTRUMENT P ANEL 66J21-03E XM MODE Selecting a band Press the XM button (1). Each time the button is pressed, the band changes in the fol lowing order. 66J129 Selecting a category Press the seek up button (3) or th e seek down button (4). The category is changed. Turning the cat e gory function on /off Press and hold the catego ry button (2)[...]

4-46 INSTRUMENT PANE L 66J21-03E Listening to Audio for AUX (Option) 66J220 (1) (1) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL Display 66J221 (1) Aux button (CD/AUX) (A) Mode indicato r Aux function This system has an external input terminal so you can listen to au dio from an external dev[...]

4-47 I NSTRUMENT P ANEL 66J21-03E Listening to a CD from an Ex ternal CD Changer (Option) 66J222 (6) (5) (1) (3) (4) (2) (6) (5) (1) (3) (4) (2) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL Display 66J113 (1) Disc button (CD/AUX) (2) Disc select buttons (1 to 6) (3) Track up butt on/Fast for[...]

4-48 INSTRUMENT PANE L 66J21-03E Selecting a CD changer mode Press the disc button (1). Each time the button is pressed, th e selected CD plays as follows: 52D300 • When only one CD changer is con- nected to this unit, CD changer 2 is skipped. • When no CD is loaded in the built-in CD player, the built-in CD player is skipped. Selecting a disc [...]

4-49 I NSTRUMENT P ANEL 66J21-03E Repeat play Press the repeat button (5). Each time the bu tton is pressed, repeat play mode changes as follows: 66J144 NOTE: This operation should be performed within 2 seconds. To cancel repeat play, press the repeat button (5) se veral times to change the repeat play mode to OFF. • TRACK REPEAT The indication ?[...]

4-50 INSTRUMENT PANE L 66J21-03E Remote Audio Controls (if equipped) 64J041 You can control basic functions of the audio system wi th the switches on the steering wheel. To control the volume: • To increase the volume, push the upper part of the switch (1 ). The volume contin- ues to increase until you rele ase the switch. • To decrease the vol[...]

4-51 I NSTRUMENT P ANEL 66J21-03E Anti-Theft Feature 66J223 (1) (2) (3) (1) (2) (3) Type 1 AM/FM/XM CD PLAYER WITH CD CHANGER CONTROL Type 2 AM/FM/XM 6-CD PLA YER WITH CD CHANGER CONTROL (1) Power on/off knob (2) Track up butt on/Fast forward button (3) Preset buttons (1 to 6) The anti-theft feature is inten ded to dis- courage theft or the audio s[...]

4-52 INSTRUMENT PANE L 66J21-03E Setting the Anti-Theft Function 1) Turn off the power by pressing the power on/off knob (1). 66J118 2) Press the power on/off knob (1) while pressing and holding th e track up but- ton (2). The “ENTRY 0000” will blink and the audio system enter PIN-input mode. NOTE: Establish your PIN by comb ining numbers from [...]

4-53 I NSTRUMENT P ANEL 66J21-03E 66J124 3) Input your PIN. The power of the audio system will turn off and your PIN will be deleted. To change your PIN, first delete your current PIN, then set a new one. Confirming Your Personal Identifi- cation Number (PIN) When the main powe r source is discon- nected such as when you exchange your battery, etc,[...]

4-54 INSTRUMENT PANE L 66J21-03E Troubleshooting Applicable to every device Radio CD Phenomenon Cause Remedy Power is not turned on. (No sound is pro duced) Fuse is blown. Contact your authorized SUZUKI dealer. Connections are not properly made. Contact your authorized SUZUKI dealer. Phenomenon Cause Remedy Too much noise. Not tuned correctly to th[...]

4-55 I NSTRUMENT P ANEL 66J21-03E Error display This unit has a number of self-diagnosti c functions to protect the system. If a problem should occur, the display sho ws the type of error. Refer to the tabl e below and take pr oper measures to correct th e pr oblem. If the problem is correcte d, the unit will operate n ormally. If an error display [...]

DR IVIN G T IPS 7 66J21-03E 60G409 DRIVING TIPS Important Vehicle Design Features To Know ................. .. 7-1 On-Pavement Driving ...................... ......................... ........... 7-2 Off-Road Driving . ............................ ............................ ........ 7-4[...]

7-1 DR IVIN G T IPS 66J21-03E 52D078S Important Vehicle Design Features To Know Multipurpose vehicles such as your n ew SUZUKI have higher ground clearance and a narrower track than conventio nal pas- senger cars, to make them capable of per- forming in a wide variety of off-road applications. Specific design characteris- tics give them a higher ce[...]

7-2 DR IVIN G T IPS 66J21-03E Shorter Wheelbase Along with its higher ground clearance, your vehicle has a shorter wheelbas e and shorter front and rea r overhangs than many passenger cars. These features combine to allow you to drive your vehicle over hillcrests witho ut hanging up on them or damaging the frame and chassis com- ponents. The shorte[...]

7-3 DR IVIN G T IPS 66J21-03E Don’t Make Sharp Turns As mentioned before, small multipurpose vehicles have spe cific design characteris- tics that allow them to perform in a wide variety of applications. These characteris- tics also change the corne ring behavior relative to conventional passenger ca rs. Remember, small multipurpose veh icles hav[...]

7-4 DR IVIN G T IPS 66J21-03E Off-Road Driving Your vehicle has specific design chara cter- istics for off-road driving. Wh en you leave the pavement, you will encounter drivi ng surfaces of all kinds which may change continually as you dri ve. In most cases, off- road driving require s the use of 4-wheel drive. If your vehicle is a 2-wheel drive v[...]

7-5 DR IVIN G T IPS 66J21-03E Tire Chains Tire chains sho uld only be used if th ey are needed to increase traction or are required by law. Make sure that the chains you use are small-link chain s or cable-type chains and are the correct size fo r your vehicle’s tires. Also make sure that there is enough clearance between the fenders and the chai[...]

7-6 DR IVIN G T IPS 66J21-03E WARNING In addition to f ollowing the driving tips in this section, it is important to observe the following precautions for on-road and off-road driving. • Driver and passenge rs shou ld wear seat belts at all times. • Do not let anyone else drive your vehicle unless they are also aware of the vehicle characterist[...]

7-7 DR IVIN G T IPS 66J21-03E MEMO[...]

VEHI CLE LOADI NG AND TOWI NG 8 66J21-03E 54G215 VEHICLE LOADING AND TOWING Vehicle Loading ............ ......................... ...................... ........ 8-1 Trailer Towing ............... ...................... ......................... ........ 8-2 Towing Your Vehicle (recreation al towing) ...... ................ 8-7[...]

8-1 VEHICLE LOADING AND TOW I NG 66J21-03E Vehicle Loading 54G307 Your vehicle was designed for specific weight capaci ties. The weight capaci ties of your vehicle are in dicated by the Gross Vehicle Weight Rating (GVWR), the Gross Axle Weight Rating (GAWR, front and rear) and the Vehicle Capacity Weight. The GVWR and GAWR (front and rear) are list[...]

8-2 VEHI CLE LOADI NG AND TOWI NG 66J21-03E Trailer Towing You can use your SUZUKI to tow a trai ler, but you should always observe th e require- ments and recommendations in this sec- tion. If you intend to tow a trailer, it is essential to select a trailer and tra iler tow- ing equipment which are comp atible. A reputable trailer dealer can hel p[...]

8-3 VEHICLE LOADING AND TOW I NG 66J21-03E Tires Mirrors Check to see if your vehicle’s mirrors meet federal, state and local re quirements for mirrors used on t owing vehicles. If they do not, you must install required mirrors before you tow. Vehicle/Trailer Weight Limits Before towing, you must make sure that gross trailer weight, gross combine[...]

8-4 VEHI CLE LOADI NG AND TOWI NG 66J21-03E Tongue Weight 60A380 Tongue Weight is the downward force exerted on the hitch by the tra iler coupler, with the trailer fu lly loaded and the coupler at its normal towing height. Cargo should be distributed so that tong ue weight is approxim ately 10% of gross trailer wei ght. NOTE: You can usually get to[...]

8-5 VEHICLE LOADING AND TOW I NG 66J21-03E Additional Trailer Towing Warnings WARNING Never over load your trailer or yo ur vehicle. Gros s Trailer Weight mu st never exceed 1350 kg (3000 pounds). Gross Combin ed Weight mus t never exceed 3400 kg ( 7500 pounds) fo r 2WD or 3450 kg (7600 pounds) for 4WD. Gross vehicle weight m ust never exceed the G[...]

8-6 VEHI CLE LOADI NG AND TOWI NG 66J21-03E 60A186 WARNING (Continued) • Avoid “riding” the brakes. “Riding” the brakes could cause the brakes to overheat, resulting in reduced braking efficiency. Use engine braking as much as possible . • Because of the added tr ailer weight, your engine may overheat on hot days w hen going up lo ng or[...]

8-7 VEHICLE LOADING AND TOW I NG 66J21-03E Towing Your Vehicle (recreational towing) Your vehicle may be towed behind an other vehicle (such as a motorho me), provided you use the proper towin g method speci- fied for your vehicle . The towing me thod you must use depends on the specifica- tions of your vehicle: whether it is a 2- wheel drive (2 WD[...]

8-8 VEHI CLE LOADI NG AND TOWI NG 66J21-03E Before towing 64J147 Vehicles equipped with a transfer switch may be towed from the front with all four wheels on the ground. Be sure to use proper towing equipmen t designed for rec- reational towing and make sure that towing speed does not e xceed 90 km/h (55 mph). To tow a vehicle equi pped with a tran[...]

8-9 VEHICLE LOADING AND TOW I NG 66J21-03E 7) Release the parking brake. Stop towing the vehicl e every 300 km (200 miles). Start the engine. Wi th the manual transmission lever in 2nd gear (or the auto- matic transmission lever in “D”) and the transfer switch in neu tral, rev the engi ne for about one minute with the clutch engaged (if equippe[...]

8-10 VEHI CLE LOADI NG AND TOWI NG 66J21-03E 4WD Vehicl e Without a Transfer Switch 54G586 54G585 64J234 You can not tow your vehicle b ehind another vehicle using recreational towi ng methods. 2WD Vehicle 1) Secure the rear wheels on a towing dolly according to the instructions pro- vided by the dolly manufacturer. 2) Turn the ignition key to th e[...]

8-11 VEHICLE LOADING AND TOW I NG 66J21-03E 52D082 TOWING METHOD B FRONT WHEELS ON THE GROUND AND REAR WHEELS ON A DOLLY. Towing Your Vehicl e (r ecreat ional towing) : 13[...]

IN SPECTI ON AND MAI NTE NANCE 9 66J21-03E 60G410 INSPECTION AND MAINTENANCE Maintenance Schedule ................ .......................... ............. 9-2 Periodic Main tenance Schedule . ................. ...................... 9-3 Drive Belt ................... ...................... ......................... ........... 9-7 Engine Oil and F[...]

9-1 INSPECTION AND MAINTENANCE 66J21-03E 60A187S WARNING You should take extreme care when working on your vehicle to prevent accidental injury. Here are a few pr e- cautions that you should be espe- cially careful to observe: • To prevent damage or unintended inflation of the air bag system, be sure the battery is disconnected and the ignition s[...]

9-2 IN SPECTI ON AND MAI NTE NANCE 66J21-03E NOTICE (for U.S.A.) Maintenance, r eplacement or repai r of the emission control devices and sys- tems may be perf ormed by any automo- bile repair establishment or individual using any par t which ha s been certified under the provisions in the Clean Air Act sec. 207. (a) (2). Maintenance Schedule The f[...]

9-3 INSPECTION AND MAINTENANCE 66J21-03E Periodic Maintenance Schedule R: Replace or change I : Inspec t and correct, replace or lubricate if necessar y Interval: This interval should be judged by odometer reading or months, which ever comes first. miles (x 1000) 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 k m ( x 1 0 0 0 ) 1 2 . 52 53 7 . 55 06 2 . 57 [...]

9-4 IN SPECTI ON AND MAI NTE NANCE 66J21-03E R: Replace or change I : Inspec t and correct, replace or lubricate if necessar y #1: Inspect at 2500 00 km (150000 mil es) or 180 months. NOTE: The maintenance services enclosed w ith rectangle are reco mmended maintenance items. Item 6 (R) is applicab le to the exhaust mounting rubber only. Interval: T[...]

9-5 INSPECTION AND MAINTENANCE 66J21-03E R: Replace or change I : Inspec t and correct, replace or lubricate if necessar y Interval: This interval should be judged by odometer reading or months, which ever comes first. miles (x 1000) 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 k m ( x 1 0 0 0 ) 1 2 . 52 53 7 . 55 06 2 . 57 58 7 . 5 1 0 0 1 1 2 . 5 1 2 5[...]

9-6 IN SPECTI ON AND MAI NTE NANCE 66J21-03E R: Replace or change I : Inspec t and correct, replace or lubricate if necessar y NOTE: This table shows the service schedule up to 250000 km (150000 miles). Beyond 250000 km (150000 miles), perform the same serv ices at the same intervals shown in the chart. Beyond 250000 km (150000 miles), th e mainten[...]

9-7 INSPECTION AND MAINTENANCE 66J21-03E Maintenance Recomm ended under Severe Driving Conditions If the vehicle is usually use d under the c onditions corresp onding to any severe condit ion code gi ven below, it is recommended t hat appli- cable maintenance operation be performed at the pa rticular interval shown in the chart belo w. Severe condi[...]

9-8 IN SPECTI ON AND MAI NTE NANCE 66J21-03E NOTE: I – Inspect and correct or replace if neces sary T – Tighten to the specified torque R – Replace or change L – Lubricate *1 Inspect more frequently if the v ehicle is used under dusty conditions . *2 Clean more frequently if the air flow from the air conditioner decrea ses. Severe Condition[...]

9-9 INSPECTION AND MAINTENANCE 66J21-03E Drive Belt Make sure the drive belt tension is correct. If the belt is too loo se, insufficient battery charging, engine overheating, p oor power steering, poor air conditio ning or excessive belt wear can result. When you press the belt with your thumb midway between the pulleys, there should be a defl ecti[...]

9-10 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Oil Level Check Engine oil dipstick 52D030 It is important to keep the engine oil at the correct level for pro per lubrication of your vehicle’s engine. Check the oil level with the vehicle on a level surface. The oi l level indication may be ina ccurate if the vehicle is on a slope. Th e oil level sh[...]

9-11 INSPECTION AND MAINTENANCE 66J21-03E Changing Engine Oil and Filter 60G306 Drain the engine oil while the engine is still warm. 1) Remove the oil filler cap. 2) Remove the engin e under cover. 3) Place a drain pan under the drai n plug. 4) Using a wrench, remove the drain plug and drain out the engine oil. 5) Reinstall the drain plug and ga sk[...]

9-12 IN SPECTI ON AND MAI NTE NANCE 66J21-03E 52D086 (1) Oil filter (2) Oil filter wrench (3) 3/4 turn 6) Tighten the filter 3/4 turn from the point of contact with the mounting su rface (or to the specified torque) using an o il filter wrench. 7) Reinstall the engine under cover. Refill with Oil and Check for Leaks 1) Pour oil through the filler h[...]

9-13 INSPECTION AND MAINTENANCE 66J21-03E Gear Oil Specified G ear Oil When replacing ge ar oil, use gear oil with the appropriate viscosity a nd grade as shown in the charts below. We highl y rec- ommend you use SAE 75W-90 gear oil (SAE 80W-90 for front differential oil, rear differential oil and transfer gear oil). Transmission/Extension case 54G[...]

9-14 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Extension case (2WD) 66J165 (1) Oil filler and level plug (2) Oil drain plug Front differential 66J006 Rear differential 66J007 (1) Oil filler and level plug (2) Oil drain plug Gear Oil Level Check The manual transmission, transfer gears, extension case and different ials (front and rear) are lubricated[...]

9-15 INSPECTION AND MAINTENANCE 66J21-03E Gear Oil Re placement To change the gear oil i n the manual trans- mission, transfer case, extension case or differential(s), use the fol lowing procedure: 1) Remove the oil filler plug (1). 2) Remove the drain plu g (2), drain th e oil and reinstall the drain plug. 3) Pour new gear oi l of the specified ty[...]

9-16 IN SPECTI ON AND MAI NTE NANCE 66J21-03E NOTE: Do not check the flui d level if you have just driven the vehicle fo r a long time at high speed, if you have driven in city traffi c in hot weather, or if the vehicle has be en pull- ing a trailer. Wait until the fluid cools down (about 30 minutes), or the fluid level indica- tion will not be cor[...]

9-17 INSPECTION AND MAINTENANCE 66J21-03E Engine Coolant 64J151 60A208 Selection of Coolant To maintain optimum performa nce and durability of your engine, use SUZUKI Genuine Coolant or equivalent. This type of coolant is best for your co oling system as it: • Helps maintain proper engine te mpera- ture. • Gives proper protection against freezi[...]

9-18 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Engine Coolant Replacement 66J151 1) When the engi ne is cool, remove the radiator cap by turning it slowly to the left until a “stop” is felt. Do not press down while turning the cap. Wait until any pressure is released, then press down on the cap and continue turn ing it to the left. 66J191 2) Rem[...]

9-19 INSPECTION AND MAINTENANCE 66J21-03E 64J191 3) Loosen the drain plug attached to the lower part of the radi ator and drain the engine coolant into a suitable container. 4) Reinstall the rese rvoir and fill it with engine coolant to the “FULL” line. 5) Tighten the drain plug o n the radiator, fill the radiator with engine coolant and instal[...]

9-20 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Air Cleaner 66J167 If the air cleaner is clog ged with dust, there will be greater intake resistance, resulting in decreased power output and increased fuel consumption. Check and clean periodically accord ing to the following proced ure: 1) Take off the air cleaner case cover. Remove the element from t[...]

9-21 INSPECTION AND MAINTENANCE 66J21-03E deposits with a wi re or pin and adjust the spark plug gap. To access the spark plugs: 1) Remove th e engine cover. 2) Disconnect the coupler (1) while push- ing the release lever. 3) Remov e the bolt. 4) Pull the ignition co il out. 80G093 Brakes Brake Fluid 64J154 Check the brake fluid level by looking at[...]

9-22 IN SPECTI ON AND MAI NTE NANCE 66J21-03E NOTE: With disc brakes, the fluid level can be expected to gradually fall as th e brake pads wear. Brake Pedal 65D345 With the engine run ning and the parking brake set, me asure the distance between the brake pedal and floor wall when the pedal is depressed with approximately 300 N (66 lbs, 30 kg) of f[...]

9-23 INSPECTION AND MAINTENANCE 66J21-03E 60G104 Parking Brake Le ver 60A226 Check the parking brake for proper adjust- ment by counting the number of clicks made by the ratchet teeth as you slowly pull up on the parking br ake lever to the point of full engagemen t. The parking brake lever should stop between the speci- fied ratchet teeth and the [...]

9-24 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Power Steering (if equipped ) 64J155 (1) UPPER (2) LOWER Check the steering box case, van e pump and hose connectio ns for leaks or damage. Power Steer ing Flui d Check the fluid level by looking at the res- ervoir in the engi ne compartment when the fluid is cold (about room temperature). Check that th[...]

9-25 INSPECTION AND MAINTENANCE 66J21-03E C. Tire Size The tire size code is a co mbination of letters and numbers used to define a particular tire’s width , height, aspect ratio, construction type, and service description. See the “Tire Size” expla- nation later in this section for more details. D. U.S. DOT Tire Id entification Number The De[...]

9-26 IN SPECTI ON AND MAI NTE NANCE 66J21-03E D. Construction Code This letter code is used to indicate the type of ply construction in the tire. The letter “R” means radial ply ti re con- struction, the letter “D” means dia go- nal or bias ply constru ction, and the letter “B” means belted-bias ply con- struction. E. Rim Diamete r This[...]

9-27 INSPECTION AND MAINTENANCE 66J21-03E 5) If the air pressure is too low, fill the tire with air at a service sta tion until it reaches the recomme nded pressure. 6) Make sure all tires have the same air pressure (unless the owne r’s manual indicates otherwise). Tire Inspection Inspect your vehicle’s tire s at least once a month by performin[...]

9-28 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Uniform Tire Quality Grading The U.S. National High way Traffic Safety Administration has deve loped a grading system for evaluating the performance of passenger car tires. The following informa- tion will help you u nderstand the grading system, which applies to vehicles sold in the U.S. Consult your S[...]

9-29 INSPECTION AND MAINTENANCE 66J21-03E Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels o f performance on the laboratory test wheel than the minimum required by law. Tire Rotation 4-tire rotation 65D459 To avoid uneven wea r of your tires and to prolong their life, rotate the ti res as illus- trated. Tires should be[...]

9-30 IN SPECTI ON AND MAI NTE NANCE 66J21-03E 64J179 (Half cover type) Remove the cent er bolt (1), then remove the outer cover (2) of the spare wheel half cove r. 64J180 2. Pull out the lock cover (B) fitted on the lock nut of the spare wh eel while inserting the key ful l into the key ho le of the lock cover (B). 3. Remove th e lock nut and wheel[...]

9-31 INSPECTION AND MAINTENANCE 66J21-03E 64J196 Snow Tires Your vehicle i s equipped w ith all-season tires which are designed for use in summer and most winter conditions. For improved traction in severe winter conditions, SUZUKI recommends mounting radial snow tires on all four wheels. Sn ow tires must be the same size as the standard tires. Als[...]

9-32 IN SPECTI ON AND MAI NTE NANCE 66J21-03E GLOSSARY OF T IRE TERMINOL- OGY Accessory Weight – the combined weight (in excess of tho se standard items which may be replaced) of automatic transmis- sion, power steering, power brakes, p ower windows, power seats, rad io, and heater, to the extent that th ese items are available as factory-inst al[...]

9-33 INSPECTION AND MAINTENANCE 66J21-03E Vehicle Loading Your vehicle was designed for specific load capacities. The load capacitie s of your vehicle are indicate d by the Gross Vehicle Weight Rating (GVWR), the Gross Axle Weight Rating (GAWR, front and rear), a nd the total load capacity, the seating capac- ity, and the cargo load capa city. The [...]

9-34 IN SPECTI ON AND MAI NTE NANCE 66J21-03E never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2) Determi ne the combined weight of the driver and passengers that will be riding in your vehicle. 3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4) The resulting figure equa ls the available amount of [...]

9-35 INSPECTION AND MAINTENANCE 66J21-03E Battery 60A269 Your vehicle is equipped with a battery that requires infrequent maintena nce. You will never have to add water. You should, how- ever, periodically check the battery, battery terminals and battery hold-down bracket for corrosion. Remove corrosion using a stiff brush and ammonia mixed with wa[...]

9-36 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Main Fuse Box 64J157 The main fuse, primary fuses and some of the individual fu ses are located in the engine compartment. If the mai n fuse blows, no electrical compon ent will func- tion. If a primary fuse blows, no electrical component in the corresponding load group will functi on. When replacing th[...]

9-37 INSPECTION AND MAINTENANCE 66J21-03E Fuse under the Dash Board Fuse box 64J192 64J158 65D045 The fuse box is located under the driver’s side of the dashboard. To remove a fuse, use the fuse puller provided in the fuse box. SP ARE SP ARE SP ARE SP ARE USE THE DESIGNA TED FUSES AND RELA YS ONL Y SP ARE SP ARE (A) (B) (C) (D) (E) (F) (G) (H) (I[...]

9-38 IN SPECTI ON AND MAI NTE NANCE 66J21-03E NOTE: Make sure that the fuse box cover always carries spare fuses. 60A243 81A283 Headlight Aiming Since special procedures are re quired, we recommend you take yo ur vehicle to your SUZUKI dealer for headlig ht alignment. WARNING Always be sure to repl ace a blown fuse with a fuse of the correct ampe r[...]

9-39 INSPECTION AND MAINTENANCE 66J21-03E Bulb Replacement NOTE: If it is difficult to replace headl ight bulbs or clearance light b ulbs due to under-ho od components trust this job to your dealer. Center Interior Light (if equipped) 64J159 Pull down the lens by using a plain screw driver covered w ith a soft cloth as shown. To install it, simply [...]

9-40 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Spot Light (if equipped) Pull down the lens by using a plain screw driver covered with a soft cloth as shown. Ceiling-mount type (if eq uipped) 66J010 Remove the bulb hold er by turning it coun- terclockwise. Pull out the bulb. Headlights Low beam (Halogen headlamp) 66J036 66J108 Open the engine hood. D[...]

9-41 INSPECTION AND MAINTENANCE 66J21-03E Front Fog Light 78F072 Open the engine hood. Disconnect the coupler while pu shing the lock release. Turn the bulb holder counterclockwise to remove it. Other General Lights Bulb holder 54G123 (1) Removal (2) Installation To remove a bulb hol der from a light hous- ing, turn the holder counterclockwise a nd[...]

9-42 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Parking/Turn si gnal light 64J163 Trust this replacement job to your deal er as the front grille and the headlight housing must be removed for this job. Rear combination light 64J164 License plate light 75F087 Door illu mination li ght 64J165 Luggage co mpartment light 64J166 EXAMPLE Wiper Blades: 3[...]

9-43 INSPECTION AND MAINTENANCE 66J21-03E High-mount stop lig ht (if equipped) 64J181 To remove a high-mounted stop light hous- ing the following proce dure: 1) Open the rear door, and remove the door trim (1) as shown in the illustra- tion. 64J182 2) Release the claws of the light housing by the flat head etc. through the service holes as shown in[...]

9-44 IN SPECTI ON AND MAI NTE NANCE 66J21-03E 64J184 4) Remov e the each bulb. 5) Replace the bulbs. To install a high -mounted stop ligh t housing in the re verse order of removal. Wiper Blades 54G129 If the wiper blades become brittl e or dam- aged, or make streaks when wiping , replace the wiper blades. To install new wiper b lades, follow the p[...]

9-45 INSPECTION AND MAINTENANCE 66J21-03E 52D102 2) Squeeze lock lever (1) towards wiper arm (2) and remove the wiper frame from the arm as shown. 60A260 3) Pull the locked end of the wiper blade firmly to unlock the blade and slide the blade out as shown. 52D124 (3) Retainer 4) If the new blade is provided without the two metal retainers, move the[...]

9-46 IN SPECTI ON AND MAI NTE NANCE 66J21-03E Installation 52D125 (4) Locked end 5) Install the new blade in th e reverse order of removal, with the lo cked end positioned towa rd the wiper arm. Make sure the blade is properly retained by all the hooks. Grasp the blade near the locked end and pull in the direction of the arrows to lock the end into[...]

9-47 INSPECTION AND MAINTENANCE 66J21-03E 54G135 (1) Retainer 4) If the new blade is provided without the two metal retainers, move them from the old blade to the new one. 5) Install the new blade in th e reverse order of removal. Make sure the blade is pro perly retained by all the hooks. 6) Reinstall wiper frame to arm in the reverse order of rem[...]

APPEARAN CE CARE 11 66J21-03E 60G412 APPEARANCE CARE Corrosion Prevention .................. .......................... ............. 11-1 Vehicle Cleaning ....... ......................... ......................... ........ 11-3[...]

11-1 APPEARANC E CARE 66J21-03E Corrosion Prevention It is important to take good care of your vehicle to protect it from corrosion. Listed below are instructi ons for how to maintain your vehicle to prevent corrosion. Please read and follow these instructions carefully. Important Information About Corro- sion Common causes of corrosion 1) Accumula[...]

11-2 APPEARAN CE CARE 66J21-03E Repair fi nish damage Carefully examine your vehicle for da mage to the painted surface s, especially if it is used off-road. Should you find any ch ips or scratches in the paint, touch them up immediately to prevent corrosion from starting. If the chips or scratches have gone through to the bare me tal, have a quali[...]

11-3 APPEARANC E CARE 66J21-03E Vehicle Cleaning 76G044S Cleaning Interior Vinyl upholstery Prepare a solution of soap or mild deter- gent mixed with warm water. Apply the solution to the vinyl with a sponge or soft cloth and let it soak for a few minutes to loosen dirt. Rub the su rface with a clean , damp cloth to remove dirt and the soap solutio[...]

11-4 APPEARAN CE CARE 66J21-03E Washing When washing the vehicle , follow the instructions below: 1) Flush the underside of body and wheel housings with pressurized wa ter to remove mud and debris. Use plenty of water. 2) Rinse t he body to loos en the dirt. Remove dirt and mud from the body exterior with running water. You may use a soft sponge or[...]

11-5 APPEARANC E CARE 66J21-03E MEMO[...]

GENERA L I NFORMA TI ON 12 66J21-03E 54G072 GENERAL INFORMATION Identification Numb ers ........ ......................... ...................... 12-1 Safety Certification Label ....... ............................ ................ 12-2 Emission Compliance Label (fo r U.S.A.) ...................... ..... 12-2 Warranties ......... ..................[...]

12-1 GENERAL INFORMA TI ON 66J21-03E Identification Numbers Vehicle Identification Number 60G152 64J197 The Vehicle Identific ation N umber (VIN) may be found in the two locations shown in the above illustrations. This number is used to register the veh icle. It is also used to assist your dealer when ordering parts or referring t o specia l servic[...]

12-2 GENERA L I NFORMA TI ON 66J21-03E Safety Certification Label 52D059 This label contains i mportant safety- related information abo ut your vehicle. The label is located on the driver’s door lock pil- lar. Emission Compliance Label (for U.S.A.) 60A412 The EPA emission compliance label is located under the hood. It pro vides much of the inform[...]

12-3 GENERAL INFORMA TI ON 66J21-03E On-Board Vehicle Computers and Event Data Recorders Your vehicle is equipped with on-board computer syst ems which monitor and control severa l aspects of vehicle per- formance, including the followin g : • Emission-related components and engine parameters such as engine speed and throttle position a r e moni-[...]

12-4 GENERA L I NFORMA TI ON 66J21-03E Reporting Safety Defects If you believe that your vehicle has a defect which could cause a crash or could cause injury o r death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Suzuki Motor Corp. If NHTSA receives similar complaints, i[...]

12-5 GENERAL INFORMA TI ON 66J21-03E MEMO[...]

13-1 FUSES AND PROT ECTED CI RCUI TS 66J21-03E 13 FUSES AND PROTECTED CIRCUITS 64J157 FUSES No. COLOR ( AMPS) PROTECTED CI RCUI T M AIN FUS E BOX (1) BLU E (1 5) CP RS R A/C com pre ssor fu se In e ngin e com partment (2) YEL LOW (20) O2 HT R O2 sensor heater f use (3) BLU E (15) THR M OT Throttle motor fuse (4) YELLO W (20) AT Automatic transmissi[...]

13-2 FUSES AND PROTECT ED CI RCUI TS 66J21-03E FUSES No. COLOR ( AMPS) PROTECTED CI RCUI T M AIN FUS E BOX (11) RED ( 50) ABS 1 ABS actuat or f use In e ngin e com partment (12) YELLOW (20 ) FI Main f use (13) – – Blank (14) RED (10) H/L L Hea d l ight hi gh beam fuse, left (15) RED (10) H/L R Head light hi gh beam f use, ri ght (16) RED ( 10) [...]

13-3 FUSES AND PROT ECTED CI RCUI TS 66J21-03E 64J158 FUSES I N FUSE BOX FUSES IN FU SE BOX (A) BLUE (15) STOP Stop l amp fuse (M) RED (7.5) ST SIG Star ter si gnal f use (B) – – Blank (N) YELLOW (20) RR BLO W B l ank (C) BLUE (15) AC C 3 Accessory socket fuse ( O) CLEAR (25) S/R S un r oof motor fu se (D) RED ( 10) CRUISE Cru i se c ont r ol f[...]

13-4 FUSES AND PROTECT ED CI RCUI TS 66J21-03E MEMO[...]

14-1 SPECI FI CATI ONS 66J21-03E 14 SPECIFICATIONS NOTE: Specifications are s ubject to change with- out notice. 4WD: 4-wheel drive 2WD: 2-wheel drive M/T: Manual transmission A/T: Automatic transmission ITEM: Dimensions UNIT: mm (in.) Overall length 4470 (176.0) Overall width 1810 (71.3) Overall height 4WD 1695 (66.7) 2WD 1683 (66.3) Wheelbase 264[...]

14-2 SPECIFI CATIONS 66J21-03E ITEM: Electrical Ignition timing 5° B.T.D.C. Standard spark plug DENSO SK20PR11 or NGK IFR6J11 (highly recommended) Battery 12V GP24 Fuses See “INSPECTION AND MAINTENANCE” and “FUSES AND PRO- TECTED CIRCUITS” sections ITEM: Lights WATTAGE BULB No. Headlight Low beam Hal ogen 12V 55 W H7 High beam 12V 60W HB3 [...]

14-3 SPECI FI CATI ONS 66J21-03E ITEM: Wheel Tire size, front and rear P225/70R16, P225/6 5R17 Tire pressure For the specified tire pressure, see the Tire Information Label located on the driver’s door lock pillar. ITEM: Steering Toe-in front 0 ± 2 mm (0 ± 0.08 in.) rear 6 ± 2 mm (0.24 ± 0.08 in.) Camber angle front 0° 00’ rear –1° 15?[...]

14-4 SPECIFI CATIONS 66J21-03E MEMO[...]

15-1 IN DEX 15 66J21-03E INDEX Symbols “AIR BAG” Light .............. ...................... ....................... ....... 4-8 “CRUISE” Indicator Light ............. ...................... ................4-9 “ESP OFF” Indicator Light ............ ...................... ........ 4-6 , 6-20 “ESP OFF” Switch ...................... .[...]

15-2 IN DEX 66J21-03E Cup Holder and Storage Bin ................. ....................... ....... 5-14 D Daily Inspection Checklist ............ ...................... ................6-2 Daytime Running Light ( D .R.L.) Indicator Li ght ..... .......... 4-10 Daytime Running Light (D.R.L.) System ..................... ....... 3-7 Door Locks ......[...]

15-3 IN DEX 66J21-03E If You Can Not Shift Automa tic Transmission Gearshift Lever Out of “P” (PARK) ....... ...................... ...................... .. 10-6 If Your Vehicle Gets Stuck ...... .......................... ..................7-4 Ignition Key Reminder ..................... ...................... ............. 2-1 Ignition Switch[...]

15-4 IN DEX 66J21-03E Outside Rearview Mirrors ............. ...................... ................2-17 Overhead Co nsole Box .............. ....................... ..................5-15 P Parking Brake Lever ................... ....................... .......... 5-1 , 9-23 Pedals .................... ...................... ......................[...]

15-5 IN DEX 66J21-03E Tire Inflatio n Pressure ................... ...................... ................9-26 Tire Inspection .................... ...................... ......................... .. 9-27 Tire Pressure Monito ring System (TPMS) ......... ................6-21 Tire Rotation ....................... ...................... .............[...]