Acer P1266 Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 126 Seiten
- 12.45 mb
Zur Seite of 126
Ähnliche Gebrauchsanleitungen
-
Projector
Acer PD525
59 Seiten 6.59 mb -
Projector
Acer PD117D series
47 Seiten 3.5 mb -
Projector
Acer P3250
141 Seiten 4.23 mb -
Projector
Acer XD1280
47 Seiten 10.66 mb -
Projector
Acer TravelMate 430
80 Seiten 4.52 mb -
Projector
Acer X1161A
54 Seiten 3.76 mb -
Projector
Acer PD523
3 Seiten 0.3 mb -
Projector
Acer P1206
63 Seiten 4.27 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Acer P1266 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Acer P1266, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Acer P1266 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Acer P1266. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Acer P1266 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Acer P1266
- Den Namen des Produzenten und das Produktionsjahr des Geräts Acer P1266
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Acer P1266
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Acer P1266 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Acer P1266 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Acer finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Acer P1266 zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Acer P1266, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Acer P1266 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
SER VICE MANUAL SI : TSE: Check: Approved: Date Revise V ersion Description 2008.07.29 V1.0 Initial Issue 2009.01. 23 V2.0 Add P1266i, P1 166P , P1266P P1 166 / P1266 / P1266i / P1 166P / P1266P Copyright January , 2009. All Rights Reserved P/N: 36.8BE04G001[...]
-
Seite 2
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential I P1 166 / P1266 / P1266i / P1 166P / P1266P Comparison List Comparison List P ARTS P1 166 P1266 P1 166P P1266P P1266I THERMAL SWITCH 43.8BB01G001 43.89J02G001 LAMP DRIVER 75.8BA01G001 75.8BJ10G001 LAMP MODULE SP .8BE01GC01 SP .8BA01GC01 LAMP COVER 51.8BA06G002 70.8BA24GR01 DMD 48.87K01G001 4[...]
-
Seite 3
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential II Preface This manual is applied to P1 166 / P1266 / P1266i / P1 166P / P1266P projection system. The manual gives you a brief description of basic technical information to help in service and maintain the product. Y our customers will appreciate the quick response time when you immediately [...]
-
Seite 4
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential III T able of Content Chapter 1 Introduction Highlight 1-1 Compatible Mode 1-4 Product Overview 1-6 Chapter 2 Disassembly Process Equipment Needed & Product Overview 2-1 Disassemble Lamp Cover Module and Lamp Module 2-2 Disassemble T op Cover Module 2-3 Disassemble Keypad Module 2-3 Disas[...]
-
Seite 5
Condential P1 166 / P1266 / P1266i / P1 166P / P1266P IV Disassemble Elevator Module 2-18 Rod Adjustment 2-19 Re-write Lamp Usage Hour 2-20 Assemble Elevator Module 2-21 Assemble Bottom Support Module 2-22 Assemble Speaker Module 2-23 Assemble L VPS Module 2-24 Assemble Interrupt Switch Module 2-25 Assemble Lamp Driver Module 2-25 Assemble DMD B[...]
-
Seite 6
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential V Chapter 4 Function T est & Alignment Procedure T est Equipment Needed 4-1 Service Mode 4-1 OSD Reset 4-1 T est Condition 4-2 T est Inspection Procedure 4-3 PC Mode 4-3 PC Calibration 4-7 Defectspecicationtable 4[...]
-
Seite 7
Condential P1 166 / P1266 / P1266i / P1 166P / P1266P VI EDID Key-In Procedure 6-4 Setup Procedure (HDMI) 6-6 Default Language Reset 6-9 Appendix A Exploded Image I Appendix B SerialNumberSystemDenition I PCBA[...]
-
Seite 8
P1 166 / P1266 / P1266i / P1 166P / P1266P 1-16 Chapter 1 Introduction 1-1 Highlight No 1 [...]
-
Seite 9
P1 166 / P1266 / P1266i / P1 166P / P1266P No ?[...]
-
Seite 10
P1 166 / P1266 / P1266i / P1 166P / P1266P No ?[...]
-
Seite 11
P1 166 / P1266 / P1266i / P1 166P / P1266P 1-2 Compatible Mode Computer Compatibility (Analog) [...]
-
Seite 12
P1 166 / P1266 / P1266i / P1 166P / P1266P ?[...]
-
Seite 13
P1 166 / P1266 / P1266i / P1 166P / P1266P 1-21 Product Overview Projector Outlook Front /Upper side 1 2 6 [...]
-
Seite 14
1-22 P1 166 / P1266 / P1266i / P1 166P / P1266P Rear side 1 2 ?[...]
-
Seite 15
P1 166 / P1266 / P1266i / P1 166P / P1266P 1-23 Control Panel 1 2 [...]
-
Seite 16
1-24 P1 166 / P1266 / P1266i / P1 166P / P1266P Remote Control Layout[...]
-
Seite 17
P1 166 / P1266 / P1266i / P1 166P / P1266P 1 2 ?[...]
-
Seite 18
1-26 P1 166 / P1266 / P1266i / P1 166P / P1266P [...]
-
Seite 19
P1 166 / P1266 / P1266i / P1 166P / P1266P Note: “*” Only for P1266i series, “#” Japan area is not supported.[...]
-
Seite 20
P1 166 / P1266 / P1266i / P1 166P / P1266P Connecting the Projector 1 6 2 ?[...]
-
Seite 21
P1 166 / P1266 / P1266i / P1 166P / P1266P 1 2 3 4 Note: For P1266i only Connecting the Projector for Wireless Function[...]
-
Seite 22
P1 166 / P1266 / P1266i / P1 166P / P1266P System Block Diagram[...]
-
Seite 23
P1 166 / P1266 / P1266i / P1 166P / P1266P 1-31 Bottom Cover Dimension[...]
-
Seite 24
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 2-1 Chapter 2 Disassembly& Assembly Process 2-1 Equipment Needed & Product Overview 1. Screw Bit (+) :107 2. Hex Sleeves 5mm 3. Hex Sleeves 8mm 4. T weezers 5. Long Nose Nipper , Angle Cutting Nipper 6. Sider Cutter Pliers 7. Projector * Before you start: This process is protective le[...]
-
Seite 25
Condential 2-2 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-2 Disassemble Lamp Cover Module and Lamp Module 1. Unscrew 2 screws (as red circle) to disassemble Lamp Cover Module. 2. Unscrew 2 screws (as yellow circle) to disassemble Lamp Module. Lamp Module[...]
-
Seite 26
Condential 2-3 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-3 Disassemble T op Cover Module 1. Unscrew 2 screws (as red circle) on Back Cover . 2. T urn the projector to backside. Unplug 1 connector (as red square) Note: - Pull up the T op Cover slowly to protect the connec tor from damage. 3. Disassembled T op Cover Module. 2-4 Disassemble Keyp[...]
-
Seite 27
Condential 2-4 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-5 Disassemble Zoom Ring 1. Unscrew 3 screws (as red circle). 2. Use a tweezer to remove 2 tenons (as yellow circle) and then take off Zoom Ring. 2-6 Disassemble T op Shielding 1. Unscrew 1 1 screws (as red circle). 2. Disassemble T op Shielding.[...]
-
Seite 28
Condential 2-5 P1 166 / P1266 / P1266i / P1 166P / P1266P 4. Press Bottom Support shielding as blue arrow directs, push Main Board Module as red arrow directs. Note: - When pulling up the Main Board, please handle it carefully to avoid damaging the connector that connects the DMD Board (as red square). 2-7 Disassemble Main Board Module 1. Unscre[...]
-
Seite 29
Condential 2-6 P1 166 / P1266 / P1266i / P1 166P / P1266P 5. Unplug 1 connector (as red square). Note: The connector is under Main Board. 6. Disassemble Main Board Module. 7. T ear Mylar off the Main Board. 2-8 Disassemble Wireless Module (only for P1266i) 1. T urn back the Main Board. 2. Unscrew 3 screws (as red circle) to disassemble Wireless [...]
-
Seite 30
Condential 2-7 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-10 Disassemble Front Cover Module 1. Press 5 tenons (as red circle) to disassemble Front Cover . 2-9 Disassemble Back Cover 1. Pull up Back Cover in the direction of the red arrow . A B B A[...]
-
Seite 31
Condential 2-8 P1 166 / P1266 / P1266i / P1 166P / P1266P 2. Press 2 tenons (as yellow circle) to disassemble IR sensor . 2-1 1 Disassemble Fan Module 1. Unscrew 4 screws (as red circle) to disassemble Fan Module. 2. Unplug 1 connector (as yellow square) to disassemble Fan. A A[...]
-
Seite 32
Condential 2-9 P1 166 / P1266 / P1266i / P1 166P / P1266P 3. Unscrew 4 screws (as yellow circle) to disassemble Fan&Bracket. 4. T ake off Lamp Blower Rubber (as blue square).[...]
-
Seite 33
Condential 2-10 P1 166 / P1266 / P1266i / P1 166P / P1266P 5. Unscrew 1 screw (as blue circle) to disassemble Thermal Switch. Thermal Switch 2-12 Disassemble Blower Module 1. Unscrew 3 screws (as red circle) to disassemble Blower Module. 2. Disassemble Blower and Blower Bracket.[...]
-
Seite 34
Condential 2-1 1 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-13 Disassemble Engine Module, Color Wheel Mo du le a nd R od M od ul e 1. Unscrew 4 screws (as red circle) to disassemble Engine Module. 2. Unscrew 2 screws (as yellow circle) to disassemble Color Wheel Module.[...]
-
Seite 35
Condential 2-12 P1 166 / P1266 / P1266i / P1 166P / P1266P 4. Unscrew 3 screws (as red circle). 5. Disassemble ROD Fix Plate and ROD Module. 6. Disassemble Focus Ring. Note: - Pay attention to the three tenons when disassembling focus ring. 3. Unscrew 1 screw (as green circle) to disassemble Photo Sensor from Color Wheel Module.[...]
-
Seite 36
Condential 2-13 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-14 Disassemble DMD Board and DMD Chip Module 1. Unscrew 2 hex screws (as red circle). 2. Disassemble DMD Board and DMD Chip Module. 3. Rotate the switch(as blue square) and then take off DMD Chip.[...]
-
Seite 37
Condential 2-14 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-15 Disassemble Lamp Driver Module 1. Unscrew 1 screw (as red circle) to disassemble Lamp Driver Module. Note: - Pull up lamp driver module from the bottom support shielding (as red square). 2. Pull up 1 connector (as red square) to disassemble Lamp Driver Module.[...]
-
Seite 38
Condential 2-15 P1 166 / P1266 / P1266i / P1 166P / P1266P 3. Unscrew 2 screws(as red circle). 4. Unscrew 1 screw(as yellow circle). 5. Unplug 3 connectors (as green square). 5. Disassemble Lamp Driver from Lamp Driver Support Shielding. 6. T ake off lamp cables. 2-16 Disassemble Interrupt Switch Module 1. Unplug 1 connector (as yellow square) f[...]
-
Seite 39
Condential 2-16 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-17 Disassemble L VPS Module 1. Unscrew 3 screws (as red circle) to take off AC Inlet Bracket. 2. Unscrew 1 ground screw (as yellow cirle). 3. Unscrew 3 screws (as blue circle) to disassemble L VPS Bracket & Mylar . A A[...]
-
Seite 40
Condential 2-17 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-18 Disassemble Speaker Module 1. Unscrew 1 screw (as red circle) to disassemble speaker module. 2. Press 2 tenons (as yellow circle) to disassemble Speaker and Speaker Holder . A[...]
-
Seite 41
Condential 2-18 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-19 Disassemble Bottom Support Module 1. Unscrew 1 screw (as red circle) to disassemble Bottom Support Module. 2-20 Disassemble Elevator Module 1. Disassemble the Ru bber (as red square). 2. Disa ssemble 1 Sprin g (as y ellow s quare).[...]
-
Seite 42
Condential 2-19 P1 166 / P1266 / P1266i / P1 166P / P1266P 3. Press 2 tenons (as green square) to disassemble Elevator Holder . 4. Unscrew 2 screws (as red circle), then press 1 tenon (as blue square) to disassemble Elevator Foot. 2-21 Rod Adjustment 1. Environment adjustment - The distance between the engine and the screen is 2.37M - This proce[...]
-
Seite 43
Condential 2-20 P1 166 / P1266 / P1266i / P1 166P / P1266P (“screw 1“ should be asjusted rst, and then “screw 2“. Adjust until the yellowish or bluish parts disappeared.) 3. Abnormal image inspection - It should not have any abnormal color at the rim of the image by estimating through the eyes. Note: - T o avoid over adjusting the rod[...]
-
Seite 44
Condential 2-21 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-23 Assemble Elevator Module 1. Fasten 1 tenon (as blue square) to assemble ElevatorRoot. Then screw 2 screws (as red circle). 2.Fasten 2 tenons (as green square) to assemble Elevator Holder . 3. Assemble 1 Spring (as yellow square). T est”. 4. Choose “Return to Service Menu”. 5. [...]
-
Seite 45
Condential 2-22 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-24 Assemble Bottom Support Module 1. Screw 1 screw (as red circle) to assemble Bottom Support Module. 4. Assemble the Rubber (as red square).[...]
-
Seite 46
Condential 2-23 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-25 Assemble Speaker Module 1. Fasten 2 tenons (as yellow circle) to assemble Speaker and Speaker Holder . 2. Screw 1 screw (as red circle) to assemble Speaker Module. .[...]
-
Seite 47
Condential 2-24 P1 166 / P1266 / P1266i / P1 166P / P1266P A 2-26 Assemble L VPS Module 1. Screw 3 screws (as blue circle) to assemble L VPS Bracket & Mylar . 2. Screw 1 ground screw (as yellow cirle). 3. Screw 3 screws (as red circle) to x AC Inlet Bracket. A A[...]
-
Seite 48
Condential 2-25 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-27 Assemble Interrupt Switch Module 1. Fasten 2 tenons (as yellow circle) to assemble Interrupt Switch Module. 2. Plug 1 connector (as yellow square) into L VPS. A A B B 2-28 Assemble Lamp Driver Module 1. Aassemble Lamp Driver with Lamp Driver Support Shielding. 2. Connect Lamp Cables[...]
-
Seite 49
Condential 2-26 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-29 Assemble DMD Board and DMD Chip Module 1. Rotate the switch (as blue square) to assemble DMD Chip. 5. Plug 1 connector (as red square) to assemble Lamp Driver Module. 6. Screw 1 screw (as red circle) to assemble Lamp Driver Module. Note: - Put lamp driver module below the bottom sup[...]
-
Seite 50
Condential 2-27 P1 166 / P1266 / P1266i / P1 166P / P1266P 2. Assemble DMD Board and DMD Chip Module. 3. Screw 2 hex screws (as red circle). 2-30 AssembleEngine Module, Color Wheel Mod ule a nd Ro d M odu le 1. Assemble Focus Ring. Note: - Pay attention to the three tenons when disassembling focus ring. 2. Screw 3 screws (as red circle)to assemb[...]
-
Seite 51
Condential 2-28 P1 166 / P1266 / P1266i / P1 166P / P1266P 4. Screw 2 screws (as yellow circle) to Screw 2 screws (as yellow circle) to assemble Color Wheel Module. 5. Screw 4 screws (as red circle) to assemble Engine Module.[...]
-
Seite 52
Condential 2-29 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-31 Assemble Blower Module 1. Assemble Blower and Blower Bracket. 2. Screw 3 screws (as red circle) to assemble Blower Module. 2-32 Assemble Fan Module 1. Screw 1 screw (as blue circle) to assemble Thermal Switch.[...]
-
Seite 53
Condential 2-30 P1 166 / P1266 / P1266i / P1 166P / P1266P 3. Screw 4 screws (as yellow circle) to assemble Fan&Bracket. 2. Assemble Lamp Blower Rubber (as blue square).[...]
-
Seite 54
Condential 2-31 P1 166 / P1266 / P1266i / P1 166P / P1266P A A 4. Plug 1 connector (as yellow square) to assemble Fan. 5. Screw 4 screws (as red circle) to assemble Fan Module. 2-33 Assemble Front Cover Module 1. Fasten 2 tenons (as yellow circle) to assemble IR sensor .[...]
-
Seite 55
Condential 2-32 P1 166 / P1266 / P1266i / P1 166P / P1266P A B B A 2-34 Assemble Back Cover 1. Assemble Back Cover in the direction of the red arrow . 2. Fasten 5 tenons (as red circle) to assemble Front Cover .[...]
-
Seite 56
Condential 2-33 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-36 Assemble Main Board Module 2. Assemble mylar on the Main Board. 3. Connect 1 connector (as red square). Note: The connector is under Main Board. 2-35 Assemble Wireless Mod ule ( onl y f or P1 266i ) 1. Screw 3 screws (as red circle) to disassemble Wireless Module. 2. T urn back the [...]
-
Seite 57
Condential 2-34 P1 166 / P1266 / P1266i / P1 166P / P1266P 5. Plug 7 connecors (as yellow square). 6. Screw 3 screws (as blue circle). 7. Screw 4 hex screws (as red circle). 4. Press bottom support shielding as blue arrow directs, push Main Board Module as red arrow directs. Note: The connector on the Main Board should be connected to the DMD Bo[...]
-
Seite 58
Condential 2-35 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-37 Assemble T op Shielding 1. Assemble T op Shielding. 2. Screw 1 1 screws (as red circle) on T op Shielding. 2-38 Assemble Zoom Ring 1. Fasten 2 tenons (as yellow circle) to assemble Zoom Ring. 2. Screw 3 screws (as red circle).[...]
-
Seite 59
Condential 2-36 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-39 Assemble Keypad Module 1. Assemble Keypad Board,Keypad Board Bracket and Mylar . 2. Plug 1 FPC Cable (as yellow square). 3. Screw 4 screws (as red circle). 2-40 Assemble T op Cover Module 1. Assemble the T op Cover Module. 2. Unplug 1 connector (as red square). 3. T urn the projecto[...]
-
Seite 60
Condential 2-37 P1 166 / P1266 / P1266i / P1 166P / P1266P 2-41 Assemble Lamp Cover Module and Lamp Module 1. Screw 2 screws (as yellow circle) to assemble Lamp Module. 2. Screw 2 screws (as red circle) to assemble Lamp Cover Module.[...]
-
Seite 61
3-1 Condential P1 166 / P1266 / P1266i / P1 166P / P1266P Chapter 3 T roubleshooting 3-1 LED Lighting Message NO. Message Lamp LED T emp LED Power LED Red Red Red Blue 1 Standby (power cord plugged in) -- -- V -- 3 Power button ON -- -- -- V 4 Lamp retry -- -- -- Quick ashing 5 T urning off (cooling state) -- -- Quick ashing -- 6 T urning [...]
-
Seite 62
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 3-2 3-2 Beep Sound Power on (as soon as power button pressed) So (0.3s) Power on (lamp lighting failed) 2 x {So(0.1s) – Off(0.1s)} per lighting failure 12s interval for each trial lighting. Max 4 times of trial Power on (lens cap was not opened, for the model with sliding lens cover only) 2[...]
-
Seite 63
3-3 Condential P1 166 / P1266 / P1266i / P1 166P / P1266P 3-3 Main Procedure No Symptom Procedure 1 No Power - Ensure the Power Cord and AC Power Outlet are securely connected - Check Lamp Cover and Interrupt Switch - Ensure all connectors are securely connected and aren’t broken - Check Lamp driver - Check L VPS - Check Main Board 2 Auto Shut[...]
-
Seite 64
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 3-4 No Symptom Procedure 5 Mechanical Noise - Check Color Wheel - Check Fan Module 6 Line Bar / Line Defect - Sometimes it’s because of the DMD Chip and the DMD Board did not assemble properly - Check DMD Board - Check DMD Chip - Check Main Board 7 Image Flicker - Do “Reset” of the OSD [...]
-
Seite 65
3-5 Condential P1 166 / P1266 / P1266i / P1 166P / P1266P No Symptom Procedure 12 Remote Control / Control Panel Failed - Remote Control a. Check Battery b. Check Remote Control c. IR Receiver - Control Panel a. Check FPC b. Check Keypad c. Check Main Board 13 Function Abnormal - Do “Reset” of the OSD Menu - Check Main Board - Check DMD Boar[...]
-
Seite 66
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 3-6 No Symptom Procedure 15 Forgetting Pass - word (adminstra - tor Password) - An unique Universal Password which is printed on the Security Card. This unique password is a back door of Administrator Password which will be accepted by projec- tor anytime no matter what the Administrator Pass[...]
-
Seite 67
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 4-1 Chapter 4 Function T est & Alignment Procedure 4-1 T est Equipment Needed - IBM PC with XGA resolution and Wireless Network Card - DVD player with Multi-system (NTSC/P AL/SECAM), equipped “Component”, “S-Video” , “Composite” and "HDMI". - HDTV Source (480P , 720P[...]
-
Seite 68
Condential 4-2 P1 166 / P1266 / P1266i / P1 166P / P1266P 4-4 T est Condition - Circumstance brightness: Dark room less than 5.0 lux. - Inspection distance: 1.8 M~2.5 M functional inspection. - Screen size: 60 inches diagonal - After repairing each P1 166 / P1266 / P1266i / P1 166P / P1266P , the unit should be run-in (refer to the table below) [...]
-
Seite 69
Condential 4-3 P1 166 / P1266 / P1266i / P1 166P / P1266P 4-5 T est Inspection Procedure Charge parts Update Main Board Firmware Color Wheel Lamp Module EDID Lamp Driver V ersion Update v v v Color Wheel Index v v Reset lamp hour v OSD Reset v v EDID v Re-write Lamp Hour Usage v Default Language Reset v v v W aveform Download v 4-6 PC MODE Note:[...]
-
Seite 70
Condential 4-4 P1 166 / P1266 / P1266i / P1 166P / P1266P total pixel number of pixel clock in one line period. (2) Select "T racking" function and use right or left arrow key to adjust the value to minimize video icker . - Adjust Resync or Frequency/T racking/H. Posi - tion/V . Position to the inner screen. Inspection item - Elimin[...]
-
Seite 71
Condential 4-5 P1 166 / P1266 / P1266i / P1 166P / P1266P 3. Blemish (Dark) Procedure - T est equipment: video generator . - T est signal: analog 1024 x 768@60Hz. 1024 x 768@60Hz. . - T est Pattern: blue 60 Inspection item - Dark blemish check. (dirty) Criteria - It is acceptable to have four dark blemish at dark blemish at most on blue 60 patte[...]
-
Seite 72
Condential 4-6 P1 166 / P1266 / P1266i / P1 166P / P1266P 6. Focus test Procedure - T est equipment: video generator . - T est signal: analog 1024 x 768@60Hz 1024 x 768@60Hz - T est Pattern: full screen or MEME Sony Inspection item - Focus check Criteria - From screen 1.95 M via visual to check the focus, look at the entire screen, focus shall b[...]
-
Seite 73
Condential 4-7 P1 166 / P1266 / P1266i / P1 166P / P1266P (the unidentied color levels on both left and right sides should not over 8 color levels.) - Gray level should not have abnormal color or heavy lines. - The PC mode functionally sure be workable include support format with frequency and auto detected functional will be workable 4-7 PC [...]
-
Seite 74
Condential 4-8 P1 166 / P1266 / P1266i / P1 166P / P1266P 4-8 Defect specication table Order Symptom Pattern Criteria 1 Bright pixel ( dots) Black pattern ( IRE=O) A+B=0 2 Dark pixel(dots) White pattern A+B=6 3 Unstable pixel (dots) Any pattern A+B=1 4 Adjacent dark pixel (dots) Any pattern A+B=0 5 Dark blemish (Dirty) Blue 60 pattern A+B=4 ([...]
-
Seite 75
Condential 4-9 P1 166 / P1266 / P1266i / P1 166P / P1266P 2. S-Video Procedure - T est equipment: DVD player - Test signal: S-Video Inspection item - Video performance test Inspection Distance - 1.8 M ~2.5 M Criteria - Check any abnormal color , line distortion or any noise on the screen. - Check the sound from speakers. 3. HDTV/ Component Proce[...]
-
Seite 76
Condential 4-10 P1 166 / P1266 / P1266i / P1 166P / P1266P 4-10 Optical Performance Measure Inspection Condition - Environment luminance: 5 Lux - Product must be warmed up for 3 minutes - Distances from the screen: 1.95 M - Screen Size: 60 inches diagonal 1. T est equipment Procedure - Get into service mode: Press "Power→Left→ Left→Me[...]
-
Seite 77
Condential 4-1 1 P1 166 / P1266 / P1266i / P1 166P / P1266P Note: P5=center of white image B5=center of black image. Criteria 1400: 1 (for P1 166 / P1266) 1400: 1 (for P1 166 / P1266) 1400: 1 (for P1 166 / P1266) (for P1 166 / P1266) 1900: 1 (for P1266i / P1 166P / P1266P) 4. Uniformity Procedure - Full white pattern - Use CL100 to measu[...]
-
Seite 78
Condential 4-12 P1 166 / P1266 / P1266i / P1 166P / P1266P Acoustic - High pitch sound from cooling fan and color wheel is unacceptable. 2. Check points for exterior and print pattern Check item Check point T ext & Pattern Missing letters & pattern or blurry prints are unacceptable Exterior Dirt, scrape, water ripples and uneven color ar[...]
-
Seite 79
Condential 4-13 P1 166 / P1266 / P1266i / P1 166P / P1266P 4-12 LAN and Wireless Function T est (only for P1266i) 1. Write down Projector ID and Server IP - Plug in power cord to the projector and connect PC with projector by RJ45 cable. - T urn on the projector . - Write down the Projector ID: "8948" and Server IP address: 192.168.100[...]
-
Seite 80
Condential 4-14 P1 166 / P1266 / P1266i / P1 166P / P1266P - Modify the IP address to 192.168.100.12, and modify Subnet mask to 255.255.255.0. Note: The HOST ID (192.168.100. XXX ) of PC IP address must be different from the Server IP address written down in step 1. - Click "OK". - Click "Close" to quit the setting screen. 3.[...]
-
Seite 81
Condential 4-15 P1 166 / P1266 / P1266i / P1 166P / P1266P 4. Acer Projector Gateway Installation - Double click "Acer .exe" le. - Click "Next". - "Empowering T echnology - Acer eProjection Management" and "Login - AcerProjectorGateway" will appear on the sreen, the Installation complete. 5. LAN Functio[...]
-
Seite 82
Condential 4-16 P1 166 / P1266 / P1266i / P1 166P / P1266P 5. Wireless Network Function T est - Unplug LAN Cable from Projector and PC. - Right click "Wireless Network Connection", then choose "View Available Wireless Networks". - "Wireless Network Connection" picture will appear on the screen, then double click &qu[...]
-
Seite 83
Condential 5-1 P1 166 / P1266 / P1266i / P1 166P / P1266P Chapter 5 Firmware Upgrade 5-1 Equipment Needed Software : (DDP 2230- USB) - DLP Composer - Firmware - 8M Flash (8M ash has to put in PC and set right path in 5-4 step 5) Note: Befrore rmware upgrade, extract 8M ash le to DLP composer iles .( according to 5-4 step 1) Hardwa[...]
-
Seite 84
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-2 5-2 DLP Composer Lite Setup Procedure 1. Choose "DLP Composer Lite V7.1 Setup" Program. 2. Click "Next". 3. Read License Agreement. - Choose I accept and agree to be bound by all the terms and conditions of this License Agreement. 4. Click "Next". 5. Click &q[...]
-
Seite 85
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-3 6. Click Next. 7. Click Next. 8. Writing system registry values. 9. Click Finish.[...]
-
Seite 86
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-4 5-3 USB Driver Upgrade Procedure 1. set up - Plug in Power cord to projector . - Link PC USB port and projector USB port by USB Cable. 2. Execute Program (1) Found new hardware wiszard will be appearred on the screen. (2) Select Install the software automatically (Recommended). (3) Then c[...]
-
Seite 87
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-5 5-4 Firmware Upgrade Procedure 1. Unzip "8M ash.rar" to "DLP Composer Lite v7.1 Setp" les. 2. Set-up - Hold on "Power" button and plug in power cord while holding on "Power". - Once the Lamp LED and the T emp LED light on Red, plug in USB cabl[...]
-
Seite 88
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-6 6. Select EditpreferencesCommunications - Choose USB". - Click OK". 7. Choose Flash Loader . - Select the item "Skip Boot Loader Area" (select 32KB) - Click "Browse" to search the rmware le. - Select the FW le (*.img). - Click "Open".[...]
-
Seite 89
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-7 8. Click "Reset Bus" to erase the ash memory . 9. If the rmware i s ready , click start downlo ad to process the rmware upgrade. - Click "Y es" to erase the ash memory . 10. When rmware upgrade process is nished, the unit return to stand-by status. T[...]
-
Seite 90
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 5-8 T emp LED Lamp LED Power LED Up Button 5-5 W aveform Download 1.Hold on the “up” button, then plug power cord in, the Power LED light on red,after about 5 seconds, it turns to blue and T emp LED will ash for 4 seconds. After that, the T emp LED and Lamp LED light on red, and Power [...]
-
Seite 91
Condential 6-1 P1 166 / P1266 / P1266i / P1 166P / P1266P Chapter 6 EDID Upgrade 6-1 EDID Introduction Extended Display Identication Data is a VESA standard data format that contains basic information about a display device and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, [...]
-
Seite 92
Condential 6-2 P1 166 / P1266 / P1266i / P1 166P / P1266P 6-2 Equipment Needed Software - EDID Program (Generic V0.51) - EDID File Hardware - Projector - Generic Fixture (80.00001.001) for EDID Key-in (Fixture: JP3 must be closed) - Power cord for Projector (42.53506G002) - RS-232 9 Pin Cable (pin to pin, F-M) (42.83C07G001) - Monitor - PC - VGA[...]
-
Seite 93
Condential 6-3 P1 166 / P1266 / P1266i / P1 166P / P1266P 6-3 Setup Procedure (VGA) 1. Connect all ports (1) Connect P1 of Fixture with COM Port of PC/Laptop by RS232 Cable. (2) Connect P2 of Fixture with VGA port of Projector by VGA Cable. (3) Plug Power Adapter to Power CNN. (4) Plug Power Cord to projector . Note: Y ou must conrm that the [...]
-
Seite 94
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 6-4 6-4 EDID Key-In Procedure 1. Execute EDID Program (1) Click on "EDID" to execute EDID program. 2. Process (1) Check the COM port is COM 2" (Select the COM port which you are using). (2) Click the Model button. (3) Choose the source le "ACER_P1266 EDID-B.ini (*.ini)&[...]
-
Seite 95
Condential 6-5 P1 166 / P1266 / P1266i / P1 166P / P1266P 5 6 7 5. Finish (1) "OK" will be shown on the screen. 6. Read EDID information (1) In the Read item,select "Analog" and "T rans". (2) Please press "Read" button. 7. Read EDID information (1) EDID Informations will show the result. (1) (2)[...]
-
Seite 96
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 6-6 6-5 Setup Procedure (HDMI) 1. Connect all ports (1) Connect P1 of Fixture with COM Port of PC/Laptop by RS232 Cable. (2) Connect P2 of Fixture with P3 by DVI Cable. (3) Plug P4 to HDMI Port of the Projector . (4) Plug Power Adapter to Power CNN. ( 5) Plug Power Cord to P12660 unit. Note: [...]
-
Seite 97
Condential 6-7 P1 166 / P1266 / P1266i / P1 166P / P1266P 2. Process (1) Check the COM port is "COM 2" (Select the COM port which you are using). (2) Click the "Model" button. (3) Choose the source le "ACER_P1266 EDID-B.ini" and then open it. 3. Process (1) Key in the serial number into the barcode blank space. ([...]
-
Seite 98
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential 6-8 5. Finish (1) "OK" will be shown on the screen. 6. Read EDID information (1) In the Read item, select "Digital" and "T rans". (2) Please press "Read" button. 7. Read EDID information (1) EDID Informations will show the result. 5 7 6 (1) (2)[...]
-
Seite 99
Condential 6-9 P1 166 / P1266 / P1266i / P1 166P / P1266P 6-6 Default Language Reset (1) Hold on “Down” button then plug in the Power Cord. Note: At this moment, Power LED turns blue while T emp LED ashes in red for about 4s, then release the “Down” button . (2) After that, please check the LED status and judge the actions as the foll[...]
-
Seite 100
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential I Appendix A ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 70.8BA18GR01 ASSY F AN MODULE P1266(SERVICE) V 1 61.8BA04G002 F AN SHIELDING P1 166 2 85.0A123G050 SCREW P/F MECH M3*5 Ni 3 52.8BA05G001 LAMP BLOWER RUBBER P1266 4 49.8BA01G001 SUNON 80*25MM AXIAL F AN (125C 5 43.8BB01G001 THERMAL SWITCH[...]
-
Seite 101
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential II ITEM P ART NO. DESCRIPTION SUPPL Y P ARTS 70.8BA20GR01 ASSY FRONT COVER MODULE P1266(SERVICE) V 1 51.8BA04G002 FRONT COVER P1 166 2 51.87H09G001 FRONT IR LENS XD1 171D 3 61.8BA12G001 ACER LOGO P1266 4 80.87M05G001 PCBA IR SENSOR BD FOR EP761 V 5 61.00079G001 GROUNDING CABLE CLAMP FN-008 6 [...]
-
Seite 102
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential III ASSY T OP COVER MODULE[...]
-
Seite 103
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential IV ITEM P ART NO. DESCRIPTION SUPPL Y P ARTS 70.8BA21GR01 ASSY TOP COVER MODULE P1266(SERVICE) V 1 51.8BA16G002 KEYP AD MODULE P1 166 2 51.8BA1 1G002 ZOOM RING HOLDER P1 166 3 51.8BA12G002 ZOOM RING P1 166 4 85.Y A123G040 SCREW(T APPING FLA T HEAD NI M3* 5 42.00303G01 1 FFC KEYP AD T O M/B 24[...]
-
Seite 104
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential V ITEM P AR T NO. DESCRIPTION SUPPL Y P ARTS 70.8BA15GR01 ASSY COLOR WHEEL MODULE P1266(SERVICE) V 1 23.8BA19G001 COLOR WHEEL YO 6SCW R85Y37G90C 2 80.87Y04G001 PCBA PHOTO SENSOR BOARD FOR PD7280 V 3 85.1A126G040 SCREW P AN MECH M2.6*4 Ni 4 52.83615G001 COLOR WHEEL DISC RUBBER, EzPro755 5 61.8[...]
-
Seite 105
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential VI ASSY BOTT OM COVER MODULE PP1270H5350[...]
-
Seite 106
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential VII ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 70.8BA14GR01 ASSY BOTT OM COVER MODULE P1266(RMA) V 1 75.8BA03G002 ASSY BOTT OM COVER FOR K-LOCK P1 166 2 52.8BA03G002 ELEVTOR FOOT P1 166 3 51.8BA10G002 ELEV A TOR FOOT PLASTIC P1 166 V 4 61.86814G001 ELEV A T OR EXTEND SPRING PD120 5 61.85913G0[...]
-
Seite 107
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential VIII ASSY MAIN BOARD MODULE[...]
-
Seite 108
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential IX ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 70.8BE06GR01 ASSY MAIN BOARD MODULE P1 166 (SERVICE) V 70.8BA17GR01 ASSY MAIN BOARD MODULE P1266 (SERVICE) V 1 80.8BA01G001 PCBA MAIN BD FOR P1266 1 80.8BE01G001 PCBA MAIN BD FOR P1 166 2 51.8BA19G002 MB T OP MYLAR P1 166 3 41.85E06G002 GASKET W13[...]
-
Seite 109
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential X ASSY LAMP MODULE[...]
-
Seite 110
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XI ITEM P AR T NO. DESCRIPTION SUPPL Y P ARTS SP .8BE01GC01 LAMP MODULE FOR PROJECT OR P1 166/P1266 V 1 23.8BA15G001 LAMP E20.8 180W OSRAM 2 61.8BA05G002 LAMP TOP HOLDER P1 166 3 51.8BA14G002 LAMP BOTT OM BASE P1270 4 61.8BA01G001 LAMP HOLDER E20.8 P1266 5 61.8BA06G001 LAMP CLAMP T OP P1266 6[...]
-
Seite 111
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XII ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 70.8BE07GR01 ASSY IO COVER MODULE P1 166 (SERVICE) V 70.8BA19GR01 ASSY IO COVER MODULE P1266 (SERVICE) V 1 51.8BA05G002 DESCRIPTION 2 35.8BA01G002 IO COVER P1 166 3 35.8BA02G001 MODEL NAME LABEL P1266 3 35.8BE01G001 MODEL NAME LABEL P1 166 ASSY I[...]
-
Seite 112
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XIII ASSY ENGINE BOTT OM MODULE ITEM P AR T NO. DESCRIPTION SUPPL Y P AR TS 1 51.88N01G001 ENGINE BOTT OM COVER PC945 X15 2 52.88N05G001 RELA Y RUBBER 3 52.85808G001 PORON LENS BLACK XB31 4 23.88N02G001 YO MIRROR1 FOR X15 5 61.88N1 1G001 MIRROR SPRING SUS301 X15 6 51.88N29G001 T APE 3M J1350 [...]
-
Seite 113
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XIV ASSY LAMP DRIVER MODULE[...]
-
Seite 114
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XV ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 1 42.81G01G001 CABLE W .A. 2P #20 160mm LAPS T V 2 42.00422G001 W .A 5P 150mm LAMP DRIVER TO M V 3 85.3A122G040 SCREW CAP MECH M2*4 Ni 4 42.0043EG002 W .A. 2P#20 FEMALE 6KV 85MM LAM 5 51.8BA08G002 LAMP DRIVER HOLDER P1266 6 75.8BA01G001 ASSY OSRAM[...]
-
Seite 115
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XVI ASSY BOTT OM HOUSING MODULE[...]
-
Seite 116
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XVII ITEM P AR T NO. DESCRIPTION SUPPL Y P ARTS 1 70.8BA10G001 ASSY BOTTOM COVER MODULE P1266 2 70.8BA02G001 ASSY LAMP DRIVER MODULE P1266 3 70.8BE01G001 ASSY ENGINE MODULE P1 166 3 70.8BA03G001 ASSY ENGINE MODULE P1266 4 70.8BE02G001 ASSY MAIN BOARD MODULE P1 166 4 70.8BA04G001 ASSY MAIN BOA[...]
-
Seite 117
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XVIII 28 85.1A326G060 SCREW P AN HEAD MECH M2.6*6 BLACK 29 85.1A323G080 SCREW P AN MECH M3*8 BLACK ‘GRE 30 41.83C01G001 EMI GASKET W13*H15*L40 31 41.89B02G001 EMI T APE W*20/L*70 32 41.85Y04G002 EMI GASKET (S-VIDEO & S-VIDEO) 33 51.8BA22G001 BOTT OM LEFT INNER MYLAR P1266 34 51.8BA23G00[...]
-
Seite 118
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XIX ASSY ENGINE MODULE[...]
-
Seite 119
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XX ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 1 51.8BA07G002 FOCUS RING P1266 V 70.8BA16GR01 ASSY ENGINE MODULE P1266(SERVICE) V 2 61.88N39G001 STOP MASK MG X15 3 81.1A126G060 SCREW P AN MECH M2.6*6 Ni 4 23.8BA01G001 PROJECTION LENS YM25 5 52.88N02G002 PROJECTION LENS RUBBER NEW X15 6 70.8BA0[...]
-
Seite 120
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XXI 22 48.87K01G001 DMD T ype-X 800x600 PIXEL 0.55’ XGA (FOR P1 166) V 23 61.88N15G001 DMD MASK SUS301,X15 24 52.88N04G002 DMD RUBBER NEW 1.3T X15 25 61.88N01G003 ENGINE BASE MG X15 26 52.88N01G001 OFF RA Y RUBBER,X15 27 61.88N05G001 OFF RA Y PLA TE AL5052,X15 28 87.FL030G008 W ASHER FLA T [...]
-
Seite 121
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XXII D.C.P1 166/P1266[...]
-
Seite 122
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential XXIII ITEM P ART NO. DESCRIPTION SUPPL Y P AR TS 1 70.8BA01G001 ASSY BOTTOM HOUSING MODULE P1266 1 70.8BE04G001 ASSY BOTTOM HOUSING MODULE P1 166 2 70.8BA06G001 ASSY FRONT COVER MODULE P1266 SP .8BE01GC01 LAMP MODULE FOR PROJECT OR P1 166/P1266 V 3 70.8BE05G001 ASSY LAMP MODULE P1266 4 70.8BA[...]
-
Seite 123
Condential P1 166 / P1266 / P1266i / P1 166P / P1266P I Appendix B I. Serial Number System Denition Serial Number Format for Projector (take P1 166 for example) EYJ6901001 820 00000 59 0 1 1 2 3 4 5 6 1 : EYJ6901001 = Part Number 2 : 820 = Date Code (ex:200 8 = 8, the twentieth week of the year = 20) 3 : 00000 = Serial Numbers 4 : 59 = Manufa[...]
-
Seite 124
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential II II. PCBA Code Denition PCBA Code for Projector A B XXX XXXXXXXXX CC XXX EEEE 1 : ID 2 : V endor Code 3 : Firmware V ersion 4 : P/N 5 : MB version 6 : Date Code 7 : S/N 1 2 3 7 6 5 4[...]
-
Seite 125
Condential P1 166 / P1266 / P1266i / P1 166P / P1266P I Appendix C RS232 function command summary table General command type (Projector “receives” commands) No Code (character) Function feature 1 OKOKOKOKOK Power On 2 * 0 IR 001 Power On 3 * 0 IR 002 Power Off 4 * 0 IR 004 Keystone 5 * 0 IR 006 Mute 6 * 0 IR 007 Freeze 7 * 0 IR 008 Menu 8 * [...]
-
Seite 126
P1 166 / P1266 / P1266i / P1 166P / P1266P Condential II No Code (character) Function feature 33 * 0 IR 034 Video: Sharpness adjustment 34 * 0 IR 035 Query Model name 35 * 0 IR 036 Query Native display resolution 36 * 0 IR 037 Query company name 37 * 0 IR 040 Aspect ratioL.Box (Not supply) 38 * 0 IR 041 Aspect ratio 1:1 (Not supply) 39 * 0 IR 04[...]