Acer TravelMate 330 Series Bedienungsanleitung

T ravelMate 330 Series Notebook Computer User’s G uide 330.book Page 1 Friday, March 5, 1999 11:08 AM[...]

Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to t[...]

iii T able of Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Connecting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv Getting Help O[...]

iv Securing your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Security Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Setting a Password . . . . . . . . . . . .[...]

v Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 External Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

vi Notebook Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Information Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Boot Sequence . . . . . . . . . . . . .[...]

vii Notices FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte rference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if [...]

Notices viii Use Conditions This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian Users This Class B digital appa[...]

ix CTR 21 This equipment has been approved [Council Decision 98/482/EC - “CTR 21”] for pan-European single terminal connection to the Public Switched T elephone Network (PSTN). How ever, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successfu[...]

Notices x 9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 10. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous[...]

xi NSTL’s YMARK2000 certification test. These tests certify that this model will successfully make the year 2000 transition. For more details, check the Acer Year 2000 Resource Center at http://www. acer.com.tw/service/y2k/ Laser Compliance Statement The CD-ROM drive in this computer is a laser product. The CD- ROM drive’s classification label [...]

Notices xii Lithium Batter y Statement CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufact urer. Discard used batteries according to the manufacturer’s instructions. ADV ARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske m[...]

xiii Pr eface This manual describes features of the T ravelMate 330 series notebook computers. This series of ultra-slim computers incorporate such features as CardBus, 16-bit PCI stereo 3D audio, Fast Infrared, internal 56K modem, inte rnal pointing device with scroll function, Universal Serial Bus, and Accelerated Graphics Port. This manual shoul[...]

Preface xiv Connecting the Computer Connecting the computer is as easy as 1-2-3. 1. Gently insert the battery into the battery bay by following the guide symbols on both the battery and the bottom of the computer; then slide the battery in until it clicks into place. The battery release latch locks. Note: When using a batte ry pack for the first ti[...]

xv then release it to turn on the powe r. The POST (Power On Self-T est) routine executes and Windows begins loading. Note: To turn off the powe r, press the power switch for more than four seconds. If you are using Windows, we recommend that you use the Shut Down command to turn off the comput er. If you turn off the computer and want to turn it o[...]

Preface xvi Getting Help Online This user’s guide provides clear and concise information about the computer , so read it thoroughly. To provide you with help when traveling, the computer also has a comprehensive online help. Accessing Online Help T o access the online documentation, locate and double-click on the T ravelMate Online icon on the Wi[...]

xvii Support Information Y our computer is backed by an International Traveler’s W arranty (ITW) that gives you security and peace of mind when traveling. Our worldwide network of service centers are there to give you a helping hand. An ITW passport comes with your compute r. This passport contains all you need to know about the ITW program. A li[...]

Preface xviii Care and Maintenance T aking Care of Your Computer Y our computer will serve you well if you take care of it. ❑ Do not expose the computer to direct sunlight. Do not place near sources of heat, such as a radiator . ❑ Do not expose the computer to temperatures below 0ºC (32ºF) or above 50ºC (122ºF). ❑ Do not subject the compu[...]

xix using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating. T aking Care of your Batt ery Pack Here are some ways to take care of your battery pack: ❑ Use only batteries of the same kind as replacements (Model# CGP-E/618AE). Turn the power off before removing or[...]

Preface xx 330.book Page xx Friday, March 5, 1999 11:08 AM[...]

Getting Familiar with your Computer Chapter 1 330.book Page 1 Friday, March 5, 1999 11:08 AM[...]

This computer combines high-per for mance, versatility, power management featur es and multimedia capabilities with a unique style and er gonomic design. Work with unmatched p roductivity and r eliability with your new power computing partner . This chapter gives an in-depth "tour" of the computer’s many featur es. 330.book Page 2 Frida[...]

3 Features This computer was designed with the user in mind. Here are just a few of its many features: Performance ❑ Intel Pentium® II processor ❑ 64-bit main memory and L2 cache memory ❑ Large and vibrant Thin-Film- Transistor (TFT) SVGA Liquid Crystal Display (LCD) ❑ 64-bit PCI/AGP graphics acceleration with 2.5MB graphics memory ❑ Hig[...]

Chapter 1 Getting Familiar with your Computer 4 ❑ Universal Serial Bus (USB) port Human-centric Design and Ergonomics ❑ Ultra-slim, sleek, smooth and stylish design ❑ Full-sized keyboard ❑ Wide and curved palm rest ❑ Ergonomically-centered touchpad pointing device with scroll function Expansion ❑ CardBus PC Card (formerly PCMCIA) slot ([...]

5 Display The larg e graphics display offers excellent viewing, display quality and desktop per formance graphics. The computer supports a Thin-Film Transistor (TFT) liquid crystal display (LCD) displaying 32-bit true-color at 800x600 Super Video Graphics Array (SVGA) resolution. Video Performance PCI local bus video with 64-bit graphics accelerati[...]

Chapter 1 Getting Familiar with your Computer 6 device. For more inform ation, see “Setting Up Dual Display” on page 49. Opening and Closing the Display T o open the display, slide the display cover latch to the left and lift up the cover . Then tilt it to a comfortable viewing position. The computer employs a microswitch that turns of f the di[...]

7 Indicators The computer has six easy-to-read status icons on the right of the display screen. The Power and Standby status icons are visible even when you close the display cover so you can see the status of the computer while the cover is closed. # # # # Ico Ico Ico Ico n n n n Fu Fu Fu Fu n n n nc c c ct t t t ion ion ion ion De De De De sc sc [...]

Chapter 1 Getting Familiar with your Computer 8 Keyboard The keyboard has full-sized keys and an embedded keypad, separate cursor keys, two Wi ndows keys and twelve function keys. Special Keys Lock Keys The keyboard has three lock keys which you can toggle on and off. Lock Lock Lock Lock Ke Ke Ke Ke y y y y De De De De sc sc sc sc r r r ri p ip ip [...]

9 Embedded Numeric Keypad The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right corner of the keycaps. T o simplify the keyboard legend, cursor-control key symbols are not printed on the keys. Note: If an external keyboard or keypad is connected to the co mputer, the Num [...]

Chapter 1 Getting Familiar with your Computer 10 Windows Keys The keyboard has two keys that perfor m Windows-specific functions. Hot Keys The computer employs hot keys or key combinations to access most of the computer’s controls like screen brightness, volume output and the BIOS Utility. Ke Ke Ke Ke y y y y De De De De sc sc sc sc r r r ri p ip[...]

11 T o activate hot keys, press and hold the Fn key before pressing the other key in the hot key combination. Ho Ho Ho Ho t t t t K K K Ke e e ey y y y Icon Icon Icon Icon Fun Fun Fun Fun c c c ct t t t ion ion ion ion De De De De sc sc sc sc r r r ri p ip ip ip t t t t ion ion ion ion Fn-F1 Hot Key Help Displays help on hot keys. Fn-F2 Setup Acces[...]

Chapter 1 Getting Familiar with your Computer 12 The Euro Symbol If your keyboard layout is set to United States-International or United Kingdom, you can type the Euro symbol on your keyboard. Fn-F5 Display T oggle Switches display output between the display screen, external monitor (if connected) and both the display screen and external monitor Fn[...]

13 Important! (for US keyboard users): The keyboard layout is set when you first set up Windows. For the Euro symbol to work, the keyboard layout has to be set to United States-International. T o verify the keyboard type: 1. Click on Start , Settings , Contro l Panel . 2. Double-click on Keyboard . 3. Click on the Language tab. 4. V erify that the [...]

Chapter 1 Getting Familiar with your Computer 14 Keyboard Ergonomics Located below the keyboard, the wide and curved palm rest is er gonomically designed to provide you with a very comfortable place to rest your hands while you type. 330.book Page 14 Friday, March 5, 1999 11:08 AM[...]

15 T ouchpad The built-in touchpad is a PS/2-compatible pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. The central location on the palm rest provides optimum comfort and support. Note: When using an external mouse, you can press Fn-F7 to disable the interna[...]

Chapter 1 Getting Familiar with your Computer 16 These two buttons are similar to the left and right buttons on a mouse. Tapping on the touchpad produces similar results. ❑ Use the center (2) buttons (top and bottom) to scroll up or down a page. This button mimics your cursor pressing on the right scroll bar of Wi ndows applications. Note: Keep y[...]

17 Customizing the Center Button Y ou can customize the function of the center button as follows: 1. Click on Start , Settings , Contro l Panel . 2. Double-click on Mouse . 3. Click on the Button Actions tab. 4. Customize the settings for Rocker Switch. 5. Click on OK . 330.book Page 17 Friday, March 5, 1999 11:08 AM[...]

Chapter 1 Getting Familiar with your Computer 18 Storage This computer supplies you with all-in-one media storage: ❑ High-capacity Enhanced-IDE hard disk ❑ External EasyLink™ Combo Drive ■ Standard 3.5-inch floppy drive. ■ High-speed CD-ROM drive or DVD-ROM drive (EasyLink™ DVD Combo Drive) Hard Disk The removable hard disk module can b[...]

19 3. Firmly connect the EasyLink™ Combo Drive (connector to connector) to the computer . T o disconnect the EasyLink™ Combo Drive: 1. Click on the HotIDE icon on the Windows taskbar . 2. Select the stop operation. 3. Click on OK . 4. Disconnect the EasyLink™ Combo Drive. 5. Tuck in the EasyLink™ Combo Drive cable connector into its storage[...]

Chapter 1 Getting Familiar with your Computer 20 Ejecting the CD-ROM or DVD-ROM T r ay T o eject the CD-ROM or DVD-ROM tray when the computer is turned on, press the CD-ROM eject button. When the power is off, you can eject the CD-ROM drive tray using the emergency eject hole. See page 106. Playing DVD Movies Some models come standard with a DVD-eq[...]

21 Ports Ports allow you to connect peripheral devices to your computer as you would with a desktop PC. For instructions on how to connect different exter nal devices to the computer, s ee “Peripherals and Options” on page 47. Left Port # # # # Po Po Po Po rt rt rt rt Connec Connec Connec Connec t t t ts s s s to to to to ... ... ... ... 1 Easy[...]

Chapter 1 Getting Familiar with your Computer 22 Rear Ports # # # # Icon Icon Icon Icon Po Po Po Po rt rt rt rt Connec Connec Connec Connec t t t ts s s s to to to to ... ... ... ... 1 Modem jack Phone line 2 Power jack AC adapter and power outlet 3 PS/2 port PS/2-compatible device (e.g., PS/2 keyboard/mouse/keypad) 4 Infrared port Infrared device [...]

23 Fax/Data Modem Some models have a built-in V.90 56Kbps PCI fax/data modem. Warning! This modem port is not compatible with digital phone lines. Plugging this modem into a digital phone line will damage the modem. T o use the fax/data modem port, connect a phone cable from the modem port to a telephone jack. Start your communications software pro[...]

Chapter 1 Getting Familiar with your Computer 24 of up to four megabits per second (Mbps) at a distance of up to one meter . T o use FIR, position two IR-aware devices such that their IR ports are no more than one meter apart and offset no more than 15 degrees. When the two computers are in position, simply begin the data transfer as you normally w[...]

25 Right Ports PC Card Slot There is a type II/I CardBus PC Card slot found on the right panel of the computer . This slot accepts a credit-card-sized card that enhances the usability and expandability of the compute r. # # # # Ico Ico Ico Ico n n n n Po Po Po Po rt rt rt rt Connec Connec Connec Connec t t t ts s s s to to to to ... ... ... ... 1 P[...]

Chapter 1 Getting Familiar with your Computer 26 PC Cards (formerly PCMCIA) are add-on cards for portable computers, giving you expansion possibilities long afforded by desktop PCs. Popular type II cards include flash memory, SRAM, fax/data modem, LAN and SCSI cards. CardBus improves on the 16-bit PC card technology by expanding the bandwidth to 32[...]

27 3. Press the slot eject button (1) to pop out the eject button (2); then press it again to eject the card (3). 330.book Page 27 Friday, March 5, 1999 11:08 AM[...]

Chapter 1 Getting Familiar with your Computer 28 Audio The computer comes with 16-bit high-fidelity PCI stereo audio with further enhancements that include 3D sound for true audio immersion. There are audio ports on the right panel of the compute r. See “Audio Devices” on page 55 for more infor mation on connecting external audio devices. Adjus[...]

29 If the speaker icon is not displayed on the taskbar , enable this feature (show volume control on the taskbar) via the Multimedia icon in the Contro l Panel . 2. Click on the Options menu and select Advanced Co nt rols . 3. Click on the Advanced button that now appears in the Master V olume Balance column. 4. Click 3D Ef fect to enable the 3D ef[...]

Chapter 1 Getting Familiar with your Computer 30 Securing your Computer Security features include hardware and software locks — a security notch and passwords. Security Notch A security notch located on the rear panel of the computer lets you connect a Kensington-compatible key-based computer security lock. W rap a computer security lock cable ar[...]

31 password checkpoints on boot-up and resume from hibernation for maximum security. ❑ Hard Disk Password protects your data by preventing unauthorized access to your hard disk. Even if the hard disk is removed from the computer and moved to another computer , it cannot be accessed without the Hard Disk Password. Important! Do not forget your Set[...]

Chapter 1 Getting Familiar with your Computer 32 330.book Page 32 Friday, March 5, 1999 11:08 AM[...]

Operating on Battery Power Chapter 2 330.book Page 33 Friday, March 5, 1999 11:08 AM[...]

The computer operates on AC or battery power . This chapter contains the infor mation you need to know to operate the computer on battery powe r. It also includes info rmation on how your computer manages and saves power . 330.book Page 34 Friday, March 5, 1999 11:08 AM[...]

35 Batter y Pack The computer uses a battery pack that gives you long use between charg es. Batter y Pack Characteristics The battery pack has the following characteristics: ❑ Employs Current Battery Technology Standards The computer uses a Lithium-Ion battery pack which does not have the memory eff ect problem of Nickel Cadmium (NiCd) batteries.[...]

Chapter 2 Operating on Battery Power 36 Y ou only need to do this once with a new battery or with a battery that's been stored without being used for a long time. If the computer is to be stored for more than two weeks, we suggest you remove the battery pack. Battery power from a fully charged battery pack depletes in roughly a day with the co[...]

37 2. Lift up the battery pack to remove it from the battery bay. 3. Insert a replacement battery pack into the battery bay by following the figures below. Charging the Batter y T o char ge the battery, place the battery pack inside the battery bay and plug the AC adapter into the computer and an electrical outlet. Charging Modes The adapter has th[...]

Chapter 2 Operating on Battery Power 38 Charge-in-use mode When the computer is in use with the AC adapter plugged in, the computer also charges the battery pack if installed. This mode will take longer to fully charge a battery than rapid mode. In charge-in-use mode, a fully depleted battery gets fully charged in approximately six to seven hours. [...]

39 ❑ Use Sleep Manager to reserve hard disk space for the Hibern ation function. Keep it running in the background to automatically adjust the Hibernation file size. See “Sleep Manager” on page 76. ❑ Use the AC adapter whenever possible so that the battery is reserved for on-the-go computing. ❑ Keep the battery pack in the computer powere[...]

Chapter 2 Operating on Battery Power 40 ❑ The power indicator flashes at regular intervals until battery power is depleted. When you receive a battery-low warning, you have around two minutes to save your work. If you do not connect the AC adapter within this period, the computer enters Hibernation mode if the Sleep Upon Battery-low parameter in [...]

41 An extra fully- charged battery pack available 1. Save all necess ary files. 2. Exit the application. 3. Power off the comput er. 4. Replace the batt ery pack. 5. Power on the computer and resume work. or 1. Save all necess ary files. 2. Enter Hibernation mode. 3. Replace the batt ery pack. 4. Resume from Hibernation mode. AC adapter or power ou[...]

Chapter 2 Operating on Battery Power 42 Power Management This computer has a built-in power management unit that monitors system activity. System activity refers to any activity involving one or more of the following devices: keyboard, mouse, floppy drive, hard disk, peripherals connected to the serial and parallel ports, and video memory. If no ac[...]

43 "Automatic Dim" Feature The computer has a unique "automatic dim" power-saving feature. When the computer is using AC power and you disconnect the AC adapter from the computer , it automatically dims the LCD backlight to save po wer. If you reconnect AC power to the computer , it automatically adjusts the LCD backlight to a b[...]

Chapter 2 Operating on Battery Power 44 The following signals indicate that the computer is in Standby mode: ❑ The buzzer beeps ❑ The Standby indicator lights Warning! Unstored data is lost when you turn off the computer power in Standby mode or when the battery is drained. T o leave Standby mode and return to n ormal mode: ❑ Press any key ?[...]

45 Battery-low parameter in the BIOS Utility is enabled ❑ When the advanced power button function(s) in the Notebook Manager program is/are set to Hibernation mode ❑ Invoked by the operating system power-saving modes Note: If the computer beeps but does not enter Hibernation mode after pressing the Hibernation hot ke y, it means the operating s[...]

Chapter 2 Operating on Battery Power 46 Advanced Power Management This computer supports the APM standard designed to further reduce power consumption. APM is a power-management approach defined jointly by Microsoft and Intel. An increasing number of software packages support APM to take advantage of its power-saving features and allow greater syst[...]

Peripherals and Options Chapter 3 330.book Page 47 Friday, March 5, 1999 11:08 AM[...]

Y our computer offers excellent expansion capabilities with its built- in ports and connectors. This chapter describes how to connect peripherals and hardwar e options that help you use your computer with ease. When connecting peripherals, read the manual included with the peripheral for operating instructions. You can purchase most of these and ot[...]

49 External Monitor T o show graphical ef fects on a la rger display, connect an external monitor to the external display port. Read the monitor manual for additional instructions. Note: If an external monitor is not connected, closing the display cover puts the computer into standby mode. Setting Up Dual Display Dual display allows you to expand y[...]

Chapter 3 Peripherals and Options 50 f. Set the colors and screen area parameters for the second display device. g. Click on Advanced... and click on the Monitor tab. h. Click on Change... and follow the instructions on the screen. i. Click on OK . 330.book Page 50 Friday, March 5, 1999 11:08 AM[...]

51 Printer This computer supports both serial and parallel printers. For a serial printer , plug the printer cable into a serial port. For a parallel printer , plug the printer cable into the parallel port. See your printer manual for operating instructions. Note: If the printer does not function, enter the BIOS Utility and verify that the parallel[...]

Chapter 3 Peripherals and Options 52 External Pointing Device This computer accepts a PS/2-compatible, serial or USB mouse or similar pointing device. Note: When using an external mouse, you may choose to disable the internal touchpad by pressing Fn-F7 . External PS/2 Mouse The built-in touchpad works alternately with an exter nal PS/2 mouse which [...]

53 External USB Mouse Plug the USB mouse into the USB port. See “USB Devices” on page 57 for more information. 330.book Page 53 Friday, March 5, 1999 11:08 AM[...]

Chapter 3 Peripherals and Options 54 External Keyboard and Keypad This computer has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible external keyboard. T o connect an exte rnal keyboard, plug the ex ternal keyboard into the PS/2 connecto r. Y ou can also[...]

55 Audio Devices Audio devices are easy to connect with the audio ports accessible from the right side of the computer . Y ou can plug in an exter nal microphone to the microphone-in jack, an audio line-in device to the line-in jack, and amplified speakers or headphones to the line-out jack. 330.book Page 55 Friday, March 5, 1999 11:08 AM[...]

Chapter 3 Peripherals and Options 56 PC Cards The computer has one CardBus PC card slot that accommodates one type I/II PC card. Please consult your dealer for PC card options available that you can purchase for your computer . Note: For more information on how to use a PC Card with the computer , see “PC Card Slot” on page 25. 330.book Page 56[...]

57 USB Devices The computer has a USB (Universal Serial Bus) port that allows you to connect peripherals without occupying too many resources. Common USB devices include the mouse and keyboard. Most USB devices also include a built-in USB port connector which allows you to daisy-chain other USB devices. Note: The USB feature must be enabled in BIOS[...]

Chapter 3 Peripherals and Options 58 Miscellaneous Options Additional Power Packs Y ou can order spare batteries and an AC adap ter. Batte ry Pack It is good practice to have a spare battery around, especially when you travel. The Lithium-Ion battery, coupled with power management features, supplies you with more power on-the-go. AC Adapter The com[...]

59 Connect the single connector end of the Y-bridge cable to the computer’s PS/2 port and the double connector ends to the two PS/2 devices. File Transfer Cable Besides using the infrared port, you can also transfer files between computers using a file transfer cable. Connect the file transfer cable between the parallel ports of the two computers[...]

Chapter 3 Peripherals and Options 60 Key Component Upgrades Y our computer delivers superior power and perfo rmance. However , some users and the applications they use may demand more. This computer allows you to upgrade key components when you need increased perfo rmance. Note: Contact your authorized dealer if you decide to perform a key componen[...]

61 2. Remove the screws from the memory door; then lift up and remove the memory door 3. Insert the memory module diagonally into the slot, then gently press it down until it clicks into place. 4. Replace the memory door and secure it with the screw. The computer automatically detects and reconfigures the total memory size. Hard Disk Upgrade Y ou c[...]

Chapter 3 Peripherals and Options 62 Installing a Replacement Hard Disk Follow these steps to install a hard disk: 1. Turn o ff the compute r, unplug the AC adapter (if connected) and remove the battery pack. Turn the computer over to access its base. 2. Locate the hard disk bay. Remove the hard disk bay screw. 3. Pull out the hard disk. 4. Insert [...]

Moving with your Computer Chapter 4 330.book Page 63 Friday, March 5, 1999 11:08 AM[...]

This chapter gives you tips and hints on things to consider when moving ar ound or traveling with your computer . 330.book Page 64 Friday, March 5, 1999 11:08 AM[...]

65 Disconnecting from the Desktop Follow these steps to disconnect your computer from external accessories: 1. Save your work in progress. 2. Remove any media, diskette and compact disc, from the EasyLink™ Combo Drive. 3. Shut down the operating system. 4. Turn off the compute r. 5. Disconnect the EasyLink™ Combo Drive from the computer , if ne[...]

Chapter 4 Moving with your Computer 66 Moving Around when you ar e just moving within short distances, for example, fr om your office desk to a meeting room Preparing the Computer Before moving the computer , close and latch the display cover to place it in Standby mode. Y ou can now safely take the computer anywhere you go within the building. T o[...]

67 T aking the Computer Home when you ar e moving fr om your office to your home or vice versa Preparing the Computer After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home: ❑ Check if you have removed all media, diskette and compact disc, from the EasyLink™ Combo Drive. Failure to remov[...]

Chapter 4 Moving with your Computer 68 the trunk of the car to avoid exposing the computer to excessive heat. ❑ Changes in temperature and humidity can cause condensation. Allow the computer to return to room temperature, and inspect the screen for condensation before turning on the computer . If the temperature change is greater than 18°F (10°[...]

69 T raveling with the Computer when you ar e moving within a lar ger distance, for instance, fr om your office building to a client’s of fice building or traveling locally Preparing the Computer Prepare the computer as if you were taking it home. Be sure the battery in the computer is charged. Airport security may require you to turn on your com[...]

Chapter 4 Moving with your Computer 70 T raveling Internationally with the Computer when you ar e moving fr om country to country Preparing the Computer Prepare the computer as you would normally prepare it for traveling. What T o Bring with Y ou Bring the following items with you: ❑ AC adapter ❑ Power cords that are appropriate to the country [...]

71 ❑ If you are using the modem, check if the modem and connector is compatible with the telecommunications system of the country you are traveling in. 330.book Page 71 Friday, March 5, 1999 11:08 AM[...]

Chapter 4 Moving with your Computer 72 330.book Page 72 Friday, March 5, 1999 11:08 AM[...]

Softwar e Chapter 5 330.book Page 73 Friday, March 5, 1999 11:08 AM[...]

This chapter discusses the important system utilities bundled with your computer . 330.book Page 74 Friday, March 5, 1999 11:08 AM[...]

75 The computer comes preloaded with the following software: ❑ Windows 98 or W indows NT operating system ❑ BIOS Utility ❑ System utilities, drivers and application software Note: T o access Windows software applications, click on the Start button and select the application folder . Then click on the application icon to run the selected appli[...]

Chapter 5 Software 76 Sleep Manager Most notebook computers feature built-in power-saving functions. This computer has two power management modes, Standby and Hibernation. While Standby puts your computer into a light sleep state, Hibern ation shuts off all power after saving the current state of your computer . The next time you slide the power sw[...]

77 ❑ On the T askbar The computer automatically loads Sleep Manager every time you start Windows. Sleep Manager resides in the background and appears as an icon on the taskb ar. Double-click on the Sleep Manager status icon if enabled to bring up the main Sleep Manager program. The icon also shows the current status of the Hibern ation feature, a[...]

Chapter 5 Software 78 Sleep Manager Functions Create Sleep Manager automatically finds a contiguous area on your hard disk and creates the Hibernation file in this space. You can also perfor m this function by clicking on the Cr eate button. When you click on the Create button, a dialog box pops up: I II Ite te te te m m m m De De De De sc sc sc sc[...]

79 Select OK to automatically create the Hiber nation file. Sleep Manager displays the recommend size based on onboard syste information. You can also choose Advanced>> to manually set the space settings and size. The advanced screen shows below. Sleep Manager automatically checks the system configuration and displays the recommended size. Th[...]

Chapter 5 Software 80 Remove If you want to use or take back the reserved space, click on the Remove button. This will disable the Hibernation feature. Instead, the computer will only be able to enter Standby mode. Minimize Minimize Sleep Manager by selecting the Minimize button. If the Enable indicator on taskbar box is checked, Sleep Manager will[...]

81 Notebook Manager The computer has a built-in system setup program called Notebook Manager . The Windows-based Notebook Manager allows you to set passwords, the startup sequence of the drives and power management settings. It also shows current hardware configurations. Note: Certain hot key functions are disabled when you access the Notebook Mana[...]

Chapter 5 Software 82 Information Viewer Information Viewer summarizes and lists information about the specifications and settings of the different components of your computer . Note: Items in this table may differ from the ones onscreen. I II Ite te te te m m m m De De De De sc sc sc sc r r r ri ii ip p p pt t t t ion ion ion ion CPU Brand, type a[...]

83 The current version of the computer’s BIOS shows before the Device-Configuration table. POST POST (Power On Self-T est) defines how your computer behaves when starting up. Parallel Port Resour ce settings of the parallel port External Cache T otal amount of external cache memor y (in kilobytes) T ouchpad Setting of the internal pointing device[...]

Chapter 5 Software 84 There are items in this screen include: Boot Sequence Boot Sequence defines the boot sequence to follow when your computer boots up. The Boot Sequence screen displays the bootable devices in your computer and the order in which the booting sequence will occur . The devices include the following: I II Ite te te te m m m m De De[...]

85 ❑ Floppy Drive ❑ IDE Hard Drive ❑ CD-ROM/DVD-ROM Drive Simply drag and drop the devices to change the booting order. Click on Apply to accept. Password Password is used to set, modify or delete the password(s) for your computer . There are two passwords you can set using the Notebook Manager: ❑ Setup Password prevents unauthorized access[...]

Chapter 5 Software 86 Setting the P ower-On Password T o set the Power-On Password, follow these steps: 1. Click on the Change Power-On Passw ord button. 2. Click on the Enable Power- On Password checkbox. 3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your Power-On Password[...]

87 3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your Setup Password. 4. Click in the Confirm Password textbox and retype the password. 5. Click on OK . Note: T o change a password, follow the same steps used to set a password. T o remove a password, follow the same steps u[...]

Chapter 5 Software 88 Setting Advanced Features T o set advanced features, do the following: 1. Click on the Advanced button. 2. Set the advanced features. The settings in this screen determine how the computer behaves when you (a) close the display, (b) press the power switch, and (c) press the Sleep button Fn-F4 . Options include the following: ?[...]

89 Display Device Display Device is used to control various settings related to display device(s), such as the display brightness level. The items in this screen include: Click on the radio button of the desired item, then click on Apply . T o modify the brightness level, click and hold the slider control and move to the right to increase, or move [...]

Chapter 5 Software 90 BIOS Utility The BIOS Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Ouput System). Y our computer is already properly configured and optimized, and you do not need to run this utility. Ho wever, if you encounter configuration problems, you may need to run this program. Please also r[...]

91 ❑ use the cursor up/down keys to move between the parameters ❑ use the cursor left/right keys to change the value of a parameter Y ou can change the value of a parameter if it is enclosed in square brackets. ❑ press Esc to exit the current sub-menu At the main menu, press Esc to exit the BIOS Utility. If you make any changes, the following[...]

Chapter 5 Software 92 The following table describes the information in this sub-menu. Note: “x” may refer to a series of numbers and/or characters or a combination of both. Parameter Description Format CPU Type & Speed Shows the type and speed in Megahertz of the Central Processing Unit (CPU). Floppy Disk Drive Shows the floppy disk drive t[...]

93 The items in this sub-menu are important and vital information about your computer . If you experience computer problems and need to contact technical support, this data helps our service personnel know more about your compute r. Basic System Settings The Basic System Settings sub-menu allows you to set the system date and time. The following ta[...]

Chapter 5 Software 94 Startup Configuration The Startup Configuration sub-menu contains parameter values that define how your computer behaves on system startup. The following table describes the parameters in this sub-menu. Settings in boldface are the default and suggested parameter settings. Pa Pa Pa Pa ra ra ra ra me me me me te te te te r r r [...]

95 Setting the Boot Drive Sequence The Boot Drive Sequence section lists boot priorities (1st, 2nd and 3rd) for bootable drives in your computer For example, the default value (1st:Floppy Disk, 2nd:Hard Disk, and 3rd:CD-ROM) tells the computer to first search for a bootable floppy disk in the floppy drive. If it finds one present, it boots up from [...]

Chapter 5 Software 96 T o set the boot drive sequence, use the cursor up/down keys to select a priority level (1st, 2nd, or 3rd); then use the cursor left/ right keys to select the device for that priority level. Onboard Devices Configuration The parameters in this screen are for advanced users only. You do not need to change the values in this scr[...]

97 System Security The System Security sub-menu allows you to safeguard your computer and data with passwords and other security measures. IrDA Port Enables or disables the infrared port. When enabled, you can set the base I/O address, interrupt request (IRQ) and direct memo ry access (DMA) channel of the infrared port. Enabled or Disabled 2F8h , 3[...]

Chapter 5 Software 98 The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Setting a Password Follow these steps: 1. Use the cursor up/down keys to highlight a Password parameter (Setup, Power-on or Hard Disk) and press the Enter key. The password box appears: 2. Type a [...]

99 Important! Be very careful when typing your password because the characters do not appear on the screen. 3. Press Enter . Retype the password to verify your first entry and press Enter . After setting the password, the computer automatically sets the chosen password parameter to Present. Removing a Password Should you decide to remove a password[...]

Chapter 5 Software 100 Power Management The Power Management screen contains parameters that are related to power-saving and power management. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Note: If your system has ACPI, all power management functions are taken car[...]

101 T urn Off Hard Disk Sets the timeout value before the hard disk enters power saving mode. Disabled or time values System Standby Sets the timeout value before the computer enters Standby mode. Disabled or time values System Hibernate After Standby Sets the timeout value before the computer enters Hibernation mode. Disabled or time values System[...]

Chapter 5 Software 102 Load Default Settings If you want to restore all parameter settings to their default values, select this menu item and press Enter . The following dialog box displays: If you would like to load default settings for all parameters, use the cursor left/right keys to select Ye s ; then press Enter . Otherwise, choose No . 330.bo[...]

T r oubleshooting Chapter 6 330.book Page 103 Friday, March 5, 1999 11:08 AM[...]

This chapter instructs you on how to deal with common system pr oblems. Read it befo re calling a technician if a problem occurs. Solutions to mor e serious pr oblems r equir e opening up the computer . Do not attempt to open the computer by yourself. Contact your dealer or an authorized service center for assistance. 330.book Page 104 Friday, Marc[...]

105 Frequently-Asked Questions The following is a list of possible situations that may arise during the use of your compute r. Easy answers and solutions are provided for each one. I pressed the power switch and opened the displ ay, but the computer does not start or boot-up. Look at the Power indicator: ❑ If it is not lit, no power is being appl[...]

Chapter 6 T roubleshooting 106 If pressing a key does not turn the display back on, two things might be the cause: ❑ The brightness level might be too low. Press Fn-<cursor right> and Fn-<cursor left> to adjust the brightness level. ❑ The display device might be set to an external monito r. Press the display toggle hot key Fn-F5 to [...]

107 The keyboard does not respond. T ry attaching an external keyboard to the PS/2 connector on the computer’s rear . If it works, contact your dealer or an authorized service center as the intern al keyboard cable may be loose. The serial mouse does not work. Check the following: ❑ Make sure that the serial cable is plugged securely into the s[...]

Chapter 6 T roubleshooting 108 apart. ❑ Make sure there is a clear path between the two infrared ports. Nothing should be blocking the ports. ❑ Make sure you have the appropriate software running on both devices (for file transfers) or you have the appropriate drivers (for printing to an infrared printer). ❑ During POST , press F2 to access t[...]

109 The free disk space that Sleep Manager requires needs to be contiguous. T o solve this problem, use tools such as Disk Defragmenter (Wi ndows) to compact these free d isk spaces. Then run Sleep Manager again to create the file. ❑ Disk compression utilities are used. Sleep Manager can work with most compression software. However , Sleep Manage[...]

Chapter 6 T roubleshooting 110 T roubleshooting Tips This notebook computer incorporates an advanced design that delivers onscreen error message reports to help you solve problems. In addition, this series of notebook computers ship with PC-Docto r, a powerful diagnostic tool, that helps you determine hardware configuration and clarify hardware or [...]

111 If PC-Doctor does not report a system error , reinstall the software driver from the Recovery CD for the component you suspect has a problem. If you still have problems, you can access our online and Internet technical support services. Please see the following section for details. 330.book Page 111 Friday, March 5, 1999 11:08 AM[...]

Chapter 6 T roubleshooting 112 Online Ser vices There are three ways to access Acer for technical support and information: ❑ Internet service worldwide, visit http://www.ace r.com/ ❑ Online service in the United States and Canada, call 1-800- 816-2237 ❑ T echnical support numbers in various countries Y ou can view a list of technical support [...]

113 T elephone number:_____________________________ Machine and model type:_______________________ Serial number:_________________________________ Date of purchase:______________________________ 330.book Page 113 Friday, March 5, 1999 11:08 AM[...]

Chapter 6 T roubleshooting 114 Error Messages If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action. Error Messages Corrective Action CMOS Batter y Bad Contact your dealer or an authorized se rvice cen ter. C[...]

115 Insert system diskette and press <Enter> key to reboot Insert a system (bootable) diskette in the floppy drive (A:), then press Enter to reboot. Keyboard Error or No Keyboard Connected Contact your dealer or an authorized service cen ter. Keyboard Inter face Error Contact your dealer or an authorized service cen ter. Memor y Size Mismatch[...]

Chapter 6 T roubleshooting 116 If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems may be solved using the BIOS Utility. See “BIOS Utility” on page 90. Video RAM BIOS Bad Contact your dealer or an authorized se rvice cen ter. Error [...]

Specifications Appendix A 330.book Page 117 Friday, March 5, 1999 11:08 AM[...]

330.book Page 118 Friday, March 5, 1999 11:08 AM[...]

119 This appendix lists the general specifications of your compute r. Microprocessor Intel Pentium® II processor with 256KB L2 cache memory Memor y ❑ Main memory expandable to 256MB Synchronous Dynamic Random Access Memory (SDRAM) ❑ Two 144-pin industry-standard soDIMM sockets ❑ 64-bit dual memory banks ❑ 512KB Flash ROM BIOS Data Storage [...]

Appendix A Specifications 120 ❑ Sound Blaster Pro- (DOS Emulation) and Wi ndows Sound System-compatible ❑ Separate audio ports for line-out, line-in and microphone-in devices Keyboard and Pointing Device ❑ 85-/89-key Wi ndows keyboard ❑ Ergonomically-centered touchpad pointing device with scroll function I/O Ports ❑ One type II/I CardBus [...]

121 ❑ Non-operating: -20°C ~ 60°C Humidity (non-condensing) ❑ Operating: 20% ~ 80% RH ❑ Non-operating: 20% ~ 80% RH System ❑ Windows 98 or W indows NT (option) operating system with APM or ACPI ❑ DMI 2.1-compliant ❑ ADM support Batter y Pack ❑ 30W a ttHour Lithium-Ion ❑ Smart battery management technology ❑ 2~3-hour rapid charge[...]

Appendix A Specifications 122 330.book Page 122 Friday, March 5, 1999 11:08 AM[...]

123 Index Numerics 3D enhanced function enabling 28 A AC adapter caring for xviii connecting xiv AcerMedia Drive 18 ACPI. See Advanced Configuration and Power Interface Advanced Configuration and Power In- terface 46 Advanced Power Management 46 APM. See Advanced Power Management audio 28 connecting externally 55 troubleshooting 106 B battery insta[...]

124 setting up a home office 68 taking home 67 traveling internationally 70 traveling on local trips 69 troubleshooting 104 turning on xiv connections AC adapter xiv audio 55 computer xiv file transfer cable 59 keyboard, external 54 keypad, external 54 monitor 49 mouse 52 mouse, PS/2 52 mouse, serial 52 printer 51 PS/2 y-bridge cable 58 USB 57 cont[...]

125 Windows keys 10 keyboard ergonomics 14 keypad connecting externally 54 L LEDs 7 M media access on indicator 7 memory installing 60–61 upgrading 60 messages error 114 modem 23 monitor connecting 49 mouse connecting externally 52 troubleshooting 107 N Notebook Manager 81–89 Boot Sequence 84 Display Device 89 hot key 11 Information Viewer 82 P[...]

126 startup 105 troubleshooting 104 PS/2 mouse connecting 52 PS/2 y-bridge cable connecting 58 Q questions multiple PS/2 devices 107 setting location for modem use 108 S safety CD-ROM xi FCC notice vii general instructions ix lithium battery xii modem notices viii scroll lock 8 security keylock 30 passwords 30 serial mouse connecting 52 serial port[...]