Deutsch dropdown-ico

Acer X1160Z Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Acer X1160Z an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Acer X1160Z, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Acer X1160Z die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Acer X1160Z. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Acer X1160Z sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Acer X1160Z
- Den Namen des Produzenten und das Produktionsjahr des Geräts Acer X1160Z
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Acer X1160Z
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Acer X1160Z zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Acer X1160Z und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Acer finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Acer X1160Z zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Acer X1160Z, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Acer X1160Z widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    SER VICE MANUAL SI : TSE: Check: Approved: Date Revise V ersion Description 2007.08.27 V1.0 Initial Issue 2008.07.09 V2.0 Add X1 160 Refresh/X1260 Refresh 2008.08.25 V3.0 Add X1 160Z/X1 160Z Refresh 2008.10.10 V4.0 Add X1260K Refresh X1 160 Series/X1260 Series X1 160Z Series/X1260K Refresh Copyright October .2008. All Rights Reserved P/N: 36.88T03G[...]

  • Seite 2

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential P ARTS X1 160 X1 160refresh X1 160Zrefresh X1 160Z X1260 X1260refresh X1260Krefresh LOGO MYLAR 35.88T02G001 35.88T03G001 35.89B02G001 IO MYLAR 35.88T01G001 35.89B01G001 THERMAL SWITCH N/A 43.89T17G001 DMD 48.87K01G001 48.87M01G001 48.89B01G001 SPEAKER N/A 49.89B01G001 BLOW- ER1 [...]

  • Seite 3

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential Preface This manual is applied to X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh projection system. The manual gives you a brief description of basic technical information to help in service and maintain the product. Y our customers will appreciate the quick response t[...]

  • Seite 4

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential T able of Content Chapter 1 Introduction Highlight 1-1 Compatible Mode 1-3 Product Overview 1-5 Chapter 2 Disassembly Process Equipment Needed & Product Overview 2-1 Disassemble Lamp Cover Module 2-2 Disassemble Lamp Module 2-2 Disassemble T op Cover Module 2-3 Disassemble T[...]

  • Seite 5

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential Assemble L VPS Module 2-20 Assemble Lamp Driver Module 2-21 Assemble Interrupt Switch Module 2-22 Assemble Fan Module 2-23 Assemble Speaker Module(For X1260 Refresh/X1260 only) 2-24 Assemble DMD Board and DMD Chip 2-25 Assemble Engine Module 2-26 Assemble Color Wheel Module 2-27[...]

  • Seite 6

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential Optical Performance Measure 4-1 1 O t h e r 4 - 1 2 Chapter 5 Firmware Upgrade Equipment Needed 5-1 DLP Composer Lite Setup Procedure 5-2 USB Driver Upgrade Procedure 5-4 Firmware Upgrade Procedure 5-5 W aveform Download 5-8 Chapter 6 EDID Upgrade EDID Introduction 6-1 Equipment[...]

  • Seite 7

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-1 Chapter 1 Introduction 1-1 Highlight No Item Description 1 Dimensions (LxWxH) - 267 mm x 187 mm x 80 mm 2 Weight - <5 lbs 3 T ilt Angle - 7 degree with elevator mechanism (for X1 160/X1260/ X1 160Z) - 3 degree with elevator mechanism (for X1 160 refresh /X1260 refresh/X1 [...]

  • Seite 8

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-2 No Item Description 8 Contrast Engineering Spec: - 1500 : 1 Full White and Black (Minimum; Full power mode) (for X1 160/X1260/X1 160Z) - 1800 : 1 Full White and Black (T ypical; Full power mode) (for X1 160/X1260/X1 160Z) - 1400 : 1 Full White and Black (Minimum; Full power [...]

  • Seite 9

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-3 No Item Description 16 Number of active dots - Number of active dots : 800(H) x 600(V) (for X1 160/ X1 160 refresh/1 160Z/X1 160Z refresh) - Number of active dots : 1024(H) x 768(V) (for X1260/X1260 refresh/X1260K refresh) 17 Input signal spec. - Hsync Frequency 31 ~ 69 kHz [...]

  • Seite 10

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-4 Compatibility Resolution V -Sync [Hz] H-Sync [KHz] VGA 640x480 60 31.50 640x480 72 37.90 640x480 75 37.50 640x480 85 43.30 720x400 70 31.50 720x400 85 37.90 SVGA 800x600 56 35.10 800x600 60 37.90 800x600 72 48.10 800x600 75 46.90 800x600 85 53.70 832x624 75 49.70 XGA 1024x76[...]

  • Seite 11

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-5 VGA Analog - Extended Wide timing Compatibility Resolution V -Sync [Hz] H-Sync [KHz] WXGA 1280x768 60 48.36 1280x768 75 60.30 1280x720 60 44.80 1280x768 (For X1260/X1260 re - fresh/X1260K refresh) 85 68.60 1280x800 60 49.60 1440x900 60 59.90[...]

  • Seite 12

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-6 Product Overview Projector Outlook Front /Upper side Item Description Item Description 1 Zoom ring (X1260 series/ X1260K Refresh) 5 Power button and Power Indicator LED 2 Focus ring 6 Remote controller 3 Zoom lens 7 Remote control receiver 4 Lens cap[...]

  • Seite 13

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-7 Rear side Item Description Item Description 1 PC analog signal/HDTV/component video input connector 6 KensingtonTM lock port 2 S-Video input connector 7 RS232 connector (Only for X1260 refresh/ X1260/X1260K refresh) 3 Composite video input connector 8 Monitor loop-through ou[...]

  • Seite 14

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-8 Remote Control and Control Panel Layout Item Icon Function Description 1 Infrared transmitter Sends signals to the projector . 2 Power/Power LED Power button and Power Indicator LED. 3 POWER Refer to the “T urning the Projector On/Off” section. 4 MENU • Press “MENU?[...]

  • Seite 15

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-9 Item Icon Function Description 10 RESYNC Automatically synchronizes the projector to the input source. 11 SOURCE Press “SOURCE” to choose RGB, Component, S-Video, Composite and HDTV sources. 12 HIDE Momentarily turns off the video. Press “HIDE” to hide the image, pre[...]

  • Seite 16

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-10 Connecting the Projector Item Description Item Description 1 Power cord 5 S-Video cable 2 VGA cable 6 Audio cable jack/jack 3 Composite video cable 7 RS232 cable 4 USB cable Note: T o ensure the projector works well with your computer ,please make sure the timing of the dis[...]

  • Seite 17

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-1 1 X1 160 Refresh/X1 160/X1 160Z Refresh/X1 160Z ADC AD9883A Svideo Input DDP2230 ASIC DAD2000 0.55" 2xLVDS SVGA DMD Chip Display Image Color Wheel RGB Light Source LAMP Light Source LVPS DC 12V LAMP DRIVER DC 380V Power AC 100~240V Photo Sensor CVBS Input VGA IN Por t U[...]

  • Seite 18

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-12 X1260 Refresh/X1260/X1260K Refresh[...]

  • Seite 19

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 1-13 Bottom Cover Dimension[...]

  • Seite 20

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-1 Chapter 2 Disassembly& Assembly Process 2-1 Equipment Needed & Product Overview 1. Screw Bit (+) :107 2. Hex Sleeves 5mm 3. Screw Bit (+) :102 4. Screw Bit (-) :102 5. Long Nose Nipper 6. T weezers 7. X1 160/X1 160 refresh/X1260/X1260 refresh/X1 160Z/X1 160Z refresh [...]

  • Seite 21

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-2 2-3 Disassemble Lamp Module 1. Unscrew 2 screws on the lamp module 2-2 Disassemble Lamp Cover Module 1. Unscrew 2 screws on the lamp cover module Lamp Module Lamp Cover Module[...]

  • Seite 22

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-3 2-4 Disassemble T op Cover Module 1. Unscrew 2 screws on the unit base 2. Use the tweezers to scratch sharply on the both side Note:Y ou’d better drop out two tenons in the back side before disassemble the top cover module.(As the red square) And then the rest of the two t[...]

  • Seite 23

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-4 2-5 Disassemble T op Shielding 1. Unscrew 7 screws on the top shielding 2-6 Disassemble Front Cover Module 1. Unscrew 1 screw on front cover module (Only for X1260/X1260 Refresh/X1260 Refresh) 2. Press four tenons to disassemble the front cover module - First,disassemble rig[...]

  • Seite 24

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-5 - Then,the left side of the front cover is the same as the right side Note: Avoid touch the lens when disassem- ble the front cover . Front Cover Module[...]

  • Seite 25

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-6 2-7 Disassemble Main Board Module & Back Cover Module 1. Unscrew 3 screws and 5 connectors on main board module & back cover module(X1 160/X1 160 Refresh/X1 160Z/ X1 160Z refresh) Unscrew 3 screws and 6 connectors on main board module & back cover module(X1260/X1[...]

  • Seite 26

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-7 2. Unscrew 1 screw on main board module & back cover module Note:Use the Long Nose Nipper to lock the hex screw nut. 3. Unscrew 2(4 for X1260/X1260 Refresh/ X1260K Refresh ) hex screws on main board module & back cover module Main Board Module Back Cover Module For ([...]

  • Seite 27

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-8 2-8 Disassemble Color Wheel Module 1. Unscrew 1 screw on mylar 2. Unscrew 2 screws on color wheel module 3. Unscrew 1 screw on photo sensor Mylar[...]

  • Seite 28

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-9 2-9 Disassemble Engine Module 1. Unscrew 4 screws on engine module 2. Unscrew 2 screws on engine module to disassemble the zoom ring and zoom ring holder( X1260/X1260 Refresh/ X1260K Refresh only) 3. Unscrew 3 screws on focus ring Engine Module Focus Ring For (X1260/ X1260 R[...]

  • Seite 29

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-10 2-10 Disassemble DMD Board and DMD Chip 1. Unscrew 2 screws on engine module, disassemble Heat Sink and DMD Board&DMD chip module 2. Unlock the lockhole by Screw Bit(-) to disassemble the DMD chip from the DMD board Note:It will be unlocked if the Screw Bit(-) turn reve[...]

  • Seite 30

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-1 1 2-1 1 Disassemble Speaker Module(For X1260/ X1260 Refresh/X1260K Refresh) 1. Unscrew 1 screw and press 2 tenons to disassemble Speaker Module - Press the plastic of the speaker Holder and then use the tweezers to press the tenon. 2. Press two tenons to disassemble the spea[...]

  • Seite 31

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-12 2-12 Disassemble Fan Module 1. Unscrew 4 screws on the fan module Note:The fan cable pass through from the aperture.[...]

  • Seite 32

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-13 2-13 Disassemble Interrupt Switch Module 1. Unplug 1 connector and unscrew 1 screw and disassemble 1 lm tape to disassemble interrupt switch module Note: Interrupt switch cable must be pass through a dent and a aperture.And use a lm tape to x the cable in the dent.[...]

  • Seite 33

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-14 2-14 Disassemble Lamp Driver Module 1. Unplug 1 c onnector and unscrew 1 sc rew on lamp driver module 2. Unplug 1 connector and unscrew 2 screws on lamp driver to lamp cable Note : The l amp dr iver t o lamp cable must b e pass through two Dents.(As the yellow square) 3. Un[...]

  • Seite 34

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-15 2-15 Disassemble L VPS Module 1. Unscrew 1 ground screw(As red circle) 2. Unscrew 1 screw on L VPS module(As yellow circle) 3. Disassemble L VPS BRKT 4. Unscrew 3 screws on L VPS module(As green circle) L VPS BRKT L VPS Module[...]

  • Seite 35

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-16 2-16 Disassemble Bottom Cover Module 1. Unscrew 1 screw on bottom cover module 2. Disassemble 1 EMI tape 3. Disassemble the bottom cover shielding from bottom cover module 4. Press two tenons to disassemble the ROD DUCT - Pull aside the iron sheet with T weezers to disassem[...]

  • Seite 36

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-17 Bottom Cover Module 2-17 Rod Adjustment 1. environment adjustment - The distance between the engine and the screen is 1.7 M - This process should be done at a dark environment. (under 5 Lux) 2. Procedure adjustment - Change the screen to “white screen.” - Adjust the scr[...]

  • Seite 37

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-18 3. Abnormal image inspection - It sh ould no t have any abnorm al col or at t he rim of the image by estimating through the eyes. Note: T o avoid over adjust the rod. After the opration,please use the glue to xed the screws. 2-18 Re-write Lamp Usage Hour - T ake X1260 fo[...]

  • Seite 38

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-19 2-19 Assemble Bottom Cover Module 1. Fasten two tenons to assemble ROD DUCT 2. Assemble the bottom cover shielding on bottom cover module 3. Stick 1 EMI tape 4. Screw 1 screw on bottom cover module ROD DUCT Bottom Cover Module Bottom Cover shielding[...]

  • Seite 39

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-20 2-20 Assemble L VPS Module 1. Screw 3 screws on L VPS module(As green circle) 2. Screw 1 screw to assemble L VPS BRKT (As yellow circle) 3. Screw 1 ground screw(As red circle) L VPS BRKT L VPS Module[...]

  • Seite 40

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-21 2-21 Assemble Lamp Driver Module 1. Screw 4 screws to assemble lamp driver module on lamp driver holder 2. Plug 2 connectors to assemble 3PIN and 5PIN cable Note:The 3 PIN and 5 PIN cable must be pass through a Dent.(As the yellow square) 3. Plug 1 connector and screw 2 scr[...]

  • Seite 41

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-22 Interrupt Switch&holder 2-22 Assemble Interrupt Switch Module 1. Plug 1 connector and screw 1 screw and stick 1 lm tape on interrupt switch module Note: Interrupt switch cable must be pass through a dent and a aperture.And use a lm tape to x the cable in the de[...]

  • Seite 42

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-23 2-23 Assemble Fan Module 1. Screw 4 screws to assemble the fan module Note:The fan cable pass through from the aperture.[...]

  • Seite 43

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-24 2-24 Assemble Speaker Module(For X1260 only) 1. Fasten two tenons to assemble the speaker on the speaker holder Note:Avoid to press the speaker with great strenth. 2. Fasten 2 tenons(as the red square) and screw 1 (as red circle) s crew to assemb le Speaker Module . Speaker[...]

  • Seite 44

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-25 2-25 Assemble DMD Board and DMD Chip 1. Lock the lockhole by Screw Bit(-) to assemble the DMD board on the DMD chip Note:It will be locked if the Screw Bit(-) turn obverse. 2. Assemble all components of DMD parts. 3. Screw 2 screws on engine module, assemble Heat Sink and D[...]

  • Seite 45

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-26 2-26 Assemble Engine Module 1. Screw 3 screws on focus ring 2. Screw 2 screws on engine module to assemble the zoom ring and zoom ring holder(For (X1260/X1260 Refresh/ X1260K Refresh) 2. Screw 4 screws to assemble the engine module Engine Module Focus Ring For (X1260/X1260 [...]

  • Seite 46

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-27 2-27 Assemble Color Wheel Module 1. Screw 1 screw to assemble the photo sensor on color wheel module 2. Screw 2 screws to assemble color wheel module 3. Screw 1 screw to assemble the mylar Mylar[...]

  • Seite 47

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-28 2-28 Assemble Main Board Module & Back Cover Module 1. Screw 2(4 for (X1260/X1260 Refresh/ X1260K Refresh) hex screws to assemble main board module & back cover module 2. Screw 1 screw on main board module & back cover module Main Board Module Back Cover Module [...]

  • Seite 48

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-29 Main Board Module&Back Cover Module For (X1 160/X1 160 Refresh/X1 160Z/X1 160Z Refresh) For (X1260/X1260 Refresh/X1260K Refresh) 3. Screw 3 screws and 5 connectors to assemble main board module & back cover module (X1 160/X1 160 Refresh/ X1 160Z/X1 160Z Refresh) Scr[...]

  • Seite 49

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-30 Front Cover Module 2-29 Assemble Front Cover Module 1. Fasten four tenons to assemble the front cover module - First,assemble the left side of the front cover: Fasten one tenon on bottom side,then fasten the tenon on top side of the bottom cover . - Then,assemble the right [...]

  • Seite 50

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-31 Note:Avoid touch the lens when disassem- ble the front cover . 2. Screw 1 screw on front cover module (for X1260/X1260 Refresh/X1260K Refresh) 2-30 Assemb le T op Sh iel ding 1. Screw 7 screws on the top shielding T op Shielding[...]

  • Seite 51

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-32 2-31 Assemble T op Cover Module 1. Assemble the top cover module on the model 2. Screw 2 screws on the unit base T op Cover Module[...]

  • Seite 52

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2-33 2-32 Assemble Lamp Module 1. Assemble the lamp module on the model 2. Screw 2 screws on the lamp module Lamp Module 2-33 Assemble Lamp Cover Module 1. Assemble the lamp cover module 2. Screw 2 screws on the lamp cover module Lamp Cover Module[...]

  • Seite 53

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3-1 Chapter 3 T roubleshooting 3-1 LED Lighting Message Message Power LED Red Blue Input Power Plug Flash ON to OFF 100ms Standby V Power button ON V Lamp retry Quick Flashing Power off (Cooling state) Quick Flashing Power button OFF: Cooling completed; Standby Mode V Error (The[...]

  • Seite 54

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3-2 3-2 Main Procedure No Symptom Procedure 1 No Power - Ensure the Power Cord and AC Power Outlet are securely connected - Check Lamp Cover and Interrupt Switch - Ensure all connectors are securely connected and aren’t broken - Check Lamp Driver - Check L VPS - Check Main Boa[...]

  • Seite 55

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3-3 No Symptom Procedure 4 No Light On - Ensure all connectors are securely connected and aren’t bro - ken - Check Lamp Module - Check Lamp Driver - Check L VPS - Check Main Board 5 Machanical Noise - Check Color Wheel - Check Fan Module 6 Line Bar/Line Defect - Check if the M[...]

  • Seite 56

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3-4 No Symptom Procedure 9 Poor Uniformity/ Shadow - Ensure the projection screen without dirt - Ensure the projection lens is clean - Ensure the Brightness is within spec - Check rod alignment - Check Engine Module 10 Dead Pixel/Dust (Out of spec.) - Ensure the projection scree[...]

  • Seite 57

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3-5 No Symptom Procedure 14 Forgetting Password (adminstrator Pass - word) - An unique Universal Password which is printed on the Security Card. This unique password is a back door of Administrator Password which will be accepted by projec- tor anytime no matter what the Adminis[...]

  • Seite 58

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3-6 Power on (as soon as power button pressed) So(0.3s) Power on (lamp lighting failed) 2 x {So(0.1s) – Off(0.1s)} per lighting failure 12s interval for each trial lighting. Max 4 times of trial Power on (lens cap was not opened, for the model with sliding lens cover only) 2 x[...]

  • Seite 59

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-1 Chapter 4 Function T est & Alignment Procedure 4-1 T est Equipment Needed - IBM PC with SVGA/XGA resolution - DVD player with Multi-system (NTSC/P AL/SECAM), equipped “Component”, “S-Video” , “Composite” and "HDMI". - HDTV Source (480P , 720P , 1080[...]

  • Seite 60

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-2 4-4 T est Condition - Circumstance brightness: Dark room less than 5.0 lux. - Inspection distance: 1.8m~2.5m functional inspection. - Screen size: 60 inches diagonal - After repairing each X1 160/X1260/X1 160 Refresh/X1260 Refresh/X1 160Z/X1 160Z Refresh/X1260K Refresh, the [...]

  • Seite 61

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-3 4-5 T est Inspection Procedure Change parts/ Update M/B FW Color Wheel Lamp Module Engine EDID Lamp Driver V ersion Update v v v Color Wheel Index v v PC Calibration v v Video Calibration v v Reset lamp hour v OSD Reset v v EDID v Re-write Lamp Hour Usage v Reset Default Lan[...]

  • Seite 62

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-4 - If not re-adjust by the following steps: (1) Select "Frequency" function to adjust the total pixel number of pixel clock in one line period. (2) Select "Tracking" function and use right or left arrow key to adjust the value to minimize video icker . [...]

  • Seite 63

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-5 Procedure - T est equipment: video generator . - T est signal: analog 1024x768@60Hz. - T est Pattern: blue 60 Inspection item - Dark blemish check.(dirty) Criteria -The dark blemish is unacceptable when it is more than four under blue 60 pattern - Ref. below table Note: The [...]

  • Seite 64

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-6 - Ref. below table Note: The defect criteria follows TI specication. 6. Focus test Procedure - T est equipment: video generator . - T est signal: analog 1024 x 768@60Hz - T est Pattern: full screen or MEME Sony Inspection item - Focus check Criteria - From screen 1.5 M vi[...]

  • Seite 65

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-7 (the unidentied color levels on both left and right sides should not over 8 color levels.) - Grey level should not have abnormal color or heavy lines. - The PC mode functionally sure be workable include support format with frequency and auto detected functional will be wo[...]

  • Seite 66

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-8 Criteria - There should not have any lack of RGBW . The color should appear normal and sort in right order . - Color levels should be sufcient and normal. (the unidentied color levels on both left and right sides should not over 8 color levels.) - Grey level should not[...]

  • Seite 67

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-9 right sides should not over 8 color levels.) - Grey level should not have abnormal color ot heavy lines. Defect specication table Order Symptom Pattern Criteria 1 Bright pixel ( dots) Black pattern ( IRE=O) A+B=0 2 Dark pixel(dots) White pattern A+B=6 3 Unstable pixel (do[...]

  • Seite 68

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-10 - Check the sound from speakers.(Only for X1260 Refresh/X1260/X1260K Refresh) 2. S-Video Procedure - T est equipment: DVD player - Test signal: S-Video Inspection item - Video performance test Inspection Distance - 1.8M ~2.5M Criteria - Check any abnoraml color , line disto[...]

  • Seite 69

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-1 1 4-9 Optical Performance Measure Inspection Condition - Environment luminance: 5 Lux - Product must be warmed up for 3 minutes - Distances from the screen: <Max. zoom & 60 inches diagonal> 1.8 M - Screen Size: 60 inches diagonal - Reset to default before measureme[...]

  • Seite 70

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-12 3. Ful On/Full Off Contrast Procedure - Full white pattern & full black pattern - Use CL100 to measure brightness values of full white pattern P5 & full black pattern B5 ( see im - age: full white) - Follow Contrast formula to calculate contrast values. ☼ Contrast[...]

  • Seite 71

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 4-13 Keypad button - All keypad buttons must operate smoothly . General - All OSD functions must be checked for functionality . When OSD menu is displayed, there shall be no vis - ible peaking, ringing, streaking, or smearing artifacts on the screen. Factory Default - The factor[...]

  • Seite 72

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-1 Chapter 5 Firmware Upgrade 5-1 Equipment Needed Software : (DDP 2230- USB) - DLP Composer - Firmware - Library le (library le has to put in PC and set right path in step of 5-4-4 Firmware Upgrade Procedure) Hardware : - Projector - Power cord (42.53506G002) - USB Cable[...]

  • Seite 73

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-2 5-2 DLP Composer Lite Setup Procedure 1. Choose “DLP Composer Lite V7.1 Setup” Program. 2. Click “Next” buttom. 3. Read “License Agreement”. - Choose “I accept and agree to be bound by all the terms and conditions of this License Agreement”. 4. Click “Next?[...]

  • Seite 74

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-3 6. Click “Next”. 7. Click “Next”. 8. Writing system registry values. 9. Click “Finish”.[...]

  • Seite 75

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-4 5-3 USB Driver Upgrade Procedure 1. set up - Plug in Power cord to projector . - Link PC USB port and projector USB port by USB Cable. 2. Execute Program (1) “Found new hardware wiszard” will be appearred on the screen. (2) Select “Install the software automatically (R[...]

  • Seite 76

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-5 5-4 Firm Upgrade Procedure - T ake X1 160 for example,X1260/X1 160 Refresh/ X1260 Refresh/X1 160Z/X1 160Z Refresh/ X1260K Refresh is the same as X1 160 1. Set-up - Hold on “Power” and plug in power cord while holding on “Power”. - Once the power LED lights on Blue&am[...]

  • Seite 77

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-6 5. Select “EditpreferencesCommunications” - choose “USB.” Click “OK”. 6. Choose “Flash Loader”. - Click “Browse” to search the rmware le. (X1 160/X1 160 Refresh). 7. Selete the item “skip Boot Loader Area” (select 16KB). - Click “Reset Bus?[...]

  • Seite 78

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-7 9. When rmware upgrade process is nished, the unit return to stand-by status The LED power lights on and appears Red. -Unplug USB cable and power cord and replug in power cable. 10.Restart the unit and enter the service mode to check the rmware version. ( T o enter [...]

  • Seite 79

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 5-8 5-5 W aveform Download (for refresh models) (1) Hold on “Power“ button then plug in the Power Cord Note: At this moment ,Power LED ash in blue and red about 2 seconds until Power LED ash in blue only for 2 seconds, please release the power botton (2) After ashin[...]

  • Seite 80

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 6-1 Chapter 6 EDID Upgrade 6-1 EDID Introduction Extended Display Identication Data is a VESA standard data format that contains basic information about a display device and its capabilities, including vendor information, maximum image size, color characteristics, factory pre[...]

  • Seite 81

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 6-2 6-2 Equipment Needed Software - EDID Program (Generic V0.51) - EDID File *.ini Hardware - Projector - Generic Fixture (80.58704.001) for EDID Key-in (Fixture: JP3 must be closed) - Power cord(42.53506G002) - RS-232 Cable (pin to pin, F-M) - Monitor - PC - VGA cable(42.00201G[...]

  • Seite 82

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 6-3 6-4 EDID Key-In Procedure - T ake X1 160 for example,X1260 /X1 160 Refresh / X1260 Refresh/X1 160Z/X1 160Z Refresh/X1260K Refresh is the same as X1 160 1. Click on "EDID" to execute EDID program 2. Choose model (1) In the port selection bar , please choose the port[...]

  • Seite 83

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 6-4 3. Programming (1) Key in the serial number into the barcode blank space. (2) In "Write Source Select" make a check in "Analog". (3) Click "Program". 4. Change the cable to Analog - Message box appears on the screen, then click "OK". 5[...]

  • Seite 84

    X1 160 Series/x1260 Series/X1 160Z Series/X1260K Refresh Condential 6-5 6-5 Default Language Reset (for refresh models) (1) Hold on “Power“ button then plug in the Power Cord Note: At this moment ,Power LED ash in blue and red about 2 seconds until Power LED ash in blue only for 2 seconds, please release the power botton (2) After a[...]

  • Seite 85

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential I Appendix A Assy Lamp Module X1 160[...]

  • Seite 86

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential II item P/N Rev Description Parts Supply 1 52.83F12G001 A LAMP RUBBER HD72 2 61.80L06G001 A UVIR SPRING PLA TE SUS301 80L 3 52.85902G012 A LAMP CONT ACT COVER RUBBER 300C 4 85.1A326G050 A SCREW P AN HEAD MECH M2.6*5 BLACK 5 61.00061G001 A LOCK SCREW P AN MECH M3*8.5-3.5 Ni 6 51.[...]

  • Seite 87

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential III ASSY MAIN-BD MODULE X1 160 item P/N Rev Description Parts Supply 1 51.88T04G001 A IO COVER X1 160 2 61.88T16G001 A SHIELDING MAIN-BD X1 160 3 80.88T01G001 A03 PCBA MAIN BOARD FOR X1 160 4 85.005AGG075 A SCREW HEX I/O #4-40*H5*L7.5 Ni NYLOK 5 85.1A123G060 A SCREW P AN MECH M3[...]

  • Seite 88

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential IV ASSY ENGINE MODULE X1 160[...]

  • Seite 89

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential V item P/N Rev Description Parts Supply 1 51.88T09G001 A FOCUS RING X1 160 2 85.W A321G050 A SCREW P AN HEAD M1.7*5 BLACK ‘’ 3 85.1A126G060 A SCREW P AN MECH M2.6*6 Ni 4 23.88T01G001 A YO PROJECTION LENS YM09XS FOR X14 5 52.89F01G001 A PROJECTION LENS RUBBER HD65 70.88T1 1GR[...]

  • Seite 90

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential VI item P/N Rev Description Parts Supply 1 51.88N01G001 A ENGINE BOTTOM COVER PC945,X15 2 23.88N02G001 A YO MIRROR1 FOR X15 3 61.88N1 1G001 A MIRROR SPRING SUS301,X15 4 52.88N05G001 A RELA Y RUBBER,X15 5 52.85808G001 A PORON-LENS BLACK XB31 ASSY ENGINE BOTT OM MODULE X1 160[...]

  • Seite 91

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential VII ASSY HOUSING MODULE X1 160[...]

  • Seite 92

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential VIII item P/N Rev Description Parts Supply 1 51.88T10G001 A MYLAR FOR L VPS X1 160 2 51.88T14G001 A ROD DUCT X1 160 3 86.00122G015 D1 NUT HEX M2.0*0.4P L15 Ni 4 61.88T03G001 A SHIELDING BOTTOM COVER X1 160 5 51.88T02G001 A BOTTOM COVER X1 160 6 70.83U20G001 A ASSY ADJUST FOOT MO[...]

  • Seite 93

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential IX D.C. X1 160 item P/N Rev Description Parts Supply 1 75.88T03G001 A ASSY TOP COVER X1 160 2 70.88T01G001 A ASSY BOTT OM HOUSING MODULE X1 160 3 85.1A323G080 A SCREW P AN MECH M3*8 BLACK “GREEN” 4 70.88T02G001 A ASSY LAMP MODULE X1 160 5 51.88T05G001 A LAMP COVER X1 160 6 6[...]

  • Seite 94

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential X ASSY BOTT OM HOUSING MODULE X1 160[...]

  • Seite 95

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XI item P/N Rev Description Parts Supply 1 70.88T09G001 A ASSY HOUSING MODULE X1 160 2 75.88T01G001 A ASSY L VPS MA TRITEK 160W XD1 130 3 61.88T09G001 A BRKT INLET X1 160 4 85.1A123G060 A SCREW P AN MECH M3*6 NI 5 51.88T03G001 A FRONT COVER X1 160 V 70.88T12GR01 ASSY ENGINE MODU[...]

  • Seite 96

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XII ASSY LAMP DRIVER MODULE X1 160[...]

  • Seite 97

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XIII item P/N Rev Description Parts Supply 1 51.88T1 1G001 A HOLDER LAMP DRIVER X1 160 2 75.88T02G001 A ASSY OSRAM LAMP DRIVER 160W(O6 MIC) 3 85.1A123G060 A SCREW P AN MECH M3*6 NI 4 85.3A122G040 A SCREW CAP MECH M2*4 Ni 5 42.00422G001 A W .A 5P 150mm LAMP DRIVER T O MB X1 160 V[...]

  • Seite 98

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XIV ASSY F AN SHIELDING X1 160[...]

  • Seite 99

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XV item P/N Rev Description Parts Supply 1 85.1F123G260 A SCREW P AN MECH E/SF M3*26 Ni 2 49.88T01G001 A SUNON, KDE1207PKV1-A 70*70*20mm AXIAL F AN 3 43.88T01G001 A THERMAL SWITCH WITH BRACKET 4 85.1A123G060 A SCREW P AN MECH M3*6 NI 5 61.88T05G001 A SHIELDING ONE F AN X1 160 6 [...]

  • Seite 100

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XVI ASSY COLOR WHEEL MODULE X1 160[...]

  • Seite 101

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XVII item P/N Rev Description Parts Supply 1 23.88T19G001 A YO NA32R CW R90Y28G90C28W42B82 FOR X15 2 80.87Y04G001 A PCBA PHOTO SENSOR BOARD FOR PD7280 V 3 85.1A126G040 A SCREW P AN MECH M2.6*4 Ni 4 61.83628G001 A COLOR WHEEL SHOULDER SCREW ,EzPro755 5 52.83615G001 A COLOR WHEEL [...]

  • Seite 102

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XVIII ASSY MAIN-BD MODULE X1260 item P/N Rev Description Parts Supply 1 51.88T04G001 A IO COVER X1 160 2 61.88T16G001 A SHIELDING MAIN-BD X1 160 70.88T33GR01 ASSY MAIN BOARD MODULE X1 160 V 3 80.89B01G001 A03 PCBA MAIN BOARD FOR X1260 4 85.005AGG075 A SCREW HEX I/O #4-40*H5*L7.5[...]

  • Seite 103

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XIX ASSY ENGINE MODULE X1260[...]

  • Seite 104

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XX item P/N Rev Description Parts Supply 1 51.88T09G001 A FOCUS RING X1 160 V 2 85.W A321G050 A SCREW P AN HEAD M1.7*5 BLACK ‘’ 3 85.1A126G060 A SCREW P AN MECH M2.6*6 Ni 4 23.88N01G001 A YO PROJECTION LENS YM09X FOR X15 5 52.89F01G001 A PROJECTION LENS RUBBER HD65 70.88T1 1[...]

  • Seite 105

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XXI D.C. X1260 item P/N Rev Description Parts Supply 1 75.88T03G001 A ASSY T OP COVER X1 160 V 2 70.89B04G001 A ASSY BOTTOM HOUSING MODULE X1260 3 85.1A323G080 A SCREW P AN MECH M3*8 BLACK “GREEN” 4 70.88T02G001 A ASSY LAMP MODULE X1 160 5 51.88T05G001 A LAMP COVER X1 160 6 [...]

  • Seite 106

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XXII ASSY BOTT OM HOUSING MODULE X1260[...]

  • Seite 107

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XXIII item P/N Rev Description Parts Supply 1 70.88T09G001 A ASSY HOUSING MODULE X1 160 2 75.88T01G001 A ASSY L VPS MA TRITEK 160W XD1 130 V 3 61.88T09G001 A BRKT INLET X1 160 4 85.1A123G060 A SCREW P AN MECH M3*6 NI 5 75.89B01G001 A ASSY FRONT COVER X1260 6 70.89B01G001 A ASSY [...]

  • Seite 108

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential XXIV Appendix B I. Serial Number System Denition (For non-refresh models,take X1260 for example) Serial Number Format for Projector EYJ5901001 742 00000 59 10 1 2 3 4 5 1 : EYJ5901001 = Part Number excluded “dot” 2 : 742 = Week Code(ex:200 7 = 7,forty-two weeks of the yea[...]

  • Seite 109

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 2 I.Serial Number System Denition (For refresh models,take X1260 Refresh for example) Serial Number Format for Projector EYJ7201007 819 00000 59 2 1 1 2 3 4 5 1 : EYJ7201007= Part Number excluded “dot” 2 : 819 = Week Code(ex:200 8 = 8,nineteen weeks of the year = 19) 3 : [...]

  • Seite 110

    X1 160 Series/X1260 Series/X1 160Z Series/X1260K Refresh Condential 3 XXV II. PCBA Code Denition PCBA Code for Projector A B XXX XXXXXXXXX CC XXX EEEE 1 2 3 4 5 6 7 1 : ID 2 : V endor Code 3 : Firmware V ersion 4 : P/N 5 : Revision 6 : Date Code 7 : S/N[...]

  • Seite 111

    X1 160 Series/X1260 Series/X1 160Z Series Condential 80 Appendix C RS232 function command summary table (for X1260/ X1260 Refresh/X1260K Refresh) General command type (Projector “receives” commands) Code (character) Function feature 1 OKOKOKOKOK Power On 2 * 0 IR 001 Power On 3 * 0 IR 002 Power Off 4 * 0 IR 004 Keystone 5 * 0 IR 006 Mute 6 *[...]

  • Seite 112

    X1 160 Series/X1260 Series/X1 160Z Series Condential 81 29 * 0 IR 035 Query Model name 30 * 0 IR 036 Query Native display resolution 31 * 0 IR 037 Query company name 32 * 0 IR 041 Aspect ratio 1:1 33 * 0 IR 042 Keystone Up 34 * 0 IR 043 Keystone Down 35 * 0 IR 046 Zoom 36 * 0 IR 047 e-Key 37 * 0 IR 048 Color RGB (Not supply) 38 * 0 IR 049 Langua[...]