Acer X3400 Bedienungsanleitung

Acer Aspire X3400/X5400 Service Guide PRINTED IN T AIW AN[...]

ii Revision History Please refer to the table below for the updates ma de on this service guide. Date Chapter Up dates[...]

iii Copyright Copyright © 2010 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan guage or computer language, in any form or by any means, electronic, mechanical, magne tic, optical, chemi cal, manual or otherwise, without the [...]

iv Disclaimer The information in this guide is subject to ch ange without notice. Acer Incorporated makes no representations or warranties, either e xpressed or implied, with respect to the contents hereof and specifically disclaims any warrantie s of merchantability or fitness for any particular purpose. Any Acer Incorporated software described in[...]

v Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appear on screen. NOTE Gives additional informati on related to the current topic. W ARNING Alerts you to any physical risk or system damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures t[...]

vi Service Guide Coverage This Service Guide provides you with all technica l information relating to the BASIC CONFIGURA TION decided for Acer's "glo bal" product offering. T o better fit local market requirements and enhance produ ct competitiveness, your regional office MA Y have decided to extend the func tionality of a machine ([...]

vii System Tour 1 Features 1 System Compon ents 4 Front Panel 4 Rear Panel 6 Internal Components 8 System LED Indicat ors 9 System Utilities 11 CMOS Setup Utility 11 Entering CMOS setup 12 Navigating Through the Setup Utility 12 Setup Utility Menus 13 System Disassembly 27 Disassembly Requirements 27 Pre-disassembly Procedure 28 Main Unit Disassemb[...]

viii CMOS 64 Miscellaneous 64 USB eModule Error Messages 65 SMBIOS eModule Error Messages 65 CPU eModule Error Messages 65 MPS Table (Multi-proce ssor) eModule Error Message s 65 BIOS Recovery 66 Undetermined Problems 68 System Block Diagram and Board Layout 69 System Block Diagram 69 Board Layout 70 Mainboard 70 FRU (Field Replaceable Unit) List 7[...]

Chapter 1 1 Features Below is a brief summary of the computer ’s many features. NOTE: The features listed in this section is for your reference only . The exact co nfiguration of the system depends on the model purchased. Processor  One AM2+ socket  AMD Phenom II X4 805/810/820/ 900E/905E/910/925 proce ssor  AMD Phenom II X3 545/550/700E[...]

2 Chapter 1 I/O ports  Front  Five USB 2.0 ports  Headphone/speaker-out/line-out jack  Microphone-in jack  9-in-1 media card reader — CompactFlash® (T ype I an d II), CF+™ Microdrive, MultiMediaCard (MMC), Reduced-Size MultiMed iaCard (RS-MMC), Secure Digi tal™ (SD) Card, xD-Picture Card™, Me mory S tick™, Memory Stick PRO[...]

Chapter 1 3  Weight (estimate)  X3950:  8 kg  X5950:  8 kg[...]

4 Chapter 1 System Components This section is a virtual tour of the sy stem’s interior and exterior components. Front Panel X3400 No. Icon Compon ent 1 USB 2.0 ports 2 3 Front I/O cover 4 Microphone-in jack 5 Headphone/S pe aker-out/line-out jack 6 CF I/II (CompactFlash T ype I/II) slot 7 Media card reader 8 Drive bay door eject button Press to o[...]

Chapter 1 5 X5400 No. Icon Component 1 USB 2.0 ports 2 3 Front I/O cover 4 Microphone-in jack 5 Head phone/S peaker-out/line-out jack 6 CF I/II (Comp actFlash T ype I/II) slot 7 Media card reader 8 Drive bay door eject button Press to open dri ve bay door and a ccess the optical drive. 9 Optical drive bay door 10 HDD activity indicator 1 1 Power bu[...]

6 Chapter 1 Rear Panel X3400 No. Icon Component 1 Audio in or side speaker jack 2 Center speaker/subwoo fer jack 3 Gigabit LAN port (10/100/1000 Mbps) 4 USB 2.0 po rts 5 Key hole 6 Lock slot 7 Power connector 8 Power supply (Photo shows PFC po wer supply) 9 PS2 mouse port 10 PS2 keyboard port 1 1 HDMI port 12 VGA monitor port 13 eSA T A po rt 14 Re[...]

Chapter 1 7 X5400 No. Icon Component 1 Audio in or side speaker jack 2 Center speaker/subwoo fer jack 3 Gigabit LAN port (10/100/1000 Mbps) 4 USB 2.0 po rts 5 Key hole 6 Lock slot 7 Power connector 8 Power supply (Photo shows PFC po wer supply) 9 PS2 mouse port 10 PS2 keyboard port 1 1 HDMI port 12 VGA monitor port 13 eSA T A po rt 14 Rear speaker/[...]

8 Chapter 1 Internal Components No. Compon ent 1 Optical drive 2 Memory 3 Expansion card 4 Mainboard 5 Heatsink fan assembly 6 Power supply[...]

Chapter 1 9 System LED Indicators This section describ es the different system LED indicators. LED indicator Color LED status Description Power Blue On S0/S1 state Blue Blinking S3 state — Off S4/S5 state HDD activity Blue Blinking S0/S1 state LAN activity Blue Blinking S0 /S1 state LAN port net work speed LED (left) Amber On 1000 Mbps link netwo[...]

10 Chapter 1[...]

Chapter 2 11 CMOS Setup Utility CMOS setup is a hardware configurat ion program built into the system ROM, called the complementary meta l- oxide semiconductor (CMOS) Setup Utility . Since mo st systems are already properly configured and optimized, there is no need to run this util ity . Y ou will need to run this utility under the follo wing cond[...]

12 Chapter 2 Entering CMOS setup 1. T urn on the computer and the monitor . If the computer is already turned on, close all open applicatio ns, then restart the computer . 2. During POST , press Delete . If you fail to press Delete before POST is completed, you will need to restart the computer . The Setup Main menu will be displayed showing the Se[...]

Chapter 2 13 Setup Utility Menus The Setup Main menu includes the following main setup categories.  Product Information  S tandard CMOS Features  Advanced BIOS Features  Advanced Chipset Features  Integrated Peripherals  Power Management Setup  PC Health S tatus  Frequency/V oltage C ontrol  BIOS Security Features  Loa[...]

14 Chapter 2 Product Information The Product Information menu disp lays basic information about the syst em. These entries are for your reference only and are not user-configurable. Parameter Description Processor T ype T ype of processor installed on the system. Processor S peed S peed o f the processor installed on the system. System Memory T ota[...]

Chapter 2 15 Standard CMOS Features Parameter Description Option System Date Set the date following the weekday-month-day-year format. System T ime Set the system time following the hour-minute-secon d format. AHCI Port 1/2/3/4 Displays the status of auto detection of the AHCI device. Halt On Determines whether the system will stop for an error dur[...]

16 Chapter 2 Advanced BIOS Features Parameter Description Option Quick Boot Allows you to decrease the time it takes to boot the computer by shortening or skipping certain standard booting process. Enabled Disabled Quiet Boot When enabled, the BIOS splash screen displays during startup. When disabled, the diagnostic sc reen d isplays during startup[...]

Chapter 2 17 Advanced Chipset Features Parameter Description Option AMD Cool’n’Quiet Enables or disables the generation of ACPI_PPC, PPS, and PCT objects. Enable d Disabled AMD-V Enables or disables the AMD Virtual ization T echnology (VT) availability . Enable d Disabled Memory Hole Remapping Enables or disables remapping of over lapped PCI me[...]

18 Chapter 2 Integrated Peripherals Parameter Description Option Onboard SA T A Controller Enables or disables the onboard SA T A controller. Enabled Disabled Onboard SA T A Mode Select an operating mode for the onboard SA T A. AHCI Native IDE Onboard USB Controller Enables or di sables the onboard USB controller . Enabled Disabled Legacy USB Suppo[...]

Chapter 2 19 Power Management Setup Parameter Description Option ACPI Aware O/S Enables or disables the Advanced Configuration and Power Management (ACPI) function. Ye s Disabled ACPI Suspend Mode Select an ACPI state. S3 (STR) S1 (POS) Power On by RTC Alarm Enables or disables real time clock (RTC) to generate a wake event. Enabled Disabled Power [...]

20 Chapter 2 PC Health Status Parameter Description Option Smart Fan Enables or disables the sm art system fan control function. Enabled Disabled CPU T emperature System T emperature CPU Fan Speed System Fan Speed CPU Core +1.1V +3.30V +5.00V +12.0V 5VSB VBA T Smart Fan :Move Enter:Select F1:General Help F9:Optimized Defaults + :V alue // - ESC Exi[...]

Chapter 2 21 Frequency/Voltage Control Parameter Description Option S pread S pectru m Enables or disables the reduction of the mainboard’s EMI. Note: Remember to disable the S pread S pectrum feature if you are overclocking. A slight jitter can introduce a temporary boost in clock speed causing the overclock ed processor to lock up. Enabled Disa[...]

22 Chapter 2 BIOS Security Features Setting a syste m passw ord 1. Use the up/down arrow keys to select a password parameter (Change Supervisor Password or Change User Password) menu then press Enter . A password box will appear . 2. T ype a password then press Enter . The password may consist up to six al phanumeric characters (A-Z, a-z, 0-9) 3. R[...]

Chapter 2 23 Removing a system password 1. Use the up/down arrow keys to select password parameter (Change Supervisor Password or Change User Password) menu then press Enter . 2. Enter the current p assword then press Enter . 3. Press Enter twice without entering anythin g in the password fields.[...]

24 Chapter 2 Load Default Settings The Load Default Settings menu allo ws you to load the default settings for all BIOS setup parameters. Setup defaults are quite demanding in terms of resources cons umption. If you are using low-speed memory chips or other kinds of low-performance co mponents and you choose to load these settings , the system migh[...]

Chapter 2 25 Save & Exit Setup The Save & Exit Setup menu all ows you to save change s made and close the Setup Utility . CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. ► ► Standard CMOS Features ► Advanced BIOS Features ► Advanced Chipset Features ► Integrated Peripherals ► Power Management Setup Produc[...]

26 Chapter 2 Exit Without Saving The Exit Without Saving menu allows you to discard changes made and close the Setup Utility . CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. ► ► Standard CMOS Features ► Advanced BIOS Features ► Advanced Chipset Features ► Integrated Peripherals ► Power Management Setup Product I[...]

Chapter 3 27 This chapter contains step-by-step procedure s on how to disassemble the desktop computer for maintena nce and troubleshooting. Disassembly Requirements T o disassembl e the computer , you need the following tool s:  Wrist grounding strap and conductive mat for preventing electrostatic discharge  Flat-blade screwdriver  Philip[...]

28 Chapter 3 Pre-disassembly Procedure Before proceeding with the disassembly procedure, perform the steps listed below: 1. T urn off the system and all the peripherals connected to it. 2. Unplug the power cord from the power ou tlets. 3. Unplug the power cord from the system. 4. Unplug all peripheral cables from the system. 5. Place the system uni[...]

Chapter 3 29 Main Unit Disassembly X3400 MAIN UNIT FRONT BEZEL MAIN UNIT DISASSEMBL Y SIDE P ANEL PROCESSOR Ax2 HEA TSINK F AN ASSEMBL Y POWER SUPPL Y MEMORY MODULES PCI CARD FRONT I/O AND CARD READER BOARD BRACKET MAINBOARD HDD-ODD BRACKET Cx2 Dx4 Ax3, Bx1 Bx1 Bx6 F R O N T I / O B O A R D CARD READER BOARD Bx2 Bx2 TV TUNER CARD or NETWORK CARD or[...]

30 Chapter 3 X5400 Screw List Code Screw Part No. A #6-32 L5 BZN 86.00J07.B60 B M3xL5 BZN 86.1A324.5R0 C #6-32*3/16 NI 86.5A5B6.012 D #6-32 L6 NI 86.00J44.C60 MAIN UNIT FRONT BEZEL MAIN UNIT DISASSEMBL Y SIDE P ANEL PROCESSOR Ax2 HEA TSINK F AN ASSEMBL Y POWER SUPPL Y MEMORY MODULES PCI CARD FRONT I/O AND CARD READER BOARD BRACKET MAINBOARD HDD-ODD[...]

Chapter 3 31 Removing the Side Panel 1. Perform the pre-disassembly pr ocedure descri bed on page 28. 2. Remove the two screws (A) located on the rear edge of the side panel. 3. Slide the side panel toward the back of the chassis until the tabs on the cover disengage with the sl ots on the chassis. 4. Lift the side panel away from the system and pu[...]

32 Chapter 3 Removing the Front Bezel 1. Remove the side panel. Refer to the previous section for instructions. 2. Remove the front bezel according to machine model. NOTE: T o remove the X3400 model’s front bezel, you must first release the tabs securing the front bezel and disconnect the LED cable , located under the front bezel, from the mainbo[...]

Chapter 3 33 (3). Disconnect the LED cable from the mainboard, then insert the cable into the hole on the housing and remove the bezel. X3400[...]

34 Chapter 3 Removing the Heatsink Fan Assembly W ARNING: The heatsink becomes very hot when the system is on. NEVER touch the he atsink with any met al or with your hands. 1. See “Removing the Side Panel” on page 31. 2. Use a long-nosed screwdriver to loosen t he four scre ws on the heatsink fan assembly . 3. Lift the heatsink fan assembly off[...]

Chapter 3 35 Removing the Processor IMPORT AN T : Be fore removing a processor from the mainboard, make sure to create a backup file of all import ant dat a. W ARNING: The processor becomes very hot when the system is on. Allow it to cool off first before handling. 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Heatsink Fan[...]

36 Chapter 3 Removing the Optical Drive 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Front Bezel” on page 32. 3. Remove the HDD-ODD bracket. (1). Disconnect the data and power cab les from their opti cal drive connectors. (2). Remove the two screws (B) that secure the HDD-ODD bracket. Screw (Quantity) Color To r q u e P[...]

Chapter 3 37 (3). Lift the HDD-ODD bracket, then disconnect the data and power cables from their HDD connectors. 4. Remove the two screws (B) that secure the optical drive. 5. Slide the optical drive out of the bracket. Screw (Quantity) Color To r q u e Part No. #6-32*3/16 NI (3 Silver 5.7 to 6.3 kgf-cm 86. 1A324.5R0 X3400 X5400[...]

38 Chapter 3 Removing the Hard Disk Drive 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Front Bezel” on page 32. 3. See “Remove the HDD-ODD bracket.” on page 36. (1). Place the bracket on a clean, static-free work surface. (2). Remove the four screws (C) that secure the HDD module. (3). Slide the HDD out of the brack[...]

Chapter 3 39 Removing the Power Supply 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Heatsink Fan Assembly” on page 34. 3. See “Removing the Processor” on page 35. 4. See “Remove the HDD-ODD bracket.” on page 36. 5. Disconnect the power cables from their mainboard connecto rs. 6. Remove the screw (D) that secures[...]

40 Chapter 3 7. Remove the three screws (A) that secure the power supply modul e. 8. Lift the power supply module off the unit. Screw (Quantity) Color To r q u e Part No. #6-32 L5 BZN (3) Black 5.7 to 6.3 kgf-cm 86.00J07.B60 X3400 X5400 X3400 X5400[...]

Chapter 3 41 Removing the Memory Modules IMPORT AN T : Before removing any DIMM, make sure to cr eate a backup file of all important data. 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Front Bezel” on page 32. 3. See “Remove the HDD-ODD bracket.” on page 36. 4. Press the holding clips on both sides of t he DIMM slot [...]

42 Chapter 3 Removing an Expansion Card This section includes instructions on how to remove a TV tuner card and a VGA ca rd. To remove th e network card: 1. See “Removing the Side Panel” on page 31. 2. Remove the screw (A) that secu res the card to the chassis. 3. Pull the card out of its mainboard connector . Screw (Quantity) Color To r q u e [...]

Chapter 3 43 To remove th e VGA card: 1. See “Removing the Side Panel” on page 31. 2. Remove the screw (A) that secu res the card to the chassis. 3. Pull the card out of its mainboard connector . Screw (Quantity) Color To r q u e Part No. #6-32 L5 BZN (3) Black 5.7 to 6.3 kgf-cm 86.00J07.B60 NOTE: The card has been highlig hted with a yellow re[...]

44 Chapter 3 Removing the Front I/O and Card Reader Boards 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Front Bezel” on page 32. 3. See “Remove the HDD-ODD bracket.” on page 36. 4. Open the cable retention clips and disconnect the data cables from their mainboard connectors. 5. Disconnect the front I/O bo ard and ca[...]

Chapter 3 45 (1). Remove the screw (D) that secure s the bracket to the chassis. (2). Remove the bracket. 7. Remove the card reader board. (1). Remove the two screws (D) that secure the card reader board to the bracket. Screw (Quantity) Color To r q u e Part No. #6-32 L6 BZN (1) Silver 4.75 to 5.2 kgf-cm 86.00J4 4.C60 Screw (Quantity) Color To r q [...]

46 Chapter 3 (2). Pull the card reader board out of the bracket. 8. Remove the front I/O board. (1). Remove the two screws (D) that secu re the I/O board to the bracket. (2). Pull the I/O board out of the bracket. NOTE: The card has been highlig hted with a yellow rectangle as above image shows. Please detach the card and follow local regulations f[...]

Chapter 3 47 Removing the Mainboard 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Front Bezel” on page 32. 3. See “Removing the Heatsink Fan Assembly” on page 34. 4. See “Removing the Processor” on page 35. 5. See “Remove the HDD-ODD bracket.” on page 36. 6. See “Removing the Memory Modu les” on page 41. [...]

48 Chapter 3 11 . Remove the six screws (D) that secure the mainboard. 12. Lift the board off the housing. Screw (Quantity) Color To r q u e Part No. #6-32 L6 NI (6) Silver 5.7 to 6.3 kgf-cm 86.00J44.C60 NOTE: The mainboard has been highlighted with a yellow rectangle as above image shows. Please detach the mainboard and follow local regu lations f[...]

Chapter 3 49 Removing the Top Bezel NOTE: The following instruction is appl icable only to the X5400 model. 1. See “Removing the Side Panel” on page 31. 2. See “Removing the Front Bezel” on page 32. 3. Slide the bezel toward the front, then lift the bezel of f the hous ing.[...]

50 Chapter 3[...]

Chapter 4 51 This chapter provides instructions on how to troubleshoot system hardw are problems. Hardware Diagnostic Procedure IMPORT AN T : T he diagnostic tests described in this chapter ar e only intended to test Acer p roducts. Non-Acer products, prototype cards, or modified opti ons can give false errors and inval id system responses. 1. Obta[...]

52 Chapter 4 System Check Procedures Power System Check If the system will power on, skip this sect ion. Refer to System External In spection. If the system will not power on, do the fol lowing:  Check if the power cable is properly connected to the system and AC source.  Check if the voltage selector switch is set to the correct voltage sett[...]

Chapter 4 53 Checkpoints A checkpoint is either a byte or word value output to I/O port 80h. The BIOS outputs checkpoint s throughout bootblock and Power-On Self T e st (POST) to indicate t he task the system is currently executing. Checkpoint s are very useful in aiding software developers or techni cians in debugging problems that occur d uring t[...]

54 Chapter 4 Bootblock Recover y Code Checkpoints The Bootblock recovery code gets control when the BIOS determines that a BIOS recovery needs to occur because the user has forced the upda te or the BIOS checksum is corrupt . The following t able describes the type of checkpoints that may occur during th e Bootblock recovery portion of the BIOS. NO[...]

Chapter 4 55 POST Code Checkpoints The POST code checkpoints are the largest set of checkpoints during the BIOS preboot process. The following table describes the type of checkpoints th at may occur during the PO ST portion of the BIOS. NOTE: Please note that checkpoi nts may dif f er between different plat forms based on system configuration. Chec[...]

56 Chapter 4 3A Ini tialize RTC date/time. 3B T est for total memory installed in the system. Also, Check for DEL or ESC keys to limit memory test. Display to tal memory in the system. 3C Mid POST in itialization of ch ipset registers. 40 Detect different devices (Parallel ports, serial ports, and coprocessor in CPU, ... etc.) successfully installe[...]

Chapter 4 57 DIM Code Checkpoints The Device Initialization Manager (DIM) gets control at va rious times during BIOS POST to initialize di ffere nt system busses. The following table describes the ma in checkpoints where the DIM module is accessed. NOTE: Checkpoints may dif fer between different plat forms based on system configur ation. Checkpoint[...]

58 Chapter 4 Beep Codes Beep codes are used by the BIOS to indicate a seriou s or fatal error to the end user . Beep codes are used when an error occurs before the system video ha s b een initialized. Beep c odes will be generated by the system board speaker , commonly referred to as the PC speaker . AMIBIOS displays the checkpoi nts in the bottom [...]

Chapter 4 59 T roubleshooting POST BIOS Beep Codes Number of Beeps Description 1,3 Reseat the memory , or replace with known good modules. 6,7 Fatal error indicating a serious probl em with the system. Consult your system manufacturer . Before decl aring the mot herboard beyond all hope, eli minate the possibility of interference by a malfunctionin[...]

60 Chapter 4 Error Messages The following tables describes the error messages that may appear during POST . Each message is listed with a detailed description of the error . Memory Boot Message Displayed Description Gate20 Error The BIOS is unable to properly control the motherboard ’s Gate A20 function, which controls access of memory over 1 MB.[...]

Chapter 4 61 Storage Device Message Displayed Description Primary Master Hard Disk Error The IDE/A T API device c onfigured a s Primary Master could not be properly initialized by the BIOS. This message is ty pically displayed when the BIOS is trying to detect and configure IDE/A T API devices in POST . Primary Slave Hard Disk Error The IDE/A T API[...]

62 Chapter 4 Virus Related 3rd Slave Drive - A T API Incompatible The IDE/A T API device configu red as Slave in the 3rd IDE controller failed an A T API compatibility test. This mess age is typically displayed when the BIOS is trying to detect and configure IDE/A T API devices in POST . 4th Master Drive - A T API Incompatible The IDE/A T API devic[...]

Chapter 4 63 System Configuration Message Displayed Description DMA-1 Error Error initializing primary DMA controller . This is a fatal error , often indication a problem with syst em hardware. DMA-2 Error Error initializing secondary DMA control l er . This is a fatal error , often indication a problem with syst em hardware. DMA Controller Error P[...]

64 Chapter 4 CMOS Miscellaneous Message Displayed Description CMOS Date/Time Not Set The CMOS Date and/or Time are invalid. This error can be resolved by readjusting the system time in AMIBIOS Setup. CMOS Battery Low CMOS Battery is low . This message usually indicates that the CMOS b attery needs to be replaced. It could also appear whe n the user[...]

Chapter 4 65 USB eModule Error Messages SMBIOS eModule Error Messages CPU eModule Error Messages MPS Table (Multi-processor) eModule Error Messages Message Displayed Description Wa r n i n g ! Unsupported USB device found and disabled! This message is d isplayed when a non-bootable USB device i s enumerated and disabled by the BIOS. W arning! Port [...]

66 Chapter 4 BIOS Recovery 1. Prepare a USB storage device and keep it ready in hand. (1). Connect the USB storage device to a USB port on your computer . (2). Copy the target B IOS ROM f ile to a USB storage device. (3). Rename the target BIOS to “ amib oot.rom ”. (4). Unplug the USB storage device. 2. Connect the USB storage device on the USB[...]

Chapter 4 67 4. Press Delete to run the Setup Utility . 5. In the Setup Utility , select Load Default Settings , then press Enter . 6. Select Ok , then press Enter . 7. Select Save & Exit Setup , then press Enter . 8. Select Ok , then press Enter .[...]

68 Chapter 4 Undetermined Problems The diagnostic proble ms does not identify which ad apter or device failed, which in stalled devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. NOTE: V erify that all attached devices a re supported by the computer . NOTE: V erify that the power suppl y being used at[...]

Chapter 5 69 System Block Diagram System Block Diagram and Board Layout Chapter 5[...]

70 Chapter 5 Board Layout Mainboard No Code Description 1 KBMSCONN1 T op: PS2 Mouse port Bottom: PS2 Keyboard port 2 HDMI1 HDMI port 3 VGA1 VGA port 4 USBESA T A1 T op: USB ports Bottom: eSA T A port 5 USBLAN1 T op: Gigabit LAN port Bottom: USB ports 6 AUDJACK1 Audio jack 5.1 channel 7 PWR1 4 -pin A TX power connector 8 U9 Processor socket[...]

Chapter 5 71 9 DIMM 1-4 DDR3 DIMM slot 10 PWR2 24-pin A TX power connector 1 1 DEBUGH1 12 pin debug port 12 BT1 RTC battery 13 SA T A 1-4 SA T A 1-4 connectors 14 GPIOH2 GPIOH2 header 15 GPIOH1 GPIOH1 header 16 LEDH1 Power and switch LED cable connector 17 USBF4 U SB connector 18 USBF3 F ront I/O board cable connectors 19 USBF2 F ront I/O board cab[...]

72 Chapter 5[...]

Chapter 6 73 This chapter offers the FRU (Field Replaceable Unit) list in global config uratio n of the X3400/X5400 desktop computer . Refer to this chapter w hen ever ordering the parts to rep air or for RMA (Return Merchandise Authorization). NOTES:  When ordering FR U parts, check the most up-to-dat e information availa ble on your regional w[...]

74 Chapter 6 Exploded Diagram X3400 No. Part Name No. Part Name 1 PL T ACER L OGO BOXER X5 16 MAGNET 10*6*3 2 BEZEL FRONT B BOXER X550 17 PL T ASPIRE LOGO BOXER X550 3 CVR COSMETIC ART WORK BOXER X550 18 PL T ODD KNOB LOGO BOXER X550 4 CVR COSMETIC BOXER X550 19 PROTECT FILM CVR FRONT 5 CVR FRONT BOXER X550 20 PROTECT FILM DOOR ODD BOXER X550 6 DOO[...]

Chapter 6 75 X5400 No. Part Name No. Part Name 1 PL T ACER LOGO BOXER X5 17 PL T ASPIRE LOGO BOXER X550 2 BEZEL FRONT B BOXER X550 18 PL T ODD KNOB LOGO BOXER X550 3 CVR COSM ETIC ART WORK BO XER X550 19 PROTECT F ILM CVR FRON T 4 CVR COSMETIC BOXER X550 20 PROTECT FILM DOOR ODD BOXER X550 5 CVR FRONT BOXER X550 21 PROTECT FILM F-IO BOXER X550 6 DO[...]

76 Chapter 6 X3400 FRU List System model: ACER_AX3400 ABOXER II (NO:91.3C401.A0 1G ) Category Part Name Acer Part No. BOARDS FRONT IO BOARD CENTURY W/AUDIO CABLE*1&USB CABLE*2 55.SC 101.001 CARD READER 9 IN 1 8.5L AU6476 W/USB2.0 & USB CABLE W/O 1394 CR.10400.102 VGA CARD PCP ARTNER 288-1N141-B00AC NVIDIA G T315 512MB SDDR3 DVI+HDMI LP (HYN[...]

Chapter 6 77 ASSEMBL Y LOWER CASE FOR BOXER X350 TBD HDD&ODD COVER BRACKET 33.SC101.002 FRONT BEZEL W/LED SWITCH CABLE FOR X350 TBD CPU/PROCESSOR CPU AMD PHENOM II X2 545 80W 3 .0GHZ 7M TOT AL CACHE 80W CALLIST 1M L2 CACHE KC.PH202.545 DVD-RW DRIVE ODD PLDS SUPER-MUL TI DRIVE HH 16X DH-16AASH BLACK BEZEL SA T A FOR HF+WINDOWS7 KU.0160F .009 HDD[...]

78 Chapter 6 KEYBOARD KEYBOARD USB 104 KEY CHICONY KU-07603US25522V BLACK US W/O EKEY KB.USB03.192 POINTING DEVICE MOUSE USB OPT SM-9625 LITEON SM-30700-00W MS.1 1200.018 POWER SUPPL Y POWER SUPPL Y 220W EUP 1 15V AC/230V NPFC DEL T A DPS- 220UB A EUP PY .2200F .006 SCREWS SCREW I NO6-32 L5 BZN 86.00J07.B60 SCREW P AN #6-32 L6 NI BOXER WZS 86.00J44[...]

Chapter 6 79 X5400 FRU List System model:ACER_AX5400 ABOXER II (NO: 91.3 C401.A01) Category Part Name Acer Part No. BOARDS FRONT IO BOARD CENTURY W/AUDIO CABLE*1&USB CABLE*2 55.SC101.001 CARD READER 9 IN 1 8.5L AU6476 W/USB2.0 & USB CABLE W/O 1394 CR.10400.102 VGA CARD PCP ARTNER 288-1N141-A00AC NVIDIA G T315 512MB SDDR3 DVI+HDMI A TX (SAMS[...]

80 Chapter 6 ASSEMBL Y LOWER CASE FOR BOXER X550 TBD ASSEMBL Y TOP COVER W/LED SWITCH CABLE FO R BOXER X550 TBD HDD&ODD COVER BRACKET 33.SC101.002 FRONT BEZEL W/LED SWITCH CABLE FOR X550 TBD CPU/PROCESSOR CPU AMD A THLON II X2 80W 3.0GHZ 7M TOT AL CACHE 80W CALLIST 1M L2 CACHE KC.PH202.545 DVD-RW DRIVE ODD HLDS SUPER-MUL TI DRIVE HH 16X GH41N B[...]

Chapter 6 81 KEYBOARD KEYBOARD USB 104 KEY LITE-ON SK-9625S SG-30703-XUW BLACK US WITH NEW COLOR AC-MT -018 KB.USB0B.082 POWER SUPPL Y POWER SUPPL Y 220W PFC 230V DEL T A DPS-220UB-1 A EUP PY .2200F .006 SCREWS SCREW I NO6-32 L5 BZN 86.00J07.B60 SCREW P AN #6-32 L6 NI BOXER WZS 86.00J44.C60 SCREW #6-32 L5 P AN NI 86.00J90.B60 SCREW NO4-40 L6.5 P AN[...]

82 Chapter 6[...]

Appendix A 83 This section provides technica l specifications for the system. Processor System Board Major Ch ip s AMD Phenom II X4 Item Specificati on Model number 805 810 820 900E 905E 910 925 Frequency (GHz) 2.5 2.6 2 .8 2.4 2.5 2.6 2.8 T o t a l L 2 c a c h e ( M B ) 22 2222 2 L 3 c a c h e ( M B ) 4 44666 6 Socket AM3 Thermal desi gn power (W)[...]

84 Appendix A System Memory System BIOS Hard Disk Drive VGA Interface Item Sp ecification Memory type DDR3-667/800/1 066/1333 unb uffered DIMM Module name PC3-8500/10600 Organization ECC DIMM sockets Four DIMM size 1 GB or 2 GB Minimum memory 1 GB Maximum memory 8 GB Nanya NT1GC64B88A0NF-CG NT2GC64B8HA0NF-CG Samsung M378B2873EH1-CH9 M378B5673DZ1-CH[...]

Appendix A 85 PCI Interface Network Interface SA T A Interface Audio Interface Keyboard and Input Devices Item Specification PCI controller nVIDIA GeForce 8200 (MCP78PV) Number of slots PCI Express x 1 slot PCI Express x16 slot Item Specification LAN controller nVIDIA GeForce 8200 (MCP78 PV) + Marvell 88E1 1 16 Intel WG82567V Gigabit NIC Supports L[...]

86 Appendix A Optical Drive BD Combo Module Item Sp ecification V endor HLDS Model name BH 30N CH20N Drive type BD-R ewriter BD-Combo Write S peed BD-R (SL/DL) 2x, 4x CL V , 6x PCA V / 2 x , 4 x C L V , 6 x P C AV B D - R ( S L L t o H ) 2 x C LV B D - R E ( S L / D L ) 2 x / 2 x C L V DVD-R 2x, 4x CL V , 8x ZCL V , 8x, 12x P C AV , 1 6 x C AV DVD-[...]

87 Appendix A Super Multi Item Specification V endor HLDS PLDS Model Name GH-41N DH-16AASH Drive T ype Super Multi Super Multi Write S peed CD-R: 4x, 8x, 16x CL V , 24x, 32x, 40x PCA V CD-RW : 4x, 10x,16x CL V , 24x, 32x ZCL V (High S p eed: 10x, Ultra S peed: 16x, 24x, US Plus: 16x, 24x, 32x) DVD+R:2.4x, 4x, 6x CL V , 8x,12x ZCL V , 8x, 12x PCA V [...]

Appendix A 88 Buffer Size 2 MB 2 MB Interface T ype Serial A T A Serial A T A Super Multi Item Specification[...]