Acnodes PC 5170 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192

Zur Seite of

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Acnodes PC 5170 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Acnodes PC 5170, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Acnodes PC 5170 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Acnodes PC 5170. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Acnodes PC 5170 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Acnodes PC 5170
- Den Namen des Produzenten und das Produktionsjahr des Geräts Acnodes PC 5170
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Acnodes PC 5170
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Acnodes PC 5170 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Acnodes PC 5170 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Acnodes finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Acnodes PC 5170 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Acnodes PC 5170, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Acnodes PC 5170 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    PC 5170 17-inch touch PANEL PC USER MANUAL[...]

  • Seite 2

    Page 1[...]

  • Seite 3

    PC 5170 Flat Panel PC REVISION HIST OR Y Ti tl e PC 5170 Flat Panel PC User M anual Rev i sion Num b er Descri ption Dat e o f I s su e 1.0 Initial release September 2 006 1.1 Appendix A – ACNODES Panel PC product line added W all mounting pro cedure update d LCD dimensi ons corrected Dece mber 2 0 06 ABOUT THIS MANUAL This docu ment covers the d[...]

  • Seite 4

    PC 5170 Flat Panel PC SAFETY PRECAUTIO NS 1 Prior to installing, moving, and modifying the pane l PC, make sure the power is turned of f and the power cord is di sconnecte d. 2 Do no t a pp ly v ol ta ge lev el s that e xceed the sp ecified voltage rang e. Doing so will cause fire or an el ectrical shock. 3 Electri c sho cks can oc cur i f the p an[...]

  • Seite 5

    PC 5170 Flat Panel PC 5 The p anel PC is actively co oled. In no circum sta nces should the p an el PC operate with the opening s obstructe d by fo rei gn o bj ec ts. Howe ve r , t he ambient temperature of the installatio n sit e sh ould be ob serv ed a nd co ntro lled to avoid overheating the panel PC. 6 Condens ation migh t form in side the pane[...]

  • Seite 6

    PC 5170 Flat Panel PC 1 Except for the properly inst alled front LC D panel, neve r spr ay or squir t liq uids di re ct ly o nt o an y c omp uter c omp o ne nt. If the device need s to be cleane d, please rub it with a piece o f dry and soft cl ot h or a sl ightl y m ois te ned c lot h wi th the exterior c asing. 2 The interi or of the p anel PC do[...]

  • Seite 7

    PC 5170 Flat Panel PC 5 Cotton swab s - Cotton swaps m oistene d with rubbin g alcohol or water a re exc ell ent too ls fo r wipi ng har d to r each areas in the keyboard, mouse, and other location s. 6 Foam swabs - Whenever possibl e it is better to use lint free swabs su ch a s foam swabs. ESD PRECAUTIONS Observe all convention al anti-ESD method[...]

  • Seite 8

    PC 5170 Flat Panel PC CONVENTI ONS USE D IN THIS MANUAL WA R N I N G ! W arnings ap pear where ov erloo ked det ails m ay cau se damage to the equi pment or result in personal i njury . W arnings sho uld be take n seri ously . W arnings are easy to recogni ze. The word “wa rning” is writt en as “ WAR N I N G ,” both capitalized an d bold an[...]

  • Seite 9

    PC 5170 Flat Panel PC T able of Content s 1 INTRODUCTION................................................................................................... 19 1.1 PC 5170 F LA T P ANEL PC O VER VIEW .................................................................... 20 1.1.1 PC 5170 Model V ariation.................................................[...]

  • Seite 10

    PC 5170 Flat Panel PC 2.5 P ERIPHERAL D EVICE I NTERF ACES , C ONNECTORS , AND S LOTS ................................. 38 2.5.1 OEM Options ................................................................................................... 38 2.5.2 Internal Slots .....................................................................................[...]

  • Seite 11

    PC 5170 Flat Panel PC 3.8.6 Serial Port Connection .................................................................................... 67 3.8.7 Audio Port Connection..................................................................................... 67 4 SYSTEM MAINTENANCE ..........................................................................[...]

  • Seite 12

    PC 5170 Flat Panel PC 5.3.8 Remote Access Configuration .........................................................................1 10 5.3.9 USB Con figura tion..........................................................................................1 12 5.4 PCI/P N P ..................................................................................[...]

  • Seite 13

    Page 1 1[...]

  • Seite 14

    PC 5170 Flat Panel PC B.1 1 F AN C ONNECTOR ................................................................................................. 162 B.12 I NVER TER (LCD B ACKLIGHT ) C ONNECTOR ........................................................ 163 B.13 LCD P ANEL LV D S I NTERF ACE C ONNECTOR ....................................................[...]

  • Seite 15

    PC 5170 Flat Panel PC List of Figures Figure 1-1: PC 5170 Fr ont View ................. ............. .............. ............................ .......21 Figure 1-2: PC 5170 Rear View ...... ................ .............. .............. ............... .............. .22 Fi gur e 1- 3: PC 5170 Top View .... ............. .............. .........[...]

  • Seite 16

    PC 5170 Flat Panel PC Figure 4-2: CD Driv e Re tenti on Screws .................. ...... ..... ........ ...... ........ ...... ..... ......73 Figure 4-3: Internal Elevated Platform Rete ntion Screws ........... ....................... .....73 Figure 4-4: Elevated Platform Ret ention S cre ws (Top Panel) ........................ ........ 73 Figure 4[...]

  • Seite 17

    PC 5170 Flat Panel PC List of T a bles Ta ble 1 -1: PC 5170 Model Variation ............. ............................ ............. ..................20 Ta ble 1- 2: PC 5170 Specifica tions .... ........ ......... ........ ......... ......... ....... .......... ........ ..28 Table 1-3: Motherboard Specificati ons ............... ........ ........ [...]

  • Seite 18

    PC 5170 Flat Panel PC List of BIOS Menus BIOS Menu 1: Main ............. ..... ... ..... ... ... ..... ... ...... .. ... ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..84 BIOS Menu 2: Advanced............ ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..... ... ... ..... ... ...... .. ... .... 86 BIO S Menu 3 : CPU C onfig[...]

  • Seite 19

    PC 5170 Flat Panel PC Glossary AC ’97 Audio Codec 97 ACPI Advanced Co nfiguration and Power Interfac e APM Advanced Power Management ARMD ATAPI Removable Media Device ASKIR Shift Keyed I nfrared ATA Advanc ed Tech nology At tachment s BIOS B asic Input/Output System CFII Compact Flash Type 2 CM OS Complementar y Metal Oxide Semicondu ctor CPU Cen[...]

  • Seite 20

    PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 18 ACNODES ® Corp.[...]

  • Seite 21

    PC 5170 Flat Panel PC Chapter 1 1 Introduction Page 19[...]

  • Seite 22

    PC 5170 Flat Panel PC 1.1 PC 5170 Flat Panel PC Overview The PC 5170 flat panel PC is a flexible, multi- func tiona l fla t p anel PC that can be applied in diverse operation al envi ronment s and implemen ted in multi-faceted a pplicati ons. The PC 5170 comes fully kitt ed with a hi gh-pe rfo rm an ce mo th er boa rd , C PU , po we r s upply unit [...]

  • Seite 23

    PC 5170 Flat Panel PC 15 Hi gh br ig htnes s 17 ” i ndus tri al g ra de panel 16 Fully I/O function support: o 6 x COM (1 for Touch S creen) o 6 x USB 2.0 ports o 1 x PCI slot o 1 x CF so cket 17 Dual 10 /100/Gigabit Ethernet supported 18 RoHS co mpli ant 1.2 PC 5170 External Overview 1.2.1 General Description The PC 5170 flat p anel P C is compr[...]

  • Seite 24

    PC 5170 Flat Panel PC 1.2.3 Rear Panel The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-2 . Fi gu re 1 -2 : PC 5170 Re ar V iew Page 22 ACNODES ® Corp.[...]

  • Seite 25

    PC 5170 Flat Panel PC 1.2.4 Top Panel The top pane l has two fan vents and three re tention screws for secu ring the d rive bay bracket. The retention scre ws a re circled in Figure 1-3 below . Fi gur e 1 -3: PC 5170 Top V iew 1.2.5 PC 5170 Bottom Panel The bottom panel shown in Figure 1-4 has the following interfaces : 19 1 x Power input conn ecto[...]

  • Seite 26

    PC 5170 Flat Panel PC Figure 1-4: Bottom View 1.2.6 Left Panel The left side panel ha s two fan vent s and four retention screws for se curing the two internal fans. The retention screws are circle d in Figure 1-5 . Figure 1-5: Left View 1.2.7 Right Panel The right sid e panel provi des ac cess to a slim type CD drive ba y and a FDD drive bay shown[...]

  • Seite 27

    PC 5170 Flat Panel PC Figure 1-6: Left View 1.2.8 Frame An aluminum frame su rrou nds th e 17” T FT LC D screen. The b ack of the aluminum frame has sixteen mounting screw holes. Th ese scre ws are ci rcled in Figure 1-7 . Figure 1-7: Frame Rear View Page 25[...]

  • Seite 28

    PC 5170 Flat Panel PC 1.3 PC 5170 Inte rnal Overview The PC 5170 internal components are configured in a three level format. An elevated platform on t he ri ght si de of t he chassi s supp ort s a HDD, a CD d rive and a F DD. On the secon d level, below the elevated platfo rm, are a mo therbo ard an d a PSU module. The motherboard and the PSU modul[...]

  • Seite 29

    PC 5170 Flat Panel PC SPECIFICA TION DET A IL Front Panel Aluminum Front Panel meet s IP65 standard Chassis Heavy-duty Steel LCD Panel 17” High lumi nance TFT LCD Resolution 1280 x 1024 (SXGA) Brightness 300 cd/m2 Contras t Rati o 500:1 LCD MT BF 50,000 hrs Backlight M TBF 50,000 hrs V ie w i ng Angle (H-V ) 140/130 T ouch Scre en Optional 5-wi r[...]

  • Seite 30

    PC 5170 Flat Panel PC SPECIFICA TION DET A IL Vib r a t io n 5 - 17Hz, 0.1” double ampli t ude displace ment. 17 - 640Hz, 1.5G accelerat ion, peak to peak. Shock 10G Accelera tion, peak to peak (11m s) Dimensions 452(W) x 356(H) x 110(D) mm Net/Gro ss W eight 8/12 Kg Environment RoHS Com pli ant Ta ble 1- 2: PC 5170 Spec if ica ti ons 1.4.3 PC 51[...]

  • Seite 31

    PC 5170 Flat Panel PC SPECIFICA TION DET A IL COM 1 x RS-232/422/485 p ort 5 x RS-232 port s (1 for optional touch screen ) USB 2.0 6 x USB 2.0 ports Driv e Interfaces 2 x SA T A drive connectors LPT 2 x A T A 100 channels KB/ MS 2 x PS/2 connector IrDA 1 x IrDA interface Table 1-3: Mother board Specificatio ns 1.4.4 Flat Panel Screen The PC 517 0 [...]

  • Seite 32

    PC 5170 Flat Panel PC SPECIFICA TION DET A ILS Respon se T i me (ms) (at 25°C) 8 Power Consumption (W) 25.8 Interface 2ch L VDS Supply V oltage (V) 5 Backlight 4 CCFL Outline Dimensions (m m) 358.5 x 296.5 x 17.0 Wei ght (g) 1900 Table 1-4: 17” TFT LCD Monitor Spec ifications 1.4.5 Pow er Supply The PC 5170 flat panel PC comes with a n 1 80W AC-[...]

  • Seite 33

    PC 5170 Flat Panel PC The specifi c a tions for the PSU module are shown in ( T able 1-5 ). V oltage AC90V ~ 264V AC Full Range Frequency 47 ~ 63 Hz INPUT Input Curren t 4A(RMS)@1 15V AC 2A(RMS)@ 2 30V AC Inrush Curre nt 50A Max for 1 15V AC 80A Max for 230V AC V olt age (V ) +3.3V +5V +12V -12V 5VSB Min. Load (A) 0.3A 0.3A 1.5A 0A 0A OUTPUT Max. L[...]

  • Seite 34

    PC 5170 Flat Panel PC 1.5 Dimensions The dimensions of the PC 5170 flat panel PC are shown in Fig ure 1-9 below . Figure 1-9: Dimensions (units in mm) Page 32 ACNODES ® Corp.[...]

  • Seite 35

    PC 5170 Flat Panel PC Chapter 2 2 EMBEDD ED Motherboard[...]

  • Seite 36

    Page 33[...]

  • Seite 37

    PC 5170 Flat Panel PC 2.1 Introducti on The PC 5170 flat screen PC con tain s a EMBEDDED motherboa rd. The mothe r b oard i s the heart of any comp uter a nd is re sponsi ble for transmitting, recei ving and p rocessi ng dat a as well as d riv ing the dif ferent on-boa rd device s. Thi s chapte r gives a b rief intro duction to the EMBEDDED motherb[...]

  • Seite 38

    PC 5170 Flat Panel PC quality and full surround sound capability . 42 LAN Conne ct Interface (LCI) provid e s network solution s for 10/100 Mbp s Ethernet and 10/100 Mbps Etherne t with LAN manageability 43 Dual Ultra A T A/100 controll ers 44 Error Co rrecti ng Cod e (ECC) suppor t in integrated graphi cs mode only 45 The Intel Application Ac cele[...]

  • Seite 39

    PC 5170 Flat Panel PC o RAID Level 0 Support (ICH5R Only) 51 Integra ted IDE Controller o Supports “Na tive Mode ” Registe r and In terrupts o Independent timing of up to 4 drives o Ultra ATA/100/66/33, BMIDE and PIO modes o Tri-state modes to ena ble swap bay 52 Interrupt Cont roller o Supports up t o 8 PCI interrupt pins o Supports PCI 2.3 Me[...]

  • Seite 40

    PC 5170 Flat Panel PC 59 Zone Rendering 2 T echnolog y : Enhances the performance of zone renderi ng by using larger zone s and new co m ma nd s th at im pro ve g ra ph ic s pipeline ef fi ciency . 60 D y namic V ideo Memor y T echnology v2.0 : I ncre ase s tot al syste m performan ce by optimizing the efficienc y o f AGP dynam ic vi deo me mor y b[...]

  • Seite 41

    PC 5170 Flat Panel PC o Hardware mo tion compen sation sup port for DVD pl ayback o 4x2 overlay filter o 350 MHz DA C frequen cy o Maximum DVO pixel rat e of up to 330MP/s o Flat panel monitors and TV-out support via AGP Digital Displa y (ADD) cards o 350 MHz DA C for 1800x 1440 @ 8 5Hz max CRT re solution or 2048x1536 @60Hz max FP resolution o Syn[...]

  • Seite 42

    PC 5170 Flat Panel PC 69 1 x A TX power conne ctor 70 2 x Audio connectors 71 1 x DIO connector 72 3 x Fan connectors 73 1 x FDD connector 74 2 x IDE device connectors 75 1 x IrDA conn ector 76 1 x Keyboard conn ecto r 77 1 x PS/2 mouse connecto r 78 1 x LCD backlight conne ctor 79 1 x L VDS interface con nector 80 1 x Multi panel connec tor 81 1 x[...]

  • Seite 43

    PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 40 ACNODES ® Corp.[...]

  • Seite 44

    PC 5170 Flat Panel PC Chapter 3 3 Installation and Configuration Page 41[...]

  • Seite 45

    PC 5170 Flat Panel PC 3.1 Installation Precautions When inst alling the PC 5170, please follow the p recautio ns liste d below: 1 Power turned off : Wh en inst alli ng the PC 5170 make sure the po wer is of f. Failing to turn off the power may caus e severe injury to the body and/or damage to the system. 2 Certified Engineers : Only certified engin[...]

  • Seite 46

    PC 5170 Flat Panel PC 3.3 Installation and Configuration Steps The following inst allatio n st eps mu st be followed. Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Unpac k t he PC 5170. Set the jumpe r settings. Install HDD, FDD a nd CD drive. Mount the PC 5170 flat panel PC. Connect peripheral devices to the bottom panel of the PC 5170. Configur[...]

  • Seite 47

    PC 5170 Flat Panel PC 3.4.1 Packing List The PC 5170 flat panel PC is shipped with the following components: 107 1 x Carton 108 1 x Power cord 109 1 x Screw kit 110 1 x HDD IDE cabl e (44 pi n + 2 x 40 pin) 111 1 x HDD IDE cabl e (44 pi n + 40 pin ) 112 1 x HDD SA T A cable 113 1 x Driver CD (including u ser manual) 114 1 x CPU cooler 115 1 x CD-RO[...]

  • Seite 48

    PC 5170 Flat Panel PC NOTE: A jumper is a m et al bridge t hat is used to close an ele c trical ci rcuit. It consist s of two metal pins and a s m all m etal clip (often protected by a plastic cover) that slides over the pins to connect them. T o CLOSE/SHORT a jum per means connecting the pins o f the jumper with the plastic clip and to OPEN a jump[...]

  • Seite 49

    PC 5170 Flat Panel PC Figure 3-1: Back Cover Retent ion Scre ws 3.5.2 CF Card Setup (JP12) The CF Card Setup jumpe r configu re s a CF card as ei ther the slave or the master . JP12 DESCRIPTIO N Open Slave (D efault ) Close Master Table 3-2: CF Card Setup Jumper Settings Page 46 ACNODES ® Corp.[...]

  • Seite 50

    PC 5170 Flat Panel PC 3.5.3 Clear CMOS Setup (JP1) If the motherb oard fails to boot due to improper B IOS sett ings , use this jump er to c lear the CMOS data and re set the system BIOS information . To do this, use the jum per cap to close pin s 2 and 3 for a few second s then rein stall the jumper clip back to pins 1 and 2. If the “CMOS Settin[...]

  • Seite 51

    PC 5170 Flat Panel PC 3.5.5 COM port RI and Voltage Sel ection Use JP7 and JP9 to set pin 9 of COM1 as signal RI or voltage source. JP9 DESCRIPTION 2-3 clos ed COM1 RI PIN Use RI 1-2 clos ed COM1 RI PIN U se Vo ltag e Table 3-5: COM1 RI and Voltage Selection Jumper JP7 DESCRIPTION 2-3 clos ed COM1 R I PIN U se Vo ltag e +12V 1-2 clos ed COM1 R I PI[...]

  • Seite 52

    PC 5170 Flat Panel PC JP6 DESCRIPTION 2-3 clos ed COM2 RI PIN Use Voltag e +12V 1-2 clos ed COM2 R I PIN U se Vo ltag e +5V Table 3-8: COM2 RI Volta ge Selection Jumper Use JP13 an d JP15 to set pin 9 of COM 3 as signal RI or volt age so urce. JP15 DESCRIPTIO N 2-3 clos ed COM3 RI PIN Use RI 1-2 clos ed COM3 RI PIN U se Vo ltag e Table 3-9: COM3 RI[...]

  • Seite 53

    PC 5170 Flat Panel PC 3.5.6 CPU Voltage Setting (S3) T wo dif fere nt types of CPU can be used on the EMBE DDED mothe rboard. One i s Pentium 4 CPU and the other is Pentium4-M CP U. Use the CPU volta ge setting jump er (S3) to configure th e power of CP U. When u sin g P entium 4 CPU, ple ase open S3 jum per . CPU VI D a ut oma ti call y co nfi gu [...]

  • Seite 54

    PC 5170 Flat Panel PC JP2 DESCRIPTION 1-2 clos ed +3.3V (default) 3-4 clos ed +5V 5-6 clos ed +12V Table 3-15: LCD Voltage Setup Ju mper Settings 3.6 HDD, FDD and CD Drive Installation 3.6.1 HDD Installation T o install a HDD, plea se follow the steps below: Step 1: Step 2: Remove the back cover ( Se ct io n 3. 5.1 ). The HDD bracket is attached to[...]

  • Seite 55

    PC 5170 Flat Panel PC Insert the four retention screws into the base of the HDD bracket. Step 5: Connect the IDE/SA T A cable from the IDE/SA T A connector on the motherboard to the rear of HDD. Step 0: 3.6.2 FDD Installatio n T o install the FDD, plea se follow the step s belo w: Step 1: Step 2: Step 3: Remove the back cover ( Se ct io n 3. 5.1 ).[...]

  • Seite 56

    PC 5170 Flat Panel PC Figure 3-4: FDD Adap ter and FDD Br a cket Ins t allation Step 5: Step 6: Step 7: At tach t he FDD b ra cket to the FDD . T o do this, align the four retent ion scre w holes in the F DD b rac ket with the retenti on screw hol es on th e si des of the F DD. Insert four retention screws into the bracket of the FDD. Reinst all th[...]

  • Seite 57

    PC 5170 Flat Panel PC Figure 3-5: CD Drive Adapter Installation Step 4: Step 5: Remove the back cover of the PC 5170 (see Section 3.5.1 ). The CD drive blan k plate a ssembly is att a ched to the re ar p anel by t wo retention scre ws ( Figure 3-6 ). Figure 3-6: CD Drive Retention Screws Remove the two rete ntion scre ws from the bottom p anel and [...]

  • Seite 58

    PC 5170 Flat Panel PC Figure 3-7: Remov e CD Driv e Step 6: The CD drive blank plate assembly consists of a blan k plate and two brackets that attach th e assembly to the cha ssis. The two b ra cket s each h ave two screws that attach them to the bla nk plate. Remove the four screws that attach the bracket s to the blank plate. Figure 3-8 shows the[...]

  • Seite 59

    PC 5170 Flat Panel PC Figure 3-9: CD Driv e Blank Plate As se mbly WA R N I N G ! The two scre ws (bl ack M2 *3) sho wn in the lef t image of Figure 3-9 are dif ferent from the two screws (silve r M2*2) sho wn in the right. Please secure th e co rrect screws i nto the CD drive a ccordi ng to the im ages sh own in the Figure 3-9 . Step 8: Step 9: Sl[...]

  • Seite 60

    PC 5170 Flat Panel PC Figure 3-10: CD Drive Installed Page 57[...]

  • Seite 61

    PC 5170 Flat Panel PC 3.7 Mounting the System WA R N I N G ! When m ounting the PC 5170 flat pan el PC onto an arm, wall or into a pan el, it is advisa ble to have m ore than one person h elp with th e install ation to prevent acci dental dam ag e to the p ane l and avoid p ersonal injury . The four method s of moun ting the PC 5170 are: 125 W all [...]

  • Seite 62

    PC 5170 Flat Panel PC Figure 3-11: Wall-moun ti ng Bracket Step 6: Step 7: Step 8: Insert the four monitor mou nting screws provided in the wall mou nting kit into the four screw ho les on the real p anel of the monitor and tighten until the scre w shank i s secured ag ain st the rear p a nel (see Figure 3-12 ). Align the mounting screws on the mon[...]

  • Seite 63

    PC 5170 Flat Panel PC Figure 3-12: Mount the Chassis Step 9: Secure the panel PC with the wall-mounting kit. T o do this, stick the protective cush ion to the wall-mounting k it first. Then, put the wall-mounting kit on the top panel of the panel PC. Carefully mark t he location of the wall-mounting kit screw holes on the wall. Drill a pilo t hole [...]

  • Seite 64

    PC 5170 Flat Panel PC Figure 3-13: Secure the Chassis 3.7.2 Panel Mounting T o mount the PC 5170 flat panel PC into a pa nel, please follow the steps below . NOTE: The m axim um panel thickness should be no m ore than 6m m. Step 1: Step 2: Select the position on the panel to moun t the PC 5170. Cut ou t a s e cti on of t he p anel th at c or re spo[...]

  • Seite 65

    PC 5170 Flat Panel PC Figure 3-14: Cut the Panel Step 3: Step 4: Slide the PC 5170 through the hole unti l the metal frame is flush agains t the pane l. Insert the pan el mounting clamps into the pre -forme d holes alon g the edg es of the PC 5170, behind the metal fram e. Refer to the mounting kit p a cki ng list for the require d numbe r of mount[...]

  • Seite 66

    PC 5170 Flat Panel PC Figure 3-16: Tighten the Panel Mounting Clamp Screw s 3.7.3 Arm Mounting The PC 5170 is VESA (V ideo Elect ronics S tandar ds Ass oci at io n) c ompl i ant and can be mounted on an a rm with a 100m m interface p ad. T o mount the PC 5170 on an a rm, please follow the step s bel ow . Step 1: The arm is a separately purcha sed i[...]

  • Seite 67

    PC 5170 Flat Panel PC PC 5170 flat panel PC. The PC 5170 flat panel PC arm moun t retention screw hole s are shown in F i gure 3-1 7 . Figure 3-17: Arm Mou nt Retention Scre w Holes Step 4: Secure the PC 5170 to the interfa ce pa d by insertin g four retention screws through the mounting a rm interface pad and into the PC 5170 flat panel PC. Step 0[...]

  • Seite 68

    PC 5170 Flat Panel PC Step 3: Step 4: Mak e sure the re ten tion scre w holes at the rear of the PC 5170 frame are aligned with the retentio n scre w hol es in the cabi net/rack b r a cket. Secure the cabinet/rack bracket to the monitor by inserting and tightening the retention screws ( Figur e 3 - 18 ). Figure 3-18: Secure the Rack/Cabinet Brac ke[...]

  • Seite 69

    PC 5170 Flat Panel PC Figure 3-19: Install into a Rack/Cabinet Step 6: Once the PC 5170 flat panel PC with the attached rack/cabinet br acket has been properly inserted into the rack/cabinet, secure the front of the rack/cabine t bracket to the front of the rack/cabinet ( Figure 3-19 ). Step 0: 3.8 External Peripheral Interface Connectors 3.8.1 LCD[...]

  • Seite 70

    PC 5170 Flat Panel PC 3.8.2 Ethernet Connection The two external p eripher al interface RJ-4 5 conn ect ors ca n be connecte d to an extern al LAN to provide Internet connec tivity to the flat panel PC. 3.8.3 USB Conn ection The external periphe ral interface USB c onnectors provide easy and quick acce ss to external USB devices. The external perip[...]

  • Seite 71

    PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 68 ACNODES ® Corp.[...]

  • Seite 72

    PC 5170 Flat Panel PC Chapter 4 4 System Maintenance Page 69[...]

  • Seite 73

    PC 5170 Flat Panel PC 4.1 System Maintenance Introduction The following system com ponent s may require mainte nance. 129 Motherboa r d 130 DIMM module 131 PSU mod ule 132 Cooli ng fan s If these com pone nt s fail, they must b e repl ac ed. Please cont a ct the sy stem resell er or vendor to purchase replacemen t p arts. Replacement instructions f[...]

  • Seite 74

    PC 5170 Flat Panel PC W ARNING! PLEASE T AKE ANTIST A TIC PREC AUTIONS WHEN WORKING WITH THE INTERNAL COM PONENTS. The interior of the PC 5170 contains very sensitive electronic componen ts. These co mponent s are easil y dam aged by electrost atic discharge (ESD). Before workin g with the intern al com ponent s, m ake sure all anti-stat ic p recau[...]

  • Seite 75

    PC 5170 Flat Panel PC Figure 4-1: Rear Cover Retent ion Screws (Real Panel) 4.3.2 Detaching the Elevated Platform Please read t he warnings at the beginni ng of Section 4.3 before attempting to access a ny PC 5170 int ernal com ponents. The elevated platform su pports the FDD, CD drive and HDD. Back cover removal is discussed in Section 4.3.1 . To [...]

  • Seite 76

    PC 5170 Flat Panel PC Figure 4-2: CD Drive Retention Screws Step 3: The elevated platform i s secured to the chassi s with fo urteen retenti on screws, four on the internal pl at form ( Figure 4-3 ), three on the top p anel ( Fi gure 4-4 ), three on the right pa nel ( Figure 4- 5 ), two on the bottom panel ( Figure 4-6 ) and two on the PCI rise r c[...]

  • Seite 77

    PC 5170 Flat Panel PC Figure 4-5: Ele v ated Platform Retention Screw s (Right Panel) Figure 4-6: Ele v ated Platform Retention Screw s (Bottom Panel) Figure 4-7: Ele v ated Platform Retention Screws (PCI Riser Card) 4.4 DIMM Replacement Please read t he warnings at the beginni ng of Section 4.3 before attempting to access a ny PC 5170 int ernal co[...]

  • Seite 78

    PC 5170 Flat Panel PC Step 2: Loc ate t he DIM M socke t on the motherboard near the right of the chassis. Push down on the white levers of the socket until the DIMM module is dislodged from the socket ( Figure 4-8 ). Figure 4-8: DIMM Socket Clip Locations Step 3: Slowly slide t he ne w DIM M module al ong the plastic guide s at bot h ends of th e [...]

  • Seite 79

    PC 5170 Flat Panel PC Figure 4-9: PS U Moth erb oard Connec tors The PSU module i s secured to the PC 5170 flat panel PC with six retention scre ws, two conne ct to the bottom pa nel ( Figure 4-10 ), two con ne ct to the internal PSU bra cket ( Figure 4-12 ) which is connected to the cha ssis by two scre ws ( Figure 4-11 ). Step 4: Remove the PSU r[...]

  • Seite 80

    PC 5170 Flat Panel PC Figure 4-11: PSU Bracket to Chassis Retention Scre ws Step 6: Remove the retention screws that c onnect the PSU to the PSU bracket ( Figure 4-12 ). Step 0 : Figure 4-12: PSU Brac ke t Rete ntion S crews 4.5.2 Install the New PSU To inst all a new PSU mod ule, plea se follow t he steps belo w. Step 1: Attach the PSU brack et to[...]

  • Seite 81

    PC 5170 Flat Panel PC Step 2: Step 3: Step 4: Step 5: Step 6: Step 7: Insert the PSU modul e and bra cket assembly into th e cha ssis a nd attach the PS U b rack et to t he chassi s w it h t he previously re mov ed retentio n screws. Secure the PSU modul e to the cha ssis b y reinserting t he previou sly removed retention screws th rough the bottom[...]

  • Seite 82

    PC 5170 Flat Panel PC Figure 4-13: Sy stem Cooling Fans Motherb o ard Connec tor Step 4: Remove the system cooling fans rete ntion screws from the left pane l ( Figure 4-14 ). Figure 4-14: Sy stem Cooling Fans Left Panel Re te ntion Scre w s Step 5: Remove the system coolin g fans from th e chas sis. Step 0: 4.6.2 Install the New Sy stem Cooling Fa[...]

  • Seite 83

    PC 5170 Flat Panel PC Step 4: Step 5: Reatta ch the elevated plat f orm. Repla ce the back cover . Step 0: Page 80 ACNODES ® Corp.[...]

  • Seite 84

    PC 5170 Flat Panel PC Chapter 5 5 AMI BIOS Page 81[...]

  • Seite 85

    PC 5170 Flat Panel PC 5.1 Introducti on A licensed copy of AMI BIOS is preprogra mmed into the ROM BIO S. The BIOS setup program allo ws users to modify the basi c syst em configuratio n. This cha pter describe s how to acce ss the BIOS setup prog ram and the co nf ig ur ati on op ti on s t hat ma y be change d. 5.1.1 Starting Se tup The AMI BIOS i[...]

  • Seite 86

    PC 5170 Flat Panel PC Key Function F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS chang es, only for Main Menu Table 5-1: BI OS Nav igation Key s 5.1.3 Getting Help When F 1 is presse d a sma ll help window de scribing the appropri ate keys to us e and the possible sele ction s for the highlighte[...]

  • Seite 87

    PC 5170 Flat Panel PC 5.2 Main The Main BIOS menu ( BIOS Menu 1 ) appears whe n the BIOS Setup pro gra m is entere d. The Main menu gives a n o verview of the basi c sy stem information. BIOS Menu 1: Main Î Sy stem Ov ervie w The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed. [...]

  • Seite 88

    PC 5170 Flat Panel PC 143 Sy stem Memory : Displays the auto-detected system memory . o Size : Lists m emory size The Sy st em Ov ervie w fi el d also has two use r configurabl e fields: Î System Time [xx:xx:xx] Use th e Syst em Ti me opt ion to se t t he sys tem time. Manually e nt er the ho urs, minutes and second s. Î System Date [xx/xx/xx] Us[...]

  • Seite 89

    PC 5170 Flat Panel PC BIOS Menu 2: Adv anced Page 86 ACNODES ® Corp.[...]

  • Seite 90

    PC 5170 Flat Panel PC 5.3.1 CPU Configur ation Use the CPU Configu ration menu ( BIOS Menu 3 ) to view detailed CPU sp ecificati ons and configure the CPU. BIOS Menu 3: CP U Con fi guration The CPU Co nfiguration menu ( BIOS Menu 3 ) lists th e following CPU details: 153 Manufac turer : List s the n am e of the CPU manufactu rer 154 Brand S tring :[...]

  • Seite 91

    PC 5170 Flat Panel PC The following CPU Co nfigu rati on me nu items can be configured. 159 Max CPUID V alue Limit 160 Hyper Thread ing T ech nology Î Max CUPID Value Limit [Disabled] NOTE: If the OS is NT , this value must be set to enabled. Î Disabled D EF AUL T Disables legacy OSes that cannot su pport CPUs with extended CUPID functions from b[...]

  • Seite 92

    PC 5170 Flat Panel PC 5.3.2 IDE Configuration Use the IDE Configuration menu ( BIOS Menu 4 ) to change and/or set the configuration of the IDE devices installed in the sys tem. BIOS Menu 4: IDE Configuration Î IDE Configur ation [P-AT A Only ] Use IDE Configuratio n opti on to setup the c onfig uration of the hard drive interfa ces. Î Disabled Th[...]

  • Seite 93

    PC 5170 Flat Panel PC Î S-ATA Ru nning Enhance d Mode [Yes ] Use S-ATA Running Enhanced Mode option to s elec t whet her t he S- ATA i nte rfac e is runnin g in enhan ced mo de or lega cy mode. Î Y es D EF AUL T The S-A T A interface is running in enh an ced mode. Î No The S-A T A interface is running in legacy mode. Î P-ATA Ch an nel Selection[...]

  • Seite 94

    PC 5170 Flat Panel PC Î Hard Disk Write Protect [Disabled] The Hard Disk Write Prote ct BIOS option prot ect s the hard disks from being ov erwritten. This menu ite m is only effective if the de vice is acces sed through the BIOS. Î Disabled D EF AUL T Allows hard disks to be overwritten Î Enabled Preve nts hard dis ks from being o verwritten Î[...]

  • Seite 95

    PC 5170 Flat Panel PC Î Host & D ev ice D EF AUL T Both the motherboa rd onboard IDE controlle r and IDE disk drive are used to detect the type of IDE cable used. Î Host The motherb oard onboar d IDE contro ller detect s the type of ID E cable used. Î Dev ice The IDE disk drive to detects the type of IDE cable used. Î IDE Master and IDE Sla[...]

  • Seite 96

    PC 5170 Flat Panel PC 5.3.2.1 IDE Master , IDE Slave Use the IDE Master and IDE Slave configuratio n menu to view both prim ary and secon dary IDE device details and configure t he IDE d evice s con nected to the sy stem. BIOS Menu 5: IDE Master and IDE Slave Configuration Î Auto-Detected Dr iv e Paramete rs The “grayed -out” items in the left[...]

  • Seite 97

    PC 5170 Flat Panel PC transfers of up to 64 KB per interrupt. 179 PIO Mode : Indicates the PIO mode of the installed device. 180 S.M.A.R.T . : Indicates whether o r not the Self-Monitori ng Analysis a nd Reporting T echn ology protocol i s suppo rted. 181 32Bit Dat a T ransfer : Enables 32-bit data transfer . Î Ty pe [Auto] Use the Type BIOS optio[...]

  • Seite 98

    PC 5170 Flat Panel PC Î Disabled BI OS i s p rev en te d fr om using the LBA mode contro l on the specified cha nnel. Î Auto D EF AUL T BIOS auto detect s th e LBA mode control on the spe cified channel. Î Block (Multi Sector Tr ans fer) [Au to] Use the Bloc k (Mu lti Sect or Tr ansfer ) to disab le or en able BIOS to auto detect if the device s[...]

  • Seite 99

    PC 5170 Flat Panel PC Î 4 PIO mode 4 selected wi th a maximum transfer rate of 16.6MBps (This setting generally works with all hard disk drive s manufactured after 1 999. For oth er disk drives, such as I DE CD- ROM drive s, chec k th e specifications of the drive.) Î S.M.A.R.T [Auto] Use th e S .M .A .R .T o pt io n to aut o-dete ct , d isable o[...]

  • Seite 100

    PC 5170 Flat Panel PC 5.3.3 Floppy Con f i g u r a tio n Use the Floppy Configuration menu ( BIOS Menu 6 ) to set or change the configurations for floppy disk drives. BIOS Menu 6: Flo ppy Configuration Î Floppy A [1.44 MB 3½ ”] The Floppy A configuration option determines the typ es of the fl oppy drive installed in the sys tem . The follo wing[...]

  • Seite 101

    PC 5170 Flat Panel PC 5.3.4 Super IO Configurati on Use the Super IO Co nfigur ation menu ( BIOS Menu 7 ) to set or cha nge the co nfiguratio n s for the FDD controllers, parallel port s an d serial po rts. BIOS Menu 7: Super IO Conf iguration Î On Board Floppy Controller [Enabled] Î Disabled Allows BIOS to disa ble the floppy controller Î Enabl[...]

  • Seite 102

    PC 5170 Flat Panel PC Î 3F8/IRQ4 D EF AUL T Serial Port 1 I/O port address is 3 F8 and the interrupt address is IRQ4 Î 3E8/IRQ4 Serial Port 1 I/O port address is 3E8 and the interrupt address is IRQ4 Î 2E8/IRQ3 Serial Port 1 I/O port address is 2E8 and the interrupt address is IRQ3 Î Serial Port2 Address [2F8 /IRQ3] Use the Seri al Por t2 Ad dr[...]

  • Seite 103

    PC 5170 Flat Panel PC Î Disabled No base address is assi gn ed to the Parallel Port Î 378 D EF AUL T Parallel Port I/O port add re ss is 378 Î 278 Parallel Port I/O port add re ss is 278 Î 3BC Parallel Port I/O port address is 3BC Î Parallel Port Mode [Normal] Use the Parallel Port Mode option to select t he m ode the parall el po rt operate s[...]

  • Seite 104

    PC 5170 Flat Panel PC Î IRQ5 IRQ5 is assigned as the parallel port interrupt address Î IRQ7 D EF AUL T IRQ7 is assigned as the parallel port interrupt address Î Digital I/O Address [280h] Use the Digital I/O Address option to select the interrupt address for digital I/O. Î 200h Digital I/O ad dre ss is 200h Î 220h Digital I/O ad dre ss is 220h[...]

  • Seite 105

    PC 5170 Flat Panel PC Î 10 Serial port 3 IRQ ad dre ss is 10 Î 11 D EF AUL T Serial port 3 IRQ ad dre ss is 1 1 Î Serial Port4 Address [2E 8] Use the Serial Port4 IRQ option to sele ct the interrupt addre ss for serial po rt 4. Î Disabled No base add ress is assi gned to serial p ort 4 Î 3E8 Serial port 4 I/O port addre ss is 3E8 Î 2E8 D EF A[...]

  • Seite 106

    PC 5170 Flat Panel PC Î 2F0 D EF AUL T Serial port 5 I/O port add re ss is 2F0 Î 2E0 Serial port 5 I/O port addre ss is 2E0 Î Serial Port5 I RQ [11] Use the Serial Port5 IRQ option to sele ct the interrupt addre ss for serial po rt 5. Î 4 Serial port 5 IRQ ad dre ss is 4 Î 9 Serial port 5 IRQ ad dre ss is 9 Î 10 Serial port 5 IRQ ad dres s is[...]

  • Seite 107

    PC 5170 Flat Panel PC 5.3.5 Hardw are Health Configuration The Hardware Health Configuration menu ( BIOS Menu 8 ) shows the operating temperature, fan speeds and system voltages. BIOS Menu 8: Hard w ar e Health Con fi guration Î H/W Health Function [Enabled] Î Disabled Disable s the health monitoring function Î Enabled D EF AUL T Enables the hea[...]

  • Seite 108

    PC 5170 Flat Panel PC o Fan2 Speed o Fan3 Speed 190 V oltages : The followin g sy stem volt ages are m onitored o Vcore o +1.50V o +3.30V o +5.00V o +12.0V o 5VSB 5.3.6 ACPI Configurat ion The ACPI Configuratio n m enu ( BIOS Menu 9 ) configure s the Advanced Co nfigu ration and Power Interfa ce (A CPI) and Powe r Man agement (APM) option s. BIOS M[...]

  • Seite 109

    PC 5170 Flat Panel PC 5.3.6.1 General AC PI Configuration Use the General ACPI Conf iguration menu ( BIOS Men u 10 ) to select the ACPI state when the system is su spe nded. BIOS Menu 1 0: General ACPI Configuration Î Suspend Mode [S1 (POS)] Use the Suspend Mod e op tion to specify the sl eep state the system enters wh en it is not being used. Î [...]

  • Seite 110

    PC 5170 Flat Panel PC 5.3.6.2 Advanced AC PI Configuration Use the Advanced ACPI C onfiguration menu ( BIOS Menu 11 ) to sele ct the ACPI st ate when the syst em is suspended. BIOS Menu 11: Adv anced ACPI Configuration Î ACPI 2.0 Features [No ] Use the ACPI 2.0 Features option to enable the ACPI (Advanced Configuration and Power Interface) feature[...]

  • Seite 111

    PC 5170 Flat Panel PC Î ACPI APIC Support [Ena bled] Use the ACPI APIC Support option to add a pointer to a n AC PI API C t abl e i n th e RS DT (Root System Description Table). The RSDT i s an a rray of poi nters that di rect the sy stem to the physi cal addre sses of other d escription tabl es. The RS DT is the mai n ACPI table. The RSDP is l oc[...]

  • Seite 112

    PC 5170 Flat Panel PC Î Enabled D EF AUL T Pointers to the AMI OEMB table are provided in the RSDT and the XSDT Î Headless Mode [Disabled] Use the Headless Mode option to update the ACPI FACP (Fix ed ACPI Descripti on Table) to indicate headle ss operations, i.e. a co mput er witho ut a monitor, keyboard a nd mouse. Î Disabled D EF AUL T The F A[...]

  • Seite 113

    PC 5170 Flat Panel PC 5.3.7 MPS Configur ation Use the MPS Configuration menu ( BIOS Menu 12 ) to s elect `he multi-processor table. BIOS Menu 12: MPS Conf iguration Î MPS Rev i sion [1.4] Use the Multiproce ssor Specification (M PS) fo r OS option to speci fy the MPS version to be used. Î 1.1 MPS version 1.1 is used Î 1.4 D EF AUL T MPS version[...]

  • Seite 114

    PC 5170 Flat Panel PC Î Remote Access [Disabled] Use the Remote Acce ss option to ena ble or di sabl e access to the remote functio nalities of the system. Î Disabled D EF AUL T Remote a cce ss is disable d . Î Enabled Remote acce ss configurati on options shown below appear: Î Serial Port N umber Î Serial Port Mode Î Flow Cont rol Î Redirec[...]

  • Seite 115

    PC 5170 Flat Panel PC 5.3.9 US B Configuration Use the USB Config uration menu ( BIOS Menu 13 ) to read USB co nfiguration informatio n and configure the USB settings. BIOS Menu 13: US B Co n figuration Î USB Configuration The USB Conf iguration field sho ws the system U SB con fi gu rat ion. T he i te ms l is ted ar e: 191 Module V ersi on: x.xxx[...]

  • Seite 116

    PC 5170 Flat Panel PC Î Disabled USB function support di sab led Î 2 USB Port s USB function sup port two USB port s Î 4 USB Port s USB function support four USB port s Î 6 USB Port s USB function support six USB ports Î 8 USB Port s D EF AUL T USB function support eight USB ports Î Legacy USB Support [Dis abled] Use the Legacy USB Support BI[...]

  • Seite 117

    PC 5170 Flat Panel PC 5.4 PCI/PnP Use the PCI/PnP menu ( BIOS Me nu 14 ) to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu m ay cau se th e system to m alfunction. BIOS Menu 14: PCI/PnP Configurat ion Î Plug & Play O/S [No] Use th e P lu g & Pl ay O/ S BI OS op ti on t[...]

  • Seite 118

    PC 5170 Flat Panel PC Î No D EF AUL T If the operating system does not meet the Plug a nd Play specifications, this option al lows the BIOS to configur e all the devices in the sys tem. Î Y es Thi s setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the s ystem is running Plu g and Play aware op[...]

  • Seite 119

    PC 5170 Flat Panel PC Î Palette Snooping [Disabled] Use the Palette Snooping option to enable or disable the palette snooping function. Î Disabled D EF AUL T Unless the VGA card manufacturer requires palette snoopin g to be enabled, this option shou ld be disabled. Î Enabled PCI devices are informed that an ISA based Graphics device is installed[...]

  • Seite 120

    PC 5170 Flat Panel PC Î PCI Slot 2 PCI Slot 2 is selected a s the location of the Of fBoard PCI IDE adapter c ard. Only s elect this s lot if the adapter card is inst alled in PCI Slo t 2. Î PCI Slot 3 PCI Slot 3 is selected a s the location of the Of fBoard PCI IDE adapter c ard. Only s elect this s lot if the adapter card is inst alled in PCI S[...]

  • Seite 121

    PC 5170 Flat Panel PC 203 IRQ7 204 IRQ9 205 IRQ10 206 IRQ 1 1 207 IRQ 14 208 IRQ 15 Î DMA Chan n el# [Av ailable] Use the DMA Channel# op tion to assi gn a spe c ific DMA channel to a particular PCI/PnP device. Î A vailable D EF AUL T The specified DMA is available to be used by PCI/PnP devices Î Reserv ed The specified DMA is reserved for u se [...]

  • Seite 122

    PC 5170 Flat Panel PC Î Reserved Memor y Size [Disabled] Use th e Re se rv ed M em ory S ize BI OS o pti on to spe cify the amount of memory that shoul d be rese rved for legacy ISA devices. Î Disabled D EF AUL T No memory b lock re served for legacy ISA devices Î 16K 16KB reserved for legacy ISA devices Î 32K 32KB reserved for legacy ISA devic[...]

  • Seite 123

    PC 5170 Flat Panel PC 5.5 Boot Use the Boot menu ( BIOS Menu 15 ) to configure system boot options. BIOS Menu 15: Boot Page 120 ACNODES ® Corp.[...]

  • Seite 124

    PC 5170 Flat Panel PC 5.5.1 Boot Settings Configur ation Use the Boot Settings Configuratio n men u ( BIOS Men u 16 ) to confi gure adva nce d system boot options. BIOS Menu 16: Boot Settings Configuration Î Quick Boot [Enabled] Use th e Q ui ck B oo t B IOS op ti on t o m ake the comput er spee d up the boot pro cess. Î Disabled No POST procedur[...]

  • Seite 125

    PC 5170 Flat Panel PC Î Disabled D EF AUL T Normal POST messages displayed Î Enabled OEM Logo displayed instead of POST messages Î AddOn ROM Display Mode [For ce BI OS] Use the AddOn ROM Di splay Mode option to allow add-on ROM (read-onl y memory) messages to be displ ayed. Î Force BIOS D EF AUL T The system forces third party BIOS to display d[...]

  • Seite 126

    PC 5170 Flat Panel PC Î Disabled PS/2 mouse support i s disabled a nd pr evented from using syst em resou rces. Î Enabled Allows the system to use a PS/2 mouse. Î Auto D EF AUL T The system a uto-adjust s P S/2 mouse su pport. 5.5.2 Boot Device Priority Use the Boot Device Priority menu ( BIOS Menu 17 ) to specify the boot se quence from the ava[...]

  • Seite 127

    PC 5170 Flat Panel PC 5.5.3 Removable Dri ves Use the Rem ovable Drives menu ( BIO S Menu 18 ) to spe cify the boot seq uence of the available FD Ds. Whe n the menu is op ened, t he F DDs conn ecte d to the system are listed as shown bel ow: 218 1st Dri ve [1st FLOPPY DRIVE] NOTE: Only the driv es connected to the syst e m are sho wn . For exam ple[...]

  • Seite 128

    PC 5170 Flat Panel PC 5.6 Security Use the Security menu ( BI OS Menu 19 ) to set system and user passwords. BIOS Menu 19: Securit y Î Change Supervisor Passw or d Use the Change Supervisor Password to set o r ch ange a superviso r password. The default for this option is Not Installed. If a sup ervisor pa ssw ord mus t be insta lled, s elect this[...]

  • Seite 129

    PC 5170 Flat Panel PC 5.7 Chipset Use the Chipset m enu ( BIOS Menu 20 ) to access the NorthBridge and S outhBridg e configuratio n menus WARNING! Setting the wrong values for the Chip set BIOS selections in the C hipset BIOS menu may cause the syst em t o malfuncti on. BIOS Menu 20: Chipset Page 126 ACNODES ® Corp.[...]

  • Seite 130

    PC 5170 Flat Panel PC 5.7.1 NorthBridge Co nfi gur ati on Use the Nort hBridge Conf iguration menu ( BIOS Menu 21 ) to configure the n orthbridge chipset . BIOS Menu 21: NorthBridge Chipset Configurat ion Î DRAM Freq u ency [Auto] Use the DRAM Freque ncy option to specify t he DRAM frequen cy or allow the system to automatically detect the DRAM fr[...]

  • Seite 131

    PC 5170 Flat Panel PC Î Configure DRAM Timing by SPD [Enabled] Use the Confi gure DRAM T iming by SPD option to de te rmi ne i f t he sy stem u se s th e S PD ( Serial Presence Detect) EEPROM to c onfigure the DRAM timing. The SPD EEPROM contains all necessary DIMM specification s incl uding the speed of the individual compone nts su ch a s CAS an[...]

  • Seite 132

    PC 5170 Flat Panel PC Î Init. Graphic Adapter Pr iority [PCI/Int-VGA] The Init. Graphic Adapter Priority option selects the gr aphics controll er the system uses as a primary boot device . The options are: 223 Internal VGA 224 PCI/Int-VGA D EF AUL T Î Internal Graphics Mode Select [Ena ble, 8MB] Use the Internal Graphic Mode Select option to s pe[...]

  • Seite 133

    PC 5170 Flat Panel PC Î Boot Display Devi ce [CRT +LFP ] Use the Boot Display Device option to select t he display device used by the system when it boots . Configuration options are listed below. 225 CR T 226 LFP 227 CR T+LF P D EF AUL T Î Flat Panel Ty pe [640 x48 0] Use the Flat Panel Type option to selec t the type of f lat panel connecte d t[...]

  • Seite 134

    PC 5170 Flat Panel PC 5.7.2 SouthBridge Conf igu rat ion The SouthBri dge Configuration menu ( BIOS Menu 22 ) the sout hbrid ge chi pset to be configured. BIOS Menu 22: Sout hBridge Chipset Con figuration Î OnBoard AC97 Audio [Auto] Use the OnBoard A C97 Audio option to enable or disable the AC’9 7 CODEC. Î Auto D EF AUL T The onboa rd AC’97 [...]

  • Seite 135

    PC 5170 Flat Panel PC 5.8 Power The Power m enu ( BIOS Menu 23 ) allows the advan ced po wer ma nagement options to be configured. BIOS Menu 23: Po wer Î Power Management/APM [Enabled] Use the Power Management/APM BIOS option to enable ac cess to the advanced power management features. If this option is disabled, the on ly othe r opt ion on t he s[...]

  • Seite 136

    PC 5170 Flat Panel PC Î Video Pow er Do w n Mode [Suspend] The Video Power Down Mode BIOS option sp ecifies in what system mode the video device can be turned off. Î Disabled The Vi deo cannot be turned off in the Suspend or S tandby mode Î S t andby The video can be turned of f in the S tandby mo de Î Suspend D EF AUL T The video can be turned[...]

  • Seite 137

    PC 5170 Flat Panel PC 244 20 Min 245 30 Min 246 40 Min 247 50 Min 248 60 Min Î Suspend Time Out [Disabled] The Suspend Time Out option specifie s what l ength of time without activity on certain compone nts will place those compone nts in a su sp ended state. The options are listed below: 249 Disabled Default 250 1 Min 251 2 Min 252 4 Min 253 8 Mi[...]

  • Seite 138

    PC 5170 Flat Panel PC Î Resto re o n AC Po w e r L o ss [L ast Sta te ] Use the Restore o n AC Power Lo ss option to sp ecif y what state t he system returns t o if there is a sud den loss of p ower to the system. Î Power Off The system remain s turne d of f Î Power On The system turn s on Î Last S t ate D EF AUL T The system r eturns t o it s [...]

  • Seite 139

    PC 5170 Flat Panel PC Î Disabled D EF AUL T The real time clo ck (R TC) can not ge nerate a wa ke event Î Enabled If selected, the following appears with values that can be sel ected: Î RTC Alarm D at e (Day s) Î Sy stem Time After setting t he alarm, the comp uter tu rns it self on from a susp e nd state whe n the alarm goes of f. 5.9 Exit Use[...]

  • Seite 140

    PC 5170 Flat Panel PC Î Save Changes and Ex it Use the Save Changes an d Exit option to save the change s made to the BIOS options and to exit the BIOS configuration setup program. Î Discard Cha nges and Ex it Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system. Î Dis[...]

  • Seite 141

    PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 138 ACNODES ® Corp.[...]

  • Seite 142

    PC 5170 Flat Panel PC Appendix A A ACNODES Panel PC Product Line[...]

  • Seite 143

    Page 139[...]

  • Seite 144

    PC 5170 Flat Panel PC A.1 ACNODES Panel PC Product s A.1.1 Overview ACNODES panel PC products are fle xible, multi-functional flat panel PCs that can be applied in d ive rse operati onal envi ronment s and i mpleme nted in multi- faceted applications . ACNODES panel PC p roduct s co me full y kitte d wit h hig h-per forma nce mot her boards , CPUs,[...]

  • Seite 145

    PC 5170 Flat Panel PC Model PPC-2706GS LCD Size 6.5” TFT LCD 8.4” TFT LCD Max. Resolution 640 x 480 800 x 600 Brightness 400 cd /m2 220 cd /m2 LCD Color 262K 262K View i ng A ngle 120/100 120/100 Backlight MTBF 50000hrs 20000hrs SBC Mode l WAFER-LX800 WAFER-LX800 CPU AMD LX800 AMD LX800 RAM 1 x DDR 333/400MHz SO DIMM sock e t up to 1GB 1 x DDR [...]

  • Seite 146

    PC 5170 Flat Panel PC A.2.2 PPC-37 Se ries Panel PC Sol utions All the models listed in the table below support Intel  Pentium® M / Celeron ® M / ULV Celer on ® M 1GHz/80 0MHz CPUs. Model PPC-3708GS PPC-3710GS PPC-3715GS LCD Size 8.4” TFT LCD 10.4” TFT LCD 12.1” TFT LCD 15” TFT LCD 17” TFT LCD Max. Resolution 800 x 600 800 x 600 800[...]

  • Seite 147

    PC 5170 Flat Panel PC Model PPC-3708GS PPC-3710GS PPC-3715GS 2 x SATA 2 x SATA 2 x SATA 2 x SATA 2 x SATA SSD CF Type II CF Type II CF Type II CF Type II CF Type II Expansion Slot N/A N/A N/A 1 x PCI 1 x PCI HDD Driv e Bay 1 x 2.5” SATA/I DE HDD 1 x 2.5” SATA/I DE HDD 1 x 2.5” SATA/I DE HDD 1 x 3.5” Removable SATA/I DE HDD, 1 x 2.5” SATA/[...]

  • Seite 148

    PC 5170 Flat Panel PC A.2.3 PPC-51 Se ries Panel PC Sol utions All the models listed in the table below supp ort Intel  Pentium® 4 / Celeron® D CPUs up to 2.8GHz. Model PPC-5150GS LCD Size 15” TFT LCD 17” TFT LCD 19” TFT LCD Max. 1024 x 786 1280 x 1024 1280 x 1024 Resolution Brightness 350 cd/m 2 300 cd/m 2 300 cd/m 2 LCD Color 262K 16.2[...]

  • Seite 149

    PC 5170 Flat Panel PC Model PPC-5150GS w/o Anti-Sho ck w/o Anti-Sho ck w/o Anti-Sho ck FDD Driv e Ba y 1 x Slim FDD 1 x Slim FDD 1 x Slim FDD CD-ROM 1 x Slim CD-R OM 1 x Slim CD-R OM 1 x Slim CD-R OM Driv e Bay Powe r Supply 180W ATX Po wer 180W ATX Po wer 180W ATX Po wer Mounting Stand/ Rack/ Wall/Panel/ Arm Stand/ Rack/ Wall/Panel/ Arm Stand/ Rac[...]

  • Seite 150

    PC 5170 Flat Panel PC Model PPC-5150GS Celer on ® D Celer on ® D Celer on ® D RAM 2 x DDR 400MHz DIMM so cket up to 2GB 2 x DDR 400MHz DIMM so cket up to 2GB 2 x DDR 400MHz DIMM so cket up to 2GB I/O Ports 1 x RS-232/422/485 1 x RS-232/422/485 1 x RS-232/422/485 3 x RS-232 3 x RS-232 3 x RS-232 4 x USB 2.0 6 x USB 2.0 6 x USB 2.0 2 x PS/2 2 x PS[...]

  • Seite 151

    PC 5170 Flat Panel PC A.2.5 PPC-53 Se ries Panel PC Sol utions All the models listed in the table below support Intel  Pentium® M / Celeron ® M / ULV Celer on ® M 1GHz/80 0MHz CPUs. Model PPC-5350GS LCD Size 15” TFT LCD Max. Resolution 1024 x 786 Brightness 350 cd /m2 LCD Color 262K View i ng A ngle 120/100 Backlight MTBF 50000hrs SBC Mode [...]

  • Seite 152

    PC 5170 Flat Panel PC HDD Driv e Bay 1 x 2.5” SATA/ID E HDD CD-ROM 1 x Slim CD-R OM Driv e Bay Powe r Supply 150W ATX Power Mounting Stand/ Rack/ Wall/Panel/ Arm Dimension (W xDxH) mm 410 x 309 x 110 Weight 8/12kg Front Pane l Prot ection IP 65 compliant Touch Screen Resistive Type 5-wi re wi th RS-232 Interface Table A-5: PPC-53 Ser ies Panel PC[...]

  • Seite 153

    PC 5170 Flat Panel PC Appendix B B Interface Connectors Page 149[...]

  • Seite 154

    PC 5170 Flat Panel PC The PC 5170 flat panel PC EMBEDDED motherboa rd come s with a number of per ipher al interface connectors and conf igu rati on jump ers list ed in Chapte r 2 . The pinouts for these connectors are lis ted below. B.1 Floppy Disk Drive Connector EMBEDDED board is e quipped with a 34 -pin dai sy-chai n driver con nector cabl e. P[...]

  • Seite 155

    PC 5170 Flat Panel PC B.2 PCI E-IDE Disk Drive Connector Four IDE (Integrate d Dev ice Electroni cs) ha rd disk drives can be attache d to the EMBEDDED IDE controller . IDE1, IDE2: Primary , Secon dary IDE Connector PIN Description PIN Description 1 RESET# 2 GND 3 DATA 7 4 DATA 8 5 DATA 6 6 DATA 9 7 DATA 5 8 DATA 10 9 DATA 4 10 DATA 11 11 DATA 3 12[...]

  • Seite 156

    PC 5170 Flat Panel PC B.3 Parallel P ort This port i s usually con ne cted to printe r . The E MB E DD ED include s one on-b oard pa rallel port, accesse d throug h 25-pin D-type fe male connect or LPT1. LPT1: (LPT1 DB-25 Femal e) Parallel Port Conne ctor PIN Description PIN Description 1 STRO BE# 2 DATA 0 3 DATA 1 4 DATA 2 5 DATA 3 6 DATA 4 7 DATA[...]

  • Seite 157

    PC 5170 Flat Panel PC CN20 A: Seri al Port DB-9 Male Conne ctor ( CO M 1) PIN Description 1 DATA CARRIE R DETECT (DCD) 2 RECEIV E DATA (RX D) 3 TRANSMIT DATA (TXD) 4 DATA TERMI NAL READY (DT R ) 5 GROU ND (GN D) 6 DATA SET R EADY (DSR) 7 REQUEST TO SEND (RTS) 8 CLEAR TO SE ND (CTS) 9 RING INDICATOR (RI) COM2: Serial Port 2 x 5 Pin Header Connect or[...]

  • Seite 158

    PC 5170 Flat Panel PC RS-485 Mod e PIN Description PIN Description 1 RTX- 2 NC 3 RTX+ 4 NC 5 NC 6 NC 7 NC 8 Voltage 9 NC 10 NC CN20 B: Seri al Port DB-9 Male Conne ctor ( CO M 2) COM2 sup po rts three mo des: RS-232, RS -4 22 and RS-485 (via DB-9 Con nec tor). RS-232 Mod e PIN Description PIN Description 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTX 4 DTR 9 [...]

  • Seite 159

    PC 5170 Flat Panel PC RS-485 Mod e PIN Description PIN Description 1 RTX- 6 NC 2 RTX+ 7 NC 3 NC 8 NC 4 NC 9 Voltage 5 NC COM3: Seria l Port 2x5 Pin Head er Co nnector PIN Description PIN Description 1 DCD 2 DSR 3 RXD 4 RTS 5 TXD 6 CTX 7 DTR 8 RI 9 GND 10 NC COM4: Seria l Port 2x5 Pin Head er Co nnector PIN Description PIN Description 1 DCD 2 DSR 3 [...]

  • Seite 160

    PC 5170 Flat Panel PC CN22: Serial Port DB-9 Male Connector (COM4) PIN Description 1 DATA CARRIE R DETECT (DCD) 2 RECEIV E DATA (RX D) 3 TRANSMIT DATA (TXD) 4 DATA TERMIN AL READ Y (DT R ) 5 GROU ND (GN D) 6 DATA SET R EADY (DSR) 7 REQUEST TO SEND (RT S) 8 CLEAR TO SE ND (CTS) 9 RING INDICATOR (RI) COM5: Seria l Port 2x5 Pin Head er Co nnector PIN [...]

  • Seite 161

    PC 5170 Flat Panel PC B.5 Keyboard / Mouse Connector The EMBEDDED provide s one keybo ard and one mo use box heade r con nector , as well as external PS/2 keyboard an d mouse co nnecto rs. CN23A (Purpl e): Extende d Key board 6-pin Mini Din Connector PIN Description 1 KB DATA 2 NC 3 GND 4 VCC 5 KB CLOCK 6 NC CN23B (Green): Extend ed Mouse 6-pin Min[...]

  • Seite 162

    PC 5170 Flat Panel PC CN15: PS/2 Mouse 5-pin Head er Co n nector PIN Description 1 MS CLOCK 2 MS DATA 3 N/C 4 GND 5 +5V B.6 External Switches and Indicato rs CN8: Multi Panel PIN Description PIN Description 1 SPEAK ER 11 POWE R-VC C 2 N/C 12 N/C 3 N/C 13 GND 4 +5V 14 KEYLOCK 5 RESET SW 15 GND 6 GND 16 GND 7 IDE LED - 17 N/C 8 IDE LED+ 18 ATX PO WER[...]

  • Seite 163

    PC 5170 Flat Panel PC B.7 USB Port Connector The EMBEDDED has ei ght built-in USB port s for the future I/O bus ex pan sion. CN26, CN27, CN28: 8-PIN Header USB Connectors PIN Description 1 8 VCC 3 6 USBD0- 5 4 USBD0+ 7 2 GND CN25: 2 Exte rnal USB Connectors PIN Description 1 5 VCC 2 6 USBD0- 3 7 USBD0+ 4 8 GND Page 159[...]

  • Seite 164

    PC 5170 Flat Panel PC B.8 IrDA Infrared Interface Port The EMBEDDED has a buil t-in IrDA port that sup ports S erial Infra red (SIR) or Amplitude Shi f t K ey ed I R (A S KIR ) int erfa ces. T o use th e I rDA por t, con fi gur e t he FI R or ASK IR model in the Peripheral Setup COM2 i n BIOS. Then the norma l RS-232 COM2 will be disabled. IR1: IrD[...]

  • Seite 165

    PC 5170 Flat Panel PC B.9 VGA Connector The EMBEDDED provides one DB -15 f emale conn ector a nd on e built-in 10-pi n VGA box head er conn ector that can be co nnected dire ctly to a monoch rome CRT monitor as well as high re solutio n color CR T monitor . VGA1: DB-1 5 Female VGA Co nnec tor PIN Description PIN Descrip tion 1 RED 2 GREEN 3 BLUE 4 [...]

  • Seite 166

    PC 5170 Flat Panel PC B.10 LAN RJ45 Connector The EMBEDDED is equipp ed with two Gigabit Ethernet Controlle r R TL81 10SC chip sets and tw o G bE L AN RJ- 45 c on ne c t or s. CN31: Dual LAN RJ45 Connecto r PIN Description PIN Description 1 TX+ ( or MDX0+) 5 N/C (or MD X2- ) 2 TX- (or MDX0-) 6 RX- (or MDX1-) 3 RX+ (or MDX 1+) 7 N/C (or MDX3+) 4 N/C[...]

  • Seite 167

    PC 5170 Flat Panel PC F AN2: Sy stem Fan Connector PIN Description 1 GND 2 +12V 3 Fan Sensor F AN3: Sy stem Fan Connector PIN Description 1 GND 2 +12V 3 Fan Sensor B.12 Inverter (LC D Ba cklight) Conn ector CN12: Inverter (LCD Backlight) Connector PIN Description PIN Description 1 NC 2 GND 3 +12V 4 GND 5 ENABKL Page 163[...]

  • Seite 168

    PC 5170 Flat Panel PC B.13 LCD Panel L VDS Interface Connector The EMBEDDED provides up to 48-bit color TFT LCD. CN3 0: D F13-30 DP-1. 25 L VDS Interface Connector PIN Description PIN Description 1 GND 2 GND 3 A0P 4 A0M 5 A1P 6 A1M 7 A2P 8 A2M 9 CLK1 P 10 CLK1 M 11 A3P 12 A3M 13 GND 14 GND 15 A4P 16 A4M 17 A5P 18 A5M 19 A6P 20 A6M 21 CLK2 P 22 CLK2[...]

  • Seite 169

    PC 5170 Flat Panel PC CN2: Audio LINE OUT (2.54mm) PIN Description PIN Description 1 LINEOUT_L 2 GND 3 GND 4 LINE OUT_R CN24: Audio Jack Color Descrip tion RED MIC IN BLUE LINE IN GREEN SPEAK OUT B.15 Digit al Input / Output CN6: Digital Input / Output PIN Description PIN Description 1 GND 2 +5V 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3[...]

  • Seite 170

    PC 5170 Flat Panel PC B.16 Comp act Flash TYPE I I S torage Card Socket The EMBEDDED configures Comp act Flas h TYPE II S t orage Card in IDE Mode. CF1: Compact Flash TYPE II Socket PIN Assignment PIN Description PIN Description 1 GROUND 26 CARD DETE CT1 2 D3 27 D11 3 D4 28 D12 4 D5 29 D13 5 D6 30 D14 6 D7 31 D15 7 CS1# 32 CS3# 8 N/C 33 N/C 9 GROUN[...]

  • Seite 171

    PC 5170 Flat Panel PC B.17 A TX Power Connector PW2 is a 20-pin A TX powe r supply con nector with the following pin assignme nt s. PW2: A TX Po w er Supply Connector PIN Description PIN Des cription 11 3.3V 1 3.3V 12 -12V 2 3.3V 13 GND 3 GND 14 PS-ON 4 +5V 15 GND 5 GND 16 GND 6 +5V 17 GND 7 GND 18 -5V 8 Powe r good 19 +5V 9 5VSB 20 +5V 10 +12V B.1[...]

  • Seite 172

    PC 5170 Flat Panel PC NOTE: The powe r from PW1 sho uld sup port at l east a 6.5A current for the P4 CP U. If the power ou tput is too low , the CPU m ay not function normally . Be sure the power from the powe r supply is suf f icie nt, and don’ t sha re thi s po wer with othe r device s, such as hard disk etc. Use A CNODES’ s special A TX powe[...]

  • Seite 173

    PC 5170 Flat Panel PC Appendix C C BIOS Configuration Options Page 169[...]

  • Seite 174

    PC 5170 Flat Panel PC C.1 BIOS Configuration Options Below is a list of BIOS conf iguratio n options descri bed in Chapter 5 . Î System O vervie w ....... ...................... ...................... ...................... ...................... ....84 Î System Time [xx:xx:xx] .............. .......... ........ ........... ........ ........ ....[...]

  • Seite 175

    Page 170 ACNODES ® Corp.[...]

  • Seite 176

    PC 5170 Flat Panel PC Î Parallel Port Mode [Normal]................ ........ ...... ..... ........ ...... ........ ...... ..... ........ ... 100 Î Parallel Port IRQ [I RQ7]........... ...... .. ... ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..... ... ... ..... . 100 Î Digital I/O A ddress [280h] ....... ............... ..........[...]

  • Seite 177

    PC 5170 Flat Panel PC Î PCI Latency Time r [64] .................. ......... ..... ........ ...... ..... ......... ..... ........ ...... ..... ... 115 Î Allocate IRQ to PCI VGA [Yes ] .............................. ...................... ...................... 115 Î Palette Snoopi ng [Disabled] ........................ ...... ..... ........ ....[...]

  • Seite 178

    PC 5170 Flat Panel PC Î Resume on PME# [Disabled] .............. ..... ......... ..... ...... ........ ..... ......... ..... ...... ..... 135 Î Re sume On RTC A larm [Disabled].......... ......... ........... ........ ........... ........ ........ ... 135 Î RTC Alarm Date (Days) .......... ........ ......... ........... ........ ........ .......[...]

  • Seite 179

    PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 174 ACNODES ® Corp.[...]

  • Seite 180

    PC 5170 Flat Panel PC Appendix D D Software Drivers Page 175[...]

  • Seite 181

    PC 5170 Flat Panel PC D.1 Introduct ion The touch p a nel controller enabl es anal og resist ive touch p anels for four-wire, five-wi r e & eight-wire models. The co ntroller dire ctly co mmuni ca tes with the PC system th roug h the tou ch panel commun ication s in terface. Th e con troller design is superior in sensitivity , accuracy , and fr[...]

  • Seite 182

    PC 5170 Flat Panel PC Figure D-1: Driv er CD Pop Up Screen Step 3: S ele ct t he o pera tin g sys tem in stall ed on the system from the menu on the left side of the screen. NOTE: The following description is for dri ver inst allation using a Win do ws 2000 OS. If a dif ferent OS is inst alled, please refer to the d river user m anual for the rele [...]

  • Seite 183

    PC 5170 Flat Panel PC Figure D-2: Install Shield Wizard Prep aration Step 5: After the Install Shield Wiza rd is rea dy , a welcome screen ap pears ( Figur e D-3 ). Figure D-3: Welcome Screen Step 6: Step 7: T o continue the installation process click N EXT . An Inst all PS/2 interface d river screen appea rs ( Figure D-4 ). It is not nec es sa ry [...]

  • Seite 184

    PC 5170 Flat Panel PC Figure D-4: Install PS/2 Interface Driver Step 8: Four point cal ibration o ptions are then se lected. Four point cali brations can b e done every time a user boots up, during t he next time the system boots or never . Select when a four-p oint calibration sh ould be done. Click N EXT to continue. Page 179[...]

  • Seite 185

    PC 5170 Flat Panel PC Figure D-5: Install PS/2 Interface Driver Step 9: The user is then prompted to ensure the touch moni tor or the USB for the to uch controller is p lugge d into the system ( Figure D-6 ). On ce the touch controlle r is plugged into the syste m, cli ck OK . Figure D-6: T ouch Monitor/USB T ouch Controller Confirmation Step 10: T[...]

  • Seite 186

    PC 5170 Flat Panel PC Figure D-7: Cont roller Installation Directory Step 11: The user is then p rompted to select a fil e d irec tory in wh ich th e pr ogra m icons are saved ( Figure D-8 ). Th e default folder is “T ouchKit.” If a dif ferent folder must be used, select a folder from the list s hown. O nce th e fold er i s se lected , clic k N[...]

  • Seite 187

    PC 5170 Flat Panel PC Figure D-8: Program Icon Directory Step 12: The program then st a rt s inst alling ( Figure D-9 ). Figure D-9: Installing Page 182 ACNODES ® Corp.[...]

  • Seite 188

    PC 5170 Flat Panel PC Step 13: Once the pro gram is finish ed inst alling, the user is pro mpted to rest art the computer n ow or to rest art the computer later ( Figure D-10 ). Select when the computer sho uld be rest arted and click F INISH to complete the driver installation proced ure. Figure D-10: Installation Complete D.3 T ouch Pa nel Driver[...]

  • Seite 189

    PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 184 ACNODES ® Corp.[...]

  • Seite 190

    PC 5170 Flat Panel PC E Index Page 185[...]

  • Seite 191

    PC 5170 Flat Panel PC A Applications ......................... ................ ......20 Arm Mountin g ..... ........... ............... ........... ..63 A TX 12 V Power Connector ......................167 A T X Power Connector ... ........... ...............167 Audio Connectors ........ ............ ................164 Audio Port C onnection..... [...]

  • Seite 192

    PC 5170 Flat Panel PC L LAN RJ45 Connector......... ............. .........162 LCD Panel Connection .... ........... ...............66 LCD Panel L VDS In terface Connector ....164 LCD V oltage Setup ..................... ...............50 M Maintenance and Cl eaning .... .. ... ..... ... ..... ... .4 Model V ariat i on .. ..... ... ..... ... .. .. [...]