ACR Electronics Y1-03-0203 Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 100 Seiten
- 4.43 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
-
Marine RADAR
ACR Electronics Y1-03-0212-1
87 Seiten 4.9 mb -
Marine RADAR
ACR Electronics 2607
100 Seiten 4.43 mb -
Marine RADAR
ACR Electronics 2662
111 Seiten 4.45 mb -
Marine RADAR
ACR Electronics Y1-03-0203
100 Seiten 4.43 mb -
Marine RADAR
ACR Electronics Y1-03-0211
111 Seiten 4.45 mb -
Marine RADAR
ACR Electronics NAUTICAST Y1-03-0212-1
87 Seiten 0.39 mb -
Marine RADAR
ACR Electronics Nauticast Y1-03-0212
94 Seiten 0.52 mb -
Marine RADAR
ACR Electronics Nauticast 2662
111 Seiten 0.2 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung ACR Electronics Y1-03-0203 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von ACR Electronics Y1-03-0203, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung ACR Electronics Y1-03-0203 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung ACR Electronics Y1-03-0203. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung ACR Electronics Y1-03-0203 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts ACR Electronics Y1-03-0203
- Den Namen des Produzenten und das Produktionsjahr des Geräts ACR Electronics Y1-03-0203
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts ACR Electronics Y1-03-0203
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von ACR Electronics Y1-03-0203 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von ACR Electronics Y1-03-0203 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service ACR Electronics finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von ACR Electronics Y1-03-0203 zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts ACR Electronics Y1-03-0203, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von ACR Electronics Y1-03-0203 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
[...]
-
Seite 2
User Manual 2 Y1 - 03 -0203 Re v.L Please read this first! Warning: Although ACR striv es for accuracy in all its publications; thi s material may contain errors o r omissions, and is subject to chan ge without prior notice. ACR shall not be made li able for any specific, indirec t, incidental or con sequential da mages as a resul t of its use. ACR[...]
-
Seite 3
User Manual 3 Y1 - 03 -0203 Re v.L 1 S TARTING THE NAUTICAST ............................................................................................... 5 1.1 Initial Set Up of the NAUTICAST for operation ................................................................................................... 5 1.2 Entering the MMSI and IMO Numbers .[...]
-
Seite 4
User Manual 4 Y1 - 03 -0203 Re v.L History of Change s Date Version Rev. Status Comments Responsible 2002 - 12 - 04 1.0 A Released Latest release amend ments A. Lesch 2003 - 03 - 18 1.0 B Released Updated EC-Con formity Document inser ted. C. Moore 2003 - 03 - 27 1.0 C Released B553 picture update F. Gruber 2003 - 03 - 31 1.0 D Released New front c[...]
-
Seite 5
User Manual 5 Y1 - 03 -0203 Re v.L 1 Starting the NA U TICAST 1.1 Initial Set U p of the NAUTICAST for operation ATTENTION: IM O REGULATIONS M ANDATE T HA T YOU ENTER T HIS INFORM ATION. After installing the antennas and hardw are the fol lowing User, Voy age related and Ship Settings data needs to be entered. Upon S tart-up (Applyi ng power) enter[...]
-
Seite 6
User Manual 6 Y1 - 03 -0203 Re v.L 1.2 Entering the MMSI and IMO Numbers Select from the M ain Menu “Service Conf iguration” Numbe r 6 . Menu is SE RVICE passw ord protected (Please see Appendi x 7.2 for passwor d information). Enter Ser vice Passw ord and use the ?[...]
-
Seite 7
User Manual 7 Y1 - 03 -0203 Re v.L 1.3 Entering Ship Settings (Please see Appendix 7.2 for password in formation).Enter Pas[...]
-
Seite 8
User Manual 8 Y1 - 03 -0203 Re v.L GPS A NTENNA location on ship (is x in above M enu example) is loca ted 200 meters from bow (A) and 33 Meters from Starboard side (D). Note: W hen only using internal GPS antenna it is ok to have de fault values for ex ternal position since they are not used. Ref.Points e xt (Position of the external GPS a ntenna)[...]
-
Seite 9
User Manual 9 Y1 - 03 -0203 Re v.L Scroll to the Voy age Setting Fiel ds with up and do wn arrow s and input your vessel data. Select a default Cargo Type, Drau ght, POB (Pers ons on board), Destinati on, ETA and Nav igation Status Setting usi ng the [Le ft] & [Right] arrow keys. Save the new settings by pressin g [Save], and return to the M ai[...]
-
Seite 10
User Manual 10 Y1 - 03 -0 203 Rev.L Changing the Service Pass word ?[...]
-
Seite 11
User Manual 11 Y1 - 03 -0 203 Rev.L Service Pass word Menu Example : Enter the new Password: Then push Enter (M 5). Repeat the new Password: Then Push Enter (M 5). A m inimum of 6, a maxi mum of 8 characters are allowed. Should t he new password include numbers, use the shift key to generate them. Press Save to s tore the change . Changing the User[...]
-
Seite 12
User Manual 12 Y1 - 03 -0 203 Rev.L Enter the new Password. A m inimum of 6, a maximum of 8 characters are allowed. Should the new password incl ude numbers, use the shift key to generate them. Repeat the new Password. Press Save to s tore the changes . N48^12' E 16^26' |1> N/A|2> N/A|3> N/A ********* Change User Password *******[...]
-
Seite 13
User Manual 13 Y1 - 03 -0 203 Rev.L 2 NAUTICA ST User Interface Soft Keys [M1] – [M8] Display Safety Keys Cursor Cross Enter Key Keyboard Navigation Screen Header (max. 3 lines) _________________ Navigation Screen or MENU Structure (Content 13 lines)[...]
-
Seite 14
User Manual 14 Y1 - 03 -0 203 Rev.L 2.1 NAUTICAST Keyboard The NAUTICAS T is fitted w ith a full alphanumeric keyboard, wi th the following functions : By pressing any key on the key board the letters a re addressed. Number symbol s and special characters are addr essed by holdi ng down the shift [ ] key and simultaneously pressing the chose n [...]
-
Seite 15
User Manual 15 Y1 - 03 -0 203 Rev.L 2.4 Explanation of the Soft Key s The Soft Key s are divided into vertical static keys [M1-M4] and horizontal d ynamic keys [M 5-M8], which differ in function accordi ng to the curren t application. Soft Key Definition [M1] filter option on AIS targets in graphica l view FA ( hides recei ved Class A tar gets) FB [...]
-
Seite 16
User Manual 16 Y1 - 03 -0 203 Rev.L 3 NAUTICA ST Screens The advanced versi on of the NAUTICAST offers three di spla y modes: Navigation Screen - Standard screen, au tomatically visible Menu Structu re - Visible after pressing the [Menu] Sof t Key Graphical User Inte rface - The Graphical User Int erface is visible after press ing the [M2] Sof t Ke[...]
-
Seite 17
User Manual 17 Y1 - 03 -0 203 Rev.L 3.1.1 Own Vessel Data LAT:N 1°27.845'ExtSOG:34.6kn 05/26/06 LON:E 0°21.289'ExtCOG:173.0° 10:52:26 LAT: Latitude LON: Longitude Date: The actual UTC - date (MM .DD.YY) and time (h h.mm.ss) are displ ayed on the top right hand corne r of this v iew. IntGPS: 3D A/ ExtHDT:222° Reg6 IntGPS Indicates norm[...]
-
Seite 18
User Manual 18 Y1 - 03 -0 203 Rev.L 3.1.2 Other Vessel Data 001/021..S HIP N AM E ....RNG.BRG..S OG..COG.. 001/021 (E.g: Vessel 01 of 021) curren t or selected Vessel / Total number o f Vessels (max . 256 Vessels) ShipName: Name of the Ship and AIS Type: Cl - A: SOLAS Class-A Ship Cl - B: Leisure Craft Base: Base station SAR : Search and Rescu [...]
-
Seite 19
User Manual 19 Y1 - 03 -0 203 Rev.L 3.1.4 Other Vessel Deta ils This screen show s the Dyna mic, Voyage and Ves sel Related Data, w hich is currently being transmitted by a previousl y selected vessel . Current Time and Selected Vessel Number in Vessel Listing: Time 2:07 ------ ---------- POS: 00 01/0021 Time : The period of time which has elapsed [...]
-
Seite 20
User Manual 20 Y1 - 03 -0 203 Rev.L Reference Point (in meters): This information indi cates the Re ference Point o f the used GPS Antenna onboard the vessel. RefPoint:A190 B120 C10 D<63m A: 190m B: 120m C: 10m D: <63m (means more than 63m in the case o f a very large vessel) Vessels Cargo: Indicates the t ype of cargo on board. N/A or harmle[...]
-
Seite 21
User Manual 21 Y1 - 03 -0 203 Rev.L 3.2 Menu Structure To call up the M ain M enu, press the [Menu] but ton once, and all Sub menus are displ ayed. The cursor position indi cates the selec ted submenu. Menu navi gation is achiev ed by pressing the [Up] or [Down] keys to select, and then by pressing [Enter] to con firm the desi red Submenu selection[...]
-
Seite 22
User Manual 22 Y1 - 03 -0 203 Rev.L 3.4 Sub-Menus Overview 3.4.1 Messages 3.4.2 A IS Status 3.4.3 Voyag e Settings – (User Password Pro tected) N 1 o 19' E 0 o 12' |1>0.10|2>1.30|3>1.80nm | 1. Messages -----| | | + - 1. Write Addressed SRM View | + - 2. Write Broadcast SRM | + - 3. Lock Request | + - 4. Inbox History -----| + -[...]
-
Seite 23
User Manual 23 Y1 - 03 -0 203 Rev.L 3.4.4 Ship Settings – (User Pass word Protected) 3.4.5 Configuration – (User Pass word Protected) 3.4.6 Service Configura tion – (Service Pass w ord Protected) N48^12' E 16^26' |1> N/A|2> N/A|3> N/Anm ************ Ship Settings ************* Call Sign:OEZ1234 / + ShipName :SOLAS 55 / |[...]
-
Seite 24
User Manual 24 Y1 - 03 -0 203 Rev.L Display Settings 3.4.7 Graphical Disp lay Settings 3.5 Sub-Menus Detailed 3.5.1 Messages N 1 o 21' E 0 o 15' |1>0.10|2>1.30|3>1.80nm *********** Display Settings *********** Mode | +- [*] Day Min Max | +---- Brightness:<9> [*********] | + ---- Contrast : 6 [****** ] | | +- [ ] Night Min M[...]
-
Seite 25
User Manual 25 Y1 - 03 -0 203 Rev.L Dynamic Key s: Messages [M5] [Select] Select chosen Submenu [Enter] Confirm M essage Submenu Selection [M8] [Back] Return to Mai n Menu Screen [Up] / [Down] Navi gate Submenu for Selection Writing Message s: This screen prov ides a means to w rite and send mes sages. It is possible to selec t betwee n an Addresse[...]
-
Seite 26
User Manual 26 Y1 - 03 -0 203 Rev.L Dynamic Key s: Messages [M5] [Select] Write M essage to Selected Vessel [Enter] Write M essage to Selected Vessel [M8] [Back] Return to Messa ges Menu b) Using the NAU TICAST Messa ge Editor After selecting a v essel, the M essage Editor is aut omatically displayed. Messages containin g a max imum of 156 cha ract[...]
-
Seite 27
User Manual 27 Y1 - 03 -0 203 Rev.L c) Confirmation o f Sent Addressed M essage The confirma tion screen show s the successful me ssage transmissi on and indicates w hich channels (AIS1 or AIS2) were used. Successful Message Transmiss ion on Channe l AIS1: ?[...]
-
Seite 28
User Manual 28 Y1 - 03 -0 203 Rev.L [...]
-
Seite 29
User Manual 29 Y1 - 03 -0 203 Rev.L e) Confirmation o f Broadcast Sent M essage This Confirmation Screen show s that the messa ge was successfully transmitted on the Broadcast Setting. By pressing [Back] the u ser automatical ly returns to the Messa ge Editor for fur ther Messaging. The [SendTo] returns the user to the Vessel Listin g, with the opt[...]
-
Seite 30
User Manual 30 Y1 - 03 -0 203 Rev.L f) Long Range Interroga tion Mobile, and shore -based stations hav e the ability to interrogate vesse ls and make re quests for informat ?[...]
-
Seite 31
User Manual 31 Y1 - 03 -0 203 Rev.L An LRI has arriv ed; The NAUTICAS T Settings are con figured to Automatic Mod e: Dynamic Key s: LRI in the Inbox History (automatic mode) [M5] [OK] Confirms that LRI has been seen [M8] [Back] Return to Message M enu [M7] [Reply ] Send Addressed Message to LRI sender Upon activation o f the [OK] button , the user [...]
-
Seite 32
User Manual 32 Y1 - 03 -0 203 Rev.L Dynamic Key s: LRI in the Inbox History (manual mode) [M5] [OK] Accept LRI [M7] [Reply ] Send Addressed Message to LRI Sender [M6] [Reject] Reject LR [M8] [Back] Return to Messages M enu g) Inbox History The Inbox History provides a means to readin g incoming messa ges and alarms. The messages ar[...]
-
Seite 33
User Manual 33 Y1 - 03 -0 203 Rev.L Inbox History: Overview of Received M essages and Alarms Message Ty pes: Description ASRM Addressed Safety Related M essage BSRM Broadcast Sa fety Related M essage ALR Alarms (Details see Alarm Type s chapter 5.2) LRI Long Range Inte rrogation Message Status : * Marks a new , unacknowledged mes sage or alarm [...]
-
Seite 34
User Manual 34 Y1 - 03 -0 203 Rev.L ASRM 13:43 PIRA TE ATTACK! 5264 Addressed Safety Related M essage, acknowledged by recipi ent, arrived at 13:43, with tex t ASRM*13:42 HI GH WINDS IN AREA! 5004 Addressed Safety Rel[...]
-
Seite 35
User Manual 35 Y1 - 03 -0 203 Rev.L ASRM: Information Time 17:39 Date 11/26 (mm.dd) POS 01/02 (M essage 01 of 02) Message Ty pe AddressedSRM Status * (not acknow ledged) MMSI o f Sende r 5004 Channel Incoming AIS Chann el ACK Message not yet acknowledged A LR – Reading Incoming A l arms: ALR: Information Time 17:36 Date 11/26 (mm.dd) POS 01/1 Mes[...]
-
Seite 36
User Manual 36 Y1 - 03 -0 203 Rev.L 3.5.2 A IS Status The AIS Status Menu prov ides a variety of information conce rning own vessel set tings, as well as the current A IS status of the o ther vessels, which are displ ayed in the Ves sel Listing. Version Info prov ides detail s of the actual softw are release cur rently installed . Security Lo g tra[...]
-
Seite 37
User Manual 37 Y1 - 03 -0 203 Rev.L Mod.: A IS Transmission Mode AU Autonomous AS Assigned IN Interrogation/Pol led Mode ?? Unknown Used Channel AIS1, AIS2 Syn.: (UTC source ) D UTC direct I UTC indirect B Sync to Base A Sync to mobile w ith the most re ceived stations (Semaphore) RXVe: Total number o f all receiv ed stations by the individual vess[...]
-
Seite 38
User Manual 38 Y1 - 03 -0 203 Rev.L Own Vessel Posi tion: LAT : N 1°18 .901' LON : E 0°12.345' Heading and Ro tation of o wn vessel: Heading :77 o ROT : +5.4 ° IMO-Number and MMSI of own vessel: IMO No. : 9100254 MMSI: 257530700 Name and CallS ign of o wn vessel: ShipName: M YLADY CS: D11233 Vessel Ty pe: Pilot vessel Length and Bea m [...]
-
Seite 39
User Manual 39 Y1 - 03 -0 203 Rev.L c) Version Info This Screen show s the actual So ftware Release which is being run on the NAUTICAST. d) Security Log The Security Lo g is implemented to show the times o f the transponde r. In standard opera tion, this Lo g should not contain any entries. N48^12&apo[...]
-
Seite 40
User Manual 40 Y1 - 03 -0 203 Rev.L 3.5.3 Voyag e Settings (User Pass word Protected) NOTE: The de fault passw ord from the factory is mentioned on your A IS display at the protection foil. (see Appendi x 0 for password in formation).! Before enterin g Voyage Related D ata for initial NAUTICAS T operation, it is adv ised to configure the User Passw[...]
-
Seite 41
User Manual 41 Y1 - 03 -0 203 Rev.L Voyag e Settings Entries After a new User Password has been set, Voy age Settings may be input. A selection is made with the ?[...]
-
Seite 42
User Manual 42 Y1 - 03 -0 203 Rev.L Data Input Modes Voyag e Setting Description Input Modus Cargo Cargo Catego ry Default Setting <Selection > N/A or harmless DG, HS or M P (category A) DG, HS or M P (category B) DG, HS or M P (category C) DG, HS or M P (category D) Draught Maximum present static draught Manual inp ut PoB Number of persons o[...]
-
Seite 43
User Manual 43 Y1 - 03 -0 203 Rev.L 3.5.4 Ship Settings (User Pass word Protected) After a new User Password has been set, the Shi p Settings may be input. The Ship Settings are usually only set once, upon NAUTICA ST initial operation. A selection is made with the cursor buttons [Up] or [Down] for input field selection. The category [...]
-
Seite 44
User Manual 44 Y1 - 03 -0 203 Rev.L Input Modes fo r Ship Setting s Ships Setting Description Input Modus Call Sign Ships Call Sign Manual inp ut Ship Name Ships Name Manual inp ut Length Length of ship Manual inp ut Beam Manual inp ut RefPntExt: Position reference points for ex ternal positioning devi ce (GPS ante[...]
-
Seite 45
User Manual 45 Y1 - 03 -0 203 Rev.L After the Ship Set tings hav e been input and sav ed, this screen appea rs . [Exit] takes the use r back to the Mai n Menu. GPS A ntenna Mounting It is important to input the ex act mounting posi tion of the GPS Antenna on the vessel as this influences the accu racy o f the displayed target in an ECDIS. (Ref.P oi[...]
-
Seite 46
User Manual 46 Y1 - 03 -0 203 Rev.L Sample: Display: CallSi gn = D11233 ShipName = M /V TUGELA Length = 200m Beam = 30m RefPointExt = A170 B30 C15 D15m (location of th e external GPS antenna ) RefPointInT = A171 B 29 C 0 D 30 m (location of th e internal GPS an tenna) ShipType = Tug Setting of the exter nal GPS antenna po sition: A = 170m the dis t[...]
-
Seite 47
User Manual 47 Y1 - 03 -0 203 Rev.L 3.5.5 Transpond er Configuration (User Password Pr otected) The Configura tion Menu all ows the user to alter the hardware-based para meters. User Passw ord Configuration is also undertaken here . A ccessing the Configuration Settings: The Configura tion Menu is User Passw ord protect ed. NOTE: The de fault passw[...]
-
Seite 48
User Manual 48 Y1 - 03 -0 203 Rev.L Accessing the Con figuration Menu with the defaul t User Passw ord Dynamic Key s: Input of Default Use r Pass word to Acces s Configuration [M5] [Enter] Confirm De fault User Password Input [M8] [Exit] Return to Vessel Listing Incorrect User Pas sword Inpu t If the incorrect User Passw ord is input, the scre en b[...]
-
Seite 49
User Manual 49 Y1 - 03 -0 203 Rev.L a) Change User Pas sword (for initial NAUTICAST Operation) It is strongly recommended to chan ge the de fault User Passw ord upon initial NAUTICAST operatio n. A minimum o f 6, a maximum o f 8 characters are allowed. Shoul d the new passw ord include numbers, use the shift key to generate them. Dynamic Key s: Ini[...]
-
Seite 50
User Manual 50 Y1 - 03 -0 203 Rev.L This screen appears if the new User Passwords a re mismatched - i.e. the New User Passw ord and the Repeated New User Passw ord are not identical . In this case, i t is possible to re-input bo th the New and Repe ated User Pas swords again. [Exit] takes the user back to the User Passw ord Input Screen . Dynamic K[...]
-
Seite 51
User Manual 51 Y1 - 03 -0 203 Rev.L b) Region Settin gs A Region is a de fined area , with specific VHF parameters, w hich are sent out by Vessel Traffic Service Stations (VTS), and receiv ed via Di gital Selectiv e Calling ( DSC) or AIS. The screen show s a list o f Regions, and their input sources. W hen the vessel enters into one of th e pre-def[...]
-
Seite 52
User Manual 52 Y1 - 03 -0 203 Rev.L Creating a Ne w Region Parameters for setting up a new Region can be entered and sav ed here. Dynamic Key s: Initial User Pass word Setting [M5] [Save] Confirm Region Data Input [M8] [Back] Return to Region Listing Inputting Region Settings : Mode of Latitude and Lo ngitude Input: Example : 44 Degrees, 13.1234 mi[...]
-
Seite 53
User Manual 53 Y1 - 03 -0 203 Rev.L c) Alarm Settin gs This screen all ows the user to enabl e or disabl e the generation and displ ay of Alarm s. Alarms are display ed in the Alarm Inbox (see Menu 5: Transponde r Configuration, Sub menu 3: Alar m Settings) and on the ECDIS screen. Note : It is highly recommended to enab le the Alarm Fun ction. Dyn[...]
-
Seite 54
User Manual 54 Y1 - 03 -0 203 Rev.L Dynamic Key s: LR Interrogat ion Settings [M5] [Save] Save LRI Settin gs [Up] / [Down] Select Data Fiel d for Configura tion [M6] [Change] Enable or Disabl e selected Field for Interrogation [Enter] Select Data Fiel d for Configura tion [M7] [A ll On] Configure All Data for Interro gation [Left] / [Right] Enable [...]
-
Seite 55
User Manual 55 Y1 - 03 -0 203 Rev.L Dynamic Key s: Reply ing to a LR Interrogation [M5] [OK] Notifies User o f current interrogation [M8] [Back] Return to Vessel Listing [M7] [Reply ] Display Message Editor for LRI Reply Sensor Settings The screen provi des the means to switch the sen sor speeds. It allow s the user to change sensor interfaces fro [...]
-
Seite 56
User Manual 56 Y1 - 03 -0 203 Rev.L Use this menu to set up the data speed 4800/960 0/38400 baud. NOTE: This Con figuration should be done from adv anced user like install ation technicians only. Therefore you will find more de tails in the installat ion manual. During the con figuration process , the NAUTICAST is not operational. GPS Settings (Ser[...]
-
Seite 57
User Manual 57 Y1 - 03 -0 203 Rev.L 3.5.6 Service Configura tion (Serv ice Password Protec ted) The Service Co nfiguration M enu allows ini tial configuration of the Serv ice Password, Passw ord Settings (on/off), MMS I/IMO Numbers and the option of reset ting the NAUTICAST to Factory Settings. The Service Passw ord is required in orde r to enter t[...]
-
Seite 58
User Manual 58 Y1 - 03 -0 203 Rev.L a) Change Serv ice Password This screen prov ides a means to indiv idually configure the Serv ice Password. This password di ffers [...]
-
Seite 59
User Manual 59 Y1 - 03 -0 203 Rev.L b) User Password Set tings Change User Pass w ord Protection : This function all ows the user to enabl e or disabl e the User Passw ord Query Function. For security reasons, it is hi ghly recommended to enable Use r Password Pro tection in order to avoid unauthorized Transpon der operation. After the settin gs ha[...]
-
Seite 60
User Manual 60 Y1 - 03 -0 203 Rev.L c) Changing the MM SI / IMO Nu mbers This screen prov ides a means to chan ge the MM SI and IMO Number s; the input fields are limited to a maximum o f 9 characters. Dynamic Key s: Change MMSI / IMO [M5] [Save] Save MM SI/IMO Number Input [Enter] Navi gate Data Input Fields (up/dow n) [M8] [Back] Return to Submen[...]
-
Seite 61
User Manual 61 Y1 - 03 -0 203 Rev.L After pressing [OK ], the Data Sav ed Screen con firms the Resto re Factory Settings command. Note: The NA UTICA ST has been restored to the Factory Settings! Now please con figure y our: - Ship Settings - Voyag e Settings - User Password - Service Pass word 3.5.7 Display Settings It is possible to choo se from D[...]
-
Seite 62
User Manual 62 Y1 - 03 -0 203 Rev.L Dynamic Key s: Display Settings [M5] [DayNigh t] Switch between Da y or Night Settings [Enter] Switch betwee n Day or Nigh t Settings [M8] [Back] Return to Main Menu [Up] / [Down] Navi gate Input Fields [Left] / [Right] Regulate M odes (min/max) NOTE: The Bri ghtness and Contra st Setting can be di rectly changed[...]
-
Seite 63
User Manual 63 Y1 - 03 -0 203 Rev.L Dynamic Key s: graphical user in terface [M1] filter option on AIS targets in graph ical view FA (hides receiv ed Class A targets) FB (hides receiv ed Class B targets) [M2] Switch betwee n the views from the Navigation Sc reen press the button the 1 st time wi ll lead you to the Rad ar View press it the 2 nd time[...]
-
Seite 64
User Manual 64 Y1 - 03 -0 203 Rev.L pressing [M2] leads to R adar View pressing [M2] leads to Fair way Vie w pressing [M2] leads y ou back to Navigation S creen[...]
-
Seite 65
User Manual 65 Y1 - 03 -0 203 Rev.L 3.6.2 The Radar Vie w This screen provides the user with a commonly used way of representing ship objects on an electronic device. T he Radar View is northern orientated, as indicated by the compass on the very right top of the screen. The Elements o f the Radar Vie w : Own Ship: A symbol for t he own ship is dis[...]
-
Seite 66
User Manual 66 Y1 - 03 -0 203 Rev.L Dynamic Key s: Radar Vie w [M1] Set filter option on AIS Targets [M2] Switch betwee n the views [M3] Show al arm window [M5] Acknowledge alar ms or sa fety related messages (SRM ) [M7] Acknowledge SRM and reply [Menu] Selects the M ain Menu [Up] / [Do wn] / [Left] / [Righ t] Activate the mini mized radar v iew [F[...]
-
Seite 67
User Manual 67 Y1 - 03 -0 203 Rev.L Scrolling Since the outer distanc e ring does not completel y fit into the (rectan gle) display, it is possible to scroll the view from North or South. The maximum scrolling distance is limited to the radius of the outer distance rin g in the current zoom level . The view can be scrolled by 2 steps in each direct[...]
-
Seite 68
User Manual 68 Y1 - 03 -0 203 Rev.L The Minimized Radar Vie w The minimiz ed radar view shows a split screen. On the left hand si de a Shi p List is displayed, on the right hand side a minimized v iew of the Radar View is visi ble. This view will be display ed, if one of the cursor key s is pressed. The difference betw een the minimiz ed, and the l[...]
-
Seite 69
User Manual 69 Y1 - 03 -0 203 Rev.L Ship Details If a t arget is selected by pressing [Enter ], whether in t he Ship List or direc tly in the graphical view, the correspondin g ship details are displayed i nstead of the minimiz ed view. Pressing [Up] o r [Down] scrolls the ship detail li st by line, [Left] or [Right] by page. [M8] returns to th e m[...]
-
Seite 70
User Manual 70 Y1 - 03 -0 203 Rev.L The Elements in the Fair way Vie w: Compass: Shows the current COG. Fairway Lines : The Fairw ay Lines are border lines of a virtual fairway oriented on the actua l course over ground. A IS-Targets : Other AIS targets received via VHF are displayed, if their distance is within t he range of the current zoom lev e[...]
-
Seite 71
User Manual 71 Y1 - 03 -0 203 Rev.L Zoom Level 2 would look l ike this: The Minimized Fairway Vie w The minimiz ed Fairway View shows a split scree n. On the left hand side a Ship List is display ed and on the right hand side a minimiz ed Fairway View is seen. This vi ew is display ed, if one of the cursor keys is pressed . Fairway View [Up] | [...]
-
Seite 72
User Manual 72 Y1 - 03 -0 203 Rev.L The Elements in the Minim ized Fair way View: “Message W rite” Button: By pressing the [M4] button, a message could be sent to that AIS-Target that is currently selected in the Ship List. Ship List: This list show s the same targets as shown in the N avigation Screen. Ship List / Mini mized Vie w Switch: This[...]
-
Seite 73
User Manual 73 Y1 - 03 -0 203 Rev.L 3.6.4 Message and A larm Handling A larms If an alarm occurs , the sy mbol to the right o f the [M 3] button becomes visi ble. Pressing the [M 3] button show s the details of the selected alert. Pressing [ M5] leads to alarm acknow ledgement and the closure of the window as well as the alarm icon disappearing. An[...]
-
Seite 74
User Manual 74 Y1 - 03 -0 203 Rev.L 3.6.5 Configuration of the Grap hical Display General The configuration of the Graphical Display could be accessed over the entry point 8 of the Main Menu. The Configura tion Menu all ows the user to alter the parameters o f the Gra phical Display . A ccessing the Configuration Settings: The Configura tion Menu i[...]
-
Seite 75
User Manual 75 Y1 - 03 -0 203 Rev.L Inside the Graphical Display Setting you can cho ose out of 4 diffe rent Sub-Menus. Sub-Men u Content Fairway View Scale Settings of the Geometry and Scal e of the Fairway View Fairway View Symbols Symbol settin gs of the Fai rway View (also the minimized Fairway View ) Radar View Symbols Symbol settin gs of the [...]
-
Seite 76
User Manual 76 Y1 - 03 -0 203 Rev.L Parameter descr iption: Parameter Description Angle(A) Value range: 2° to 178° Dim(B) The parameter Di m(B) de fines the width o f the fairw ay in percent of the horizon tal line. Please en[...]
-
Seite 77
User Manual 77 Y1 - 03 -0 203 Rev.L The f ollowi ng drawing illustrates the paramete rs from the Fairway View S cale Menu and additionally presents the trans formation proces s from the Rad ar View to the Fai rway View . 10 nm Horizontal line 260° 325. 0° 30° 5 nm 15 nm DIM(B) f 1 f ' 2 Zero-line DIM(C) Dim(D) f 2 0° s A ngle( A) N COG 5 1[...]
-
Seite 78
User Manual 78 Y1 - 03 -0 203 Rev.L Fairway View Symbols Dynamic Key s: Fairway View Symb ols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu The symbols for the own ship and for other tar gets could be selected individual ly. The follow ing symbols are avai lable: Parameter Symbol Standard Standard + Vecto rs Standard [...]
-
Seite 79
User Manual 79 Y1 - 03 -0 203 Rev.L Radar Vie w Symbols Dynamic Key s: Radar Vie w Symbols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu Parameter Symbol Standard Standard + Vecto rs Standard Solid Standard Solid + Vectors Solid Reduced (3x3) Note: Other symbols (i.e.: for a Base Station) are fixed N53°31 E10° 1 |1&[...]
-
Seite 80
User Manual 80 Y1 - 03 -0 203 Rev.L Other Settings Inside this menu it is possible to adjust the graphical v iew to your demand. The availabl e functions cover the topics: o AIS-target filte r settings o Enabling / disabli ng the Auto Zoo m feature w ith max. number of ships o Alarm appearance Dynamic Key s: Other Settings [M5] [Save] Save the sett[...]
-
Seite 81
User Manual 81 Y1 - 03 -0 203 Rev.L Save On all of t he described options inside the Configuration of the Graphical User Interface you could save you r settings by pressi ng the [M2] Button. Dynamic Key s: Other Settings [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu 4 Safety Functions The NAUTICAS T is fitted w ith Sa[...]
-
Seite 82
User Manual 82 Y1 - 03 -0 203 Rev.L 4.1 MOB Person over Board By pressing the MOB button the cu rrent naviga tion position of own vessel and time of incident is [...]
-
Seite 83
User Manual 83 Y1 - 03 -0 203 Rev.L The desired Dis tress Message Text can be sel ected by pressin g the appropria te number on the keyboard. By pressing the [Exi t] button, it is possi ble to escape from this screen w ithout sending th e SRM Messa ge. NOTE: If no message subj ect is selected, the message is automat ically sent as an undesignated d[...]
-
Seite 84
User Manual 84 Y1 - 03 -0 203 Rev.L Dynamic Key s: Send SRM Message [M5] [Send] Send selected SRM Messa ge [M8] [Back] Return to SRM Message Selection Confirmation o f sent SRM: Upon sending the SRM to all v essels the Broadca st Transmission Status is show n. The Broadcast Transmission S tatus Screen show s confirmation o f sent message and all ow[...]
-
Seite 85
User Manual 85 Y1 - 03 -0 203 Rev.L NOTE: The SRM message t ransmission is auto matically repeated every 180 seconds until the [Sto p] button has been pre ssed. Each SRM Message that is sen t out every 180 se conds contains upda ted navi gation information o f own v essel position and actual time. Dynamic Key s: SRM Messa ge View [M5] [Stop] Discon[...]
-
Seite 86
User Manual 86 Y1 - 03 -0 203 Rev.L 5 Troublesho oting 5.1 Reading and understanding Alarms: The NAUTICAS T differentiates be tween Alarm and TXT messa ges. An Alarm informs the user about major system malfunctions and failings in the connected sensors . The Alarm Sta tus informs the user about all ac tive Alarms. The Al arm wil l be disabled and d[...]
-
Seite 87
User Manual 87 Y1 - 03 -0 203 Rev.L 5.2 A larm Codes ID Description Text Cause/Source System Reaction / Remedy 01 AIS: Tx malfunction VHF Antenna, cabling Reaction: The tra nsponder uni t stops transmis sion. If Alarm ID 01 and ID 02 are simultan eously display ed, then a major antenna proble m has arisen. Remedy: Check if the an tenna is AIS co mp[...]
-
Seite 88
User Manual 88 Y1 - 03 -0 203 Rev.L 53 AIS: BATTERY SOON LO W Battery is soon out of capacity Reaction: Ow n ship data is los t after pow ering on/off the sy stem. Remedy: consider to contact Tech nical Support for ad ditional help 55 AIS: PRESS ENTER TO EXIT 1 W /AUTO TX MODE Conditions for enabling 1 Watt TX power are not valid Reaction: Conditio[...]
-
Seite 89
User Manual 89 Y1 - 03 -0 203 Rev.L 6 Contact and Support Informat ion Contact your loca l dealer for NAU TICAST support. Please see our ACR W ebsi te for Servi ce Listing. A CR Electronic s Europe GmbH Mariahilfer Straße 50/2/11 A-1070 Vienna, Austria Tel: +43 (1) 5 237 237 - 0 Fax: +43 (1) 5 237 237 - 150 Email: Technical.Support@acr-europe.com [...]
-
Seite 90
User Manual 90 Y1 - 03 -0 203 Rev.L 7 Appen dix 7.1 Explanation of commonly used Abbrev iations Abbreviation Full Text Abbreviation Full Text A/B (A+B) AIS Channel 1 / AIS Chan nel 2 IntGPS Internal Global Positioning Syste m ACK Acknow ledgement LAT Latitude AddrChM Addressed Channel Managemen t LON Longitude AIS Automatic Identification System LR[...]
-
Seite 91
Bundesrepubli k Deutschland Federal Republic of Germany Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency BUNDESAMT FUR SE ESCH I FFFAH RT UND HYDROC RAPH I E (No & item designation) i '' ","5": [No Ö( l.erTr oeslgrlauon' - x - ^ l=t f .on "- Product Name ' ruedlc[...]
-
Seite 92
EC TYPE EXAMINATION CERTIFICATE No. BSH/461214321220109 Page2o'f 2 Gomponents necessary for operation: Components necessary fof operation Part No. Remarks NAUTICASTTM AIS 2607 Software-Version: 2.0.S1 05 Connection Box 2640 GPS Antenna AIS-A W/SM Coax 2639 VH-3200 VHF Stainless Steel Whip Antenna 91.4cm (36in) 2628 or equivalent The intemal GP[...]
-
Seite 93
[...]
-
Seite 94
[...]
-
Seite 95
Annex to EC QUALTTY SYSTEM (MODULE D) CERTTFTCATE No. BSH I 46131051021 1251 109 BUNDESAMT FüR SEESCHIFFFA}IRT UNI) HYDROGRAPII I E Item Module B Certificate data Registration number date of issue date of expiry Notified Body USCG Approval No. 4.111.2c Position-indicating lights for life-saving appliances: - for lifejackets HL8-10 BSH/46'12/1[...]
-
Seite 96
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konfor mitätserklärung best ätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 f ür m aritime Ausrüstung, geändert durch die EC Council Directive 2002/75/EC vom 2. September 2002 entsprich t un d von der benannten Stelle N[...]
-
Seite 97
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besse r dem im untenstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifies that the mentioned accessory is equal or better to th e equipment stated in the beyond Certif[...]
-
Seite 98
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besse r dem im untenstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifies that the mentioned accessory is equal or better to th e equipment stated in the beyond Certif[...]
-
Seite 99
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besse r dem im untenstehenden Zertifikat ausgewiesenen Zubehör ist. This declaration of conformity certifies that the mentioned accessory is equal or better to th e equipment stated in the beyond Certif[...]
-
Seite 100
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konfor mitätserklärung best ätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 f ür m aritime Ausrüstung, geändert durch die EC Council Directive 2002/75/EC vom 2. September 2002 entsprich t un d von der benannten Stelle N[...]