Adams 22 Bedienungsanleitung

The owner must be certain that all the product information is included with the unit. This information includes the INSTRUCTION BOOKS, the REPLACEMENT P ARTS and the W ARRANTIES. This information must be included to make sure state laws and other laws are followed. PRODUCT INFORMA TION This Instruction Book contains information for several models. [...]

2 F-050414L MURRA Y , INC. T wo Y ear Limited Warranty Murray , Inc. warrants to the original purchaser that this unit shall be free from defects in ma- terial and workmanship under normal use and service for a period of T wo (2) Y ears from the date of purchase; however , this warranty does not cover engines, accessories (such as snow blowers, sno[...]

OWNER’S INFORMA TION 3 F-050414L This instruction book is written for a person with some mechanical ability . Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability . Read and follow these instructions before you use the unit. Know your product[...]

IMPORT ANT 4 F-050414L Safe Operation Practices for W alk-Behind Mowers. This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death. I. General Operation 1. Read, understand, and follow all instruc- tions on the machine and in the [...]

IMPORT ANT 5 F-050414L DO NOT : Do not mow near drop-offs, ditches, or em- bankments. The operator could lose footing or balance. Do not mow excessively steep slopes. Do not mow on wet grass. Reduced footing could cause slipping. III. Children Tragic accidents can occur if the operator is not alert to the presence of children. Children are often at[...]

SAFE MOWING GUIDE 6 F-050414L Every person who uses power equipment must learn the difference between proper and improper use, safe and unsafe mowing prac- tices. Read the next few pages carefully . They can help you learn . T oo often the mow- er user is inexperienced, not properly in- structed, or has not read the Instruction Book and instruction[...]

SAFE MOWING GUIDE 7 F-050414L bruises, or even put out an eye. Often the per- so n hurt by a thrown object is a bystander such as a child, another family member or a neigh- bor . Keep people and pets completely away from the mowing area. Direct the mower’s dis- charge away from areas where people can b e. Planning your mowing pattern has a double[...]

SAFE MOWING GUIDE 8 F-050414L Use only original equipment or approved sub- stitutions as service parts. If you need profes- sional service, select a shop that is an Authorized Service Center for your brand of mower . If you plan to service the unit yourself, follow directions in the Instruction Book. As you mow , remember children and pets are some[...]

SAFE MOWING GUIDE 9 F-050414L While mowing, if you hit a foreign object, stop th e engine. Remove the spark plug wire. Care- fully and thoroughly inspect the mower for damage. Make necessary repairs before re- starting. If the unit starts to vibrate abnormally , stop the engine immediately and check for the cause. Vibration is generally a warning o[...]

STEPS T O FOLLOW 10 F-050414L BEFORE MOWING D Be sure to dress correctly . Wear hard shoes, not sandals or tennis shoes. D Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. D Fill the fuel tank outside. Clean off spilled fuel. D Read and follow the Owner’s Manual, the instructions with[...]

PREP ARA TION 11 F-050414L W ARNING: Before doing any assembly or maintenance to the mower , remove the wire from the spark plug. NOTE: In this instruction book, left and right describe the location o f a part with the operator standing behind the handle. UNP ACKING INSTRUCTIONS Th e mower was fully assembled at the factory . When the mower was put[...]

PREP ARA TION 12 F-050414L HOW TO ADJUST THE HANDLE HEIGHT The handle bracket has two assembly posi- tions. A HIGH and a LOW position (Figure 4). The HIGH position will raise the handle ap- proximately four inches. Figure 4 LOW HIGH 1. Remove the wingnuts and bolts from the right and left handle brackets (Figure 5). 2. T o raise the handle, mount t[...]

PREP ARA TION 13 F-050414L HOW TO PREP ARE THE ENGINE ENGINE DOES NOT CONT AIN OIL OR GASOLINE Fill the engine with the proper amount of oil. See the engine manufacturer ’s instructions for the type of gasoline and oil to use. Before you us e the unit, read the information on safety , o p- eration, maintenance, and storage. W ARNING: Follow the e[...]

OPERA TION 14 F-050414L ENGINE ST OP LEVER Release the engine stop lever and the engine and the blade will automatically stop. T o run the engine, hold the engine stop lever in the Operating position (Figure 8). Before you start the engine, operate the en- gine stop lever several times. Make sure the cable moves easily . Figure 8 Engine Stop Lever [...]

MAINTENANCE 15 F-050414L ENGINE MAINTENANCE Us e the following maintenance section to keep your unit in good operating condition. All the maintenance information for the engine is in th e “Engine Instruction Book”. Before you start the engine, read this book. W ARNING: Before you make an inspection, adjustment (except carburetor), or repair , s[...]

MAINTENANCE 16 F-050414L BLADE SERVICE W ARNING: Before you inspect the blade or the blade adapter , disconnect the wire to the spark plug. If the blade hits an object, stop the engine. Disconnect the wire to the spark plug. Check the unit for damage. Frequently check the blade for wear or dam- age such as cracks. Frequently check the bolt that hol[...]

MAINTENANCE 17 F-050414L 5. Make sure the blade is balanced. Use a screwdriver and hold the blade parallel to the ground as shown. A blade that is bal- anced will stay parallel to the ground. If t he blade is not balanced, the heavy end will rotate toward the ground. Sharpen the heavy end until the blade is balanced. 6. A new blade will cut better [...]

TROUBLE SHOOTING CHART 18 F-050414L The Engine will not start. 1. Make sure the fuel tank is filled with clean gasoline. Do not use old gasoline. 2. On a cold engine, push the primer button (optional on some models). For the number of times required to push the primer button, see the engine manufacturer’s instructions. 3. Make sure the wire for t[...]

19 F-050414L[...]

HANDLE - BRIGGS & STRA TT ON MODELS 20 F-050414L 1 2 13 16 12 7 4 3 15 KEY NO. DESCRIPTION P ART NO. KEY NO. DESCRIPTION P ART NO. 1 Handle, Upper (Black) Handle, Upper (Gray) 1 101556E701 1 101556E724 2 Handle, Lower (Black) Handle, Lower (Gray) 1 102087E701 1 102087E724 3 Bolt 002x77 4 Knob, Plastic 071294 7 Locknut 15x1 16 12 Guide, Rope 071[...]

HANDLE - TECUMSEH ENGINE MODELS 21 F-050414L 1 2 8 9 8 6 7 4 10 KEY NO. DESCRIPTION P ART NO. KEY NO. DESCRIPTION P ART NO. 1 Handle, Upper (Black) Handle, Upper (Gray) 1 101556E701 1 101556E724 2 Handle, Lower (Black) Handle, Lower (Gray) 071 137E701 071 137E724 4 Lever , Stop 1 101964E700 5 Knob, Plastic 071294 6 Engine Stop Cable 1 102041 7 Guid[...]

MODELS WITH ST ANDARD WHEELS 22 F-050414L 1 2 3 5 6 4 7 9 5 6 12 13 14 15 16 17 18 19 20 21 22 23 24 11 28 27 10 10[...]

MODELS WITH ST ANDARD WHEELS 23 F-050414L KEY NO. DESCRIPTION P ART NO. 1 Engine ‡ ------ 2 Housing 776022 3 Height Adjuster , Left Rear (8” Wheels) Height Adjuster , Left Rear (7” Wheels) 672641 672637 4 Knob 071495 5 Wheel and T ire # ------ 6 Locknut, Flange 015x84 7 Bolt, Carriage 002x81 9 Bolt, Engine 0025x6 10 Nut 015x68 1 1 Height Adju[...]

WHEELS AND TIRES 24 F-050414L Look at the illustrations. Select the wheel and the tire you want and order from the following chart. A D B C WHEEL SIZE & TYPE A B C D 6-inch Plastic, White 672788 ---- ---- ---- 6-inch Plastic, Gray 672789 ---- ---- ---- 7-inch Plastic, White 020270 ---- ---- ---- 7-inch Plastic, Gray 071597 ---- ---- ---- 8-inch[...]

25 F-050414L[...]

26 F-050414L[...]

27 F-050414L[...]

HOW TO ORDER REP AIR P ARTS F-050414L Only use a factory repair part. Repair parts, except for the engine or the transmission, are available from the store where the unit was purchased, a service shop recommended by the store, or an authorized service shop found in the yellow pages of the telephone directory . If you cannot get a repair part or ser[...]