Adder Technology AVM216MP Bedienungsanleitung

AdderView AdderView MATRIX MP MATRIX MP Installation and Use Part Model AVM208MP AdderView Matrix – 2 user ports and 8 computer ports AVM216MP AdderView Matrix – 2 user ports and 16 computer ports Intelligent Server Management An electronic version of this manual may be downloaded from www.adder.com[...]

AdderView MATRIX Installation and Use Page 1 About this manual AdderView MATRIX MP - Installation and Use First edition (October 2003) (c) 2003 Adder Technology Ltd. Part No. ADD0051/1 www.adder.com All rights reserved. Whilst every precaution has been taken in the preparation of this manual, Adder Technology Ltd assumes no responsibility for error[...]

AdderView MATRIX Installation and Use Page 2 replace it free of charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s control. Also Adder will not be responsible for any loss, damage or injury arising directly or indirectly from the use of this product. Adder’s total liability under the terms of this war[...]

AdderView MATRIX MP Installatio n and Use Page 3 Contents 1. Introduction ..................................................................................... 5 1.1 Key features and benefits ...................................................................... 7 1.2 AdderView MATRIX MP package contents ............................................[...]

AdderView MATRIX MP Installatio n and Use Page 4 4. Using the AdderView MATRIX MP ............................................... 39 4.1 Rear panel special function switches ..................................................... 39 4.2 Power supply connections and indicators ............................................. 39 4.3 USER display and key s[...]

AdderView MATRIX MP Installatio n and Use Page 5 1. Introduction Thank you for purchasing the Adder AdderView MATRIX MP. Your AdderView MATRIX MP is a very high performance Keyboard, Video monitor and Mouse (KVM) sharing device which supports a wide range of computer hardware and software platforms. The AdderView MATRIX MP supports multiple users a[...]

AdderView MATRIX MP Installatio n and Use Page 6 Adder explains: What does KVM stand for? Throughout this manual the abbreviation KVM is used to refer to the combination of a Keyboard, Video monitor and Mouse that is used to access a computer. A KVM console usually consists of a keyboard, monitor and mouse although sometimes only a keyboard and mon[...]

AdderView MATRIX MP Installatio n and Use Page 7 1.1 Key features and benefits Enables many computers to be independently controlled by two users. Enables desktop and laptop PCs, Sun (USB), Sun (8-pin), Mac (USB), SGI, Alpha and RS/6000 computers to be controlled from a common KVM console. USB keyboard and mouse support enables KVM console devices [...]

AdderView MATRIX MP Installatio n and Use Page 8 Sup port for up to 16 user access profiles and 512 named computers. The colours and position of the OSD menu may be changed by each user. OSD routing status window shows the computers that are currently being controlled by the KVM consoles. Supports three computer control modes - Exclusive, Shared an[...]

AdderView MATRIX MP Installatio n and Use Page 9 Auto-scan list feature enables scanning of selected computers. 1.2 AdderView MATRIX MP package contents AdderView MATRIX MP. Power supply suitable for your country. 6 x stick on self-adhesive rubber feet. A CD-ROM containing this manual (in PDF format). 1.3 AdderView MATRIX MP rackmount kit for model[...]

AdderView MATRIX MP Installatio n and Use Page 10 1.5 Product information Fig. 1 - AdderView MATRIX MP 208 and 216 models viewed from the front[...]

AdderView MATRIX MP Installatio n and Use Page 11 Fig. 2 - AdderView MATRIX MP 208 and 216 models viewed from the rear[...]

AdderView MATRIX MP Installatio n and Use Page 12 2. Installation Adder explains: Flexible configuration The AdderView MATRIX MP has many ports for connection to computers, keyboards, mice and monitors. There are no restrictions placed upon which ports are connected to devices and you can leave any of the ports disconnected if you wish. You do not [...]

AdderView MATRIX MP Installatio n and Use Page 13 - PC PS/2 or RS232 two button mouse driver (any manufacturer). - Microsoft mouse driver (including IntelliMouse). - Logitech mouse driver (including two button, three button and wheel mouse). You may also need one or more of the following adapters. These adapters may be obtained from your AdderView [...]

AdderView MATRIX MP Installatio n and Use Page 14 connect. This will avoid the need to use key combinations to create any missing keys (e.g. the Stop, Again, Props and Undo keys for Sun systems). Sun keyboards have more keys than standard PC keyboards which have more keys than Mac keyboards and so if you are controlling a mixture of computers that [...]

AdderView MATRIX MP Installatio n and Use Page 15 Figure 3 - AdderView MATRIX MP cables. See appendix A for part codes and ordering information To connect PCs with serial mouse connections and AT style keyboard connections use the PC cable together with the adapters specified in appendix A. If you have an existing 6-pin mini-DIN to 9-pin serial ada[...]

AdderView MATRIX MP Installatio n and Use Page 16 To connect Sun computers with older style 13W3 video connections you will need to use the Sun cable together with a 13W3 to 15 way D-type video adapter. The AdderView is now ready for connection to the mains using the mains power adapter supplied. It is important to apply power to the AdderView firs[...]

AdderView MATRIX MP Installatio n and Use Page 17 AdderView emulates Microsoft compatible serial, IntelliMouse and PS/2 mice, so ensure that your PC software is configured for a Microsoft mouse of the correct type. Refer to the list of supported drivers in section 2.1. 2.5 Structuring your AdderView MATRIX MP installation A single AdderView MATRIX [...]

AdderView MATRIX MP Installatio n and Use Page 18 number of KVM links that you install defines the number of simultaneous uses that are supported. The MATRIX MP unit should be used as the master (i.e. at the top of the tree). All other levels should be MATRIX products. Keep all cascade cables as short as possible. The video quality is maximised by [...]

AdderView MATRIX MP Installatio n and Use Page 19 The following diagrams show some typical AdderView MATRIX MP installations. Fig. 4 - A typical installation using a single AdderView MATRIX MP 208[...]

AdderView MATRIX MP Installatio n and Use Page 20 Fig. 5 - A cascaded application using multiple AdderView MATRIX units[...]

AdderView MATRIX MP Installatio n and Use Page 21 2.6 Maximising the video quality The AdderView MATRIX MP supports very high bandwidth video signals and resolutions up to 1900 x 1440 pixels. It regenerates the video signals using wideband amplifiers in order to minimise any loss of video quality. All video cables introduce distortion onto the vide[...]

AdderView MATRIX MP Installatio n and Use Page 22 2.7 Other useful installation information Intelligent cables – The USB and Sun cables contain miniature active circuits that are moulded into the ends of the cable assembly. These circuits intelligently provide signals to your computers that make them think that a keyboard and mouse are continuous[...]

AdderView MATRIX MP Installatio n and Use Page 23 enable the mouse when the PC is initially booted. If you have switched off your AdderView or you are attempting to ‘hot plug’ it into a system that is already running, you may be able to restore lost mouse movement using the AdderView's mouse restoration functions. Mouse restoration functio[...]

AdderView MATRIX MP Installatio n and Use Page 24 3. Configuring the AdderView MATRIX MP 3.1 Configuration summary The AdderView is configured using the on-screen menu system which is activated by default when you first power on the system. It may also be accessed by using the keyboard 'hotkeys' (see section 4.8) or by using the AdderView[...]

AdderView MATRIX MP Installatio n and Use Page 25 Step 3 - Create user accounts Login to the AdderView using the ADMIN account and add user profiles and passwords for each of the system users (see section 3.4). The AdderView supports up to 16 user profiles. Step 4 - Add / edit names to identify your computers Whilst you are logged into the AdderVie[...]

AdderView MATRIX MP Installatio n and Use Page 26 To switch on the password security system: From the main on-screen menu press F1 for MORE MENUS . Select SETUP OPTIONS from the menu. Move the menu bar over the SECURITY option. Press SPACE BAR to enable security. Press ESC to quit from the menu. 3.3 Setting an ADMIN password The AdderView MATRIX MP[...]

AdderView MATRIX MP Installatio n and Use Page 27 3.4 Creating and editing user accounts To create user accounts: Ensure that you are logged on as the ADMIN user. From the main on-screen menu press F1 for MORE MENUS . Select EDIT USER LIST from the menu. Press INSERT to add a new user. Type in the name of the new user and press RETURN or ENTER . Ty[...]

AdderView MATRIX MP Installatio n and Use Page 28 MATRIXs then the port numbers will be four, six or eight characters long depending upon whether you have two, three or four levels of cascade (see figure 7). See the end of this section and section 4.10 for an explanation of how the port numbers are constructed. The AdderView MATRIX MP supports up t[...]

AdderView MATRIX MP Installatio n and Use Page 29 Creating entries for computers connected to cascaded AdderViews You can cascade AdderView MATRIX MP units using one or two KVM links. Section 2.5 explains the rules that you must follow when installing a AdderView cascade. The number of cascade links that you install determines the number of simulta[...]

AdderView MATRIX MP Installatio n and Use Page 30 Fig. 6 - Creating menu entries for computers that are connected to cascaded AdderViews[...]

AdderView MATRIX MP Installatio n and Use Page 31 Fig. 7 - Possible cascade groups and their associated names 3.6 Setting the SETUP OPTIONS and GLOBAL PREFERENCES The SETUP OPTIONS and GLOBAL PREFERENCES are system operating parameters that apply to the whole system rather than to individual users. These may only be setup or changed by the system a[...]

AdderView MATRIX MP Installatio n and Use Page 32 3.6.1 SECURITY Accessed from menu: SETUP OPTIONS Settings: DISABLED, ENABLED With security disabled there is no requirement for users to login to the system. All users have full access to all the connected computers and full administration rights. With security enabled, users are required to login t[...]

AdderView MATRIX MP Installatio n and Use Page 33 quickly select a chosen computer without activating the on-screen menu. See section 4.8 for full details on using keyboard hotkeys to control the AdderView. We do not normally recommend that you disable the hotkeys but if you choose to do this then you will need to access the on-screen menu using th[...]

AdderView MATRIX MP Installatio n and Use Page 34 3.6.6 AUTOMATIC LOGOUT Accessed from menu: SETUP OPTIONS Settings: DISABLED, ENABLED The AdderView enables you to restrict access to your computers on a login basis. If a user forgets to logout when they have finished accessing the AdderView then the user console may unintentionally be left with ful[...]

AdderView MATRIX MP Installatio n and Use Page 35 Keyboard Country Codes Country Code C ountry Code Arabic 01 Persian (Farsi) 20 Belgian 02 Poland 21 Canadian-Bilingual 03 Portugese 22 Canadian-French 04 Russian 23 Czech Republic 05 Slovakian 24 Danish 06 Spanish 25 Finnish 07 Swedish 26 French 08 Swiss/French 27 German 09 Swiss/Germ an 28 Greek 10[...]

AdderView MATRIX MP Installatio n and Use Page 36 set to blank the screen after no keyboard or mouse activity has been detected for a selected timeout period. If preferred, the user can blank the screen manually by selecting channel '0' using the keyboard hotkeys or by pressing ESC from the login screen. 3.6.10 AUTOSCAN MODE Accessed from[...]

AdderView MATRIX MP Installatio n and Use Page 37 When all the computers that you wish to scan have a star to the right hand side of their name, press RETURN or ENTER to save the selections. The selected computers will be autoscanned in alphabetical order when you activate autoscan mode (when the SCAN LIST option is selected). 3.6.11 AUTOSCAN PERIO[...]

AdderView MATRIX MP Installatio n and Use Page 38 3.6.14 RS232 Mouse Type Accessed from menu: GLOBAL PREFERENCES Settings: INTELLIMOUSE, 2 BUTTON, 3 BUTTON These setting control the type of RS232 mouse that the AdderView reports to computers. All the necessary conversions are dealt with automatically with the AdderView. The IntelliMouse setting sen[...]

AdderView MATRIX MP Installatio n and Use Page 39 4. Using the AdderView MATRIX MP This section explains the general operation of the AdderView MATRIX MP. We recommend that you read this section before starting to use the product. 4.1 Rear panel special function switches Before powering on the AdderView ensure that the two option switches on the re[...]

AdderView MATRIX MP Installatio n and Use Page 40 4.4 COMPUTER display and key switch The COMPUTER key selects the computer port that is to be connected to the user port that is currently displayed on the green USER display (see figure 1). Pressing the key will cause the red COMPUTER display to change to the next available computer port in numerica[...]

AdderView MATRIX MP Installatio n and Use Page 41 4.5 Activity indicators The AdderView MATRIX MP has a front panel activity indicator for each user port (see figure 1). The indicator will flash when keyboard or mouse data is received by the AdderView. These indicators provide a useful confirmation that the keyboards and mice connected to the Adder[...]

AdderView MATRIX MP Installatio n and Use Page 42 Action of the COMPUTER key if no security has been set and the front panel controls are enabled Action of the COMPUTER key if the front panel controls are enabled, security has been set and the current logged in user only has access to computer ports 1,3 and 7 Action of the COMPUTER key if the front[...]

AdderView MATRIX MP Installatio n and Use Page 43 name and password to access the AdderView. 4.8 Keyboard hotkeys AdderView MATRIX MP can be conveniently controlled using special keyboard hotkey combinations. These hotkey combinations can be used to select computers and perform a number of other useful functions. All of the hotkey control commands [...]

AdderView MATRIX MP Installatio n and Use Page 44 ‘HOTKEYs’ and ‘1’ - selects channel 1 ‘HOTKEYs’ and ‘2’ - selects channel 2 ‘HOTKEYs’ and ‘3’ - selects channel 3 ‘HOTKEYs’ and ‘4’ - selects channel 4 ‘HOTKEYs’ and ‘5’ - selects channel 5 ‘HOTKEYs’ and ‘6’ - selects channel 6 ‘HOTKEYs’ and ‘7?[...]

AdderView MATRIX MP Installatio n and Use Page 45 be selected. For example HOTKEYs + 0 10216 would select port 1 (01) on the current AdderView, port 2 (02) on the next cascaded AdderView and port 16 on the last AdderView. Examples of common hotkey sequences (assuming CTRL + ALT hotkey option): To select channel 2: press ba ba 2 2 release 2 2 ba ba [...]

AdderView MATRIX MP Installatio n and Use Page 46 4.9 Selecting computers using the mouse Computers may conveniently be selected using a three button mouse. In order to switch to the next computer simply hold down the central mouse button (the wheel mouse button on an IntelliMouse) and click on the left hand mouse button to select the next computer[...]

AdderView MATRIX MP Installatio n and Use Page 47 4.10 Selecting computers using the on-screen menu You can conveniently select computers by name using the AdderView's on-screen menu. For systems with many computers this is the recommended method of computer selection. The on-screen menu is called up by pressing the ‘HOTKEYs’ and the ‘M?[...]

AdderView MATRIX MP Installatio n and Use Page 48 To connect to a computer, place the menu bar over the computer name using a combination of the up and down cursor keys and the page up / page down keys. You may also use the wheel on a wheel mouse to move the menu bar up and down if you have enabled mouse control (see section 3.6.8).[...]

AdderView MATRIX MP Installatio n and Use Page 49 To select the computer with SHARED access press: e e or f f When a computer is selected in SHARED mode, the computer’s video picture will be displayed on all the KVM consoles that are connected to that computer. Only one user will have control of the computer’s keyboard and mouse at any one time[...]

AdderView MATRIX MP Installatio n and Use Page 50 You may also use a 3-button mouse or wheel mouse to select a computer if you have enabled mouse control (see section 3.6.8). To select a computer in SHARED mode use the left hand mouse button ( ) whilst the menu bar is positioned above the required computer name. To escape without selecting a new co[...]

AdderView MATRIX MP Installatio n and Use Page 51 AdderView indicates an unsuccessful connection 4.11 The reminder banner Normally the AdderView will display a discreet computer name reminder banner that reminds you which computer you are connected to. This banner will normally appear at the top of the screen in a central location and may optionall[...]

AdderView MATRIX MP Installatio n and Use Page 52 4.12 Setting the USER PREFERENCES The USER PREFERENCES are system operating parameters that are independently selectable for each user. From the main menu press F1 for MORE MENUS . Use the cursor keys to position the menu bar over USER PREFERENCES Press ENTER or RETURN to view the preferences. Use t[...]

AdderView MATRIX MP Installatio n and Use Page 53 screen in a central position but may be moved as required (see section 4.8) 4.12.3 REMINDER COLOUR Accessed from menu: USER PREFERENCES Settings: BLUE/TRANS, PINK/TRANS, BLUE/WHITE, WHITE/RED You may select the colour of the reminder banner. The BLUE/TRANS and PINK/TRANS select blue or pink text wit[...]

AdderView MATRIX MP Installatio n and Use Page 54 will clear all the computer and user names and set all parameters back to the factory defaults. To avoid activating this function by accident the administrator must confirm the reset instruction by pressing F8. See section 4.19 for details on using the SEND DATA TO RS232 PORT and READ DATA FROM RS23[...]

AdderView MATRIX MP Installatio n and Use Page 55 Although it is theoretically possible to select computers on cascaded units by pressing the hotkeys and then typing in the port address this would be highly confusing for users and is not generally recommended. Consequently it is normally advisable to use the on-screen menu to select computers on ca[...]

AdderView MATRIX MP Installatio n and Use Page 56 4.17 Using the AdderLink extender Refer to the installation guide provided with your AdderLink extender. When using an AdderLink extender we highly recommend that you set the AdderLink's hotkeys to be different to the AdderView's hotkeys to avoid any confusion 4.18 What to do if you forget[...]

AdderView MATRIX MP Installatio n and Use Page 57 ADMIN user. The file that is used to store the configuration settings has the additional advantage that it can be loaded into an Excel spreadsheet and edited to make changes to computer names and access rights. This edited information may then be downloaded back to the AdderView. To save the menu na[...]

AdderView MATRIX MP Installatio n and Use Page 58 USERS ADMIN Alan Jim Sue Test PASSWORDS password letmein hello logmein Test COMPUTERS PORT Admin PC 2103 1 1 1 1 Alan's System 2102 1 1 1 Comms Server 3 1 1 Comms PC 4 1 1 1 1 Gateway 1 8 1 Gateway 2 5 1 Test System 15 1 1 Web Browser 9 1 1 1 To restore the saved / edited menu and configuration[...]

AdderView MATRIX MP Installatio n and Use Page 59 No handshaking is implemented but valid command characters will be echoed back to the sender. The top nibble (4 bits) of the command byte defines the user port that is to be switched (1=port 1, 2=port 2). The bottom nibble defines the computer port that the user port is to be switched to (e.g. 0=por[...]

AdderView MATRIX MP Installatio n and Use Page 60 Sun keyboard). If you are using a Sun style controlling keyboard, the equivalent key mappings are: Sun keyboard IBM 104/105-key Apple keyboard keyboard Left Control Left Ctrl Left Control Left Diamond ( ) Left Win Start ( ) Left Command ( ) Left Alt Left Alt Left Op tion (alt) Alt Graph Right Alt or[...]

AdderView MATRIX MP Installatio n and Use Page 61 5. Upgrading the AdderView's firmware The AdderView MATRIX MP uses flash memory technology which enables the firmware code to be upgraded by the user. New keyboards, mice operating systems and drivers are being launched all the time. From time to time the AdderView's firmware will be updat[...]

AdderView MATRIX MP Installatio n and Use Page 62 To perform a flash upgrade on the AdderView MATRIX MP: Step 1 - Prepare your computers Ensure that you have saved any important work on the connected computers. The AdderView MATRIX MP can be upgraded whilst attached to live systems but remember that the mouse connections will probably need to be re[...]

AdderView MATRIX MP Installatio n and Use Page 63 Step 4 - Power off the AdderView MATRIX MP Remove the power from the MATRIX MP. Step 5 - Power on the AdderView with the UPGRADE switch ON Attach the power adapter to the AdderView whilst the UPGRADE switch is ON. The green USER display should now show a lower case 'u'. This indicates that[...]

AdderView MATRIX MP Installatio n and Use Page 64 3) A data file that tells the upgrade program (XPROMP.EXE) which binary code files (HEX files) to download to the AdderView MATRIX MP and where to put each file. Theoretically this DAT file can be modified so that only certain processors are upgraded but do not do this unless specifically instructed[...]

AdderView MATRIX MP Installatio n and Use Page 65 Follow the instructions given on the screen to perform the upgrade. When the upgrade is complete the program will confirm that the upgrade has been successful and then quit. Step 7 - Switch the UPGRADE key to the OFF position and cycle the power Switch the UPGRADE switch on the rear of the AdderView[...]

AdderView MATRIX MP Installatio n and Use Page 66 6. Special features of the MATRIX MP 6.1 Synchronising AdderView MATRIX MPs for multiple video head applications Multiple AdderView MATRIX MPs may be connected together so that they operate in a synchronised manner. Synchronised operation is useful for applications that require multiple video signal[...]

AdderView MATRIX MP Installatio n and Use Page 67 Synchronised AdderViews used for a dual head video switching application The pinout of the RS232 synchronisation cable is as shown below.[...]

AdderView MATRIX MP Installatio n and Use Page 68 The pinout for a “daisy chain” RS232 cable for more than 2 units is shown below: 6.2 Logging access activity By connecting the AdderView’s serial port to a computer, a time stamped log of the AdderView’s activity can be generated. This is useful for applications where it is necessary to keep[...]

AdderView MATRIX MP Installatio n and Use Page 69 { activity_log_destination} is the file name where the log is to be stored or the word PRINT if the log is to be printed on a printer attached to the computer’s parallel port. LPT1 { com_port} is the computer’s serial port that is connected to the AdderView. Options are 1 (for COM1) or 2 (for CO[...]

AdderView MATRIX MP Installatio n and Use Page 70 Appendix A. Cable and connector specifications IMPORTANT NOTE The maximum cable lengths supported vary widely between devices and cables. It may be possible to use cables that are longer than those specified below with certain PCs and peripherals but this cannot be guaranteed. If you experience prob[...]

AdderView MATRIX MP Installatio n and Use Page 71 Part code Description Length VKVM-1M Cable for PC connection (PS/2 style) 1 metre VKVM-1M-AT Cable for PC connection (AT style) 1 metre VKVM-2M Cable for PC connection (PS/2 style) 2 metres VKVM-2M-AT Cable for PC connection (AT style) 2 metres VKVM-5M Cable for PC connection (P S/2 style) 5 metres [...]

AdderView MATRIX MP Installatio n and Use Page 72 Cables for connection to Sun computers with 8-pin keyboard/mouse connectors: Cables to Sun computers with 8 pin mini-DIN keyboard/mouse connectors may be up to 20 metres long. If you use an extension cable then this should be added to the MATRIX MP end of the cable. Part code Description Length CCSU[...]

AdderView MATRIX MP Installatio n and Use Page 73 Cables for connection to computers with USB keyboard/mouse connections: Cables to computers with USB keyboard/mouse connectors may be up to 20 metres long. If you use an extension cable then this should be added to the MATRIX MP end of the cable as the USB end can only be extended by up to 5 mertres[...]

AdderView MATRIX MP Installatio n and Use Page 74 Adapters: VSA1 mouse adapter - This is required if you wish to connect a computer that has a 9-pin serial mouse connection: Cables should be no longer than 30 metres. NOTE - There are several common wiring specifications for 6-pin mini-DIN to 9-pin serial adapters. If you have an adapter that has be[...]

AdderView MATRIX MP Installatio n and Use Page 75 VSA2 keyboard adapter - If your PC has a 5-pin DIN AT style keyboard connector you will need a PS/2 to AT keyboard adapter 6-pin mini-DIN female to 5-pin DIN male. VSA7 video adapter - If your Sun computer has a 13W3 video connector then you will need to fit a 15-way D-type to 13W3 video adapter ont[...]

AdderView MATRIX MP Installatio n and Use Page 76 Appendix B. Problem Solving Problem: Poor video quality with smearing fuzziness or ripple. Action: Use screened coaxial video cables to connect your devices to the AdderView. For more help with problems visit the Adder Technology website at www.adder.com.[...]

AdderView MATRIX MP Installatio n and Use Page 77 Notes[...]

AdderView MATRIX MP Installatio n and Use Page 78 Notes[...]

www.adder.com www.adder.com AdderView AdderView MATRIX MP MATRIX MP Installation & Use[...]