Deutsch dropdown-ico

ADTRAN 6000 Series Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung ADTRAN 6000 Series an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von ADTRAN 6000 Series, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung ADTRAN 6000 Series die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung ADTRAN 6000 Series. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung ADTRAN 6000 Series sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts ADTRAN 6000 Series
- Den Namen des Produzenten und das Produktionsjahr des Geräts ADTRAN 6000 Series
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts ADTRAN 6000 Series
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von ADTRAN 6000 Series zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von ADTRAN 6000 Series und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service ADTRAN finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von ADTRAN 6000 Series zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts ADTRAN 6000 Series, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von ADTRAN 6000 Series widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    612806420L1- 1F November 2005 TRACER 6000 SERIES Integrated System Manual 12806410L2A TRACER 6410 2.4 GHz (High Power) System (Plan A) 12806410L2B TRACER 6410 2.4 GHz (High Power) System (Plan B) 12806420L1A TRACER 6 420 5.8 GHz Syste m (Plan A) 12806420L1B TRACER 6 420 5.8 GHz Syste m (Plan B) 12806420L2A TRACER 6420 5.8 GHz (High Power) System (P[...]

  • Seite 2

    Trademarks TRACER 6000 Series Inte grated System Manual 2 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F T rademarks Any brand names an d product names included in th is manual are trademarks, registered trademarks, or trade names of their respective holders. T o the Holder of the Manual The content s of this manual are current as o f the da te of p[...]

  • Seite 3

    TRACER 6000 Series Integrated System Manual Revision History 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 3 Revision History Document Revision Date Description of Changes A December 2004 Initial release of manual to include the TRACER 6420 (5.8 GHz integrated system) an d the Quad T1 and Ethernet Switch modules. B March 2005 Include E1 and E1 bre [...]

  • Seite 4

    Safety Instruc tions TRACER 6000 Series Integr ated System M anual 4 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Safety Instructions When using your teleph one equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this prod uct near water , such as a bathtub, wash b[...]

  • Seite 5

    TRACER 6000 Series Integrated System Manual FCC-Required Information 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 5 FCC-Required Information Federal Communications Co mmission Radio Frequency Inte rference S t atement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rul[...]

  • Seite 6

    FCC-Required Information TRACER 6000 Series Inte grated System Manual 6 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F FCC Output Power Restrictions The FCC does not require licensing to implement th is device. License-free oper ation in the industrial, scientific, and medical band is documented in FCC Rules Part 15.247. It is th e responsibility of[...]

  • Seite 7

    TRACER 6000 Series Integrated System Manu al Warranty and Customer Service Information 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 7 W arranty , Customer Serv ice, Product Support Info rmation, and T raining ADTRAN will repair and return this prod uct within the warranty period if it does not meet its published specifications or fails while in se[...]

  • Seite 8

    Warranty and Customer Serv ice Informatio n TR ACER 6000 Series Integrated System Manual 8 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Post-Sale Support Y our reseller should serve as the firs t point of con tact for support. If ad ditional support is n eeded, the ADTRAN Support website provide s a variety of supp ort services such as a searchabl[...]

  • Seite 9

    TRACER 6000 Series Integrated System Manual Table of Contents 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 9 T able of Content s Section 1 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 This sectio n of ADTRAN’s T RACER 6000 Series Integrated System Manual is designed for use by network engi[...]

  • Seite 10

    Table of Con tents TRACER 6000 Series In tegrated Syste m Manual 10 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F[...]

  • Seite 11

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 11 SYSTEM DESCRIPTION This section of ADTRAN’s TRACER 60 00 Series In tegrated Syste m Manual is d esigned for use by network engineers, planne rs, and designers for over view information about the TRACER 64x0 systems. It contains general info rmation and describes physi cal and operational concepts, [...]

  • Seite 12

    Section 1 System Descriptio n TRACER 6000 Ser ies In tegr at ed Syste m Manu al 12 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. SYSTEM OVERVIEW The TRACER 64x0 provides license-free scalable co nnectivity for service providers and corporate networks. These radios fea tur e two modular network interfac e po rts that can accommod ate v arious com[...]

  • Seite 13

    TRACER 6000 Series Integrated System Manual Section 1 System Description 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 13 • Point-to-point transmission, up to 30 miles • 1U high unit for easy rack moun ting A vailable Interface Modules • Quad T1 Module (P/N 1280040L1 ) • Quad E1 Module with 120 Ω Interface (P/N 1280044L1) • Quad E1 Modu[...]

  • Seite 14

    Section 1 System Descriptio n TRACER 6000 Ser ies In tegr at ed Syste m Manu al 14 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F[...]

  • Seite 15

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 15 MICROWAVE PATH ENGINEERING BASICS Explains the basics of analyzing a wireless micr owave link or path. Defines significant p arameters and makes several installa tion recommend ations. C ONTENT S Line-of-Sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 16

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 16 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. LINE-OF-SIGHT The TRACER 6410 and TRACER 6420 systems are designed for operation in the license-free 2.400 to 2.483 GHz and 5.725 GHz t o 5.850 GHz industrial, scientific, and medical (ISM) bands, respectiv[...]

  • Seite 17

    TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 17 where the variables in the equations are defined as P R received power (dBm) P sens receiver sensitivity (dBm) P T transmitted power (adjustable up to 20, 24, or 27 dBm maximum – dependi ng on product) G T trans[...]

  • Seite 18

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 18 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 1 illustrates a wireless link co nfiguration containing all the pa rameters necessary for the power budget analysis. Figure 1. Example Microwave Path with Parameters The following sections fur ther disc[...]

  • Seite 19

    TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 19 Table 1. Antenna Gain for Given Dish Diameters with k = 0.55 (Standard) Dish Diameter (in feet) Gain at 2.4 GHz (in dBi) Gain at 5.8 GHz (in dBi) 2 21.1 28.8 4 27.2 34.8 6 31.7 38.3 8 33.2 40.8 10 35.2 42.7 12 36.[...]

  • Seite 20

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 20 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F T ransmitted Power (P T ) The FCC specifies the maximum transm itter power used for antennae of a given gain. FCC Rules Part 15, Subpart 247 allow for a maximum power of 1 watt (30 dBm) into antennae of a gain[...]

  • Seite 21

    TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 21 Path Dist ance ( d) The path distance is the physical distance betw een the transmit and receive antennas. For the TRACER 64x0, these distan ces can range up to 30 miles (48.27 kilometers). System Losses (L) Syste[...]

  • Seite 22

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 22 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Path Loss ( L P ) Path loss is the estimated attenuation between the transmit and receive antennas caused by signal separation and scattering. The path loss is considered basic transmission loss ov er the micr[...]

  • Seite 23

    TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 23 5. RECEIVER SENSITIVITY Receiver sensitivity is a value expre ssed in decibels referenced to one milliwatt (dBm) that corresponds to the minimum amount of signal power needed at the receiver to achieve a given bit[...]

  • Seite 24

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 24 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 6. ANTENNA INFORMATION The overall wire less system is directly af fected by the antenna selection and in stallation, discussed in the following sections. Antenna Alignment W ith line-of-sight microwave commun[...]

  • Seite 25

    TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 25 Antenna Beam Patterns Antennas used with the TRACER 64x0 system have a partic ular beam shape, determined in part by the physical constructio n an d geometry of the antenna. The antenna beam patterns are cha racte[...]

  • Seite 26

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 26 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F where f is in GHz and d is in miles or where f is in GHz and d is in kilometers. The minimum antenna hei ght s for given path lengths are displayed in T able 10 (feet/miles) and T able 11 on page 27 (kilometer[...]

  • Seite 27

    TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 27 7. OTHER CONSIDERATIONS Path A vailability The path availability of a wireless link is a metric that expresses the fractional amoun t of time a link is available over some fixed amount of time, and depends on sev [...]

  • Seite 28

    Section 2 M icrowave Path Engin eering Basics TRACER 6000 Series Integr ated System M anual 28 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F where the parameters are a terrain factor b climate factor f carrier frequency (GHz) d path length (kilometers) F fade margin (dB) T errain Factor (a) The terrain factor is a quantity that compensates the link[...]

  • Seite 29

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 29 ENGINEERING GUIDELINES Provides information to assist network designers wit h incor porating the TRACER 64x0 system into th eir networks. C ONTENT S Equipment Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Power Requir[...]

  • Seite 30

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 30 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. EQUIPMENT DIMENSIONS The TRACER 64x0 integrated radio is 17.2 inch (43.7 cm) W , 1 1.4 inch (28.9 cm) D, and 1.7 inch (4.4 cm) H, weighs 7 pounds (3.18 kg), and can be used in rackmount configurations. 2. POWER REQUIR[...]

  • Seite 31

    TRACER 6000 Series Integrated System Manual Section 3 Engineering Guid e line s 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 31 RSSI Monitoring Interface The RSSI voltage is a function of the signal strength at the receiver an d is used to measure the received signal strength. RSSI varies from ap proximately 0 to 5 VDC. An RSSI calibration sh eet [...]

  • Seite 32

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 32 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F AUX RS232 Interface (RJ-45) The AUX RS232 interface provides a female RJ -45 terminal connection (wired as a DCE interface), used for a 9600 bps p oint -to-p oin t con nec tion between the local an d remote sys tems (ove[...]

  • Seite 33

    TRACER 6000 Series Integrated System Manual Section 3 Engineering Guid e line s 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 33 CRAFT Port (DB-9) The CRAFT connector provides a female DB-9 terminal connection (wired as a DCE interface), used for terminal access to the TRACER system. T able 4 show s the pinout. A null modem cable is necessary for c[...]

  • Seite 34

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 34 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 3. TRACER 64x0 Rear Panel MGMT 10/100BaseT/TX Connection (RJ-48C) The physical Ethernet i nterface is provid ed by a single RJ-48C jack (labeled MGMT ) that delivers 10/100BaseT/TX for LAN connectivity . The MGMT [...]

  • Seite 35

    TRACER 6000 Series Integrated System Manual Section 3 Engineering Guid e line s 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 35 DC Power Connection (Pl ug-In T erminal Block) The TRACER 64x0 can operate from a supply between 21 and 60 VDC, with either polarity referenced to ground, and co nsumes less than 25 W . Power supplies shou ld be able to p[...]

  • Seite 36

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 36 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F loss factors. Applying power to the ra dio without a 50 Ω load attached to the antenna interface can damage the system. V erify the 50 Ω load is attached befor e powering the radio.[...]

  • Seite 37

    TRACER 6000 Series Integrated System Manual Section 3 Engineering Guid e line s 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 37 5. NETWORK MODULE INTERFACES 4xT1 Module The 4xT1 network module has four T1 i nterfaces (through four RJ-4 5 ports) that provide the following functions: • ANSI T1.403 and AT&T ® 54016 and 6241 1 compliant • AMI[...]

  • Seite 38

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 38 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 4xE1 Module with 120 Ω Interface The 4xE1 network module pro vides four E1 interfaces (through four RJ-4 5 connectors) that provide the following functions: • AMI or HDB3 coding • Framed, multi-framed, and unframed[...]

  • Seite 39

    TRACER 6000 Series Integrated System Manual Section 3 Engineering Guid e line s 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 39 Table 13. 4xE1 Module with 75 Ω Interface DB-25 Connector Pinout Pin Name Description 1 E1D RX Receive signal fo r E1 D interface 2 E1D TX Output signal for E1 D interface 3 GND Ground 4 E1C RX Receive signal fo r E1 C [...]

  • Seite 40

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 40 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 4. E1 Breakout Panel 6. AT-A-GLANCE SPECIFICATIONS T able 15 on page 40 contains a list of specifications for the TRACER 64x0 system. Table 15. At-A-Glance Specific ations Hardware Description Specification Tr a n[...]

  • Seite 41

    TRACER 6000 Series Integrated System Manual Section 3 Engineering Guid e line s 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 41 Frequency Pl an Plan A Channel Plan 1 Tx 2.419 GHz, Rx 2.459 GHz (TRACER 6410) Tx 5.744 GHz, Rx 5.824 GHz (TRACER 6420) 2 Tx 2.422 GHz, Rx 2.462 GHz (TRACER 6410) Tx 5.747 GHz, Rx 5.827 GHz (TRACER 6420) 3 Tx 2.425 GHz, R[...]

  • Seite 42

    Section 3 En gineering Guide lines TRACER 6000 Series Integr ated System M anual 42 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Mechanical and En vironmental Operating T emperature -25°C to 65°C Size 1.7 inch (4.4 cm) H 17.2 inch (43.7 cm) W 1 1.4 inch (28.9 cm) D Humidity 95 percent, noncondensing Weight 7 lbs (3 .1 8 kg) Power Input V oltage [...]

  • Seite 43

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 43 NETWORK T URNUP PROCEDURE Provides shipment content s list, grounding instruct ions, mounting options, an d specif ics of supplying power to the unit. C ONTENT S Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 44

    Section 4 Ne twork Turnup Pr ocedure TRACER 6000 Series In tegrated Sy stem Manual 44 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. INTRODUCTION This section discusses TRACER 64x0 system installation. 2. T OOLS REQU IRED The tools required for TRACER 64x0 installation are: • VT100 terminal or PC wit h terminal emulation software • RS-232 (DB[...]

  • Seite 45

    TRACER 6000 Series Integrated System Ma nual Section 4 Network Turnup Proced ure 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 45 Y our Quad T1 module shipment includes the following items: • Quad T1 modul e • Quad T1 modul e quick start guide Y our Quad Ethernet Switch module sh ipment includes the following items: • Quad Ethernet Switch mod[...]

  • Seite 46

    Section 4 Ne twork Turnup Pr ocedure TRACER 6000 Series In tegrated Sy stem Manual 46 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 4. CHANNEL SELECTION The FCC has allocated 83.5 MHz of spectrum in the 2.4 GHz band wher e the TRACER 6410 operates, and 125 MHz of spectrum in the 5.8 GHz band where th e TRACER 6420 operates. Figure 1 and Figu re 2 i[...]

  • Seite 47

    TRACER 6000 Series Integrated System Ma nual Section 4 Network Turnup Proced ure 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 47 5. GROUNDING INSTRUCTIONS The following paragraphs provide grounding instru c tion information from the Un derwriters’ Laboratory UL60950 Standard for Safety of Information T echnology Equipmen t Including Electrical B[...]

  • Seite 48

    Section 4 Ne twork Turnup Pr ocedure TRACER 6000 Series In tegrated Sy stem Manual 48 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 6. SUPPLYING POWER TO THE UNIT The TRACER 64x0 can operate from an LPS or Clas s 2 power source between 21 and 60 VDC and a minimum output current rating of 1.2 A, with either polarity referenced to gr ound. Power supp[...]

  • Seite 49

    TRACER 6000 Series Integrated System Ma nual Section 4 Network Turnup Proced ure 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 49 Figure 3. 19-inch Rackmount Illustration Figure 4. 23-inch Rackmount Illustration TRACER 6420 T R A C E R 6 4 2 0[...]

  • Seite 50

    Section 4 Ne twork Turnup Pr ocedure TRACER 6000 Series In tegrated Sy stem Manual 50 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 8. INST ALLING MODULES Figure 5 shows the slot numbering designation as viewed from the rear of the TRACER 64x0. The functionally identical optio n slots only accept TRACE R 6000 Series modules. Figure 5. TRACER 64 x0 [...]

  • Seite 51

    TRACER 6000 Series Integrated System Ma nual Section 4 Network Turnup Proced ure 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 51 9. CONNECTING THE MODULE INTERFACES Quad T1 Module Interfaces The physical T1 interfaces are provided using four RJ-45 ports located on the module. Stra ight-through T1 interface cables can be used to interface to any st[...]

  • Seite 52

    Section 4 Ne twork Turnup Pr ocedure TRACER 6000 Series In tegrated Sy stem Manual 52 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 6. E1 Connection with Breakout Pane l 1 2[...]

  • Seite 53

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 53 USER INTERFACE GUIDE Provides detailed descrip tions of all menu option s and configuration p arameters available for the TRACER 64x0. This section of the TRACER 60 00 Series Integrated System Manual is designed for use by network administrators and others who will configure and pr ovision the system[...]

  • Seite 54

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 54 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 9. RF Link Error History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Figure 10. RF Link Max/Min Receiv ed Power History . . . . . . . . . . . . . . . . .[...]

  • Seite 55

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 55 1. NAVIGATING THE T ERMINAL MENU The TRACER 64x0 menu system can be accessed with a VT100 compatible terminal that is co nnected to the CRAFT PORT (located on the front of the unit) and set to 9600 bits per second (default),[...]

  • Seite 56

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 56 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Navigating using the Keyboard Keys Y ou can use various keystrokes to move thro ugh the te rminal menu, to manage a terminal menu session, and to configure the system. Moving Through the Menus 2. MENU AND SYSTEM CONTROL P[...]

  • Seite 57

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 57 3. MENU DESCRIPTIONS The remainder of this sec tion describes the TRACER 64x0 menu s and submenus. > S YSTEM S TAT US Figure 2 shows the TRACER 64x0 System Status menu page. The status of major system components for both [...]

  • Seite 58

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 58 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F C. RF St atus A graphical indicator of the RF links is located be neath the Elapsed T ime disp lay . The status of the received radio link is indi cated as RF U P or RF D OWN for each direction. This RF status display cor[...]

  • Seite 59

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 59 I. Rx Power Displays the approximate receiver levels (for both the local and remo te units) using a series of symbols ( # ) and the actual real-time value (in dBm). The more symbols ( # ) displayed, the stronger the signal. [...]

  • Seite 60

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 60 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 3. TRACER 64x0 Main Menu From the keyboard, use the u p and down arrow keys to scroll through the availa ble pages, or enter the number or letter of the selected page (to highlight the menu page) and press <Ente[...]

  • Seite 61

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 61 Figure 4. TRACER 64x0 System Configuration > S YSTEM C ONFI GURATION > S ITE N AME Provides a user-defined alphanumeric description (u p to 25 characters) for the TRACER 64x0 system. > S YSTEM C ONFI GURATION > S[...]

  • Seite 62

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 62 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > S YSTEM C ONFI GURATION > CRAFT P ORT B AUD Specifies the baud rate of the port. Select either 9600 (default), 19200 , 3 8400 , 57600 , or 1 15200 bps. If you are using the CRA FT port for modem access, ensure tha[...]

  • Seite 63

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 63 > RF L INK C ONFIGURATION Figure 5 shows the TRACER 64x0 RF Link Configuration menu pag e, wh ich contains the transmit and receive power settings and band plan configur ation for both the local and remote units. Figure 5[...]

  • Seite 64

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 64 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > RF L INK C ONFIGURATION > RF B AND P LAN Sets the band plan for the TRACER 64x0. Each frequency plan is divided into three band plans (1, 2, or 3). Both local and remote TRACER 64x0 systems must be configured with[...]

  • Seite 65

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 65 > RF L INK C ONFIGURATION > L INK E NCRYPTI ON The TRACER 64x0 provides triple-DES (3DES) encryption of the data passed over the RF Link. When L INK E NCRYPTION is set to E NABLED , the TRACER 64x0 sequentially app lie[...]

  • Seite 66

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 66 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > RF L INK E RROR H ISTORY Figure 9 shows the TRACER 64x0 main RF Link Error History menu page, which displa ys detailed error statistics for the RF link (from both the local and remote TR ACER 64x0 units) in 15-minute[...]

  • Seite 67

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 67 Figure 10. RF Link Max/Min Received Power Histor y The received power level ( MIN and MAX ) represents the minimum and maxi mum values of received signal levels in 24-hour or 15-minute increments, an d is displayed as a nume[...]

  • Seite 68

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 68 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Figure 11. RF Link Min/Max Re ceived Signal Quality History The received power quality level ( MIN and MAX ) represents the minimum and maximum values of received signal quality levels in 24-hour or 15-min ute increments,[...]

  • Seite 69

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 69 > D AT AP ATH P ROVISIONING Figure 12 shows the Datapath Provisioni ng menu page , which displays the active network interfaces for the installed modules (from both the local and remote TRACER 64x0 units). Figure 12. Data[...]

  • Seite 70

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 70 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > 4 X E1 M ODULE C ONFIGURATI ON /S TA T U S /H ISTORY (M AIN S CREEN ) Figure 13 shows the TRACER 64x0 E1 Modul e Config uration main screen, which contains access to the status, configuration, testing, and performanc[...]

  • Seite 71

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 71 > E1 X S TAT U S /C ONFIGURATION /L OOPBACK > E1 X I NTERFACE A LARMS Displays any active alarms on the E1 link (reported from both the local and remo te TRACER 64x0 units). These alarms include AIS, CRC, LCV , LOS, OO[...]

  • Seite 72

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 72 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > E1 X S TAT U S /C ONFIGURATION /L OOPBACK > L INE C ODE Sets the line coding for the E1 link. The TRACER 64x0 supports high-dens ity bipol ar 3 substitution ( HDB3 ) and alternate mark inversion ( AMI ) line codin[...]

  • Seite 73

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 73 > E1 X S TAT U S /C ONFIGURATION /L OOPBACK > L OOP /N ORMAL S TA T E > L INE [R EMOTE ] Activates a loopback at the remote TRACER 64x0 E1 framer towards the connected E1 e quipment at t he remote end of the link (s[...]

  • Seite 74

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 74 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > T1 M ODULE C ONFIGURATI ON /S TAT U S /H ISTORY (M AIN S CREEN ) Figure 20 shows the TRACER 64x0 4xT1 Mo du le Co nfiguration main screen, which contains access to the status , configuration, testi ng, and performanc[...]

  • Seite 75

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 75 >T1 X S TA T U S /C ONFIGURATION /L OOPBACK > T1 X I NTERFACE A LARMS Displays any active alarms on the T1 link (reported from both the local and remo te TRACER 64x0 units). These alarms include Red , Blue/AIS, Y ello [...]

  • Seite 76

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 76 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > T1 X S TA T U S /C ONFI GURATION /L OOPBACK > L OOP /N OR MAL S TA T E > N ORMAL Defines the T1 link as normal data transport mode; there are no active loopbacks. > T1 X S TA T U S /C ONFI GURATION /L OOPBAC[...]

  • Seite 77

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 77 > T1 X P ERFORMANCE H ISTORY Figure 26 shows the T1x Performance Hist ory menu page , which displays detailed error statistics for the T1 link (from both the local and remote TRACER 64x0 units) in 15-minute and 24-ho ur i[...]

  • Seite 78

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 78 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > E THERNET S WITCH M OD ULE C ONFIGURA TION /S TA T U S /H ISTORY (M AIN S CREEN ) Figure 27 shows the Ethernet Switch Module Config ur ation/Status/History main screen, whic h co ntains access to the status, configur[...]

  • Seite 79

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 79 >E THERNET S WITCH C ONFIGURATI ON > P ORT X The Quad Ethernet Switch module pr ovides the capability to individually disable interfaces on the module. Selecting D ISABLE from the P ORT X menu disables the port, stoppi[...]

  • Seite 80

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 80 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F >E THERNET S WITCH S TA T US > R X P ACKETS Displays a counter of all data packets received on the local and remote TRACER 64x0 Ethern et i nterfaces and W AN (RF link). Use this data as an indicator of how many pac[...]

  • Seite 81

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 81 > M ANAGEMENT /SNMP P ORT C ON FIGURATION Figure 31 shows the Managem ent/SNMP Port Configuration men u page, which contain s the configuration parameters for the 10/100BaseT/TX MGMT Ethernet interface and SNMP configurat[...]

  • Seite 82

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 82 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > M ANAGEMENT /SNMP P ORT C ON FIGURATION > SNMP G ET C OMMUNITY Defines the community name for Get access (to poll the TRACER 64x0 for status information). This value must match the Get name defined on the netw ork[...]

  • Seite 83

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 83 > P ING U TILITY > N UMBER OF P ACKET S Specifies the number of ping packets to send to the IP address specified in the P ING A DDRESS field. The default value is 4, and the maximum value is 99. > P ING U TILITY >[...]

  • Seite 84

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 84 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > F IRMWARE U PGRADE U TILITY Figure 33 shows the Firmware Upgrade Utility menu pa ge, which contains the pa rameters for performing a firmware upgrade for the local and remote systems. Figure 33. Firmware Upgrade Util[...]

  • Seite 85

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 85 > F IRMWARE U PGRADE U TILITY > U PGRADE D ESTINATION Specify the unit to upgrade. The following options are available: > F IRMWARE U PGRADE U TILITY > C OMMAND Use this command to start ( S T ART ) or stop ( A B[...]

  • Seite 86

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 86 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F > RF L INK M ANAGEMENT B RIDGE C ONFIGURATION Figure 34 shows the RF Link Bridge Configuration menu page, which co ntains the parameters for enabling and configuring the TRACER 64x 0 management bridge fo r passing info[...]

  • Seite 87

    TRACER 6000 Series Integrated System Manual Section 5 User I nterface Gu ide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 87 >RF L INK M ANAGEMENT B RIDGE C ONFIGURATION > I NACTIVITY T IMEOUT Defines the amount of time that an Ethernet address is maintained in the bridge table. A shorter time produces a more dynamic bridge table, allowing a[...]

  • Seite 88

    Section 5 Use r Interface G uide TRACER 6000 Ser ies Integrat ed System Man ual 88 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F displays only during an active alarm condition. Once the condition has cleared, the speed alarm is cleared from the display . A F AN H AS F AILED display indicates that the fan has reported a low speed consistently and is[...]

  • Seite 89

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 89 DET AIL LEVEL PROCEDURES Provides detailed instruction s on performing common s ystem t asks such as connecting to the system and upgrading firmwa re. C ONTENT S DLP-1 Connecting a VT100 Terminal or PC to the CRAFT Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 DLP-2 Logging into the [...]

  • Seite 90

    Section 6 De tail Level Procedu res TRACER 6000 Series Integr ated System M anual 90 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F[...]

  • Seite 91

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 91 DLP-1 Connecting a VT100 T erm inal or PC to the CRAFT Port Introduction TRACER 64x0 management and provisioning are facilitated by a series of intui tive menus that are accessible on a computer screen. Connecting either a VT100 terminal or a PC with terminal emulation software to the CRAFT interface[...]

  • Seite 92

    Section 6 DLP-1 TRACER 6000 Series In te gr at ed Syste m Manu al 92 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. Connecting a VT10 0 te rm inal to the TR ACER 64 x0 : 2. Connecting a PC emula ting a VT 10 0 te rm in al to th e TR ACER 64 x0 : Most PCs or laptop s can run communications sof twa re that emulates a VT100 term in al. Exam ple s in[...]

  • Seite 93

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 93 DLP-2 Logging into t he TRACER 64x0 Introduction Once you are connected to the TRACER 64x0, you mu st log into the system to gain access to the management and prov isioning functions. This DLP a ssumes you are connected to the TRACER 64x0 and provides specific steps for logging into the system. Prere[...]

  • Seite 94

    Section 6 DLP-2 TRACER 6000 Series In te gr at ed Syste m Manu al 94 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. After connecting to the system , press any key to display the L OGIN screen shown here. The flashing cursor at the L OGIN field indicates that a password must be entere d. 2. Enter the password for the TRACER 64x0 at the L OG IN fie[...]

  • Seite 95

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 95 DLP-3 Setting IP Paramete rs for the TRACER 64x0 Introduction If the TRACER 64x0 is connected to an IP networ k for T elnet, TFTP , or SNMP management, several IP parameters must be set for the unit to communicate with the network. These parameters are described in this DLP along with the pr ocedures[...]

  • Seite 96

    Section 6 DLP-3 TRACER 6000 Series In te gr at ed Syste m Manu al 96 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. Log into the system with maximum rights (details are in DLP-2, Logging into the TRACER 64x0 , on page 93). 2. Press m to activate the Main me nu page . From the Main menu p age, press 7 to select M ANAGEMENT /U TILITIES . 3. From th[...]

  • Seite 97

    TRACER 6000 Series Integrated System Manual Section 6 DLP-3 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 97 4. From the M ANAGEMENT /SNMP C ONFIGU RATION menu pa ge, select the IP A DDRESS field an d press < Enter >. T ype the IP address provided by your network manager and press < Enter > to accept the change. Repeat the process for t[...]

  • Seite 98

    Section 6 DLP-3 TRACER 6000 Series In te gr at ed Syste m Manu al 98 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F[...]

  • Seite 99

    612806420L1-1F 99 DLP-4 V erifying Communica tions Over an IP LAN Introduction When the 10/ 100BaseT/TX MGMT port is connected to a local area network (LAN), test steps must be performed on the TRACER 64x0 to en sure that the unit is communicating properly over the network. This procedure outlines those steps. Prerequisite Procedures Before beginni[...]

  • Seite 100

    Section 6 DLP-4 TRACER 6000 Series In te gr at ed Syste m Manu al 100 612806420L1-1F 1. V erify the TRACER 64x0 IP address. If you do not already have the IP Address for the TRACER 64x0, obtain it from the netwo rk administrator or manually check fo r the address on the M ANAGEMENT /SNMP C ONFIGURATION page. (Access the M ANAGEMENT /SNMP C ONFIGURA[...]

  • Seite 101

    TRACER 6000 Series Integrated System Manual Section 6 DLP-4 612806420L1-1F 101 3. T elnet to the TR ACER 64x0. From the same computer u sed in the previous step, T elnet to the TRACER 64x0 and verify t hat the T elnet session is properly opened. Once the T elnet session is established, press <Ctrl+z> to logout of the session and return to the[...]

  • Seite 102

    Section 6 DLP-4 TRACER 6000 Series In te gr at ed Syste m Manu al 102 612806420L1-1F[...]

  • Seite 103

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 103 DLP-5 Up d ating the Firmware Using TFTP Introduction The TRACER 64x0 su pports firmware updates using TFTP or XMODEM. Use the 10/100BaseT/TX MGMT Ethernet port and TFTP from a network server or XMODEM (if your T elnet client supports file transfers), or use XMODEM and the CRAF T interface. This DLP[...]

  • Seite 104

    Section 6 DLP-5 TRACER 6000 Series In te gr at ed Syste m Manu al 104 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. Connect to the TRACER 64x0 using the 10/10 0BaseT/TX MGMT interface. If you are not already connected to the unit’ s 10/100BaseT/TX MGMT port using T elnet client software, use th e procedure in DLP-3, Setting IP Parameters for t[...]

  • Seite 105

    TRACER 6000 Series Integrated System Manual Section 6 DLP-5 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 105 U PGRADE I MAGE IS I NVALID Indicates that the system image was not verified as a valid image for the specified update . Before t he firmware upgr ad e begins, the TRACER 64 x0 verifies th at the image is valid. If it is not valid for the s[...]

  • Seite 106

    Section 6 DLP-5 TRACER 6000 Series In te gr at ed Syste m Manu al 106 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 10. When the update has succe ssfully completed, I DLE displays in the C URRENT U PD A T E S TA T U S field and U PGRADE F INISHED S UCCESSFULLY displays in the P REVIOUS U PDATE S TA TU S field. The TRACER 64x0 will restart immediat [...]

  • Seite 107

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 107 DLP-6 Up d ating the Firmware Using XM ODEM Introduction The TRACER 64x0 supports firmwa re updates of the local and remo te systems using TFTP or XMODEM. Use the 10/100BaseT/TX MGMT port and TFTP from a network server or XMODEM (if your T elnet client supports file transfers), or use XMODEM and the[...]

  • Seite 108

    Section 6 DLP-6 TRACER 6000 Series In te gr at ed Syste m Manu al 108 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. Connect to the TRACER 64 x0 usin g th e front panel DB-9 CRAFT interface. If you are not already connected to the unit’ s CRAF T interface (either with a VT100 comp atible terminal or with a PC runn ing VT100 emulatio n softwar e[...]

  • Seite 109

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 109 MIBS Provides a listing of SNMP Management Info rmation Ba ses (MIBs) supported by the TRACER 64x0. Th is section also lists tr aps supported for each MIB. C ONTENT S MIBs Supported by the TRACER 64x0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 MIB C[...]

  • Seite 110

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 110 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. MIBS SUPPORTED BY THE TRACER 64x0 T able 1 lists the MIBs supported by the TRACER 64x0. 2. MIB COMPILATION ORDER MIBs are compiled in the order shown in T able 2. Table 1. MIBs Supported by the TRACER 64x0 rfc2495.m ib S tandard –[...]

  • Seite 111

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 111 3. T RAP S SUPPORT ED BY THE TRACER 64x0 The TRACER 64x0 supports the traps descr ibed in Table 3. Table 3. Traps Supported by the TRACER 64x 0 MIB T rap This trap i ndicates th at.... TRACER6000.mib adTRACERColdS ta rt the unit has powered[...]

  • Seite 112

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 112 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F TRACER6000.mib adTRACERBPV off a change in the BiPolar V iolation (BPV) state has occurred and the BPV al arm is inactive. adTRACERRAoff a change in the Frame RA (Rem ote Alarm) state has occurred and the RA alarm is ina ctive. adTRACE[...]

  • Seite 113

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 113 TRACER6000.mib adTRACERtotalThr sESon the threshold for T otal ES has b een exceeded. adTRACERtotalThr sESof f the threshold for T otal ES has n ot been exceeded. adTRACERtotalThsSESon the threshold for T otal SES has been exceeded. adTRACE[...]

  • Seite 114

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 114 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 4. MIB V ARIABLES SUPPORTE D BY THE TRACER 64X0 Table 4. MIB Variables for ad.mi2 ad adProducts adProductInfo adProdName DisplayS tring RO adProdPartNumber DisplayS tring RO adProdCLEIcode DisplayS tring RO adProdSerialNumber Disp layS[...]

  • Seite 115

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 115 adDS1CurrentAr m Integer RW adDS1 T otalArm Integer RW adDS1FarCurre ntArm Integer RW adDS1FarT otalArm Integer RW adDS1Curren tThreshold adDS1CurrentT hrsES Integer RW adDS1CurrentT hrsSES Integer RW adDS1CurrentT hrsSEFS Integer RW adDS1C[...]

  • Seite 116

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 116 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F adTRACER6000cfg adTRACERBaudRate Integer RW adTRACERBandPlan Integer RW adTRACERactiveChannels Integer RW adTRACERchannelSelect adTRACERdsx1ChannelSelectT able adTRACERdsx1Ch annelSelectEntr y AdTRACERdsx1ChannelSelectEntry adTRACERdsx[...]

  • Seite 117

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 117 adTRACERswitchW anS tatusT able adTRACERswitchW anS tatusEntry AdTRACERswitchW anS tatusEntry adTRACERswitchW anS tatusIdx Integer RO adTRACERswitchW anTxPackets Integer RO adTRACERswitchW anTxPacketsDrop Integer RO adTRACERswitchWa nRxPack[...]

  • Seite 118

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 118 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F adTRACERintervalCSU1Des Integer RO adTRACERintervalCSU1Dses Integer RO adTRACERIntervalV alidData T ruthV alue RO adTRACERcsu 2IntervalT able adTRACERcsu2I ntervalEntry AdTRACERcsu2IntervalEntry adTRACERcsu2IntervalIndex Integer RO adT[...]

  • Seite 119

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 119 adTRACERintervalRFCs* Integer RO adTRACERintervalMaxRxLs Integer RO adTRACERintervalMinRxLs Integer RO adTRACERintervalMaxRxQs Integer RO adTRACERintervalMinRxQs Integer RO adTRACERintervalV alidData T ruthV alue RO adTRACERtot alT able adT[...]

  • Seite 120

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 120 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F AdTRACERremoteSwitch ChannelSelectEn try adTRACERremoteSwitchChanne lSelectEntry adTRACERremoteSwitchChanne lSelectIdx Integer RO adTRACERremoteSwitchChanne lSelection Integer RW adTRACERremoteTxPower DisplayS tring RW adTRACERremoteAl[...]

  • Seite 121

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 121 adTRACER6000remo teFanS tatus adTRACERremoteFan1* DisplayS tring RO adTRACERremoteFan 1AlarmT ripped * DisplayS tring RO adTRACERremoteFan2* DisplayS tring RO adTRACERFan2AlarmT ripped* DisplayS tring RO adTRACERrem oteT emp erature* Displa[...]

  • Seite 122

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 122 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F adTRACERremoteintervalCSU2Cses Integer RO adTRACERremoteintervalCSU2Des Integer RO adTRACERremoteintervalCSU2Dses Integer RO adTRACERremoteInte rvalV alidData T ruthV alue RO adTRACERremoteCurre nt adTRACERremoteCurrentRF s Integer RO [...]

  • Seite 123

    TRACER 6000 Series Integrated System Manual Se ction 7 MIBs 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 123 adTRACERremoteT otalMinRxLs Integer RO adTRACERremoteT otalMaxRxQs Integer RO adTRACERremoteT otalMinRxQs Integer RO adTRACERremoteT otalV alidData T ruthV alue RO Table 6. MIB Variables for TRACER6000.mib (Continued)[...]

  • Seite 124

    Section 7 MIBs TRACER 6000 Series In te gr at ed Syste m Manu al 124 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F[...]

  • Seite 125

    612806420L1-1F Copyright © 2005 ADTRAN, Inc. 125 T ROUBLESHOOTING GUIDE Provides helpful info rmation for troubleshooting co mmon configuration pr oblems for the TRACER 64x0. C ONTENT S Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 LED Indica[...]

  • Seite 126

    Section 8 Troubleshoo tin g Gu ide TRACER 6000 Ser ies In te gr at ed System Man u al 126 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1. OVERVIEW This troubleshooting guide recommends correctiv e actions for various conditio ns of the TRACER 64x0 system. The status LEDs (located on the front pane l of the un it) provide information to help determ[...]

  • Seite 127

    TRACER 6000 Series Integrated System Manual Section 8 Troublesho oting Guide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 127 RF LOW LED If the RF LOW LED is ON (solid red), the received signal is approaching 0 V of RSSI. This condition is typically indicative of a path or installation problem. Recommended Actions: 1. V erify the far-end transmitt[...]

  • Seite 128

    Section 8 Troubleshoo tin g Gu ide TRACER 6000 Ser ies In te gr at ed System Man u al 128 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F BPV Bipolar violations (BP Vs) indicate an improper configuration or fau lty wiring. Recommended Actions: 1. V e rify the TRACER 64x0 unit and the att ache d equipment are co nfigured for the same line coding ( B8Z[...]

  • Seite 129

    TRACER 6000 Series Integrated System Manual Section 8 Troublesho oting Guide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 129 CRC CRC errors indicate that the receiver is unable to synchronize to the CRC-4 frame pattern of the received E1 signal. Recommended Actions: 1. V erify the TRACER 64x0 unit and the att ached equipment are configured fo r t[...]

  • Seite 130

    Section 8 Troubleshoo tin g Gu ide TRACER 6000 Ser ies In te gr at ed System Man u al 130 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F Nonviable path conditions could be caused by physical obstructions such as buildings, mountainous terrain, trees, etc., as well as other physical limitati ons such as excessive path distances and in-band RF interfe[...]

  • Seite 131

    TRACER 6000 Series Integrated System Manual Section 8 Troublesho oting Guide 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 131 the coaxia l cab le sh oul d be a s ign ificant fraction of 100 mW . A power meter/analyzer reading that is not on the order of at least tens-of-milliwatts could be an in dication of unsuitable RF cable o r faulty or unreas[...]

  • Seite 132

    Section 8 Troubleshoo tin g Gu ide TRACER 6000 Ser ies In te gr at ed System Man u al 132 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F 1 1. Command a link loopback on the remote TRAC ER 64x0 unit and run a test pattern from the connected T1 equipment. This will veri fy the data path across the RF link. Inst alling/Configuring T1 Hardware 1. If pos[...]