AEG QR2520W Bedienungsanleitung

QR2520W QR2520X User manual Refrigerator[...]

Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all process es perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass i[...]

unnecessary mistakes and accidents, it is important to ensure that all people using the ap - pliance are thoroughly familiar with its operation and safety features. Save these instruc - tions and make sure that they remain with the appliance if it is moved or sold, so that ev - eryone using it through its life will be properly informed on appliance[...]

1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged b y the back of the ap - pliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the[...]

Service • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. • This product must be serviced by an authorized S ervice Centre, and only genuine spare parts must be used. Environment Protection This appliance does not contain gasses which could damage the ozone [...]

7 Minute Minder function 8 Humidity function Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the ON/OFF button if the display is off. 3. If "dEMo" appears on the display, the applia nce is in demonstration mode. Refer to "What to do if..." paragraph. 4. The temperat[...]

1. Press OK button to switch off the sound and terminate the function. It is possible to deactivate the function at any time during the countdown: 1. Press the Mode button until the Minute Mi nder indicator flashes. 2. Press the OK button to confirm. 3. The Minute Minder indicator goes off. It is possible to change the time during the countdown by [...]

1. Press the Mode button until the Extra Humidity indi cator flashes. 2. Press the OK button to confirm. 3. The Extra Humidity indicator goes off. Holiday function This function allows you to keep the refrigerator closed and empty d uring a long holiday period without the formation of a bad smell . The fridge compartment must be empty with holiday [...]

Check that the drain hose at the rear of the cabi - net discharges into the drip tray. DAILY USE Movable shelves The walls of the refrigerator are equipped with a series of shelves support so that the shelves can be positioned as desired. Some shelves must be lifted up by the rear edge to enable them to be removed. Do not move the glass shelf above[...]

Bottle rack Place the bottles (with the opening facing front) in the pre-positioned shelf. If the shelf is positioned horizontally, place only closed bottles. This bottle holder shelf can be tilted in order to store previously opened bottles. To obtain this re - sult, pull the shelf up so it can rotate upwards and be placed on the next higher level[...]

Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at dif - ferent heights. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the ar - rows until it comes free, then reposition as re - quired. Do not move the big lower door shelf to ensure correct[...]

Fruit and vegetables: these should be thoroughly cleaned and placed in the special draw - er(s) provided. Butter and cheese: these should be placed in special airtight containers or wrapped in alu - minium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the b ottle rack on the[...]

Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use [...]

Defrosting the refrigerator Frost is automatically eliminated from the evapo - rator of the refrigerator co mpartment every time the motor compressor stops, during normal use. The defrost water drains out through a drain hole into a special container at the back of the appli - ance, over the motor compressor, where it evapo - rates. It is important[...]

Problem Possible cause Solution upper or lowe r square is shown in the tempera- ture display. An error has occurred in meas - uring the temperature Call your service representa tive (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible) “dEMo” appears on the display. The appliance is in de[...]

Problem Possible cause Solution The mains plug is no t connected to the mains socket correctly. Connect the mains plug to the mains sock et correc tly. The appliance has no power. There is no voltage in the mains socket. Connect a another elect rical ap - pliance to the mains socket. Check fuse. Contact a qualified electrician. The lamp does not wo[...]

Positioning Install this appliance at a location where the ambient temperature correspo nds to the cli - mate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location To ensure best performance, if the appliance is positioned be[...]

1. Open the door. 2. Remove the transport support from the door sides. 3. Remove the transport support from the lower hinge (some models). Some models are fitted with a silencing pad under the cabinet. Do not remove this pad. Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves durin[...]

1. Screw the top handle bracket to the handle rod. 2. Fit the bottom handle bracket on the lower left-hand side of the door. 3. Fit the top handle bracket on the top left-hand side of the door. 4. Screw the handle rod to the bottom handle bracket. Do not use excessive force and overtighten the screws (max. 2 Nm) as you may damage the door handles. [...]

3. Insert the filter in the slot found in the back of the air lever flap. 4. Close the air lever flap. The filter should be handled carefully so fragments do not loosen from the surface. Make sure that the air lever flap is closed to obtain proper function. Door reversibility To change the opening direction of the door, do these steps: 1. Remove th[...]

6. Unscrew the lower hinge (C1). Move the pin to the opposite side (C2). Unscrew and move the pedal to the opposite side (C3). Screw on the lower hinge on the oppo - site side. 7. Tighten the pin with the adjustment spanner supplied. 8. Install the handle on the opposite side. 9. Raise the appliance and install the ven - tilation grille. 10. Put th[...]

CLICK! CLICK! BRRR! BRRR! BLUBB! BLUBB! HISSS! HISSS! 22 Noises[...]

SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will hel[...]

www.aeg.com/shop 298376912-C-192011[...]