AKG Acoustics CK 63-ULS Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 52 Seiten
- 0.1 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
- 
									
                                        MicrophoneAKG Acoustics C 4000B 2820Z00015 Seiten 0.69 mb
- 
									
                                        MicrophoneAKG Acoustics D 880MS2 Seiten 0.66 mb
- 
									
                                        MicrophoneAKG Acoustics C 4000B2 Seiten 0.81 mb
- 
									
                                        MicrophoneAKG Acoustics WMS 40 PRO16 Seiten 1.8 mb
- 
									
                                        MicrophoneAKG Acoustics C 300038 Seiten 2.77 mb
- 
									
                                        MicrophoneAKG Acoustics WMS 40100 Seiten 3.72 mb
- 
									
                                        MicrophoneAKG Acoustics CK 62-ULS52 Seiten 0.1 mb
- 
									
                                        MicrophoneAKG Acoustics C9002 Seiten 0.49 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung AKG Acoustics CK 63-ULS an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von AKG Acoustics CK 63-ULS, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung AKG Acoustics CK 63-ULS die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung AKG Acoustics CK 63-ULS. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung AKG Acoustics CK 63-ULS sollte vor allem folgendes enthalten: 
							 - Informationen über technische Daten des Geräts AKG Acoustics CK 63-ULS 
							 - Den Namen des Produzenten und das Produktionsjahr des Geräts AKG Acoustics CK 63-ULS 
							 - Grundsätze der Bedienung, Regulierung und Wartung des Geräts AKG Acoustics CK 63-ULS 
							 - Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen 
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von AKG Acoustics CK 63-ULS zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von AKG Acoustics CK 63-ULS und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service AKG Acoustics finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von AKG Acoustics CK 63-ULS zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts AKG Acoustics CK 63-ULS, über die Nutzung bestimmter Accessoires  und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von AKG Acoustics CK 63-ULS widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
- 
                            Seite 1C 480 B comb-ULS/61 C 480 B CK 61-ULS CK 62-ULS CK 63-ULS Bedienungshinweise User Instructions Mode d’emploi Istruzioni d’uso Modo de empleo[...] 
- 
                            Seite 2Einleitung Die AKG Entwicklungsingenieure haben in einer konzentrierten Entwicklungsphase mit den letzten technischen Erkenntnissen ein Mikrofon entwickelt, das in seinen Übertragungseigenschaften dem hohen Standard der Digital-T echnik gerecht wird. Die Elektronik des neuen Mikrofons beschreitet neue W ege der V orverstärker technik und ist der [...] 
- 
                            Seite 3Folgendes Zubehör wird mitgeliefer t: Für C 480 B comb-ULS/61: • SA 40 Elastischer Stativanschluß • W 32 Schaumstoff-Windschutz • Original-Frequenzkur ve Für C 480 B: • SA 40 Elastischer Stativanschluß Empfohlenes Zubehör: H 30 Elastische Aufhängung H 38 Elastische Halterung SA 38/H Elastische Halterung/Stativanschluß- Kombination K[...] 
- 
                            Seite 4Die mögliche Anhebung der V or verstärkung um +6 dB wird vor allem bei der V er wendung der Richt- rohrkapsel CK 69-ULS von V orteil sein, da dabei – durch die größeren Mikrofonabstände bedingt – der zu er wartende Nutzpegel am Mikrofon geringer sein wird. Die an dem Mikrofon einschaltbare Baßab- schwächung hilft zusätzlich V erzerrunge[...] 
- 
                            Seite 5Stromversorgung: Der C 480 B V orverstärker kann aus Phantomspeise- quellen nach DIN 45596 gespeist werden. Diese Norm schreibt eine positive Spannung von 48 V an den NF-Leitungen gegen die Kabelabschirmung vor . Folgende Anschlußschemata werden empfohlen: 5 a) Schaltung mit Eingangsübertrager mit Mitten- anzapfung (erdfrei).[...] 
- 
                            Seite 6b) Schaltung mit Eingangsübertrager ohne Mitten- anzapfung (erdfrei). 6[...] 
- 
                            Seite 7Normwerte für Rv (oder 2 x Rv): U = Rv 2 x Rv 48 V ± 4 V 3300 Ohm 6800 Ohm Die Widerstände 2 x Rv dür fen aus Gründen der Symmetrie max. 0,5 % T oleranz haben. Sind die V erstärkereingänge geerdet oder keine Ein- gangsübertrager vorhanden, müssen entweder Kon- densatoren oder zusätzliche T ransformatoren in die NF-Leitungen eingefügt wer[...] 
- 
                            Seite 8T echnische Daten C 480 B comb-ULS/61: W andlerprinzip: Druckgradientenempfänger Übertragungsbereich: 20 bis 20.000 Hz ± 1 dB von Sollkur ve Leerlaufübertragungsfaktor bei 1000 Hz – Stellung 0 dB: 20 mV/Pa Ⳏ -34 dBV*) – Stellung +6 dB: 40 mV/Pa Ⳏ -28 dBV*) – Stellung -10 dB: 6,3 mV/Pa Ⳏ -44 dBV*) Polardiagramm: Niere Ersatzgeräusch[...] 
- 
                            Seite 9Geräuschpegelabstand bez. auf 1 Pa (A-bewertet) – Stellung 0 dB: 83 dB – Stellung +6 dB: 81 dB – Stellung -10 dB: 77 dB Grenzschalldruckpegel für k = 0,5 % – Stellung 0 dB: 200 Pa Ⳏ 140 dB SPL**) – Stellung +6 dB: 100 Pa Ⳏ 134 dB SPL**) – Stellung -10 dB: 316 Pa Ⳏ 144 dB SPL**) Dynamikbereich (A-bewertet) – Stellung 0 dB: 129 [...] 
- 
                            Seite 1010 T echnische Daten C 480 B + CK 62 - ULS W andlerprinzip: Druckempfänger Polardiagramm: Kugel Die restlichen Daten sind ident zu C 480 B + CK 61 - ULS C 480 B + CK 63 - ULS W andlerprinzip: Druckgradientenempfänger Polardiagramm: Hyperniere Die restlichen Daten sind ident zu C 480 B + CK 61 - ULS[...] 
- 
                            Seite 1111 T echnische Daten C 480 B V or verstärker: Übertragungsbereich: 10 bis 30.000 Hz ± 0,3 dB Steilheit des Baßabschwächungsfilters: 12 dB/Oktave, in allen Stellungen V orabschwächung: +6 dB, 0 dB und -10 dB, schaltbar Elektrische Impedanz: ≤ 150 Ohm Empfohlene Lastimpedanz: 2000 Ohm // 1 nF (IEC 268-15 A) Magnetfeld – Störfaktor bei 50 H[...] 
- 
                            Seite 12Introduction: The AKG staff of engineers have concentrated their efforts and know-how to produce a microphone which is equal to and, in fact, deser ving of the pris- tine transmission qualities of Digital T echnology . The electronics of the new microphones are a completely new departure, and the key to the digital-level performance of the micropho[...] 
- 
                            Seite 13Optional Accessories: H 30 Elastic Suspension H 38 Elastic Shock Mount SA 38/H Elastic Shock Mount/Stand Adapter Combination KA 38 Camera Adapter to operate the Microphone via the H 38 on Film- or Video-Came- ras. B 18 + A 48 V Batter y Supply Unit + 48V Adapter N 62 E Power Supply Unit for two micro- phones N 66 E Power Supply Unit for six micro- [...] 
- 
                            Seite 14particular advantage when using the C 480 B with the CK 69-ULS shotgun capsule which normally is used relatively far from the sound source so the wanted sound level at the microphone will be com- paratively low . The incorporated bass-cut filter reduces the risk of distortion at low frequencies. This feature is espe- cially useful in combating wind[...] 
- 
                            Seite 1515 Powering The C 480 B preamplifier may be powered in phan- tom technique according to DIN 45596. These stan- dards specify a positive voltage on the audio lines versus the screen of the audio cable of 48 volts. The two possible wiring methods are shown below: a) circuitr y incorporates input transformer with centre tap (ungrounded)[...] 
- 
                            Seite 1616 b) circuitr y incorporates input transformer without centre tap (ungrounded)[...] 
- 
                            Seite 1717 The following values for Rv (or 2 x Rv) are stan- dardised: U = Rv 2 x Rv 48 V ± 4 V 3300 Ohm 6800 Ohm The resistors 2 x Rv have to be of at least 0.5 % tolerance type to satisfy the symmetr y requirements. In case where single ended (grounded) amplifier inputs, or where no input transformers are available, either capacitors or optional transfo[...] 
- 
                            Seite 18Specifications C 480 B comb-ULS/61: T ype: Pressure gradient microphone Frequency range: 20 to 20.000 Hz ± 1 dB from specified cur ve Sensitivity at 1000 Hz 0 dB position: 20 mV/Pa Ⳏ -34 dBV*) +6 dB position: 40 mV/Pa Ⳏ -28 dBV*) -10 dB position: 6.3 mV/Pa Ⳏ -44 dBV*) Polar pattern: Cardioid Equivalent noise level to DIN 45 405 (CCIR 468-2) [...] 
- 
                            Seite 1919 Signal/noise ratio re 1 Pa (A weighted) 0 dB position: 83 dB +6 dB position: 81 dB -10 dB position: 77 dB Max. SPL for 0.5 % THD 0 dB position: 200 Pa Ⳏ 140 dB SPL**) +6 dB position: 100 Pa Ⳏ 134 dB SPL**) -10 dB position: 316 Pa Ⳏ 144 dB SPL**) Dynamic range (A weighted) 0 dB position: 129 dB +6 dB position: 121 dB -10 dB position: 127 dB[...] 
- 
                            Seite 2020 Specifications C 480 B + CK 62 - ULS T ransducer type: pressure receiver Polar pattern: omni-directional The remaining specifications are identical to those of C 480 B + CK 61 - ULS C 480 B + CK 63 - ULS T ransducer type: pressure gradient receiver Polar pattern: hypercardioid The remaining specifications are identical to those of C 480 B + CK 6[...] 
- 
                            Seite 2121 Specifications C 480 B Preamplifier Frequency range: 10 to 30.000 Hz ± 0.3 dB Bass cut filter slope: 12 dB/octave, for all positions Gain: +6 dB, 0 dB, -10 dB, selectable Impedance: ≤ 150 Ω Recommended load impedance: 2000 Ω // 1 nF (IEC 268-15 A) Hum sensitivity at 50 Hz: Lower than self-noise Supply voltage: P 48 (phantom power to DIN 4[...] 
- 
                            Seite 22Introduction: En concentrant leurs efforts sur l’exploitation des techniques de pointe, les ingénieurs du bureau d’étu- des d’AKG ont pu sortir un microphone dont les qua- lités de transmission sont à la hauteur de la techni- que numérique. La conception électronique de ce nouveau micro- phone qui sort des sentiers battus en ce qui conc[...] 
- 
                            Seite 23Le microphone C 480 B comb “ULS“ est fourni avec les accessoires suivants: Pour C 480 B comb-ULS/61: • Raccord de pied élastique SA 40 • Boule anti-vent en mousse W32 • Courbe de résponse en fréquence originale Pour C 480 B: • Raccord de pied élastique SA 40 Accessoires recommandés: Fixation élastique H 30 Fixaton élastique H 38 [...] 
- 
                            Seite 246 dB est par ticulièrement appréciée lorsqu’on utilise la capsule canon CK 69-ULS avec laquelle le niveau utile du microphone se trouve réduit du fait de sa distance à la source sonore relativement importante. Le filtre d’atténuation des graves incorporé permet en outre de réduire à un minimum, aux très basses fréquences, les distors[...] 
- 
                            Seite 2525 Alimentation Le préamplificateur C 480 B peut être alimenté par des sources fantômes suivant DIN 45596. Cette norme prescrit une tension positive de 48 V sur les lignes b.f. contre l’écran du câble. Les branchements représentés dans les schémas ci-dessous sont recommandés: a) Montage avec transformateur d’entrée à prise médiane [...] 
- 
                            Seite 2626 b) Montage avec transformateur d’entrée sans prise médiane (sans mise à la terre).[...] 
- 
                            Seite 2727 V aleurs normalisées pour Rv (ou 2 x Rv) U = Rv 2 x Rv 48 V ± 4 V 3300 Ohm 6800 Ohm Pour des raisons de symétrie la resistance 2 x Rv doit montrer une tolérance de 0,5 % au maximum. Si les entrées de l’amplificateur sont mises à la terre ou encore si’il n’y a pas de transformateur d’entrée, il faut ajouter soit des condensateurs s[...] 
- 
                            Seite 28Caractéristiques techniques C 480 B comb-ULS/61: Principe du transducteur: récepteur combiné à gradient de pression et interférences Gamme de fréquences: 20–20.000 Hz ± 1 dB de la courbe nominale Sensibilité (1000 Hz): – position 0 dB: 20 mV/Pa Ⳏ -34 dBV*) – position +6 dB: 40 mV/Pa Ⳏ -28 dBV*) – position -10 dB: 6,3 mV/Pa Ⳏ -[...] 
- 
                            Seite 29Rapport signal/bruit rapp. à 1 Pa (pondéré A): – position 0 dB: 83 dB – position +6 dB: 81 dB – position- 10 dB: 77 dB Niveau maximal de pression sonore pour 0,5 % de DHT : – position 0 dB: 200 Pa Ⳏ 140 dB SPL**) – position +6 dB: 100 Pa Ⳏ 134 dB SPL**) – position -10 dB: 316 Pa Ⳏ 144 dB SPL**) Dynamique (pondérée A): – pos[...] 
- 
                            Seite 3030 Caractéristiques techniques C 480 B + CK 62 - ULS Principe de fonctionnement: microphone à pression Diagramme polaire: omnidirectionnel T outes autres données sont identiques aux celles du C 480 B + CK 61 - ULS C 480 B + CK 63 - ULS Principe de fonctionnement: microphone à gradient de pression Diagramme polaire: hypercardioide T outes autres[...] 
- 
                            Seite 3131 Caractéristiques techniques Préamplificateur C 480 B Réponse en fréquence: 10 à 30.000 Hz ± 0,3 dB Pente du filtre d’atténuation des graves: 12 dB/octave, pour toutes les positions Pré-atténuation: commutable sur +6 dB, 0 dB et -10 dB Impédance électrique: ≤ 150 Ω Impédance de charge recommandée: 2000 Ω // 1 nF (IEC 268-15 A[...] 
- 
                            Seite 32Introduzione In una fase di sviluppo intenso, gli ingegneri die svi- luppo della AKG hanno realizzato, basandosi sulle più recenti conoscenze tecniche, un microfono che, grazie alle sue caratteristiche di trasmissione, sod- disfa le elevate esigenze della tecnica digitale. L ’elettronica di questo nuovo microfono percorre nuove strade nella tecn[...] 
- 
                            Seite 33Il microfono viene fornito con i seguenti accessori in dotazione: Per C 480 B comb-ULS/61: • SA 40 collegamento elastico per supporto • W 32 antisoffio in schiuma • cur va originale delle frequenze Per C 480 B: • SA 40 collegamento elastico per supporto Accessori raccomandati: H 30 sospensione elastica H 38 sospensione elastica SA 38/H coll[...] 
- 
                            Seite 34L ’attenuazione inseribile del segnale d’uscita di 10 dB sarà di par ticolare vantaggio in relazione a pressioni acustiche alte (impiego nelle vicinanze di fonti acustiche ricche di energia) e stadi d’ingresso di amplificatori o mixers con livello d’ingresso massimo limitato perché altrimenti si verifica un sovraccarico già in questi sta[...] 
- 
                            Seite 3535 Alimentazione: Il preamplificatore C 480 B può venir alimentato con fonti d’alimentazione phantom secondo DIN 45596. Questa norma prescrive una tensione positiva di 48 V applicata alle linee a bassa fre- quenza contro la schermatura del cavo. Si raccomandano i sequenti schemi di collegamento: a) collegamento con trasformatore d’ingresso con[...] 
- 
                            Seite 3636 b) collegamento con trasformatore d’ingresso senza presa mediana (senza terra).[...] 
- 
                            Seite 3737 V alori standard per Rv (oppure 2 x Rv): U = Rv 2 x Rv 48 V ± 4 V 3300 Ohm 6800 Ohm Per ragioni di simmetria, le resistenze 2 x Rv possono avere una tolleranza dello 0,5 % al massimo. Se gli ingressi dell’amplificatore sono collegati a terra o se non esiste una trasformazione d’ingresso, bisogna inserire condensatori o trasformatori addi- z[...] 
- 
                            Seite 3838 Dati tecnici C 480 B comb-ULS/61 : Funzionamento: trasduttore a gradiente di pressione Risposta in frequenza: 20 fino a 20.000 Hz ± 1 dB dalla cur va nominale Sensibilità a 1000 Hz – posizione 0 dB: 20 mV/Pa Ⳏ -34 dBV*) – posizione +6 dB: 40 mV/Pa Ⳏ -28 dBV*) – posizione -10 dB: 6,3 mV/Pa Ⳏ -44 dBV*) Direttività: cardioide Livello[...] 
- 
                            Seite 39Rapporto segnale/rumore riferito a 1 Pa (ponderazione A) – posizione 0 dB: 83 dB – posizione +6 dB: 81 dB – posizione -10 dB: 77 dB Livello di pressione acustica limite per un coefficiente di distorsione armonica di 0,5 % – posizione 0 dB: 200 Pa Ⳏ 140 dB SPL**) – posizione +6 dB: 100 Pa Ⳏ 134 dB SPL**) – posizione -10 dB: 316 Pa ?[...] 
- 
                            Seite 4040 Dati tecnici C 480 B + CK 62 - ULS Principio del trasduttore: microfono a pressione Diagramma polare: omnidirezionale T utti gli altri dati sono identici a quelli del C 480 B + CK 61 - ULS C 480 B + CK 63 - ULS Principio del trasduttore: microfono a gradiente di pressione Diagramma polare: ipercardioide T utti gli altri dati sono identici a quel[...] 
- 
                            Seite 4141 Dati tecnici Preamplificatore C 480 B Risposta in frequenza: da 10 fino a 30.000 Hz ± 0,3 dB T ransconduttanza del filtro d’attenuazione dei bassi: 12 dB/ottava, in tutte le posizioni Amplificazione: +6 dB, 0 dB, -10 dB, commutabile Impedenza elettrica: ≤ 150 Ω Impedenza di carico raccomandata: 2000 Ω // 1 nF (IEC 268-15 A) Sensibilità[...] 
- 
                            Seite 42Sus caracteristicas principales son: • Linealidad especial en relación con la respuesta de frecuencia, caracteristicas de transferencia eléctrica • Bajo ruido propio • Alta seguridad de funcionamiento • Pocas distorsiones • Consumo de energía muy reducido • Estabilidad excepcional de larga duración • Conmutador integrado para prea[...] 
- 
                            Seite 43El micrófono se suministra con los accesorios siguientes: Para C 480 B comb-ULS/61: • SA 40 Adaptador de soporte elástico • W 32 Pantalla antiviento de gomaespuma • Cur va frecuencia original Para C 480 B: • SA 40 Adaptador de soporte elástico Accesorios recomendados: H 30 Suspensión elástica H 38 Supsensión elástica SA 38/H Adaptado[...] 
- 
                            Seite 44posibilidad de elevar la preamplificación en +6 dB ofrece una gran ventaja, especialmente con la uti- lización de la cápsula direccional CK 69-ULS, ya que con ello – y debido a las mayores distancias entre la fuente sonora y el micrófono – el nivel útil que se puede obtener en el micrófono será menor . El cor te de bajos conmutable en el[...] 
- 
                            Seite 4545 Alimentación de corriente: El preamplificador C 480 B puede ser alimentado con fuentes de alimentación fantasma según la norma DIN 45596. Esta norma prescribe una ten- sión positiva de 48 V en las lineas de baja frecuen- cia contra el blindaje del cable. Se recomiendan las conexiones siguientes: a) Conexión con transformador de entrada con [...] 
- 
                            Seite 4646 b) Conexión con transformador de entrada sin toma central (sin toma de tierra).[...] 
- 
                            Seite 4747 V alores normalizados para Rv (2 x Rv): U = Rv 2 x RV 48 V ± 4 V 3300 Ohm 6800 Ohm Las resistencias 2 x Rv deben tener como máximo una tolerancia de un 0,5 % para que se cumplan las normas de simetría. Si las entradas de los amplificadores están puestas a tierra o no tienen transformadores de entrada deben incorporarse condensadores o transf[...] 
- 
                            Seite 48Datos técnicos C 480 B comb-ULS/61: Principio transductor: receptor a gradiente de presión Gama de frecuencia: 20–20.000 Hz ± 1 dB de la cur va de régimen Sensibilidad a 1000 Hz – Posición 0 dB: 20 mV/Pa Ⳏ -34 dBV*) – Posición +6 dB: 40 mV/Pa Ⳏ -28 dBV*) – Posición -10 dB: 6,3 mV/Pa Ⳏ -44 dBV*) Diagrama polar: cardioide Nivel d[...] 
- 
                            Seite 4949 Relación señal/ruido referido a 1 Pa (pond. A) – Posición 0 dB: 83 dB – Posición +6 dB: 81 dB – Posición -10 dB: 77 dB Presión sonora limite para 0,5 % THD – Posición 0 dB: 200 Pa Ⳏ 140 dB SPL**) – Posición +6 dB: 100 Pa Ⳏ 134 dB SPL**) – Posición -10 dB: 316 Pa Ⳏ 144 dB SPL**) Gama de volumen (pond. A) – Posición 0[...] 
- 
                            Seite 5050 Datos técnicos C 480 B + CK 62 - ULS Funcionamiento: transductor de presión Diagrama polar: omnidireccional T odos altros datos son idénticos a los des C 480 B + CK 61 - ULS C 480 B + CK 63 - ULS Funcionamiento: transductor de gradiente de presión Diagrama polar: hipercardioide T odos altros datos son idénticos a los des C 480 B + CK 61 - U[...] 
- 
                            Seite 5151 Datos técnicos C 480 B preamplificador Gama de frecuencia: 10–30.000 Hz ± 0,3 dB Escarpadura del filtro de atenuación de graves: 12 dB/octava en todas las posiciones Amplificación: +6 dB, 0 dB y -10 dB, conmutable Impedancia eléctrica: ≤ 150 ohm Impedancia de carga recomendada: 2000 ohm // 1 nF (IEC 268-15 A) Sensibilidad al zumbido a 5[...] 
- 
                            Seite 52Printed in Austria on recycled paper. 08/98/9100 U 0942 T echnische Änderungen vorbehalten. Specifications subject to change without notice. Ces caractéristiques sont susceptibles de modifications. Ci riserviamo il diritto di effettuare modifiche tecniche. Nos reservamos el der echo de introducir modificaciones técnicas. Mikrofone · Kopfhörer [...] 

