Allnet ALL6400pro Bedienungsanleitung

ALLNET ALL6400PRO User’s Manual[...]

2 Copyright and T rademark Notice ALLNET and other names of ALLNET prod ucts are registered trademarks of ALLNET GmbH. Microsoft, Windows, an d the Windows logo are registered trademarks of Microsoft Corporation. Appl e, iTunes and Apple OS X are registered trademarks of Apple Computers, Inc. A ll other trademarks and brand names are the property o[...]

3 Safety W arnings For your safety, please read and fo l low the foll owing safety warni ngs: Read this manual t horoughly befo re attempting to set up your ALL6400PRO. Your ALL6400PRO is a complicated el ectronic devi ce. DO NOT attempt to repair it under any circumstances. In the case of malfunction, turn off the power immediately and have it rep[...]

4 T able of Content s Copyright and Trad emark Notice ................................................... 2 About This Manual ......................................................................... 2 Limited Warranty........................................................................... 2 Safety Warnings ......................................[...]

5 Disks Inform ation ............................................................................... 25 S.M.A.R.T. In formation ............................................................................... 26 RAID Inform atio n ............................................................................... 27 RAID Configuration ..................[...]

6 Download Manager .............................................................................. 58 Adding an H TTP Task .......................................................................... 59 Adding an FTP Task ............................................................................ 62 Adding a BT Task...................................[...]

7 RAID 0 .............................................................................................. 93 RAID 1 .............................................................................................. 94 RAID 5 .............................................................................................. 94 RAID 6 ..........................[...]

8 Chapter 1: Introduction Overview Thank you for choosing the A LLNET A LL6400PRO NAS DiskSe rver. The ALLNET ALL6400PRO is an easy-to-use storage server that allows a dedicated approach to storing and distributing data on a n etwork. Data reliabili ty is ensured with RAID features that provide data security and recovery—over one Terabyte of stor[...]

9 Superior Power Management ALL6400PRO supports schedule power on/o ff. With this feature, administrator can set at what time to turn on or off the system. T his feature is a big pl us for people who want to conserve energy. Wake-On- LAN enables administrator to remotely turn on the system without even leaving their own seat. To schedule system on [...]

10 Front Panel The ALL6400PRO’s front panel displays the unit’s array of status LED’s and is also where you’ll find the power buttons . See the ta ble below for a detailed explanation of each: Hard Disk Tray The ALL6400PRO’s hard disk trays each have a lock, a latch, and two indicators. Item Description HDD Trays • There are four hard d[...]

11 Rear Panel The rear panel of the ALL6400PRO houses the USB and Ethernet co nnections, as well as the power connector. See the ta ble below for descriptions of each: Item Description Power Connector • Connect the included power cord to this connector WAN Port • WAN port for connecting to an Ethernet network through a switch or router LAN Port[...]

12 Chapter 2: Hardware Inst allation Overview Your ALL6400PRO is design ed for easy installation. T o help you get started, the following chapter will help you quickl y get your ALL6400PR O up and running. Please read it carefully to prevent damaging your un it during installat ion. Before You Begin Before you begin, be sure to ta ke the following [...]

13 Cable Connections Make the following connec tions on the ALLNET ALL6400PRO and then power up the unit: 1. Connect an Ethernet cable from your network to the WAN port on the back panel of the ALL6400PRO. 2. Connect the provided p ower cord into the universal power socket o n the back panel. Plug the other end of th e cord into a surge protected s[...]

14 Chapter 3: First T ime Setup Overview Once the hardware is installed, ph ysically connected to your network , and powered on, you can configure the ALL6400PRO so that it is accessible to your network users. There are two ways to set up your ALL640 0PRO: using the ALLNET Setup Wizard or the LCD display . Follow the steps below for initia l softwa[...]

15 5. Login with the administrator accoun t and password. The default account and password are both “ admin ”. 6. Name your ALL6400PRO and configure the ne twork IP address. If your switch or router is conf igured as a DHCP Server, configu ring the ALL6400PRO to automatically obtain an IP add ress is recommended. You may also use a static IP ad[...]

16 8. Finished! Access the ALL 6400PRO Web Administrator Interface by pressing the Start Browser button. You can also configure another ALL6400 PRO at this point by click ing the Setup Other Device button. Press Exi t to exit the wizard. LCD Operation The ALL6400PRO is equipped wi th an LCD on the front for easy status displ ay and setup. There are[...]

17 Host Name Current host name of the system. WAN Current WAN IP setting. LAN Current LAN IP setting. Link Aggregation Current Link Aggregation status Disk Info Current status of disk slot has been installed RAID Current RAID status. System Fan Current system fan status. 2006/06/16 12:00 Current system time. The ALL6400PRO will rotate these messa g[...]

18 Step 3: Create Local Users or Setup Authentication Once the RAID is ready, you can begin to create local users for the ALL6400PRO, or choose to setup authentication protocols such as Acti ve Directory (AD). For more on managing users, go to Chapter 4: Syste m Management > User and Group Mana gement . For more information on conf iguring Activ[...]

19 Chapter 4: System Management Overview The ALL6400PRO provides an easily accessible Web Ad ministration Interface . With it, you can configure and monitor th e ALL6400PRO anywhere on the network. Web Administration Interface Make sure your network is connected to the I nternet. To access the ALL6400PRO Web Administration Interface : 1. Type the A[...]

20 Language Selection The ALL6400PRO supports multiple languages, including: • English • French • German • Italian • Traditional Ch inese • Simplified Chinese • Japanese • Korean • Spanish On the menu bar, click Language and the Change Language screen appears. This screen allows you to select pref erred language for the ALL6400PRO[...]

21 System/Service Status From the Status menu, choose the System item, and the Syst em Status and Service Status screens appear. These screens provide basic system and service status inf ormation. System Status Item Description CPU Loadin g (%) Displays CP U worklo ad of t he ALL640 0PRO. System Fan Speed Displays the current status of the system f[...]

22 Printer Status From the Status menu, choose the Printer item, and the Printer Information screen appears. This screen provides the following information about the USB printer connected to the USB port. Printer Status Item Description Manufacturer Displays the name of the USB printer manufacturer. Model Displays t he mode l of the USB p rinter. S[...]

23 Battery Status Current status of the UPS battery Power Current status of the power being supplied to the UPS Seconds between power failure and firs t noti ficati on Delay between power failure and first notificati on in seconds. Seconds between subsequent power failure notifications Delay between subsequent notifications in seconds. Shutdown the[...]

24 Then, simply choose an on a nd off time for each day of the week that you would like to designate a schedule by using the various dropdowns. Finally, click Ap ply to s ave your changes. Example - Monday: On: 8:00; Off: 16:00 System will turn on a t 8: 00 AM on Monday, a nd off at 16:00 on Mond ay. System will turn on for the rest of the week. If[...]

25 Storage Management The Storage Menu displays the status of storage dev ices installed in th e ALL6400PRO, and includes storage configur ati on options such as RAID and disk settings, folder configuration, and Nsync settings. Disks Information From the Storage menu, choose the Disks item and the Disks Information screen appears. From here, you ca[...]

26 S.M.A.R.T. Information On the Disks Inform ation screen, the status of each disk will be displayed in the Status column. Clicking on an OK or Warning link will di splay the S.M.A.R.T Information window fo r that particular di sk. S.M.A.R.T. Information Item Description Tray Numb er Tra y the hard disk is in stalle d in. Model Model name of the i[...]

27 RAID Information From the Storage menu, choose the RAID item and the RAID List screen appears. To configure your RAID settings, press the RA ID Config button to go to the RAID Configuration screen. RAID Information Item Description RAID Level Shows the current RAID configuration. Status Indicates status of the RAID. Can read either Healthy , Deg[...]

28 RAID Level You can set the storage volume as JBOD , RAID 0 , RAID 1 , RAID 5, RAID 6 or RAID 10 . RAID configuration is usually requir ed only when yo u first set up the device. A brief description of each RAID setting follows: RAID Levels Level Description JBOD The stor age volume is a single HDD wit h no RAID s upport. J BOD requires a minimum[...]

29 RAID Settings Using Disk Settings , you can select stripe size, choose which disks are RAID disks or the Spare Disk, as well as enter a name for each di sk. Disk Settings Item Description RAID Check the boxes of the hard drives you wish to add to the storage volume. Spare Check a box to designate the replacement HDD for the storage volume. This [...]

30 4. On the RAID List screen, select the RAID volu me by clicking on its radio button, and cl ick RAID Config to open the RAID C onfigura tion screen. 5. On the RAID Configuration screen, click Expand . Migrating a RAID Once a RAID volume has been created, you may want to move it to other physical driv es or change the RAID array all together. To [...]

31 Deleting a RAID To delete a RAID volume, f ollow the steps below: 1. On the RAID List screen, select the RA ID volume by clicking on its radio button, and cl ick RAID Config to open the RAID C onfigura tion screen. 2. On the RAID Configuration screen, click Remove RAI D . 3. The confirmation screen appear, you will have to in put “Yes” with [...]

32 Adding Folders On the Folder screen, press the Add button and the Ad d Folder scree n appears. This screen allows you to add a folder. After entering the information, press Apply to create new folder. Press Back to return to the Folder screen. Add Folder Item Description Folder Name Enter the name of the folder. Descrip tion Provid e a de script[...]

33 beyond this limit. You can enter a 0 to turn off the share folder limit. Submit Press Submit to save your changes. Back Press Back to return to the Folder screen. Deleting Folders To delete a folder, press the Del button from the specified folder row. The syste m will confirm folder deleti on. Press OK to delete the folder permanently or Canc el[...]

34 Folder Access Control List (ACL) On the Folder screen, press the ACL button, and the Access Control List screen appears. This screen allows you to configure access to the specific folder for users and groups. Select a user or a group from the left hand col umn and then choose Deny , Read Only , or Writable to confi gure their access level. Press[...]

35 2. From the drop down select the group you would like to search for the user in. 3. Click Search . File System Check The File System Check allows you to perform a check on the in tegrity of your disks’ file system. Under the Stora ge menu, click Filesystm Check and the File System Check prompt appears. To perform a file system check, click App[...]

36 Once you click Next , yo u will see the following screen: Click Start to begin the file sy stem check. Click Ba ck to return to the previous screen. Click Reboot to reboot the system. When the file system check is run, the syst em will show 20 lines of inf ormation until it is complete. Once complete, the resu lts will be shown at the bott om. A[...]

37 File Access Cache File Access Cache is default En able . This option will help to increase th e performance while sing le client access share folder in writi ng under SMB/CIFS protocol. Samba Recycle Bin The ALL6400PRO is supported recycle bin via SMB/CIFS protocol. Simply enable it then all of deleted files/ folders will reside in the “ .recy[...]

38 WAN Configuration Item Description Host name Host name that identifies the ALL6400PRO on the network. Domain name Specifies the domain name of the ALL6 400PRO. MAC Address MAC address of the network interface. Jumbo Frame Support Enabl e or disable Jumb o Frame Support of the WAN interface on your ALL6400PRO. DHCP Enable or disable the ALL6400 P[...]

39 LAN Configuration Item Description MAC Address Displays the MAC address of the LAN interface. IP Specifies the IP address of the LAN i nterface. Netmask Specifies the Network Mask of the LAN interface. Jumbo Frame Support Enable or disable Ju mbo Frame Support on the LAN interface. DHCP Configuration A DHCP server can be configured to assi gn IP[...]

40 AFP (Apple Network Setup) From the Netwo rk menu, choose the AFP item, and the AFP Configuration screen appears. This screen displays the configuration items for the Apple Filing Protocol. You can change any of these items and press Apply to confirm your settings. A description of each item follows: Apple Network Configuration Item Description A[...]

41 User and Group Management The ALL6400PRO has built-in user database that allows administrators to manage user access using different group policies. From the Accounts menu, you can create, modify, and delete us ers, and assign them to gr oups that you designate . Local User Configuration From the Accounts me nu, choose the Users item, and the Lo[...]

42 Modifying Users 1. Select an existing user from t he Local User Configurat ion screen. 2. Click on the Modify button, an d Local User Setting scree n appears. 3. From here, you can enter a new password a nd re-enter to confirm, or use the << or >> buttons to have this u ser join or leave a group. Click the Apply button to save your c[...]

43 1. On the Local Group Configuration screen, click on the Add button. 2. The Local Group Setting screen appears. 3. Enter a Group Name . 4. Enter a Group ID num ber. If left blank, the system will automatically assign one. 5. Select users to be in this group from the Users List by adding them to the Members List usi ng the << button. 6. Cli[...]

44 ADS Configuration If you have a Windows Active Directory Server (ADS) to handle the domain security in your network, you can simpl y enable the ADS suppo rt feature; t he ALL6400PRO will connect with the ADS server and get all the informat ion of the domain users and groups automatically. From the Accounts me nu, choose Authentication item and t[...]

45 ADS Support Enable ADS Server Name Computer1 ADS Realm Domain.local Administrator ID Administrator Administrator Password *********** Confirm Password *********** System Settings The System menu giv es you a weal th of settings that yo u can use to confi gure your ALL6400PRO’s system administrati on functions. You can set up system notificatio[...]

46 Receiver’s E-mail Address Add one or more recipient’s email addresses to re ceive email notifications. E-Mail Test Click to send out a test e-mail to make sure the settings are correct. System Logs From the System menu, choose the Logs item and the Syst em Logs screen appears. This screen shows a history of system usage and impo rtant events[...]

47 Time Item Description Date Sets the system date. Time Sets the system time. Time Zone Sets the system time zone. NTP Server Select Yes to allow the ALL6400PRO to synchronize with the NTP server shown below. Select Manually to allow the ALL6400PRO to synchronize with an NTP server of your choice. Select No to not have the ALL6400PRO to synchroniz[...]

48 modules to extend the functi onality of your ALL6400PRO. Module Management Item Description Name Displays the name of the module. Version Displays t he modu le version . Description The description of the module. Enable Displays whe ther the module has b een enab led or no t. Status Di splays the status of the module. Uninstal l Click to unins t[...]

49 3. The beeper beeps and the Busy LED b links until the upgrade is complete. Change Administrator Password From the System menu, choose the Administrator Password item and the Change Administrator Password screen ap pears. Enter a new password in the New Password box and confirm your new password in t he Confirm Password box. Press Apply to confi[...]

50 Logout To logout of the Web Admi nistration Interface, navi gate to System > Logout .[...]

51 Chapter 5: Additional Feature Setup Overview The ALL6400PRO can also act as an FTP Server, allowing employees and clients to transfer files u sing their favorit e FTP programs. The integrat ed Print Server allo ws you to share a single USB printer will all users on the netw ork. The following section shows you how. FTP Server ALL6400PRO can act [...]

52 To access the share folder on the ALL 6400PRO, use the appropriate user login and password set up o n the Us ers page ( Accounts > Users ). Access control to each share folder is set up on the ACL page ( Stora ge > Folder > ACL ). iTunes® Server With the built-in iTunes server capabili ty, the ALL6400PRO enables digital music to be sha[...]

53 With the ALL6400PRO’s built -in media server capabili ty, you can share digital media such as music, pictures, and movies with any compatible device throughout your entire home. To configure the media server, under th e Network menu, cl ick Media Server and the Media Manager Settings w indow will appear. A description of each field follows: Me[...]

54 Connecting DMAs to the Media Server Next, it’s time to con nect your Dig ital Media Adapter (DMA) to the m edia server: 1. Connect your DMA to your Medi a Server a. Configure your DMA to use a Dynami c IP address. The IP address will be assigned by the router. b. Some DMAs are wireless enabled. You can connect the DM A to a wireless router. Fo[...]

55 8. Your Windows system wi ll ask you if you want to set thi s printer as “Default Printer”. Select Yes and all your print jobs will be submitted to this printer by default. Click Next . 9. Click Finish . Windows Vista To set up the Printer Server in Windows Vista, follow the st eps below: 1. Open Printer Folder from the Control Panel . 2. Cl[...]

56 3. Select Add a network, wireless o r Bluetooth printer . 4. Select The printer that I want isn’t listed . You can press Th e printer that I want isn’t listed to go i nto next page without waiti ng for Searching for available printers to fi nish. 5. Click Select a shared printer by name .[...]

57 Type http://<ALLNET_NAS>:631/printers/usb-printer in the box, where <ALLNET_NAS_IP> is the IP address of the ALL6400PRO. Click Next . 6. Select or install a printer and th en press OK . If your printer model is not listed, please contact your printer manufacturer for help. 7. Windows will attempt t o connect to the prin ter. 8. You c[...]

58 9. Done! Click Finish . Download Manager With the built-in Downl oad Manager, you can have the AL L6400PRO download HTTP, F TP, and BT files without having f ull PC powered on. What’s more, you can even schedule your downloads for off-peak ho urs, ensuring efficient use of bandwidth. To access the Download Manager, go to Network , choose the D[...]

59 Adding an HTTP Task To add a new HTTP task to the Do wnload Manager, fol low these steps: 1. Using the Task Type dropdown, select HTTP and click Add Task . 2. In the HTTP Task window, start by i nputting the target U RL in the Website URL box. This is the lin k to the download you want to queu e.[...]

60 3. Next, select th e destination folder f rom the Destination Folder dropdown. This is where the dow nload will reside. 4. Select the maximum downlo ad bandwidth from the Max. Down load Bandwidth dropdown. 5. Press Apply to add th e task.[...]

61 6. Once added, your download wi ll appear in the list of dow nload tasks. To start the download, simply click the Start icon ( ) and the download w ill begin. 7. The download statu s will continuall y update in the Download Tasks window. To pause the download, click the Pause icon ( ).[...]

62 Adding an FTP Task To add a new FTP task to the Down load Manager, follow these steps: 1. Using the Task Type dropdown, select FTP and click Add Task . 2. In the FTP Task window, start by inputting the target URL in the FTP File box. This is the link to the download you want to qu eue.[...]

63 3. Next, select th e destination folder f rom the Destination Folder dropdown. This is where the dow nload will reside. 4. The next step depends i f you are using an ano nymous login for your F TP download. If you are loggin g in anonymously, select Anonymous Login and move on to step 5.[...]

64 If you are required to login with a user name and password, select Username and input your user name and password into the appropriate fields. 5. Select the maximum downlo ad bandwidth from the Max. Down load Bandwidth dropdown. 6. Press Apply to add th e task.[...]

65 7. Once added, your download wi ll appear in the list of dow nload tasks. To start the download, simply click the Start icon ( ) and the download w ill begin. 8. The download statu s will continuall y update in the Download Tasks window. To pause the download, click the Pause icon ( ).[...]

66 Adding a BT Task To add a new BT task to the Download Manage r, follow these steps: 1. Using the Task Type dropdown, select BT and click Add Task . 2. In the BT Task window, start by clicking Browse… a nd selecting the torrent file you wi sh to start.[...]

67 3. Next, select th e destination folder f rom the Destination Folder dropdown. This is where the dow nload will reside. 4. Next, you can select the maxi mum an d minimum number of peers from selecting the counts from the appropriate dropdowns.[...]

68 5. Next, you can set the maximum downlo ad and upload bandwidths from the dropdowns below. 6. Press Apply to add th e task. 7. Once added, your download wi ll appear in the list of dow nload tasks. To start the download, simply click the Start icon ( ) and the download w ill begin.[...]

69 8. The download st atus will continuall y update in the Download Task s window. To pause the download, click the Pause icon ( ). Deleting Tasks To delete a task, simply follow the steps below: 1. Click the delete icon ( ) beside the task that you wish to delete. The Delete Task dialogue box will appear. 2. Select Delete Task only if you wish to [...]

70 To schedule downloads, follow these steps: 1. Under Download Schedule , set Scheduler to Enable . 2. To schedule a daily download period, select Daily and select a start time and end time. To schedule a weekly download period, select Weekly and select a start day/time and end time/day. 3. Click Apply to save your changes. NOTE If the Download Sc[...]

71 Chapter 6: Using the ALL6400PRO Overview Once the ALL6400PRO is setup and operat ing, users on the network may manage all varieties of photos, or files by simp ly using their web browsers. To manage your personal photos or access private/public files on the A LL6400PRO, just enter its IP address into your brow ser (default IP address is http://1[...]

72 Folder Page Buttons Button Description Up Goes to the previous folder level. New folder Creates a new folder. New file (upload) Uploads a file from your computer to the current folder. Delete Selected Items Deletes selected files and folders. 6. To create a new folder withi n the current folder, press the New folder button. When the screen appea[...]

73 2. The XP Web Publishing Wizard Client screen appears. Click on the link to install the Pu blishing Wizard. 3. Windows XP will ask w hether you want to run or save this file. Click Save to save the register file. . 4. Once the register file is installed, use t he Windows file manager to brow se the folder that contain s the picture you want to p[...]

74 5. Click on this icon and Web Publishing Wizar d will start. 6. Select the pictures y ou want to publis h to the Photo Web Server by placing a check mark on the top left hand corner of the picture. Click Next . 7. Your PC will start to conne ct to the Photo Web Server. 8. Select ALL6400PRO Photo Gallery Wizard to publ ish your pictures to the AL[...]

75 9. Login into the ALL6400PRO with your local user name and password. 10. Create your album by entering an a lbum name and cli cking on the Cre ate Album button. 11. Select the album you w ant to upload your pi ctures to.[...]

76 12. Confirm the target album. 13. Windows will show y ou that the picture upload is in progress. 14. When the upload is finished, the Wiza rd will ask you whether if you want to go to the website. Click Finish to go to your Photo Web Server. 15. Click on the user’s icon to go to tha t user’s album.[...]

77 16. You will see the user’s album list. C lick on Album . 17. Finished! You will see the pictures just sele cted in the al bum.[...]

78 Managing Albums and Photos Photo Icon Function Description Make Cover Make selected photo your cover picture. Back Return to the previ ous screen. Add Add a new album or photos. Modify Edit the name and description of the sel ected album or photo. Each name is limited to 20 characters and each description is limited to 255 characters. Delete Del[...]

79 EXIF Information While viewing pictures, you can also have the ALL6400PRO display the EXIF information for each photo. Simply click the EX IF button to display E XIF information. To hide this information, click the EXIF button again. Slide Shows Slide shows are a great way to enjoy pi ctures stored on your ALL6400PRO. You can click on the Start [...]

80 Mapping a Client PC to the ALL6400PRO You can map share folders on the ALL6400PRO so that you can access them as if they were drives on your computer. You can c onnect to the shared ne twork folders on the ALL6400PRO as follows: Windows 1. Go to the My Computer folder in Windows. 2. In the menu bar, select Tools and then Map Network Drive… 3. [...]

81 ALL6400PROs, you have the option to transmit files securely between two ALL6400PROs. If the files on your ALL6400PRO are lost for any reason, you can restore those files from the target ALL6400PRO. To backup files regularly, you can set up a sc heduled task to run only once, daily, weekly, or mo nthly. You can also l imit the bandwidt h of your [...]

82 Setting Up an Nsync Target on an Nsync Device On the Nsync target server, the administrator of that se rver has to se t up a user account with a fol der named “n sync” and gra nt write access. 1. On the Nsync server, add a user for Nsync source (ex. nsyncsource1). For instructions on how to add a user on the ALL6400PRO, see Chapter 4: System[...]

83 ALLNET Backup Utility The ALLNET Backu p Utility is on your Inst allation CD. When you click on the CD, the Backup Utility will be installed u nder Program Groups > ALLNET > ALLNET Backup Utility . If it is not installed, y ou can copy the file ( ALLNET Backup Utility.exe ) to a convenient location on you r hard disk and double click to ex[...]

84 5. Double-click Ntbackup.msi to install th e backup utility. Once installed, y ou can use the Windows Backup Utilit y by following th e steps below: 1. Click Start , and point to All Programs > Accessories > System Tools > Backup to start the wi zard. 2. Click Next to skip past the opening page. Choose Backu p files and settings from th[...]

85 Adding a Spare Disk With a RAID 1 or RAID 5 volume, you ca n add a spare disk afte r the initial RAID is setup. To add a spare disk, follow the steps below: 1. On the RAID Configuration Scre en , tick the checkbox of the hard disk you wish to designate as a spare di sk. 2. Click Add Spare . The disk will be conf igured as a spare disk. The syste[...]

86 Part III - Setting up Firewall Rules 1. Navigate to Firewall Rules 2. Click on the bu tton Add 3. Select the service HTTPS 4. Enter the IP-address of the ALL640 0PRO 5. Click Save 6. Test the HTTPS connection from a nother computer on the Internet Firewall Software Configuration If you are using a software firewall (i.e. Norton Internet Secu rit[...]

87 2. On the Programs page, find the SetupWizard.exe and change its permission to "Permit All" . If it's not in the program list, use the Add or Program Scan buttons to fi nd it. 3. On the Networking page, manually add ALL6 400PRO IP address (i.e. 192.168.1.100 ) to the Trusted list. Replacing Damaged Hard Drives If you are using RAI[...]

88 Chapter 8: T roubleshooting Forgot My Network IP Address If you forget your netw ork IP address an d have no physical access to the system , you can find out the IP address by either looking directly onto the ALL6400PRO’s LCD panel, or by using the setup wizard to retrieve the IP of your ALL6400PRO. 1. Start the Setup Wizard, and it will autom[...]

89 In addition, if the ALL6400PRO is able to access the Internet and you want to keep the NTP Server clock.i sc.org by defa ult, please make sure the DNS Server i s correctly entered, thereby allowi ng the NTP Server name to correctly resolve. (See Network > WAN > DNS S erver )[...]

90 Appendix A: Product S pecifications Hardware Specifications Product Model ALL6400PRO Core Processors / Memory Processor AMD LX800 500Mhz Memory 256MB DDR400 SODIMM Network Interfaces WAN Gigabit RJ-45 connector LAN Gigabit RJ-45 connector Storage HDD Bays 4 x 3.5” SATA II HDD, hot-swappabl e HDD Support SATA II HDDs up to 1000GB I/O Interfaces[...]

91 Auto rebuild Hot swappable Hot spare Disk roaming RAID level migration RAID expansion Folder Management Share folder level perm ission Public folder Quota Management Share folder quota control Backup ALLNET Backup Utility (Windows XP/2000 and MAC OS X) ALLNET Nsync System Management Web GUI Multilingu al support (English, French , German, Italia[...]

92 Appendix B: Customer Support If your ALL6400PRO is not working prop erly, we encourage you to check out Chapter 8: Troublesh ooting , located in this manual. You can also try to ensure that you are using the latest firmware version for your ALL6400PRO. ALLNET is committed to providing free firmware upgr ades to our customers. Our newest firmware[...]

93 Appendix C: RAID Basics Overview A Redundant Array of Independent Disks (RAID) is a n array of several hard di sks that provide data security and high perf ormance. A RAI D system accesses several hard disks simultaneously, which improves I/O performance over a single h ard disk. Data securi ty is enhanced by a RA ID, since data loss due to a ha[...]

94 RAID 1 RAID 1 mirrors all data from one hard di sk drive to a second one hard disk drive, thus providing complete data redundancy . Ho wever, the cost of data storage capacity is doubled. This is excellent for complet e data security. RAID 5 RAID 5 offers data secu rity and it is best s uited for networks that perform many small I/O transactions[...]

95 Disk Usage When all 5 disks are of the same size, and used in RAID, ALL6400PR O disk usage percentage is listed below: RAID Level Percentage Used RAID 0 100% RAID 1 20% RAID 5 80% RAID 6 60% RAID 10 50% JBOD 100% NOTE RAID 10 allows only 4 disks and one as spare disk.[...]

96 Appendix D: Active Directory Basics Overview With Windows 2000, Microsoft intro duced Ac tive Directory (ADS), which is a large database/information store. Prior to Active Directory the Wi ndows OS could not store additional informat ion in its domain database. Active Directory also solved the problem of locating resources; wh ich previously rel[...]

97 Appendix E: UPS Comp atibility List Brand Series Model Notes Ablerex MS-RT ActivePower 1400VA AEC MiniGuard UPS 700 M2501 cable Back-UPS Pro Matrix-UPS Smart-UPS Back-UPS 940-0095A/C cables, 940-0020B/C cables , 940-0023A cable Back-UPS Office 940-0119A cable Masterswitch Not a UPS - 940- 0020 cable APC Back-UPS RS 500 custom non- USB cable Regu[...]

98 Brand Series Model Notes PowerRite MAX Fiskars PowerServer 10, 30 All models with alarm interface MP110/210 MS-T MS Gamatronic µPS3/1 Gemini UPS625/UPS1000 R3000 XR HP R5500 XR INELT Monolith 1000LT Infosec iPEL 350, 500, 750, 1000 Ippon (various) Liebert UPStation GXT2 contact-closure cable Masterguard (various) HF Line 1..4 boards, / 2 5..8 b[...]

99 Brand Series Model Notes TrustTrust 425/625 BNT-1000AP Advice Partner/King Pr750 Powercom BNT-2000AP PowerGuard PG-600 PowerKinetics 9001 PowerTech Comp1000 DTR cable power Power Walker Line-Interactive VI1000 Powerware 3110, 3115, 5119, 5125, 5119 RM, PW5115 PW5125PW9120, PW9125, 9120, 9150, 9305 Powerwell PM525A/-625A/-800A/-1000A/ - 1250A RPF[...]

100 Appendix F: Licensing Information Overview This product included copyrighted third- party software licensed under the terms of GNU General Public License. Please see THE GNU General Public License for extra terms and conditions of this license. Source Code Availability ALLNET GmbH. has exposed the full source code of the GPL licensed software. [...]

101 CGIC License Terms Basic License CGIC, copyright 1996, 1997, 1998, 1999, 200 0, 2001, 2002, 2003, 2004 by Thomas Boutell and Boutell.Com, Inc. Permission is granted t o use CGIC in any application, commercia l or noncommercial, at no cost. HOWEV ER, th is copyright para graph must appear on a "credits" page accessible in t he public o[...]

102 Also, for each author's protection and our s, we want to make certain that everyone understands that there is no warran ty for this free software . If the software is modified by someone else an d passed on, we want its recipients to know that what th ey have is not the orig inal, so that any problems int roduced by others will not reflect[...]

103 c) If the modified program normally re ads commands interactively when run, you must cause it, when started runni ng for such interacti ve use in the most ordinary way, to pr int or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that user[...]

104 operating system on which the executable runs, unle ss that compo nent itself accompanies the executable. If distribution of executable or object co de is made by offering access to copy from a designated place, then offeri ng equivalent access to copy the source code from the same place counts as di stribution of the source code, even though t[...]

105 This section is inten ded to make thoroughly clear wh at is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restri cted in certain countries either by patents or by copyrighted in terfaces, the original copyright holder who places the Program under this License m ay add an explicit g[...]

106 Germering,11.12.08 EC – Declaration of confor mity for ALL6400PRO This equipment conforms with th e requirements of the Coun cil Directive 89/336/EEC on the a pproximation of the laws of the member states relating to Radio an d Telecommunication Terminal Equipment and the mutual recogn ition of their conf ormity. The safety advice in the docu[...]