American Dynamics ADMPCPU Bedienungsanleitung

8200-0421-03 G MegaPower ® CPU ADMPCPU Administrator’s Guide[...]

[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 1 of 82 MegaPower ® CPU Administrator’s Guide Figure 1. MegaPower 3200 Video-Matrix Closed -Circuit Television (CCTV) S ystem About the Product The MegaPower CPU (Central Pro cessing Unit) is the control unit for the MegaPower 3200 video-matrix closed-circuit television (CCTV) system. It[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 2 of 82 Contents MegaPower ® CPU .................................................... 1 About the Product..................................................... 1 About this Guide ....................................................... 1 MegaPower 3200 Video-Matrix CCTV System (Dual CPU) ...[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 3 of 82 Removing Monitors or Satellite Sites Access from Keyboards............................................ 55 Associating Keyboar ds to Monitors ........................ 55 Adding Keyboard Definitions ............................. 55 Editing Keyboard Definitions ........................[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 4 of 82 MegaPower 3200 Video-Matrix CCTV System (Dual CPU) Figure 3 illustrates a MegaPowe r 3200 video-matrix CC TV system with an optional seco nd MegaPower CPU installed and a computer c onnected for program ming t he system using the EASY ( E nhanced A dministration SY stem) CPU softwar[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 5 of 82 CPU Rear Panel The MegaPower CPU rear panel ( Figure 5) provides data, net work, and power connections. Figure 5. MegaPower CPU—rear pan el MegaPower System Overview The MegaPower 3200 video-m atrix CCTV system is capable of managing cam eras, monitors, alarm events, and video rec[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 6 of 82 • Support for up to 30 satellite systems • Control up to 96,000 remote cameras • Control up to 38,528 remote cameras (full crosspoint conne ction) to 256 monitors • Response to up to 4,096 alarms • Supports up to 64 Tours • Supports up to 64 Salvos • Pseudo camera num [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 7 of 82 • Priority Access – Priority levels assigned to keyboards and users all ow higher priority users to capture and lock out cameras (pan, tilt, lens and auxiliary control) from lo wer priority users. The system allows up to eight priority levels. • Recorder control – Operat ors[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 8 of 82 Initializing the System There are two methods for initializing the MegaPower 3200 video-matrix CCTV system: • Direct connection of a PC to the CPU us ing either an RS-232 port or the Ethernet port • Ethernet connection through an Ethernet network Understanding the Screen Icons T[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 9 of 82 16. Set the PC Com port for the following: • Baud Rate = 1200 bps • Parity = none • Data bits = 8 • Stop bits = 1 17. Click the green che ck ( 9 ) button to accept the settings, and then click the X to close the dialog. Note: You can decrease the file transfe r time by chang[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 10 of 82 4. Switch on the CPU. The LCD screen display s the AD Welcome Screen ( Figure 10), followe d by the CPU Status screen, two example s of which are shown in Figure 11. Figure 10. AD welcome screen Figure 11. CPU status screen or Using an IP Address Assigned by the Network DHCP Server[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 11 of 82 ○ Dual MPCPU: Enter 100 for the selected MegaPower CPU, or enter 101 for the Standby MP CPU. d. Press the Ack key located in the lower right corner. The System Menu appears on the LCD screen ( Figure 12). Note: To exit the LCD Menu Mode, press the Menu key. Figure 12. System Menu[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 12 of 82 capabilities as indicated by the Access Denied message if the following procedure is attempted. a. Press and hold the Shift ( ) button and then press the Menu ( ) button. b. Enter one of the following number sequences for your MegaPower CPU installation: ○ Standalone MPCPU : Ente[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 13 of 82 screens show the sequen ce of operations that take place during a Read cycl e. Figure 22. File transfer in progress screen Figure 23. File transfer completed screen Write Cycle During a Write cycle, data is transferred to the CPU from a PC running EASY CPU. The following screens sh[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 14 of 82 • If you are downloading EASY CPU from a web site or server to the computer, save the zip file to a folder you have chosen, and then unzip the file in that folder. Next, double-click on the file, Setup.exe, to begin installation. The Choose Setup Langu age dialog box appears ( Fi[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 15 of 82 Figure 32. License Agreement scr een 6. In the Customer Information screen ( Figure 3 3), type your user name in the User Name field, and then type your organization name in the Organization field. If you want to install EASY CPU so that anyone can access the appli cation, click th[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 16 of 82 Starting EASY CPU Figure 37. Installation Complete screen To start EASY CPU, do one of the following: • If you want to start EASY CPU immediately following completion of the installation, click the Launch EASY CPU Configurator checkbox in the preceding screen ( Figure 37 ), and t[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 17 of 82 • Time Format – Select a Time Format by clicking either Standard Format (12-hr., a.m. and p.m. display) or Military Format (24-hr. display). • Default MPCPU IP Addre ss – Set the default IP address used for write/read operation s if no IP address is specified as CPU A and C[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 18 of 82 Retrieving Configuration Data Do one of the following: • For a new installation wh ere no co nfiguration data file has been previously created, you should initialize your system by retrieving (reading) into EASY CPU the factory-default configuration data residing in the CPU firmw[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 19 of 82 Figure 42. Write to MPCPU and/or Save Configuration To File dialog 7. In the section labeled MPCPU A and/or B must be specified in Sys => Option s, choose one or both of the following checkboxes depen ding on whether you have a single MPCPU conf iguration or both MPCPUs in a dua[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 20 of 82 11. Choose one of the following: • If you want to enable user logins, go to the section, Addi ng a User Login , on page 21. • If you do not want to enable user logins, your system is ready to use. New Configuration File Note: You must save a new configuration file to your PC be[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 21 of 82 Note: When you click the Write Configuration To Selected MPCPUs and/or Files button, each IP address is checked to e nsure it has a properly formatted IP address. If either IP address has an invalid IP address format, you will receive a warning message. You will need to correct the[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 22 of 82 Logging in Users for CPU Read/Write Access When user logins are enabled, the Login dialog box appears whenever you want to read a configuration file from the CPU or write a configuration file to the CPU. Figure 51. Login dialog 1. In the Login dialog box, enter your user name and p[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 23 of 82 Programming the MegaPower CPU EASY CPU allows you to program the MegaPower CPU from a connected PC. When started, the EASY CPU main screen provides links to all setup features. Figure 52. EASY CPU main screen EASY CPU Main Screen Overview The EASY CPU Main Screen contains the follo[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 24 of 82 Explore Menu The Explore Menu on the left side of the screen allows you to open screens for setting up the following functions: • Status – The Status function allows you to check the status of monitors, cameras, the passive h ot switch and the error log. • System – The Syst[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 25 of 82 • Video State – Indicates the video loss level detected. • Sync State – Indicates wh ether a video sync signal is detected. • Tour No. – Indicates the number of a Tour currently loaded or running on the monitor. • Site No. – Indicates the site (1-30) called to the m[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 26 of 82 If only one MegaPower CPU IP address is specified, the status of that MegaPower CPU is shown. If no MPCPU A or B IP address is specified, the status of the Edit => Preferences default IP addre ss is shown as MPCPU A. Click on the Status – Passive Hot Switch Status link in the [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 27 of 82 The Error Log Status screen provides t he following information: • MPCPU A / MPCPU B – Radio button s that enable you to select and view the error log for the chosen MegaPower CPU. • Fault – An abnormal condit ion detected by the CPU. The system provides status on up to 12 [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 28 of 82 Note: The TFTP server applicatio n must be running in the background of the server for the snapshot feature to work. − Taking a Snapshot : To take a snapshot, first press 4, and then press F1 on a keyboard. The system automatically assigns a file name to the snapshot and saves it[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 29 of 82 Figure 60. System – Date & Time dialog To set the system date and time, complete the following sections: • Set MPCPU’s Date/Time – This se ction contains the following choices: – Set MPCPU w ith current PC date/time – Select this radio button if you want EASY CPU to[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 30 of 82 6. Repeat steps 3 through 5 to set the other date/time fields, as needed. 7. Do one of the following: − To save the n ew date/time settings and then exit, return the keyboard to Operate mode. − To exit without saving the new settings, press Clear , and return the keyboard to Op[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 31 of 82 Figure 62. Dome/PTZ Device Direct Connect Configuration screen The Dome/PTZ Device Direct Connect Configuratio n screen consists of five sections: • The top section contains two checkbox es that control how connections are generally set up. Note: Both checkboxes cannot be che cke[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 32 of 82 Table 1 describes the valid setting values that can be specified for the four port grou ps: Table 1. Valid Port Group settings Direct Connect Settings Description SensorNet/ Manchester 1/2 RS-422/ RS-485 1/2 Dome/PTZ Control: Specifies the port protocol SensorNet or Manchester RS-4[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 33 of 82 You can change an existing Salvo numb er. If the new Salvo number already exists, you will be prompted to choose another numb er or delete the existing one prior to using the new Salv o number. Any cameras and/or alarm conta cts assigned to the previous Salvo numbe r will remain as[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 34 of 82 − Alarm Message – Enter the alarm message number to be associated with the salvo. Note : Alarm messages are first created in the Alarms – Alarm Messages screen. − Email Message – Enter the Email message number to be associated with the salvo. Note : Email messages are fir[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 35 of 82 Figure 69. Tours Preset or Pattern Dropdo wn List o For a Preset number, enter a numeric v alue into the Preset or Pattern field. Ensure there is no prefix displayed as part of the numeric value entered. If the “Pat” prefix is displayed, select “Gene ral Preset Number” from[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 36 of 82 Figure 71. Event timer–Alarm Tables tab screen To schedule Alarm Monitor/Contact tables, you will need the following information: • The hour of the day/night you want the table to be active • The day(s) of the week you want the table to be active • The number of the desired[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 37 of 82 Configuring Alarms The MegaPower CPU can respond to 4,096 alarm s by calling cameras, salvos, or Pre sets to armed monitors and turning aux iliary devices on or off. These alarm responses ar e defined in tables called Alarm Monitor/Contact Tables. EASY CPU provides one master Alarm[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 38 of 82 • Typ e – Defining the type of monitor determines how the monitor treats inco ming alarms. From a dropdown list, you can defi ne each monitor as: − Single – incoming alarms are displaye d on a single monitor. Multiple alarms re ceived at a single monitor will be eith er seq[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 39 of 82 Contact Arming The Contact Arming screen enabl es you to assign a group of contacts in an alarm table to a monitor. Figure 77. Contact Arming screen To begin assigning a grou p of contacts to a monitor from the Alarms – Monitor screen: 1. Click on a monitor. 2. Click the Contact [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 40 of 82 Figure 80. Delete Rows dialog 4. Click Yes to delete the event timer definition or No to close the dialog box without deleting the definition. Creating Alarm Monitor/ Contact Tables Alarm Monitor/Contact Tables allow you to associ ate alarm contacts with cameras or Salvos, Presets,[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 41 of 82 When any member of the set is activated, all members of the set are acti vated. Each member of a wired set must be designated as “Wired Set” or “Wired Gro up Ack,” except the last member of the set, whi ch must be designed as “No,” “No Grou p Ack,” “Salvo,” or ?[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 42 of 82 – Dome – Enter a Camera Number (pseudo number) of a dome configured for input alarming (1-9999). – Dome Input – Enter a value in the range of 1-4. This entry is the dome input alarm contact number. – Video Loss Camera (range) – This colum n is read-only and displays any[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 43 of 82 Figure 88. Definitions – Cameras screen The Definitions – Cameras screen can be split into an upper and lower scre en. • The upper screen show s existing camera definitions and allows you to add new definitions. All of the fields can be edited except the Dome/PTZ Connection a[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 44 of 82 Note: By default, pseudo numbers in this dialog box match the physical camera numbers. In all other screens and dialogs, referenc es to camer a numbers ar e actually references to the defined pseudo numbers. • Title 1 – You can create a two-line title for each camera that will [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 45 of 82 Deleting Calling Contacts To delete calling contacts: 1. Click on a camera in the upper scre en. 2. Click the header of the row in the lower scree n that contains the calling contact to be deleted. 3. Press the keyboard Delete key of the PC running EASY CPU. The Delete Rows dialog [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 46 of 82 Defining Keyboards The Definitions – Keyboards screen allows you to identify keyboards and the ports that con nect them. Click on the Definitions – Keyboards link in the Explore menu to begin. The Keyboards screen appears. Figure 94. Definitions – Keyboards screen The Definit[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 47 of 82 Figure 97. Definitions – keyboards monitor access screen To begin associating monitors with keyb oards from the Definitions – Keyboards screen: 1. Click on a keyboard. 2. Click the Monitor Access tab. The selected keyboard number a ppears just below the tab in the keyboard fiel[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 48 of 82 2. Click the Site Access tab. The selected keyboard number appears just belo w the tab in the keyboard field. 3. Click Add on the right side of the screen. The Add Sites dialog box appears. Figure 102. Add Sites dialog The Add Sites dialog provides three options. To select an optio[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 49 of 82 Figure 104. Definitions – key board/user priorities users setup screen 3. In the Users tab, complete the following fields: − User No. – Numeric reference a ssigned by the administrator that identifies individual users. − Priority – Identifies the priority level (1-8) assi[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 50 of 82 Defining Satellite Sites The Satellite Sites setup allows you to identify satellite sites and their port connections on the MegaPower CPU. 1. Click on the Definitions – Satellite Sites link to begin. The following screen appears. Figure 107. Satellite sites screen 2. To define sa[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 51 of 82 The screen is split into two sections: • The upper screen displays existing camera definitions and has an Add button in the upper right corner to add new camera d efinitions. It also has a reset button that allows you to reset camera pseudo numbers to the system default. The ran [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 52 of 82 • Title 1 – Allows you to create a two-line title for each camera that will display on the monitor when the camera i s called. Title 1 is the upper line of the title and can be up to eight characters or digit s in length with the pseudo number appended to the title. Titles over[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 53 of 82 The Calling Contacts tab contains the following fields: Figure 113. Cameras Calling Conta cts tab screen • Contact No. – Number of the alarm co ntact associated with the came ra • Preset or Pattern – Preset or Patte rn number associated with the came ra • Link – Choose [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 54 of 82 Adding Keyboard Definitions To add new keyboard definitions: 1. Click Add on the right side of the Partitions – Keyboards to Cameras upper scree n. The Add Keyboard dialog box appears. Figure 116. Add Keyboard dialog 2. To add keyboards, complet e the following fields: • System[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 55 of 82 Figure 118. Adding a range of cameras Removing Monitors or Satellite Sites Access from Keyboards 1. Click on a keyboard (any cell in the keyboard row) in the upper screen. 2. Do one of the following: • Click on the monitor access row to be removed in the Monitor Access tab in the[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 56 of 82 Editing Keyboard Definitions Once a keyboard is defined, you can edit the definition by highlighting the desired field and typing in new information. Deleting Keyboard Definitions 1. Click the header of the row in the upper scree n that contains the keyboard definition to be delete[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 57 of 82 Figure 124. Add Monitors to Monitor Access dialog 3. Enter the numbers of the monitors or range of monitors you want to associate with a specific keyboard. For example, Figure 125 displays a ran ge of monitors for Keyboard 1. The range of monitors are 1, 5, 8 through10, and 55 thro[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 58 of 82 Figure 127. Add Keyboard dialog 2. To add keyboards, complet e the following fields: • System Port Number – Enter the port number of the keyboard’s connection to the MegaPower CPU. The MegaPower CPU can support up to 128 keyboards usi ng port expansion modules. Port expansion[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 59 of 82 Adding Satellite Sites to Keyboards 1. Click Add on the right side of the Site Acce ss screen. The Add Sites dialog box appea rs. Figure 130. Add Sites dialog The Add Sites dialog box provides three options. To select an option: 2. Click the button beside it and com plete the requi[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 60 of 82 Adding Monitor Definitions 1. Click Add on the right side of the upper screen. The Add Monitors dialog box appears. Figure 132. Add Monitors dialog 2. To partition monitors to cameras, complete the following fields: • Number of Monitors – Specify the monitor by number. • Typ [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 61 of 82 c. Click the box next to “Group these monitors together.” d. Click OK to display the new monitor arming configuration or Cancel to close the dial og box without displaying the monitor arming configuration. Remember t o save and transfer your changes before closing EASY CPU. Aft[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 62 of 82 2. Click OK to save your contact choices or Cancel to close the dialog box without saving your choices. Deleting Contacts To delete contacts assigned to a monitor defined in the Contact Arming tab, do the following: 1. In the upper screen, click o n the monitor that contains the co[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 63 of 82 Declarations Regulatory Compliance EMC........................................................... 47 CFR, Part 15 EN 50130-4 EN 55022 EN 61000-3-2 EN 61000-3-3 Safety ............................... UL/IE C/EN/CSA C22.2.60950-1 Environmental .............................. RoHS 2002[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 64 of 82 APPENDIX A: End User License Agreement IMPORTANT – READ CAREFULLY: THIS END-USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU ("LICENSEE"), AND SENSORMATIC ELECTRONICS CORPORATION ("TYCO") FOR THE TYCO SOFTWARE ACCOMPANYING THIS EULA, [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 65 of 82 immediately destroy all copies of the SOFTWARE PRODUCT and all of its component parts. e. Subsequent EULA. Tyco may also s upersede this EULA with a subsequent EULA pursua nt to providing you with any future component, release, upgrade, or other modification or addition to the S OF[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 66 of 82 APPENDIX B: MegaPower CPU System Default s • IP Address – 192.168.0.1 • Subnet Mas k – 255.255.0.0 • Default Gateway – 0.0.0.0 • Host Name – UltraMP • Port Conf iguration s – Ports 1 – 32 – Type – Keyboard – Baud Rate – 1200 bps – Parity – None –[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 67 of 82 APPENDIX C: MegaPower CPU Front Panel LCD Menu S tructure This appendix illustrates th e hierarchy of screens that can be accessed o n the MegaPower CPU liquid-crystal display (LCD).[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 68 of 82 APPENDIX D: Port Number Assignment s The MegaPower CPU IP port sou rce and destina tion port numbers must be prog rammed; otherwise, communication with external devices will not occur. Purpose Protocol MPCPU Port PC Port Description Activity Logging (1) TCP (3) 514 Any Used as a se[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 69 of 82 APPENDIX E: Auxiliary Key Code Functions The following special function key s enable you, using the keyboard, to manually operate and control came ras. F1 Special Function Keys Function Action F1 Releases keyboard control of video trunk 1-F1 Unlocks the current camera 2-F1 Locks th[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 70 of 82 Function Action 55-F2 Entering this key combination implies that you will also enter another 2-di git F2 code combination within three seco nds: 99-F2 - System Reset or 98-F2 – Reset to Factory Defaults 60-F2 Displays current day of week 61-F2 Sets day of week to Sunday 62-F2 Set[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 71 of 82 APPENDIX F: Configuring V ideo Loss Detection The following procedure d escribes how to configure the MegaPower CPU for video lo ss detection using EASY CPU. Caution: As you progress throug h this configuration, ensure that the video loss contact assignments do not conflict with or[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 72 of 82 − Block – incoming alarms are di splayed on a block (group) of monitors with which they are associated. The first incoming ala rm is displayed on the first (lowest numbere d) monitor of the block. The second alarm is displayed on the next lowest numbe red monitor of the block, [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 73 of 82 APPENDIX G: Alarm Programming Overview An alarm is a signal generated by an external device connected to the MegaPower CPU syste m, either directly or through an alarm interface unit. External alarm signals can be generated in differe nt ways, such as opening a locke d door or wind[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 74 of 82 APPENDIX H: Monitor Arming Methods The monitor arming code i dentifies the alarm display, queuing, and clearance m ethods for the monitors. Note: Refer to APPENDIX I: Monitor Arming Codes for a detailed explanation of each monito r arming code. Alarm Display Method The alarm displa[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 75 of 82 • Manual Clear – This method relies on an operator clearing it via a keyboard or after the alarm contact number is ca lled to the monitor. All alarms remain queued on t heir respective monitors until the alarm is manually clea red. • Instant No Ack – This method in stantly [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 76 of 82 APPENDIX I: Monitor Arming Codes Monitor Arming Codes identify the alarm display, queuing, and clearan ce methods for armed monito rs, as well as the arm type (an abbreviated code that displays on the monitor wh en an alarm occurs). The following arming cod es are available. Single[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 77 of 82 Block Display, Hold Queuing • BHI – Multiple monitor alarm block, all alarms are queued and displayed on monitors with no existing alarms. Monitors displ ay and hold the first alarmed contacts. Alarms are removed from the queue when the alarm closure is restored (Instant). • [...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 78 of 82 APPENDIX J: Alarm Arming Notes Associating Alarms with Camera Salvos Each alarm contact can be associated with a camera Salvo for call-up when the alarm is received. To call a Salvo, the alarm contact number should be associated with a monitor block that contains enough monitors to[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 79 of 82 APPENDIX K: Satellite Co nfiguration Overview A satellite system is a network of two or more MegaPower 3200 video-matrix CCTV systems linked by video and data communications. You can link up to 30 individual MegaPower 3200 video-matrix CCTV systems into a satellite network. Satelli[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 80 of 82 Satellite Site Connections Record all local site RS-232 and video trunk satellite (remot e) syste m connections in the tables below. A set of tables should be filled out for each site i n a satellite network to identify all connections to and from other sites. Local Site Number: __[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 81 of 82 Typical Satellite System Connections – Two Sites, Unidirectional T E S T / E X P A N S I O N OUT IN OUT IN DAT A LINE EXT . SYNC 50/60 Hz T E S T / E X P A N S I O N OUT IN OUT IN DA T A LINE EXT . SYNC 50/60 Hz Site 1 (Source Site) Site 1 Keyboard Site 1 MegaPower CPU To other s[...]

MEGAPOWER CPU 8200-0421-03, REV. G ADMINISTRATOR’S GUIDE 82 of 82 Typical Satellite System Connections – Two Sites, Bidirectional T E S T / E X P A N S I O N OUT IN OUT IN DAT A LINE EXT . SYNC 50/60 Hz T E S T / E X P A N S I O N OUT IN OUT IN DA T A LINE EXT . SYNC 50/60 Hz Site 1 (Source and Receiving) Site 1 Keyboard Site 1 MegaPower CPU To[...]

[...]

© 2009 Tyco International Ltd. and its Respective Companies Product specification s su bj ect to change without notice. Certain product names mentioned herei n may be trade names and/or registered tradema rks of Tyco or other companies. 8200-0421-03 G Please visit our website for more information www.americandynamics.net[...]