AOC 916SWA Bedienungsanleitung

q 916Swa User Manual 1. Preface About This Guide This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change w ithout notice. The sections are as follows: • Safety Instructions : lists safety information. • Setup : describes the initial setup process. • Using the Monitor : gives an[...]

Please link www.aoc.com , select your country or region, log in Product Registration to register . 2. Safety Introduction FCC Notice FCC Class B Radio Frequency Interference Statement WA RNING : (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digit al device, purs uant to Part 15 of [...]

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE .ORG . Precautions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to sho[...]

Adjusting Viewing Angle • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor's angle. • You are able to adjust the monitor's angle from -5°to 20° .[...]

NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Attaching the Cables Cable Connections On Back of Monitor and Computer 1.Power 2.Analog 3. audio[...]

Turn off your computer before performing the procedure below. 1. Connect the power cable to the AC port on the back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the oth er end to the computer's D-Sub port. 3. Turn on your monitor and computer. If your monitor displays an image, installatio[...]

1. Auto Config 2. Volume / - 3. Volume / + 4. Menu / Enter 5. Power Button & Indicator OSD Settings • Press the MENU-button to activate the OSD window. • Press+ or - to navigate through the function s. Once the desired function is highlighted, press the MENU-buttonto activate it.If th e function selected has a sub-menu, press or again to na[...]

DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: “Color Boost” and “Picture Boost” . DDC: Dynamic color control ICM: Intelligent color manage[...]

Five color-enhancement settings: To accommodate various display needs, Color Boost also offers 5 different color enhancement modes: Full Enhance, Natural Skin, Green Field, Sky Blue, and Auto-Detect. Please go to the fourth icon labeled “Color Boost” in the OSD menu and select one of the five settings yo u desire to be turned on.[...]

Full Enhance: When "Full Enhance" is turned on, the color saturation of the entire screen is fully enriched, thus all colors become more vibrant . Nature Skin: When "Natural Skin" is turned on, the red and y ellow colors are enriched automatically, thus presents human skin with more natural and truer colors. "Natural Skin&q[...]

Sky Blue: When"Sky Blue" is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth. "Sky Blue" setting is ideal for viewing sky and ocean images. Auto Detect: When “Auto Detect” is turned on, every pigment will be detec ted and self-adj uste d to render a lively pic[...]

Demo: Screen divided into two for demonstration purposes. 2) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and positi on of th e selected zone can also be adjusted. "Pi cture Boost" is located in the fifth icon labeled "Picture Boost" in the OSD menu. Turn on "[...]

What is DCR? Dynamic Contrast Ratio (DCR) auto adjusts the brightness of the screen so users can see the darker areas of the display ed content in more depths. By increasing the darkness of the dark areas and the brightness of the bright areas, contrast ratio is upli fted to exceed 2000 :1. DCR value varie s subject to the original CR values of the[...]

DCR Demos: Disclaimer: DCR aftereffects are subject to the resolution and quali ty of the disp lay content, hence may look different than the above illu strations. Function Control Illustration Luminance Adjust Range Description Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Standard Standard Mode Text Text Mod[...]

User-G Green Gain Digital-register. User-R Red Gain from Digital-register User-Y Yellow Gain from Digital-register User-C Cyan Gain from Digital-register User-M Magenta Gain from Digital-register Color Boost Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disa[...]

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Foll ow these steps: 1. Remove the base. 2. Follow the manufacturer's instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in th[...]

4. Insert the 4 screws into the holes and tighten. 5. Reconnect the cables. Refer to the user's manual that came wit h the op tional wall mounting arm for instructions on attaching it to the wall. 5. Drivers Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Con[...]

11. Click on the 'Open' button, then click the 'OK' button. 12. Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed W indows® Logo testing to verify its compatibility with Windows® XP' message, please cli ck o n the 'Continue Any way' button. 13. Click on[...]

Missing one of the primary colors (RED, GREEN, or BLUE) • Inspect the monitor's video cable and make sure that none of the pins arebent. • Make sure the monitor's video cable is properly connected to the computer. Screen image is not centered or sized properly • Adjust H-Position and V-Position or press hot-key (AUTO). Picture has c[...]

Temperature: Operating 0° to 50° Non-Operating -20° to 60° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 80% (non-condensing) Altitude: Operating 0~ 3000m (0~ 10000 ft ) Environmental Non-Operating 0~ 5000m (0~ 15000 ft ) EPA Energy STA R ® ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC Inte rna[...]

XGA 1024 X 768 60.023kHz 75.0Hz SXGA 1280 X 1024 64.0kHz 60.0Hz SXGA 1280 X 1024 74.4kHz 70.0Hz SXGA 1280 X 1024 77.9kHz 72.0Hz SXGA 1280 X 1024 80.0kHz 75.0Hz W XGA 1440 X 900 55.5kHz 60.0Hz W XGA 1440 X 900 70.6kHz 75.0Hz Pin Assignments Pin Number 15-Pi n Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND[...]

Warranty Statement LIMITED THREE-YEA R W A RR ANTY* AOC Color Monitors sold wi thin Europe AOC Internat ional (Europe) G mbH warrants t his product t o be free from def ects in material and workm anship f or a period of T hree (3) years aft er the original date of consumer purchas e. During t his period, AOC Int ernational (Europe) GmbH will, at it[...]

ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PROD UCT (INCLUDI NG THE W ARRANTIES OF MERCHANTABI LITY AND FITNESS FOR A PARTICULAR PUR POSE) ARE L IMITED IN DURATION TO A PERIOD OF TH REE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. N O WARRANTI ES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER T HIS PERIOD. AOC INT ERNATIO[...]