Asko D4 Bedienungsanleitung

I DISHW ASHER D4 OPERATING INSTRUCTIONS • ENGLISH E Start Stop[...]

2 TROUBLEFREE HOUSEKEEPING ASKO/ONE quality is equally high worldwide, but the guarantees vary from country to coun- try depending on legislation and other factors. Guarantees and terms of sale are presented on a separate page that accompanies your machine. TROUBLEFREE HOUSEKEEPING A household appliance should always offer T rou- blefree performanc[...]

3 CONTENTS READ FIRST Safety 4 Children ’ s safety 5 The parts of the dishwasher 6 T echnical data 6 Baskets 7 Control panel, symbols 8 Dispenser 8 HOW TO USE THE DISHW ASHER Before you start 9 Basic instructions 9-12 Standard programmes 14-15 Programme options 1 6 Eco wash 1 7 Delicate and sensitive washing up 1 8 INDEX CARE Cleaning 20-21 Rinse[...]

4 PULL-LA TCH (FULL Y INTEGRA TED MACHINES ONL Y) The machine will stop if the door is opened during operation. Howev er, since the machine is fitted with a pull-latch, splashing may occur if the door is opened too quick l y . Ther efore, unlatch the door carefully and wait until the spray arms have stopped rotating before ope- ning fully . OVERFIL[...]

5 CHILD-SAFE STOPPING AND ST AR TING T o stop a dishwashing programme, the stop button must be pressed for three seconds . This delay is integrated. T o prevent the machine from being started by mistake by a child, it is possible to program- me a similar delay in the starting mode, see Set- tings. MACHINE WITH CHILD-SAFETY LOCK? T o activ ate the c[...]

6 1. KNIFE BASKET 2. UPPER BASKET 3. LAMP 4. SPRA Y ARMS 5. LOWER BASKET 6. CUTLERY BASKET 7. RINSE AID FILLING 8. RINSE AID DISPENSER 9. DETERGENT COMP A RTMENT 10. MAIN POWER SWITCH 11. PROGRAMME P ANEL 12. COARSE FILTER 13. FINE FILTER 14. TYPE PLA TE * Deviations may occur depending on the model and the market con- cerned. THE P AR TS OF THE DI[...]

7 1. ADJUST ABLE RACK FOR LONG-STEMMED GLASSES 2. ADJUST ABLE AND FOLDING RACKS 3. DET ACHABLE PLA TE RACK 4. CUTLERY BASKET WITH ADJUST ABLE AND FOLDING COVER 5. KNIFE RACK * Deviations may occur depending on the mo- del and the market concerned. DISHWARE BASKETS* 1 2 Upper basket Lower basket 3 Cutlery basket 4 Knife rack 5[...]

8 CONTROL P ANEL 1. INDICA TION LAMPS 2. INTENSIVE W ASH 3. STRONG W ASH 4. NORMAL W ASH 5. LIGHT W ASH 6. QUICK W ASH 7. RINSE & HOLD 8. PLA TE HEA TING 9. DELA YED ST ART DISPENSER 1. COMP AR TMENT FOR MAIN-W ASH DETERGENT 2. COMP ARTMENT FOR PRE-W ASH DETERGENT 3. RINSE-AID INDICA TOR 4. RINSE-AID LID 5. DETERGENT COMP ARTMENT LID 1 3 4 5 2 [...]

9 BASIC INSTRUCTIONS BEFORE USING THE DISHWASHER FOR THE FIRST TIME READ THE OPERA TING INSTRUCTIONS Read through the operating instructions before attempting to use the dishw asher, particularly the sections: Safety , Children ’ s safety , and Basic instructions. BE CAUTIOUS WITH CERT AIN MA TERIALS Read the Delicate wash section before washing [...]

10 basket. The detachable plate rack that is supp- lied with some models can easily be lifted out to provide space for big plates, saucepans and pots, or be fitted in one of the three different posi- tions. Place cutlery with the handles downwards and spread out as much as possible. Make cer- tain that spoons do not “nest“ with each other . A v[...]

11 SELECT A PROGRAMME The easiest way is to choose a standard dishwashing programme. Just press one of the seven programme symbols, and the machine does the rest. Or you can select the washing tempe- rature, number of rinses, heated drying, etc, your- self. See Options. If you used one of the standard programmes for the previous wash, ie, Intensive[...]

12 Rinse and hold For rinsing, with the intention of waiting until the machine is full before washing. Plate heating Use this programme to heat plates. PRESS THE ST ART BUTTON AND THE MAIN POWER SWITCH The machine will star t, and automatically car- r y out the entire washing prog ramme . The mach- ine will not start if the door is not fully closed[...]

13 THE DISPLA Y WINDOW The display window has four functions. It can show the temperature, the fault indication, the remaining programme time and the re-programming SHOWS HOW MUCH PROGRAMME TIME REMAINS. When a programme starts, the display shows the length of time it took when it was last run. As the prog ramme proceeds , the display counts do wn,[...]

14 ST ANDARD PROGRAMMES PRESS Programme Options HOW THE MACHINE WORKS T emperature Pre-wash with SCS* (number) Main wash (number) Rinsing (number) Drying heat Fan CONSUMPTION FIGURES W ashing time (ca. min)** Energy (ca. kWh) W ashing time (ca. min)** Energy (ca. kWh) W ater (litre)*** 70° 65° 65° 55° 22 22 11 11 43 22 Y e sY e s Y e sY e s Y e[...]

15 55° 55° 45° 12 1 11 1 22 2 No No No Ye s Ye s N o 70 85 29 4 8 0.4 0.3 0.2 0.01 0.2 85 105 41 4 8 1.0 1.0 0.6 0.01 0.2 14.0 17.5 14.0 3.5 _ LIGHT W ASH ECONOMY W ASH 55° RINSING PLA TE HEA TING * SCS = Super Cleaning System™. * * W ashing time can v ar y de pending on temperature of the water, variations in pow er, etc . * * * W ater consu[...]

16 OPTIONS DELA YED ST AR T If you want the machine to start after a delay (e.g. in a cheap-rate electricity period), press this pushbuttonthe same number of times as you want hours´ delay (1–12 hours). Then press the Start pushb utton. The number of hours´ delay you ha ve set, is displa yed in the window . Pressing the the pushbutton a thirtee[...]

17 ECO WASH CHOOSE ECONOMY W ASH Press the E-button to reduce temperature of the main wash to 50°C. Duration of the main washing phase will be extended by 15 minutes to compensate the lower temperature. Deter- gents that contain enzymes are more efficient at lower temperature and in longer washing pro- grammes. W ASH ONL Y WHEN FULL Save energy by[...]

18 For a variety of reasons, some articles are unsu- itable for machine washing. Some materials can- not withstand high temperature, others can be damaged by dishwasher detergents. SENSITIVE DECORA TION China that has “on-glaze“ decoration (feels a little rough) should not be machine washed. GLASSW ARE/CRYST AL P osition the items so that they [...]

19[...]

20 CLEANING CLEANING The inside of the machine is made of stainless steel, which is kept clean by normal use. Howe- v er, deposits of lime can be for med inside the machine if the water is hard. If this happens, run a Normal wash programme with two table- spoonful of citric acid in the detergent compart- ment. Coarse filter The coarse filter catche[...]

21 Spray arms Spray-arm jets and bearings may sometimes become clogged. Screw off the nut and take off the washer on top of the spray arm and lift off the ar m. P oke out any obstr uctions with a ske- w er or other suitable pointed tool. T he spray- arm jets face downwards. Door T o clean the edge r ound the door , use onl y a damp rag and possibly[...]

22 TOPPING UP WITH RINSE AID Dr ying will be faster if y ou use rinse aid. T he rinse-aid indicating lamp on the panel will light when the rinse-aid container becomes empty .* There is also an indicator on the dispenser. See the figure . T here is sufficient rinse aid av ailable if the indicator is completely black. If the size of the black dot is [...]

23 SAL T FILLING WITH SAL T The salt compartment must be filled with salt before using a machine that is equipped with a water softener . Use coarse salt or regener ating salt that is especially intended for dishwashers. The salt should preferably be filled just be- fore running the dishwasher because it is neces- sary to rinse the machine directly[...]

24 SETTINGS REPROGRAMMING Some of the machine functions can be reprogrammed. Access to reprogramming of the machine is g ained via the ordinar y control buttons as e xplained belo w . Any alteration made will remain intact until the next time you alter the functions. Ev en if the machine is tur ned off using the main po wer switch, or if power is c[...]

25 ADD ADDITIONAL RINSING Proceed as follows to give an extra rinse in the Intensive, Strong and Normal wash: Display Lamps 1 . PRESS STRONG W ASH FIVE TIMES* (WITHIN 15 SECONDS) 2 . PRESS QUICK W ASH ONCE TO OBT AIN AN EXTRA RINSE 1 OR RESET : 2 . PRESS LIGHT W ASH ONCE AND YOU WILL GET NORMAL FUNCTION - * The la test selected setting will be sho [...]

26 SETTING THE PUMPING-OUT TIME The pumping-out time can suitably be extended if you are using a long drain hose, max. 3 metres, or if the machine for any other reason has difficulty in pumping out the waste water in time. Proceed as follows: Display Lamps 1 . PRESS NORMAL W ASH* (WITHIN 15 SECONDS) 2 . PRESS NORMAL W ASH ONCE FOR 20 SECONDS PUMPIN[...]

27 F AUL T INDICA TIONS INDICA TOR LAMPS IINDICA TION DISPLA Y TYPE OF FAULT ACTION DOOR IS OPEN PREVENTING ST A RT OF CLOSE THE DOOR THE SELECTED PROGRAMME ELEMENT MALFUNCTION CONSUL T SER VICE TOO MUCH W A TER IN THE MACHINE SEE SETTING OF W A TER / DRAINPUMP A SENSOR ERROR HAS OCCURRED CONSUL T SERVICE W A TERINLET MALFUNCTION CHECK W A TER SUPP[...]

28 TROUBLE SHOOTING - DISHW ASHING RESUL TS F AUL T - POOR W ASHING PERFORMANCE Possible causes 1. Rotation of spray arms prevented by protruding object. Check also that jets in the spray arms are not clogged. 2. Spray arms slowed down by impurities in the bearings. Spin the arms by hand and if they do not spin freely lift them off and wipe the fit[...]

29 • V er y hard water . Compensate with acidic rinse aid. Still not clean after testing with citric acid? • The cause is pr obably temperature that is too high and/or too much deter g ent. This type of film, or etching, cannot be remedied, only pre vented. W ash glasses at lo w temperature and dispense the amount detergent with care, and avoid[...]

30 TROUBLE SHOOTING - DISHWASHER If the machine does not work, check first to find out if the reason is a simple fault that you can remedy yourself . T r y to locate the fault with the aid of the follo wing description. T r y the trouble-shooting prog ramme also , see F ault indications . F AUL T - DISHW ASHER WILL NOT ST ART Possible causes 1. Mai[...]

31 PERFORMANCE INFORMA TION EXAMPLE OF HOW TO LOAD THE MACHINE TECHNICAL DA T A Height: 820–890 mm Width: 596 mm W eight: 4 8 k g * 51kg with water softener* Capacity: 14 AS covers W ater pressure: 0.03–1.0 MP a 0.3–10 kp/cm 2 (Bar) 3-100 N/cm 2 Connection: See data plate Max. power: See data plate * The weight may var y depending on dif fere[...]

PRESS Programme Options HOW THE MACHINE WORKS T emperature Drying heat 70° 65° 65° 55° 55° 55° 55° 45° - 55° Y es Y es Y es Y es N o Y es N o N o N o Y es QUICK GUIDE 1. FILL THE BASKETS Remove large particles of food and waste. It is not necessary to rinse, thanks to the Super Cleaning System ™ . 2. DOSE THE DETERGENT The detergent comp[...]