Asrock X79 Extreme6 Bedienungsanleitung

1 X79 Extreme6/GB X79 Extreme6 User Manual V ersion 1.0 Published December 201 1 Copyright©201 1 ASRock INC. All rights reserved.[...]

2 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trade[...]

3 Contents 1 Introduction ......................................................... 5 1.1 Package Contents ......................................................... 5 1.2 Speci fi cations ................................................................. 6 1.3 Motherboard Layout (X79 Extreme6/GB / X79 Extreme6) .....................................[...]

4 2.23.1 Installing Windows ® XP / XP 64-bit Without RAID Functions............................................................ 67 2.23.2 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit Without RAID Functions ............... 68 2.24 T eaming Function Operation Guide (X79 Extreme6/GB) ................................................[...]

5 Chapter 1: Introduction Thank you for purchasing ASRock X79 Extreme6/GB / X79 Extreme6 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality con- trol. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contains i[...]

6 1.2 Specifications Platform - A TX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm - Premium Gold Capacitor design (100% Japan-made high- quality Conductive Polymer Capacitors) CPU - Supports Intel ® Core TM i7 processor family for the LGA 201 1 Socket - Digi Power Design - 12 + 2 Power Phase Design - Supports Intel ® T urbo Boost 2.0 T echnol[...]

7 Audio - 7.1 CH HD Audio with Content Protection (X79 Extreme6) (Realtek ALC898 Audio Codec) - Premium Blu-ray audio support - Supports THX T ruStudio TM LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Broadcom BCM57781 - Supports W ake-On-LAN - Supports Energy Ef fi cient Ethernet 802.3az - Supports Dual LAN with T eaming function with the bundled [...]

8 - 1 x IEEE 1394 header - 1 x Power LED header - CPU/Chassis/Power/SB F AN connector - 24 pin A TX power connector - 8 pin 12V power connector - SLI/XFire power connector - 3 x USB 2.0 headers (support 6 USB 2.0 ports) - 1 x USB 3.0 header (supports 2 USB 3.0 ports) - 1 x Dr . Debug with LED Smart Switch - 1 x Clear CMOS Switch with LED - 1 x Powe[...]

9 CAUT ION! 1. About the setting of “Hyper Threading T echnology”, please check page 82. 2. This motherboard supports Quad Channel Memory T echnology . Before you implement Quad Channel Memory T echnology , make sure to read the installation guide of memory modules on page 22 for proper installa- tion. 3. Due to Intel ® CPU spec definition, pl[...]

10 7. ASRock Extreme T uning Utility (AXTU) is an all-in-one tool to ne-tune dif- ferent system functions in a user-friendly interface, which includes Hard- ware Monitor , Fan Control, Overclocking, OC DNA and IES. In Hardware Monitor , it shows the major readings of your system. In Fan Control, it shows the fan speed and temperature for you to adj[...]

11 12. ASRock XFast LAN provides a faster internet access, which includes the bene fi ts listed below . LAN Application Prioritization: Y ou can con fi gure your application’s priority ideally and/or add new programs. Lower La- tency in Game: After setting online game’s priority higher , it can lower the latency in games. T raf fi c Shaping:[...]

12 1.3 Motherboard Layout (X79 Extreme6/GB / X79 Extreme6) 1 Power Fan Connector (PWR_F AN1) 26 Reset Switch (RSTBTN1) 2 240-pin DDR3 DIMM Slot (DDR3_A1, Black) 27 Power Switch (PWRBTN1) 3 240-pin DDR3 DIMM Slot (DDR3_A2, Black) 28 Chassis Speaker Header (SPEAKER1, Black) 4 240-pin DDR3 DIMM Slot (DDR3_B1, Black) 29 System Panel Header (P ANEL1, Bl[...]

13 1.4 I/O P anel (X79 Extreme6/GB / X79 Extreme6) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description Off No Link Of f 10Mbps connection Blinking Data Activity Orange 100Mbps connection On Link Green 1G[...]

14 T o enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header . After restarting your computer , you will fi nd “Mixer” tool on your system. Please select “Mixer T oolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “[...]

15 1.5 ASRock Game Blaster (X79 Extreme6/GB) ASRock Game Blaster is packed with the new earthshattering Creative Sound Core3D quad-core sound and voice processor . It is designed to deliver sound and voice with unbeatable quality and accurate 3D positional audio. It also boosts gam- ing performance, enables dual LAN with teaming function, and allow[...]

16 * There are two LEDs next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description Off No Link Of f 10Mbps connection Blinking Data Activity Green 100Mbps connection On Link Green 1Gbps connection ** Front Panel Audio Header (9-pi[...]

17 Specifications Platform - Size: 4.3-in x 3.0-in, 1 1.0 cm x 7.5 cm - Premium Gold Capacitor design (100% Japan-made high- quality Conductive Polymer Capacitors) Chipset - Creative Sound Core3D quad-core sound and voice processor - Powerful 32-bit 200Mhz QUAD-Processor SIMD DSP - 102dB 24-bit DAC - 101dB 24-bit ADC Output Features - Supports Ster[...]

18 Chapter 2: Installation This is an A TX form factor (12.0" x 9.6", 30.5 x 24.4 cm) motherboard. Before you install the motherboard, study the con fi guration of your chassis to ensure that the motherboard fi ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physic[...]

19 2.3 CPU Installation For the installation of Intel 201 1-Pin CPU, please follow the steps below . Before you insert the 201 1-Pin CPU into the socket, please check if the CPU surface is unclean or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be serio[...]

20 Step 2-2. Locate Pin1 and the two orientation key notches. alignment key alignment key Pin1 201 1-Pin CPU 201 1-Pin Socket For proper inserting, please ensure to match the four orientation key notches of the CPU with the four alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical mo- tion. Step[...]

21 2.4 Installation of CPU F an and Heatsink This motherboard is equipped with 201 1-Pin socket that supports Intel 201 1-Pin CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 201 1- Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink t[...]

22 2.5 Installation of Memor y Modules (DIMM) This motherboard provides eight 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Quad Channel Memory T echnology . For quad channel con- fi guration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM in the slots, so that Quad Channel Memory T ech- nol[...]

23 notch break notch break Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fi ts in one correct ori[...]

24 2.6 Expansion Slots (PCI Express Slots) There are 2 PCI slots and 4 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 / PCIE3 (PCIE 3.0 x16 slots) are used for PCI Express x16 lane width graphics cards, or used to install PCI Express graphics card[...]

25 2.7 ASRock Game Blaster Installation Guide (X79 Extreme6/GB) 2.7.1 ASRock Game Blaster and Driver Installation Step 1. Please refer to the “Expansion Slots” section then insert ASRock Game Blaster into PCIE4 slot. Step 2. In order to avoid mechanical con fl ict, please fasten your VGA cards and ASRock Game Blaster to the chassis with screws[...]

26 Step 3. Follow the step by step driver setup directions. Please make sure to use Windows ® Vista TM 32-bit / 64-bit or Windows ® 7 32-bit / 64-bit . ASRock Game Blaster is not supported under Windows ® XP / XP 64-bit. Step 4. Restart your computer for ASRock Game Blaster to take ef fect.[...]

27 Step 1. Unscrew the four screws which hold the chassis and ASRock Game Blaster together . Some VGA cards violate the PCI-E spec and may result in mechanical con fl ict with ASRock Game Blaster. In this case, we suggest you to follow the steps below to uninstall the chassis of the ASRock Game Blaster to fi x the con fl ict. Step 2. Remove the [...]

28 2.7.2 ASRock Game Blaster Configuration This section explains how to con fi gure your ASRock Game Blaster. 2.7.2.1 THX TRUSTUDIO PRO THX T ruStudio Pro Click the power button on the left to activate or deactivate. Surround Control the level of audio immersion in music, movies and games. Crystalizer Enhance music and movies to make them sound li[...]

29 2.7.2.2 CRYST AL VOICE Select a recording device Mic V olume Control the level of mic volume. Mic Boost Control the level of mic boost. CrystalV oice Click the power button on the left to activate or deactivate. FX Morph your voice into different characters and accents. Smart V olume Be heard clearly without having to shout or whisper . Noise Re[...]

30 2.7.2.3 SPEAKERS/HEADPHONES Speakers / Headphones Con fi guration Select the device connected. Optional Speakers: Center Enable or disable center speaker . Subwoofer Enable or disable subwoofer . Rear pair Enable or disable rear pair speakers. Full-Range Speakers: Select full-range speakers. Front left and right Surround speakers Bass Managemen[...]

31 2.7.2.4 MIXER Playback Speakers Control the level of speakers playback. SPDIF-Out Control the level of SPDIF-Out playback. Balance Control the level of various speaker ’s balance. REC Input Device Select input device. What U Hear Control the level of playback redirect.[...]

32 2.7.2.5 EQUALIZER EQ Choose from Flat, Acoustic, Classical, Country , Dance, Jazz, New Age, Pop, Rock and V ocal. 2.7.2.6 JACK SETUP[...]

33 Device Connected: Select the device connected. 5.1 Surround 7.1 EX Surround Stereo and Microphone Stereo and Line-In Show Jack Setup dialog when an audio jack is inserted Enable or disable Jack Setup dialog. Front panel headphones is shared with side speakers. Front Speakers Center/Subwoofer Rear Speakers Side Speakers Front Speakers Center/Subw[...]

34 2.7.2.7 ADV ANCED FEA TURES Play stereo mix to digital output Enable or disable play stereo mix to digital output.[...]

35 2.7.2.8 PROFILE User Pro fi les Y ou can save, load or delete your user pro fi les. The default is <Custom>.[...]

36 Note 1. If you want to hear your own voice through the microphone (Playback mode). Y ou can enable it by using ASRock Game Blaster's con fi guration Utility CR YST AL VOICE T est . OR you can change your settings to "playback mode" by checking the "Listen to this device" box in Control panel Sound Recording Microphone P[...]

37 2.8 SLI TM , 3- W ay SLI TM and Quad SLI TM Operation Guide This motherboard supports NVIDIA ® SLI TM , 3-W ay SLI TM and Quad SLI TM (Scalable Link Interface) technology that allows you to install up to three identical PCI Express x16 graphics cards. Currently , NVIDIA ® SLI TM technology supports Windows ® XP / XP 64-bit / V ista TM / Vista[...]

38 Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot. Step3. Align and insert the ASRock SLI_Bridge_2S Card to the gold fi ngers on each graphics card. Make sure the ASRock SLI_Bridge_2S Card is fi rmly in place. ASRock SLI_Bridge_2S Card[...]

39 2.8.1.2 Installing Three SLI TM -Ready Graphics Cards Step 1. Install the identical 3-W ay SLI TM -ready graphics cards that are NVIDIA ® certi fi ed because different types of graphics cards will not work together properly . (Even the GPU chips version shall be the same.) Each graph- ics card should have two gold fi ngers for ASRock 3-Way SL[...]

40 2.8.2 Driver Installation and Setup Install the graphics card drivers to your system. After that, you can enable the Multi- Graphics Processing Unit (GPU) feature in the NVIDIA ® nView system tray utility . Please follow the below procedures to enable the multi-GPU feature. For W indows ® XP / XP 64-bit OS: (For SLI TM mode only) A. Double-cli[...]

41 For Windows ® Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS: (For SLI TM and Quad SLI TM mode) A. Click the Start icon on your Windows taskbar . B. From the pop-up menu, select All Programs , and then click NVIDIA Corporation . C. Select NVIDIA Control Panel tab. D. Select Control Panel tab. E. From the pop-up menu, select Set SLI and PhysX con [...]

42 For Windows ® Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS: (For 3-W ay SLI TM mode) A. Follow steps A to D on page 41. B. From the pop-up menu, select Set SLI and PhysX con fi guration . In Select a hardware acceleration setting for PhysX item, please select Enabled . In Select an SLI con fi guration item, please select Enable 3-way SLI . An[...]

43 1. If a customer incorrectly con fi gures their system they will not see the performance bene fi ts of CrossFireX TM . All three CrossFireX TM components, a CrossFireX TM Ready graphics card, a CrossFireX TM Ready motherboard and a CrossFireX TM Edition co-processor graphics card, must be installed correctly to bene fi t from the CrossFireX T[...]

44 CrossFire Bridge Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE1 slot. (Y ou may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter .) Step 2. Connect two Radeon graphics cards by installing CrossFire Br[...]

45 2.9.1.2 Installing Three CrossFireX TM -Ready Graphics Cards Step 1. Install the identical 3-W ay CrossFireX TM -ready graphics cards that are AMD ® certified because different types of graphics cards will not work together properly . (Even the GPU chips version shall be the same.) Insert one graphics card into PCIE1 slot, another graphics card[...]

46 The Catalyst Uninstaller is an optional download. We recommend using this utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMD website for A TI TM driver updates. Step 3. Install the required drivers to your system. For W indows ® XP OS: A. AMD recommends Windows ® XP Service Pack 2 or higher t[...]

47 2.10 Surround Display F eature This motherboard supports Surround Display upgrade. With the external add-on PCI Express VGA cards, you can easily enjoy the bene fi ts of Surround Display feature. For detailed instructions, please refer to the document at the following path in the Support CD: .. Surround Display Information Although you have se[...]

48 * ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to ASRock website for the motherboard support list: http://www .asrock.com USB 2.0 header (9-pin, black) CIR header (4-pin, gray) 2.11 ASRock Smart Remote Installation Guide ASRock Smart Remote is only used for ASRock motherboard with CIR header . Please refer t[...]

49 2.12 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins. Jumper Setting Description Clear CMOS[...]

50 Serial A T A2 Connectors These four Serial A T A2 (SA T A2_0_1: see p.12, No. 22) (SA T A2) connectors support (SA T A2_2_3: see p.12, No. 21) SA T A data cables for internal storage devices. The current SA T A2 interface allows up to 3.0 Gb/s data transfer rate. Serial A T A3 Connectors These fi ve Serial A T A3 (SA T A3_0_1: see p.12, No. 20)[...]

51 USB 3.0 Header Besides four default USB 3.0 (19-pin USB3_4_5) ports on the I/O panel, there is (see p.12 No. 16) one USB 3.0 header on this motherboard. This USB 3.0 header can support two USB 3.0 ports. Infrared Module Header This header supports an (5-pin IR1) optional wireless transmitting (see p.12 No. 39) and receiving infrared module. Cons[...]

52 System Panel Header This header accommodates (9-pin P ANEL1) several system front panel (see p.12 No. 29) functions. Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables. PWRBTN (Power Switch): Con[...]

53 Power LED Header Please connect the chassis (3-pin PLED1) power LED to this header to (see p.12 No. 30) indicate system power status. The LED is on when the system is operating. The LED keeps blinking in S1 state. The LED is off in S3/S4 state or S5 state (power off). 1 PLED+ PLED+ PLED- Chassis, Power and SB Fan Connectors Please connect the fa[...]

54 A TX Power Connector Please connect an A TX power (24-pin A TXPWR1) supply to this connector . (see p.12 No. 14) 12 1 24 13 20-Pin A TX Power Supply Installation Though this motherboard provides 24-pin A TX power connector , it can still work if you adopt a traditional 20-pin A TX power supply . T o use the 20-pin A TX power supply , please plug[...]

55 HDMI_SPDIF Header HDMI_SPDIF header , providing (2-pin HDMI_SPDIF1) SPDIF audio output to HDMI (see p.12 No. 42) VGA card, allows the system to connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to this header . SPDIFOUT GND 1[...]

56 The Installation Guide of F ront USB 3.0 P anel Intall the Front USB 3.0 Panel into the 2.5” drive bay of the chassis. Step 3 Step 4 Screw the Front USB 3.0 Panel to the drive bay with six chassis screws. Prepare the bundled Front USB 3.0 Panel, four HDD screws, and six chassis screws. Step 1 Step 2 Screw the 2.5” HDD/SSD to the Front USB 3.[...]

57 2.14 Smart Switches The motherboard has three smart switches: power switch, reset switch and clear CMOS switch, allowing users to quickly turn on/off or reset the sytem clear the CMOS values. Power Switch Power Switch is a smart switch, (PWRBTN) allowing users to quickly turn (see p.12 No. 27) on/off the system. Reset Switch Reset Switch is a sm[...]

58 2.15 Dr . Debug Dr . Debug is used to provide code information, which makes troubleshooting even easier . Please see the diagrams below for reading the Dr . Debug codes. Status Code Description 0x00 Not used 0x01 Power on. Reset type detection (soft/hard) 0x02 AP initialization before microcode loading 0x03 North Bridge initialization before mic[...]

59 0x37 Post-Memory North Bridge initialization is started 0x38 Post-Memory North Bridge initialization (North Bridge module speci fi c) 0x39 Post-Memory North Bridge initialization (North Bridge module speci fi c) 0x3A Post-Memory North Bridge initialization (North Bridge module speci fi c) 0x3B Post-Memory South Bridge initialization is starte[...]

60 0x62 Installation of the South Bridge Runtime Services 0x63 CPU DXE initialization is started 0x64 CPU DXE initialization (CPU module speci fi c) 0x65 CPU DXE initialization (CPU module speci fi c) 0x66 CPU DXE initialization (CPU module speci fi c) 0x67 CPU DXE initialization (CPU module speci fi c) 0x68 PCI host bridge initialization 0x69 [...]

61 0xA6 SCSI Detect 0xA7 SCSI Enable 0xA8 Setup V erifying Password 0xA9 Start of Setup 0xAA Reserved for ASL (see ASL Status Codes section below) 0xAB Setup Input W ait 0xAC Reserved for ASL (see ASL Status Codes section below) 0xAD Ready T o Boot event 0xAE Legacy Boot event 0xAF Exit Boot Services event 0xB0 Runtime Set Virtual Address MAP Begin[...]

62 2.16 Serial A T A (SA T A) / Serial A T A2 (SA T A2) Hard Disks Installation This motherboard adopts Intel ® X79 chipset that supports Serial A T A (SA T A) / Serial A T A2 (SA T A2) hard disks and RAID (RAID 0, RAID 1, RAID 5, RAID 10 and Intel Rapid Storage 3.0) functions. Y ou may install SA T A / SA T A2 hard disks on this motherboard for i[...]

63 2.18 Hot Plug and Hot Swap F unctions for SA T A / SA T A2 HDDs This motherboard supports Hot Plug and Hot Swap functions for SA T A / SA T A2 in RAID / AHCI mode. Intel ® X79 chipset provides hardware support for Advanced Host controller Interface (AHCI), a new programming interface for SA T A host controllers developed through a joint industr[...]

64 Caution 1. Without SA T A 15-pin power connector interface, the SA T A / SA T A2 / SA T A3 Hot Plug cannot be processed. 2. Even some SA T A / SA T A2 / SA T A3 HDDs provide both SA T A 15-pin power connector and IDE 1x4-pin conventional power connector interfaces, the IDE 1x4-pin conventional power connector interface is de fi nitely not able [...]

65 How to Hot Plug a SA T A / SA T A2 / SA T A3 HDD: Points of attention, before you process the Hot Plug: Please do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SA T A / SA T A2 / SA T A3 HDD damage and data loss. Connect SA T A data cable to the motherboard’s SA T A2 / SA T A3 connector . Connect [...]

66 If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on Intel ® SA T A2 / SA T A3 ports with RAID functions, please follow below steps. STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Storage Con fi guration. B. Set the option “SA T A Mode” to [RAID] for Intel ® SA T A2 / SA T A3 ports. Set the o[...]

67 2.23 Installing Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit Without RAID Functions If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64- bit OS on your SA T A / SA T A2 / SA T A3 HDDs without RAID functions, please follow below procedures according to the OS you install. 2.23.1 Instal[...]

68 Using SA T A / SA T A2 / SA T A3 HDDs without NCQ function STEP 1: Set Up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Storage Con fi guration. B. Set the option “SA T A Mode” to [IDE]. (For SA T A2_0 to SA T A2_3, SA T A3_0 and SA T A3_1 ports.) Set the option “ASMedia SA T A3 Mode” to [IDE]. (For SA T A3_A0 to SA T A3_A2 ports.) [...]

69 2.24 T eaming F unction Operation Guide (X79 Extreme6/GB) Dual LAN with T eaming function enabled on this motherboard allows two single connections to act as one single connection for twice the transmission bandwidth, making data transmission more effective and improving the quality of transmission of distant images. Fault tolerance on the dual [...]

70 4. Click the Create T eam tab. * The Create T eam tab appears only if there are teamable adapters available. 5. Click the T eam Name fi eld to enter a team name. 6. Click the T eam T ype fi eld to select a team type. 7. Assign any available adapter or adapters to the team by selecting the adapter from the Load Balance Members list. There must [...]

71 9. T ype the value for T eam MTU . 10. Click Create to save the team information. 1 1. Repeat steps 5. through 10. to de fi ne additional teams. As teams are de fi ned, they can be selected from the team list, but they have not yet been created. Click the Preview tab to view the team structure before applying the changes. 12. Click Apply/Exit [...]

72 2.25 Untied Overclocking T echnology This motherboard supports Untied Overclocking T echnology , which means during overclocking, BCLK enjoys better margin due to fi xed PCIE buses. Before you enable Untied Overclocking function, please enter “Overclock Mode” option of UEFI setup to set the selection from [Auto] to [Manual]. Therefore, BCLK[...]

73 Chapter 3: UEFI SETUP UTILITY 3.1 Introduction This section explains how to use the UEFI SETUP UTILITY to con fi gure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY . Y ou may run the UEFI SETUP UTILITY when you start up the computer . Please press <F2> or <Del> during the Power-On-Self-T est (POST) to e[...]

74 3.1.2 Navigation K eys Please check the following table for the function description of each navigation key . Navigation Key(s) Function Description / Moves cursor left or right to select Screens / Moves cursor up or down to select items + / - T o change option for the selected items <Enter> T o bring up the selected screen <F1> T o [...]

75 X79 Extreme6 System Browser System Browser can let you easily check your current system con fi guration in UEFI setup.[...]

76 3.3 OC T weak er Screen In the OC T weaker screen, you can set up overclocking features. Load CPU EZ OC Setting Y ou can use this option to load CPU EZ overclocking settings. Please note that overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. CPU Control CPU Ratio Setting Use this item to c[...]

77 T urbo Boost Power Limit Use this item to adjust T urbo Boost power limit. Con fi guration options: [Auto] and [Manual]. The default value is [Auto]. Core Current Limit Maximum instantaneous current allowed at any given time. Additional T urbo V oltage Use this item to add voltage when CPU is in T urbo mode. Active Processor Cores Use this item[...]

78 DRAM tRCD Use this item to change RAS# to CAS# Delay (tRCD) Auto/Manual setting. The default is [Auto]. DRAM tRP Use this item to change Row Precharge T ime (tRP) Auto/Manual setting. The default is [Auto]. DRAM tRAS Use this item to change RAS# Active T ime (tRAS) Auto/Manual setting. The default is [Auto]. DRAM tRFC Use this item to change Ref[...]

79 ODT NOM (CH A) Use this item to change ODT NOM (CH A) Auto/20/30/40/60/120 setting. The default is [Auto]. ODT WR (CH B) Use this item to change ODT WR (CH B) Auto/60/120 setting. The default is [Auto]. ODT NOM (CH B) Use this item to change ODT NOM (CH B) Auto/20/30/40/60/120 setting. The default is [Auto]. ODT WR (CH C) Use this item to change[...]

80 V oltage Control V oltage Con fi guration VRM Protection Use this to enable or disable Vcore Power Over T emperature Protection. The default value is [Enabled]. CPU Core V oltage Use this to select CPU Core V oltage. The default value is [Auto]. CPU Load-Line Calibration CPU Load-Line Calibration helps prevent CPU voltage droop when the system [...]

81 Setting wrong values in this section may cause the system to malfunction. 3.4 Advanced Screen In this section, you may set the con fi gurations for the following items: CPU Con fi gu- ration, North Bridge Con fi guration, South Bridge Con fi guration, Storage Con fi gura- tion, Super IO Con fi guration, ACPI Con fi guration, USB Con fi g[...]

82 3.4.1 CPU Configuration CPU Ratio Setting Use this item to change the ratio value of this motherboard. Intel Hyper Threading T echnology T o enable this feature, it requires a computer system with an Intel processor that supports Hyper-Threading technology and an operating system that includes optimization for this technology , such as Microsoft[...]

83 CPU Power Management Con fi guration Intel SpeedStep T echnology Intel SpeedStep technology is Intel’s new power saving technology . Pro- cessor can switch between multiple frequency and voltage points to en- able power savings. The default value is [Enabled]. Con fi guration options: [Enabled] and [Disabled]. If you install Windows ® Vista[...]

84 3.4.2 North Bridge Configuration Primary Graphics Adapter This allows you to select the boot graphic adapter priority . The default value is [PCI Express]. PCIE 1 Link Speed This allows you to select PCIE 1 Link Speed. The default value is [GEN2]. PCIE 3 Link Speed This allows you to select PCIE 3 Link Speed. The default value is [GEN2]. PCIE 4 [...]

85 3.4.3 South Bridge Configuration Restore on AC/Power Loss This allows you to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains of f when the power recovers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers. Deep Sx Mobile platforms suppo[...]

86 Good Night LED Use this item to enable or disable Power LED and Lan LED. Onboard Debug Port LED Use this item to enable or disable Onboard Debug Port LED.[...]

87 3.4.4 Storage Configuration SA T A Mode This item is for SA T A3_0, SA T A3_1 and SA T A2_0 to SA T A2_3 ports. Use this to select SA T A mode. Con fi guration options: [IDE Mode], [AHCI Mode], [RAID Mode] and [Disabled]. The default value is [AHCI Mode]. Aggressive Link Power Management Use this item to con fi gure Aggressive Link Power Manag[...]

88 3.4.5 Super IO Configuration Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to set the address for the onboard serial port. Con fi guration options: [3F8h / IRQ4] and [3E8h / IRQ4]. Infrared Port Use this item to enable or disable the onboard infrared port.[...]

89 3.4.6 ACPI Configuration Suspend to RAM Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. PS/2 Keyboard Power On Use this item to enable or disable PS/2 keyboard to tur[...]

90 3.4.7 USB Configuration USB 2.0 Controller Use this item to enable or disable the use of USB 2.0 controller . USB 3.0 Controller Use this item to enable or disable the use of USB 3.0 controller . Legacy USB Support Use this option to select legacy support for USB devices. There are four con fi guration options: [Enabled], [Auto], [Disabled] and[...]

91 3.4.8 ME Subsystem Intel ME Subsystem Con fi guration ME V ersion[...]

92 3.5 Hardware Health Event Monitoring Screen In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU Fan 1 & 2 Setting This allows you to set the CPU fan 1 & 2 speed. Con ?[...]

93 3.6 Boot Screen In this section, it will display the available devices on your system for you to con fi g- ure the boot settings and the boot priority . Setup Prompt Timeout This shows the number of seconds to wait for setup activation key . 65535(0XFFFF) means inde fi nite waiting. Bootup Num-Lock If this item is set to [On], it will automati[...]

94 3.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it.[...]

95 3.8 Exit Screen Save Changes and Exit When you select this option, it will pop-out the following message, “Save con fi guration changes and exit setup?” Select [Y es] to save the changes and exit the UEFI SETUP UTILITY . Discard Changes and Exit When you select this option, it will pop-out the following message, “Discard changes and exit [...]

96 Chapter 4: Sof tware Support 4.1 Install Operating System This motherboard supports various Microsoft ® Windows ® operating systems: 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit. Because motherboard settings and hardware options vary , use the setup procedures in this chapter for general refer- ence only . Refer to your OS docume[...]

97 Installing OS on a HDD Larger Than 2TB in AHCI Mode This motherboard adopts UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP1 or above) or Windows ® 7 64-bit . 2. Press <F2> o[...]

98 Installing OS on a HDD Larger Than 2TB in RAID Mode This motherboard adopts UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP1 or above) or Windows ® 7 64-bit . 2. Copy Intel ® RAID[...]

99 If you install Windows ® 7 64-bit / Vista TM 64-bit in a large hard disk (ex. Disk volume > 2TB), it may take more time to boot into Windows ® or install driver/ utilities. If you encounter this problem, you will need to following instructions to fi x this problem. Windows ® Vista TM 64-bit: Microsoft ® does not provide hot fi x for thi[...]

100 B. Disable “V olume Shadow Copy” service. a. T ype “computer management” in the Start Menu, then press “Enter”. b. Go to “Services and Applications>Services”; Then double click “V olume Shadow Copy”.[...]

101 c. Set “Startup type” to “Disable” then Click “OK”. C. Reboot your system. D. After reboot, please start to install motherboard drivers and utilities. Windows ® 7 64-bit: A. Please request the hot fi x KB2505454 through this link: http://support.microsoft.com/kb/2505454/ B. After installing Windows ® 7 64-bit, install the hot fi[...]