Asus E3151 Bedienungsanleitung

Motherboard Blitz Formula[...]

ii E3151 First Edition V1 June 2007 Copyright © 2007 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purcha[...]

iii Contents Contents ...................................................................................................... iii Notices ........................................................................................................ vii Safety information .................................................................................... [...]

iv Contents 2.5.4 PCI slots ........................................................................ 2-26 2.5.5 PCI Express x1 slots ..................................................... 2-26 2.5.6 PCI Express x16 slots ................................................... 2-26 2.6 Jumper ..............................................................[...]

v Contents 4.3 Main menu .................................................................................. 4-12 4.3.1 System T ime ................................................................. 4-12 4.3.2 System Date ................................................................. 4-12 4.3.3 Legacy Diskette A ..................................[...]

vi Contents 5.2 Support DVD information ............................................................ 5-1 5.2.1 Running the support DVD ............................................... 5-1 5.2.2 Drivers menu ................................................................... 5-2 5.2.3 Utilities menu ...................................................[...]

vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has [...]

viii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect a[...]

ix About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware informatio[...]

x Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. <Key> Key s encl osed i n the less- than a nd gre ater-t han s ign mea ns tha t you [...]

xi Blitz Formula specications summary CPU LGA775 socket for Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® Extreme / Pentium ® D / Pentium ® 4 / Celeron ® D Processors Compatible with Intel ® 05B/05A/06 processors * Refer to www .asus.com for Intel CPU support list Chipset Intel ® P35 / ICH9R with Intel ® Fast Memory[...]

xii Blitz Formula specications summary ROG Exclusive Overclocking features Crosslink technology Extreme T weaker Loadline Calibration Intelligent overclocking tools: - AI NOS™ (Non-delay Overclocking System) - AI Overclocking (intelligent CPU frequency tuner) - AI Booster Utility - O.C. Prole Overclocking protection: - COP EX (Component Ove[...]

xiii Blitz Formula specications summary Accessories ASUS Optional Fan DIY Pedestal 3 in 1 ASUS Q-connector kit UltraDMA 133/100/66 cable Floppy disk drive cable Serial A T A cables Serial A T A power cables 2-port USB2.0 + IEEE 1394a module I/O Shield Cable ties User's manual Software The hottest 3D game: S.T .A.L.K.E.R. Blitz Formula Suppo[...]

xiv[...]

1 Product introduction This chapter describes the motherboard features and the new technologies it supports.[...]

ROG Blitz Formula Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features ............................................................................ 1-2[...]

ROG Blitz Formula 1-1 1.1 Welcome! Thank you for buying an ASUS ® Blitz Formula motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with[...]

1-2 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Republic of Gamers The Republic of Gamers consists only the best of the best. We of fer the best hardware engineering, the fastest performance, the most innovating ideas, and we welcome the best gamers to join in. In the Republic of Gamers, mercy rules are only for th[...]

ROG Blitz Formula 1-3 DDR2 memory support The motherboard supports DDR2 memory that features data transfer rates of 800/667 MHz to meet the higher bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The dual-channel DDR2 architecture doubles the bandwidth of your system memory to boost system performance, elimin[...]

1-4 Chapter 1: Product Introduction Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packaging to safeguard consumers’ health while minimizing the impact on the enviro[...]

ROG Blitz Formula 1-5 CPU Level Up Enjoy up to 40% more performance! Overclock immediately with OC prole presets. Much more than simple frequency settings, this prole gives gamers comprehensive and detailed tuning to frequencies, voltagies, and even timings to create a real professional level of overclocking conguration. 8 phase DrMOS powe[...]

1-6 Chapter 1: Product Introduction C.P .R. (CPU Parameter Recall) The C.P .R. feature of the motherboard BIOS allows automatic re-setting to the BIOS default settings in case the system hangs due to overclocking. When the system hangs due to overclocking, C.P .R. eliminates the need to open the system chassis and clear the RTC data. Simply shut do[...]

ROG Blitz Formula 1-7 Optional Fan (for water-cooling/passive-cooling only) The optional fan is specically designed to provide sufcient airow over the CPU power modules and chipset area when water-cooling or passive-cooling is utilized, ensuring effective heat dissipation for the entire system. See pages 2-16 and 2-17 for details. ASUS MyL[...]

1-8 Chapter 1: Product Introduction Fanless Design–Heat-pipe The ASUS fanless design allows multi-directional heat ow from major thermal sources in the motherboard to lower overall system temperature, resulting in quieter operation and longer system life. ASUS has devoted special efforts to address the thermal issues across the motherboard, an[...]

2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.[...]

ROG Blitz Formula Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-5 2.3 Central Processing Unit (CPU) ................................................... 2-9 2.4 System memory ..............[...]

ROG Blitz Formula 2-1 2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply [...]

2-2 Chapter 2: Hardware information 2. Memory LED Refer to the illustration below for the location of the memory LED and the table below for LED denition. BLITZ FORMULA ® BLITZ FORMULA DDR LED DDR_CRAZY DDR_HIGH DDR_NORMAL BLITZ FORMULA ® BLITZ FORMULA North/South Bridge LED NB_CRAZY NB_HIGH NB_NORMAL SB_CRAZY SB_HIGH SB_NORMAL 3. Northbridge/[...]

ROG Blitz Formula 2-3 CPU FSB 200MHz 200-299 (Default) 300-399 (Overclocking) 400-499 (Overclocking) 500-599 (Overclocking) 600~ (Overclocking) 1 (Default) 2 3 4 5 (Fast) CPU FSB 266MHz 266-299 (Default) 300-399 (Overclocking) 400-499 (Overclocking) 500-599 (Overclocking) 600~ (Overclocking) 1 (Default) 2 3 4 5 (Fast) CPU FSB 333MHz 333-399 (Defaul[...]

2-4 Chapter 2: Hardware information BLITZ FORMULA ® BLITZ FORMULA Hard Disk LED HD_LED 5. Hard Disk LED The hard disk LED is designed to indicate the hard disk activity . It blinks when data is being written into or read from the hard disk drive. The LED does not light up when there is no hard disk drive connected to the motherboard or when the ha[...]

ROG Blitz Formula 2-5 BLITZ FORMULA ® 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.[...]

2-6 Chapter 2: Hardware information 2.2.3 Motherboard layout PANEL BLITZ FORMULA ® CHASSIS 24.5cm (9.6in) 30.5cm (12.0in) CPU_FAN DDR2 DIMM_A1 (64 bit,240-pin module) OPT_FAN1 FLOPPY Super I/O CLRTC_SW Intel ® ICH9R EA TXPWR CR2032 3V Lithium Cell CMOS Power Intel ® P35 USB11 12 KB_USB56 LAN2_USB34 JMB368 CHA_FAN1 Marvell 88E8001 SPDIF_OUT LGA77[...]

ROG Blitz Formula 2-7 2.2.5 Layout contents Slots Page 1. DDR2 DIMM slots 2-18 2. PCI slots 2-26 3. PCI Express x 1 slots 2-26 4. PCI Express x 16 slots 2-24 Jumper Page 1. Clear RTC RAM (3-pin CLRTC_SW) 2-27 Rear panel connectors Page 1. PS/2 keyboard port (purple) 2-30 2. Coaxial S/PDIF Out port 2-30 3. LAN 2 (RJ-45) port 2-30 4. LAN 1 (RJ-45) po[...]

2-8 Chapter 2: Hardware information Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2- 32 2. IDE connector (40-1 pin PRI_EIDE) 2- 32 3. ICH9R Serial A T A connectors (7-pin SA T A1~6) 2- 33 4. USB connectors (10-1 pin USB78, USB910, USB1 1 12) 2- 34 5. IEEE 1394a port connector (10-1 pin IE1394_2) 2- 35 6. Thermal sensor c[...]

ROG Blitz Formula 2-9 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® D / Pentium ® 4 / Pentium ® Extreme / Celeron ® D processors. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and[...]

2-10 Chapter 2: Hardware information 3. Lift the load lever in the direction of the arrow to a 135º angle. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab Load lever This side of the socket box should face you. PnP cap A B T o prevent damage to the socket pins, do[...]

ROG Blitz Formula 2-1 1 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then t the socket alignment key into the CPU notch. Alignment key Gold triangle mark 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab. 7. If installing a dual-co[...]

2-12 Chapter 2: Hardware information Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. T o install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that [...]

ASUS Blitz Formula 2-13 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. B A A A B B DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector .[...]

2-14 Chapter 2: Hardware information 2.3.3 Uninstalling the CPU heatsink and fan 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembl y from the motherboard. B B A A A A B B 4. Carefully remove the heatsink and fan assembly from the motherboard. T o uninstall the CPU heatsink and fan: 1. Disconnect the[...]

ASUS Blitz Formula 2-15 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation. The narrow end of the groove should point outward after resetting. (The photo shows the groove sh[...]

2-16 Chapter 2: Hardware information 2.3.4 Installing the optional fans Install the optional fan only if you are using a passive cooler or a water cooler . Installing the optional fan with an active CPU cooler will interfere with the airow and destabilize the system. 1. Position the fan above the pipe and heatsink assembly . 2. Fit the fan to th[...]

ASUS Blitz Formula 2-17 1. Assemble the optional fan kit by tting the grooved edge of the optional fan to the plastic fan seat and snapping it into place. 2. The photo below demostrates the the optional fan ready for use. 3. Slide the optional fan onto the heatsink, then connect the fan cable. 4. The photo shows the fans installed on the motherb[...]

2-18 Chapter 2: Hardware information Channel Sockets Channel A DIMM_A1 and DIMM_A2 Channel B DIMM_B1 and DIMM_B2 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. The gure illustrates the location of the DDR2 DIMM sockets: BLITZ FORMULA ® BLITZ FORMULA 240-pin D[...]

ASUS Blitz Formula 2-19 2.4.2 Memory congurations Y ou may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets. Recommended Memory Congurations • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel congurati[...]

2-20 Chapter 2: Hardware information Blitz Formula Motherboard Qualied V endors Lists (QVL) DDR2-1000 MHz capability If you install a DDR2-1066 memory module, make sure that you set the DRAM Frequency item in BIOS to [DDR2-1066MHz]. See section 4.4 Extreme T weaker menu for details. • A*: Supports one module inserted in any slot as Single-chan[...]

ASUS Blitz Formula 2-21 Blitz Formula Motherboard Qualied V endors Lists (QVL) DDR2-800 MHz capability Size Vendor Chip No. SS/ DS Part No. DIMM support A* B* C* 512MB KINGSTON K4T51083QC SS KVR800D2N5/512 • • • 1024MB KINGSTON Heat-Sink Package DS KHX6400D2LL/1G • • • 1024MB KINGSTON Heat-Sink Package SS KHX6400D2LLK2/1GN • • ?[...]

2-22 Chapter 2: Hardware information Blitz Formula Motherboard Qualied V endors Lists (QVL) DDR2-667MHz capability Size Vendor Chip No. SS/ DS Part No. DIMM support A* B* C* 512MB KINGSTON D6408TEBGGL3U SS KVR667D2N5/512 • • • 1024MB KINGSTON D6408TEBGGL3U DS KVR667D2N5/1G • • 256MB KINGSTON HYB18T256800AF3S SS KVR667D2N5/256 • • ?[...]

ASUS Blitz Formula 2-23 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1. Unlo ck a DIM M so cket by pres sing the retaining clips outward. 2. Align a DIMM on the socket such that the [...]

2-24 Chapter 2: Hardware information 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it [...]

ASUS Blitz Formula 2-25 2.5.3 Interrupt assignments IRQ assignments for this motherboard A B C D E F G H PCI slot 1 shared ––––––– PCI slot 2 – shared –––––– LAN (8001) shared ––––––– SA T A (363) shared ––––––– LAN (8006) – shared –––––– PCIE x16_1 shared ––––––– P[...]

2-26 Chapter 2: Hardware information 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications. Refer to the gure below for the location of the slots. 2.5.5 PCI Express x1 slots This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that c[...]

ASUS Blitz Formula 2-27 2.6 Jumper 1. Clear RTC RAM (3-pin CLRTC_SW) This jumper allows you to enable the clr CMOS switch. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The clr CMOS switch on the back I/O helps you easily to clear the system setup information such as system passwords. T [...]

2-28 Chapter 2: Hardware information 2.7 Audio card, I/O shield, and LCD Poster installation 2.7.1 Audio card Installation 1. T ake out the Audio card from the package. 2. Locate the audio slot on the motherboard. 3. Align the card connector with the slot and press rmly until the card sits on the slot completely . 4. The photo below shows the au[...]

ROG B litz Formula 2-29 2. Position the motherboard I/O side toward the chassis rear panel and install the motherboard to the chassis. 3. Thread the LCD Poster cable through the opening until its stopper snaps into place. 4. Plug the LCD Poster cable into the onboard connector labeled LCD_CON. 5. This photo shows the LCD Poster installed. Place the[...]

2-30 Chapter 2: Hardware information 2.8 Connectors 2.8.1 Rear panel connectors 1. PS/2 keyboard port (purple). This port is for a PS/2 keyboard. 2. Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable. 3. LAN 2 (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through [...]

ROG B litz Formula 2-31 5. Line In port (light blue). This port connects the tape, CD, DVD player , or other audio sources. 6. Line Out port (lime). This port connects a headphone or a speaker . In 4-channel, 6-channel, and 8-channel conguration, the function of this port becomes Front Speaker Out. 7. Microphone port (pink). This port connects a[...]

2-32 Chapter 2: Hardware information 2.8.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive. Pin 5 on the connector is [...]

ROG B litz Formula 2-33 3. ICH9R Serial A T A connectors (7-pin SA T A1~6) These connectors are for the Serial A T A signal cables for Serial A T A hard disk drives. If you installed Serial A T A hard disk drives, you can create a RAID 0, RAID 1, RAID 5, RAID 10 conguration with the Intel ® Matrix Storage T echnology through the onboard Intel ?[...]

2-34 Chapter 2: Hardware information Connect the right-angle side of SA T A signal cable to SA T A device. Or you may connect the right-angle side of SA T A cable to the onboard SA T A port to avoid mechanical conict with huge graphics cards. right angle side Y ou must install the Windows ® XP Service Pack 1 before using Serial A T A hard disk [...]

ROG B litz Formula 2-35 5. IEE E 1394 a port connector (10-1 pin IE1394_2) This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector , then install the module to a slot opening at the back of the system chassis. BLITZ FORMULA ® BLITZ FORMULA IEEE 1394a connector IE1394_2 PIN 1 GND +12V TPB1- GND TP A1- +12V TPB[...]

2-36 Chapter 2: Hardware information 7. CPU, chassis, and optional fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN1~4, 3-pin PWR_F AN, 3-pin OPT_F AN1~2) The fan c onnect ors su pport cooli ng fan s of 3 50 mA~1000 mA (24 W max.) or a total of 1 A~3.48 A (41.76 W max.) at +12V . Connect the fan cables to the fan connectors on the motherboard, making[...]

ROG Blitz Formula 2-37 9. AT X p owe r c on ne cto rs (24-pin EA TXPWR, 8-pin EA TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. 8. Chassis intrusion connector (4-1 pi[...]

2-38 Chapter 2: Hardware information BLITZ FORMULA ® BLITZ FORMULA Digital audio connector +5V SPDIFOUT GND SPDIF_OUT 10. Digital audio con nec tor (4-1 pin SPDIF_OUT for ASUS HDMI VGA card) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). If you are using an ASUS HDMI-equipped graphics card, connect the HDMI ca[...]

ROG Blitz Formula 2-39 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is fo[...]

2-40 Chapter 2: Hardware information ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector . 1. Connect the front panel cables to the ASUS Q-Connector . Refer to the labels on the Q-Connector to know the deta[...]

ROG Blitz Formula 2-41 2.8.3 Onboard switches Onboard switches allow you to ne-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. Power-on switch Press the power-on switch to wake/power up the system. BLITZ FORMULA ® BLITZ FORMU[...]

2-42 Chapter 2: Hardware information 2.8.4 Installing the DIY Pedestal 1. T ake out the DIY Pedestal from the motherboard package. 2. Arrange and stick the rubber studs to wherever you wish to place your motherboard. 3. Put the motherboard on the DIY Pedestal to get more efcient heat dissipation. • The tape on the rubber studs is for one-time [...]

3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system.[...]

ROG Blitz Formula Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-1 3.2 T urning off the computer ............................................................. 3-2[...]

ROG Blitz Formula 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector . 5. T urn on the[...]

3-2 Chapter 3: Powering up 3.2 Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows ® XP: 1. Click the Start button then select T urn Off Computer . 2. Click the T urn Off button to shut down the computer . 3. The power supply should turn off after Windows ® shuts down. If you are using Windows ® Vista™: 1. C[...]

4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.[...]

Chapter summary 4 ROG Blitz Formula 4.1 Managing and updating your BIOS ............................................ 4-1 4.2 BIOS setup program .................................................................... 4-9 4.3 Main menu .................................................................................. 4-12 4.4 Extreme T weaker menu .....[...]

ROG Blitz Formula 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk or USB ash disk.) 3. ASUS AFUDOS (Updates the BIOS using a [...]

4-2 Chapter 4: BIOS setup Quit all Windows ® applications before you update the BIOS using this utility . 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® deskt[...]

ROG Blitz Formula 4-3 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears. 2. Select Update BIOS from a le option from the drop-down menu, then [...]

4-4 Chapter 4: BIOS setup 4.1.2 Creating a bootable oppy disk 1. Do either one of the following to create a bootable oppy disk. DOS environment a. Insert a 1.44MB oppy disk into the drive. b. At the DOS prompt, type format A: / S then press <Enter>. Windows ® XP environment a. Insert a 1.44 MB oppy disk to the oppy disk drive.[...]

ROG Blitz Formula 4-5 T o update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www .asus.com) to download the latest BIOS le for the motherboard. 2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the system. 4.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to[...]

4-6 Chapter 4: BIOS setup 4.1.4 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process. Copying the curr[...]

ROG Blitz Formula 4-7 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support DVD to the bootable oppy disk you created earlier . 3. Boot the system in DOS mode, then at the prompt type: afudos /i[lename] where [lename] is the latest or the original BIOS le on the bootable oppy disk. A:>afudos /iBlitz Formula.ROM Wri[...]

4-8 Chapter 4: BIOS setup 4.1.5 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can update a corrupted BIOS le using the motherboard support DVD, the oppy disk, or the USB ash disk that contains the u[...]

ROG Blitz Formula 4-9 4.2 BIOS setup program This motherboard supports a programmable Serial Peripheral Interface (SPI) chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Ru[...]

4-10 Chapter 4: BIOS setup 4.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguration Extreme T weaker For changing the overclocking settings Advanced For changing the advanced system settings Power For changing the advanced power management (APM) conguration Boot For changing[...]

ROG Blitz Formula 4-1 1 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items. 4.2.5 Sub-menu items A solid triangle before each item on any menu scree[...]

4-12 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. 4.3.3 Legacy Diskette A [1.44M, 3.5 in.] Sets the [...]

ROG Blitz Formula 4-13 4.3.5 S A T A 1 - 6 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information. The BIOS automatically detects the values opposite the dimmed items (Device[...]

4-14 Chapter 4: BIOS setup DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology . Conguration options: [Auto] [Disabled] [Enabled] 32Bit Data [...]

ROG Blitz Formula 4-15 If yo u w ant t he Ser ial AT A h ard di sk d riv es to u se the Ad va nc ed Hos t C on tro lle r In ter fac e ( AH CI) , s et thi s i tem to [ AH CI] . Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be ef fective only if device is accessed through BIOS. Conuration option: [Disabl[...]

4-16 Chapter 4: BIOS setup 4.3.8 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication. System Memory Displays the auto-detected system memory . Sele[...]

ROG Blitz Formula 4-17 4.4 Extreme Tweaker menu The Extreme T weaker menu items allow you to congure overclocking-related items. T ake caution when changing the settings of the Extreme T weaker menu items. Incorrect eld values can cause the system to malfunction. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 S[...]

4-18 Chapter 4: BIOS setup PCIE Frequency [100] Allows you to set the PCI Express frequency . Conguration options: [100] [101]~[149] [150] DRAM Frequency [Auto] Allows you to set the DDR2 operating frequency . Conguration options: [Auto] [DDR2-667MHz] [DDR2-800 MHz] [DDR-1066MHz] A very high DRAM frequency may cause the system to become unsta[...]

ROG Blitz Formula 4-19 The following items appear when you set the DRAM Timing Control item to [Manual]. CAS# Latency [ 5] Conguration options: [3] [4] [5] [6] RAS# to CAS# Delay [ 5 DRAM Clocks] Conguration options: [3 DRAM Clocks] [4 DRAM Clocks]~[9 DRAM Clocks] [10 DRAM Clocks] RAS# Precharge [ 5 DRAM Clocks] Conguration options: [3 DRA[...]

4-20 Chapter 4: BIOS setup CPU V oltage [Auto] Allows you to select the CPU voltage. The text color in the conguration eld corresponds to the onboard CPU LED color , both of which indicate CPU voltage condition. Refer to page 2-1 for CPU LED denition. Conguration options: [Auto] [1.10000V] [1.10625V] [1.1 1250V] [1.1 1875V] [1.12500V] [[...]

ROG Blitz Formula 4-21 DRAM V oltage [Auto] Allows you to select the DRAM reference voltage. The text color in the conguration eld corresponds to the onboard memory LED color , both of which indicate DRAM voltage condition. Refer to page 2-2 for memory LED denition. Conguration options: [Auto] [1.80V] [1.82V] [1.84V] [1.86V] [1.88V] [1.[...]

4-22 Chapter 4: BIOS setup NB LED Selection [NB V olt] Allows you to switch the onboard northbridge LED display between northbridge voltage [NB V olt] and front side bus termination voltage [FSBT V olt]. Conguration options: [NB V olt] [FSBT V olt] SB LED Selection [PLL V olt] Allows you to switch the onboard southbridge LED display between PLL [...]

ROG Blitz Formula 4-23 4.5.2 USB Conguration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None. USB Functions [Enabled] Allows you to ena[...]

4-24 Chapter 4: BIOS setup The USB 2.0 Controller Mode item appears only when you enable the USB 2.0 Controller . BIOS EHCI Hand-off [Enabled] Allows you to enable the support for operating systems without an EHCI hand-off feature. Conguration options: [Disabled] [Enabled] Port 64/60 Emulation [Disabled] Allows you to enable or disable the I/O p[...]

ROG Blitz Formula 4-25 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. 4.5.3 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. CPU Ratio Control [Auto] Conguration options: [Auto] [Manual] T[...]

4-26 Chapter 4: BIOS setup 4.5.4 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Advanced Chipset Settings WARMING: Setting wrong values in below sections may cause system to malfunction. North Bridge Conguration Con gure North B ridge features. PECI[...]

ROG Blitz Formula 4-27 4.5.5 OnBoard Devices Conguration High Denition Audio [Enabled] Allows you to enable or disable the High Denition Audio. The following item appears only when you enable this item. Conguration options: [Enabled] [Disabled] Front Panel Support T ype [HD Audio] Allows you to set the front panel audio connector (AAFP)[...]

4-28 Chapter 4: BIOS setup 4.5.6 PCI PnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. T ake caution when changing the settings of the PCI PnP menu items. Incorrect eld values can cause the system to malfunction. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C[...]

ROG Blitz Formula 4-29 4.6 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. 4.6.1 Suspend Mode [Auto] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used for system suspend.[...]

4-30 Chapter 4: BIOS setup 4.6.5 APM Conguration Restore On AC Power Loss [Power Off] When set to Power Off, the system goes into of f state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC powe[...]

ROG Blitz Formula 4-31 4.6.6 Hardware Monitor CPU T emperature; MB T emperature; NB T emperature; SB T emperature; OPT T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU, motherboard, northbridge, southbridge, and the assigned device temperatures. Select [Ignored] if you do not wish to display the d[...]

4-32 Chapter 4: BIOS setup South Bridge Overheat Protection [Auto] Allows yous to enable/disable the southbridge overheat auto-protection function or set the temperature over which the system shuts down. Conguration options: [Auto] [70C] [80C] [Disabled] OPT_TEMP2 Overheat Protection [Disabled] If you monitor a device temperature using a thermal[...]

ROG Blitz Formula 4-33 Chassis Q-Fan Control [Disabled] Allows you to enable or disable the chassis Q-Fan controller . Conguration options: [Disabled] [Enabled] The following two items appear when you enable the Chassis Q-Fan Control feature. Chassis Fan Ratio [Auto] Conguration options: [Auto] [90%] [80%] [70%] [60%] Chassis T arget T empera[...]

4-34 Chapter 4: BIOS setup Duty Cycle Mode [90%] Allows you to set the fan duty cycle. When the OPT_Fan1/2 Q-Fan Control item is set to [Q-F AN], this item does not appear . Conguraiton options: [70%] [80%] [90%] [100%] T argetT emp V alue [32] Allows you to set the temperature at which the optional fan starts up. When the OPT_Fan1/2 Q-Fan Contr[...]

ROG Blitz Formula 4-35 4.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. Boot Device Priority Boot Settings[...]

4-36 Chapter 4: BIOS setup 4.7.2 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Conguration options: [Disabled] [Enabled] Full Screen Logo [Enabled] [...]

ROG Blitz Formula 4-37 Change Supervisor Password Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. T o set a Supervisor Password: 1. Select the Change Supervisor Password item and press <Enter>. 2. [...]

4-38 Chapter 4: BIOS setup User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] [No Access] prevents user access to the Setup utility . [View Only] allows access but does not allow change to any eld. [Limited] allows chang[...]

ROG Blitz Formula 4-39 Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility . When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Conguration options: [Setup] [Always] 4.8 Tools menu The T ools menu items allow you to congure options for sp[...]

4-40 Chapter 4: BIOS setup Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. O.C. PROFILE Conguration O.C. Prole 1 Status :Not Installed O.C. Prole 2 Status :Not Installed Save to Prole 1 Load from Prole 1 Save to Prole 2 Load from P[...]

ROG Blitz Formula 4-41 4.9 Exit menu Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit. The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Select Screen Select [...]

4-42 Chapter 4: BIOS setup[...]

5 Software support This chapter describes the contents of the support DVD that comes with the motherboard package.[...]

ROG Blitz Formula Chapter summary 5 5.1 Installing an operating system ................................................... 5-1 5.2 Support DVD information ............................................................ 5-1 5.3 Software information ................................................................... 5-9 5.4 RAID congurations ........[...]

ROG Blitz Formula 5-1 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the DVD. 5.1 Installing an operating system This motherboard supports Windows ® XP/64-bit XP/Vista/64-bit V ista operating systems (OS). Always install[...]

5-2 Chapter 5: Software support 5.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstAll driver installation wizard. Intel Chipset Inf Update Program Installs the Inte[...]

ROG Blitz Formula 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. Click to display the next screen Click to display the previous screen ASUS InstAll-Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard. Marvell Y ukon VCT Application Inst[...]

5-4 Chapter 5: Software support ASUS AI Suite Installs the ASUS AI Suite. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows ® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP). Adobe Acrobat Reader V7.0 Installs the Adobe ® Acrobat ® Rea[...]

ROG Blitz Formula 5-5 5.2.4 Make Disk menu The Make Disk menu contains items to create the Intel ICH8 or JMicron ® JMB36X RAID/AHCI driver disk. Intel ICH9R 32/64bit AHCI/RAID Driver Allows you to create an ICH9R 32/64bit AHCI/RAID driver disk.[...]

5-6 Chapter 5: Software support 5.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. Y ou can also nd this information on the inside front cover of this user guide. 5.2.5 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most [...]

ROG Blitz Formula 5-7 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specied information. Motherboard Info Displays the general specications of the motherboard. Browse this DVD Displays the support DVD cont[...]

5-8 Chapter 5: Software support Filelist Displays the contents of the support DVD and a brief description of each in text format. T echnical support form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.[...]

ROG Blitz Formula 5-9 5.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information. 5.3.1 ASUS MyLogo3 ™ The ASUS MyLogo3 ™ utility lets you customize the boot logo. Th[...]

5-10 Chapter 5: Software support 9. When the screen returns to the ASUS Update utility , ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST . 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 7. When the logo images appear[...]

ROG Blitz Formula 5-1 1 3. Click the Run button to perform a cable test. 5.3.2 AI NET 2 The AI NET 2 features the Marvell ® V irtual Cable T ester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the T ime Domain Reectometry (TDR) technology . The VCT detects and reports open and shorted cables, impedan[...]

5-12 Chapter 5: Software support 5.3.3 SoundMAX ® High Denition Audio utility The ADI AD1988B High Denition Audio CODEC provides 8-channel audio capability through the SoundMAX ® audio utility with AudioESP ™ software to deliver the ultimate audio experience on your PC. The software implements high quality audio synthesis/rendering, 3D so[...]

ROG Blitz Formula 5-13 From the taskbar , double-click on the SoundMAX ® icon to display the SoundMAX ® Control Panel. Audio Setup Wizard By clicking the icon from the SoundMAX ® control panel, you can easily congure your audio settings. Simply follow succeeding screen instructions and begin enjoying High Denition Audio.[...]

5-14 Chapter 5: Software support Jack conguration This screen helps you congure your computer’s audio ports, depending on the audio devices you have installed. Adjust speaker volume This screen helps you adjust speaker volume. Click the T est button to hear the changes you have made. Adjust microphone volume This screen helps you adjust mic[...]

ROG Blitz Formula 5-15 Audio preferences Click the icon to go to the Preferences page. This page allows you to change various audio settings. General options Click the General tab to choose your playback and recording devices, enable/ disable the AudioESP ™ feature, and enable/disable digital output. Listening Environment options Click the Listen[...]

5-16 Chapter 5: Software support Microphone options Click the Microphone tab to optimize your microphone input settings.[...]

ROG Blitz Formula 5-17 5.3.4 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others. Because PC Probe II is software-based, you can start monitoring your computer t[...]

5-18 Chapter 5: Software support Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windows Management Instrumentation window Opens the hard disk drive, memory , CPU usage window Shows/Hides the Preference section Minimize[...]

ROG Blitz Formula 5-19 Changing the monitor panels position T o change the position of the monitor panels in the desktop, click the arrow down button of the Scheme options, then select another position from the list box. Click OK when nished. Moving the monitor panels All monitor panels move together using a magnetic effect. If you want to detac[...]

5-20 Chapter 5: Software support Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below . Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser . This browser displays various Windows® managemen[...]

ROG Blitz Formula 5-21 PCI browser Click to display the PCI (Peripheral Component Interconnect) browser . This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard dis[...]

5-22 Chapter 5: Software support Memory usage The Memory tab shows both used and available physical memory . The pie chart at the bottom of the window represents the used (blue) and the available Conguring PC Probe II Click to view and adjust the sensor threshold values. The Cong window has two tabs: Sensor/Threshold and Preference. The Senso[...]

ROG Blitz Formula 5-23 5.3.5 ASUS AI Suite ASUS AI Suite allows you to launch AI Gear , AI N.O.S., AI Booster , AI Nap, and Q-Fan utilities easily . Installing AI Suite T o install AI Suite on your computer: 1. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer has an enabled Autorun feature. 2. Click [...]

5-24 Chapter 5: Software support Other feature buttons Click on right corner of the main window to open the monitor window . Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit. Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/[...]

ROG Blitz Formula 5-25 5.3.6 ASUS AI N.O.S. This ASUS Non-delay Overclocking System feature intelligently determines the system load and automatically boosts the performance for the most demanding tasks. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows OS taskbar [...]

5-26 Chapter 5: Software support 5.3.7 ASUS AI Gear 2 ASUS AI Gear 2 provides four system performance options that allows you to select the best performance setting for your computing needs. This easy-to-use utility adjusts the processor frequency and vCore voltage to minimize system noise and power consumption. After installing AI Suite from the b[...]

ROG Blitz Formula 5-27 5.3.8 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away . Enable this feature for minimum power consumption and a more quiet system operation. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on th[...]

5-28 Chapter 5: Software support 5.3.9 ASUS AI Booster The ASUS AI Booster application allows you to overclock the CPU speed in WIndows ® environment without the hassle of booting the BIOS. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows ® OS taskbar and click [...]

ROG Blitz Formula 5-29 5.3.10 ASUS Q-Fan 2 This ASUS Q-Fan 2 Control feature allows you to set the appropriate performance level of the CPU Q-Fan 2 or the Chassis Q-Fan 2 for more efcient system operation. After enabling the Q-Fan 2 function, the fans can be set to automatically adjust depending on the temperature, to decrease fan speed, or to a[...]

5-30 Chapter 5: Software support 5.4 RAID congurations The motherboard comes with the Intel ® ICH9R Southbridge RAID controller that allows you to congure IDE and Serial A T A hard disk drives as RAID sets. 5.4.1 RAID denitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved [...]

ROG Blitz Formula 5-31 5.4.3 Intel ® RAID congurations This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 (0+1) and Intel ® Matrix Storage congurations for Serial A T A hard disks drives through the Intel ® ICH8R Southbridge chip. Setting the RAID item in BIOS Y ou must set the RAID item in the BIOS Setup before you can create a RAI[...]

5-32 Chapter 5: Software support Intel ® Matrix Storage Manager Option ROM Utility The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial A T A hard disk drives that are connected to the Serial A T A connectors supported by the Southbridge. T o enter the Intel ?[...]

ROG Blitz Formula 5-33 Creating a RAID 0 set (striped) T o create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 0 set, then press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 0(Stripe), t[...]

5-34 Chapter 5: Software support 6. Use the up/down arrow key to select the stripe size for the RAID 0 array , then press <Enter>. The available stripe size values range from 4 KB to 128 KB. The default stripe size is 128 KB. TIP: We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems use[...]

ROG Blitz Formula 5-35 Creating a RAID 1 set (mirrored) T o create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. 2. Enter a name for the RAID 1 set, then press <Enter>. 3. When the RAID Level item is highlighted, press the up/down arrow key to select RAID 1(Mirror), [...]

5-36 Chapter 5: Software support Creating a RAID 10 set (RAID 0+1) T o create a RAID 10 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH9R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU[...]

ROG Blitz Formula 5-37 Creating a RAID 5 set (parity) T o create a RAID 5 set: 1. From the utility main menu, select 1. Create RAID V olume, then press <Enter>. This screen appears. Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH9R wRAID5 Copyright(C) 2003-05 Intel Corporation. All Rights Reserved. [ CREATE ARRAY MENU ] [ DISK/VOLU[...]

5-38 Chapter 5: Software support 4. The Disks item is highlighted, press <Enter> to select the hard disk drives to congure as RAID. The following pop-up screen appears. [ SELECT DISKS ] [ ↑↓ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete Port Drive Model Serial # Size Status 0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk 1 XX[...]

ROG Blitz Formula 5-39 5.5 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing Windows ® XP operating system on a hard disk drive that is included in a RAID set. For Windows ® Vista™ operating system, use either a oppy disk or a USB device with the RAID driver . 5.5.1 Creating a RAID driver disk withou[...]

5-40 Chapter 5: Software support T o install the RAID driver in Windows ® Vista™: 1. Insert the oppy disk/USB device with RAID driver into the oppy disk drive/U SB port. 2. During the OS installation, select Intel ICH9R . 3. Follow the succeeding screen instructions to complete the installation.[...]

A CPU features The Appendix describ es the CPU features and technologies that the motherboard supports as well as the debug code table for the LCD Poster .[...]

ROG Blitz Formula Chapter summary A A.1 Intel ® EM64T .................................................................................. A-1 A.2 Enhanced Intel SpeedStep ® T echnology (EIST) ........................ A-1 A.3 Intel ® Hyper-Threading T echnology ........................................... A-3 A.4 Debug Code T able .................[...]

ROG Blitz Formula A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T . Y ou can download the latest BIOS le from the ASUS website (www .asus.com/ support/download/) if you need to update the BIOS le.[...]

A-2 Appendix: CPU features A.2.2 Using the EIST T o use the EIST feature: 1. T urn on the computer , then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Conguration, then press <Enter>. 3. Set the Intel(R) SpeedStep T echnology item to [Automatic], then press <Enter>. See page 4-26 for details. 4. Press <F10> t[...]

ROG Blitz Formula A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading T echnology . • Hy per -Thr ead ing Te chn ol ogy is sup por ted und er Win dow s ® Vista/XP and Linux 2.4.x (kernel) and later versions only . Under Linux, use the Hyper- Threading compiler to c[...]

A-4 Appendix: CPU features A.4 Debug Code Table Code Description CPU INIT CPU Initiation DET CPU T est CMOS R/W functionality . CHIPINIT Early chipset initialization: -Disable shadow RAM -Disable L2 cache (socket 7 or below) -Program basic chipset registers DET DRAM Detect memory -Auto-detection of DRAM size, type and ECC. -Auto-detection of L2 cac[...]

ROG Blitz Formula A-5 CPUSPEED 1. Program CPU internal MTRR (P6 & PII) for 0-640K memory address. 2. Initialize the APIC for Pentium class CPU. 3. Program early chipset according to CMOS setup. Example: onboard IDE controller . 4. Measure CPU speed. 5. Invoke video BIOS. TESTVRAM 1. Initialize multi-language 2. Put information on screen display[...]

A-6 Appendix: CPU features CPU CHG CPU change CPR F AIL CPR error F AN F AIL Fan error UCODEERR UCODE error FLOPYERR Floppy error KB ERROR Keyboard error HD ERR HDD error CMOS ERR CMOS error MS ERROR Mouse error 80P ERR 80 port error BOOT CHG Boot device change SMARTERR HDD smart function error HM ERROR Hard monitor error AINETERR AI NET error CASE[...]