Asus P2V Bedienungsanleitung

® P2V Pentium ® II/Celeron ™ Motherboard USER’S MANUAL[...]

ASUS P2V User’ s Manual 2 USER'S NOTICE Product Name: ASUS P2V Manual Revision: 1.01 E384 Release Date: May 1999 No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except document[...]

ASUS P2V User’ s Manual 3 ASUS CONT ACT INFORMA TION ASUST eK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw T echnical Support T el (English): +886-2-2894-3447 ext. 706 T el (Chinese): +886-2-2894-3447 ext. 1 1 1 Fax: +886-2[...]

ASUS P2V User’ s Manual 4 CONTENTS I. INTRODUCTION 7 How this Manual is Or ganized ........................................................... 7 Item Checklist ..................................................................................... 7 II. FEA TURES 8 Features of the ASUS P2V Motherboard ............................................ 8 [...]

ASUS P2V User’ s Manual 5 CONTENTS Chipset Features Setup ................................................................ 44 Details of Chipset Features Setup .......................................... 44 Power Management Setup ........................................................... 47 Details of Power Management Setup ......................[...]

ASUS P2V User’ s Manual 6 FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undes[...]

ASUS P2V User’ s Manual 7 I. INTRODUCTION I. INTRODUCTION Manual / Checklist How this Manual is Organized This manual is divided into the following sections: I. Introduction: Manual information and checklist II. Featur es: Information and specifications concerning this product III. Installation: Instructions on setting up the motherboard IV . BIO[...]

8 ASUS P2V User’ s Manual Features of the ASUS P2V Motherboard The ASUS P2V is carefully designed for the demanding PC user who wants ad- vanced features processed by the fastest CPU. • Multi-Speed: Supports Intel Pentium ® II (2 33 to 500M H z) and Celeron TM (266MHz and faster) processors. • Multi-Cache: Supports processors with or without[...]

ASUS P2V User’ s Manual 9 The ASUS P2V Motherboard II. FEA TURES II. FEA TURES Motherboard Parts T : USB Port 1 B: USB Port 2 B: COM 1 B: COM 2 Programmable 2Mbit Flash EEPROM 3 ISA Slots T : PS/2 Mouse B: PS/2 Keyboard T : Parallel B: Serial 3 DIMM Sockets Chipset CPU Slot 1 A TX Power Connector 4 PCI Slots Universal Folding Retention Mechanism [...]

10 ASUS P2V User’ s Manual III. INST ALLA TION Layout of the ASUS P2V Motherboard FLOPPY SECONDARY IDE PRIMARY IDE CR2032 3V Lithium Cell (CMOS Power) CPU_F AN DIMM Socket 1 (64/72 bit, 168 pin module) DIMM Socket 2 (64/72 bit, 168 pin module) DIMM Socket 3 (64/72 bit, 168 pin module) Accelerated Graphics Port PCI Slot 4 ISA Slot 3 VIA VT82C596A [...]

ASUS P2V User’ s Manual 11 III. INST ALLA TION Jumpers 1) KBPWR p. 12 Keyboard Power 2) AGPFS p. 13 AGP Frequency Selection 3) VIO p. 13 V oltage Input/Output Selection 4) FS0, FS1, FS2, FS3 p. 14 CPU External Clock (BUS) Frequency Selection 5) BF0, BF1, BF2, BF3 p . 14 CPU Core:BUS Frequency Multiple Expansion Slots/Sockets 1) System Memory p . [...]

12 ASUS P2V User’ s Manual III. INST ALLA TION Jumpers III. INST ALLA TION Installation Steps Before using your computer , you must complete the following steps: 1. Set Jumpers 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet W ires, and Power Supply 6. Setup the B[...]

ASUS P2V User’ s Manual 13 III. INST ALLA TION III. INST ALLA TION Jumpers 2. AGP Frequency Selection (AGPFS) This option sets the frequency ratio between the AGP bus frequency and the CPU bus frequency . The default sets the AGP frequency to 2/3 of the CPU bus or host frequency . IMPOR T ANT : Due to limitations in the VIA Apollo Pro Plus chipse[...]

14 ASUS P2V User’ s Manual III. INST ALLA TION Jumpers III. INST ALLA TION BF2 BF1 BF3 CPU Core:BUS Frequency Multiple P2V CPU Settings R BF0 BF2 BF1 BF3 BF0 BF2 BF1 BF3 BF0 BF2 BF1 BF3 BF0 BF2 BF1 BF3 BF0 BF2 BF1 BF3 BF0 BF2 BF1 BF3 BF0 2.0x (2/1) 2.5x (5/2) 3.0X (3/1) 3.5X (7/2) 4.0X (4/1) 4.5X (9/2) 5.0X (5/1) 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 1[...]

ASUS P2V User’ s Manual 15 NOTES • Overclocking your processor is not recommended. It may result in a slower speed. V oltage Regulator Output Selection (VID) is not needed for the Pentium III / II / Celeron processors because they send VID signals directly to the onboard power controller . • For updated processor settings, visit the ASUS web [...]

16 ASUS P2V User’ s Manual (This page was intentionally left blank.)[...]

ASUS P2V User’ s Manual 17 III. INST ALLA TION System Memory 2. System Memory (DIMM) This motherboard uses o nly Dual Inline Memory Modules (DIMMs). Three sockets are available for 3.3V olt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of either 8, 16, 32, 64, 128 o r 25 6MB to form a memory size between 8MB to 76 8MB.[...]

18 ASUS P2V User’ s Manual System Memory III. INST ALLA TION III. INST ALLA TION DIMM Memory Installation Procedures: Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation as shown. DRAM SIMM modules have the same pin contacts on both sides. SDRAM DIMMs ha[...]

ASUS P2V User’ s Manual 19 III. HARDW ARE SETUP CPU III. H/W SETUP 3. Central Processing Unit (CPU) NOTE: The following pictures are provided for reference purposes only . The ap- pearance of your retention mechanism and fan may be dif ferent from the following examples. Y our motherboard provides a Slot 1 connector for a Pentium ® III processor[...]

20 ASUS P2V User’ s Manual III. HARDW ARE SETUP CPU III. H/W SETUP 2. Attach the Heatsink NOTE: If provided, you should follow the heatsink attachment instructions that came with your heatsink or processor . The following steps are provided only as a general guide and may not reflect those for your heatsink. The URM is now ready for the installat[...]

ASUS P2V User’ s Manual 21 III. HARDW ARE SETUP CPU III. H/W SETUP 3 . Insert the SEC C/SECC2/SEPP SECC with Pentium ® II only: Push the SECC’ s two locks inward until you hear a click (the picture i n step 2 shows the locks in the outward position and inward in the picture below). W ith the heatsink facing the motherboard’ s chipset, push t[...]

22 ASUS P2V User’ s Manual III. HARDW ARE SETUP CPU III. H/W SETUP ASUS Smart Thermal Solutions ASUS provides two smart solutions to Slot 1 CPU thermal problems: the ASUS Smart Fan or ASUS S-P2F AN and the ASUS P2T -Cable . ASUS S-P2F AN The optional ASUS Smart Fan or ASUS S-P2F AN is a CPU fan for a Pentium ® II processor packaged in an SECC. U[...]

ASUS P2V User’ s Manual 23 III. HARDW ARE SETUP CPU III. H/W SETUP Recommended Heatsinks for Slot 1 Processors The recommended heatsinks for the Slot 1 processors are those with three-pin fans, such as the ASUS Smart Fan, that can be connected to the motherboard’ s CPU fan connector . These heatsinks dissipate heat more ef ficiently and with an[...]

24 ASUS P2V User’ s Manual III. HARDW ARE SETUP Expansion Cards III. H/W SETUP 4. Expansion Cards Expansion Card Installation Procedure 1. Read the documentation for your expansion card and make any necessary hard- ware or software settings for your expansion card, such as jumpers. 2. Remove your computer system’ s cover and the bracket plate o[...]

ASUS P2V User’ s Manual 25 III. INST ALLA TION T o simplify this process, this motherboard complies with the Plug and Play (PnP specification, which was developed to allow automatic system configuration when- ever a PnP-compliant card is added to the system. For PnP cards, IRQs are assigned automatically from those available. If the system has bo[...]

26 ASUS P2V User’ s Manual 5. External Connectors IMPOR T ANT : Ribbon cables should always be connected with the red stripe to Pin 1 on the connectors. Pin 1 is usually on the side closest to the power connector on hard drives and CD-ROM drives, but may be on the opposite side on floppy disk drives. Check the connectors before installation becau[...]

ASUS P2V User’ s Manual 27 III. INST ALLA TION DMA Channels III. INST ALLA TION Connectors III. INST ALLA TION 3. Parallel Port Connector (25-pin Female) Y ou can enable the parallel port and choose the IRQ through “Onboard Parallel Port” in Chipset Features Setup of the BIOS SOFTW ARE. NOTE : Serial print- ers must be connected to the serial[...]

28 ASUS P2V User’ s Manual Connectors III. INST ALLA TION III. INST ALLA TION 6. Universal Serial BUS Ports 1 & 2 (T wo 4-pin Female) T wo USB ports are available for connecting USB devices. Universal Serial Bus (USB) 2 USB 1 7. Primary / Secondary IDE Connectors (T wo 40-1pin IDE) These connectors support the provided IDE hard disk ribbon ca[...]

ASUS P2V User’ s Manual 29 III. INST ALLA TION Connectors III. INST ALLA TION 9. Chassis / CPU / Power Supply Fan Connectors ( 3-pin F AN) These connectors support cooling fans of 500mA (6W) or less. Orientate the fans so that the heatsink fins allow airflow to go across the onboard heatsink(s) instead of the expansion slots. Depending on the fan[...]

30 ASUS P2V User’ s Manual III. INST ALLA TION Connectors III. INST ALLA TION 1 1. IrDA-Compliant Infrared Module Connector (5-pin IR) This connector supports the optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. Y ou must also configure the setting throu[...]

ASUS P2V User’ s Manual 31 III. INST ALLA TION Connectors III. INST ALLA TION 13. W ake-on-LAN Connector (3-pin WOL_CON) The WOL_CON connector powers up the system when a wakeup packet or signal is received from the network through the ASUS PCI-L101 LAN card (see section VII. ASUS LAN Card ). IMPOR T ANT : This feature requires that the W AKE On [...]

32 ASUS P2V User’ s Manual III. INST ALLA TION Connectors III. INST ALLA TION 15. Message LED Lead (MSG.LED) This indicates whether a message has been received from a fax/modem. The LED will remain lit when there is no signal and blink when there is data transfer or waiting in the inbox. This function requires ACPI OS and driver support. 16. SMI [...]

ASUS P2V User’ s Manual 33 III. INST ALLA TION Power Connection Procedures 1. After all connections are made, close the system case cover . 2. Be sure that all switches are of f (in some systems, marked with ). 3. Connect the power supply cord into the power supply located on the back of your system case according to your system user ’ s manual[...]

ASUS P2V User’ s Manual 34 IV . BIOS Flash Memory Writer IV . BIOS SOFTW ARE Flash Memory W riter Utility This motherboard has an onboard SCSI BIOS and boot virus protection and therefore, re- quires a 2Mbit flash ROM. AFLASH.EXE: This is the Flash Memory W riter utility that updates the BIOS by uploading a new BIOS file to the 2Mbit programmable[...]

ASUS P2V User’ s Manual 35 IV . BIOS Flash Memory Writer IV . BIOS SOFTW ARE When prompted to confirm the BIOS update, press Y to start the update. 2. Update BIOS Including Boot Block and ESCD This option updates the boot block, the baseboard BIOS, and the ACPI extended system con- figuration data (ESCD) parameter block from a new BIOS file. See [...]

ASUS P2V User’ s Manual 36 IV. BIOS Updating BIOS IV . BIOS SOFTW ARE Managing and Updating Y our Motherboard’s BIOS Upon First Use of the Computer System 1. Create a bootable system floppy disk by typing [FORMA T A:/S] from the DOS prompt without creating “AUT OEXEC.BA T” and “CONFIG.SYS” files. 2. Copy AFLASH.EXE to the just created b[...]

ASUS P2V User’ s Manual 37 IV . BIOS SOFTW ARE 6. BIOS Setup IV . BIOS BIOS Setup The motherboard supports 5-V olt programmable Flash ROM chip. This memory chip can be updated when BIOS upgrades are released. Use the Flash Memory W riter utility to download the new BIOS file into the ROM chip as described in detail in this section. All computer m[...]

ASUS P2V User’ s Manual 38 IV . BIOS SOFTW ARE IV . BIOS Standard CMOS Load Defaults The “Load BIOS Defaults” option loads the minimum settings for troubleshooting. “ Load Setup Defaults ”, on the other hand, is for loading optimized defaults for regular use. Choosing defaults at this level, will modify all applicable settings. A section [...]

ASUS P2V User’ s Manual 39 IV . BIOS SOFTW ARE IV . BIOS Standard CMOS Ti m e T o set the time, highlight the “T ime” field and then press either <Page Up>/<Page Down> or <+>/<–> to set the current time. Follow the hour , minute and second format. V alid values for hour , minute and second are: (Hour: (00 to 23), Min[...]

ASUS P2V User’ s Manual 40 IV . BIOS SOFTW ARE IV . BIOS Standard CMOS Auto detection of hard disks on bootup For each field: Primary Master , Primary Slave, Secondary Master , and Secondary Slave, you can select Auto under the TYPE and MODE fields. This will enable auto detection of your IDE hard disk during bootup. This will allow you to change[...]

ASUS P2V User’ s Manual 41 IV . BIOS SOFTW ARE IV . BIOS BIOS Features BIOS Features Setup This “BIOS Features Setup” option consists of configuration entries that allow you to improve your system performance, or let you set up some system features accord- ing to your preference. Some entries are required by the motherboard’ s design to rem[...]

ASUS P2V User’ s Manual 42 IV . BIOS SOFTW ARE IV . BIOS BIOS Features CPU Level 2 Cache ECC Check (Disabled) This function controls the ECC check capability in the CPU level 2 cache. BIOS Update (Enabled) This functions as an update loader integrated into the BIOS to supply the processor with the required data. The BIOS will load the update on a[...]

ASUS P2V User’ s Manual 43 IV . BIOS SOFTW ARE IV . BIOS BIOS Features PS/2 Mouse Function Contr ol (Auto) The default of Auto allows the system to detect a PS/2 mouse on bootup. If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved for expansion cards if a PS/2 mouse is not detected. Enabled will always reserve IRQ12, whethe[...]

ASUS P2V User’ s Manual 44 IV . BIOS SOFTW ARE IV . BIOS Chipset Features Chipset Features Setup This “Chipset Features Setup” option controls the configuration of the board’ s chipset. Control keys for this screen are the same as for the previous screen. NOTE: SETUP Defaults are noted in parenthesis next to each function heading. Details o[...]

ASUS P2V User’ s Manual 45 IV . BIOS SOFTW ARE IV . BIOS Chipset Features PCI to DRAM Prefetch (Disabled) Leave on default setting for best stability . Byte Merge (Disabled) Leave on default setting for compatibility . Set to Enabled for increased performance in some PCI VGA cards. DRAM Read Latch Delay (1.0 ns) This controls the timing point for[...]

ASUS P2V User’ s Manual 46 IV . BIOS SOFTW ARE Onboard FDC Controller (Enabled) When Enabled , this field allows you to connect your floppy disk drives to the onboard floppy disk drive connector instead of a separate controller card. If you want to use a different controller card to connect the floppy disk drives, set this field to Disabled . Onb[...]

ASUS P2V User’ s Manual 47 IV . BIOS SOFTW ARE IV . BIOS Power Management Power Management Setup This “Power Management Setup” option allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity . NOTE: SETUP Defaults are noted in parenthesis next to each function h[...]

ASUS P2V User’ s Manual 48 IV . BIOS SOFTW ARE IV . BIOS Power Management V ideo Off Method (DPMS OFF) This field defines the video off features. The following options are available: DPMS OFF , DPMS Reduce ON , Blank Scr een , V/H SYNC+Blank, DPMS Standby , and DPMS Suspend . The DPMS (Display Power Management System) features allow the BIOS to c[...]

ASUS P2V User’ s Manual 49 IV . BIOS SOFTW ARE IV . BIOS Power Management PWR Up On Modem Act (Enabled) This allows either settings of Enabled or Disabled for powering up the computer (turns the A TX power supply on) when the modem receives a call while the computer is Soft Off . NOTE: The computer cannot receive or transmit data until the comput[...]

ASUS P2V User’ s Manual 50 IV . BIOS SOFTW ARE Plug & Play / PCI IV. BIOS PNP and PCI Setup This “PNP and PCI Setup” option configures the PCI bus slots. All PCI bus slots on the system use INT A#, thus all installed PCI cards must be set to this value. NOTE: SETUP Defaults are noted in parenthesis next to each function heading. Details o[...]

ASUS P2V User’ s Manual 51 IV . BIOS SOFTW ARE IV . BIOS Plug & Play / PCI DMA x Used By ISA (No/ICU) These fields indicate whether or not the displayed DMA channel for each field is being used by a legacy (non-PnP) ISA card. A vailable options include: No/ICU and Ye s . The first option, the default setting, indicates either that the display[...]

ASUS P2V User’ s Manual 52 IV . BIOS SOFTW ARE Load Defaults IV. BIOS Load BIOS Defaults This “Load BIOS Defaults” option allows you to load the troubleshooting default values permanently stored in the BIOS ROM. These default settings are non-opti- mal and disable all high performance features. T o load these default settings, high- light “[...]

ASUS P2V User’ s Manual 53 IV . BIOS SOFTW ARE Supervisor Password and User Password These two options set the system passwords. “Supervisor Password” sets a pass- word that will be used to protect the system and the Setup utility; “User Password” sets a password that will be used exclusively on the system. By default, the system comes wi[...]

ASUS P2V User’ s Manual 54 IV . BIOS SOFTW ARE IV . BIOS Hard Disk Detect IDE HDD Auto Detection This “IDE HDD Auto Detection” option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard CMOS Setup screen. Up to four IDE drives can be detected, with parameters for each listed inside the box. T o ac[...]

ASUS P2V User’ s Manual 55 IMPOR T ANT : If your hard disk was already formatted on an older previous system, incorrect parameters may be detected. Y ou will need to enter the correct parameters manually or use low-level format if you do not need the data stored on the hard disk. If the parameters listed dif fer from the ones used when the disk w[...]

ASUS P2V User’ s Manual 56 V . DESKT OP MANAGEMENT Desktop Management Interface (DMI) V . DMI DMI Introduction Introducing the ASUS DMI Configuration Utility This motherboard supports DMI within the BIOS level and provides a DMI Con- figuration Utility to maintain the Management Information Format Database (MIFD). DMI is able to auto-detect and r[...]

ASUS P2V User’ s Manual 57 V . DESKT OP MANAGEMENT V . DMI Using DMI Utility Using the ASUS DMI Configuration Utility NOTE: The following screen displays are provided as examples only and may not reflect the screen contents on your system. Edit DMI (or delete) Use the ←→ (left-right) cursors to move the top menu items and the ↑↓ (up-down)[...]

ASUS P2V User’ s Manual 58 V . DESKT OP MANAGEMENT Save MIFD Y ou can save the MIFD (normally only saved to flash ROM) to a file by entering the drive and path here. If you want to cancel save, you may press ESC and a message “Bad File Name” appears here to show it was not saved. Load MIFD Y ou can load the disk file to memory by entering a d[...]

ASUS P2V User’ s Manual 59 VI. ASUS LAN Card Parts / Layout VI. ASUS LAN Card ASUS PCI-L101 Fast Ethernet Card LAN Activity Output Signal RJ45 LEDs Motherboard type Wake on LAN Output Signal ASUS Other Intel Chipset If you are using the ASUS PCI-L101 on an ASUS motherboard, leave the jumper on its defaut setting of “ASUS.” If you are using an[...]

60 ASUS P2V User’ s Manual VI. ASUS LAN Card Information VI. ASUS LAN Card Features • Intel 82558 Ethernet LAN Controller (Fully integrated 10BASE-T/100BASE-TX) • W ake-On-LAN Remote Control Function Supported • PCI Bus Master Complies to PCI Local Bus Rev . 2.1 specifications • Consists of MAC & PHY (10/100Mbps) interfaces • Compli[...]

ASUS P2V User’ s Manual 61 (This page was intentionally left blank.)[...]

62 ASUS P2V User’ s Manual (This page was intentionally left blank.)[...]

ASUS P2V User’ s Manual 63 (This page was intentionally left blank.)[...]

64 ASUS P2V User’ s Manual (This page was intentionally left blank.)[...]