Atlantis Land A02-RA241 Bedienungsanleitung

Where solutions begin WebShare 241 ROUTER ADSL2+ A02-RA241 USER’S MANUAL A02-RA241_ME01 Company certified ISO 9001:2000[...]

[...]

WEBSHARE 241 Copyright The Atlantis Land logo is a registered tradem ark of Atlantis Land SpA. All other names mentioned mat be trademarks or regi stered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. CE Mark Warning This is a Class B product. In a domestic environment, t[...]

WEBSHARE 241 TABLE OF CONTENTS CHAPTER 1 ............................................. 1 1.1 A N O VERVIEW OF THE W EB S HARE 241 ....................................................................................... 1 1.2 P ACKAGE C ONTENTS ...........................................................................................................[...]

WEBSHARE 241 3.6.3.3.4 Backup/Restore .................................................................................................. 36 3.6.3.3.5 Restart .................................................................................................................. 37 3.6.3.3.6 User Management ................................................[...]

[...]

WEBSHARE 241 1 Chapter 1 Introduction 1.1 An Overview of the WebShare 241 Broadband Sharing and IP sharing The WebShare 241 supports 4 x 10/100 Mbps auto-negotiating Fast Ethernet ports for connection to your PC or LAN and downstream (with built-in ADSL2+ modem) rate up to 24Mbps. Power by NAT technology, dozens of netwo rk users can surf on the In[...]

WEBSHARE 241 2 If any of the above items are mi ssing, please contact your reseller. 1.3 WebShare 241 Features ADSL Router2+ provides the following features: • ADSL Multi-Mode Standard: Supports downstream transmission rates of up to 8Mbps, the router is capable of up to 12/24 Mbps with ADSL2/ 2+, and upstream transmission rates of up to 1024Kbps[...]

WEBSHARE 241 3 • Security, Security is increased with the reduction of opportunity in eavesdropping on a broadcast network because data will be switched to only those confidential users within the VLAN. • Cost Reduction, VLANs can be used to create multiple broadcast domains, thus eliminating the need of expensive routers. • Port-based (or po[...]

WEBSHARE 241 4 • Static and RIP1/2 Routing: Supports an easy static table or RIP1/2 routing protocol to support routing capability. • SNTP: An easy way to get the network real time information from an SNTP server. • SNMP: SNMP is an application layer protocol that is used for managing networks (V1,V2 and V3) • Web based GUI: supports web ba[...]

WEBSHARE 241 5 1.4 WebShare 241 Application[...]

WEBSHARE 241 6 Chapter 2 Using WebShare 241 2.1 Cautions for using the WebShare 241 Do not place the WebShare 241 under high humidity and high temperature. Do not use the same power source for WebShare 241 with other equipment. Do not open or repair the case yourself. If the WebShare 241 is too hot, turn off the power immediately and have a qualifi[...]

WEBSHARE 241 7 LED Meaning PWR Lights when power ON. SYS Lights when system is ready. LAN Lights when connected to Ethernet device: • Green for 100Mbps; Orange for 10Mbps • Blinking when data transmit/received. ADSL Lights when successfully connected to an ADSL DSLAM. PPP Steady glow when there is a PPPoA / PPPoE connection. 2.3 The Rear Ports [...]

WEBSHARE 241 8 jack. 2.4 Cabling The most common problem is bad cabling or ADSL line. Ma ke sure that all connected devices are turned on. On the front of the product is a bank of LE Ds. As a first check, verify that the LAN Link, ADSL , PWR, SYS LEDs are lit. If they are no t, verify that you are using the proper cables. Ensure that all other devi[...]

WEBSHARE 241 9[...]

WEBSHARE 241 10 Chapter 3 Configuration The WebShare 241 can be configured with your W eb browser. The web browser is included as a standard application in t he following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration[...]

WEBSHARE 241 11 3.3 Configuring PC in Windows For Windows 95/98/ME 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Ne twork Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. In[...]

WEBSHARE 241 12 5. Then select the DNS Configuration tab. 6. Select the Disable DNS radio button and click “OK” to finish the configuration.[...]

WEBSHARE 241 13 For Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and clic k “OK” .[...]

WEBSHARE 241 14 For Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click LAN Are a Connection . 3. In the LAN Area Connection Status window, click Properties .[...]

WEBSHARE 241 15 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click “OK” to finish the configuration.[...]

WEBSHARE 241 16 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties .[...]

WEBSHARE 241 17 4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6. Click “OK” to finish the configuration.[...]

WEBSHARE 241 18 3.4 Factory Default Settings Before configurating this WebShare 241, y ou need to know the following default settings. • Username: admin • Password : atlantis • IP Address : 192.168.1.254 • Subnet Mask : 255.255.255.0 • DHCP server is enabled. 3.4.1 Username and Password The default usernam e and password are admin and atl[...]

WEBSHARE 241 19 LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled N/A 3.5 Information from the ISP Before configuring this device, you have to c heck with your ISP (Inter net Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA. Gather the information as illustrated i[...]

WEBSHARE 241 20 You will get a status report web page when login successfully. At the configuration homepage, the left navigation page where bookmarks are provided links you directly to the desir ed setup page, including: • Status (ARP Table, Rout ing Table, DHCP Table, System Log, Security Log) • Quick Start • Configuration (LAN, WAN, System[...]

WEBSHARE 241 21 • #: Item number • Destination: IP address of the destination network. • Netmask: The destination netmask address. • Gateway/Interface : IP address of the gateway or ex isting interface that this route uses. • Cost: The cost of transmission for routi ng purposes. The number need not be precise, but it must be between 0 and[...]

WEBSHARE 241 22 3.6.1.5 Security Log Display the information of security logs. If hacke r attacks your sever, he will be isolated by the firewall function and the router will record related information. Hence, you know wh ere the hacker comes from.[...]

WEBSHARE 241 23 3.6.2 Quick Start Guide For detailed instructions on c onfiguring WAN settings, see the WAN section of this manual. The information you need for the Quick Start wizard to get you online are your login (often in the form of username@ispname), your password, and the encapsulation type. Your ISP can supply all the details you need. Alt[...]

WEBSHARE 241 24 Optional Setting • IP Address: Type your ISP assigned IP address in the IP Address text box. • Subnet Mask: Enter a subnet mask in dotted decimal notation. • Default Gateway: You must specify a gateway IP address (supplied by your ISP) DNS • Obtain DNS automatically: Select this check box to use DNS. • Primary DNS: Enter t[...]

WEBSHARE 241 25 3.6.3 CONFIGURATION When you click this item, you get followi ng sub-items to configure WebShare 241: • LAN • WAN • System • Firewall • QoS • Virtual Server • Advanced 3.6.3.1 LAN A Local Area Network (LAN) is a shared comm unication system to wh ich many computers are attached and is limited to t he immediate area, us[...]

WEBSHARE 241 26 To disable the router’s DHCP Server, check Disabled and click Next then click Apply. When the DHCP Server is disabled you need to manually assign a fixed IP address to each PC on your network, and set the default gateway for each PC to the IP address of the router (the default is 192.168.1.254). To configure the router ’s DHCP S[...]

WEBSHARE 241 27[...]

WEBSHARE 241 28 3.6.3.2 WAN Before you start installing this device, you hav e to check with your ISP what kind of service (connection method) is provided such as PPPo E, PPPoA, RFC1483 bridged or routed, IP oA. Gather the information as illustrated in the following table and keep it for reference. PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Us[...]

WEBSHARE 241 29 PPPoE(RFC 2516) or PPPoA(RFC 2364) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides access control and billing functionality in a manner similar to dial-up services using PPP. • Description: [...]

WEBSHARE 241 30 • Connect to Demand(PPPoE only): If you want to establish a PPPoE session only when there is a packet requesting a ccess to the Internet (i.e. when a program on your computer atte mpts to access the In ternet). • Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the line for a predetermine[...]

WEBSHARE 241 31 RFC 1483 Routing • Description: Your description of this connection. • VPI and VCI: Enter the information provided by your ISP. • NAT: The NAT (Network Address Translation) f eature allows multiple users to access the Internet through a single IP account, sharing the singl e IP address. If users on your LAN have public IP addr[...]

WEBSHARE 241 32 BRIDGE (PPPoE) • Description: A user-definable name for this connection. • VPI/VCI: Enter the information provided by your ISP. • Encapsulation method: Select the encapsulation forma t, this is provided by your ISP. 3.6.3.2.2 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Inter[...]

WEBSHARE 241 33 3.6.3.2.3 ADSL • ADSL Mode: There are four modes “ Annex A ”,” Annex L ”,” Annex M” ,” Annex J” , that user can select for this connection. • Modulator: There are four modes “ AUTO ”,” ADSL multimode ”,” ADSL2 ”and” ADSL2+ ” that user can select for this connection. • DSP Firmware Version: DSP c[...]

WEBSHARE 241 34 3.6.3.3 System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. 3.6.3.3.1 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the current time from an SNTP server outside y[...]

WEBSHARE 241 35 3.6.3.3.3 Firmware Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of your r outer as a dedicated computer, and the firmware as the software it runs. Over time this software may be impr oved and modified. Your router allows you to upgrade the software it runs to take[...]

WEBSHARE 241 36 3.6.3.3.4 Backup/Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if y ou wish to experiment with different settings, knowing that you have a backup handy in the case of any mistakes. It is advisable to backup your rout[...]

WEBSHARE 241 37 3.6.3.3.5 Restart Click Restart with option Current Settings to reboot your router and restore your last saved configuration. If you wish to restart the router using the fa ctory default settings (f or example, after a firmware upgrade or if you have saved an incorrect confi guration), select Factory Default Settings to reset to fac[...]

WEBSHARE 241 38 3.6.3.4 Firewall Your router includes a full DoS firewall for cont rolling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT (Network Address Translation. Please see the WAN configuration section for more details on NAT) the router acts as a “natural” In ternet[...]

WEBSHARE 241 39 Packet filtering function enables you to configure your router to check specified internal/external user (IP address) from Internet access, or y ou can disable specific service request (Port number) to /from Internet. This c onfiguration program a llows you to set up different filter rules up to 10 for different users based on their[...]

WEBSHARE 241 40 • Packet Type: Specify the packet type (TCP, UDP, IC MP or any) that the rule will be applied to.Select TCP if you want to scope for the connection-based application service on the remote server using the po rt number. Or select UDP if you want to scope for the connectionless application serv ice on the remote server using the por[...]

WEBSHARE 241 41 http(OutGoing/Ingoing):[...]

WEBSHARE 241 42 POP3 (OutGoing/Ingoing):[...]

WEBSHARE 241 43 SMTP (OutGoing/Ingoing):[...]

WEBSHARE 241 44 FTP (OutGoing/Ingoing)::[...]

WEBSHARE 241 45 DNS (OutGoing/Ingoing): 3.6.3.4.2 MAC address Filtering MAC filtering function enables you to configure y our ADSL Firewall Rout er to block internal user ( MAC address ) from Internet access. If you check Enable, remember to choosea defaulkt rules policy between Forward or Drop . If you select Forward , the packet with the MAC addr[...]

WEBSHARE 241 46 • Active: Select Yes from the drop down list box to enable MAC address filtering. • Action When Matched: Select “Drop” or “Forward”. • Log: Choose “Yes” if you wish to generate l ogs when the filer ru le is applied to a packet. • MAC Address: Enter the MAC addresses you wish to manage. 3.6.3.4.3 Intrusion Detecti[...]

WEBSHARE 241 47 • Alert Mail Time: Set the time for re ceiving Alert mail. • Your E-Mail: Set your email address. • Recipient’s E-mail: Set the Recipient’s email address to which the E-<mail notification is sent. • SMTP server: Set the SMTP (mail) server address. 3.6.3.4.4 Block Wan Request The “ Block WAN Request ” is a stand-al[...]

WEBSHARE 241 48 From/To: IP Address Block Mode: You can select when Router have yo use thess settings Keywords Filtering: Allows blocking by specific keywords wit hin a partic ular URL rather than having to specify a complete URL (e.g. to blo ck any image called “advertisement.gif”). When enabled, your specified keywords list will be ch ecked t[...]

WEBSHARE 241 49 Restrict URL Features • Block Java Applet: Blocks Web content whic h includes the Java Applet to prevent someone who wants to damage your system via the standard HTTP protocol. • Block ActiveX: Blocks ActiveX • Block Cookies: Blocks Cookies • Block Proxy: Blocks Proxy[...]

WEBSHARE 241 50 3.6.3.5 QoS Quality of Service Introduction If you’ve ever found your ‘net’ speed has slow ed to a crawl because another family member is using a P2P file sharing pr ogram, you’ll understand why the Qua lity of Service features in routers is such a breakthrough for home users and office users. QOS: Keeping Your Net Conne cti[...]

WEBSHARE 241 51 Application : A name that identifie s an existing policy. Time Schedule : Scheduling your QOS policy to be applied. Direction : The traffic flow direction to be controlled by the QOS policy. There are two settings to be provided in the Router: ~ LAN to WAN: You want to control the traffic flow from the local netwo rk to the outside [...]

WEBSHARE 241 52 : Before using these buttons to edit or delete a policy, please select one policy you want to edit/delete from the radio option . : After you have configured the policies, you can press this button to apply the configuration. If you want to make the change persistent in flash, choose in the left windows to save it into flash. When y[...]

WEBSHARE 241 53 ~ GRE: For PPTP VPN Connections. Assigned Data rate: Assign the data ratio for this poli cy to be controlled. For examples, we want to only allow 20% of the total data trans fer rate for the LAN-to -WAN direction to be used for FTP server. Then we can specify her e with data ratio = 20. If you have ADSL LINE with 256K/bps.rate, the [...]

WEBSHARE 241 54 Silver service (L) Class 2, Gold (010010) Silver service (M) Class 2, Silver (010100) Silver service (H) Class 2, Bronze (010110) Bronze service (L) Class 3, Gold (011010) Bronze service (M) Class 3, Silver (011100) Bronze service (H) Class 3, Bronze (011110) Local Machine IPs : The IP address values for Local LAN machines you want [...]

WEBSHARE 241 55 QOS example for your Network Connection Diagram ADSL Subscription Rate Upstream: 256 kbps Downstream: 1024 Mbps Example QOS Plan :. Application IP or Ports Control Flow Data Rate Time Schedule VoIP User 192.168.1.1 Outgoing Minimal 20% with high priority for non-used bandwidth with SDCP marking Class 1 Gold Service Always FTP Sever [...]

WEBSHARE 241 56 Example QOS Setup[...]

WEBSHARE 241 57 VoIP application Voice is latency-sensitive application. Most Vo IP devices are use SIP protocol and the port number will be assigned by SIP module automatic ally. Better to use fi xed IP address for catching VoIP packets as high priority. Above settings will help to improve quality of your VoIP service when traffic is full loading.[...]

WEBSHARE 241 58 FTP Server Application Some of companies will setup FTP server for customer downloading or home user sharing their files by using FTP. LAN to WAN direction:[...]

WEBSHARE 241 59 WAN to LAN direction: With above settings that help to limit utilizati on of upstream of FTP. Time schedule also help you to only limit utilization at day time.[...]

WEBSHARE 241 60 HTTP Web Browsing You can control the internet web browsing by specify the HTTP 80 (8080 for some proxy server). LAN to WAN direction:[...]

WEBSHARE 241 61 WAN to LAN direction:[...]

WEBSHARE 241 62 3.6.3.6 Virtual Server When you click Virtual Server, you get the following figure. Being a natural Internet firewall, this network router protects your network from being accessed by outside users. When it needs to a llow outside users to access internal servers, e.g. Web server, FTP server, E- mail server or News server, th is mod[...]

WEBSHARE 241 63 Application OutBound Inbound ICQ 98, 99a N/A N/A NetMeeting 2.1 a 3.01 N/A 1503 TCP, 1720 TCP VDO Live N/A N/A MIRC N/A N/A Cu-SeeMe 7648 TCP &UDP, 24032 UDP 7648 TCP &UDP, 24032 UDP PC AnyWhere 5632 UDP, 22 UDP, 5631 TCP, 65301 TCP 5632 UDP, 22 UDP, 5631 TCP, 65301 TCP Edonkey N/A 4660-4662 TCP , 4665 UDP MSN Messanger N/A [...]

WEBSHARE 241 64 3.6.3.7 Advanced Configuration opt ions within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Us ers who do not underst and the features should not attempt to reconfi gure their router, unless advised to do so by support staff. • Static Route • Dynamic DNS • VLAN Cont[...]

WEBSHARE 241 65 E.G. 3.6.3.7.2 Dynamic DNS The Dynamic DNS function lets you alias a dynam ic IP address to a static hostname, so if your ISP does not assign you a static IP address you can st ill use a domain name. This is especially useful for hosting servers via your ADSL connection, so that anyone wishing to connect to you may use your domain n[...]

WEBSHARE 241 66 The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to use the service, you must first apply for an account from this free Web server http://www.dyndns.org/ . There are more than 8 DDNS servers supported. • Dynamic DNS: Select the regist[...]

WEBSHARE 241 67 Group individual ports into a sm all “Virtual” network of thei r own to be independent of the other ports. To add a VLAN group check on the port to be a member to this VLAN Group, and press “ Apply ” button to execute the setting. 3.6.3.7.4 Device Management The Device Management advanced configuration setti ngs allow you to[...]

WEBSHARE 241 68 Embedded Web Server: HTTP Port: This is the port number the r outer’s embedded web server (for web-based configuration) will use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are r unning a web server on a PC within their LAN. For Example: User A changes H TTP port number [...]

WEBSHARE 241 69 Traps supported: Cold Start, Authentication Failure. The following MIBs are supported: • RFC 1213 (MIB-II): System group Interfaces group Address Translation group IP group ICMP group TCP group UDP group EGP (not applicable) Transmission SNMP group • RFC1650 (EtherLike-MIB): dot3Stats • RFC 1493 (Bridge MIB): dot1dBase group d[...]

WEBSHARE 241 70 The WebShare 241 supports bot h IGMP version 1 (IGMP-v1 ) and IGMP version 2 (IGMP- v2). At start up, the WebShare 241 queries all directly connected netw orks to gather group membership. After that, the WebShare 241 pe riodically updates this information. IP multicasting can be enabled/disabled on the ADSL Router LAN and/or WAN int[...]

WEBSHARE 241 71 Chapter 4 Troubleshooting If the Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service pr ovider . This could save you time and effort but if the symptoms persist, then consult your service provider. Problems Starting Up the ADSL Router Problem Corrective Ac[...]

WEBSHARE 241 72[...]

WEBSHARE 241 73 APPENDIX A Traffic Shaping Traffic Shaping is an agreement between the carrier and the s ubscriber to regulate the average rate and “burstiness” or fluctuation of data transmissi on over an ATM network. This agreement helps eliminate congesti on, which is important for tran smission of real time data such as audio and video conn[...]

WEBSHARE 241 74 APPENDIX B Technical Features Protocols IP, NAT, ARP, ICMP, IGMP, DHCP(server, client and relay), RIP1/2 , SNTP clien t, UPnP, Telnet server, SNMP LAN port 4 x RJ45 10/100 Base-T ports WAN port RJ-11 (1 port ADSL) External buttons Reset LED Indicators Power, System, 4 X Lan, ADSL and PPP Standard ADSL Compliance ANSI T1.413 Issue 2,[...]

WEBSHARE 241 75 APPENDIX C Firmware Recovery The detail instruction in Emer gency /Failure Recover y Button 1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash): Hold the Emergency/Failure Recovery Butt on on the back of the modem in. Keep this button held in and turn on the modem. Once the lights on the modem[...]

WEBSHARE 241 76 APPENDIX D Support If you have any problems with the WebShare 241, please consult this manual. If you continue to have problems you should c ontact the dealer where you bought this ADSL Router. If you have any other questions you c an contact the Atlantis Land company directly at the followi ng address: Atlantis Land SpA Viale De Ga[...]