Avision DT-1110B Bedienungsanleitung

Document Scanner User’s Manual Regulatory model: DT-1106B / DT-1110B manual-en-250-0 821 -E-5200-v 1 00 Avision Inc.[...]

User’s Manual Trademarks Microsoft is a U.S. register ed trademark of Microsoft Corporation. Windows, Windows Vista, Window s 7 and Windows 8 are either registered trademarks or trademar ks of Microsoft Corporation in the United States and/or other countries. IBM, IBM PC are registered tradem arks of International Business Machines Corp. Other br[...]

User’s Manual Federal Communications Commission (FCC) compliance information statement Part 15 The product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Operation is subject t o the following two con ditions: (1) this device may not cause harm ful interference and (2) this d[...]

User’s Manual European Union Regulatory Notice Products bearing t he CE marking comply w ith the following EU Directives: z Low Voltage Directive 2006/95/EC z EMC Directive 2004/108/EC z Restriction of the use of ce rtain hazardous substances (RoHS) Directive 2011/65/EU CE compliance of th is product is valid if powered with the correct CE-marked[...]

User’s Manual Disposal of Waste Equipment by Users in Private Union This symbol on the product or on its packaging indicates that the product can not be disposed of with your other household waste. Instead it shou ld be sent to appropriate facilities f or recovery and recycling in an effo rt to protect human health and the environment. Fore more [...]

User’s Manual Table of Contents 1. Introduction .............................................. 1-1 2. Scanner Installation .................................. 2-1 2.1 Unlocking your scanner ............................... 2-2 2.2 Installing the Scann er Driver and Connectin g the Cables .................................................. 2-3 2.2.1 [...]

User’s Manual vii 4.5 The Paper Tab ......................................... 4-30 4.5.1 Cropping ....................................... 4-31 4.5.2 Other Paper Se lection ..................... 4-36 4.6 The Multi-Feed Detection Tab ..................... 4-39 4.7 The Preview Tab ...................................... 4-47 4.8 The Options Tab .....[...]

User’s Manual 1. Introduction Congratulations on your purchase of the color image scanner. Avision is one of the leading companies to make high quality color image scanner. Before you install and operate the new scanner, please take a few minutes to read through this manual. It provides proper instructions for you to unpack , install, operate and[...]

User’s Manual 1-2 1 3 4 2 1. Scanner Main Unit 2. Software CD/Quick Guide 3. USB Cable 4. Power Adapter & Power Cord Note: 1. Only use the AC adapter DA- 48M24 by APD included in the machine. Using other AC adapters may damage the machine and void the w arranty. 2. Please unpack the packing care fully, and check the contents against the check[...]

User’s Manual 2. Scanner Installation Precautions  Keep the scanner out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit.  Do not install the scanner in a humid or dusty pl ace.  Be sure to use the proper AC power source.  Place the scanner securely on an even, flat surface. Tilted or uneve[...]

User’s Manual 2.1 Unlocking your scanner To protect the scanning unit from damage during transportation, a lock switch is designed to keep the scanning unit from moving. To unlock the scanner, move the lock switch to the unlock position as shown in Fig. 2-1. Figure 2-1 Unlocking the Scanner Figure 2-2 Home position Note: If the scanning unit is n[...]

User’s Manual 2.2 Installing the Scanner Driver and Connecting the Cables NOTE: 1). The Windows system CD may be required wh en installing on some PC’s. 2). To ensure your computer ca n identify the USB scanner, please install scanner driver first before connecting the scanner to your computer. 3). The scanner driver contains TWAIN, ISIS and WI[...]

User’s Manual 2.2.2 Turning on the Power Press the Power Switch button on the front panel, the Power LED will be lit. T o turn off th e scanner, press the Pow er Switch button for about 3 seconds, th e Power LED will be of f. 2.2.3 Installing the Scanner Driver 1. Place the supplied CD-ROM onto your CD-ROM drive. 2. The software inst allation gra[...]

User’s Manual Contents on the installation graphic: y Install Button Manager V2 : To use the buttons on the scanner, you need to install Button Manager V2. To ensure Button Manager V2 works properly, please FIRST install Button Manager V2 before installing the scann er driver. y Install Scanner Driver: To communicate with your scanner, you need t[...]

User’s Manual 2-6 2.2.4 Connecting to Computer 1. Connect the square end of the USB cable to the USB port of your scanner. Connect the rectangle end to the USB port of your computer. 2. The computer should detect a new USB device and prompt a “New Hardware Found” message. 3. In Windows XP, click the Next button to continue. When the XP certif[...]

User’s Manual 3. Completing Your First Scan 3.1 Loading Your Paper 3.1.1 Notice on Using the ADF Before using the ADF, please make sure that your paper meets the following specif ications: • Document(s) can range in size from 5.8” x 8.3” (148 x 210mm) to 11.7” x 16.5” (297 x 420 mm) • Document(s) can range in weight from 16 to 28 lbs [...]

User’s Manual 3.1.2 Placing Your Document in the ADF Paper Tray Fanning Your Document Standard paper size should f eed easily through the scanner. To avoid occasional paper ja m when automatically feeding multiple documents, loosen the paper before loading. Document Feeding Place your document with the te xt face up and make the top of the page p[...]

User’s Manual 3.2 Placing paper on the document glass Place your document face down on the document glass and align the document to the reference mark as indicated. 3-3[...]

User’s Manual 3.3 Verifying Your Scanner Installation To verify if your scan ner installation is correct, Av ision provides you a useful test program called Avisi on Capture Tool. With this tool, you can perform simple scans and view the captured images. In addition, it helps you complete your scan at a rated speed. The following procedure descri[...]

User’s Manual Fit Page Actual Size Save File Path File For mat Setup Scan 3. Choose your desired fil e format from the File Format drop down list box. (D efault is BMP, ot her choice includes TIF F, MTIFF, PDF, MPDF, GIF, and JPEG.) The supported file formats vary depending on your scanner model. 4. Type your desired folder name and file name in [...]

User’s Manual Image Selection Box 6. From the Image Selection Box, choose your desired image type for your scanned image. (Default is Front B&W) If you have a duplex scanner, choose Front and Rear to scan both sides of your document. 7. Click OK to qui t the Scanner Properties dialog box. (To learn more details about the Scanner Properties di[...]

User’s Manual Status Bar Fit Page View Thumbnail View 11. You can view the scanned image in Fit Page ( ) or Actual Size (100%) button ( ) from the Viewing toolbars at the right side. 12. Click t he Close box or Quit f rom the File menu t o exit the Scan Validation Tool. 3-7[...]

User’s Manual 3-8 3.4 A Glance of the Scanner Properties Dialog Box 1 2 3 4 5 6 7 8 1. Tab Options Choice: Im age, Compression, Color Dropout, Paper, Multi-Feed Detection, Preview, Options, Settings, Information. 2. Image Selection Box Choose your image type and the side of document you wish to scan. Options vary based on type of scanner. 3. Brig[...]

User’s Manual 4. Using the Scanner P Dialog Box roperties The Scanner Properties dialog bo x allows you to confi gure the scanner’s settings. It consists of several tabbed windows each of which will be described in t his chapter. Note: In this chapter, all options are available based on a duplex (double-side) scanner. If you have purchased a si[...]

User’s Manual 4.1 Buttons on the Scanner Properties Dialog Box The buttons on the Scanner Properties dialog box Buttons Description Defaults Click the Defaults button, the factory default settings will be shown on each tab. Scan After all the scan settings are satisfactory, click the Scan button to start scanning your document. Close Click the Cl[...]

User’s Manual The following table shows the defaul t settings ： Tab name Default settings Image Image ： Front B&W Binarization ： Dynamic Threshold Resolution ： 200 dpi Invert ： Blank on White Scan Source ： Auto Document Feeder Threshold ： None Brightness ： None Contrast ： None Compression None Color Dropout None Paper Croppi[...]

User’s Manual 4.2 The Image Tab The Image tab allows you to choose the front side and (or) the rear side of your document, th e type of im age, and to set several basic scan setting s. Note that except for the resolution, you can set individual scan settings for the front side and the rear side. For example, a ll settings in the Image tab, Compre[...]

User’s Manual 4.2.1 The Image Selection Box The Image Selection box includes the image type and document side option. If you wish to scan both the front side and the rear side of your color document, you can check both Front Color and Rear Color at the same time. Note the options vary based on type of scanner. Example 1 ： Scanning a two-sided c[...]

User’s Manual Example 2 ： Scanning a two-sided color document, one in B&W(Drop Blue Color ： Threshold ： 10, Background ： 79), the other in color Side/Image Selection Front Rear Image Type Description Color Choose Color if you w ish to scan a color imag e for your original in color. Gray Choose Gray image if you r original contains act[...]

User’s Manual Front/Rear Auto Color Detection: Click to automaticall y detect and scan the front or the rear page of your color document in color image mode. If your document is in colors, th e scanner will automat ically scan the document into a color image. If your document is non-color, you can choose the output to be either B&W or Gray fr[...]

User’s Manual 4.2.2 Other Image Options Binarization This is the process of converting a grayscale or color image to a bi-tonal image. There are several different methods of performing this conversion. Options: Dynamic Threshold, Fixed Processing, Halftone 1~5, Error Diffusion . Dynamic Threshold: Selecting Dynamic Threshold allows the scanner to[...]

User’s Manual Fixed Processing: Used for black-and- white and other high contrast documents. A single level is set to det ermine the black- and-white transition. The threshold is programmable over the entire density range. Fixed Processing sets Contrast to 0. If Fixed Processing is selected, Contrast is not av ailable. Halftone: In addition to th[...]

User’s Manual Error Diffusion Image 4-10[...]

User’s Manual Threshold Used to convert a grayscale image to a bi-tonal image. The value ranges from 0 to 255. A low threshold value produces a lighter image, and can be used to subdue backgrounds and subtle, unneeded information. A high t hreshold value produces a darker image, and can be used to help pick up faint images. Adjust the threshold s[...]

User’s Manual Gray Document Type: Choice: Normal, Photo, Document Three options of document type are provided when you choose Gray as the image type for yo ur scanned document. Choice: Normal, Photo, Document. • Document: Choose Document if your original contains pure text or a mixture of text and graphic since it is an optimal setting for regu[...]

User’s Manual Normal Photo Document (Threshold: 230) Normal Photo Document (Threshold: 230) 4-13[...]

User’s Manual Brightness Adjusts the lightness or darkness of an image. The higher th e value, the brighter the image. Drag the slider to the right or left to increase or decrease the brightness. The range is from –100 to +100. Contrast Adjusts the range between the darkest and the lightest shades in the image. The higher the contrast, th e big[...]

User’s Manual Resolution A good control of the resolution results a good detail of an image that scans. The resolution is measured by dots per inch (dpi). Normally, the greater the dpi number, the higher the resoluti on and the image file size. Be aware that greater resolution takes more time to scan, and more disk space for the scanning image. F[...]

User’s Manual Invert Reverses the brightness and the colors in the image. The default setting is Black on a White background. Reverse mode is White on a Black background. For color images, each pixel will be changed into its complementary color at the command of Invert. Black on White White on Black 4-16[...]

User’s Manual Scan Source Choice: y Auto Document Feeder: Used to scan multiple pages. y Flatbed: Used to scan a single page. For example, pages from newspaper clipping, paper with wrinkles or curls. y Flatbed (book): Used to scan several inside pages from book. y Automatic: Allow the scanner automaticall y set its scan source. If Automatic is se[...]

User’s Manual Select the “Merge Vertically” option to merge the front side and the rear side of a page into one image vertically. If the “Merge Vertically ” option has not been selected, the front side and the rear side of a page will be merged into on e page horizontally. Front Side Rear Side Rear Side Front Side Merge Vertically Merge H[...]

User’s Manual Color Matching The purpose of Color Matching is getting the accurate color. This option uses the default parameters (ICC profile) to adjust the colors of the image. Choice: None, Document, Photo • None: Choose “None” to disable this option. • Document: Choose “Document” if your original contains pure text or a mixture of[...]

User’s Manual 4.2.3 Scanning color images The following options are av ailable for scanning color images. y Brightness y Contrast y Resolution y Invert 4.2.4 Scanning grayscale images The following option s are availa ble for scanning gray images. y Brightness y Contrast y Resolution y Invert 4.2.5 Scanning B&W images The following option s a[...]

User’s Manual 4.2.6 Editing Profiles The Scanner Properties dialog box allows you to change and save your frequently used scan settings into a profile. You can edit these profiles by rena ming or deleti ng them. To add a new profile, 1. Customize your settings. (F or example, change your resolution, image type, cro pping method, scan size, or oth[...]

User’s Manual To load a profile, 1. From the Image tab dialog box, choose your favorable profile from the “Prof iles” dropdown list box. 2. Y our favorable profile will be immediat ely loaded and displayed on Scanner Pr operties dialog box. To delete a profile, 1. From the Image tab dialog box, click “Prof iles” to prompt the Edit Y our P[...]

User’s Manual To rename a profile, 1. From the Image tab dialog box, click “Prof iles” to prompt the Edit Y our Profile dialog box. 2. Choose the profile you want to rename from the dropdown list box and then click the Rename button. 3. Enter new name for the profile. 4. Ch oose “Save” to save the new profile or “Cancel” to quit . Not[...]

User’s Manual 4.3 The Compression Tab The Compression tab allows you to compress your scanned image and choose the level of co mpression. Bi-tonal images are normally compressed using CCITT standard called Group 4 (G4). Color and grayscale images are often compressed using JPEG technology. Move the JPEG Quality slider to the ri ght or left to inc[...]

User’s Manual The Compression tab dialog box 4-25[...]

User’s Manual 4.4 The Color Dropout Tab 4.4.1 Color Dropout Selection Color Dropout tab allows you to dr op either of the red, blue, or green color in your scanned image. If your image contai ns red color watermark or background, choose the R (Red) channel then any red wat ermark or background will be removed. T his feature is used to sharpen you[...]

User’s Manual The Color Dropout dialog box 4-27[...]

User’s Manual 4.4.2 Other Color Dropout Options Advanced Processing provides two options that can adjust your scanned image in th e best optimal result. Filter Threshold This value is us ed to determine the color which will be dropped ou t. A lower value w ill drop more of the selected color out, while a higher value will leav e more of the selec[...]

User’s Manual Remove Blue, Threshold: 20, Background: 255 Remove Blue, Threshold: 20, Background Level: 210 4-29[...]

User’s Manual 4.5 The Paper Tab The Paper tab allows y ou to define values relat ing to image output (i.e., Auto Crop or not, Scan Area, OverScan, Multi-Feed Detection). The Paper tab dialog box 4-30[...]

User’s Manual 4.5.1 Cropping Cropping allows you to capture a portion of the document being scanned. Choice: Automatic, Fixed to Transport, EOP (End of Page) Detection, Automatic Multiple, Relative to Documents. Options Description Automatic Automatic adjusts the cropping window according to different document sizes. Use this option for batches o[...]

User’s Manual Automatic Multiple This option allows you to place various sized documents such as photos, ID Cards, or business cards on the flatbed (if available) and lets yo u create multiple individually cropped images in one scan. Note: To correctly create mu ltiple images, please make sure there is at least 12mm (0.5”) of space between each[...]

User’s Manual Relative to Document: (used for batches of same-sized documents) This option allows you t o cr op different areas on your documents and deliver these imag es in B&W, Gray, or Color separately. For example, there are applications which require you to store the entire docume nt in B&W and a part of the document in color to sav[...]

User’s Manual 3. C lick the Preview t ab to display the Prev iew window. A black rectangular box appears to indicate the max. scan size your have just selected. The Image Selection Box T he selected image A black rectangular box 4. Click the Preview button to view the entire image in low resolution to correctly crop your relative scan area. T he [...]

User’s Manual A Cross Sign T he Relative Area 7. C heck the B&W image from the Image Selection box to scan the entire document. 8. Click the Scan button to start scanning the document in two image types and sizes. (See the result in below .) The entire document in B&W The relative area i n color 4-35[...]

User’s Manual 4.5.2 Other Paper Selection Deskew Use this option to automaticall y deskew a document. Note: If the skew angle is too great, some of the image may be cut off. Scan Area Choose your desired paper size wi th the drop-down list box. Or you may select a custom pa per size by clicking the Scan Area box and then click Add to include in t[...]

User’s Manual Choose “Unknown Length” if you have a batch of long page document with unknown length. Choose “Enter Length” to enter the length and width of yo ur documents or your desi red scan size on documents. This is useful when you have a batch of documents with the same scan size or a batch of same-sized documents. OverScan Overscan[...]

User’s Manual Note: 1 Within the specified t imeout period, if you load y our document to the feeder, the scanner starts scanning automatically. 2 If your scanner has a flatbed option and you place your paper on the flatbed, after the timeout period, you need to click the Scan button on the TWAIN user interface to start scanning. 4-38[...]

User’s Manual 4.6 The Multi-Feed Detection Tab Multi-Feed Detection Multi-Feed Detection allows you to detect ov erlapped document that go through the auto docume nt feeder. Multi-Feed usually occurs due to stapled documents, adhesives on documents, or electro-statically charged document. Note ： The availability of the function varies based on [...]

User’s Manual Additional Length Detection Additional Length Detection al lows you to define the l ength of document being multi-fed. This value indicates the additional length exceeding you r scan area. The Display w indow will show the size of the document as you change the value. A value of 0 indicates no additional length detection. The Additi[...]

User’s Manual By Length (Paper/Object)+Position : When a multi- feed is detected for the first time, the scanner memorizes the length of the document, the length and position of the object (photo or label) attached to the docu ment. When you perform next scanning, this pat tern of multi-feed w ill be bypassed. To use the intelligent mode, 1. Choo[...]

User’s Manual Detection Area This option allows you to specify a multi-f eed detection area. To specify a multi-f eed detection area, 1. Choose Disable from the Intelligent Mode. The Det ection Area will be enabled. 2. Choose Inside the Range or Outside the Range . The detection area will be highlight ed. 3. Drag your mouse pointer on the top or [...]

User’s Manual Detection Area: Outside the Range, Box, Top: 3”, Bottom: 7” 4-43[...]

User’s Manual Ultrasonic Detection Ultrasonic Detection allows you to set overlapped document by detecting paper thickness between documents. Note ： The availability of the fu nction varies based on ty pe of scanner. There are two options available if Multi-Feed is det ected. z Stop Scanning after Multi-Feed If this is selected, the scan ner wi[...]

User’s Manual Clear the Multi-Fed Paper: Auto If this is checked, once mu lti-feed is detected and scann ing operation is stopped, the scan ner will automatically clear the transport of the multi-fed paper. If this is not checked, once multi-feed is detected and scan ning operation is stopped, you need to manually clear the transport of the multi[...]

User’s Manual How to add the sound alarm ： 1. Click the Browse button on the right side of the speaker icon. The Open dialog box appears. 2. Choose your wave file. 3. Click the Open button. The wave file i s added. Units Defines the primary measurement system. Inches, Millimeters, and Pixels are available. 4-46[...]

User’s Manual 4.7 The Preview Tab The Preview t ab allows you to preview (a low-resolut ion scan) your image before final scan. This preview image lets you allocate your scan area. You can choose your scan area by the “Scan Area” drop down list box or placing your cursor on the Display window and dragging it diagonally on the Display window. [...]

User’s Manual 4.8 The Options Tab The Options tab allows you to set foll owing additional i mage processing settings. The Option tab dialog box 4-48[...]

User’s Manual Flip Side Rotation Select “fanfold” to rotate the image of the reverse side to 180 degrees. This is applied to double-sided document which are viewed in portrait are sometime fed into the scanner in landscape or vice versa. Choice: Book, Fanfold. If “Book” is selected, th e image of the reverse side will not be rot ated. The[...]

User’s Manual Rotate Image Choose the rotation angle from the drop down list if you wish to rotate your scanned image. Choice: None, 90°CW(clockwise), 90°CCW(counter clockwise), 180°, Auto based on contents. Auto rotate every even page. Original Rotate 90°CW Rotate 90°CCW Rotate 180° Auto based on contents : When Auto based on contents is s[...]

User’s Manual Blank Page Removal Check if you wish to remove the blank page and move the slider to the left or right to your desired threshold. Edge Fill Check White or Black if you wish to add white or black edge on the border of your scanned image. Enter the value from 0 to 5 mm. Default value is 0. Original Edge Fill: 5mm (Black) 4-51[...]

User’s Manual Image Control Option Check the Mirror box if you wish to reverse the right and left side of your i mage. Original The Mirror Effect 4-52[...]

User’s Manual Punch Hole Remova l You can remove punch holes from the output scanned image when scanning punched document. Note the availabilit y of this feat ure varies depending on your scanner model. Punch holes can not be removed when: • Resolution is set lower th an 150dpi • The hole is near the edge of the document • The holes are not[...]

User’s Manual Despeckle Occasionally small dots or specks appear in the background of a scanned image. Remove unwanted speckles provides a cleaner image for OCR (Optic al Character Recognition) processing, and also helps to reduce compressed file size. Define the speckles (also known as image noise) you wish to remove by specifying its number (si[...]

User’s Manual Note: • The function is currently av ailable for Black and White image only. • To scan at rated speed, it is recommended to set the noise radius up to 10 pixels. 4-55[...]

User’s Manual Background Setting This option allows you to set your scan background. Choice: White Background, Black Background. Note: For a sheet-fed scanner with an auto document feeder, th is option is currently available only in the “ Auto crop” mode. For a scanner with a flatbed pl aten, this option i s available either in the “Auto cr[...]

User’s Manual 4.9 The Setting Tab The Setting tab allows you to set the following settings: The Setting tab dialog box Energy Saving Control Check the Enable Energy Saver box and move the slider to set the amount of time to start the energy saver after your last action. The range is from 1 to 240 minutes. The default value is 15 minutes. Enable P[...]

User’s Manual Cache Mode: None, Page Number, Memory Size . This option allows you t o assign a specified memory size from the available RAM to process the image data. By specifying a smaller memory size, you can free more memory for other applications you are running. By specifying a larger memory size, you can have more memory to process the ima[...]

User’s Manual Show Scanning Progress Check and the scanning progress bar will be shown during scanning. Show Warning Message Check to show the warning messages such as “ADF pad count exceeds 50,000 scans (the number varies based on type of scanner). Please replace the ADF pad and reset the pad count.” Save Settings after Closing Check to save[...]

User’s Manual 4.10 The Imprinter Tab The Imprinter tab allows you to print alphanumeric characters, date, time, document count an d custom message on your scanned image if digital imprinter is selected or at the back of your document if ex ternal imprinter is selected. Choice: External Imprinter, Digital Imprinter. If you have installed an extern[...]

User’s Manual Contents Print All Check Print All to automatically pri nt the text at all pages of your documents. Uncheck Print All to print the text for the first page of your documents only. Custom Enter your custom text to be included in your print string. Counter Show the document count for the scan session. This value is increased sequential[...]

User’s Manual String Orientation Choose your string orientation. Choice: Normal, Rotated, Vertical, Vertical Inversion, 90 degrees CW, 90 degrees CCW Normal Rotated Vertical Vertical Inversion 90 degrees CW 90 degrees CCW If you check the digital impri nter to stamp text on your scann ed image, the illustration of normal and rotated stri ng is sh[...]

User’s Manual Print Position Choose the position you wish to print your string. Move the slider to the right to i ncrease the value or to the left to decrease the value. Range: 0~355mm, default:0 mm The value indicates the height from the bottom of your paper to the last letter of your string. This opt ion is available only if an external imprint[...]

User’s Manual 4.11 The Information Tab The Information tab displays th e following system and scanner information. The Information tab dialog box The “Report” button ： If you encounter any error me ssage while using the scanner, click the Report button. A re port.txt file (C:AVxxx) will be generated. Please send this f ile to the nearest s[...]

User’s Manual 4-65 The “Reset Pad Count” button ： After scanning approximately 50,000 pages (the number varies based on type of scanner) thro ugh the Auto Document Feeder (ADF), the ADF pad may be worn out and you may experience problems with document feedin g. In this case, it is h ighly recommended to replace the ADF pad with a new one. ([...]

User’s Manual 5-1 5. ISIS Interface Operation * Please refer to the preceding ch apter, Scanner Installation, to install ISIS scanner driver. You may start the supplied QuickScan software application to scan vi a the ISIS user interface. The ISIS driver operation method is similar t o the TWAIN’s. Every function on the ISIS inte rface screen is[...]

User’s Manual 6. Using the Buttons The convenient buttons on the scanner is shown as below: Function Display Function Selector The Scan Button The Cancel/ Stop Button T he Power Button 6.1 Installing Button Manager V2 Button Manager V2 provides you an easy way to scan your document and then link the scanne d image to your designated software appl[...]

User’s Manual 6.2 Checking the Button Configurations Before Scanning 1. Button Manager runs from th e system tray. After Button Manager and the scanner driver are properly installed, Button Manager is st arted and the Button icon will be displayed on the system tray at the bottom right corner of your computer screen. 2. Left-click the Button Mana[...]

User’s Manual 3. The Button Panel shows the first five scanning buttons. Right-click the button (functi on) you wish to check. The Button Properties window appears. If you wish to change the setting, use thi s window to reset the setting for t he file format, dest ination application, or other scan settings. 4. Click the OK button to leave the wi[...]

User’s Manual 6-4 6.3 Scanning From One Touch of the Buttons 1. Adjust the paper guide for the width of paper and load the document with their tops into the automatic document feeder. 2. Check the number on LCD screen on the scanner to ensure if you are selecting the proper scan settings and destination application. (For exampl e, if you wish to [...]

User’s Manual 7. Maintenance 7.1 Cleaning the Glass The procedures 1. Use a clean and lint-free cloth wet with isopropyl alcoh ol. (95%) 2. Open the document cover as shown in Figure 7-1. Wipe the document glass. 3. Close the document cover. Your scanner is now ready for use. Figure 7-1 The cleaning area 7-1[...]

User’s Manual 7.2 Cleaning the ADF The scanner parts may be cont aminated with ink, toner particles or paper coatings. As a result, the scanner needs to be cleaned occasionally particul arly in the following cases: 1. Documents do not feed smoothly or easily; 2. Several documents feed at one time. The cleaning procedures 1. Wet a soft lint-f ree [...]

User’s Manual ADF Roller ADF Pad 7-3[...]

User’s Manual 7.3 Replacing the ADF detachable pad module After scanning approximately 50,000 pages through the ADF, the pad spring may be worn out and you may experience problems with document feedin g. In this case, it is h ighly recommended to replace the pad module with a new one. For ordering the pad module, please consult your nearest deale[...]

User’s Manual 7.4 Replacing the ADF roller After scanning approximately 200,000 pages through the ADF, the ADF roller may be worn out and you may experience problems with document feedin g. In this case, it is h ighly recommended to replace the rolle r with a new one. Please follow these steps to replace an d install the ADF roller. 1. Open the A[...]

User’s Manual 3. Hold the roller and slightly move it forward t o detach the roller. 7-6[...]

User’s Manual 7-7 Assembling Procedure To install the ADF roller, please follow these steps. 1. Insert one end of the ADF rolle r to its slots and then the other end. 2. Press down the tab. If properly installed, a snap-in sound could be heard.[...]

User’s Manual 8. Troubleshooting 8.1 Removing the abnormal lines on your scanned image If your scanned image is show n with abnormal lines on it, it is probably caused by the dust or toner particle on the strip of document glass. To remove the dust or toner particle, 1. Dip a soft clean cl oth with isopropyl alcohol (95%). 2. Wipe the strip of do[...]

User’s Manual 8.2 Clearing a Paper Jam In the event of a paper jam, follow the procedures below to remove the paper: 1. Gently open the ADF front cover to the left. 2. Carefully pull the paper out of the ADF unit. 3. Close the ADF front cover. The product is now ready to use. 8-2[...]

User’s Manual 8.3 Questions and Answers Question: When the scanner is powered on, it makes noises and won’t stand ready. Answer: There are two possibilities: 1) You might fail to push the scanner shipping lock to its “ unlocked” position. If this is the case, pull the scanner status switch to its “unlocke d” position first. 2) The scann[...]

User’s Manual Question: The scanner works well except for the line art image. The lines in the image seem to be much thicker than the original one. Answer: Increase the Brightness or adjust the Threshold setting to improve line art im age. Question: Paper becomes jamme d during scanning. Answer: 1.Open the ADF unit. 2.Pull out the jammed paper ca[...]

User’s Manual 8.4 Technical Service Before contact Avision, please prepare the following information:  Scanner serial & revi sion number (located on the bottom of the scanner);  Hardware configuration (e.g., yo ur host CPU type, RAM size, free disk space, display card, interface card);  The name and version of your sca nning software[...]

User’s Manual 8-6 China Area Hongcai Technology Limited 7A,No.1010,kaixuan Road,Shanghai 200052 P.R.C. TEL : +86-21-62816680 FAX : +86-21-62818856 E-MAIL : sales@avision.net.cn Web Site: http://www.avision.com.cn Europe Area Avision Europe GmbH Bischofstr. 101 D-47809 Krefeld Germany TEL: +49-2151-56981-40 FAX: +49-2151-56981-42 E-MAIL: info@avis[...]

User’s Manual 9. Specifications All specifications are subject to change without notice. Model Number DT-1106B(Simplex ) DT-1110B(Duplex) Scanner Type Flatbed & ADF Scanning Mode Color/Grey/Black & White Optical Resolution 600 dpi Technology Contact Image Sensor Light Source LED ADF Max. Scan Size 11.7” x 16.5” (297 x 420 mm) Power Co[...]

User’s Manual Index Custom Font Normal, Fixed Width, 4-61 Ａ Ｄ Additional Length Detection, 4- 40 default settings, 4-3 ADF roller, 7-5 Deskew , 4-36 Auto Color Detection Despeckle , 4-54 sensitivit y, 4-7 Noise Number, Noise Radius, 4-54 Ｂ Document Type Normal, Photo, Document, 4-12 B&W, 4-6 Background Level , 4-28 Dynamic Threshold Bac[...]

User’s Manual b Ｉ Intelligent Mode (Skip Multi-feeds) Disable, By Length(Paper/Object), By Position, By Length(Paper/Object)+Positi on, 4-40 Invert , 4-16 Ｊ JPEG, 4-24 Ｌ lock switch, 2-2 Ｍ Mirror, 4-52 Multi-Feed Detection , 4-39 Ｏ OverScan , 4-37 Ｐ Print All, 4- 61 Print Position , 4-63 Punch Hole Removal , 4-53 Ｒ Reset Pad Count ,[...]