Baumatic BFD64SS Bedienungsanleitung

BFD64SS 60 cm electronic dishwasher[...]

USER MANUAL FOR YOUR BAUMATIC BFD64SS 60 cm electronic dishwasher. NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future reference; for you or any pers on [...]

3 Contents E nvironmental note 4 Important safety information 5 – 7 S p e c i f i c a t i o n s 8 Product dimensions 8 Product specifications 8 Energy efficiency details 9 E l e c t r i c a l d e t a i l s 9 Description of the appliance 9 C o n t r o l p a n e l 1 0 D i s p l a y w i n d o w 1 0 U s i n g y o u r d i s h w a s h e r 11 Before fir[...]

ENVIRONMENTAL NOTE Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertake n by a competent person. Disable the door lock to make sure that children cannot get stuck inside the app[...]

IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the info rmation contained in this booklet, please contact the Baumatic Technical Department. General Safety o Repairs to your applia[...]

6 o Care should be taken not to trap the power supply cable underneath the appliance whilst installing it. o No attempt should be made to al ter or modify the specifications of this appliance. In daily use o This appliance is only designed to wash normal domestic washloads. If you use your dishwa sher in any other way or it is incorrectly used, the[...]

7 Child Safety o Your dishwasher should only be used by adults. You should not allow children in the area of the machine unsupervised. You should not let them touch the cont rols or play with the appliance. o It could be possible for a child or pet to gain access to the dishwasher if the door is left open. Therefore please check the inside of the a[...]

Specifications Product dimensions: Height: 850 mm Width: 600 mm Depth: 600 mm Product specifications o 14 Place settings o 7 functions: Normal Intensive Economy Rinse Glass 3 in 1 Soak o 4 Wash temperatures: 40°C, 45°C, 50°C, 60°C o Electronic aqua stop o Turbo drying o LED display o Delay timer o Indicator of salt and rinse aid o Half load fun[...]

Energy efficiency details Energy efficiency class: A Washing performance class: A Drying performance class: A Electrical details Rated voltage: 230 Vac 50 Hz Supply connection: 13 A (double pole switched fused outlet with 3 m m c o n t a c t g a p ) Description of the appliance 1) Upper basket 2) Spray arms 3) Lower basket 4) Water softener 5) Main[...]

Control panel Display window The display window can show the following information:- o Salt required o 3 in 1 wash program selected o Rinse aid required o 1/2 load wash program selected o Wash program time remaining o Delay start time set o Intensive wash program selected o Normal wash program selected o Economy wash program selected o Rinse wash p[...]

Using your dishwasher Before first use o Install the appliance as per the installation instructions contained within this booklet. o Fill the water softener with 1 litre of tap water and then fill with specialist dishwasher salt. After this you should set the water softener level. o Fill the rinse aid dispenser and th en set the rinse aid doseage. [...]

o The salt required warning light will go out approximately 2-6 hours after you have filled the salt container with salt. When the salt required warning light come s on again, then you should follow the filling with dishwasher salt procedure again. IMPORTANT: you do not need to pour 1 litre of water into the container when you subsequently fill t h[...]

Filling with rinse aid The rinse aid is released during the final rinse and it helps to prevent water from forming droplets on your dishes. These droplets will lead to spots and streaks being left on items after the wash program has completed. o Your dishwasher is designed to utilise liquid rinse aids. o The rinse aid dispenser is locate d inside t[...]

o You should continue to adjust the rinse aid level upwards until you get no water spots. o If you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. Turn the arrow clockwise an d lower the setting to the next number. Filling with dishwasher detergent The detergent dispen[...]

o To access the rinse aid dispenser, you should turn the cap anticlockwise and it will pop out of the hole. o Turn the arrow clockwise until it moves past the number 1, this deactivates the rinse aid dispenser. o IMPORTANT: There is no need to put rinse aid or dishwasher salt in the appliance if you are using 3 in 1 detergent tablets. You must ONLY[...]

Adjusting the upper basket Your dishwasher has an adjustable upper basket which you can alter to the most suitable position for the items you are going to wash in the upper basket. The height of the upper basket can be adjusted by pulling the handle on either side of the basket up wards until it clips into place. Position 1 (u pper position) o For [...]

IMPORTANT: Care should be take n to make sure that the spray arms can move freely when items have been loaded into the baskets. IMPORTANT: Care should be taken when placing long stemmed glassware, such as champagne glasses in the upper basket. If they are no t positioned correctly, then there is a risk that they ma y topple over when the upper bask[...]

o For ease of loading, it is possible to split apart the outer section of the cutlery basket. However this outer section should not be placed individually into the cutlery basket, it should always be attached to the main basket. IMPORTANT: Do not allow items of cutlery to fall through the bottom of the cutlery basket, as this may cause damage to th[...]

The following items are NOT suita ble for washing inside a dishwasher:- o Cutlery with a handle of mother-o f-pearl, wood, horn or china. o Plastic items that are not resistant to heat. o Cutlery that consists of glued part s that are not resistant to heat. o Cutlery items or crockery that are bonded. o Copper or pewter items. o Lead crystal glass.[...]

Program table * P3 Normal is the testing program for EN 50242. Setting a wash program Make sure that the before first use section has been followed. o Check whether the appliance needs ri nse aid or salt adding to it. o Pull out the top and bottom baskets, then load them in accordance with the loading instructions. o Push the top and bottom baskets[...]

21 o Turn the appliance on by using the ON/OFF button. o Press the program selection bu tton to choose an appropriate wash program for the load that you are washing. The number of the wash program that you have selected will appear in the program indicator. o Select any program options that you want to use (e.g. delay start or half load). o Close t[...]

The 3 in 1 wash program IMPORTANT: Before using the 3 in 1 wash program, make sure that you have followed the “3 in 1 tablets before first use” section. Make sure that the water softener has not got any salt in it. If there is still salt in it, then turn the water softener to its lowest setting. Make sure that the rinse aid dispenser has been s[...]

Setting a delay start It is possible to delay the start of the wash program for up to a maximum of 24 hours. o Check whether the appliance needs ri nse aid or salt adding to it. o Pull out the top and bottom baskets, then load them in accordance with the loading instructions. o Push the top and bottom baskets fully back into position. o Add deterge[...]

o Add detergent o Turn the appliance on by using the ON/OFF button. o Press the program selection bu tton to choose an appropriate wash program for the load that you are washing. The number of the wash program that you have selected will appear in the program indicator. o Press the half load button, the half load light will come on. o Close the doo[...]

Coarse filter- Larger items such as pieces of bone or glass, which could clog the drain are trapped in this filter. Fine filter- This filter holds soil and food residue in the sump area and prevents it from being redeposited on the dishes during a wash cycle. IMPORTANT: Whilst the filtering system is efficient, your dishwasher is not a waste dispos[...]

Cleaning the spray arms The spray arms should be cleaned regularly, to prevent hard water deposits from clogging the spray arm jets and bearings. o To remove the spray arm, unscrew the nut and take out the washer that sits on top of the spray arm. o Gently pull upwards to remove the spray arm. o Wash the spray arm in warm, so apy water and use a so[...]

27 Error code failure system If your appliance senses that it is not operating correctly, then an error code may appear in the display window. The following error codes can possibl y be remedied by the customer and the steps outlined below should be followed. BEFORE COMPLETING ANY MAINTAINEANCE ON THE APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR [...]

9 LEAVE THE APPLIANCE SWITCH ED OFF FOR 24 HOURS AND THEN SWITCH IT BACK ON , IF E4 REAPPEARS THEN CONTACT THE BAUMATIC SERVICE DEPARTMENT. E5 o Switch cannot shut off automati cally- program not finishing its cycle. 9 Low voltage or power switch failure. 9 Call Baumatic Service Department. E6 o Open circuit 9 Thermistor 9 Call Baumatic Service Dep[...]

29 General troubleshooting PROBLEM POSSIBLE CAUSES WHAT TO DO Dishwasher doesn’t run Fuse blown or the circuit breaker has tripped Power supply is not switched on Water pressure is low Replace the fuse or reset the ci rcuit breaker. Remove any other appliances that are sharing the same circuit with the di shwasher. Make sure that the dishwasher i[...]

30 Dishes and pans are not clean Improper progr am Improper loading Select a more intense wash program. Make sure that the spray arms and the detergent dispenser are not being impeded by large dishes. Spots and filmin g on glasses and pans Extremely hard water Low inlet temperature Improper loading Improper detergent Incorrect salt/rinse aid levels[...]

Installation IMPORTANT: THIS INSTALLATION MUST BE COMPLETED BY A SUITAB LY QUALIFIED PERSON. BAUMATIC ONLY SANCTION THE INSTALLATION GIVEN IN THIS INSTRUCTION MANUAL. YOU SHOULD DISPOSE OF A LL PACKAGING IN AN ENVIRONMENTALLY FRIENDLY MANNER. Positioning and leve ling the appliance 9 Remove all packaging from th e outside and inside of the dishwash[...]

IMPORTANT: When the dishwasher is positioned in the location where it will be used. Make sure that all four feet are resting firmly on the floor, by pressing down on each corner and checking that the appliance stands still. Connecting to the mains water supply IMPORTANT: Do not connect the app liance to your mains water supply using an old or an ex[...]

Water outlet 9 Secure the drain hose, so that it cannot move whilst the dishwasher is in use. 9 Place the end of the drain hose on your drain pipe. Push it a short way down into your drain pipe. 9 IMPORTANT: Do not insert the drain ho se too deeply into the water pipe, as this may cause siphoning. 9 NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL [...]

34 9 Consult the rating plate, located on the right hand side of the on 9 DO NOT REMOVE THE RATING PLATE AS THE 9 The moulded plug that is supplied with the appliance must be 9 Broken or damaged power leads must only be replaced by a be 9 Power lead type – H 0 V V – F 3G 1,5. 9 IMPORTANT: We do not recommend th at this appliance is drop down do[...]

35 gs, gdom ales Telephone United Kingdom Baumatic Ltd., Baumatic Buildin 6 Bennet Road, Reading, Berkshire RG2 0QX United Kin S (0118) 933 6900 Sales Fax (0118) 931 0035 e Service Telephon (0118) 933 6911 Service Fax (0118) 986 9124 e Spares Telephon Telephone (01235) 4372 44 Technical Advice -mail: (0118) 933 6933 E umatic.co.uk uk ebsite: sales@[...]

36[...]