Billion BiPAC 7404V Series Bedienungsanleitung

V ersion Release 5.07 Last Revision Date: 08-15-2006 BiP AC 7404V Series V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router User ’ s Manual[...]

T able of Contents i T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s CHAPTER 1: INTRODUCTION ............................................................................................................. 4 INTRODUCTION TO YOUR ROUTER ................................................................................................. 4 FEA T[...]

T able of Contents iii W AN - W ide Ar ea Network.................................................................................................................. 41 ISP .................................................................................................................................................. 41 DNS .........................[...]

T able of Contents iii PROBLEMS WITH THE LAN INTERF ACE ..................................................................................... 153 APPENDIX A: PRODUCT SUPPOR T AND CONT ACT INFORMA TION .................................... 154[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 1: Introduction 4 Chapter 1: Introduction Introduction to your Router Welcome to the V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router . The router is an “all-in-one” V oIP ADSL router , combining an ADSL modem, ADSL router , Ethernet network switch and 2 ports for V oice over IP functionalitie[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 1: Introduction 5 directly for auto detection. Multi-Protocol to Establish a Connection It supports PPPoA (RF C 2364 - PPP over A TM Adaptation Layer 5), RFC 1483 encap sulation over A TM (bridged or routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to est ablish a connection with the I[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 1: Introduction 6 Rich Packet Filtering Not only filters the packe t based on IP address, but also base d on Port numbers. It will filter packet s from and to the Internet, and also provides a higher level of security control. Dynamic Host Configuration Protocol (DHCP) Client and Server In the [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 2: Installing the router 7 Chapter 2: Inst alling the Router Import ant note for using this router Package Content s V oIP/(802.1 1g) ADSL2+ (VPN) Firewall Router CD-ROM cont aining the online manual RJ-1 1 ADSL/telephone Cable Ethernet (CA T -5 LAN) Cable Console tool kit AC-DC power adapter ([...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 2: Installing the router 8 The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready . 3 – 6 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 7 WLA[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 2: Installing the router 9 The Ethernet Port # 4 can be used as a console port. Y ou need a special console tool which already includes in the p ackage to connect with LAN port 4 and PC’ s RS-232 port (9-pin serial port). The Rear Port s Port M eaning 1 Power Switch Power ON/OFF switch 2 PWR [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 2: Installing the router 10 7 ADSL Connect the supplied RJ-1 1 (“telephone”) cable to this port when connecting to the ADSL/telephone network. 8 Antenna (Wireless Router only) Connect the detachable antenna to t his port. Cabling One of the most common causes of problems is bad cabling or A[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 11 Any TCP/IP cap able workstation can be used to communicate w ith or through the router . T o configure other types of workstations, please consult the manufacturer ’ s documentation. Chapter 3: Basic Inst allation The router can be configured with your web browser . A[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 12 Connecting Y our Router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone ( ADSL ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit. 4. Connect an RJ1 1 cable to V oIP port when con[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 13 Configuring PCs in Windows in Window XP 1. Go to St art / Control Panel (in Classic View). I n the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection . (See Figure 3.1) 3. In the LAN Area Connection S tatus window , click Properties [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 14 Configuring PCs in Windows 2000 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and Dial-up Connections . 2. Double-click Local Area (“LAN”) Connection . (See Figure 3.5) 3. In the LAN Area Connection S tatus window , click Pr[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 15 Configuring PC in Windows 95/98/ME 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Comp atible , or the name of any Network Interface Card (NIC) in your PC. ( See F[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 16 Configuring PC in Windows NT4.0 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . ( See Figure 3.12) 3. Select the Obt ain an IP address from a DHCP serv[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 17 Factory Default Settings Before configuring your , you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ admin ” respectiv ely . Device LAN IP [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 18 Information from your ISP Before configuring this device, you have to check wi th your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obtain an IP Address Automatically , S t atic IP (Fixed IP Address) and PPPoE. Gather the in[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 3: Basic Installation 19 Configuring with your Web Browser Open your web browser , enter the IP address of your router , which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear . The def ault username and password are “admin” and “admin[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 20 Chapter 4: Configuration At the configuration homepage, the lef t navigati on pane where bookmarks are provided links you directly to the desired setup page, includin g: St atus - ARP T able - Wireless Association - Routing T able - DHCP T able - PPTP S tatus - IPSec S tatus[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 21 S t atus ARP T able This section displays the router’s ARP (Address Resolution Protocol) T able, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the MAC address of the network interface of your PC[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 22 Gateway/Interface: The IP address of the gateway or existing interface that this route will use. Cost: The number of hop s counted as the cost of the route. RIP Routing T able Destination: The IP address of the destination network. Netmask: The destination Netmask address. G[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 23 MAC Address: The MAC Address that you wan t to assign the fixed IP address. Maximum Lease Time: The maximum lease time interval you allow to clients. PPTP S tatus (Only the 7404VG O has VPN features) This shows details of your configure d PPTP VPN Connections. Name: The name[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 24 L2TP S tatus (Only the 7404VGO has VPN features) This shows details of your configure d L2TP VPN Connections. Name: The name you assigned to the p articular L2TP connection in your VPN configuration. T ype: The type of connection (dial-in/dial-out). Enable: Whether the conne[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 25 Event Log This page displays the router’s Event Log entries. Major events are logged to this window , such as when the router ’s ADSL connection is disconnected, as well as Firewall events when you have enabled Intrusion or Blocking Logging in the Configuration – Firew[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 26 NA T Sessions This section lists all curr ent NA T sessions between inte rface of types external (W AN) and internal (LAN). Diagnostic It tests the connection to computer(s) which is connected to LAN ports and also the W AN Internet connection. If PING www.google. com is sho[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 27 UPnP Portmap The section list s all port-mapping established using UPnP (Universal Plug and Play . See Advanced section of this manual for more det ails on UPnP and the router ’s UPnP configuration options.[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 28 Quick S t art For detailed instruction s on configuring your W AN settings, please see the WA N section of this manual. Usually , the only details you will need for the Quick S tart wizard to get you online are your login (of ten in the form of username@ispname ), your p ass[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 29 Select the desired option from the list and click Apply to return to the Quick S tart interface to continue configuring your ISP connection. Pl ease note that the contents of this list will vary , depending on what is supported by your ISP .[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 30 Configuration When you click this item, you get following sub-items to configure the ADSL router . - LAN, W an, System, Firewall, VPN, V oIP , QoS, Virtual Server , T ime Schedule and Advanced These functions are described below in the following sections. LAN - Local Area Ne[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 31 Ethernet Primary IP Address IP Address: The default IP on this router . SubNetmask: The default subnet mask on this router . RIP: RIP v1, RIP v2, and RIP v2 Mult icast. Check to enable RIP function. IP Alias This function support s to create multiple virtual IP interfaces on[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 32 Ethernet Client Filter The Ethernet Client Filter supports up to 16 Ethernet network machines that help s you to manage your network control to accept traf fic from specific authorized machines or can restrict unwanted machine(s) to access your LAN. There are no pre-define E[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 33 Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router . Y ou can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to insert to the Ethernet Client Filter table. The [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 34 Wireless (Wireless Ro uter only) Parameters WLAN Service: Default setting is set to Enable . If you do not have any wireless, both 802.1 1g and 802.1 1b, device in your network, select Disable. Mode: The default setting is 802.1 1b+g (Mixed mode). If you do not know or have [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 35 TX PowerLevel: It is function that enhances the wireless tran smitting signal strength. User may adjust this power level from minimum 0 up to maximum 255. Note: The Power Level maybe different in each a ccess netwo rk user premi ses environment and cho ose the most suitable [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 36 Wireless Security (W ireless Router only) Y ou can disable or enable with WP A or WEP for protecting w ireless network. The default mode of wireless security is disabled . WP A-PSK (TKIP) / WP A-PSK (AES) Pre-Shared Key WP A Algori thms: There are two types of the WP A-PSK, [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 37 WEP WEP Encryption: T o prevent unauthorized wireless stations from accessing dat a transmitted over the network, the router offers highly secure dat a encryption, known as WEP . If you req uire high security for transmissions, there are two alternatives to select from: WEP [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 38 Wireless Client / MAC Address Filter (Wireless Router only) The MAC Address support s up to 16 wireless n etwork machines and helps you to manage your network control to accept traffic from specific authorized mach ines or to restrict unwanted ma chine(s) to access your LAN.[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 39 Port Settin g This section allows you to configure the settings for the r outer ’s Ethernet ports to solve some of the compatibility problems that may be encountered while connecting to the I nternet, as well allowing users to tweak the performance of their network. Port #[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 40 DHCP Server Y ou can disable or enable the DHCP (Dynamic Host C onfiguration Protocol) server or enable the router ’ s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP addresses to PCs on your network if they are configured to obtain IP a[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 41 W AN - Wide Area Network W AN refers to your Wi de Area Network connection, i.e. your router ’s connection to your ISP and the Internet. Here are the items within the W AN section: ISP , DNS and ADSL . ISP The factory default is PPPoE. If your ISP uses this access protocol[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 42 RFC 1483 Routed Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to acce [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 43 RFC 1483 Bridged Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . Encap sulation method: Select the encapsulation format, this is provided by your IS[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 44 PPPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to acce ss the [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 45  Det ail: Y ou can define the destination port and p acket type (TCP/UDP) without checking by timer . It allows you to set which outgoing traf fic will not trigger and reset the idle timer . RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function. MTU: Max[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 46 IPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to acce ss the I[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 47 PPPoE Connections Description: User-definable name for this connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to acce ss the Intern[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 48  Connect on Dema nd: If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempt s to access the Internet). Idle Timeout: Auto-disconnect the broadband firewall gateway when there is [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 49 PPPoE with Pass-through Connections PPPoE with pass-through adapt s the following method: PPPoE Routed mode + 1483 Bridge Mode. With pure PPPoE connection, the router can get one W AN address to the router . With the PPPoE and PPPoE pass-through, concurrently , it allows use[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 50 Authentication Protocol: Default is Chap(Auto). Y our ISP will advise you whether to use Chap or Pap. Connection:  Always on: If you want the r outer to est ablish a PPPoE session when starting up and to automatically re-establish the PPPoE session when disconnected by th[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 51 DNS A Domain Name System (DNS) contains a mapping t able for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www .helloworld.com and an IP address. An IP address is a 32-bit number in the form of xxx.xxx.xxx[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 52 ADSL Connect Mode: This mode will automatically detect your AD SL line code, ADSL2+, ADSL2, G .dmt, G .lite, T1.413, AnnexM2 and AnnexM2+. But in some area, multimode cannot detect the ADSL line code well. If it is the case, please adjust the ADSL line code to G .dmt or T1.4[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 53 Advanced Options ADSL Parameters help to interpret your ADSL line st atistics. SNR Margin: It is known as Signal to Noise Ration Margin. It is the relative of DSL strength to Noise ratio. This margin is measured in decibels (dB). Higher the dB figures better the DSL strength[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 54 System Here are the items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network T ime Protocol (SNTP) to get the c[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 55 Remote Access T o temporarily permit remote administration of the rout er (i.e. from out side your LAN), select a time period the router will permit remote access for and click Enable. Y ou may change other configuration options for the web administration interface using Dev[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 56 DO NOT power down the router or interrupt the firmw are upgrading while it is still in process. Improper operation could damage the router . Firmware Upgrade Y our router ’ s “firmware” is the softw are that allows it to operate and provides all it s functionality . Th[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 57 Backup / Restore These functions allow you to save and backup your router ’s current settings to a file on your PC, or to restore a previously saved backup. This is us eful if you wish to experiment with different settings, knowing that you have a backup handy in the case [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 58 Rest art Ro uter Click Resta rt with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, af ter a firmware upgrade or if you have saved an incorrect conf[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 59 User Management In order to prevent unauthorized access to your router ’s configuration interface, it requires all users to login with a password. Y ou can set up multiple user accounts, each with their own password. Y ou are able to Edit existing users and Create new user[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 60 When using Virtual Servers your PCs will be exposed to the degree specified in your V irtual Server settings provided the ports specified are opened in your firewall packet filter settings. Firewall and Access Control Y our router includes a full SPI (S tateful Packet Inspec[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 61 General Settings Y ou can choose not to enable F irewall and still able to access to URL Filter and IM/P2P Blocking or enable the Firewall using preset filter rules and modify the port filter rule s as required. The Packet Filter is used to filter packet s based-on Applicati[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 62 Packet Filter This function is only available when the Firewall is enabled and one of th ese four security levels is chosen (All blocked, High, Medium and Low). The preset port filter rules in the Packet Filter must modify accordingly to the level of Firewall, which is selec[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 63 Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See T able 1. Note: Firewall – All Blocked/User-defined, you must defin e and create the po rt filter rules yourself. No predefined rule is being pr[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 64 MSN (7001) UDP(17) 7001 7001 YES YES N/A N/A N/A N/A MSN VEDIO (9000) TCP(6) 9000 9000 NO YES N/A N/A N/A N/A Inbound: Internet to LAN ; Outbound: LAN to Internet. YES: Allowed ; NO: Blocked ; N/A: Not Applicable[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 65 Packet Filter – Add TCP/UDP Filter Rule Name: Users-define description to identify this entry or click to select existing predefined rules. The maximum name length is 32 characters. Time Schedule: It is self-defined time period. Y ou may specify a time schedule for your pr[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 66 Packet Filter – Add Raw IP Filter Rule Name: Users-define description to identify this entry or click to select existing predefined rules. Time Schedule: It is self-defined time period. Y ou may specify a time schedule for your prioritization policy . For setup and detail,[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 67 Example: Configuring your firewall to allow for a publicly accessible web server on your LAN The predefined port filter rule for HTTP (TCP port 80) is the same no matter whether the firewall is set to a high, medium or low security level. T o setup a web server located on th[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 68 Configuring Packet Filter: 1. Click Port Filters . Y ou will then be presented with the predefined port filter rules scre en (in this case for the low security level), shown below: Note: You may click Edit the predefined rule instead of De lete it. This is an example to show[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 69 5. The new port filter rule for HTTP is shown below: 6. Configure your V irtual Server (“port forwarding”) settings so that incoming HTTP request s on port 80 will be forwarded to the PC running your web server: Note: For how to configure the HT TP in Virtual Server, go [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 70 Intrusion Detection The router ’s Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attempts from the Internet. If the IDS function of the firewall is enabled, inbound packet s are filtered and blocked depending on whether they are detected as[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 71 T able 2: Hacker attack ty pes r ecognized by the IDS Intrusion Name Detect Parameter Blacklist T ype of Block Duration Drop Packet Show Log Ascend Kill Ascend Kill data Src IP DoS Y es Y es WinNuke TCP Port 135, 137~139, Flag: URG Src IP DoS Y es Y es Smurf ICMP type 8 Des [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 72 URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www .abcde.com or http://www .example.com ) filter rules allow you to prevent users on your network from accessing p articular websites by their URL. There are no pre-define d URL filter rules[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 73 dropped. 3. If the packet does not match either of the above two items, it is sent to the remote web server . 4. Please be note that the completed URL, “www” + domain name shall be specified. For example to block traffic to www .goo gle.com.au , enter “ www .google ”[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 74 IM / P2P Blocking IM, short for Instant Message, is required to use client program software that allows users to communicate, in exchanging text message, with other IM users in real time over the Internet . A P2P application, known as Peer-to-peer , is group of computer user[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 75 Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the St atus – Event Log after enabling.[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 76 VPN - Virtual Private Networks (BiP AC 7404VGO Only) Virtual Private Networks is ways to e s t ablish secured communication tunnels to an organization’s network via the Internet. Y our router support s three main types of VPN (Virtual Private Network), PPTP , IPSec and L2T[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 77 PPTP Connection - Rem ote Access Connection Name: User-defined name for the connection (e.g. “connection to of fice”). T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In operat[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 78 Example: Configuring a Remote Access PPTP VPN Dial-out Connection A company’ s office establishes a PPTP VPN connection with a file server located at a separate location. The router is installed in the office, connected to a couple of PCs and Servers. Dial-out[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 79 Configuring the PPTP VPN in the Office Y ou can either input the IP address (69.1.121.33 in this case) or hostname to reach the server . Item Function Description 1 Connection Name VPN_PPTP Given name of PPTP connection Dial out Check Dial out 2 Server IP Address (or Hostnam[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 80 PPTP Connection - LAN t o LAN Connection Name: User-define description of the connection. T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In operates as a VPN server .  When con[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 81 Example: Configuring a PPTP LAN-to-LAN VPN Connection The branch office e s t ablishes a PPTP VPN tunnel with head office to connect two private networks over the Internet. The routers are inst alled in the head office and branch office accordingly . Both office LAN networks[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 82 Configuring PPTP VPN in the Head Office The IP address 192.168.1.201 will b e assigned to the router located in the branch office. Please make sure this IP is not used in the head o ffice LAN. Item Function Description 1 Connection Name HeadOffice Given a name of PPTP connec[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 83 Configuring PPTP VPN in the Branch Office The IP address 69.1.121.30 is the Public IP address of the router located in head office. If you registered the DDNS (please refer to the DDNS section of this manual), you can also use the domain name instead of the IP address to rea[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 84 IPSec (IP Security Protocol) Click Create to create a new IPSec VPN connection account. After you have created the IPSec connection, account information will be displayed. (See example above).  Enable / Disable: This function activates or deactivates the IPSec connection.[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 85 IPSec VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to of fice”). Local Network: Set the IP address, subnet or address range of the local network.  Single Address: The IP address of the local host.  Subnet: The subnet of the[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 86  3DES: S t an ds for T riple Data Encryption S tandard, it uses 168 (56*3) bits as an encryption method.  AES: S tands for Advanced Encryption S tandards, you can use 128, 192 or 256 bits as encryption method. Perfect Forward Secrecy: Choose whether to enable PFS using[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 87 Advanced Option This function is only available after completed creating an IPSec account. Click Advanced Option to change the following settings: IKE (Internet key Exchange) Mode: Select IKE mode to Main mode or Aggressive mode. This IKE provides secured key generation and [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 88  AES: S tands for Advanced Encryption S tandards, you can use 128, 192 or 256 b i t s as encryption method. Diffie-Hellman Group: It is a public-key cryptography protocol that allows two parties to establish a shared secret over an unsecured communication channel (i.e. ov[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 89 Example: Configuring a IPSec LAN-to-LAN VPN Connection T able 3: Network Configur ation and Security Plan Branch Office Head Office Local Network ID 192.168.0.0/24 192.168.1.0/24 Local Router IP 69.1.121.30 69.1.121.3 Remote Network ID 192.168.1.0/ 24 192.168.0.0/24 Remote R[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 90 Configuring IPSec VPN in the Head Office Item Function Description 1 Connection Name IPSec_HeadOffice Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head office network 3 Secure Gateway Address (or Hostname) 6[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 91 Configuring IPSec VPN in the Branch Office Item Function Description 1 Connection Name IPSec_Branch Office Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.0.0 2 Netmask 255.255.255.0 Branch office network 3 Secure Gateway Address (or Host[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 92 Example: Configuring a IPSec Host-to-LAN VPN Connection[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 93 Configuring IPSec VPN in the Office Item Function Description 1 Connection Name IPSec Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head office network 3 Secure Gateway Address (or Hostname) 69.121.1.30 IP ad[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 94 L2TP (Layer T wo T unneling Protocol) T wo types of L2TP VPN are supported Remote Access and LAN-to-LAN (please refer below for more information.). Click Create to create a new VPN connection account. After you have created L2TP connection, account status will be displayed. [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 95 L2TP Connection - Remote Access L2TP VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to of fice”). T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), c[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 96 the VPN tunnel to the Internet; therefore, active the function may degrade the Internet performance. Click Apply after changing settings. L2TP over IPSec (L2TP/IPSec) VPN Connection IPSec: Enable for enhancing your L2TP VPN security . Authentication: Authentication establish[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 97 Example: Configuring a L2TP VPN - Remote Access Dial-in Connection A remote worker establishes a L2TP VPN connection with the head office using Micro soft's VPN Adapter (included with Windows XP/2000/ME, etc.). The router is installed in the head office, connected to a [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 98 Configuring L2TP VPN in the Office The input IP address 19 2.168.1.200 will be assigned to the remote worker . Please make sure this IP is not used in the Office LAN. Item Function Description 1 Connection Name VPN_L2TP Given a name of L2TP connection Dial in Check Dial in 2[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 99 Example: Configuring a Remote Access L2TP VPN Dial-out Connection A company’ s office establishes a L2TP VPN connection with a file server located at a sep arate location. The router is installed in the office, connected to a couple of PCs and Servers. Dial-out[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 100 Configuring the L2TP VPN in the Office Item Function Description 1 Connection Name VPN_L2TP Given name of L2TP connection Dial out Check Dial out 2 Server IP Address (or Hostname) 69.121.1.33 An Dialed server IP Username username 3 Password 123456 A given username & pas[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 101 Example: Configuring your Router to Dial-in to the Server Currently , Microsoft Windows operation system does not support L2TP incoming service. Additional sof tware ma y be required to set up your L2TP incoming service.[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 102 L2TP Connection - LAN to LAN L2TP VPN Connection Connection Name: User-define description of the connection. T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In operates as a VPN s[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 103 predetermined period of time. 0 means this connection is always on. Click Apply after changing settings. L2TP over IPSec (L2TP/IPSec) VPN Connection IPSec: Enable for enhancing your L2TP VPN security . Authentication: Authentication establishes the integrity of the dat agra[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 104 Example: Configurin g L2TP LAN-to-LAN VPN Connection The branch office e s t ablishes a L2TP VPN tunnel with head office to co nnect two private networks over the Internet. The routers are inst alled in the head office and branch office accordingly . Both office LAN network[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 105 Configuring L2TP VPN in the Head Office The IP address 192.168.1.200 will b e assigned to the router located in the branch office. Please make sure this IP is not used in the head o ffice LAN. Item Function Description 1 Connection Name HeadOffice Given a name of L2TP conne[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 106 Configuring L2TP VPN in the Branch Office The IP address 69.1.121.30 is the Public IP address of the router located in head office. If you registered the DDNS (please refer to the DDNS section of this manual), you can also use the domain name instead of the IP address to re[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 107 V oIP - V oice over Internet Protocol V oIP enables telephone calls through existing Internet connection instead of going through the PSTN (Public Switched T elephone Network). It is not only cost-effect ive, especially for a long distance telephone charges, but also toll-q[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 108 Wiza rd This section provides easy setup for your V oIP s ervice. Phone port 1 and 2 can be registered to different SIP Service Provider . V oice QoS DSCP Marking : Differe ntiated Services Code Point (DSCP), it is the first 6 bits in the T oS byte. DSCP Marking allows user[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 109 Setting for Phone Port 2 Click box of Same as Phone Port 1 to set phone port 2 be identical as phone port 1. Please refer to descriptions in “Setting for Phone Port 1”. User-defined Profiles Note: User defined profiles are limited to 8 only. Profile Name: User-defined n[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 0 Confirm Password: Re-enter the password for confirmation. Display Name: This parameter will be appeared on the Caller ID. General Settings This section reflect s and contains basic settings for the V oIP module from selected provider in the Wizard section. Fail to provide [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 111 value is 5100) Region: This selection is a drop-down box, whic h allows user to select the country for which the V oIP device must work. When a country is selected, the country p arameters are automatically loaded. V oice QoS, : Differentiated Services Code Point (DSCP), it[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 2 PSTN Auto-fallback: Whenever V oIP SIP respo nses error and error code matching with the codes in th e Edit section, the V oiP calls will automatically fallback to PSTN. In the other word, the call will be called via the PSTN when V oIP SIP returns an error code. Click the[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 3 Phone Port This section displays sta tus and allows you to edit the account information of your Phones. Click Edit to update your phone information. Login Account Configuration Phone Number: This parameter holds the registration ID of the user with in the V oIP SIP registr[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 4 Confirm Password: Re-enter the password for confirmation. Display Name: This parameter will be appeared on the Caller ID. Codec Preference Codec is known as Coder-Decoder used for data si gnal conversion. Set the priority of voice compression; Priority 1 owns the top prior[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 5 PSTN Dial Plan (Router with LINE port only) This section enables you to configure “V oIP with PSTN switching” on your system. Y ou can define a range of dial plans to make regular call from V oIP switching to PSTN line. Prefix numbers is essential key to make a disting[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 6 PSTN Dial Plan Examples: 1) Dial with Prefix If you dial 01223 707070, number 01223707070 will be dialed out via FXO to make a regular phone call. 2) Dial without Prefix If you dial 9102, the number 102 will only be dialed out via FXO port to make a regular phone call. 3) [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 7 4) Dial at Timeout no Prefix If you only dial 97070 and no more numbers, after the timeout activates, 7070 will be dialed without prefix to make a regular call via FXO port. Even though 7070 (only 4 digits) do es not match with number of digits 6 defined in the filed, 707 [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 8 V oIP Dial Plan This section helps you to make a telephony number dialed as making a regular call via V oIP . Y ou no longer need to memorize a long dial string of number for making a V oIP call. Parameters A listed of special dial feature comes handy when you have a miss [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 11 9 Dial Plan Rules List Click Add to create and define V oIP dial-plan rule(s). Prefix Processing: Prepend xxx unconditionally: xxx number is appended unconditionally to the front of the dialing number when making a call. Prefix can also be included with any number and/or cha[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 120 a traditional phone number (PSTN) to an Internet addresses/ SIP URL. The ENUM number must be registered via a public ENUM site or your V oIP Service Provider . <@ SIPgateway>: It is used for the Intelligent Call Routing feature where you need to set up your SIP accoun[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 121 Localcheap.com is the default V oIP provider I set on phone port 1. When I call out any number start with 1 or 2 or 3 and plus rest of the phone number for local call, 03 is alw ays prepended in front of these number . If 2 3295 are dialed, 03-2-32935 is the actual phone nu[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 122 Mobilecheap.com is the default V oIP provider I set on phon e port 2. When I call out 123-39-45678 for a mobile call, 123 is replaced with 09. Therefore, 09-39-45678 is the actual phone number called out via Mobilecheap.com provider . The Intelligent Call Gateway not only s[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 123 Ring & T one This section allows advanced user to change the existing or newly defined parameters for the various ring tones (dial tone, busy tone, answer tone and etc.) Country Specific Ring & T one Region: Select a country ring-tone, from the drop-down list, where[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 124 Special Dial Codes The following table list s the special dial codes that are built-in to the system: Option Description Flash-hook (Wireless Router with LINE port only) Switch to PSTN line Note: A quick press of the hook. On some phones a button is provided which provides [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 125 QoS - Quality of Service QoS function helps you to control your network traf fic for each application from LAN (Ethernet and/or Wireless) to W AN (Internet). It facilitates you to control the dif ferent quality and speed of through put for each application when the system i[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 126 Source IP Address Range : The sou rce IP addre ss or range of packet s to be monitored. Destination IP address Range : The destination IP address or range of p ackets to be monitored. DSCP Marking : Differe ntiated Services Code Point (DSCP), it is the first 6 bits in the T[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 127 Outbound IP Throttling (LAN to W AN) IP Throttling allows you to limit the speed of IP traffic. Th e value entered will limit the speed of the application that you set to the specified value’ s multiple of 32kbps. Application : User-define description to identify this new[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 128 Inbound IP Throttling (W AN to LAN) IP Throttling allows you to limit the speed of IP traffic. Th e value entered will limit the speed of the application that you set to the specified value’ s multiple of 32kbps. Application : User-define description to identify this new [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 129 Example: QoS for your Network Connection Diagram Information and Settings Upstream: 928 kbp s Downstream: 8 Mbps V oIP User : 192.168.1.1 Normal Use rs : 192.168.1.2~192.168.1.5 Restricted User: 192.168.1.100 0 100 200 300 400 500 kbps VoIP/VP N HI GH Othe rs NORM AL Re str[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 130 Mission-critical application Mostly the VPN connection is mission-critical application for doing data exchange between head and branch office. The mission-critical application must be sent out smoothly without any dropping. Set priority as high level for preventing any othe[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 131 Sometime your customers or friends may upload their f iles to your FTP server and that will saturate your downstream bandwidth. The settings below help you to limit bandwidth for the restricted application.[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 132 Virtual Server (known as Port Forwarding) In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some port s have numbers that are pre-assigned to them by the IANA (the [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 133 Add Virtual Server Because NA T can act as a “natural” Internet firewall, yo ur router protects your network from being accessed by outside use rs when using NA T , as all incoming connection attempts will point to your router unless you specifically create V irtual Ser[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 134 Example: If you like to remote accessing your Router through the W eb/HTTP at all time, you would need to enable port number 80 (Web/HTTP) and map to Route r ’s IP Address. Then all incoming HTTP requests from you (Remote side) will be forwarded to the Router with IP addr[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 135 Edit DMZ Host The DMZ Host is a local computer exposed to the Internet. When setting a p articular internal IP address as the DMZ Host, all incoming packet s will be checked by the Firewall and NA T algorithms then p assed to the DMZ host, when a packet received does not us[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 136 Edit One-to-One NA T (Netw ork Address T ranslation) One-to-One NA T maps a specific private/local IP address to a global/public IP address. If you have multiple public/W AN IP addresses from you ISP , you are eligible for One-to-One NA T to utilize these IP addresses. NA T[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 137 Time Schedule: User-defined time period to enable your virtual server . Y ou may specify a time schedule or Always on for the usage of this V irtual Server Entry . For setup and detail, refer t o Tim e Schedule section Application : Users-defined description to identify thi[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 138 Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinat or for the assignment of unique parameter values for Int ernet protocols. Port num bers range from 0 to 65535, but only ports numbers 0 to 1[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 139 Time Schedule The T ime Schedule supports up to 16 time slots which help s you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usage of the Internet by users or applications. T[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 140 Configuration of Time Schedule Edit a Time Slot 1. Choose any Time Slot (ID 1 to ID 16) to edit, click Edit. Note: Watch it carefully, the days you have selected will presen t in capital letter. Lower case letter shows the day(s) is not selected, and no ru le will apply on [...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 141 Advanced Configuration options within the Advanced section are for users who wish to take advant age of the more advanced features of the router . Users who do not understand the features should not a ttempt to reconfigure their router , unless advised to do so by support s[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 142 Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is especially useful for hosting servers via your ADSL connection, so that anyone[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 143 Check Email This function allows you to have the router check your POP3 mailbox for new Email messages. The Mail LED on your router will light when it detects new messages waiting for download. Y ou may also view the status of this function using the S tatus – Email Check[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 144 Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device monitoring features. Embedded Web Server ( 2 Management IP Account s) HTTP Port: This is the port number the router’s embedded web serv[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 145 After 100 seconds, the device will au tomatically logout User A. Universal Plug and Play (UPnP) UPnP of fers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP offers many advantages for users runn[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 146  IP group  ICMP group  TCP group  UDP group  EGP (not applicable)  T ransmission  SNMP group From RFC1650 (EtherLike-MIB):  dot3S tat s From RFC 1493 (Bridge MIB):  dot1dBase group  dot1dTp group  dot1dS tp group (if configured as spanning t[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 147 IGMP IGMP , known as Internet Group Management Protocol , is used to management host s from multicast group. IGMP Forwarding: Accepting multicast packet. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Defa[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 148 VLAN groups need to be created. Ethernet: P1 (Port 1) Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first. Note: You should setup each VLAN gro up with caution. Each Bridge Interface is arranged in this order. Bridge Interface VLA[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 149 S paces next to VPI and VCI, type 0 and 33 in respectively . Select appropriate A TM Class, Encaps ulation Method, Acceptable Frame T ype, Filter T ype and PVID for Unt agged Frames. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Servic[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 150 Step 3: Setup VLAN Service Go to Configuration  Advanced  VLAN Bridge DefaultVlan lists all member port s. It is necessary to group specific member ports for each VLAN. From the example, two VLAN groups are requested: Dat a and Video. T o create another VLAN group for[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 151 Mapping the VLAN Bridge with Bridge Interface created in S tep1, you will see the conformable relationship in these two screenshot s. Step 4: IGMP Snooping Enable Go Configuration  Advanced  IGMP . IGMP Snooping must be enabled in order to allow video stream forwardin[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 4: Configuration 152 Logout T o exit the router’s web interface, choose Logout . Please ensure that you have saved the configuratio n settings before you logout. Be aware that the router is restricted to only one PC accessing the configuration we b pages at a time. Once a PC has logged into t[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Chapter 5: T roubleshooting 153 Chapter 5: T roubleshooting If the router is not functioning properly , first check this chapter for simple troubleshooting before contacting your service provider or Billion support. Problems st arting up the router Problem Corrective Action None of the LEDs are on when[...]

V oIP/(802.1 1g) ADSL2+ (VPN) Firew all Router Appendix A: Product Support and Contact Information 154 APPENDIX A: Product Support and Cont act Information Most problems can be solved by referring to the T roubleshooting section in the U ser ’s Manual . If you cannot resolve the problem with the T roubleshooting chapter , please cont act the deal[...]