Brother HL-5250DN Series Bedienungsanleitung

USER’S GUIDE Brothe r Laser Prin ter HL-5240 HL-5250DN series For visua lly-imp aire d users You can read this manual with Scr een Reader ‘text-to-speech’ softwar e. You mus t set up th e hardware a nd ins tall the driver be fore you ca n use t he printer. Pleas e use the Qui ck Setu p Guide to set up th e printer. Y ou can fi nd a printed co[...]

i Using th is guid e Symbols used in this guide We use the following icons throughout this User’s Guide : Warnings tell you what to d o to pr event possible pe rsonal injur y. Electric al Hazard icons aler t you to a possible elect rical shock. Hot Surface icons warn you not to touch machine parts that are hot. Cautions specif y procedures you mu[...]

ii Safety precautions To use the printer safely WARNING There are high volt age electrodes i nside the printe r. Before you clean the i nside of the print er, make sure that you have turned of f the power switch and unplugg ed the printer fr om the AC power outlet. DO NOT handle the plug with wet hands. Doing this might cause an electri cal shock. [...]

iii DO NOT remove or damage the caution labels locat ed on or around the fuser. DO NOT use a vacuum cleaner to clea n up scattered toner . Doing this mi ght cause the toner dust to ignite inside t he vacuum cleaner, potential ly starti ng a fire. Carefully clean the t oner dust with a dry, lint-free cloth and dispose of it accordi ng to local regul[...]

iv Tradema rks The Brother logo is a registered trademark of Brot her Industries, Ltd. Apple, t he Apple Logo, Macintosh and TrueType ar e regist ered trademar ks of Apple Computer, Inc in the United States and oth er countries. Epson is a registered tr ademark and FX-80 and FX-850 are trademarks of Seiko Epson Corporatio n. Hewlett Packar d is a r[...]

v Table of Contents 1 About this Printer What is in the box? ................. ............. .................... ............ .................... ................... ....... ................... .....1 Interface cable ............................... ............. ................... .................... ............. ................ .............[...]

vi 5 Options Lower tray unit (LT-5300) .............. ............. ................... ............. ................... .................... .... ............... ...56 DIMM ................... ............. ................... ............. ................... .................... ............. ....... ......................... ... 57 DIMM types [...]

vii Quick referen ce for bar co de control c ommands ..... ................... ............. ................... .................... ...... . 111 Print bar codes or expan ded charac ters..... ............. ................... ............. .................... ................... . 111 B Appendix (For Europe and Othe r Countries) Brother Numbers .[...]

1 1 What is in the box? When you unpack the printer , make sure that you have all of the following part s. Interf ace cable An interface cable is not a standard accessory. Buy the proper interf ace cable for the inter face you want to use (USB, parall el or network).  USB cable Do not use a USB interface cable tha t is longer than 6 feet (2.0 me[...]

1. About t his Printer 2 Front view 1 Front cover release butt on 2 Control panel 3 Face-down output tray support flap ( support fl ap) 4 Front cover 5 Paper tray 6 Power switch 7 Face-down output tray 8 Multi-purpos e Tray (MP Tr ay) 5 6 7 8 2 3 4 1[...]

1. About t his Printer 3 Back view 1 Back cover 2 Duplex Tr ay (For HL-5 250DN) 3 AC power connector 4 HL-5250DN: Network status LEDs (Li ght Emitting Diodes) 5 HL-5250DN: 10/10 0BASE-TX port 6 USB interface connector 7 DIMM cover 8 Parallel int erface connector Note The printer il lustrat ion is based on HL-5250DN. 1 2 3 5 4 7 6 8[...]

1. About t his Printer 4 Positioning the printer Read the following b efore y ou use t he print er. Power supply Use the printer within the recommended powe r range. The power cor d, incl uding extens ions, should be no longer than 5 met ers (1 6.5 feet) . Do not share the same power circui t with other high-power applianc es, such as an air condit[...]

5 2 About pa per Type and size of paper The printer l oads paper from the install ed paper tray or the multi- purpose tray. The names for the paper trays in the pri nter driver and this guide are as follows: When looking at this pa ge on the CD-ROM, yo u can ju mp to the page for each printing method by clicking p in the table. Printing Methods Pap[...]

2. Printing Metho ds 6 1 Legal size paper is not available in some regions outside the USA and Canada. Recommended paper  Before you buy a lot of paper, test a small quantity to make sur e that the paper is suit able.  Use paper that is made for plain- paper copying.  Use paper t hat is 75 to 90 g/m 2 (20 to 24 lb).  Use neutral paper. [...]

2. Printing Metho ds 7 Types of envel opes Most envelop es will be suitabl e for y our pri nter. Howev er, s ome envelope s may have feed an d print quality problems due to t he way they have been made. A su itable env elope s hould hav e edges with straight , well- creased fol ds and the l eading edge sh ould not be thicker than two pi eces of pap[...]

2. Printing Metho ds 8 Printable are a When using PCL ( standard driver) emulation, the edges of the pape r that can not be pri nted on are s hown in the tabl es below. Note When using BR-Script e mulation , the edges of the paper that cannot be pr inted o n are 4.32 mm ( 0.17 in.) . Portrait Landscape A4 Letter Legal B5 (ISO) Executive A5 A6 B6 14[...]

2. Printing Metho ds 9 Printing meth ods Printing on plain pap er, bon d pap er and transparencies Printing on plai n paper, bond paper or trans parencie s from Tray 1, 2 or 3 For the proper p aper to use , see About paper on page 5. a Choose the f ollowing from the p rinte r driver : Paper Size ....... .... ....... ...... .... (1) Media Type .....[...]

2. Printing Metho ds 10 b Pull the paper tray comple tely out of the printer. c While pressin g the blue paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are f irmly in the sl ots. For legal size pape r 1 , press i n the paper-g uide rel ease lever and pull out the back of the pa per tr ay. 1 Legal [...]

2. Printing Metho ds 11 e Put the p aper tr ay fir mly back in the printe r. Make sur e that it i s complet ely inser ted in to the p rinter. f Lift up the sup port flap to pr event paper from sli ding off the fac e-down output tra y, or remove each page as soon as it comes out of the printer . g Send the print data to the printer. Note • The sid[...]

2. Printing Metho ds 12 Printing on plai n paper, bond paper or trans parencies from the MP tray MP Tray mode is automatically t urned on when paper is put in th e multi-purpose tray . For the proper p aper to use , see About paper on page 5. a Choose the f ollowing from the p rinte r driver : Paper Size ....... .... ....... ...... .... (1) Media T[...]

2. Printing Metho ds 13 b Open the MP tray and lower it gently. c Pull out the MP tray support fl ap (1). d Lift up the sup port flap to pr event paper from sli ding off the fac e-down output tra y, or remove each page as soon as it comes out of the printer . 1[...]

2. Printing Metho ds 14 e Put paper in the MP tray. Make sure that the paper stay s under the maximum paper mark ( b ) on bo th sides of the tra y. f While pressi ng the paper-guide release l ever, slide th e paper guide to fit the paper size. g Send the print data to the printer. Note • The side to be printed on must be face up with the leading [...]

2. Printing Metho ds 15 Printing on thick paper, labels and envel opes MP Tray mode is automatical ly turned on when paper is put in th e multi-purpos e tray. For the proper p aper to use , see About paper on page 5 and Types of envelopes on page 7. a Choose the f ollowing from the p rinte r driver : Paper Size ....... .... ....... ...... .... (1) [...]

2. Printing Metho ds 16 b Open the MP tray and lower it gently. c Pull out the MP tray support fl ap (1). d Lift up the sup port flap to pr event paper from sli ding off the fac e-down output tra y, or remove each page as soon as it comes out of the printer . 1[...]

2. Printing Metho ds 17 e Put paper in t he MP tray. Make sure that t he paper s tays under the maxi mum paper mark ( b ) on both sides of the tra y. Note • Envelope joint s that are sealed by the manufac turer should be secur e. • The side to be printed on must be face up. • All sides of the envelope should be prope rly folded without wrinkl[...]

2. Printing Metho ds 18 Note • If the DL size doub le fl ap envelope is cr eased after pri nting, c hoose DL Long Edge in Paper Size , f rom the Basic tab. Put a new DL si ze double-f lap enve lope in the MP t ray with t he longe st edge o f the envelope in fir st, the n prin t agai n. • When you put paper in the MP tray, remember the f ollowin[...]

2. Printing Metho ds 19 Duplex Printi ng The supplied pri nter dr ivers for Windo ws ® 95/98/Me/200 0/XP and Windows NT ® 4.0, Mac OS ® 9.1 to 9.2 and Mac OS ® X 10.2.4 or greater all enable dupl ex printing. For more infor mation about how to choose the settings , see the Help text in the pri nter dri ver. Guidelin es for printing on both side[...]

2. Printing Metho ds 20 Note • If you choose the Paper Sour ce to be Auto Select , put the printed even-number ed pages in the MP tray. • When you put pap er in the paper tray, f irst empty the t ray. Next, put the pri nted pages in the tray, wi th the printed side f ace up. ( Do not ad d the p rinted pages to the top of a stack of unpr inted p[...]

2. Printing Metho ds 21 Paper orientation for ma nual duplex printing The printer pr ints the second page fir st. If you print 10 pages on 5 sheets of paper, it will print page 2 and then page 1 on t he first sheet of paper. I t will print page 4 and then page 3 on the second sheet of paper. It will print page 6 and then page 5 on the third sheet o[...]

2. Printing Metho ds 22 Automatic dupl ex printing (For HL-5250DN) Note • The screens in t his section are from Windows ® XP. The screens on your PC may var y depending on your operating syst em. • Use A4, Letter or Legal si ze paper when you use the automatic duplex pri nting functi on. • Make sure that th e back c over i s closed. • Make[...]

2. Printing Metho ds 23 4 Click OK . The printe r will print on both si des of the paper auto matically . Booklet printing (For Windows printer d river) a Put paper in th e paper tray or MP tray. b Open the Properties dia log box in the printer dri ver. c From the General tab, choose the Printing Preferences i con. d From the Advanced tab, cho ose [...]

24 3 Printer driver A prin ter driver i s softwar e that tr anslates data fro m the form at used by a compu ter to the format tha t a parti cular p rinter needs. T ypically , this fo rmat is pag e desc ription la nguage (PDL). The print er driv ers for th e followi ng version of Windo ws ® and Mac intosh ® a re on the C D-ROM we have sup plied or[...]

3. Dri ver and Sof tware 25 You can change the following pri nter setti ngs when you print from your computer.  Paper Size  Multi ple Page  Orientati on  Copies  Media Type  Paper Source  Resolution  Toner Save Mode  Duplex printi ng (Manual Duple x printing 1 3 / Duplex printing wit h Duplex tray 4 )  Water ma rk 1 3 [...]

3. Dri ver and Sof tware 26 Features in the pri nter driver (For Wi ndows ® ) For more i nformation, see the Help text i n the printer driver. Note • The screens in this sec tion are from Windows ® XP. The screens on your PC will vary dependi ng on your operating syst em. • If you are using Windows ® 2000 or XP, you can access the Printing P[...]

3. Dri ver and Sof tware 27 Advanced ta b Change the tab settings by cli cking one of the foll owing icons:  Print Qu ality (1 )  Duplex Printing (2)  Water mark (3)  Page Setting (4)  Device Options (5) Prin t Q ual ity  Resolution You can change the resoluti on as follows: • 1200 dpi • HQ 1200 • 600 dpi • 300 dpi Note If[...]

3. Dri ver and Sof tware 28  Toner Save Mode You can save running costs by tur ning on the Toner Save Mode , which reduces the print density. Note • We do not recommend Toner Save for printing Photo or Gray Sca le images. • Toner Save Mode is not available f or 1200 dpi or HQ 1200 reso lution .  Print Setti ng You can manually change the [...]

3. Dri ver and Sof tware 29 Device Options You can set the following in Printer Function : (You ca n jump to the page for each Print er Function by choosing the funct ion name in the list below.)  Job Spooling  Quick Prin t Setup  Sleep Time  Status Monitor  Macro  Administra tor (For Windows ® 95/ 98/Me only)  Insert Command/[...]

3. Dri ver and Sof tware 30  Job Spooling The printer keeps the last print j ob sent to it in memory. To reprint the last document, pres s Go and hold i t down fo r about 4 seconds unti l all the LEDs light up i n order ( Toner , Drum , Paper , Status ), and then release Go . Withi n 2 seconds press Go the number of times you want to repri nt. I[...]

3. Dri ver and Sof tware 31  Administrator (For Windows ® 95/98/ Me only) Administra tors have the auth ority to limit the number of copies, scaling setting and water mark setting functions . • Password Enter the password int o this box. • Set Password Click here to change the password. • COPY LOCK Lock the co py pages selection to pr eve[...]

3. Dri ver and Sof tware 32 Access ories ta b Note From the Start menu, select Control Panel and then Pri nters 1 . Right -click the Brother HL- 5240/5250DN series ic on and se lect Properties t o access t he Accessori es tab. 1 Printers and Faxes for Windows ® XP users.  Available Opti ons (1) You can manually add and remove the optio ns that [...]

3. Dri ver and Sof tware 33 Support tab  Version (1) Displa ys the printer dr iver vers ion.  Web Update (2) You can check the Brother web sit e for updated driver s, and automatically download and update the printer dr iver on your PC.  Brother Soluti ons Center (3) The Brother Solutions Cent er (http:/ /soluti ons.brother. com ) is a web[...]

3. Dri ver and Sof tware 34 Features in the BR-Script (PostScript ® 3™ language emulation) pr inter driver (For Windows ® ) For more i nformation, see the Help text i n the printer driver. Note The screens in this section are based on HL-5250DN with Windows ® XP. The screens on your PC may vary depending on the printe r model and your operatin[...]

3. Dri ver and Sof tware 35 Prin tin g Pr efere nces Note If you are using Wind ows NT ® 4.0, Windows ® 2000 or XP, you can access the Printing Pref erences dial og box by clickin g Printing Preference s... in the General t ab of the Brother HL-5240/HL-5250DN BR-Script3 Pr operties di alog box.  Layout tab You can change the l ayout se tting b[...]

3. Dri ver and Sof tware 36 Advanced options a Choose the Pape r Size and Copy Count (1). b Set the Scaling an d TrueType Font settin gs ( 2). c You can change settings by choosing t he setting in the Printer Features list (3):  Print Qu ality  Media Type  Toner Save You can save running costs by tur ning on the Toner Save , which reduce s[...]

3. Dri ver and Sof tware 37 Features in the printer driver (For Macint osh ® ) This print er supports Mac OS ® 9.1 to 9.2 and Mac OS ® X 10.2.4 or greater. Note The screens in this section are from Mac OS ® X 10.4. The screens on your Macintos h ® will vary dependi ng on your operating sys tem. Page Set up You can set the Paper Size , Orientat[...]

3. Dri ver and Sof tware 38 Print Sett ings You can change settings by choos ing the setting in the Print Settings list: Basic tab  Resolution You can change the resoluti on as follows: • 3 00 dpi • 6 00 dpi • HQ 1200 • 1 200 dpi Note If you use the high quality 1200 dpi setting (1200 × 1200 dpi) the print speed will be slower .  Med[...]

3. Dri ver and Sof tware 39 Advanced tab  Prin t Qua lity You can change the print qual ity as follows: • Brother Phot o This is a photograph mode (gradati on priorit y). Choose this setting for printing phot ographs that have continuous gradat ion. You can represent soft contrast s between various shades of gr ay. • Brother Gra phics This i[...]

3. Dri ver and Sof tware 40 Uninstalling the printer driver You can uninstall the pri nter driver that you install ed with the foll owing steps. Note • This is not avail able if you instal led the printer driver from the Windows Add a printer function. • After uninst alling, we recommend t hat you restart your computer to remove files that were[...]

3. Dri ver and Sof tware 41 Brother Laser driver for Mac intosh ® For Mac OS ® X 10.2.4 or greater a Disconnect the USB cable between the Macintosh and your printer . b Restart the Maci ntosh ® . c Log on as an ‘Administrator ’. d Run the Prin ter Se tup Ut ility 1 (from the Go menu, c hoose Appli cations , Utilit ies ), then choose t he pri[...]

3. Dri ver and Sof tware 42 Software Software for networks (For HL-5250DN only) BRAdmin Professional (For Windows ® ) The BRAdmin Professional is a uti lity for managing your Brothe r network enabled pri nters that are run ning under Windows ® 95/9 8/Me/2000/XP and Windows NT ® 4.0. I t allows you t o easily configu re and check the status of yo[...]

3. Dri ver and Sof tware 43 About emulatio n modes This printe r has the followi ng emulation modes. You can change the setti ng using Remote Printer Console or a Web browser.  HP LaserJet Mode The HP LaserJet mode (or HP mode) is the emulation mod e in which this printer supports the PCL6 language of the Hewlett- Packard ® LaserJ et las er pri[...]

3. Dri ver and Sof tware 44 Automatic interface selection This print er has an automati c inter face selecti on feature t hat is turned on by default . This let s it automat ically change the i nterface to IEEE 12 84 parallel , USB, or Ethernet depending on which interf ace is receivin g data. When you use the parallel inter face, you can turn the [...]

45 4 LEDs (Ligh t Emitting Diod es) This secti on ref ers to the fo ur LEDs Toner , Drum , Paper and Status , and two button s Go and Job Cance l on the control panel . The LED indications shown in the ta ble below are used in the illus trations i n this chapter. Note When the power switch is off or the printer is i n slee p mode, all the LEDs ar e[...]

4. Co ntro l Pane l 46 LED Printer status Sleep mode The po wer switch is off or the prin ter is in s leep mode . Pressin g Go wake s up th e printer from sle ep mode to ready mode. Ready to print The pri nter is re ady to print . Warming up The pri nter is war ming up. Cooling down The pri nter is coo ling down . Wait for a few sec onds unti l ins[...]

4. Co ntro l Pane l 47 Data remaining in me mory There i s remainin g print d ata in the p rinter mem ory. If th e yellow St atus LED i s on for a l ong time a nd nothing has printed , press Go to print t he remainin g data in memor y. Toner low Indica tes that the toner cartridge is nearly empty . Buy a new toner cartridge and have it ready for wh[...]

4. Co ntro l Pane l 48 No paper Put paper in the tray. Then press Go . See Pri nting on plai n paper, b ond paper and trans parencies on page 9 or Printing o n thick paper , labels and envelope s on pa ge 15. Paper ja m Clear the pa per jam. See Paper jams and how to clear them on page 84. If the prin ter does no t start pri nting, pres s Go . I nc[...]

4. Co ntro l Pane l 49 Service call indic ations If there is an erro r that cannot be cleared by the user , the printer will show that a service cal l is needed by lighting up all t he LEDs as shown bel ow. If you see the service call indicati on shown above, turn off the power switch, wait a few seconds, and then turn it back on and try to print a[...]

4. Co ntro l Pane l 50 For example, the LED i ndication bel ow shows a fuser uni t fail ure. Make a note of the indicat ion and report the err or status to your dealer or a Brother authori zed service representat ive by r eferr ing to t he above table. Note Make sure that the front cover is completel y closed before you repor t a servic e call.[...]

4. Co ntro l Pane l 51 Control panel b uttons The control panel buttons have the followin g functions:  Cancel print ing If you press Job Cancel while printing, the pri nter will immediat ely stop print ing and will then eject th e paper.  Wake-up If the print er is in sleep mode, press Go or Job Cancel to wake the pr inter up and go to the R[...]

4. Co ntro l Pane l 52 Print a test page You can use the Go button or t he pri nter dri ver to print a test page. Using control panel button a Turn off the pri nter. b Make sure that the front cover is closed and the power cord is plugged in . c Hold down Go as you tu rn on the po wer switch. Fi rst all the LEDs will light up, and then the St atus [...]

4. Co ntro l Pane l 53 Print a Printer Settings page You can print the curr ent settings using the control panel button or print er driver. Using the control panel button a Make sure that the front cover is closed and the power cord is plugged in . b Turn on t he prin ter and wai t until the printer is in the r eady sta te. c Press Go three ti mes [...]

4. Co ntro l Pane l 54 Print Fonts You can print a list o f the internal font s using the control panel button or print er driver. Using the control panel button a Turn off the pri nter. b Make sure that the front cover is closed and the power cord is plugged in . c Hold down Go as you tu rn on the po wer switch. Fi rst all the LEDs will light up, [...]

4. Co ntro l Pane l 55 Network default setting (For HL-5250DN) If you want to reset t he print server back to its default s ettin gs (resett ing a ll info rmation su ch as t he password and IP address infor mation), fol low these steps: a Turn off the pri nter. b Make sure that the front cover is closed and the power cord is plugged in . c Hold dow[...]

56 5 This printer has t he following optional ac cessories. You can incr ease the capabiliti es of the p rinter with these items . Lower tray unit (LT -5300) Two optional lower trays (Tray 2 or Tray 3) can be instal led, and each lower tray can hold up to 250 sheet s of 80 g/ m 2 (21 lb) paper. When both optional tr ays are inst alled, the pr inter[...]

5. Optio ns 57 DIMM For HL-5240 The HL-5240 pr inter ha s 16 MB of standard memory and one slot f or opti onal memory expan sion. You can expand the memory up t o 528 MB b y instal ling dual in-li ne memory modu les (DIMMs). For HL-5250DN The HL-5250DN pr inter has 32 MB of standard memory and one slot f or option al memory expansion. Y ou can expa[...]

5. Optio ns 58 Insta llin g extra mem ory a Turn off the pri nter power switch, and then unplug the printer. Disconnect the interface cable fro m the printer . Note Be sure to turn off the printer power s witch b efore you i nstall or remove the DIMM. b Remove the DIMM cover. c Unpack the DIMM and hold it by its edges. CAUTION To prevent damage to [...]

5. Optio ns 59 e Put the DIMM cover back on. f Reconnect the i nterface ca ble to your printer . Plug the print er back in, and then turn on the power switch. Note To make sure that you have ins talled the DIMM prope rly, you can pri nt the print er settings page that sho w s the current memor y size. See Print a Printer Setting s page on page 53.[...]

5. Optio ns 60 Print server (NC-2 100p) (For HL -5240) An optional networ k print server (NC-2100p) allows y ou to connect to your network through the par allel interf ace. Note HL-5250DN alre ady has a built- in 10/100BASE-TX Ethernet Pr int Server . Network interface 10/100BAS E-TX Et hernet Print er inter face Paralle l Suppor t protocol TCP/IP,[...]

61 6 You will need to r eplace cert ain parts and cl ean the pr inter r egularly. WARNING When you replace certain part s or clean the insi de of the printer, remember the foll owing: • If your clothes are smear ed with toner, wipe off t he toner with a dry clot h and immediately wash the clothes in cold wat er to avoid st ains. • Be careful n [...]

6. Ro utine Maint enanc e 62 Toner cartridge A new toner cartridge can prin t approximately 3,500 ( standard car tridge) or approxi mately 7,000 (high yield cartridge) A4 or Lett er size singl e-sided pages at 5% coverage. Note • The amount of toner used vari es according to what is print ed on t he page and t he pri nt densit y setti ng. • If [...]

6. Ro utine Maint enanc e 63 Replacing the toner cartridge Note • To ensure hi gh qualit y printi ng, we recommend that you use only g enuine Brother toner car tridges. When you want to buy toner cartridges, call the deal er you bought the pri nter from o r Brother Customer Servi ce. • We recommend that you clean t he printer when you rep lace [...]

6. Ro utine Maint enanc e 64 c Push down the blue lock lever and take the t oner cartridge out of the dr um unit. CAUTION DO NOT put a toner cartridge in to a fire. It could explode, resulting in injuries. Handle the to ner cart ridge caref ully. If toner scatt ers on your hands or clothes, wipe or wash it off wi th cold water at once. To avoid pri[...]

6. Ro utine Maint enanc e 65 CAUTION Wait to unpack the toner cart ridge until immediately befor e you put it in the prin ter. If toner cartridges ar e left unpacked for a long time the toner li fe will be shortened. If an unpacked drum unit is put in direct sunli ght or room light, the unit may be damaged. Put the toner cart ridge in the d rum uni[...]

6. Ro utine Maint enanc e 66 e Pull off the protec tive cover. f Put the n ew toner cartridge f irmly i nto the drum unit until you hear it lock into place. I f you put it in properly, the loc k leve r will lift aut omatically. CAUTION Make sure t hat you put in the toner cartridge properly or it may separate from the drum uni t. g Clean the p rima[...]

6. Ro utine Maint enanc e 67 h Put the d rum unit and toner cartri dge assembly b ack in the prin ter. Close the front cov er.[...]

6. Ro utine Maint enanc e 68 Drum unit A new drum unit can print approximat ely 25,000 A4 or Letter size si ngle-sided pages at 5% coverage. Note • There are many factors that determine the actual drum life, such as the temperat ure, humidit y, type of paper, type of toner used, number of pages per print job and so on. Under i deal conditi ons, t[...]

6. Ro utine Maint enanc e 69 When you replace the drum unit with a new one, you need to reset the drum counter by compl eting the followi ng steps: a Make sure that the print er is turned on and the Drum LED is blinki ng. Press the fr ont cover releas e button and then ope n the front cover . b Press and hold down Go for about 4 seconds until all t[...]

6. Ro utine Maint enanc e 70 CAUTION We recommend that you put the drum unit and to ner cartri dge assembly on a piece of disposable paper or cloth in case you accident ally spill or scatter to ner. To prevent damage to the pri nter from static ele ctricity, DO NOT touch the electrodes shown in the illus tration. d Push down the blue lock lever and[...]

6. Ro utine Maint enanc e 71 e Unpack the new drum unit . CAUTION Wait to unpack a drum unit until immediately befor e you put it in the prin ter. Exposure to di rect sunlight or room lig ht may da mage the drum un it. f Put the toner car tridge firml y into the new drum unit unt il you hear it loc k into place. I f you put the cartrid ge in proper[...]

6. Ro utine Maint enanc e 72 Replacing periodic maintenanc e parts You need to replace the peri odic maintenance parts reg ularly to maintain print qual ity. You should repl ace the part s liste d below after pr inting t he foll owing number of pages. 1 At 5% print coverage (A4 or Letter size). The actual number of printed pages will var y dependin[...]

6. Ro utine Maint enanc e 73 Cleani ng Clean the outside and inside of the printer reg ularly wit h a dry, lint-f ree cloth. When you replace the toner cartridge or the d rum unit, make sur e that you clean the inside of the pr inter. If print ed pages are stained with toner, c lean the i nside of the pri nter wit h a dry , lint -free cl oth. Clean[...]

6. Ro utine Maint enanc e 74 c Wipe the outside of th e printer with a dry, lint-f ree cloth to remove dust. d Remove anything that i s stuck inside the paper tr ay. e Wipe the inside of th e paper tray with a dry, l int-fre e cloth to remove dust. f Put the paper tray back i n the printer. g Plug the printer back i n, and then turn on the power sw[...]

6. Ro utine Maint enanc e 75 b Press the front cover release but ton and then open t he fr ont cove r. c Take out t he drum unit and t oner cart ridge assembly. HOT SURFACE After y ou have j ust used t he pri nter, s om e in ternal p arts of the pr inter will b e extr emely hot. W ait f or th e printer to cool down before you touch the int ernal pa[...]

6. Ro utine Maint enanc e 76 To prevent damage to the pri nter from static ele ctricity, DO NOT touch the electrodes shown in the illus tration. d Wipe the s canner window wi th a dr y, li nt-free cloth. e Put the d rum unit an d toner cartridge assembly back in th e printer. f Close the front cover. g Plug the printer back i n, and then turn on th[...]

6. Ro utine Maint enanc e 77 Cleaning the cor ona wire If you have print quali ty problems, clean the cor ona wire as follows: a Press the front cover release but ton and then open t he fr ont cove r. b Take out t he drum unit and t oner cart ridge assembly. CAUTION We recommend that you put the drum unit and to ner cartri dge assembly on a piece o[...]

6. Ro utine Maint enanc e 78 c Clean the p rimary cor ona wire i nside the dr um unit by gently sl iding the blue tab from right to left and left to rig ht sever al times. CAUTION Be sure to ret urn the tab t o the home posi tion ( a ) (1) . If you do not, pr inted pa ges may have a vertical stripe. d Put the d rum unit and toner cartri dge assembl[...]

79 7 You can correct most problems by yours elf. If you need additional help, the Brot her Solutions Cent er offers the lat est FAQs and t rouble shooting t i ps. Visit us at http ://solutions.b rother.com . Identify ing you r proble m First, check the foll owing:  The AC power c ord is connected pr operly and the pr inter i s turned on.  All[...]

7. Troub leshooti ng 80 Error me ssages in the Sta tus Monitor The Status Monitor will report proble m s with the print er. Take the proper acti on by referring to the fol lowing table. The default setting for the St atus Monitor is off. If y ou want to turn the status monitor on, you can c hange the setting of the St atus Monito r in Device Option[...]

7. Troub leshooti ng 81 Dust On Drum  See Cleaning the corona wire on page 7 7. Memory Full  Press Go t o print th e remain ing data i n the pri nter memo ry. Cancel the print job if yo u want to delete the rem aining d ata in th e print er memor y. See Control pa nel buttons on page 51 .  Redu ce the co mplexity of your do cument or cut t[...]

7. Troub leshooti ng 82 Error me ssage printout The printer can al so report proble ms by printing an error message. Use the table below to identif y and clear the erro r message. Error mes sage Action MEMO RY F ULL  Press Go t o print th e remain ing data i n the pri nter memo ry. Cancel the print job if yo u want to delete the rem aining d ata[...]

7. Troub leshooti ng 83 Paper ha ndling First, make sure that you are using paper that meets Brother recommended paper specificati ons. See About paper on page 5. Problem Recommendation The prin ter does not feed paper.  If the re is paper in the p aper tray, m ake sure it i s straigh t. If the p aper is cu rled, strai ghten it b efore pr inting[...]

7. Troub leshooti ng 84 Paper jams and how to clear them If a paper jam occurs, the printer wil l flash the Paper LED as shown below. HOT SURFACE After you have j ust used the pri nter, some int ernal parts of the pr inter will be extremely hot . When you open the front cover or back cover of the printer , DO NOT touch the shaded parts shown in the[...]

7. Troub leshooti ng 85 a Press the cover rel ease button and then open the fron t cover. b Slowly t ake out the drum uni t and to ner cartridge assembly . The jammed paper wil l be pulled ou t with the drum un it and t oner car tridge assembl y. CAUTION To prevent damage to the prin ter caused by static elec tric ity, DO NOT touch the electrodes s[...]

7. Troub leshooti ng 86 c Pull the paper tray comple tely out of the printer. d Close the front cover. e Pull the jammed paper up and out of the print er. f Open the front cover agai n.[...]

7. Troub leshooti ng 87 g Open the back cover. h Pull the tab s at the left and right hand s ides toward you t o open the f user c over (1). i Using both hands, gentl y pull the jammed paper out of the fuser unit. 1[...]

7. Troub leshooti ng 88 HOT SURFACE After y ou have j ust used t he pri nter, s om e in ternal p arts of the pr inter will b e extr emely hot. W ait f or th e printer to cool down before you touch the int ernal parts of the printer. j Fully c lose the b ack cover. k Pull t he duplex t ray complete ly out of the printer. l Pull the the jammed paper [...]

7. Troub leshooti ng 89 m Push down the b lue lo ck lever and take the t oner cartr idge out of t he drum unit . Clear t he jammed paper if there is any inside the drum unit. CAUTION Handle the to ner cart ridge caref ully. If toner scatt ers on your hands or clothes, wipe or wash it off wi th cold water at once. To avoid print quality problems, DO[...]

7. Troub leshooti ng 90 o Put the d rum unit an d toner cartridge assembly back in th e printer. p Put the paper tray fi rmly back in the pri nter. q Close the front cover. r Make sure that the Paper LED is now off and the pri nter is ready.[...]

7. Troub leshooti ng 91 Improving the print q uality If you have a print qualit y problem, print a test page first (see Print a test page o n page 52). If the printout looks good, t he problem is probably not the print er. Check the interface cable or tr y the print er on another PC. This section gives informati on on the following topics. Examples[...]

7. Troub leshooti ng 92 Hollow print  Make su re t hat y ou use pap er t hat m eets our spec ificati ons. See About pa per on page 5.  Choo se Thick paper mode in the printer driver, o r use thinn er paper than what you are n ow using.  Check the print er ’ s envi ronment. Co nditions s uch as high humidity can cause hollow print. S ee P[...]

7. Troub leshooti ng 93 White Spots on black text and graphics at 94 mm (3.7 in.) intervals Black Spo ts at 94 mm (3.7 in.) intervals  If the problem is not sol ved after printin g a few pages , the d rum unit may have glue fr om the la bel st uck on th e OPC dr um surfa ce. Clean t he drum u nit as follow s: a Put the print sa mple in fr ont of[...]

7. Troub leshooti ng 94 Black ton er marks across th e page  The drum uni t may be damage d. Put in a new drum unit. S ee Replacin g the drum unit on page 68.  Make su re t hat y ou use pap er t hat m eets our spec ificati ons. See About pa per on page 5.  If yo u use labe l sheets fo r laser prin ters, the g lue from th e sheets m ay some[...]

7. Troub leshooti ng 95 Wrinkl es or crease s  Make s ure that the paper is loade d properly . See Pr inting on plain paper, bo nd paper or transpa rencies fr om Tray 1, 2 or 3 on pa ge 9.  Check the paper type and q uality. See About pape r on page 5.  Turn ove r the stac k of paper in the tray or try rotating the pap er 180 ° in the in [...]

7. Troub leshooti ng 96 Poor Fixing  Open th e back co ver and m ake sur e that the two b lue lever s on the l eft and rig ht hand sides a re in the down po sition. Examples of poor print quality Recommendation ABCDEFGH abcdefghijk ABCD abcde 01234[...]

7. Troub leshooti ng 97 Solving prin t problems Problem Recommendation The pr inter pri nts unexp ectedly or it p rints garbage data.  Make s ure that the printe r cable is not to o long. We recomm end that yo u use a paral lel or USB ca ble tha t is no l onger than 2 m eters ( 6.5 feet).  Make s ure that the printe r cable is not da maged or[...]

7. Troub leshooti ng 98 Network prob lems For problems co ncerning using your printer on a Networ k , see the Network User’ s Guide on the CD-ROM we have sup plied. Other probl ems For Macintosh ® with USB Printing from DOS Problem Recommendation The prin ter cann ot print. The ‘ There was an erro r writing to LPT1: (or BRUSB) for the printer?[...]

7. Troub leshooti ng 99 BR-Script 3 CAUTION Not fol lowing the instruct ions for using th e printer may cause you t o be responsi ble for all r epairs. Problem Recommendation The prin t spee d slows down. Add optio nal me mory. See In stallin g extra m emory o n page 58. The pr inter cann ot print EPS data that inc ludes binary . You ne ed the foll[...]

100 A Printer specificat ions Engine 1 From standard paper tray and optional paper tray 2 2 If you use the high qualit y 1200 dpi setting (1200 × 1200 dpi) t he print speed will be slower. Appendix Mod el HL-5240 HL-5 250DN Technology Electrophotog raphic Print s peed Up to 30 ppm (Le tter size) 1 , Up to 28 ppm (A4 si ze) 1 First print time Less [...]

A. Appendix 101 Controller 1 USB is not s upported under Windows ® 95 or Windows NT ® 4.0. 2 Brother original Windows ® ut ility for printer and print server manag ement. 3 Brother original Macintosh ® utility for printer and pr int server m anagement. 4 Server based management utility. Downl oad from http://solutions.brother.com . 5 Printer an[...]

A. Appendix 102 Software 1 Download the printer driver for Windows ® XP Professional x 64 Edition from http://solutions.brother.com . 2 Download the printer driver for Linux from htt p://solutions.brother.com . 3 Instructional animations for problem solving 4 The Driver Deployment Wizard au tomates the installation o f printers in a peer -to-peer [...]

A. Appendix 103 Media specifi cations 1 Up to 10 sheets 2 Legal size paper is not available in som e regions outside the USA and Canada. Supplies Dimensions / Weig hts Mod el HL- 5240 HL- 5250DN Medi a typ es Multi-p urpose tra y Plain paper, Bond paper, Rec ycled pap er, Enve lopes, Labels , Transpa rencies 1 , Thin paper , Thick paper, T hicker p[...]

A. Appendix 104 Other 1 We do not r ecommend Toner Save for printing Photo or Gray S cale images. System Requirements 1 USB is not s upported under Windows ® 95 or Windows NT ® 4.0. 2 Download the printer driver for Windows ® XP Professional x64 Edition from http://solutions.brother.com . 3 Power Macintosh with an Apple original pr e-installed U[...]

A. Appendix 105 Important inform ation for choosing your paper This sect ion gives information to help you c hoose paper to use wi th th is prin ter. Note If you use paper that is not recommended, a paper jam or misfeed may occur i n the printer. See Recommended paper on page 6. Before you buy a large quantity of paper Make sure t hat t he paper is[...]

A. Appendix 106 Print surface The characteri stics of the fac e side and reverse side of a sheet of paper may vary a litt le. Usually, the ope ning side of the ream of the paper package is t he print side. Follo w the indications on the paper package. Typical ly, the print si de is i ndicated b y an arrow. Moisture content Moisture cont ent is the [...]

A. Appendix 107 Paper size Paper si ze mm in. Letter 8.5 × 11 in. Legal 8.5 × 14 in. Execu tive 7.25 × 10 .5 in. A4 210 × 297 m m A5 148 × 210 m m A6 105 × 148 m m Envel ope Monar ch 3.875 × 7.5 in. Envel ope #9 3.875 × 8.9 in. Envel ope #10 4.12 × 9. 5 in. Envel ope #11 4.5 × 10. 375 in. Envel ope DL 110 × 220 m m Envel ope C5 162 × 22[...]

A. Appendix 108 Symbol and chara cter s ets For the HP LaserJet, IBM Propri nter XL, and EPSON FX-850 emulation modes, you can choo se the symbol and character set s using a web browser or the Remote Printe r Console software . How to use the web browser To use the web browser, foll ow the steps below. a Enter [ht tp://printer ’s IP address /] in[...]

A. Appendix 109 Symbol and character se ts li st OCR symbol sets When you choose the OCR-A or OCR-B font, the matching symbol set is always used. OCR A (0O) OCR B (1O) HP LaserJet mode ABICOMP Brazil / Portugal (13P) ABICOMP Internation al (14P) Desktop (7J) Greek8 (8G) HP German (0G) HP Spanish ( 1S) ISO Latin1 (0N) ISO Latin2 (2N) ISO Latin5 (5N)[...]

A. Appendix 110 Roman9 (4U) Roman Extension (0E) Russian-GOST (12R) Symbol (19M) Turkish 8 (8T) Ukra inian (14R) Ventura Math (6M) Ventura Intl (13J) Ventura US (14J) Windows 3.0 (9U) Windows Baltic (19L) W indows Cyrill ic (9R) Windows Greek ( 9G) Windows Latin1 ( 19U) Windows Latin2 (9E) Windows Latin5 (5T) Wingdings (579L) IBM mode PC8 PC8 D/N P[...]

A. Appendix 111 Quick re fere nce for ba r code cont rol commands The printe r can pr int bar co des in the HP L aserJet, EPSON FX-850, and I BM Proprint er XL emulation m odes. Print bar codes or expanded characters Format: ESC i n ... n Creates bar codes or expande d character s according to the segment of parameters ‘n ... n’. For more inf[...]

A. Appendix 112 This parameter select s the bar code mode as shown above. When n is ‘t5’ or ‘T5’ the bar code mode (EAN 8, EAN 13, or UPC A) varies according to the number of charact ers in the data. Bar Code, expande d character, l ine block drawing and box dr awing This parameter choos es the bar code style as above. When the EAN 8, EAN 1[...]

A. Appendix 113 Bar code hum an readable li ne ON or OFF This parameter shows whether th e printer prints the human readable li ne below the bar code. Human readable c haracters a r e alwa ys printe d with OCR-B f ont of 1 0 pitch and all t he current characte r style enhancements ar e masked. The default sett ing is determined by the ba r code mod[...]

A. Appendix 114 Bar code, ex panded character, line bl ock dra wing and box drawing hei ght n = ‘hnnn’, ‘Hnnn’ , ‘dnnn’, or ‘Dnnn’ 1 EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A), ISBN (UPC-E): 22 mm 2U P C - E : 1 8 m m 3 Others: 12 mm Expanded charac ters i 2.2 mm (preset) Line bloc k drawing an d box dr awing i 1 dot This paramet[...]

A. Appendix 115  When FIM (U S-Post Net) is sele cted with the parameter ‘t 3’ or ‘ T3’ Characters ‘A’ to ‘D’ are valid and one digit of data can be printed. Upper -case and lower-case alphabet characters can be accepted.  When Post Net (US-Post Net) is sel ected with the parameter ‘ t4’ or ‘T4’ Numbers ‘0’ t o ‘[...]

A. Appendix 116  When EAN 128 set A, set B or set C is selected with the parameter ‘t132’ or ‘T132’, ‘t 133’ or ‘T133’ or ‘t 134’ or ‘T134’ The same rules apply as for ‘ t12’ or ‘T12’, ‘t13’ or ‘T13’, or ‘ t14’ or ‘T14’. Box drawing ESC i ... E (or e) ‘E’ o r ‘e’ is a term inato r. Line blo[...]

A. Appendix 117 'Code 128 set B LPRINT CHR$(27);"it13r1o0x00y140bCODE1 28B12345?"; 'Code 128 set C LPRINT CHR$(27);"it14r1o0x00y160b";CHR $(1);CHR$(2);"?"; 'ISBN(EAN) LPRINTCHR$(27);"it130r1o0x00y180b12345 6789012?+12345"; 'EAN 128 set A LPRINT CHR$(27);"it132r1o0x00y210b1234 56789[...]

118 B Brother Numbers IMPORTANT For technical and operat ional help, you must cal l the country where you bought the print er. Calls must be made from w ithin that country. Register your product By registeri ng your Brother produ ct, you will be recorded as the or iginal own er of the product. Your registrat ion with Brother:  may serve as a con[...]

B. Appendix (For Euro pe and O ther Coun tries) 119 Important informati on: Regul ations Radio interference (220 to 240 volt model only) This pri nter fol lows EN55022 ( CISPR Publi cation 22 )/Class B. Before you use this pro duct, make sure tha t you use one of the followin g interface cables. 1 A shielded para llel inte rface cable wit h twisted[...]

B. Appendix (For Euro pe and O ther Coun tries) 120 Internal lase r radi ation Maximum radiation power : 5 mW Wave length: 770 - 810 nm Laser class : Class 3B[...]

B. Appendix (For Euro pe and O ther Coun tries) 121 IMPORTA NT - For Your Safety To ensure saf e operati on, the supplied t hree-pin p lug must be i nserted onl y into a standard three-pin po w er outlet that is properly grou nded through the standar d electrical wiring. Extension cords us ed with t his pr inter must be th ree-pin pl ug type an d c[...]

B. Appendix (For Euro pe and O ther Coun tries) 122 EC Declaration of Co nformity[...]

123 C Brother Numbers IMPORTANT For technical and operat ional help, you must cal l the country where you bought the print er. Calls must be made from w ithin that country. Register your product By register ing your produ ct with Brother Inte rnatio nal Corporation, you will be r ecorded as the ori ginal owner of the product. Your registrat ion wit[...]

C. Appe ndix (For USA a nd Cana da) 124 Customer Service If you have comments or suggest ions, please wri te us at: Service center locat or (USA only) For the locati on of a Brother authori zed service center , call 1-800-284-4 357. Service center locat ions (Canada only) For the locati on of a Brother authori zed service center , call 1-877-BROTHE[...]

C. Appe ndix (For USA a nd Cana da) 125 Important informati on: Regul ations Federal Comm unications Commis sion (FCC) Declaration of Conformity (For USA) declares, that t he products complies with Par t 15 of the FCC Rul es. Operati on is subject to the fol lowing two con ditions: (1) This devi ce may not cause harmful interf erence, and (2) thi s[...]

C. Appe ndix (For USA a nd Cana da) 126 Industry Canada Compliance Statement (For Canada) This Class B digital apparatus complies wit h Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.[...]

C. Appe ndix (For USA a nd Cana da) 127 Laser Notice s Laser Safety (110 to 120 volt model only) This print er is cert ified as a Clas s 1 laser pr oduct under the U. S. Department of Heal th and Human Services (DHHS) Radiation Perfor mance Standard accordin g to the Radiation Contr ol for Health and Safet y Act of 1968. This means th at the printe[...]

C. Appe ndix (For USA a nd Cana da) 128 IMPORTA NT - For Your Safety To ensure saf e operati on, the supplied t hree-pin p lug must be i nserted onl y into a standard three-pin po w er outlet that is properly grou nded through the standar d electrical wiring. Extension cords us ed with t his pr inter must be th ree-pin pl ug type an d correctly wir[...]

Index 129 D A Access ories tab ......................... ............. ................... 32 Advanc ed tab ......... ................... ................... ............. 27 Automati c duplex printin g .......... ................... ............. 22 Automa tic Emu lation Se lection .............. ................... 43 Automati c Interface Se lect[...]

D. Index 130 O OPC drum ....... ................... ............. .................... ...... 93 Options ...... ............. ................... ................... ............. 56 P Paper . .................... ................... ............. ............. 5 , 105 Paper h andling ....... ............ .................... ................. 1 02[...]