Canon ZR90, ZR85, ZR80 Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 153 Seiten
- 4.13 mb
Zur Seite of 153
Ähnliche Gebrauchsanleitungen
-
Camcorder
Canon M33
70 Seiten -
Camcorder
Canon Legria HF37
222 Seiten 8.26 mb -
Camcorder
Canon E 230
92 Seiten 5.59 mb -
Camcorder
Canon Legria HF-R77
308 Seiten 3.6 mb -
Camcorder
Canon LEGRIA HF R87
342 Seiten 3.84 mb -
Camcorder
Canon MV700
151 Seiten 5.41 mb -
Camcorder
Canon 5253B002
2 Seiten 1.09 mb -
Camcorder
Canon E 600
96 Seiten 6.7 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Canon ZR90, ZR85, ZR80 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Canon ZR90, ZR85, ZR80, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Canon ZR90, ZR85, ZR80 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Canon ZR90, ZR85, ZR80. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Canon ZR90, ZR85, ZR80 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Canon ZR90, ZR85, ZR80
- Den Namen des Produzenten und das Produktionsjahr des Geräts Canon ZR90, ZR85, ZR80
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Canon ZR90, ZR85, ZR80
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Canon ZR90, ZR85, ZR80 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Canon ZR90, ZR85, ZR80 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Canon finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Canon ZR90, ZR85, ZR80 zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Canon ZR90, ZR85, ZR80, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Canon ZR90, ZR85, ZR80 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
Digital Video Camcorder Instruction Manual Camescope vidéo numérique Manuel d’instruction Videocámara digital Manual de Instrucciones English Françai s Español NTSC PUB.DIM-618 Mini Digital Video Cassette Please read also the following instruction manuals. V euillez lire aussi les modes d’emploi suivants. Lea también los manuales de instr[...]
-
Seite 2
2 Introduction E Important Usage Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Digital Video Camcorder , ZR90/ZR85/ZR80 systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer[...]
-
Seite 3
3 Introduction E IMPOR T ANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon Digital Video Camcorder ZR90/ZR85/ZR80 A and all its accessories. 1. Read Instructions — All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions — The safety and operati[...]
-
Seite 4
4 14. Lightning — For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna. This will prevent damage to the product due to lightning and power -line surges. 15. Overloading — Do not overload wall outlets and ext[...]
-
Seite 5
5 Introduction E Using this Manual Thank you for purchasing the Canon ZR90/ZR85/ZR80. Please read this manual carefully before you use the camcorder and retain it for future reference. Change the display language before you begin ( 76). Symbols and References Used in This Manual ❍ : Precautions r elated to the camcorder operation. ❍ : Additiona[...]
-
Seite 6
6 T able of Contents Introduction Important Usage Instructions ........................................................................................2 Important Safety Instructions ........................................................................................3 Using this Manual ...........................................................[...]
-
Seite 7
7 Introduction Other Functions Customizing the Camcorder ........................................................................................75 Changing the Display Language ................................................................................76 Changing the Remote Sensor Mode ................................................77 Other [...]
-
Seite 8
8 Checking Supplied Accessories The serial number of this product can be found on the underside of the viewfinder . Write down the number and other information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase: Model Name: ZR90/ZR85/ZR80 A Purchased From: Serial No.: Dealer Add[...]
-
Seite 9
9 Introduction E Components Guide ZR90/ZR85/ZR80 Memory card slot* ( 92) (self-timer) button ( 58) / DATA CODE button ( 70) REC SEARCH + button ( 28) / (fast forward) button ( 34) / CARD + button* ( 106) FOCUS button ( 52) / (play/pause) button ( 33) REC SEARCH – button ( 28) / (record review) button ( 28) / (rewind) button ( 33) / CARD – butto[...]
-
Seite 10
10 b Using a memory card Using a tape TAPE/CARD switch*( 5) Dioptric adjustment lever ( 18) Strap mount ( 19) Power switch ( 5) Grip belt ( 18) PHOTO button ( 29, 96) Accessory shoe ( 145) Zoom lever ( 30) Viewfinder ( 18) Viewfinder protect cover ( 135) Cassette compartment ( 16) Cassette compartment cover ( 16) Strap mount ( 19) Serial number Sta[...]
-
Seite 11
11 Introduction E S DV Stereo microphone ( 60) Remote sensor*( 20) DV terminal ( 80, 91) S-video terminal**( 37) AV terminal ( 36) / (phones) terminal ( 35, 61) USB terminal*( 118, 120) Assist lamp (White LED)** ( 49) Terminal cover Bottom view Tripod socket ( 32) OPEN/EJECT 5 switch ( 16) Terminal cover * ZR90/ZR85 only . ** ZR90 only .[...]
-
Seite 12
12 WT WIRELESS CONTROLLER WL - D82 START /STOP PHOTO ZOOM SELF T. D.EFFECTS ON/OFF SET MENU TV SCREEN REW PAUSE AV INSERT AV DV REMOTE SET SLOW 2 PLAY STOP FF ZERO SET MEMORY REC PAUSE 12bit AUDIO OUT SEARCH SELECT DATA CODE AUDIO DUB. SLIDE SHOW CARD Zoom buttons ( 30) Select buttons ( 39) PHOTO button ( 29, 96) START/STOP button ( 24, 101) SELF T[...]
-
Seite 13
13 Basic Functions - Preparations E Preparing the Power Supply Attaching the Battery Pack 1. T ur n the POWER switch to OFF . 2. Move the viewfinder upward. 3. Attach the battery pack to the camcorder . • Remove the terminal cover of the battery pack. • Press lightly and slide it in the dir ection of the arrow until it clicks. Charging the Batt[...]
-
Seite 14
14 Using a Household Power Source 1. T ur n the POWER switch to OFF . 2. Connect the power cord to the power adapter . 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’ s DC IN terminal. ❍ T urn off the camcorder befor e connecting or disconnecting the power adapter . ❍ If the adapter is used close to [...]
-
Seite 15
15 Basic Functions - Preparations E • Charge the battery pack in temperatures between 41 ºF and 104 ºF (5 ºC and 40 ºC). • A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging. • We r ecommend that you prepare battery packs 2 to [...]
-
Seite 16
16 Loading/Unloading a Cassette Use only videocassettes marked with the D logo. 1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover . The cassette compartment opens automatically . 2. Load/unload the cassette. • Load the cassette with the window facing the grip belt. • Unload the cassette by pulling it straight out. [...]
-
Seite 17
17 Basic Functions - Preparations E Installing the Backup Battery The backup battery allows the camcorder to retain date, time ( 21) and other camcorder settings while the power source is disconnected. Power the camcorder from a household power source when replacing the backup battery to retain the settings. 1. Open the backup battery cover . 2. In[...]
-
Seite 18
18 Preparing the Camcor der Adjusting the Viewfinder (Dioptric Adjustment) 1. T ur n on the camcorder and keep the LCD panel closed. 2. Pull out the viewfinder . 3. Adjust the diopter adjustment lever . Attaching the Lens Cap 1. Attach the cord to the lens cap. 2. Pass the grip belt through the loop with the metal fitting on the cord. Press the but[...]
-
Seite 19
19 Basic Functions - Preparations E Attaching the Shoulder Strap Pass the ends through the strap mount and adjust the length of the strap. Mounting the Wide Attachment The WA-30.5 Wide Attachment gives you a wide perspective for indoor shots or panoramic views (0.6 × ). The wide attachment is for use at maximum wide-angle. Screw the wide attachmen[...]
-
Seite 20
20 Using the Wireless Contr oller Point it at the camcorder’ s remote sensor when you press the buttons. Inserting Batteries The wireless controller operates with two AA (R6) batteries. 1. Open the battery cover . 2. Insert the batteries following the + and – markings. Replace both batteries. 3. Close the battery cover . ❍ Camcorder and wir e[...]
-
Seite 21
21 Basic Functions - Preparations E ( 39) Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder , or when you have replaced the backup battery . Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu. 2. T ur n the SET dial to select [SYSTEM] and press the SET d[...]
-
Seite 22
22 7. Press the MENU button to close the menu and to start the clock. Once you have set time zone, date and time, you do not need to reset the clock each time you travel to another time zone. Just set the time zone to the one of your destination, and the camcorder automatically adjusts the clock. 1 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19[...]
-
Seite 23
23 Basic Functions - Preparations E Displaying Date and Time during Recording Y ou can display the date and time in the lower left corner of the screen. 1. Press the MENU button to open the menu. 2. T ur n the SET dial to select [DISPLA Y SETUP/ ] and press the SET dial. 3. T ur n the SET dial to select [D/T DISPLA Y] and press the SET dial. 4. T u[...]
-
Seite 24
24 Recording Movies on a T ape Before Y ou Begin Recording Make a test recording first to check if the camcorder operates correctly . Before you make important recordings, clean the video heads ( 135). Recording 1. Remove the lens cap. 2. Set the camcorder to CAMERA mode. • Set the POWER switch to CAMERA and the T APE/CARD switch to b . • Set t[...]
-
Seite 25
25 Basic Functions - Recording E ❍ W ait until the tape counter stops completely before you start recor ding. ❍ When you do not remove the cassette, you can r ecord the next scene without producing any noise or blank sections between the r ecordings even if you turn the camcorder of f. ❍ Bright light may make it difficult to use the LCD scr e[...]
-
Seite 26
26 2. T ur n the SET dial to select [DISPLA Y SETUP/ ] and press the SET dial. 3. T ur n the SET dial to select [LCD MIRROR] and press the SET dial. 4. T ur n the SET dial to select [OFF]. 5. Press the MENU button to close the menu. When [LCD MIRROR] is set to [ON], only tape (ZR90/ZR85: or card) operation and self-timer displays appear on the LCD [...]
-
Seite 27
27 Basic Functions - Recording E Screen Displays during Recor ding t Recording r eminder r When j flashes q Time code w Remaining tape e Remaining battery charge The camcorder counts fr om 1 to 10 seconds when you start recor ding. This is helpful to avoid scenes that are too short. Indicates the recor ding time in hours, minutes and seconds. Indic[...]
-
Seite 28
28 Searching and Reviewing when Recor ding Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly . Press and r elease the c (recor d review) button. The camcorder r ewinds the tape, plays back the last few seconds, and returns to recor d pause mode. Re[...]
-
Seite 29
29 Basic Functions - Recording E Recording Still Images on a T ape 1. Open the menu and select [CAMERA SETUP]. Select [PHOTO REC], confirm that [T APE b ] is selected and close the menu. 2. Press the PHOTO button halfway . • F appears in green. If it does not appear in gr een, adjust the focus with the SET dial. • Exposure is locked. • When y[...]
-
Seite 30
30 Zooming The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom. Optical Zoom Move the zoom lever toward W to zoom out (wide- angle). Move it toward T to zoom in (telephoto). Press the zoom lever slightly for a slow zoom. Pr ess harder for a faster zoom. Y ou can [...]
-
Seite 31
31 Basic Functions - Recording E Digital Zoom 1. Press the MENU button to open the menu. 2. T ur n the SET dial to select [CAMERA SETUP] and press the SET dial. 3. T ur n the SET dial to select [D.ZOOM] and press the SET dial. 4. T ur n the SET dial to select a setting option. 5. Press the MENU button to close the menu. ❍ Digital zoom cannot be u[...]
-
Seite 32
32 Tips for Making Better Videos Holding the Camcorder For maximum stability , grip the camcorder in your right hand and keep your right elbow pressed against your body . If necessary , support the camcorder with your left hand. Be careful that your fingers do not touch the microphone or lens. For More Stability Lighting When recording outdoors, we[...]
-
Seite 33
33 Basic Functions - Playback E Playing Back a T ape If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette ( 135). 1. Set the camcorder to PLA Y (VCR) mode. • Set the POWER switch to PLA Y (VCR) and the T APE/CARD switch to b . • Set the [...]
-
Seite 34
34 Special Playback Modes e / a (Playback Pause) T o pause playback, press the e / a button during normal playback. 1 (Fast Forward Playback) / ` (Rewind Playback) Plays back the tape at 9.5 times normal speed (forward or reverse). Press and hold the button during normal playback or fast forward. – / 4a (Reverse Playback) Press the button on the [...]
-
Seite 35
35 Basic Functions - Playback E Adjusting the V olume When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker . The built-in speaker does not sound when you close the LCD panel. When Using Headphones The headphones terminal also serves as A V terminal. Headphones can only be used when " H " is dis[...]
-
Seite 36
36 Playing Back on a TV Screen The A V terminal also serves as headphones terminal. When " H " is displayed on the screen, change the setting following the procedure below . Open the menu and select [VCR SETUP]. Select [A V/PHONES H ], set it to [A V] and close the menu. TVs with Audio/Video T erminals Refer also to the TV or VCR instruct[...]
-
Seite 37
37 Basic Functions - Playback E TVs with S (S1)-Video Input T erminal Refer also to the TV or VCR instruction manual. 1. T ur n off all devices befor e starting the connections. 2. Connect the S-150 S-video Cable (optional) to the S-video terminals. 3. Connect the STV -250N Stereo Video Cable to the camcorder’ s A V terminal and the audio termina[...]
-
Seite 38
38 Selecting the Audio Output Channel Y ou can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. T ur n the SET dial to select [AUDIO SETUP] and press the SET dial. 3. T ur n the SET dial to select [OUTPUT CH] and press the SET dial. 4. T ur n the SET dial to selec[...]
-
Seite 39
39 Advanced Functions E Menus and Settings Many of the camcorder’ s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Press the MENU button to open the menu. 2. T ur n the SET dial to select a submenu and press the SET dial. 3. T ur n the SET dial to select a menu item and press the SET dial. 4.[...]
-
Seite 40
40 Submenu Menu Item Setting Options CARD MIX* MIX TYPE CARD CHROMA , CARD LUMI., 111 CAM. CHROMA, C. ANIMATION ANIMAT. TYPE CORNER , STRAIGHT, RANDOM MIX LEVEL CAMERA SETUP SHUTTER AUTO , 1/60, 1/100, 1/250, 1/500, 1/1000, 56 1/2000 D. ZOOM ZR90 ZR85 ZR80 31 OFF, 88 × , 440 × OFF, 80 × , 400 × OFF, 72 × , 360 × A.SL SHUTTER ON , OFF 57 IMG[...]
-
Seite 41
41 Advanced Functions E Submenu Menu Item Setting Options MY CAMERA S-UP IMAGE** ON , OFF 75 S-UP SOUND 75 SHTR SOUND* OPER. SOUND SELF-T SOUND ZR90/ZR85: OFF, DEFAULT , MY SOUND1, MY SOUND2 ZR80: OFF, PATTERN1 , PATTERN2, PATTERN3 * ZR90/ZR85 only . ** ZR80 only .[...]
-
Seite 42
42 PLA Y (VCR) MENU CARD CAMERA CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options VCR SETUP REC MODE SP, LP 59 AV/PHONES H AV , PHONES H 35 AV DV OUT ON, OFF 84 AUDIO SETUP OUTPUT CH L/R , L/L, R/R 38 AUDIO DUB.* AUDIO IN , MIC. IN 88 WIND SCREEN* ON, OFF 60 AUDIO MODE 16bit, 12bit 60 12bit AUDIO STEREO1 , STEREO2,MIX/FIXED, MIX/VA[...]
-
Seite 43
43 Advanced Functions E Submenu Menu Item Setting Options MY CAMERA S-UP IMAGE** ON , OFF 75 S-UP SOUND 75 SHTR SOUND* OPER. SOUND SELF-T SOUND ZR90/ZR85: OFF, DEFAULT , MY SOUND1, MY SOUND2 ZR80: OFF, PATTERN1 , PATTERN2, PATTERN3 * ZR90/ZR85 only . ** ZR80 only .[...]
-
Seite 44
44 CARD CAMERA MENU CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options CAMERA SETUP SHUTTER AUTO , 1/60, 1/100, 1/250 56 D.ZOOM ZR90 ZR85 31 OFF , 88 × OFF , 80 × WHITE BAL. AUTO , SET W , INDOOR T , OUTDOOR U 54 FOCUS PRI. ON , OFF 103 NIGHT MODE NIGHT, NIGHT+ , S.NIGHT 49 SKIN DETAIL SOFT, NORMAL 50 REVIEW OFF, 2sec , 4[...]
-
Seite 45
45 Advanced Functions E CARD PLA Y MENU CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA Submenu Menu Item Setting Options CARD COPY [ ] CANCEL , EXECUTE 116 OPERATIONS (Single Image PRINT ORDERS NO ,YES 127 Display) ALL ERASE IMAGE ERASE CANCEL , SINGLE, ALL 110 FORMAT CANCEL , EXECUTE 117 CARD PROTECT 109 OPERATIONS (Index Screen) PRINT ORDER 126 [...]
-
Seite 46
46 Using the Recording Pr ograms Easy Recording Pr ogram The camcorder adjusts focus, exposure and other settings automatically , allowing you to just point and shoot. Program AE Modes Auto The camcorder adjusts focus, exposure and other settings automatically . However , you have the option of adjusting the settings manually . Sports Use this mode[...]
-
Seite 47
47 Advanced Functions - Recording E A vailability of Functions in Each Mode: A: Auto setting h : A vailable × : Not available Shaded area: Can be used only in CAMERA mode. * ZR90/ZR85 only . Selecting the Easy Recording Pr ogram Set the program selector to [ . [ appears. CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA Recording Program Digital Zoom h Im[...]
-
Seite 48
48 Selecting the Program AE Mode 1. Set the program selector to Q . 2. Press the SET dial. A list of the program AE modes appears. 3. Select a mode and press the SET dial. The symbol of the mode appears on the upper left corner of the screen. ❍ The setting resets to the Auto mode when you change the position of the program selector . ❍ Do not c[...]
-
Seite 49
49 Advanced Functions - Recording E Using the Night Modes 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SETUP]. Select [NIGHT MODE], select a setting option and close the menu. 3. Press the NIGHT MODE button. • The symbol of the selected mode appears on the screen. • Pressing the NIGHT MODE button again r esets the camc[...]
-
Seite 50
50 Skin Detail Function The camcorder detects skin tones and adjusts the picture for a more smooth and natural appearance of the skin area. Open the menu and select [CAMERA SETUP]. Select [SKIN DET AIL], set it to [SOFT] and close the menu. ❍ Skin detail function cannot be used when the program selector is set to [ . ❍ T o obtain the best ef fe[...]
-
Seite 51
51 Advanced Functions - Recording E Adjusting the AE Shift Y ou can adjust the AE (auto exposure) function to lighten or darken the image. This allows you to compensate for backlit or overexposed scenes. Available Levels: –2 to +2, in 0.25 intervals (excluding –1.75 and +1.75). 1. Set the program selector to Q . 2. Set the program AE mode to Au[...]
-
Seite 52
52 Adjusting the Focus Manually Autofocus may not work well on the following subjects. In such case, focus manually . 1. Set the program selector to Q . 2. Adjust the zoom. When you operate the zoom after adjusting the focus, the subject may not stay in focus. Adjust the zoom before the focus. 3. Press the FOCUS button. “MF” appears. 4. T ur n [...]
-
Seite 53
53 Advanced Functions - Recording E ❍ The setting resets to autofocus when you switch the pr ogram selector to [ . ❍ Readjust the focus when you have turned off the camcorder . Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the FOCUS button mor e than 2 seconds after step 2 in A[...]
-
Seite 54
54 Setting the White Balance Y ou can use the preset modes to reproduce colors more accurately , or set a custom white balance to obtain the optimal setting. 1. Set the program selector to Q . 2. For custom white balance: Point the camcorder at a white object and zoom in until it fills the whole screen. Keep the camcorder zoomed at the white object[...]
-
Seite 55
55 Advanced Functions - Recording E ❍ Use the auto setting for normal outdoor scenes. ❍ When the program selector is set to [ , white balance is pr eset to [AUTO]. ❍ The camcorder r etains the custom white balance setting even if you tur n it off. ZR90/ZR85: However , it resets to [AUTO] when you change the position of the T APE/CARD switch. [...]
-
Seite 56
56 Setting the Shutter Speed Y ou can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the (Auto) mode. 3. Open the menu and select [CAMERA SETUP]. 4. Select [SHUTTER]. 5. Select the shutter speed and press the SET dial. 6. Close the menu. ❍ If the shu[...]
-
Seite 57
57 Advanced Functions - Recording E Auto Slow Shutter In Easy Recording mode and when [SHUTTER] is set to [AUTO] in Auto mode, the camcorder uses shutter speeds down to 1/30. This allows you to record brightly in places with insufficient lighting. However , you can set the camcorder not to use the slow shutter speed of 1/30. Open the menu and selec[...]
-
Seite 58
58 Using the Self-Timer The self-timer can be used for recording movies and still images. When recor ding movies 1. Press the (self-timer) button. “ ” appears. 2. Press the start/stop button. • The camcorder starts r ecording after a 10-second countdown (ZR90/ZR85: 2 seconds when using the wireless contr oller). The count down appears on the [...]
-
Seite 59
59 Advanced Functions - Recording E Changing the Recording Mode (SP/LP) Y ou can choose between SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times. T o change to LP mode, open the menu and select [VCR SETUP]. Select [REC MODE], set it to [LP] and close the menu. ❍ T apes r ecorded in LP mode cannot be used for audio dub[...]
-
Seite 60
60 Audio Recording Changing the Audio Mode Y ou can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later . Select the 16-bit mode for higher sound quality . Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], set it to [1[...]
-
Seite 61
61 Advanced Functions - Recording E Using Headphones during Recording The headphones terminal also serves as A V terminal. Headphones can only be used when " H " is displayed on the screen. If not, change the setting following the procedure below . Open the menu and select [VCR SETUP]. Select [A V/PHONES H ], set it to [PHONES H ] and clo[...]
-
Seite 62
62 The image gradually fades in. The image gradually fades out. Using Digital Effects Faders ( 65) Begin or end scenes with a fade to or from black. Fade T rigger (F ADE-T) The image begins as a vertical line in the center and expands sideways until it fills the whole screen. The image is wiped off from the sides of the screen. Wipe (WIPE) The imag[...]
-
Seite 63
63 Advanced Functions - Recording E The image appears in zigzag from the top of the screen. Black stripes appear in zigzag from the bottom of the screen until they cover the whole image. Zigzag (ZIGZAG) The screen turns yellow , forms a beam that becomes thinner and the image appears. A yellow beam appears in the center of the screen and expands un[...]
-
Seite 64
64 Multi-Image Screen ( 67) Captures moving subjects in 4, 9 or 16 sequences of still images and displays them at one time. Sound will be recorded normally . 9 Sequences 4 Sequences 16 Sequences Effects ( 66) Add flavor to your recordings. Art (ART) The image becomes like a paint (solarization). Black and White (BLK & WHT) The image becomes bla[...]
-
Seite 65
65 Advanced Functions - Recording E Selecting a Fader In CAMERA mode, set the program selector to Q . 1. Press the DIGIT AL EFFECTS button. [D.EFFECTS | ], [F ADER], [EFFECT] and [MUL TI-S] appear . 2. Select [FADER]. 3. Select the fader option. 4. Press the DIGIT AL EFFECTS button. The name of the selected fader flashes. CAMERA mode: 5. Fade in: I[...]
-
Seite 66
66 Selecting an Effect in CARD CAMERA Mode 1. Press the DIGIT AL EFFECTS button. “BLK&WHT” flashes. 2. Press the ON/OFF button. • “BLK&WHT” stops flashing. • The effect can be activated/deactivated by pr essing the ON/OFF button. CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA DIGITAL EFFECTS ON/OFF Selecting an Effect In CAMERA mode,[...]
-
Seite 67
67 Advanced Functions - Recording E Using the Multi-Image Screen Y ou can operate the multi-image screen only in the following playback modes: - When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback - When [S.SPEED] is set to [FAST], [MOD.] or [SLOW]: Playback pause In CAMERA mode, set the program selector to Q . 1. Press[...]
-
Seite 68
68 10 . Press the start/stop button to begin recor ding. The multi-image screen is r ecorded on the tape. ❍ T urn off the digital effect when you do not use it. Press the DIGIT AL EFFECTS button to open the menu. Select [D.EFFECTS | ] and press the DIGIT AL EFFECTS button. ❍ The camcorder r etains the setting even if you tur n it off or change [...]
-
Seite 69
69 Advanced Functions - Playback E Magnifying the Image The playback image can be magnified up to 5 times. 1. Move the zoom lever toward T . • The image is magnified by 2 times. • A frame appears indicating the position of the magnified area. • T o further enlarge the image, move the zoom lever toward T . T o shrink the image below 2 times ma[...]
-
Seite 70
70 Displaying the Data Code The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). When you play back a tape, you can display the data code and select the data code combination you wish to display . Selecting the Date/Time Display Combination Open the menu and select[...]
-
Seite 71
71 Advanced Functions - Playback E Displaying the Data Code Press the DA T A CODE button. ❍ The data code display turns off when you turn the camcorder off. ❍ Only date and time appear in CARD PLA Y mode. Six-Second Auto Date Date and time appear for 6 seconds when you begin playback, or to indicate that date or time zone has changed. Open the [...]
-
Seite 72
72 End Search When you have played back a tape, you can use this function to locate the end of the last recorded scene. In stop mode, press the END SEARCH button. • "END SEARCH" appears. • The camcorder rewinds/fast forwar ds the tape, plays back the last few seconds of the recor ding and stops the tape. • Pressing the button again [...]
-
Seite 73
73 Advanced Functions - Playback E Returning to a Pre-marked Position If you wish to return to a particular scene later , mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. This function is operated with the wireless controller . 1. Press the ZERO SET MEMOR Y button at the point you w[...]
-
Seite 74
74 Photo Search/Date Sear ch Y ou can search for a still image recorded anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function. This function is operated with the wireless controller . 1. Press the SEARCH SELECT button to choose between photo search and date sear ch. “PHOTO SE[...]
-
Seite 75
75 Advanced Functions - Other Functions E Customizing the Camcorder Y ou can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter*, operation and self-timer (collectively called the My Camera settings). * ZR90/ZR85 only . Changing the My Camera Settings 1. Open the menu and select [MY CAMERA]. 2.[...]
-
Seite 76
76 Changing the Display Language The language used in the camcorder displays and menu items can be changed to German, Spanish, French, Italian, Russian, Simplified Chinese or Japanese. T o change the display language, open the menu and select [DISPLA Y SETUP/ ]. Select [LANGUAGE ], select a language and close the menu. If you have mistakenly change[...]
-
Seite 77
77 Advanced Functions - Other Functions E Changing the Remote Sensor Mode T wo remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby . T ur ning the Remote Sensor Off Open the menu and select [SYSTEM]. Select [WL. REMOTE], set it to [OFF B ] and close the menu. “ B “[...]
-
Seite 78
78 Other Camcorder Settings Beep Y ou will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, and unusual conditions of the camcorder . If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off. T o tur n the beep off, open the menu and select [SYSTEM].[...]
-
Seite 79
79 Advanced Functions - Other Functions E T ur ning Off the Image Stabilizer The image stabilizer compensates for camcorder shake even at full telephoto. The image stabilizer tries to compensate horizontal movements, therefore, we recommend turning off the image stabilizer when you mount the camcorder on a tripod. Open the menu and select [CAMERA S[...]
-
Seite 80
80 Recording to a VCR or Digital V ideo Device Y ou can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality . Connecting the Devices q Connecting a VCR See Playing Back on a TV Screen ( 36). w [...]
-
Seite 81
81 Editing ❍ When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original. ❍ When connecting a digital video device: - If the picture does not appear , reconnect the DV cable or turn the camcorder off and back on again. - Proper operation cannot be guaranteed for all digital video devices equipped with [...]
-
Seite 82
82 Recording fr om Analog Video Devices (VCR, TV or Camcorder) Y ou can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder . 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen ( 36). 2. Set the camcorder to PLA Y (VCR) mode and load a blank cassette. 3. Connected device: Load t[...]
-
Seite 83
83 Editing E Recording fr om Digital Video Devices (DV Dubbing) Y ou can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality . 1. Connect the camcorder to the digital video device. See Connecting a Digital Video Device ( 80). 2. Set the camcorder to PLA Y (VCR) mode and load a blan[...]
-
Seite 84
84 Converting Analog Signals into Digital Signals (Analog-Digital Converter) By connecting the camcorder to a VCR or 8mm video camcorder , you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as output terminal only . Connecting the Devices T urn off all devices bef[...]
-
Seite 85
85 Editing T ur ning On the Analog-Digital Converter Open the menu and select [VCR SETUP]. Select [A V DV OUT], set it to [ON] and close the menu. ❍ Headphones cannot be used during analog-digital conversion. ❍ Depending on the signal sent from the connected device, the conversion fr om analog to digital signals might not work properly (e.g.,[...]
-
Seite 86
86 Replacing Existing Scenes (A V Inser t) Y ou can insert and replace images and audio on the tape of the camcorder with images and audio from other video devices connected via A V terminal or DV terminal. This function is operated with the wireless controller . 1. Connect the camcorder to a video device. See Playing Back on a TV Screen ( 36). 2. [...]
-
Seite 87
87 Editing 6. Connected device: Play back the tape. 7. Press the P AUSE a button on the wireless controller when the scene you wish to insert appears. 8. Press the STOP 3 button on the wireless contr oller to stop inserting. Press the P AUSE a button on the wireless controller to pause inserting. 9. Connected device: Stop playback. ❍ Y ou cannot [...]
-
Seite 88
88 Audio Dubbing Y ou can add sound from audio devices (AUDIO IN) or with the built-in microphone (MIC. IN). This function is operated with the wireless controller . Connecting an Audio Device Refer also to the instruction manual of the connected device. Dubbing 1. Set the camcorder to PLA Y (VCR) mode and load a recor ded cassette. Use a tape reco[...]
-
Seite 89
89 Editing E 7. Press the STOP 3 button on the wireless contr oller to stop dubbing. Audio device: Stop playback. ❍ Use only tapes recor ded in SP mode 12-bit audio sound with this camcorder . Audio dubbing will stop if the tape has a blank section or a section recor ded in LP mode or 16-bit mode. ❍ Y ou cannot use the DV terminal for audio dub[...]
-
Seite 90
90 ❍ The camcorder r esets to [STEREO 1] when you tur n the camcorder of f. However , the mix balance is memorized by the camcorder . ❍ Y ou can also press the 12bit AUDIO OUT button on the wir eless controller to select the audio output. However , the mix balance can only be adjusted in the menu.[...]
-
Seite 91
91 Editing E Connecting to a Computer Using a DV (IEEE1394) Cable Y ou can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board. Optional software is required for transferring recordings from the tape to a computer . Refer to the instruction manual of the software. ❍ Operation may not work correctly d[...]
-
Seite 92
92 Inserting and Removing a Memor y Card Y ou can use SD Memory Cards or commercially available MultiMediaCards with this camcorder . The SD Memory Card has a protect switch to prevent accidental erasure. Inserting the Card 1. T ur n off the camcor der . 2. Open the cover . 3. Insert the memory card all the way into the memory card slot. 4. Close t[...]
-
Seite 93
93 Using a Memory Card E Selecting the Image Quality/Size Changing the Still Image Quality Y ou can choose between Superfine, Fine and Normal. Open the menu and select [CARD SETUP]. Select [IMG QUALITY], set it to [SUPER FINE] or [NORMAL] and close the menu. Changing the Still Image Size Y ou can choose between 1024 × 768 pixels and 640 × 480 pix[...]
-
Seite 94
94 Changing the Movie Size Y ou can choose between 320 × 240 pixels and 160 × 120 pixels. Open the menu and select [CARD SETUP]. Select [MOVIE SIZE], set it to [160 × 120] and close the menu. ❍ Movies are r ecorded in the Motion JPEG format. ❍ Maximum recor ding time on a 8MB SD Memory Card: CARD PLA Y CARD CAMERA PLA Y (VCR) CAMERA MOVIE SI[...]
-
Seite 95
95 Using a Memory Card E File Numbers Images are automatically assigned file numbers from 0101 to 9900 and stored in folders containing up to 100 images. Folders are assigned numbers from 101 to 998. (The sample images on the supplied memory card are saved in the [100canon] folder .) Y ou can choose to use consecutive file numbers (CONTINUOUS) or t[...]
-
Seite 96
96 Recording Still Images on a Memory Car d Y ou can record still images with the camcorder , from a tape in the camcorder or from devices connected via the DV terminal or A V terminal. Y ou can also record a still image on the memory card while you record a movie on the tape. 1. Set the camcorder to CARD CAMERA mode. A white focusing frame appears[...]
-
Seite 97
97 Using a Memory Card E ❍ T o use the self-timer ( 58), press the (self-timer) button before step 2 and press the PHOTO button fully . ❍ When the subject is too bright (overexposed), use the optional FS-30.5U ND filter . ❍ When the Focus-Priority mode is set to [ON]: When you press the PHOTO button fully befor e F and focusing frame turn gre[...]
-
Seite 98
98 Recording fr om a T ape in the Camcorder 1. Play back the tape. 2. Press the PHOTO button halfway when the scene you wish to recor d appears. • The camcorder pauses playback. The r emaining image capacity and other information appear . • When you press the PHOTO button on the wir eless controller , recording starts immediately . 3. Press the[...]
-
Seite 99
99 Using a Memory Card E When recor ding from a tape in the camcorder or other video devices: ❍ A still image recor ded from an image in 16:9 format will be vertically compressed. ❍ The data code of the still image will reflect the date and time it has been recor ded on the memory card. ❍ The size of the still image will be 640 × 480. Screen[...]
-
Seite 100
100 Reviewing a Still Image Right after Recording Y ou can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded. Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting option and close the menu. ❍ A still image is displayed as long as you hold the PHOTO button after recor ding. ❍ The FILE O[...]
-
Seite 101
101 Using a Memory Card E Recording Motion JPEG Movies on a Memory Car d Y ou can record Motion JPEG movies with the camcorder , from a tape in the camcorder or from devices connected via the DV terminal or the A V terminal. The sound of a movie recorded on a memory card will be monaural. 1. Press the start/stop button to begin recor ding. • Y ou[...]
-
Seite 102
102 Screen Displays during Movie Recor ding q " e " Card Access Display w Movie recor ding time e Image Size r Remaining Card Capacity for Movies Recording fr om Other Video Devices Y ou can record movies from devices connected via the S-video terminal or A V terminal (analog line-in function), or via the DV terminal on a memory card. For[...]
-
Seite 103
103 Using a Memory Card E Selecting the Focusing Point The subject you wish to record is not always in the center of the screen. In the Focus- Priority mode, you can choose from one of three focusing points to automatically put the subject you wish into sharp focus. When the program selector is set to [ , the Focus-Priority becomes set to ON (only [...]
-
Seite 104
104 Recording Panoramic Images (Stitch Assist Mode) Y ou can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer . When Recording in Stitch Assist Mode: PhotoStitch detects the overlapping portion of adjoining images and merges them. T ry to include a distinctive[...]
-
Seite 105
105 Using a Memory Card E 5. Record the second image so that it overlaps a portion of the first image. • Minor discrepancies in the overlapped area can be corr ected with the software. • Y ou can retake an image by pressing the CARD +/– button to r eturn to the previous image. • A maximum of 26 images can be recorded. 6. Press the button af[...]
-
Seite 106
106 Playing Back a Memory Card Y ou can display a single image, 6 at one time (index screen 107), or one after another (slide show 107). Use the Card Jump function to quickly locate an image without displaying them one by one ( 108). 1. Set the camcorder to CARD PLA Y mode. 2. Press the CARD +/– button to move between images. 3. T o play back a m[...]
-
Seite 107
107 Using a Memory Card E ❍ Images not recor ded with this camcorder , uploaded from a computer (except the sample images 113), edited on a computer and images whose file names have been changed may not be played back correctly . ❍ Do not turn off the camcorder , change the position of the T APE/CARD switch, disconnect the power source, open th[...]
-
Seite 108
108 Card Jump Function Y ou can locate images without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images. Press and hold the CARD + or CARD – button. When you release the button, the image of the displayed image number appears. CARD PLA Y CARD CAMER[...]
-
Seite 109
109 Using a Memory Card E Protecting Images Y ou can protect important images from accidental erasure when displaying a single image or index screen. If a memory card is formatted, all still images and movies, even pr otected ones, will be erased permanently . ❍ The sample images recor ded on the supplied SD Memory Card are alr eady protected. ?[...]
-
Seite 110
110 Erasing Images Y ou can erase images singly or all at once. Be careful when erasing images. Erased images cannot be r ecovered. ❍ Protected images cannot be erased. ❍ Movies can only be erased when the first scene is displayed as a still image. Erasing a Single Image 1. Select the image you wish to erase. 2. Press the SET dial to open the F[...]
-
Seite 111
111 Using a Memory Card E Combining Images (Card Mix) Y ou can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with the live video recording. Card Chr oma Key (CARD CHROMA) Combines fr[...]
-
Seite 112
112 Live video recording Card mix image Card Animation (C. ANIMA TION) Combines animations with your recordings. Y ou can choose from 3 types of card animation effects. • Corner: Animation appears on the upper left and the lower right cor ner of the screen. • Straight: Animation appears on the top and bottom of the screen and moves to the right[...]
-
Seite 113
113 Using a Memory Card E 5. Select the mix type matching the sample image you have selected. • The screen shows the combined image. • When you have selected [C. ANIMA TION], select [ANIMA T . TYPE] and select between [CORNER], [STRAIGHT] and [RANDOM]. 6. T o adjust the mix level, select [MIX LEVEL] and adjust it with the SET dial. 7. Close the[...]
-
Seite 114
114 Camera Chroma Key Card Animation The sample images recor ded on the supplied SD Memory Card are intended only for the personal use with this camcorder . Do not use these sample images for other purposes. If you have mistakenly erased the sample images on the supplied SD Memory Card, they can be downloaded fr om the homepage http://www .canondv [...]
-
Seite 115
115 Using a Memory Card E Copying Still Images Y ou can copy still images from tape to memory card, or from memory card to tape. All still images from the selected still image onward will be copied. Copying Still Images from T ape to Memory Card Insert a memory card with enough remaining capacity , and load a recorded cassette. 1. Locate the still [...]
-
Seite 116
116 Copying Still Images from Memory Car d to T ape Load a cassette with enough free space, and insert a recorded memory card. Make sure that the protect tab on the cassette is set to allow recording. 1. Select the first still image you wish to copy with the CARD +/– buttons. T o copy all still images fr om the memory card, select the first still[...]
-
Seite 117
117 Using a Memory Card E Formatting a Memor y Card Format new memory cards, or when you get the message “CARD ERROR”. Y ou can also format a memory card to erase all data recorded on it. ❍ Formatting a memory card erases all data, including pr otected images. ❍ Images erased by formatting cannot be recover ed. ❍ If you use a memory card [...]
-
Seite 118
118 Connecting to a Computer Using a USB Cable Y ou can download images from the memory card to a computer using the supplied USB cable. “PC CONNECT ” appears to indicate that the camcor der is connected to the computer via USB cable. ❍ Do not disconnect the USB cable, open the memory card cover , r emove the memory card, change the position [...]
-
Seite 119
119 Using a Memory Card E Creating a Start-up Image Y ou can create 2 start-up images using still images on the memory card. 1. Select a still image with the CARD +/– buttons. 2. Open the menu and select [MY CAMERA]. 3. Select [CREA TE ST ART -UP IMAGE]. [SET THIS AS ST AR T -UP IMAGE?], [YES] and [NO] appears. 4. Select [YES]. [SA VE AS MY IMAGE[...]
-
Seite 120
120 Printing Still Images Y ou can print still images by connecting the camcorder to a printer with Direct Print function. Y ou can also use the print order settings for direct printing ( 126). Following printers can be connected to your camcorder: Connecting the Printer to the Camcorder 1. T urn off the camcorder and insert a memory car d that con[...]
-
Seite 121
121 Direct Printing E ❍ Refer to the instruction manual of each printer for information on which interface cable to use with the camcorder . ❍ We r ecommend powering the camcorder from a household power sour ce. ❍ Refer also to the instruction manual of the respective printer . ❍ The print setting menu may differ slightly depending on the c[...]
-
Seite 122
122 ❍ When you have finished printing: 1. Disconnect the cable from the camcor der and printer . 2. T urn off the camcorder . Selecting the Number of Copies A maximum of 99 copies can be selected for one still image. 1. In the print setting menu, tur n the SET dial to select (COPIES) and press the SET dial. 2. T ur n the SET dial to select the nu[...]
-
Seite 123
123 Direct Printing E Print Setting Menu Paper Size hh Paper Type hi Borders hh Multiple print (8-UP) hi Print effect (Image Optimize) hi Date hi Icon that appears when connecting the printer Setting the Print Style q ( 123) Setting the Print Style w ( 125) h : Available × : Not available ❍ Border ed: The image area remains r elatively unchanged[...]
-
Seite 124
124 2. T ur n the SET dial to select the paper size and press the SET dial. 3. T ur n the SET dial to select the paper type and press the SET dial. 4. T ur n the SET dial to select a layout option and press the SET dial. Setting the Print Effect (Image Optimize) This function uses the camcorder's recording information to optimize the image dat[...]
-
Seite 125
125 Direct Printing E 1. In the print setting menu, tur n the SET dial to select [STYLE] and press the SET dial. 2. Make sure that (paper) is selected and press the SET dial. 3. T ur n the SET dial to select the paper size and press the SET dial. Pressing the MENU button brings you back to the print settings menu. 4. T ur n the SET dial to select ([...]
-
Seite 126
126 Printing with Print Order Settings Y ou can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOF compatible printers ( 120). A maximum of 200 still images can be selected. Selecting Still Images for Print[...]
-
Seite 127
127 Direct Printing E Erasing All Print Orders 1. Open the menu and select [CARD OPERA TIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear . 4. Close the menu. Printing 1. Connect the printer to the camcorder ( 120). 2. Open the menu and select [ PRINT]. • Th[...]
-
Seite 128
128 Screen Displays Hiding the Displays on the LCD Screen Y ou can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLA Y SETUP/ ]. Select [DISPLA YS], set it to [OFF <PLA YBK>] and close the menu. • W ar ning messages still appear , and the data code appears if turned on. • T ape opera[...]
-
Seite 129
129 Additional Information E PLA Y (VCR) Mode Screen Displays during Recor ding/Playback Time code T ape operation Remaining tape Remaining battery charge ( 27) Remote sensor mode ( 77) Condensation warning ( 136) Recording mode ( 59) Headphones ( 61) Wind screen ( 60) 16:9 mode ( 78) Photo recor ding ( 29) Audio mode ( 61) Recording r eminder ( 27[...]
-
Seite 130
130 CARD CAMERA Mode Still image quality ( 93) Movie size ( 94) Still image size ( 93) Remaining card capacity for still images ( 99) Stitch assist ( 104) Remaining card capacity for movies ( 102) Focusing frame ( 103) CARD PLA Y Mode Length of the movie Lap time Current image/ total images File number ( 95) Slide show ( 107) Data code ( 70) Protec[...]
-
Seite 131
131 Additional Information E List of Messages Message Explanation You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. Battery pack is exhausted. Replace or charge the battery pack. Cassette is protected. Replace the cassette or change the position of the pro[...]
-
Seite 132
132 Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred. The camcorder cannot record or play back the image. The error may be temporary. If the message d[...]
-
Seite 133
133 Additional Information E Direct Print Related Messages Message Explanation There is a problem with the paper. Wrong paper size is inserted, or the ink cannot be used with the selected paper. Paper is not correctly inserted or there is no paper. The paper jammed during printing. Paper size has been changed between print setting and start of prin[...]
-
Seite 134
134 Maintenance/Others Camcorder Handling Pr ecautions ❍ Do not carry the camcorder by the LCD panel or viewfinder . ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car , and high humidity . ❍ Do not use the camcorder in places subject to magnetic or electric fields such as near the TV transmitters o[...]
-
Seite 135
135 Additional Information E ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Viewfinder ❍ Move the viewfinder upward. Remove the protect cover and clean the glass with a cotton swab. Reattach the protect cover when finished. ❍ Be careful not to s[...]
-
Seite 136
136 Condensation Moving the camcorder rapidly between hot and cold temperature may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder . Condensation may form in the following cases: How to avoid condensation: ❍ Unload the cassette, plac[...]
-
Seite 137
137 Additional Information E Battery Pack Handling Precautions DANGER! T reat the battery pack with car e. • Keep it away from fire (or it might explode). • Do not expose the battery pack to temperature higher than 140 ºF (60 ºC). Do not leave it near a heater or inside a car in hot weather . • Do not try to disassemble or modify it. • Do[...]
-
Seite 138
138 Cassette Handling Precautions ❍ Rewind tapes after use. If the tape becomes slack and damaged, it may cause picture and sound distortion. ❍ Return cassettes in the case and store them upright. ❍ Do not leave the cassette in the camcorder after use. ❍ Do not use spliced tapes or nonstandard cassettes as they may damage the camcor der . ?[...]
-
Seite 139
139 Additional Information E ❍ Moving a memory card rapidly between hot and cold temperatur es may cause condensation to form on its external and inter nal surfaces. If condensation forms on the card, put it aside until the dr oplets have evaporated completely . ❍ Do not touch or expose the terminals to dust or dirt. ❍ Check the direction bef[...]
-
Seite 140
140 T roubleshooting If you have a problem with your camcorder , refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Recording/Playback Problem Cause Solution Battery pack is exhausted. Battery pack is not correctly attached. Battery pack is exhausted. Power save function has been activated. [...]
-
Seite 141
141 Additional Information E Recording Problem Cause Solution Camcorder is not set to CAMERA mode. Time zone, date and time are not set, or the backup battery is exhausted. Camcorder is turned off. Cassette is not loaded. Tape reached the end ( b END flashes on the screen). Cassette is protected ( v flashes on the screen). Camcorder is set to a mod[...]
-
Seite 142
142 Memory Card Operation Problem Cause Solution Memory card was not facing the correct direction. Memory card is full. Memory card is not formatted. Memory card is not inserted. File number reached maximum value. SD Memory Card is protected. Camcorder is not set to CARD PLAY mode. Memory card is not inserted. Image is protected. SD memory card is [...]
-
Seite 143
143 Additional Information E System Diagram (A vailability differs from ar ea to area) MultiMediaCard IFC-300PCU USB Cable Bubble Jet Direct compatib le printers/ PictBridge-compliant printers PC Card Adapter USB Reader/Writer BP-900 Series Battery Pack VL-10Li Battery Video Light WL-D82 Wireless Controller MiniD V Video Cassette SC-1000 Soft Carry[...]
-
Seite 144
144 Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. Y ou can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center . Use of genuine Canon accessories is recommended. This product is designed to perform optimally when used with genuine C[...]
-
Seite 145
145 Additional Information E TL-30.5/TL-H30.5 T ele-converter This T ele-converter lens increases the focal length of the camcorder lens by a factor of 1.9 (TL-30.5) or 1.7 (TL-H30.5). • The image stabilizer is not as effective when the T ele-converter is attached. • The minimum focusing distance with the TL-30.5 is 13.1 ft. (4 m); 1.6 in. (4 c[...]
-
Seite 146
146 SC-1000/SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. SC-A50 Soft Carrying Case This lightweight bag keeps the camcorder within easy reach without weighing you down or getting in the way . This mark identifies genuine Canon video accessories. When you use Canon video equipment, we[...]
-
Seite 147
147 Additional Information E Specifications ZR90/ZR85/ZR80 System 2 rotary heads, helical scanning DV system (consumer digital VCR SD system), digital component recording PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch) EIA standard (525 lines, 60 fields) NTSC color signal 1/6-inch CCD, approx. 680,000 pixels Effective pixels: tape app[...]
-
Seite 148
148 Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 32 – 104 ˚F (0 – 40 ˚C) 1.3 × 0.94 × 0.08 in. (32 × 24 × 2.1 mm) 0.07 oz. (2 g) Capacity Interface Operating temperature Dimensions Weight ø3.5 mm minijack Video: 1 Vp-p/75 ohms un[...]
-
Seite 149
149 Additional Information E Index 12bit audio . . . . . . . . . . . . . . . . . . 89 16:9 widescreen . . . . . . . . . . . . . . 78 6-second auto date . . . . . . . . . . . . 71 Abroad, using the camcorder . . . 139 Accessories. . . . . . . . . . . . . . . . 8, 144 AE shift . . . . . . . . . . . . . . . . . . . . . 51 Analog line-in . . . . . . . [...]
-
Seite 150
150 My Camera settings . . . . . . . . . . . 75 Night mode . . . . . . . . . . . . . . . . . . 49 Night+ mode . . . . . . . . . . . . . . . . . 49 Operating Mode . . . . . . . . . . . . . . . 5 Output channel . . . . . . . . . . . . . . . 38 Photo search . . . . . . . . . . . . . . . . . 74 Playback - Memory card . . . . . . . 106 Playback - T ape [...]
-
Seite 151
151 Additional Information E CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED W ARRANTY FOR THE UNITED ST A TES The warranty set forward below is given by Canon U.S.A., Inc. with respect to equipment pur chased in the United States. The limited warranty is only effective upon presentation of your Bill of Sale or other pr oof of purchase. Canon consu[...]
-
Seite 152
152 CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED W ARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment purchased in Canada. This limited warranty is only effective upon pr esentation of a bill of sale or other proof of purchase for this Canon digital video [...]
-
Seite 153
CANON INC. U.S.A. CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway , Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFFICE 210 War d Avenue, Suite 200, Honolulu, HI 96814 USA ● If you h[...]