Cisco Systems 3750-X Bedienungsanleitung

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Catal yst 3750-X and 3560-X S witc h Hardw are Installation Guide May 20 1 0 Text Part Number: OL -19593-01[...]

THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

iii Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 CONTENTS Preface vii Purpose vii Related Publication s vii Obtaining Documentation and Submitting a Serv ice Request viii CHAPTER 1 Product Overview 1-1 Switch Mode ls 1-1 Front Panel Description 1-3 10/100/1000 Ethernet Ports 1-3 PoE+ Ports 1-3 Network Modules 1-4 SFP an[...]

Contents iv Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Management Ports 1-20 Ethernet Management Port 1-20 USB Mini-Type B Port 1- 21 Management Options 1-21 Network Configurations 1-22 CHAPTER 2 Switch Installation 2-1 Preparing for Installation 2-1 Safety Warnings 2-1 Installation Guidelines 2-3 Tools and Equipment[...]

Contents v Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Connecting Devices to the Eth ernet Ports 2-27 10/100/1000 Ethernet Port Conn ections 2-28 PoE+ Port Connections 2-28 Where to Go Next 2-29 CHAPTER 3 Power Supply and Fan Module Installation 3-1 Power Supply Module Ove rview 3-1 Installation Guidelines 3-5 Installi[...]

Contents vi Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Finding the Switch Serial Number 4-6 Replacing a Failed Data Stack Member (Catalyst 3750 -X Switches) 4-6 APPENDIX A Technical Specif ications A-1 Switch Specifi cations A-1 Power Supp ly Module Speci fications A-2 Fan Module Specification s A-4 APPENDIX B Connec[...]

Contents vii Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 I NDEX[...]

Contents viii Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01[...]

vii Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Preface Purpose This guide desc ribes the hardw are features of th e Catalyst 3750-X and 3560-X switches. It describes the physical and performance characteristics of each sw itch, explains how to install a switch, and pro vides troubleshooting i nformation. This guide do[...]

viii Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Preface Information about Cisco SFP and SFP+ modules is av ailable from this Ci sco.com site: http://www .cisco.com/en/US/prod ucts/hw/module s/ps545 5/prod_installation_guides_l ist.html SFP compatibility matrix documents are a v ailable from this Cisco.com site: http:[...]

CH A P T E R 1-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 1 Product Overview The Catalyst 3750-X and 3560 -X series switches are Ethern et switches to which you can connect de vices such as Cisco IP Phones, Cisco W ire less Access Poin ts, workstati ons, and other n etwork devices such as servers, routers, and othe[...]

1-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Switch Models Catalyst 3750-X-48T - S IP Base image 3 48 10/100/1000 Et hernet ports, StackW ise Plus, StackPo wer , 1 network module 1 slot, 350-W po wer supply Catalyst 3750-X-24P-S IP Base image 3 24 10/100/1000 PoE+ 2 ports, StackW ise Plus[...]

1-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Front Panel Description The switch front panel includ es a USB T ype B console port, the 10/100/ 1000 Ethernet ports or th e 10/100/1000 PoE+ p orts, the network modu le, and the switch LEDs. Figure 1- 1 shows th e Catal[...]

1-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description • Config uration for StackPo wer PoE+. When the switch internal po wer supply module(s) cannot support the total load, StackPo wer configurat ions allow the switch to le verage po wer av ailable from other switches (on[...]

1-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description For informati on about the network modules, see the “Installing a Netw ork Module in the Switch” section on page 2-23 . F or cable specif ications, see Appendix B, “Connector and Cable Specif ications. ” SFP and [...]

1-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Ta b l e 1 -4 Cisco SF P Modules Supp ort ed for the 3750-X and 3560-X Switc hes Part Number Description GLC-GE-100FX= 100FX SFP on GE SFP port s for LAN switches 1 GLC-LH-SM= GE SFP , LC connector LX/LH transceiv er GLC[...]

1-7 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description l D WDM-SFP-4373= D WDM SFP 1543.73-nm SFP (100 GHz ITU grid) D WDM-SFP-4453= D WDM SFP 1544.53-nm SFP (100 GHz ITU grid) D WDM-SFP-4532= D WDM SFP 1545.32-nm SFP (100 GHz ITU grid) D WDM-SFP-4612= D WDM SFP 1546.12-nm S[...]

1-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description For information about SFP modules, see your SFP module documentation and the “Installing SFP and SFP+ Modules” se ction on page 2-25 . Fo r cable specifications, see Appe ndix B, “Connector and Cable Specif ication[...]

1-9 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description System LED For information on th e System LED colors during po wer -on self-test (POST), see the “Diagnosing Problems” secti on on page 4-1 . XP S LED Port LEDs and Modes Each Ethernet port and 10 -Gigabit Ethernet m[...]

1-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description When you press the Mode b utton on any switch in the Catalyst 37 50-X switch stack, all the stack switches change to show the same selected mode. For e xample, if you press the Mode b utton on the stack master to sho w [...]

1-11 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description USB Console LED The USB console LED shows whether there is an acti ve USB connection to the port. DUPLX (duplex) Of f Port is operating in half duple x. Green Port is operating in full duple x. MAST 1 (data stack master[...]

1-12 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description S-PWR LED (Catalyst 3750-X) Master LED (Catalyst 3750-X) Stack LED (Catalyst 3750-X) The stack LED sho ws the sequence of member switches in a stack. Up to nine switches can be members of a stack. The f irst nine port L[...]

1-13 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Figur e 1- 3 S t a c k L E D When you select the Stack LED mode, the represen tati ve Stack LEDs are green when the StackWise ports are up, and the representativ e Stac k LEDs are amber when the ports are down. PoE+ LED[...]

1-14 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Network Module LEDs Figur e 1 -4 Netw ork Module LE Ds (1 0-Gigabit Netw ork Mo dule Shown) USB Mini-Type B Port A USB 5-pin mini- T ype B connector on the front panel is a vailable for switch management ( Figure 1- 5 )[...]

1-15 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Description Rear Panel Description The switch rear panel has a ground connec tor , an RJ-45 console po rt, an RJ-45 10/100 mana gement port, a USB T ype A connector , two StackWise connectors (only Catalyst 3750-X swit ches), two fa[...]

1-16 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Desc ription RJ-45 Console Port LED USB Type A Interface The USB T ype A interface provides access to extern al USB FLASH devices (also kno wn as thumb driv es or USB keys). The interface supports Cisco USB flash driv es with capaci[...]

1-17 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Description • CAB-ST A CK -50CM-NH= (0.5-meter cable, nonhalogen) • CAB-ST A CK-1M-NH= (1-meter cable, nonhalogen) • CAB-ST A CK-3M-NH= (3-meter cable, nonhalogen) Power Supply Modules The 24- and 48-port swi tches are powered[...]

1-18 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Desc ription Note A 48-port switch with o ne 715-W power sup ply provides up to 8.7 W of PoE to all ports. The po wer supply modules ha ve two status LEDs. C3KX-PWR-350W AC= Spare Spare Primary or spare Primary or spare C3KX-PWR-440[...]

1-19 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Description For in formation about replacing a power sup ply module, wiring a DC p ower supply module, and module specifications, see Chap ter 3, “Po wer Supply and Fan Mo dule Installation, ” and Appendix A, “T echnical Speci[...]

1-20 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Desc ription The nine ports on th e XPS-2200 provide the power an d management signals to the Catalyst 3750-X and 3560-X switches. Ot her switch models do not su pport this management communication. The XPS-2200 communicates with ea[...]

1-21 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Management Options USB Mini-Type B Port The switch provid es a USB mini-T ype B console connection on the front pan el, and the RJ-45 console port on the swi tch rear panel. Cons ole output is al ways activ e on both connectors, but console in[...]

1-22 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Management Options • Cisco IOS CLI Y ou can configure and mon itor the switch and swit ch cluster members from the CLI. Y ou ca n access the CLI by connecting your managemen t station directly to the switch cons ole port or by us ing T elnet[...]

CH A P T E R 2-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 2 Switch Installation This chapter de scribes how to instal l and connect a Catalyst 3750-X or a 3560-X switch. It also includes planning and cabling con siderations for stacking sw itches (only Catalyst 3750-X switches). Read the topics and perform th e pro[...]

2-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Preparing for Installation War ni ng T o prevent the switch from overheating , do not operate it in an area that exceeds the maxim um recommended ambient temperature of 113•F (45•C). T o prevent airflow restriction, allow at least 3 inc[...]

2-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Preparing for Installation War ni n g Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 War ni n g For connections outside the build ing where the equipment is installed, the f[...]

2-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Planning a Switch Data Sta ck (Catalyst 3750-X Switches) • When connecting or disconnecting the power cord on a swit ch that is installed abo ve or belo w a 1100-W po wer supply-equipped switch, you might need t o remov e the module from [...]

2-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Data Stack Cabling Configurations Switch Data Stacking Guidelines For general concep ts and managem ent procedure s for switch stacks, se e the switch software confi guration guide on Ci sco.com. When addin g a Catalyst 3750-X swi tch to a C[...]

2-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Data Stack Cabling Co nfigurations Figur e 2-1 Data Stac king the Switches in a Rack or on a T able Using the 0.5-met er StackWise Cable The configuration e xamples in Figure 2-2 use a 3-mete r StackW ise cable a nd the supplied 0.5-meter S[...]

2-7 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Data Stack Cabling Configurations Figure 2-3 sho w s a recommended conf iguration when the switches are mounted si de-by-side. Use the 1-meter and the 3-meter StackW ise cables to conn ect the switches. This configur ation prov ides redundan[...]

2-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Planning a StackPower Sta ck (Catalyst 3750-X Switches) Figur e 2-7 Example of a P artitioned Data Stack with a Failov er Co ndition Power On Sequence for Switch Data Stacks Consider these guidelines befo re you po wer on the switches in a [...]

2-9 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation StackPower Cabling Configurations For general concept s and manageme nt procedures fo r switch power stacks, se e the switch software confi guration guide on Ci sco.com. Before connecting the switches in a powe r stack, keep in mind these gu[...]

2-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n StackPow er Cabling Configuration s Figur e 2-8 StackP ower Cable f o r Use Only with Catalyst 3750 -X Switc h es Figur e 2-9 XPS-2200 Cable for Use with XPS-2200 Ta b l e 2-1 StackP ow er Cables Part Number Cable T ype Length CAB-SPWR-30 [...]

2-11 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation StackPower Cabling Configurations Y ou can co nfigur e a ring po wer stack or use the XPS-220 0 to conf igure a star topology . Figure 2-10 sho ws a ring conf iguration using bo th of the supplied 0.3-met er StackPo wer cables and one 1.5-m[...]

2-12 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n StackPow er Cabling Configuration s Figur e 2-1 1 StackP ow er Star T opology Using the XPS-2200 Figure 2-12 shows a nine-switch data stack configured with three power stacks. A po wer stack can include a maximum of four switches. Y ou can[...]

2-13 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation StackPower Cabling Configurations Figur e 2-12 P ower Stacking Catalyst 3750-X Sw itches within a Switch D ata Stack Figure 2-13 and Figure 2-14 are e xamples of recommended con f igurations when the switches are mounted side-b y-side. Use [...]

2-14 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch StackPower Partitioning Examples Figure 2-15 and Figure 2-16 sho w StackPower stacks of Catalyst 3750-X swit ches with failo ver conditions. In Figure 2-15 , the StackPo w er cable 2 is faulty . Th erefore, this stack[...]

2-15 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing the Switch Installing the switch in ot her rack types requires an option al bracket kit not included with the switch. Figure 2-17 sho ws the standard 19-inch brackets and option al mounting bracke ts and part numbers. War ni n g [...]

2-16 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch Figur e 2-1 7 Rac k-Mou nting Brac k ets 1 19-inch bracket s, part number 700-29656-01 2 23-inch bracket s, part number 700-31900-01 3 23/24-inch brack ets, part number 700-31901 -01 4 ETSI brackets, part number 700 -[...]

2-17 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing the Switch Attaching the Rack -Mount Brackets T o install the switch in a rack, u se four Phillips flat -head screws to attach th e long side of the brackets to the switch for the front- o r rear-mountin g positions ( Figure 2-18[...]

2-18 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch Mounting the Switch in a Rack After the brackets are attached to the switch, use the supp li ed Phillip s machine screws to attach the brackets to the rack ( Figure 2-1 9 ). Use the black Phil lips machine scre w to a[...]

2-19 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing the Switch Figur e 2-19 Mounting the S witch in a Rack 1 Phillips machine scre w , black 5 Mid-mounting position 2 Cable guide 6 Rear-moun ting position 3 Front-mounting po sition 7 Four -point mounting position 4 Number-1 2 or n[...]

2-20 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch When you complete the switch installatio n, see the “ After Installing the Sw itch” section on page 2-21 for more information abo ut switch configu ration. Table- or Shelf-Mounting T o install the switch on a tabl[...]

2-21 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Connecting to the St ackWise Ports (Catalyst 3750-X Switches) After Installing the Switch After the switch is installed, you might need to: • Config ure the switch by runni ng Express Setup to enter the init ial switch conf iguration. For[...]

2-22 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Connecting to the Stac kPower Ports (Catalyst 3750-X Switches) Caution Removing and in stalling the StackW ise cable can shorten its useful life. Do not remov e and insert the cable more often than i s absolutely necessary . When you need [...]

2-23 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Connecting the StackPower Ports to the XPS-2200 Connecting the StackPower Ports to the XPS-2200 Before connecting the Stac kPower cables, re view the “Planning a StackPower Stack (Catalyst 3750-X Switches)” section on page 2-8 . Always [...]

2-24 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing a Network Module in the Switch Use only Cisco network modules and SFP or SF P+ modules with the switch. For informati on about supported SFP modules, see the “SFP and SFP+ Modules” section on page 1-5 . For more informati on[...]

2-25 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing SFP and SFP+ M odules Figur e 2-25 Installing the Networ k Module in the Switc h Caution Do not install the con verter module with connected SFP modules or ca bles. Al ways remov e any cabl es and modules before installing th e c[...]

2-26 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing SFP and SFP+ Modules Installing an SFP Module Observe these general p recautions: War ni ng Class 1 laser product. Statement 1008 • Do not remov e the dust plugs from the SFP modu les or the rubber caps fro m the f iber-optic [...]

2-27 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports Figur e 2-27 Networ k Module with SFP Modules Installed Removing an SFP Module Step 1 Attach an ESD-pre ventiv e wrist strap to your wrist and to a bare metal surf ace. Step 2 Disconnect the cable f[...]

2-28 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Connecting Devices to the Eth ernet Ports 10/100/1000 Ethernet Port Connections The 10/100/1000 Ether net ports use RJ-45 connectors with Ethernet pi nouts. The maximum cable length is 328 feet (100 meters). The 100B ASE-TX and 1000B ASE-T[...]

2-29 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Where to Go Next Y ou can use this application to calculate the power su pply requirements for a specific PoE conf iguration. Enter the number and types of po wered dev ices that y ou plan to attach to the switch, and the calculator sho ws [...]

2-30 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Where to Go Ne xt • Use the CLI to configure the switch as a member of a cluster or as an i ndivi dual switch from the console. See the switch command reference on Cisco. com for information o n using the CLI with the switch. • Start a[...]

CH A P T E R 3-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 3 Power Supply and Fan Module Installation • Po wer Supply Module Overvi ew , page 3-1 • Installation Guidelines, p age 3-5 • Installing an A C Po wer Supply , page 3-6 • Installing a DC Po wer Supply , page 3-7 • Finding the Po wer Supply Module S[...]

3-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Power Supply Module Overview Note A 48-port switch with o ne 715-W power sup ply provides up to 7.7 W of PoE to all ports. The 350-W and 715-W A C power sup ply modules are autoranging units that su pport input v o lta[...]

3-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Power Supply Modu le Overview Each A C power su pply module has a po wer cord for connection to an A C po wer outlet. The 1100-W and 715-W modules use a 16-A WG cord (only Nort h America). All other modules use an 18-A W[...]

3-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Power Supply Module Overview Figur e 3-3 350-W AC P ow er Supply Module Figur e 3-4 440-W DC P ower Supply Module If no po wer supply is installed in a po wer supply slot, install a po wer supply slot cov er ( Figure 3[...]

3-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installation Guidelines Figur e 3-5 P ower Supply Slot Cov er The po wer supply modules ha ve two status LEDs. Installation Guidelines Ta b l e 1-16 lists the switches and the comp atible power - supply mod ules. Observe[...]

3-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Installing an AC Power Supply • Y ou can remove and replace the po wer supply when the switch is connected to an XPS-2200 witho ut interrupting normal switch operation. After a delay of about 3 seco nds, the switch p[...]

3-7 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a DC Power Supply Caution Do not lea ve the po wer-supply slot op en for mo re than 90 seconds whi le the switch is operating. Step 5 Insert the ne w power suppl y into the po wer-supply slot, and gently push [...]

3-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Installing a DC Power Supply War ni ng An exposed wire lead from a DC-input power source can condu ct harmful levels of electricity . Be sure that no exposed po rtion of the DC-input powe r source wire extends from the[...]

3-9 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a DC Power Supply Grounding the Switch Follo w the grounding procedures at yo ur site and observ e these warnings: War ni n g This equipment must be grounde d. Never defeat the ground conductor or operate the [...]

3-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Installing a DC Power Supply Step 5 Use the ground scre w to attach the single-ground lug to the switch rear pan el. Use two ground scre ws to attach the dual-hole lug to the switch rear panel ( Figure 3-10 ). Step 6 [...]

3-11 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a DC Power Supply Figur e 3-1 1 Inserting the DC P ow er Supply in the Switch Step 6 Connect the input po wer as described in the “W iring the DC Input Po wer Source” section. Wiring the DC Input Power So[...]

3-12 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Finding the Power Su pply Module Serial Number Figur e 3-13 DC Source A and Source B Connections with Common Ground Step 4 T orque all terminal block scre ws to 11 lbf-in. Step 5 Replace the terminal block safety cove[...]

3-13 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Finding the Power Supply Modu le Serial Number Figur e 3-15 715-W and 350-W AC P ow er Su pply Module Ser ial Number 277561, 781-00668-01 SN: XXXNNNNXXXX C3KX- PWR-7 1 5WA C[...]

3-14 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Fan Module Overview Figur e 3-16 440-W DC P ower Supply Module Ser ial Number Fan Module Overview The switch has two f an modules. Each fan module contains two f ans. Fan modules are hot-sw appable. Figur e 3-1 7 F an[...]

3-15 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a Fan Module Installin g a Fan Module Note There must be a fan module in bot h fan module sl ots. Step 1 Pinch the fa n release handle, and slide the f an out. Caution Y ou shou ld replace a failed f an modul[...]

3-16 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Finding the Fan Module Serial Number Figur e 3-19 F a n Module Serial Number 277564, 781-00666-01 SN: XXXNNNNXXXX[...]

CH A P T E R 4-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 4 Troubleshooting • Diagnosing Problems, page 4- 1 • Resetting the Switch to the F actory Default Settings, page 4-5 • Finding the Switch Serial Number , page 4-6 • Replacing a F ailed Data Stack Member (Catalyst 3750-X Switches), p age 4-6 Diagnosin[...]

4-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 4 Tro ubleshooting Diagnosing Prob lems Switch Connections Bad or Damaged Cable Always e xamine the cable for marginal damage or fa ilure. A cable might be just good enough to connect at the physical layer , but it could co rrupt packets as a r esult of subtle da[...]

4-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 4 Troubleshooting Diagnosing Problems 10/100/1000 Port Connections A port appears to malfun ction: • V e rify the status of all ports. See Ta b l e 1-8 on page 1-10 for descriptions of the LEDs and their meanings. • Use the show interfaces pri vileged EXEC co[...]

4-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 4 Tro ubleshooting Diagnosing Prob lems Note When ordering or using CX1 cables, ensure that t he version identif ier is 2 or higher . • For long w av e SFP+ modules, a mode conditioning patch might impro ve performance ov er maximum link distan ces with MMF con[...]

4-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 4 Troubleshooting Resetting the Switch to th e Factory Default Settings Autonegotiation and Ne twork Interface Cards Problems sometimes occur between the switch and thi rd-party network in terface cards (NICs). By default, th e switch ports and interf aces autone[...]

4-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 4 Tro ubleshooting Finding the Swit ch Serial Number Finding the Switch Serial Number If you contact Cisco T echnical Assistance, yo u need to know the sw itch serial number . Figure 4-1 shows the serial number location. Y ou can also use the show vers ion pri vi[...]

A-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 APPENDIX A Technical Specificatio ns • Switch Specifications, page A-1 • Po wer Supply Module Specif ications, page A-2 • Fan Module Spec ifications, page A-4 Switch Specifications Ta b l e A -1 Envir onment al and Ph ysical Specifications Environmental Ranges Opera[...]

A-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix A Technical Specific ations Power Supply Module Specifications Power Supply Module Specifications W eight Catalyst 3750-X-24T Catalyst 3750-X-24P Catalyst 3750-X-48T Catalyst 3750-X-48P Catalyst 3750-X-48PF Catalyst 3560-X-24T Catalyst 3560-X-24P Catalyst 3560-X[...]

A-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix A Technical Specifications Power Supply Modu le Specifications W eight C3KX-PWR-1100W AC C3KX-PWR-715W AC C3KX-PWR-350W AC C3KX-PWR-440WDC 3 lb (1.4 kg) 2.8 lb (1.3 kg) 2.7 lb (1.2 kg) 3.5 lb (1.6 kg) Dimensions (H x D x W) C3KX-PWR-1100W AC C3KX-PWR-715W AC C3KX[...]

A-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix A Technical Specific ations Fan Module Specifications Fan Module Specifications Ta b l e A -4 Po wer Specifications f or DC-P ower 24- and 48-P ort S witches Power Specifications Maximum output po wer C3KX-PWR-440WDC: 44 0 W Input current C3KX-PWR-440WDC: 16 –[...]

A-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix A Technical Specifications Fan Modul e Sp ecifications Ta b l e A -6 Standards and Cer tifications Description Specification Electromagnetic compatibi lity certif ications FCC Part 15 Class A EN55022 Class A (CI SPR22) EN55024 (CISPR24) CE VCCI Class A AS/NZS CIS[...]

A-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix A Technical Specific ations Fan Module Specifications[...]

B-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 APPENDIX B Connector and Cab le Specifications • “Connector Specifications” section on page B-1 l • “Cable and Adapter Specifications” section on page B-5 Connector Specifications • 10/100/1000 Ports, p age B-1 • 10 Gigabit Ethernet CX1 ( SFP+ Copper) C on[...]

B-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Connector Specifications 10 Gigabit Ethernet CX1 (SFP+ Copper) Connectors The 10-Gigabit Ethernet electrical modul es use CX1 copper connectors similar to the one sho wn in Figure B-2 . Note When ordering or using CX1 cable[...]

B-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Connector Specifications Figur e B-4 Simplex LC Cabl e Connect or Figur e B-5 Coppe r SFP Module RJ -45 Connector Figur e B-6 SFP Module P atch Cable (Catalyst 3560-X Switc hes) 10/100 Ethernet Management Port The 10/100 Ether[...]

B-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Connector Specifications Figur e B-7 1 0/ 1 0 0 P ort Pinouts Console Port The switch has t wo console ports: a US B 5-pin mini-T ype B port on t he front panel (see Figure B-8 ) and an RJ-45 console port on the rear panel.[...]

B-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Cable and Adapter Specification s The RJ-45 console port uses an 8-pin RJ-45 connecto r (See Ta b l e B-2 and Ta b l e B-3 .) The supplied RJ-45-to-DB-9 adapter cable i s used to connect the co nsole port of the switch to a co[...]

B-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications 1000B ASE-T (GLC-T) Standard 4 twisted-pair Categor y 5 cable — — — 328 feet (100 m) 1000B ASE-LX/LH (GLC-LH-SM) 1310 MMF 3 SMF 62.5/125 50/125 50/125 G.652 2 500 400 500 — 1,804 fe[...]

B-7 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Cable and Adapter Specification s Four Twisted-Pair Cable Pinouts Figur e B-1 0 Four T wiste d-P a ir Straight-Thr ough Cable Schematic Figur e B-1 1 Four T wiste d-P a ir Crosso ver Cable Schematic Two Twisted-Pair Cable Pino[...]

B-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications Figur e B-13 T w o T wisted-P air Crossov er Cable Schematic Identifying a Crossover Cable T o identify a crosso ver cable, hold the cable ends side-b y-side, with the tab at the back. The [...]

B-9 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Cable and Adapter Specification s Ta b l e B-3 lists the pinouts fo r the console port, RJ-45-to-DB-2 5 female DTE adapter , and the console device. Note Th e RJ-45-to-DB-2 5 female DTE adapter i s n ot su pp lie d w it h the [...]

B-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications[...]

C-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This appendix pro vides a CLI-bas ed setup procedure for a Catalyst 3750-X and 3 560-X standalone switch or a switch stack. T o set up th e switch by using Express Setup, see the Cisco 3750-X and 3560-X Sw[...]

C-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Accessing the CLI Note If you ha ve stack ed Catalyst 3750- X switches, connect to the 10/100 Ethernet managemen t port or console port of one of the stack sw itches. Y ou can perform the initial configu[...]

C-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Accessing the CLI Figur e C-1 Connecting the USB Console Cable to the Catalyst 3750-X or 3560-X Sw itch Step 2 Connect a US B cable to t he PC US B port . Connect the othe r end of the cable to the switch[...]

C-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Accessing the CLI Installing the Cisco Microsoft Windows XP USB Driver Step 1 Obtain the f ile Cisco_usbconsole_dri ver .zip from the Cisco.com web site and unzip it. Note Y ou can download the driver f [...]

C-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Accessing the CLI Note If a User Account Control warnin g appears, click Allow - I trust this pr ogr am to proceed. Step 5 The InstallShield W iza rd Comp leted windo w appears. Click Finish . Step 6 Conn[...]

C-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information Uninstalling the Cisco Microsoft Windows Vista and Windows 7 USB Driver Note Disconnect the switch console termin al before uninstalling the driv er . Step[...]

C-7 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Entering the Initial Configuration Information Would you like to enter the initial configuration dialog? [yes/no]: yes At any point you may enter a question mark '?' for help. Use ctrl-c to abor[...]

C-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information If you enter N , the switch appears as a candidate switch in the Network Assistant GUI. Y ou can configure the switch as a command switch later through the[...]

IN-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 INDEX Numerics 10/100/1000 p orts cable lengths 1-3, 2-28 connecting to 2-28 described 1-3 pinouts B-1 recommended cables 2-28 10/100 Ethern et management port 1-20 10-Gigabit Ethernet modul e slots connecting devices 2-24 19- and 24-inch racks 2-18 A AC power power-supp[...]

Index IN-2 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 crossover cable See cables D DC power power-supply modul e described 1-17 specifications A-4 DC power warn ing 3-8 device ma nager described 1-21 to configure switch 2-29 diagnosing problems 4-1 dimensions A-3 duplex default setting 2-28 LED 1-10 troubleshooting 4-[...]

Index IN-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 J jewelry removal warnin g 2-2 L LEDs color meanings 1-9 duplex 1-10 front panel 1-8 to 1-14 interpreting 1-9 master 1-12 PoE+ 1-10 port 1-9 to 1-12 port mode 1-9 to 1-11 POST results 4-1 speed 1-10 stack 1-12 StackPower 1-12 STATUS 1-10 system 1-9 troubleshooting [...]

Index IN-4 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 PoE+ (continued) troubleshooting 4-3 port and interface trou bleshooting 4-4 port LEDs 1-9 to 1-12 port modes changing 1-8 LEDs 1-9 to 1-10 See also mode button ports 10/100/1000 connecting to 2-28 described 1-3 pinouts B-1 recommended cables 2-28 POST LEDs 4-1 run[...]

Index IN-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 SunNet Manager 1-22 switch models 1-1 system LED 1-9 T table-moun ting 2-20 technical specifications A-1 telco rac ks 2-18 Telnet, and a ccessing the CLI 1-22 temperat ure, operat ing A-1 transceiver troub leshooting 4-3 troubleshooting bad or dam aged cable 4-2 co[...]

Index IN-6 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01[...]