Cisco Systems 4500 Bedienungsanleitung

Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Catal yst 4 5 0 0 Se r i e s Sw i t c he s Installation Guide December 20 05 Customer Order Number: DO C-7814409= Text Part Number: 78 -14409-08[...]

THE SPECIFICA TIONS AND IN FORMA TION REGARDING THE PRODUCTS IN THIS M ANUAL ARE SUBJECT TO CHANGE WITHOUT NO TICE. ALL ST A TEMENTS, INFORMA TION, AND RECOMMEND A TION S IN THIS MANU AL ARE BELIEVED TO BE ACCURA TE BUT ARE PRESENTED WITHOUT W ARRANTY OF ANY KIN D, EXPRESS OR IMPLIED . USERS MUST T AKE FULL RESPONSIBILITY FOR THEIR APPLICA TION OF [...]

Catalyst 4500 Series Swi tches Instal lation Guide Copyright © 2002 – 2005 Ci sco Systems, I nc. All rights res erved. CCVP , the Cisco logo, and W elcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the W ay W e W ork, Live, Play , and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, Catalys[...]

[...]

5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 CONTENTS Preface 9 Audience 9 Organization 9 Related Documentation 10 Conventi ons 11 Obtaining Documentation and Submitting a Serv ice Request 17 CHAPTER 1 Product Overview 1 Switch Feature s 1 Catalyst 4503 Switch Features 2 Catalyst 4506 Switch Features 6 Catalyst 4507R Switch Featu[...]

Contents 6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Power Supply LEDs 37 Power Supply Fan 38 Load-Sharin g Feature 38 Environmental Monitoring Feature 38 1400 W DC Triple-input Power Supply Op erational Modes 39 System Architecture 43 Power Flow 43 Power over Ethernet 44 Management Flow 48 Switching Traffic Flow 49 CHAPTER 2 Pr[...]

7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Contents Connecting Syst em Ground and Power 24 CHAPTER 4 Removing and Repl acing FRUs 1 Removing and Replacing the Power Su pply 2 Required Tools 5 Removing an AC-Input Power Supply 5 Installing an AC-Input Power Supply 8 Removing a DC-Input Power Supply 11 Required Tools 11 Removal P[...]

Contents 8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Troubleshooting Switchin g Modules 10 Troubleshooting Switchin g Modules Using Cisco IOS 12 Troubleshooting Supervisor Engines 13 Troubleshooting Superviso r Engines Using Cisco IOS 14 Contacting the Cisco Technical Assistance Ce nter 16 Serial Numbers 17 APPENDIX A Specificat[...]

9 Cataly st 4500 Series Sw itches Installation Guide 78-14409-08 Preface This preface describes the audi ence, organi zation, and conventions o f the Catalyst 4500 Series Switches Installation Guide and provides information on how to obtain related document ation and technical assis tance. Audience Only trained and qualified service pe rsonnel (as [...]

Preface Related Do cumentation 10 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Related Documentation Refer to the following documents for addit ional Catalyst 4500 series information: • For info rmation about indi vidual switching modules and supervisor s refer to the Catalyst 4500 Series Module Instal lation Guide at: http://www[...]

11 Cataly st 4500 Series Sw itches Installation Guide 78-14409-08 Preface Conventions • The command reference appropriate to your sof tware ver sion. Command references are at: http://www .cisco.com/en/US/products/ hw/switches/ps4324/ prod_command _referen ce_list.html • The system message guide appropriate to your software version. System mess[...]

Preface Conventions 12 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Notes use the followi ng conventions: Note Means reader take note . Notes contain helpful suggestions or references to material not co vered i n the publication. Cautions use the following conventions: Caution Means re a d e r b e c a re f u l . In this situation, [...]

13 Cataly st 4500 Series Sw itches Installation Guide 78-14409-08 Preface Conventions W arnings use the following con ventions: War ni ng IMPORT ANT SAFETY INSTRUCTIONS This warning symbol m eans danger . Y ou are in a situation that could cause bodily injury . Before you work on any equipment, be aware o f the hazards involved with electrical c ir[...]

Preface Conventions 14 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Attention IMPORT ANTES INFORMA TIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une situation pouvant entraîner des blessu res ou des dom mages corporels. Avant de travailler sur un équipement, soyez conscient des da[...]

15 Cataly st 4500 Series Sw itches Installation Guide 78-14409-08 Preface Conventions Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynn er å arbeide med noe av utstyret, må du være oppmerksom på faren e forbundet med ele ktriske kretser , og kjenn[...]

Preface Conventions 16 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Va r n i n g ! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signale rar fara. Du befinner dig i en situation som kan leda till personsk ada. Innan du utför arbete p å någon utrustning måste du vara medveten om farorna med elkretsar och känna til l vanlig[...]

17 Cataly st 4500 Series Sw itches Installation Guide 78-14409-08 Preface Obtaining Documentation and Submitting a Service Request Obtaining Documentation and Submitting a Service Request For informatio n on obtaining documentation, submit ting a service request, and gathering additio nal information, see the monthly What’ s New i n Cisco Pr oduc[...]

Preface Obtaining Documentation and Subm itting a Service Request 18 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08[...]

CH A P T E R 1-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 1 Product Overview This chapter pro vides an overvi ew of the features and components of the Catalyst 4500 series switches. The Catalyst 4500 series switches are the Catalyst 4503 switch, the Catalyst 4506 switch, the Catalyst 4507R sw itch, and the Catalyst 4510R switch[...]

Chapter 1 Product Overview Switch Features 1-2 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Catalyst 4503 Switch Features The Catalyst 4503 switch (see Figure 1-1 ) is a three-slot switch de signed for high-performance, high -density wiring closet app lications. Figur e 1 -1 Catalyst 4503 Switch (F ront V iew) The Catalyst 4503 swi[...]

1-3 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Slot 1 is reserv ed for the supervisor eng ine only , which pro vides switching, local and remote management, and swit ch-status monitoring. Slo ts 2 and 3 are a vailable for switching modul es. Ta b l e 1-1 describes the features o f the C[...]

Chapter 1 Product Overview Switch Features 1-4 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Switching modul e support • 24-port 10/100B ASE-TX Fast Ether net switching module (WS-X4124-R J45) • 24-port 100B ASE-FX Fast Ethernet swi tching module (WS-X4124-FX-MT) • 48-port 100B ASE-FX Fast Ethernet swi tching module (WS-X4148-[...]

1-5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Switching module support (continued) • 2-port Gigabit Ethernet switch ing module (WS-X4302-GB) • 6-port 1000B ASE-X Gigabit Ethernet switchi ng module (WS-X4306-GB) • 6-port Gigabit Ethernet switch ing module (WS-X4506-GB-T) • 12-po[...]

Chapter 1 Product Overview Switch Features 1-6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Catalyst 4506 Switch Features The Catalyst 4506 switch (see Figure 1-2 ) is a six-slot switch designed for high-performance, high -density wiring closet app lications. Figur e 1 -2 Catalyst 4506 Switch (F ront V iew) The Catalyst 4506 switch[...]

1-7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures SFP modules for Gigabit Ethernet connecti ons, or X2 modul es for 10-Gigabit Ethernet connection s. Refer to the instal lation note for your superv isor engine for more details on these modules. Slot 1 is reserv ed for the supervisor eng in[...]

Chapter 1 Product Overview Switch Features 1-8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Supervisor engine support • Supports the Supervisor Engine II, II+, II+10GE, III, IV , V , 6-E • Holds the ASIC -based forwar ding engine (data p ath) and the management processor and so ftware (control path) • Features interface monit[...]

1-9 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Switching module support (continued) • 32-port 10/100-Mbp s Fast Ethernet plus 2- port Gigabit Ethern et switching module (WS-X423 2-GB-RJ) • 32-port 10/100-Mbp s Fast Ethernet plus 2- port 1000B ASE-X Layer 3 Gigabit Ethernet rout ing [...]

Chapter 1 Product Overview Switch Features 1-10 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Catalyst 4507R Switch Features The Catalyst 4507R switch (see Figure 1-3 ) is a se ven-slot switch designed for high-performance, high -density wiring closet app lications. Figur e 1 -3 Catalyst 4507R Switc h (Front V iew) The Catalyst 4507[...]

1-11 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Series Supervisor Engines and Swit ching Modules I nstallation Note . Some supervisor engines use SFP modules for Gigabit Ethernet connections, or X2 modules for 10-Gi gabit Ethernet connecti on s. Refer to the installation note for your s[...]

Chapter 1 Product Overview Switch Features 1-12 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Supervisor engine support • Supports the Supervisor Engi ne II+ , II+10GE, III, IV , V , V -10GE, 6-E Note The blank li ne card (C4K-SLOT -CV R-E) must be installed when either of the foll owing two situat ions occur: If your Catalyst 450[...]

1-13 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Switching module support • 32-port 10/10 0-Mbps Fast Ethern et plus 2-port Gig abit Ethernet switching module (WS-X4232- GB-RJ) • 32-port 10/10 0-Mbps Fast Ethernet plus 2-port 1000B ASE-X Layer 3 Gigabit Ethern et routing module (WS-X[...]

Chapter 1 Product Overview Switch Features 1-14 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Switching module support (continued) • 24-port IEEE 802.3af-compliant PoE 10/100B ASE-TX switching module (WS-X4224-RJ45V) • 48-port IEEE 802.3af compliant Po E 10/100B ASE-TX RJ-45 switching module (WS-X4248- RJ45V) • 48 port IEEE 80[...]

1-15 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Catalyst 4510R Switch Features The Catalyst 4510R switch (see Figure 1-4 ) is a ten-slot switch designed for high-performance, high -density wiring closet app lications. Figur e 1 -4 Catal yst 451 0R S witch (F ro nt Vie w) The Catalyst 45[...]

Chapter 1 Product Overview Switch Features 1-16 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Installati on Guide or the Catalyst 4500 Series Supervisor Engines and Switching Modules Installation Note . Some supervi sor engines use SFP modules for Gigabit Ethernet connections, or X2 modu les for 10 Gigabit Et hernet connections. Ref[...]

1-17 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Supervisor engine support • Supports the Supervisor Engi ne V , V -10GE, 6-E Note The blank li ne card (C4K-SLOT -CV R-E) must be installed when either of the foll owing two situat ions occur: If your Catalyst 4507R or Cataly st 4510R sw[...]

Chapter 1 Product Overview Switch Features 1-18 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Switching module support • 24-port 10/10 0B ASE-TX Fast Ethernet switching module (WS-X4124-RJ45) • 24-port 100B ASE-FX Fast Et hernet switching module (WS-X412 4-FX-MT) • 48-port 100B ASE-FX Fast Et hernet switching module (WS-X414 8[...]

1-19 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Switch Feat ures Switching module support (continued) • 32-port 10/10 0-Mbps Fast Ethernet plus 2-port 1000B ASE-X Layer 3 Gigabit Ethern et routing module (WS-X4232-L3) • 32-port 10/10 0-Mbps Fast Ethernet switching module with mod ular uplink support[...]

Chapter 1 Product Overview Supervisor Engines 1-20 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Supervisor Engines The follo wing supervisor eng ines are av ailable fo r the Ca talyst 4500 seri es switches: • Supervisor Engine II (WS-X40 13) ( Figure 1-5 ) • Supervisor Engine II-Plu s (WS-X4013+) ( Figure 1-6 ) • Supervisor E[...]

1-21 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Supervisor Engines RMON The fi rst four groups (Ethernet stati stics, Alarms, Event s, and History) are on a per -port basis without an optional RMON p rocessing module SP AN 2 Supported, which allo ws you to redi rect traf fic from any port or VLAN to a S[...]

Chapter 1 Product Overview Supervisor Engines 1-22 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 The Supervisor Engine IV and Su pervisor Engine V support the Catalyst 4 500 Series NetFlo w Services Card (WS-F4531). The Supervi sor Engine V -10GE supports NetFlo w services without a NetFlo w Services Card. T o install the supervisor[...]

1-23 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Supervisor Engines Figur e 1 -6 Supervisor En gine II-Plus (WS-X40 13+) Figur e 1 -7 Catalyst 4500 Ser ies Supervisor Engine II-Plu s TS (WS-X40 13+TS) 78479 STATUS LED RESET button Gigabit uplink ports Switch load indicators CONSOLE port (RJ-45) Managemen[...]

Chapter 1 Product Overview Supervisor Engines 1-24 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 1- 8 Superv isor Engine II-Pl us 1 0GE (WS-X40 13+1 0GE) Figur e 1 -9 Supervisor En gine III (WS-X40 14) 120474 STATUS LED RESET button 10 GE uplink ports Gigabit SFP ports Switch load indicators CONSOLE port Ethernet management [...]

1-25 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Supervisor Engines Figur e 1 -1 0 Supervisor Engi ne IV (WS-X4515) Figur e 1 -1 1 Supervisor Engine V (WS-X4516) U P L IN K 1U P LIN K 2 AC T IV E L IN E A C TIV E LIN E A C TIV E RESET UTILIZATION S T A T U S W S -X4 515 S U P ER VISO R E N G IN E IV 1% 1[...]

Chapter 1 Product Overview Supervisor Engines 1-26 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 1 -12 Supervisor Engine V -1 0GE (WS-X451 6-1 0GE) For informatio n about the connectors, LEDs, and switches locat ed on the front panel of the supervisor engine, see these sections : • LEDs, page 1-27 • Gigabit Ethernet Up l[...]

1-27 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Supervisor Engines LEDs Ta b l e 1-6 describes the superviso r engine LEDs. Gigabit Ethernet Uplink Ports The Gigabit Ethern et uplink ports ope rate in full-duplex mode only . GB ICs hav e SC connectors to interface with multim ode fiber (MMF) and single-[...]

Chapter 1 Product Overview Supervisor Engines 1-28 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 When two Supervisor Engine Vs are pres ent in a C atalyst 4507R and Catalyst 4510R, all four uplin ks are activ e on bot h Primary (activ e) and Secondary (standby) su pervisor engines by def ault, or two uplinks will be acti ve in a non[...]

1-29 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Supervisor Engines Ethernet Management Port The Ethernet m anagement port c an be used (in ROMMON mode only) to rec ov er a switch software i mage that has been corrupted or destro yed due to a network catastrophe. When using Cisco IOS Release 12 .2(50)SG [...]

Chapter 1 Product Overview Fan Assembly 1-30 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 For more informati on, refer to Using the Compact Flash on the Cat alyst 4000 F amily Supervisor Engine III and IV at the follo wing URL: http://www .cisco.com/en/US/docs/switches/l an/catalyst4500/hardw are/conf igur ation/notes/OL_2 788.html[...]

1-31 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Fan Assembly Figur e 1- 1 3 C a t a l y s t 4503 Airflow Figur e 1- 1 4 C a t a l y s t 4506 Airflow 1 1 3 1 13 1 1 3 1 1 3 77981 4 5 0 6 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RE S ET UTILIZA TIO N S T A T U S 4503 W S -X[...]

Chapter 1 Product Overview Fan Assembly 1-32 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 1- 1 5 C a t a l y s t 4507R Airflow 68111 Fan assembly WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 4 2 4 1 4 0 3 9 3 8 3 7 3 6 3 5 3 4 3[...]

1-33 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Fan Assembly Figur e 1- 1 6 C a t a l y s t 451 0R Airflow 94942 WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 4 2 4 1 4 0 3 9 3 8 3 7 3 6 3 5 3 4 3 3 4 6 4 5 4[...]

Chapter 1 Product Overview Power Supplies 1-34 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Power Supplies Note For detailed speci fications on all Catalyst 4500 series po wer supplies, refer to the “Catalyst 4500 Series Po wer Supplies” section on page A-9 . A Catalyst 4500 series switch can use a 1000 W , 1300 W , 1400 W , 28[...]

1-35 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Power Supplies Figur e 1 -18 420 0 W Dual Input AC P ower Supply Note The 4200 W A C power supply shou ld not be used in mixed-v oltage confi gurations. All the inputs in a chassis must be the same v oltage (110 or 220 V). Figur e 1 -19 1400 W DC-Input P o[...]

Chapter 1 Product Overview Power Supplies 1-36 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 1 -20 140 0 W DC T r iple-Input P ow er Supply Note The 1400 W DC triple-input power supply is no t compatible with other po wer supplies use d on these product s, and can only be used with sim ilar supplies. In redundant mode, the t[...]

1-37 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Power Supplies When power i s removed from one po wer s upply on a Cata lyst 4500 series switch that has two po w er supplies, the redundant po wer feature causes the second power supply to prod uce full power . T o replace a power supply , see the “Remo[...]

Chapter 1 Product Overview Power Supplies 1-38 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Power Supply Fan Each po wer supply has a bu ilt-in fan. Air en ters the front of the po wer supply (po wer-in put end) and ex its through th e back. An air dam keeps the airflow separate from the rest of the chassis, whic h is cooled by the[...]

1-39 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Power Supplies For a 1400 W DC power sup ply , the main po wer switch has an input range of –40.5 to –7 2 V DC, while th e –48 V PoE operates ov er a range of –40.5 to –56 V DC. The PoE either fails to start or s huts do wn if exposed to gr eater[...]

Chapter 1 Product Overview Power Supplies 1-40 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 The maximum total i nput current is 42.5A and t he maximum ambient temperature is 55 C. T o determine total maximum input p ower to a sup ply , add up the acti ve indi vidual module input power ratin gs. Ta b l e 1-9 pro vides output informa[...]

1-41 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview Power Supplies Ta b l e 1 - 1 1 Minimum Load T able PSU1 PSU2 Input 1 Input 2 Input 3 Input 1 Input 2 Input 3 12V Minimum Load 3.3V Minimum Load Single Operation Mode 1 ON OFF OFF ––– 1.33A 0.6A Mode 2 OFF ON OFF ––– 1.33A 0.6A OFF OFF ON –?[...]

Chapter 1 Product Overview Power Supplies 1-42 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Dual Redundant Operation Mode 1 ON OFF OFF ON OFF OFF 2.66A 1.2A Mode 2 OFF ON OFF OFF ON OFF 2.66A 1.2A OFF OFF ON OFF OFF ON 2.66A 1.2A Mode 3 ON ON OFF ON ON OFF 5.32A 1.2A ON OFF ON ON OFF ON 5.32A 1.2A Mode 4 OFF ON ON OFF ON ON 5.32A 1[...]

1-43 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview System Architecture System Architecture This section describes the interaction be tween the v arious system components of Catalyst 4500 series switches. A Catalyst 4503 only is sho wn in the examples. Power Flow Figure 1-21 sho ws power ingress and flo w t[...]

Chapter 1 Product Overview System Architecture 1-44 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 2800 W A C, 4200 W AC or 1 400 W DC) also provide a –48 V cir cuit (shown as a dashed line) to PoE-en abled switching m odules, which is then av ailable to the po wered device conn ected to the switching module. Note The Supervisor En[...]

1-45 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview System Architecture PoE Over-subscription W it h the advent of powered devices requir ing as much as 15.4 W and the different combinations of po wer supplies and chassis port densities, it becomes quite possible to ov er-subscribe the PoE capacity o f the [...]

Chapter 1 Product Overview System Architecture 1-46 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Although references to “PoE, ” “inline-po wer , ” and “voice” po wer supplies and line cards are synon ymous, there are only tw o version s: Cisco prestandard and IEEE 802.3af compliant. Every Cisco Catalyst 4500 series chas[...]

1-47 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview System Architecture 4200 W of redundant data and PoE are required for a Cisco Catalyst 4500 Series chassis in an A C-powered en vironment, Ci sco offers an extern al A C po wer shelf that houses two 2500 W AC po wer supplies. W hen two po wer shelves are c[...]

Chapter 1 Product Overview System Architecture 1-48 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Catalyst 4503 with a sing le 15A circuit. Like wise, it is possible to deploy a fu lly populated Cisco Catalyst 4510R with two 20A and one 15A circuits rather than a single 60A co nnection, which often requires rack rewiring. Management[...]

1-49 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview System Architecture • Cisco Group Management Protocol support stan dards-based and Cisco technology -enhanced eff icient multimedia networking. • Simple Network Manageme nt Protocol (SNMP). • CiscoW orks, which can m anage critical network characteri[...]

Chapter 1 Product Overview System Architecture 1-50 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 1 -23 Switc hing T r affic Flo w Frames flo w into the switch through interf aces on the switching modules. Each switching module connects t o a mux/buf f er on the backplan e that supports a connection of up to 6 Gbps up (Tx) t[...]

1-51 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 1 Product Overview System Architecture Ethernet link to the internal switch f abric. If the amount of data recei ved for a port begins to e xceed buf fer capacity , flow control sends pause frames to the remote port to temporarily stop t raff ic and prev ent frame loss. Each[...]

Chapter 1 Product Overview System Architecture 1-52 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08[...]

CH A P T E R 2-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 2 Preparing for Installation War ni ng This unit is intend ed for installation in restricted access areas. A restricte d access area can be ac cessed only through the use of a special tool, lock and key , or other means of security . Statement 1017 War ni ng Only trained[...]

Chapter 2 Preparing for Installation Electrostatic D ischarge 2-2 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 If you will be using your switch as a PoE source, the follo wing warning applies: War ni ng V oltages that present a shock hazard can exist on inline power circuits if interconnections are m ade by using uninsulated exp os[...]

2-3 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Electrostatic Disc harge Sometimes, v oltage is dischar ged to some of the pin s of the connector and not others, or to some pins on the con nec tor before others. This is kno wn as a dif ferential discharge e vent, which can damage the networkin [...]

Chapter 2 Preparing for Installation Site Power Requirements and Heat Dissipation 2-4 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 • When removing a component, use any a v ailable ejector le vers or captiv e installatio n screws to release the bu s connectors from the backplane or midplane. • Handle carriers by a vailable handl[...]

2-5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Power Connection Guideline s for AC-Powered Systems Power Connection Guidelines for AC-Powered Systems This section pro vides guidelines for connecting the Catalyst 4500 series switch A C power supplies to th e site po wer source. Basic guidelines[...]

Chapter 2 Preparing for Installation Power Connection G uidelines for AC-Powered Systems 2-6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 • 1400 W— Ta b l e 2-1 lists the A C-input po wer cord options, speci fications, and Cisco pro duct numbers, an d sho ws the di f ferent styl es of 1400 W A C-input power cord wall plugs that[...]

2-7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Power Connection Guideline s for AC-Powered Systems Italy CAB-C2316-C15-IT= (was CAB-7A CI=) 8.2 ft (2.5 m) 250 V A C, 16 A 1/3/16 CEI 23-16 United Kingdom CAB-BS1363-C15-UK= (was CAB-7A CU=) 8.2 ft (2.5 m) 250 V A C, 13 A BS 89/13 BS 1363/A Arg e[...]

Chapter 2 Preparing for Installation Power Connection G uidelines for AC-Powered Systems 2-8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Italy CAB-C2316-C19-IT= (was CAB-7513A CI=) 14 ft (4.3 m) 250 V A C, 16 A 1/3/16, CEI 23-16 United Kingdom CAB-BS1363-C19-UK= (was CAB-7513A CU =) 14 ft (4.3 m) 250 V A C, 13 A BS 89/13 BS 1363/A[...]

2-9 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Power Connection Guideline s for AC-Powered Systems South Africa, India CAB-BS546-C15-SA= (was CAB-7513A CSA ) 13.6 ft (4.1 m) 250 V A C, 16 A BS 456 International CAB-A C-2800W -INT= 13.6 ft (4.1 m) 250 V A C, 16 A IEC 309 2800 W Power Supply (PW[...]

Chapter 2 Preparing for Installation Power Connection G uidelines for AC-Powered Systems 2-10 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Arg entina CAB-IR2073-C19-AR= (was CAB-7513A CR= ) 14 ft (4.3 m) 250 V A C, 10 A IRAM 2073 International CAB-A C-2800W -INT= 13.6 ft (4.1 m) 250 V A C, 16 A IEC 309 4200 W Power Supply (PWR-C45-[...]

2-11 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Power Connection Guideline s for AC-Powered Systems Europe CAB-CEE77-C19-EU 13.2 ft (4.0 m) 250 V A C, 15 A CEE 7/7 International (including Arge ntina and South Africa) CAB-I309-C19-INT 13.6 ft (4.1 m) 250 V A C, 16 A IEC 309 Australia CAB-A3112[...]

Chapter 2 Preparing for Installation Power Connection G uidelines for AC-Powered Systems 2-12 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Israeli CAB-S132-C19-ISRL 14 ft (4.3 m) 250 V A C, 16 A SI32 UPS 220V CAB-C19-CBN 9 ft (2.74 m) 250 V A C, 20 A IEC-60320-C20 T able 2-1 AC-Input P ower Cord Options (continued) Locale Part Numb[...]

2-13 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Power Connection Guideline s for DC-Powered Systems Power Connection Guidelines for DC-Powered Systems This section pro vides the basic gui delines for connec ti ng the Catalyst 4500 series switch DC-input po wer supplies to the site po wer sourc[...]

Chapter 2 Preparing for Installation Power Connection G uidelines for DC-Powered Systems 2-14 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Calculating DC Input Current Complete po wer usage tables are in t he Catalyst 4500 Series Mod ule Installatio n Guide. T o calculate the DC input current needed for data and inl ine power appli[...]

2-15 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Ventilation Step 6 Add t he DC input current used b y data and the DC input curr ent used by inl ine de vices to find the total DC input current. • T otal DC input current = 6.14 + 1.4 = 7.54 A. Ventilation Planning a proper location for the sw[...]

Chapter 2 Preparing for Installation Ventilation 2-16 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Appendix A, “Specif ications, ” lists the operating and nonoperati ng en vironmental site requi rements for th e switches. T o ma intain normal operation and ensure high system a vailabili ty , maintain an ambient temperature and [...]

2-17 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 2 Preparing for Installation Site-Planning Checklist Note Although a class 3 de vice needs 15.4 W to po wer up, 17.3 W need to be generated from the backplane in order to hav e 15.4 W at the switch port. 17.3 W comes from the WS-X4248-RJ45V DC-DC con v erter’ s eff iciency[...]

Chapter 2 Preparing for Installation Site-Planning Checklist 2-18 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 3 Power e valuation: • Input po wer type • Receptacle proximity to the equipment • Dedicated (separate) ci rcuits for redund ant po wer supplies • UPS for po wer failures 4 Grounding e valuatio n: • Circuit break[...]

CH A P T E R 3-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 3 Installing the Switch in a Rack War ni ng This unit is intend ed for installation in restricted access areas. A restricte d access area can be ac cessed only through the use of a special tool, lock and key , or other means of security . Statement 1017 War ni ng Only tr[...]

Chapter 3 Installing the Switch in a Rack 3-2 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Note The blank line card (C4K-SLO T -CVR-E) must be installed when either of the follo wing two situati ons occur: • If your Catalyst 4507R o r Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine[...]

3-3 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Checking the Shipping Co ntainer Contents Note For informatio n on installing the supervisor engine and switching modul es and verifyin g switch opera tion, refer to the Catalyst 450 0 Series Module Installation Guide . For information o n co[...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-4 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Rack-Mounting the Switch A standard rack-mount k it is included for mounting the switch in a standard 19-inch (48.3 cm) equipment rack with two unobstru cted outer posts, with a nominal depth (b etween the front and r[...]

3-5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch Rack-Mounting Catalyst 4500 Series Switches Follo w these steps to install a Catalyst 4500 series switch in a rack: Step 1 Prepare for in stallation as follo ws: a. Place the chassis on the floor or on a sturdy table [...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Note Some equipment racks provide a po wer strip alon g the length o f one of the rear posts. If your rack has this feature, consider the position of the strip when planning f astener points. Before installing t he L [...]

3-7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch Figur e 3-1 L Brac kets on the F ront Edg e of the Catalyst 4503 Switc h 1 13 1 1 3 1 1 3 1 1 3 79182 4 5 0 6 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E R ESET U TILIZATION S T A T U S 45[...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-2 L Brac kets on the F ront Edg e of the Catalyst 4506 Switc h 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79183 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RE SET UTILIZ ATIO N S T A T [...]

3-9 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch Figur e 3-3 L Brac kets on the F ront Edg e of the Catalyst 4507R Switc h 68113 WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4[...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-10 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-4 L Brac kets on the F ront Edg e of the Catalyst 451 0R S witch c. Attach the cable guide, if needed, usin g the M3 screws pro v ided in the cable management kit. The cab le guide attaches to the L brack e[...]

3-11 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch Figur e 3-5 Attac hing the Cable Guide to the Catalyst 4503 Switch 1 1 3 1 1 3 1 1 3 1 1 3 79184 4 5 0 6 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RES ET UTILIZAT ION S T A T U S 4503 W[...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-12 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-6 Attac hing the Cable Guide to the Catalyst 4506 Switch 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79185 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RESET UT ILIZATION S T A T U S W S[...]

3-13 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch Figur e 3-7 Attac hing the Cable Guide to the Catalyst 4507R Switch 68114 WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 [...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-14 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-8 Attac hing the Cable Guide to the Catalyst 451 0R Switch Step 3 Install the chassis in the rack as follo ws: a. Insert the rear of th e chassis between the mounting posts. See Figure 3-9 to see ho w to in[...]

3-15 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch c. Secure the chassis using at least six (t hree per si de) 12-24 x 3/4-in ch screws through the elonga ted holes in the L bracket and int o the threaded holes in the mounting po st. d. Use a tape measure and le vel [...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-16 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-1 0 Installing a Catalyst 4506 Switc h in the Rack 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 79187 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RESET U TILIZATIO N S T A T U S W S - X [...]

3-17 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch Figur e 3-1 1 Installing a Catalyst 4507R Switch in the Rack 68115 WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 4 2 4 1[...]

Chapter 3 Installing the Switch in a Rack Rack-Mounting the Switch 3-18 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-12 Installing a Cataly st 451 0R Switc h in the Rack Step 4 Make sure that the ejector lev ers are comp letely closed and the supervisor engine and switching modules are inst alled securely . Step 5 T ighte[...]

3-19 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack System Ground Connectio n Guidelines Step 6 Conn ect the switch to an appropriat e ground. Refer to Syst em Ground Connectio n Guidelines, page 3-19 . The system must ha ve a ground connecti on before po wer is supplied to the switch. System[...]

Chapter 3 Installing the Switch in a Rack System Ground Connection Guidelines 3-20 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-14 Cataly st 4506 Grounding Holes 1 13 1 13 1 13 1 13 1 13 1 13 79480 45 0 6 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E R E S E T U T I L I Z A T IO N S T A T U S W [...]

3-21 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack System Ground Connectio n Guidelines Figur e 3-15 Cataly st 4507R Grounding Holes 79481 W S -X4 448-G B-R J4 5 S TA T US 12 11 10 9 8 7 6 5 4 3 2 1 14 13 16 15 28 27 26 25 24 23 22 21 20 19 18 17 30 29 32 31 44 43 42 41 40 39 38 37 36 35 34 [...]

Chapter 3 Installing the Switch in a Rack System Ground Connection Guidelines 3-22 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 3-16 Catalyst 451 0R Gr ounding Holes 93937 WS-X4448-GB-RJ45 STATUS 12 11 10 9 8 7 6 5 4 3 2 1 14 13 16 15 28 27 26 25 24 23 22 21 20 19 18 17 30 29 32 31 44 43 42 41 40 39 38 37 36 35 34 33 46 45 [...]

3-23 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack System Ground Connectio n Guidelines Parts and Required Tools Note Some parts and required tools described in this section are no t av ailable from Cisco Systems. The grounding lug and associated scre ws are included with the accessory kit. [...]

Chapter 3 Installing the Switch in a Rack System Ground Connection Guidelines 3-24 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Connecting System Ground and Power This section descri bes how to connect the Catalyst 4500 series sw itches to earth ground. The syst em ground connection is required if FXS modules are inst alled or if t[...]

3-25 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 3 Installing the Switch in a Rack System Ground Connectio n Guidelines Figur e 3-1 7 Connecting Syst em Ground on th e Switc h Step 5 Remo ve the label that cov ers the grounding pad. Step 6 Pl ace the grounding lug against the grou nding pad, aligning t he holes. Insert the[...]

Chapter 3 Installing the Switch in a Rack System Ground Connection Guidelines 3-26 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Step 7 T ighten the scre ws to secure the grounding lug to the grou nding pad. Step 8 Repeat steps 1 through 3 to prepare the other end of the groun ding wire and connect it to an appropriate grounding poi[...]

CH A P T E R 4-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 4 Removing and Replacing FRUs War ni ng Read the installation instruc tions before connecting the sy stem to the power source. Statement 1004 War ni ng Only trained and qualified pe rsonnel should be allowed to in stall, replace, or service this equipment. Statement 1030[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-2 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 This chapter tells yo u how t o remov e and replace Catalyst 4500 series field-replaceable units (FR Us). The inform ation is presented in t hese sections: • Removing and Replacing the Po wer Supply , pa[...]

4-3 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Figur e 4-1 AC-Input P ow er Supply Figur e 4-2 4200 W Dual-Input AC P ow er Supply Captive screws Power switch AC receptacle 79136 100-120V- 12A 50/60Hz Captive screws AC input 2 receptacle 130106 AC inpu[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-4 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 4-3 DC-Input P ower Supply Figur e 4-4 1400 W DC T riple-input P ower Supply Captive screw Captive screw In-line power s witch Serial communication connector Main power s witch T er minal block 791[...]

4-5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Required Tools Y ou will need a flathead or Phillip s sc rewdri ver to perfor m these procedures. Removing an AC-Input Power Supply Follo w these steps to remove the A C-input po wer supply: Step 1 Press t[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 4-6 Loosening the Sid e-Clamp Scr ew Step 3 Disco nnect the po wer cord from the po wer supply being remo ved. Step 4 Loo sen the two c apti ve scre ws (see Figure 4-7 ). Figur e 4-7 Loosening the [...]

4-7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Caution Use both han ds to grasp a power supply . Step 5 Grasp the power sup ply handle with one hand. Place you r other hand underneath to support the b ottom of the po wer supply , as sho wn in Figure 4-[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Installing an AC-Input Power Supply War ni ng The plug-socket combination must be accessible at all times, becau se it serves as the main disconnect ing device. Statement 1019 Follo w these steps to instal[...]

4-9 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Figur e 4-9 Plugging the P ower Cor d into the P ow er Supply Step 10 Connect the other end of the po wer cord to an A C-power input source. Caution In a system with mult iple po wer supplies, connect each[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-10 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Step 12 V erify power supply o peration by checking the po wer supply’ s front-panel LEDs. Y ou should see the followi ng: • The LED labeled GOOD is green. • The LED labeled F AIL is not lit. • Th[...]

4-11 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Removing a DC-Input Power Supply This section describes ho w to remove a DC-input po wer supply . Required Tools Y o u will need the following tools to perform this procedure : • A Phillips scre wdriver[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-12 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 4-1 1 DC-Input P ow er Supply Figur e 4-12 DC T r iple-input P ower Sup ply Captive screw Captive screw In-line power s witch Serial communication connector Main power s witch T er minal block 791[...]

4-13 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Step 5 Disco nnect the DC-input wires from the terminal bl ock. Disconnect the ground wire last (see Figure 4-13 or Figure 4-14 ). War ni ng When installing or replacing th e unit, the ground connection m[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-14 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Step 6 Using a scre wdriv er , loosen and remov e the capti ve scre ws on the power supply . (See Figure 4-15 , which sho ws the single input po wer supply . The triple-input power su pply has capti ve sc[...]

4-15 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Figur e 4-16 Handling a DC-Input P ow er Supply Step 8 If the bay is to remain empty , install a blank po wer supply f iller plate o ver the opening and secure it with t he mounting scre ws. This protects[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Power Supply 4-16 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Installing a DC-Input Power Supply This section descri bes how to install a DC-input po wer supply . Required Tools Y o u will need the following tools to perform this procedure : • A Phillips scre wdri[...]

4-17 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Power Supply Follo w these steps to install a DC-input po wer supply , connect it to a po wer source, and verify its operation: Step 1 V erify that po wer is off to the DC circuit or circuits on the power su pply you [...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Chassis Fan Assembly 4-18 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Step 8 V erify po wer supply operation by checking the po wer supply’ s front-panel LEDs. Y ou should see the followi ng: • The LED labeled INPUT OK is green. • The LED labeled OUTPUT F AIL [...]

4-19 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Ch assis Fan Assembly Figur e 4-1 7 Catalyst 4503 Syst e m F an Assembly 1 1 3 1 1 3 1 1 3 1 1 3 79172 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E R ESE T UT ILIZATION S T A T U S 4503 W S[...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Chassis Fan Assembly 4-20 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 4-18 Catalys t 4506 System F an Assembly 1 1 3 1 1 3 1 1 3 1 1 3 1 13 1 1 3 79171 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RES ET U TILIZ ATIO N S T A T U S[...]

4-21 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Ch assis Fan Assembly Figur e 4-19 Catalys t 4507R System F an Assembly 68116 Captive installation screws Fan assembly WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 [...]

Chapter 4 Remo ving and Replacing FRUs Removing and Replacing the Chassis Fan Assembly 4-22 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 4-20 Catalyst 451 0R S yst em F an Assembly Required Tools Y ou will need a Phillips scre wdriv er for the follow ing two procedures. 4 3 4 2 3 1 2 WS-X4448-GB-RJ45 STATUS 1 2 1 1 1 0 9 8 [...]

4-23 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Removing and Replacing the Ch assis Fan Assembly Removing the Fan Assembly War ni ng When removing the fan tray , keep your hands and fingers away from the spinning fan blades. Let the f an blades completely stop before you remove the fan tray [...]

Chapter 4 Remo ving and Replacing FRUs Replacing Backplan e Modules on a Catalyst 4507R or 4510R Switch 4-24 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Verifying the Installation Note T o check the operation of the fa ns, you need to po wer up the chassis. Follo w these steps to verify that the ne w fan assembly was installed cor[...]

4-25 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch Step 3 Remo ve all supervisor engines and switchin g modules from the chassis, and fi nd the backplane mo dules you need to replace. Note Keep a r ecord of switching modul eand the[...]

Chapter 4 Remo ving and Replacing FRUs Replacing Backplan e Modules on a Catalyst 4507R or 4510R Switch 4-26 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 4-21 Cata lyst 4507R Backplane Mux buff ers Clock module 130657[...]

4-27 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch Step 4 If you are removing a clock modul e, remov e the two scre ws that attach the module to the backplane. Step 5 Fi nd the seating le vers on both sides of the connecto r for th[...]

Chapter 4 Remo ving and Replacing FRUs Replacing Backplan e Modules on a Catalyst 4507R or 4510R Switch 4-28 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Step 7 Pull o ut the module while holding the top left and top right corners. (See Figure 4-24 .) Note When handling the modules, do not to uch the chips or the gold edge contacts[...]

4-29 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 4 Removing and Re placing FRUs Replacing Backplane Modules on a Catalyst 4507R or 4510R Switch Step 9 Mak e sure the module is fully seated. (See Figure 4-26 .) Figur e 4-26 Corr ect Module Seating Step 10 Push the module to ward the back of the ch assis and make sure it is [...]

Chapter 4 Remo ving and Replacing FRUs Replacing Backplan e Modules on a Catalyst 4507R or 4510R Switch 4-30 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Verify the New Modules After the switch is reassembled and po wer is restored, connect a terminal to the supervisor engine and mo nitor the boot process. Look for th e follo wing [...]

CH A P T E R 5-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 5 Troubleshooting If your system has problems during st art up or operation, use the informati on in this chapter to help isolate the cause. Prob lems with the initial startup are often caused by a switching module that has be come dislodged from the backplane or a power[...]

Chapter 5 Trouble shooting System Boot Verification 5-2 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Note This chapter co vers only the cha ssis component hardware aspects of troubleshooting. F or configuratio n issues , refer to the soft ware conf iguration guide or command reference for your switch. System Boot Verification When [...]

5-3 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Problem Solving to the System Comp onent Level Problem Solving to the System Component Level The ke y to success when troubleshooting the system is to isolate the problem to a specific system component. Y our first step is to comp are what the system is doin[...]

Chapter 5 Trouble shooting Using LEDs to Identify Startup Problems 5-4 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Using LEDs to Identify Startup Problems All system s tates in th e startup sequence are indicated using LEDs. By checking the LEDs, you can determine when and wh e re the system failed in the startup sequence. If you [...]

5-5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Using LEDs to Identify Startup Problems Step 4 V erify that the LEDs labeled S T A T US on each switching module are green when the supervisor engine completes in itialization. This LED indicates that the supervis or engine and switching mo dules are recei v[...]

Chapter 5 Trouble shooting Troublesho oting the Power Supply 5-6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Troubleshooting the Power Supply T o help isolate a po wer subsystem problem, follo w these steps: Step 1 Check whet her the po wer supply LED labeled GOOD is on or the LED labeled F AIL is on. (on the DC multi-input power [...]

5-7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Troubleshooting the Power Supply If you are un able to resolve the p roblem, or if you determine that either a power supply or backplane con nector is faulty , contact the Cisco T echnical Assistance Center (T A C ) for instructions. Troubleshooting Power Pr[...]

Chapter 5 Trouble shooting Troublesho oting the Fan Assembly 5-8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 The 1400 W DC multi-in put supply can not be used with o ther pow er supply types, b ut other pow er supplies in this product line w ork with the other types during an upgrade. If you mix po wer supplies in a Catalyst 4500 [...]

5-9 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Troubleshooting Backplan e Modules C4K_IOSMODPOR TMAN-4-F ANTRA YP AR TIALF AILURE C4K_IOSMODPOR TMAN-4-F ANTRA YREMO VED C4K_SUPER VISOR-3-F ANTRA YREADF AILED C4K_SUPER VISOR-3-F ANTRA YSEEPROMREADF AILED C4K_SUPER VISOR-3-F ANTRA YSEEPR OMINV ALID C4K_IOS[...]

Chapter 5 Trouble shooting Troublesho oting Switching Mo dules 5-10 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 • The switch po wers down and stays do wn for a few minutes to a fe w days for no clear reason. • The output-fail LED on the po wer supplies are red and no po wer is deli vered to the chassis. The other LEDs on the p[...]

5-11 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Troublesh ooting Switching Modules Figur e 5-2 1 0/1 0 0BASE-T P ort LEDs 17407 STATUS 4 1 2 3 4 5 5 6 6 7 7 8 8 9 9 10 10 11 12 11 12 WS-X4148-RJ 4 PORT 10/100 B Ta b l e 5-1 Switching Module LEDs LED Color/State Description ST A TUS Indica tes the results[...]

Chapter 5 Trouble shooting Troublesho oting Switching Mo dules 5-12 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Troubleshooting Switching Modules Using Cisco IOS Connect a terminal to the console po rt, and look for any of the follo wing system messages: C4K_CHASSIS-3-LIN ECARDMUXBUFFER TOSUP ALIGNMENTWR ON G C4K_CHASSIS-3-LIN ECA[...]

5-13 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Troubleshooting S upervisor Eng ines Troubleshooting Supervisor Engines This section only addresses pro blems with hardware. Problems with f eatures or confi guration are not co vered here. Refer for yo ur software conf iguration guide and release notes for[...]

Chapter 5 Trouble shooting Troubleshooting Supe rvisor Engines 5-14 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Troubleshooting Supervisor Engines Using Cisco IOS Connect a terminal to the console po rt, and look for any of the follo wing system messages: C4K_CHASSIS-3-LIN ECARDMUXBUFFER TOSUP ALIGNMENTWR ON G C4K_SUPER VISOR-3-MU[...]

5-15 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Troubleshooting S upervisor Eng ines C4K_REDUND ANCY -2-HANDSHAKE_TIMEO UT C4K_REDUND ANCY -2-POSTF AIL_RESET C4K_REDUND ANCY -2-INCOMP A TIBLE_SUPER VISORS C4K_REDUND ANCY -2-IOS_VERSION_CH ECK_F AIL C4K_REDUND ANCY -2-IOS_VERSION_INCOMP A TIBLE C4K_REDUND[...]

Chapter 5 Trouble shooting Contacting the Cisco Techn ical Assistanc e Center 5-16 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Some problems can be solv ed by rese tting the supervisor engine. Use the hw-module module <n> r eset power -cycle command to reset a swit ching module, or remo ve and re-insert the swit ching module[...]

5-17 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Contacting the Cisco Techn ical Assistance Center See the “Obtaining Documentation and Sub mitting a Service Request” section on page 17 for more information about contacting the T A C. Serial Numbers When you contact Cisco T echnical Assist ance, have [...]

Chapter 5 Trouble shooting Contacting the Cisco Techn ical Assistanc e Center 5-18 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 5-4 Catalyst 4506 Serial Number Location 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 105729 4 5 0 6 U P L IN K 1 U P L IN K 2 A C T IV E L IN E A C T IV E L IN E A C T IV E RES ET UT ILIZATIO N S T A T U S[...]

5-19 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Chapter 5 Troubleshooting Contacting the Cisco Techn ical Assistance Center Figur e 5-5 Catalyst 4507R Serial Number Location 105730 WS-X4448-GB-RJ45 S T A TU S 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 4 1 3 1 6 1 5 2 8 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0 1 9 1 8 1 7 3 0 2 9 3 2 3 1 4 4 4 3 4 2 [...]

Chapter 5 Trouble shooting Contacting the Cisco Techn ical Assistanc e Center 5-20 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 Figur e 5-6 Catal yst 451 0 R Ser ial Numbe r Location 113784, 781-00251-01A0 W S - X 4 4 4 8 - G B - R J 4 5 S T A T U S 12 11 10 9 8 7 6 5 4 3 2 1 14 13 16 15 28 27 26 25 24 23 22 21 20 19 18 17 30 29 32[...]

A-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 APPENDIX A Specifications Cable and technical specifications for Catalyst 4500 series switc hes are provided in the follo wing sections: • Catalyst 45 03 Switch Speci f ications, pa ge A-2 • Catalyst 45 06 Switch Speci f ications , page A-3 • Catalyst 45 07R Switch Sp ecificati[...]

Appendix A Specifications Catalyst 4503 Switch Specifications A-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalyst 4503 Switch Specifications Ta b l e A-1 lists the Catalyst 4503 switch specificatio ns. Ta b l e A -1 Cataly st 4503 Switc h Specifications Item Specification Environmental T emperature, ambient operating 32 to 104[...]

A-3 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4506 Switch Specifications Catalyst 4506 Switch Specifications Ta b l e A-2 lists the Catalyst 4506 switch specificatio ns. Airflow Switch Right to left Pow er supply Front to back Power PoE supplied –48 VDC Power to Modules and fans 12 VDC Pow er[...]

Appendix A Specifications Catalyst 4506 Switch Specifications A-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Switching Components Backplane 60 Gbps full duple x 4 Gbps Uplinks Port density 240 (max) Inline power integrated support, 820 W per line card Phy sical Characteristics Dimensions (H x W x D) • 17.38 x 17.31 x 12.50 in. ([...]

A-5 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4507R Switch Specifications Catalyst 4507R Switch Specifications Ta b l e A-3 lists the Catalyst 4507R switch sp ecifications. Ta b l e A -3 Catalyst 4507R Switch Specifications Item Specification Environmental T emperature, ambient operating ambien[...]

Appendix A Specifications Catalyst 4507R Switch S pecifications A-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note The blank line card (C4K-SLO T -CVR-E) must be installed when either of the follo wing two situati ons occur: • If your Catalyst 4507R o r Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) o[...]

A-7 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4510R Switch Specifications Catalyst 4510R Switch Specifications Ta b l e A-4 lists the Catalyst 4510R switch specif ications. Ta b l e A -4 Catalyst 451 0R S witch Specification s Item Specification Environmental T emperature, ambient operating amb[...]

Appendix A Specifications Catalyst 4510R Switch S pecifications A-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note The blank line card (C4K-SLO T -CVR-E) must be installed when either of the follo wing two situati ons occur: • If your Catalyst 4507R o r Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) o[...]

A-9 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4500 Series Power Supplies Catalyst 4500 Series Power Supplies Ta b l e s A-5 through A-12 list the specif icati ons fo r the Cata lyst 4500 series po wer supplies. Note All Catalyst 4500 series switch A C-input po wer supplies require single-phase [...]

Appendix A Specifications Catalyst 4500 Series Power Supplies A-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Ta b l e A- 5 10 0 0 W A C-Input P ower S upply Specifications Item Specification Minimum softw are requirement Cisco IOS Release 12.1(12c)EW Catalyst Operating Syst em software ver sion 7.4 (1) Power o ver Ethernet Not su[...]

A-11 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4500 Series Power Supplies Pow er supply output 1300 W maximum 1000 W+ 40 W redundant mode (Dat a) 1667 W maximum in combined mod e (Data) 800 W maximum each in redundant mode (PoE) 1333 W maximum in combined mod e (PoE) Pow er supply output (A C s[...]

Appendix A Specifications Catalyst 4500 Series Power Supplies A-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Caution Do not mix the 1400 W DC pow er supply with an y other po wer supply , ev en for a hot swap or other short-term emergenc y . Doing so can seriously damag e your switch. The 1400W DC Input po wer supply may be used [...]

A-13 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4500 Series Power Supplies DC-input current Data only: 31 A @ –60 VDC Data and inline de vices: 180 A maximum @ –48 VDC input Note The input power is configurable in the CLI. The Cisco IOS command is power dc input . The Cataly st Operating Sys[...]

Appendix A Specifications Catalyst 4500 Series Power Supplies A-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Cataly st 4503-Specific Power Usage (data only) Maximum dra w 475 W Maximum input 633 W Current dra w at –40.5 V ( mi n vo lt a ge ) Current dra w at –72 V (max voltage) 15.6 A 8.8 A Max heat dissipation at 6 33 W 2160[...]

A-15 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4500 Series Power Supplies Ta b l e A -9 140 0 W DC T riple-In put P ow er Supply Specifications Item Specification Minimum softw are requirement Cisco IOS Release 12.2(25)EW Power o ver Ethernet Not supported DC-input voltage Domestic and internat[...]

Appendix A Specifications Catalyst 4500 Series Power Supplies A-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalyst 4503-Specific P ower Usage (data only) T wo modules minimum required @ –40.5 VDC input One 15A module mini mum required @ –44 VDC i nput Maximum dra w 475 W Maximum input 609 W total / # of modules = W per mod[...]

A-17 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4500 Series Power Supplies Ta b l e A- 10 I n p u t M o d e s Input Mode Input Number Input Configuration Maximum T otal Output Power 1 1 1 x 12.5 A 386 W @ –40.5 VDC 412 W @ –44.0 V DC 2 2 OR 3 1 x 15 A 466 W @ –40.5 VDC 495 W @ –44.0 VDC [...]

Appendix A Specifications Catalyst 4500 Series Power Supplies A-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Ta b l e A -12 280 0 W A C-Input P ower Supp ly Specifications Item Specification Minimum softw are requirement Cisco IOS Release 12.1(13)EW Catalyst Operating System so ftware version 7.5 (1) Power o ver Ethernet Supporte[...]

A-19 Catalyst 4500 Series Switches Installation Gui de 78-14409-08 Appendix A Specifications Catalyst 4500 Series Power Supplies Note The 4200 W A C power supply shou ld not be used in mixed-v oltage confi gurations. All the inp uts in a ch assis must be at the same voltage (110 VA C or 220 VA C ) . Ta b l e A -13 420 0 W A C-Input P ower Supp ly S[...]

Appendix A Specifications Catalyst 4500 Series Power Supplies A-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Ta b l e A-14 sho ws the wattage output possibl e with the 4200W po wer supply in redundant mode. In redu ndant mode, both po wer supplies must hav e identical inputs and all inputs must b e at the same voltage. If the inp[...]

B-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 APPENDIX B Repacking a Switch If you need to return your Catalyst 4500 series switch to the fa ctory , use the instructions in this appendix to repack your switch i n preparation for shipping. T o repack the switch using the original packag ing material, follo w these steps: Step 1 S[...]

Appendix B Repacking a Switch B-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e B-1 Catalys t 4500 Ser ies Switc h Pa ckin g Mater ial Packing carton Packing foam Packing foam Packing foam Documentation and accessories 68117[...]

IN-1 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 INDEX Numerics 10/100BASE-T port LEDs 11 1000BASE-T interfaces 3, 7, 11, 16 1000BASE-X Ethernet interfaces 21 port and status LEDs (figure) 10 1000 W power supplies power cord plugs 5 power cords (table) 6 100BASE-T interfaces 3, 7, 11, 16 10BASE-T interfaces 3, 7, 11, 16 1300 W pow[...]

Index IN-2 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 autonegotiation Catalyst 4503 switches (table) 3 Catalyst 4506 switches (table) 7 Catalyst 4507 switches (table) 11, 16 B boot process troubleshooting 2 brackets See L brackets C cables ESD 2 Catalyst 4503 switches attaching c able guides ( figure) 13, 14 attaching L brackets [...]

IN-3 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Index D DC-input power supplies connecting system ground 24 description 34 environmental monito ring 38 figure 35, 36, 4 handling (figure) 15 installing 16 removing 11 replacing 16 See also AC-input power suppli es troubleshooting 6 verifying operation 18 dimensions Catalyst 4503 sw[...]

Index IN-4 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 field-replaceable units See FRUs Flash code troubleshooting 5 FRUs AC-input power supplies 5 to 10 DC-input power supplies 11 to 18 fan assemblies 18 to 24 G Gigabit Ethernet See 1000BASE-T See 1000BASE-X GOOD LEDs checking 10 troubleshooting 6 verifying power supply status 18[...]

IN-5 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Index checking supervisor engines 2 See also specific types of LEDs Link LED description (table) 27 LINK LEDs (table) 11 load sharing, power supplies 38 M MAC addresses supported on Ca talyst 4503 sw itches (table) 20 management local, on Catalyst 4503 switches 3 local, on Catalyst [...]

Index IN-6 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08 S serial numbers 16 shipping instructions 1 show system command 10 site planning checklist 17 slots Catalyst 4503 switches (fig ure) 3 Catalyst 4506 switches (fig ure) 7 Catalyst 4507 switches (fig ure) 11, 16 specifications Catalyst 4503 switches (table) 2 Catalyst 4506 switc[...]

IN-7 Catalyst 4500 Series Sw itches Installation Guide 78-14409-08 Index UTILIZATION LEDs description (table) 27 V voltage specifications 12, 15 W weight Catalyst 4503 switches (table) 2 Catalyst 4506 switches (table) 4 Catalyst 4507 switches (table) 5, 7[...]

Index IN-8 Catalyst 4500 Series Swit ches Installation Guide 78-14409-08[...]