Cisco Systems ata 186 Bedienungsanleitung

Corporate He adquarters Cisco System s, Inc . 170 West Ta sman Drive San Jos e, CA 95134 -1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco A T A 1 86 and Cisco A T A 1 88 Analog T elephone A daptor A dministrator ’ s Guide f or MGCP (v er sion 3.0) Text Pa rt Num ber: OL -4803-01[...]

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUC[...]

iii Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 CONTENTS Object ives ix Audienc e ix Organi zation an d Use x Organi zation x Conv enti ons x Relat ed Do cume ntatio n xiv Obtain ing Docu mentati on xv Cisco. com xv Document ation C D-ROM xv Orderi ng Documenta tion xv Doc[...]

Cont ent s iv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Safety Reco mmendation s 2-2 What the Ci sco ATA Packag e Includ es 2- 2 What You Nee d 2-3 Instal lati on Pro cedu re 2-3 Power-Do wn Procedur e 2-6 CHAPTER 3 Configur ing the Cisco ATA for MGCP 3-1 Defaul t Boot Lo [...]

Content s v Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Config urin g Refresh I nterval 4-2 Additi onal MGCP Servi ces 4-3 Endpoi nts and Connecti ons 4-3 MGCP Endp oint De vice Type 4-4 Call Age nt Redun dancy with Configur ation Par amete rs 4-4 Cisco ATA Re gistra tion [...]

Cont ent s vi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 VLAN Setti ng 5-11 MGCP C onfigur ation Parameter s 5-12 CA0orCM0 5-12 CA1orCM1 5-13 CA0UID 5-13 CA1UID 5-14 EPID0or SID0 and EPI D1orS ID1 5-14 PrfCod ec 5-15 LBRCodec 5-15 MGCPPort 5-16 Medi aPo rt 5-17 Retx Intvl 5[...]

Content s vii Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 AlertT one 5-39 RingCad ence 5-4 0 Diagnos tic Para meters 5-40 NPrint f 5-40 TraceF lags 5- 41 Syslog IP 5-41 Syslog Ctrl 5-42 CFGID—Ve rsio n Parameter for Cisco A TA Configu ration Fi le 5-43 CHAPTER 6 Configur[...]

Cont ent s viii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Upgrade Pro cedure 7-4 Confi rming a Su cces sful S ignal ing Image U pgra de 7-5 Using a We b Browser 7-5 Using th e Voice Configur atio n Menu 7-5 CHAPTER 8 Troubles hootin g 8-1 General Troub leshoot ing Tips 8-1[...]

ix Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Preface This pre face inc ludes the foll ow ing secti ons: • Obje cti v es, pa ge ix • Audien ce, pa ge ix • Or gan izati on and Use, page x • Con ventions, pa ge x • Related D ocume ntation , page xiv • Obtain ing[...]

x Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Preface Organiza tion and Use Organization and Use Organization Ta b l e 1 provid es an overview of the organization of this guide. Conven tions This docu ment u ses t he fol lowing conventions : • Altern ativ e keywords are gr[...]

xi Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Pre face Convent ions • Optiona l altern ative ke ywords a re group ed in bracket s and se parated by vertical b ars ( for example, [ x | y | z ]). • T ermi nal sessions and info rmation the system displays ar e in screen [...]

xii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Preface Conv ent ions Va r o it u s TÄRKEITÄ TURV ALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa. T ilanne voi ai heuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitt eistoa, huomioi sähköpiirien käsittelemi[...]

xiii Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Pre face Convent ions Av is o INSTR UÇÕES IM PORT ANTES DE SEGURA NÇA Este símbolo de aviso significa perigo. V ocê está em um a situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilizaçã[...]

xiv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Preface Related Documenta tion Related Documentation Use this guide in conjunction with these documents: • Cisco AT A 186 an d Cisco A T A 188 Anal og T el ephone Adapto r At a Glance • Re gulato ry Complian ce and Safety I[...]

xv Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Pre face Obtaining Documentation Applicable RFCs • RFC768 ( Use r Datagram Protocol ) • RFC971 ( Survey of D ata Rep r esentati on Sta ndar ds ) • RFC1350 ( Th e TFTP Pr otocol ( Re vision 2 )) • RFC1890 ( R TP Prof il[...]

xvi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Preface Obtain ing Technical Assista nce Y ou can ord er Cisco documen tation in th ese ways: • Re gister ed Cisc o.com u sers (Cisco di rect cu stome rs) can or der Cis co pro duct do cumen tation from the Ne tworking Produ [...]

xvii Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Pre face Obtainin g Techni cal Assistan ce T o obtai n customized information and service , you can self-re gister on Cisco.com at this URL: http://www .cisco.com Technica l Assista nce Center The Cisco T AC is av ai lable t[...]

xviii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Preface Obtainin g Additi onal Publicat ions and Info rmation Before ca lling, ple ase check w ith your ne twork opera tions ce nter to deter mine the le v el of Cisco sup port service s to whi ch your c ompan y is entitle d:[...]

C HAPTER 1-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 1 Cisco Analog Telephone Adaptor Overview This secti on describe s the hardwar e and software features of the Cisco Analo g T eleph one Adap tor (Cisco A T A) and in cludes a bri ef overview of the Media G ateway Cont[...]

1-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Overview of Media Gateway Control Protocol Figur e 1 -2 The Cisc o A T A 18 6 as an Endpoi nt in an MGCP Networ k Figur e 1 -3 The Cisc o A T A 18 8 as an Endpoi nt in an MGCP [...]

1-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Hard ware Overv iew • Determi nes the a v aila bility of the tar get e ndpoint. • Establishes a sessio n between the orig inating and ta rget en dpoint if a call ca n be [...]

1-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Hardwa re Overview The unit provides t he fol lowing conne ctors and ind icators : • 5V po we r connec tor . • T wo RJ-11 FXS (Foreign Ex change Station) ports —The Cisco[...]

1-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features Note If the func tion button blinks sl o wly , the Cisco A T A ca nnot find th e DHCP s erver . Check you r Ether net conne ctions and m ake sure t he DH CP[...]

1-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures • G.729A • G.729B • G.729.AB Additional Su pported Sign aling Protocols In addi tion to M GCP , t he Cisco A T A suppo rts th e following sign aling pr[...]

1-7 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features • Conf igurable tone (dial tone, b usy tone, conf irm tone, re order tone, call w aiting tone) • IP address assig nment—D HCP-provided or statically c[...]

1-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures Supplementary Services that the Call Agent Provides The Cisco A T A supports the follo wing services th at are provid ed by the Call Agent: Note For end- use[...]

1-9 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Installati on and C onfigurat ion Overvie w Installation an d Configurati on Overview Ta b l e 1 - 2 provid es the basic steps required to insta ll and config ure the Cisco A[...]

1-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Installa tion and Con figuration O verview[...]

C HAPTER 2-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 2 Installing the Cisco ATA This secti on provides instruc tions for instal ling the Cisco A T A 186 and Cisco A T A 188. B efore you perform the installa tion, make sure you ha ve met the follo win g prerequisites: ?[...]

2-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 2 Insta lling the Cisco ATA Netwo rk Requiremen ts Network Requi rements The Cisc o A T A acts as a n endpoint in an IP telephony network. The following equip ment is requ ired: • Call Control system • V oice packet[...]

2-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 2 Insta lling the Cisco ATA What Y ou Need • Re gulato ry Complian ce and Safety In formation for th e Cisco AT A 186 and Cisco AT A 1 88 • 5V po wer ad aptor • Po wer co rd Note The Cisco A T A is intended f or [...]

2-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 2 Insta lling the Cisco ATA Installa tion Proced ure Figur e 2-1 Cis co A T A 1 86 Rear P a nel Connectio ns Figur e 2-2 Cis co A T A 18 8 Rear P anel Connections Proc edure Step 1 Place the Ci sco A T A near an elec tr[...]

2-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 2 Insta lling the Cisco ATA Install atio n Procedu re If you ar e connec ting a t elephone set that was p reviously conne cted to a n active telephone line, unp lug the tel ephone line cord f rom the wall jack and plug[...]

2-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 2 Insta lling the Cisco ATA Power-D own Procedu re For more information abo ut LEDs and the function b utton, see the “Hardw are Ov ervie w” section on page 1-3 . Power-Down Procedure Cautio n If you nee d to power [...]

C HAPTER 3-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 3 Configuring the Cisco ATA for MGCP This sec tion desc ribes h o w to co nfigure the Cisc o A T A to op erate with the M GCP sign aling i mage an d ho w the Cisco A T A obtains the latest signaling image. Y ou can co[...]

3-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Defaul t Boot Load B ehavior • Cisco A T A W e b Co nfi gur ation Page, p age 3-2 3 —This section shows the Cisco A T A W eb configurati on page and c ontains a proc edure fo[...]

3-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Specif ying a Pr econfig ured VLAN ID or Disabl ing VLAN IP Enc apsulat ion 3. Also fro m the DHCP serv er , the Cisco A T A request s the IP address o f the TFTP serv er . 4. The[...]

3-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Specifyin g a Preconfig ured VLAN ID or Disabling VLAN IP Encapsu lation N/A indicates th at the v ariable is not applicab le to the fe ature an d the se tting of this vara ible [...]

3-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Steps Nee ded to C onfigur e the Cis co ATA In hexade cimal format , this v alue is 0x0 0000052 . Step 2 Set bits 18-29 of the VLANSe tting parameter to to v oice VLA N ID 115. Th[...]

3-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Steps Nee ded to Configur e the Cisco ATA T able 3-3 Basic St eps t o Config ur e the Cisco A T A in a TFTP En vir onment Action R efer ence 1. Do wnload the desired Cisco A T A [...]

3-7 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Steps Nee ded to C onfigur e the Cis co ATA Basic Config uration Steps in a Non-TFTP Se rver Enviro nment Ta b l e 3 - 4 shows th e basic steps for conf iguring the Cisco A T A wi[...]

3-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Configur ing the Cisco ATA Using a TFTP Ser ver Configuring the Cisco AT A Using a TFTP Server The TFT P meth od of configuration is use ful when you hav e many Cisc o A T A beca[...]

3-9 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Configur ing the C isco ATA Using a TFT P Server For an exa mple o f how to configur e para meters f or the TFTP Server con f igura tion method, see th e “Creat ing Uniqu e and [...]

3-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Configur ing the Cisco ATA Using a TFTP Ser ver Step 4 Use the mgcp_ex ample.tx t f ile aga in, thi s time as a templa te for c reating a text fi le of v a lues that are specifi[...]

3-11 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Configur ing the C isco ATA Using a TFT P Server Exam ple cfgfmt - mgcp -tpt ag. da t ata0a141e28323c.t xt ata0a141e28323c This exam ple is based on a Cisc o A T A MAC address o [...]

3-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Configur ing the Cisco ATA Using a TFTP Ser ver The fo llo wing command an d output show an example of this comm and. Comm and Exam ple atapname.exe 10.20.30.40.50.60 Comm and O[...]

3-13 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Configur ing the C isco ATA Using a TFT P Server This section con tains the follo wing topics: • Configurati on Files that the cf gfmt T ool Creates, pa ge 3-13 • cfgfmt T oo[...]

3-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Configur ing the Cisco ATA Using a TFTP Ser ver cfgfmt To ol Syntax a nd Examples The synta x of the cfgfmt tool follows: Syntax cfgfmt [options] input output Syntax Definitions[...]

3-15 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Configur ing the C isco ATA Using a TFT P Server Synt ax examp les The c fgfmt. ex e sy ntax af fects ho w th e Encr yptK ey Ex o r Encr yptK ey param eters are us ed, a s sho wn[...]

3-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Configur ing the Cisco ATA Using a TFTP Ser ver Step 3 Set the value of the Encrypt Ke yEx pa rameter t o the c hosen e ncryption key with whi ch you want the output binary file[...]

3-17 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Configur ing the C isco ATA Using a TFT P Server Example 2 In th is ex ampl e, a ne w Ci sco A T A has alre ady b ee n depl oy ed (wit h the Encr yptK e y v alue set) wit h a fir[...]

3-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Configur ing the Cisco ATA Using a TFTP Ser ver Configuring the Cisco ATA to Obtain its Configuration File fr om the TFTP Server This section describes three method s for ho w t[...]

3-19 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Configur ing the C isco ATA Using a TFT P Server This com pletes the pa ramete r settings and DHCP opti ons you need to configure for this procedu re. The Cisco A T A will contac[...]

3-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Voice Co nfiguration Menu Without Using a DHCP Server Use the follo wing pro cedure if you are not using a DHCP serv er in your en vironment b ut are still using a TFTP ser ver [...]

3-21 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Voice C onfigu ration Me nu Note Do no t use the voice configuration menu to a ttempt t o change a ny v alues tha t you configure d by means of the TFTP co nfiguration file metho[...]

3-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Voice Co nfiguration Menu Step 4 Foll o w the vo ice prompt s and enter the ap propriat e v alues, th en press the # key . Note Use the * key to ind icate a del imiter (d ot). F[...]

3-23 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Cisco ATA Web Co nfigur ation Pa ge Using Ta b l e 3 - 7 as a gu ide, e nter the a ppropriat e number key on the tele phone keypad as m any times a s needed to sel ect t he numb [...]

3-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Cisco ATA We b Configuration Pa ge Note Do not use the web co nfiguration page to att empt to c hange any values that you configure d by means of the TFTP conf iguratio n file m[...]

3-25 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 3 Conf iguring the Cisco AT A for MGCP Refreshing or Resetting the Cisco ATA Follow these ste ps to set paramete rs using the web c onfiguration page: Proc edure Step 1 Make sure that your PC and the Cisc o A T A ar e[...]

3-26 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 3 Config uring th e Cisco AT A for MGCP Obtainin g Cisco ATA Confi guration File Aft er Failed Attem pt Procedure to Refresh the C isco ATA T o re fresh the Cisco A T A, enter t he foll o wing comman d from your w eb [...]

C HAPTER 4-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 4 Cisco ATA-Supported MGCP Services This sec tion pro vides info rmation abou t basic and additional M GCP services that the Cisco A T A supports: • Import ant Basic MGCP Ser vices, pag e 4-2 —This sect ion includ[...]

4-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices Importan t Basic MGC P Services Important Basic MGCP Services This se ction pr ovides descri ptions a nd cross r eferenc es for c onfiguring re quired M GCP para meters a nd also [...]

4-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 4 Cisco A TA-Supported MGCP Services Addit ional MGCP Services refreshi ng the Cisco A T A config uration f ile. Cisco reco mmends t hat the in terv al be se mi-random to pre v ent man y simulta neo us contact s with t[...]

4-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices Addition al MGCP Servi ces MGCP Endp oint Dev ice Type T o request the de vice ty pe from the Cisco A T A, the Call Agent must use the follo wing syntax in the Requested Info (F:)[...]

4-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 4 Cisco A TA-Supported MGCP Services Complete Refer ence Ta ble of all Cisco ATA MGCP Servi ces Synt ax Type 2 RSIP *@ ip_address MGCPVersion RM: restart Upon a succ essful respon se from the Call Agent to the RSIP com[...]

4-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices Com plete Refe renc e Tab le o f all Ci sco A TA M GCP Serv ices Fax pass-throug h AudioMode , page 5 -20 Connect Mode, page 5-24 G.711 codec AudioMode , page 5 -20 G.711 silence [...]

4-7 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 4 Cisco A TA-Supported MGCP Services Suppor ted MGCP Connecti on Modes Supported MGCP Connectio n Modes The Ci sco A T A suppor ts the f ollowing MGCP connect ion mod es: • SendOnly • RecvOnly • SendR ecv • Ina[...]

4-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices Supported Signals an d Events Note By default, hu, hd, and hf are set as pe rsistent e vents. Th ese e vents can be disabled b y setting bits 18 and 19 in the Cisc o A T A Conne c[...]

4-9 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 4 Cisco A TA-Supported MGCP Services Support ed Sign als and Events MGCP 0.1-1.0 L-Packag e Supported by the Ci sco ATA w ith MGCP MGCP 0.1-1.0 G-Package Supported b y the Cisco ATA w ith MGCP wt1, w t2, wt 3, wt4 Call[...]

4-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices Command s Support ed with MGCP MGCP 0.1-1.0 D-Package Supported b y the Cisco ATA w ith MGCP Commands Supported with MGCP The Cisco A T A supports the follo wing commands fo r co[...]

4-11 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 4 Cisco A TA-Supported MGCP Services Commands Supported with M GCP Parameters in Commands Sent to the Call Agent Parameters in Responses Sent to the Call Agent T able 4-6 P ar amet ers in Com mands Sent t o the Call A[...]

4-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices MGCP Embed ded Events Parameters in Commands Received from the Call Agent Processed by the Cisco ATA Parameters in Respon ses Receiv ed from the Call A gent Proces sed by the Cis[...]

4-13 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 4 Cisco A TA-Supported MGCP Services MGCP Embedde d Events The serv ice prov ider has the respon sibility of conf iguring the MGCP Call Agent. Example R: hd(A, E(S(dl), R(oc, [0-9#T](D)), D((1xxxxxxxxxx|9011x.T)))) In[...]

4-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 4 Cisco ATA-Su pporte d MGCP Serv ices MGCP Embed ded Events[...]

C HAPTER 5-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 5 Parameters and Defaults This se ction provides informat ion on the para meters and d efaults t hat you can use to cr eate yo ur own Cisco A T A c onfiguration file. This section also inc ludes th e voice configura t[...]

5-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Configur ation T ext File Templ ate – IP address (e .g. 192.168 .2.170) – Integer (32-bi t integer) – Numeric digit string Note Th e term Cisco A T A is use d througho ut this manu al [...]

5-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults User Interface (UI) Security Parameter CodecName:PCMU,PCMA,G723,G729 AudioMode:0x00350035 NumTxFrames:2 CallerIdMethod:0x00019e60 Polarity:0 FXSInputLevel:-1 FXSOutputLevel:-4 ConnectMo de:0x[...]

5-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Parameters for Configurat ion Meth od and Encryp tion Default 0 Voice Configuration Menu Access Code 7387277 Parameters fo r Configu ration Method an d Encryption This section describes para[...]

5-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Param eters fo r Configur ation Met hod and Encrypt ion TftpURL Description Use this par ameter to speci fy the IP addr ess or URL of the TFT P serv er . Th i s s t ri n g i s n ee d e d i f [...]

5-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Parameters for Configurat ion Meth od and Encryp tion Range 60 to 4294967 295 Default 3600 Voice Configuration Menu Access Code 80002 EncryptKey Description This paramete r specif ies the en[...]

5-7 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Param eters fo r Configur ation Met hod and Encrypt ion EncryptKey Ex Description This parameter specifie s an encryption k ey that is stronger than the ke y specif ied with the Encr yptK ey [...]

5-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Network Conf iguration Pa rameters Voice Configuration Menu Access Code Not applica ble for this parameter . Related Parameters • UseTFTP , page 5-4 • TftpU RL, p age 5- 5 • Encrypt Ke[...]

5-9 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Network Configuration Parameters Voice Configuration Menu Access Code 20 Related Parameters • StaticIp, page 5-9 • StaticRout e, page 5-9 • StaticNe tMask, pag e 5-10 • OpFlags, pa ge[...]

5-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Network Conf iguration Pa rameters Voice Configuration Menu Access Code 2 Related Parameters • DHCP , page 5-8 • StaticIp, page 5-9 • StaticNe tMask, pag e 5-10 StaticNetMask Descript[...]

5-11 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Network Configuration Parameters DNS2IP Description This para meter is fo r setting the secondary domain na me server (DNS) IP address, if the DHCP server does not provide on e. I f DHCP pro[...]

5-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s MGCP Configurat ion Parameters MGCP Configurati on Parameters This sec tion describ es the fol lo wing parameter s, which include Call Agent parameters: • CA0orCM 0, page 5 -12 • CA1orC[...]

5-13 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults MGCP Configuration Parameters CA1orCM1 Description Specify the altern ate Call Agen t in this parameter . This par ameter must b e an IP address or U RL and may inclu de a port par ameter . [...]

5-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s MGCP Configurat ion Parameters CA1UID Description Specify the ID of t he seco ndary Call Ag ent in th is paramet er . Valu e Type Alphanum eric stri ng Range Maxi mum 31 char acters EPID 0o[...]

5-15 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults MGCP Configuration Parameters PrfCodec Description This parame ter spec ifie s the defa ult pr eferred code c. The prefe rred c odec i s used only when t he Call Agent does not provide a lis[...]

5-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s MGCP Configurat ion Parameters • Codec[2]=G .729 (only if Bit 21 of the ConnectMode parameter is set to 0) • Code c[3] =G.729 A If LBRCo dec=3, then the P hone 2 FXS port can oper ate w[...]

5-17 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults MGCP Configuration Parameters MediaPort Description Use this paramet er to specify the b ase por t where the Cisc o A T A transmi ts and r ecei v es R TP media. T his parame ter must be an e[...]

5-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s MGCP Configurat ion Parameters Range 1 to 42949672 95 Default 10 Voice Configuration Menu Access Code 205 MGCP Ver Description Enter th e MGCP ve rsion strin g that the Cisco A T A should u[...]

5-19 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Audio Configuration Parameters Range Maxi mum 31 char acters Default . Voice Configuration Menu Access Code 931 Audio Configu ration Parameters :This secti on contains in formatio n about th[...]

5-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Audio Con figuration Parame ters Default Names • PCMU fo r G.71 1µ-law • PCMA for G. 711A-l aw • G723 fo r G.72 3.1 • G729 fo r G.72 9 Voice Configuration Menu Access Code Not appl[...]

5-21 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Operati onal Pa ramet ers NumTxFrames Description Use this paramete r to select the def ault R TP packet siz e in number of frames per packet. The Cisco A T A def ault frame si zes are as fo[...]

5-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Operation al Parameters • Bit 15—Use special char acter O . • Bit 16—Use special char acter P . Note Th e Cisco A T A supports the Bell core FSK method to tu rn on/off the visual me[...]

5-23 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Operati onal Pa ramet ers Exam ples The fol lo wing e xamples are reco mmende d v alues for the CallerI D Method par ameter: • Sweden = 0x0000ff61 or 0x006aff61 • Denmark = 0x 0000fde1 o[...]

5-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Operation al Parameters Range -9 to 2 dB Default -4 Voice Configuration Menu Access Code 371 Related Parameter FXSInputLevel, page 5-23 ConnectM ode Description This pa ramete r is a 32-bit[...]

5-25 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Operati onal Pa ramet ers 13 0—U se G.711µ- law for fax pa ss-throu gh co dec. 1—U se G.71 1A-law for fax pass- through codec. Default: 0 14-15 0—U se fax pass-through. 1—Use cod ec[...]

5-26 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Operation al Parameters SigTimer Description This para meter con trols various timeout s. Ta b l e 5 - 3 contains b it def initions o f this param eter . Valu e Type Bitmap Default 0x000000[...]

5-27 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Operati onal Pa ramet ers OpFlags Description Enabl es/d isables v arious operati onal features . See Ta b l e 5 - 4 for bi t d ef init ion s of this pa rame ter . Valu e Type Bitmap Default[...]

5-28 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Operation al Parameters 10 Rese rv ed. 11 If Bi t 11=0 , the Cisco A T A r equests the device ho stname fr om the DHCP server . If Bit 11=1 , the Cisco A T A uses t he device hostname t hat[...]

5-29 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Tone Config urati on Param eters TOS Description This par ameter allo ws you to conf igu re T ype of Service (T oS) bits b y specify ing the prec edence and delay of audio and signa ling IP [...]

5-30 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Tone Confi guration P arameters • Rec ommend ed V alues , page 5-36 • Specific T one Paramet er Inform ation, pa ge 5-36 This section also co v ers the follo wing parameter , which is f[...]

5-31 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Tone Config urati on Param eters Note All tones ar e persistent (until the Cisco A T A changes sta te) e xcept for the cal l-waitin g tone and the confirm tone. The call-wait ing tone, howev[...]

5-32 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Tone Confi guration P arameters Specify each v alu e as a number o f sample s with a sampli ng rate of 8 kHz. The ran ge of eac h v alu e is 0 to 0xff f f. For example, for a lengt h of 0.3[...]

5-33 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Tone Config urati on Param eters • NumOfF r eqs is the number of fr equenc ies in the tone (1, 2, or 3). The fr equenc ies can play simultane ously or sequen tially , depen ding on t he Se[...]

5-34 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Tone Confi guration P arameters • T ota lT one T im e is the to tal length of time th at the tone plays. If this v al ue is 0, the tone will play until an other cal l e ven t stops the to[...]

5-35 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Tone Config urati on Param eters Reor derTon e Param eter Exam ple 2 Assume that you want a reord er tone in whic h: • The onl y fre quency is 400 Hz . • The fr equency pl ays six t imes[...]

5-36 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Tone Confi guration P arameters Reco mmended Values The following settin gs ar e reco mmen ded f or the US: • Di al T o ne = "2,31538,3083 1,1380,174 0,1,0,0, 1000" (a pp ro xi [...]

5-37 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Tone Config urati on Param eters • Tfreq1— 31538 • Tfreq2— 30831 • T amp1—1 380 • T amp2—1 740 • Steady—1 • OnT i me—0 • Of fT ime—0 • T otalT oneT ime—1000 V[...]

5-38 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Tone Confi guration P arameters • T amp2—1 513 • Steady—0 • OnTi me—2 000 • OffT ime—2000 • T otalT oneT ime—0 Voice Configuration Menu Access Code 922 RingbackTone Desc[...]

5-39 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Tone Config urati on Param eters • OffT ime—2400 • T otalT oneT ime—4800 Voice Configuration Menu Access Code 924 AlertTone Description The Cis co A T A plays the aler t tone as a co[...]

5-40 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Dia gnost ic P aram eter s RingCaden ce Description Use this parameter to specify th e internal a nd ex ternal ri nger caden ce pattern, expressed as a tr iplet of inte gers “a,b , and c?[...]

5-41 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults Diagnost ic Pa rameters Exam ple If the progra m prserv .exe is run ning on a host with IP addres s 192 .168. 2.170 and lis teni ng po rt 9001 , set NPrintf t o 192.168.2 .170.9001 . This ca[...]

5-42 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s Dia gnost ic P aram eter s Valu e Type Extend ed I P address Default 0.0.0.0 .514 Voice Configuration Menu Access Code 7975640 Related Parameter SyslogCtrl , page 5-42 SyslogCtrl Descriptio[...]

5-43 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 5 Parameters an d Defaults CFGID—Version Parameter for Cisco ATA Configuration File CFGID—Version Parameter for Cisco ATA Configuration File Description CFGID is a 32-bit uns igned-v alue parame ter whose purpo se[...]

5-44 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 5 Parameters a nd Default s CFGID—Version Parameter f or Cisco ATA Co nfiguration File[...]

C HAPTER 6-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 6 Configuring and Debug ging Fax Services The Cisco A T A provide s two modes of fax services t hat are capa ble of intern etworking w ith Cisco IOS ga te wa ys o v er I P netw or ks. T hese mode s are cal led fax p a[...]

6-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note Th e Cisco A T A can a lso accept stand ard-based protoc ol-level codec switch requests, but cannot send such re quests. Theref ore, to in[...]

6-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de ConnectMode Description The Connec tMode param eter is a 3 2-bit v alue. The parameter se ttings app ly to both lines of the Cisco A T A. C onfig[...]

6-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note For detaile d informat ion on settin g up yo ur IOS gate ways and on fea ture a v ailability , refer to the documen t Cisco F ax Se rvices[...]

6-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de Dial-Peer Lev el Commands Y ou can en able fax pass-t hr ough mode for com municat ion betwe en a C isco IOS gateway and the specif ied Cisco A T[...]

6-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Usin g FAX Mode Using FAX Mode Use fax mode when the gate w ays in the network do not support fax pass-through mode or dial -pe er configurat ion. Y ou can set one or both l[...]

6-7 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Configuring the Cisco IOS Gateway for Fax Mode On the C isco gateway , disable bo th fax re lay and fax pass-thr ough at t he dia[...]

6-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Using prserv for Diagnos ing Fax Problems This section con tains the follo wing topics: • prse rv Ov ervi e w , page 6-9 ?[...]

6-9 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services prserv Overview prserv is a tool th at runs on a Mi crosoft W indo ws-b ased PC and serv es as a log serve r that captu res debug[...]

6-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Debugging FAX Pass-th rough Mode When the Ci sco A T A is conf igured to use fax pass-t hr ough mode , the fax call sessi on[...]

6-11 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services An exam ple deb ug log for a terminating gate w ay scenario is sho w belo w: [0]Tx MPT PT=100 NSE pkt c0000000 [0]codec: 4 =>[...]

6-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices If the nu meric co des for the G.711 c odecs do n ot appea r in the l og, you ne ed to che ck your AudioMode parameter setti[...]

6-13 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Step 3 At the DOS p rompt o f thi s direc tory , ente r the following c ommand: :> rtpcatch < cap_file > [ <prefix&g[...]

6-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices ------------ Summary -------------- Input file: faxpassthru.cap <00.723>: (G723) 2.213:10000 => 2.116:10002 total 3[...]

6-15 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services This indicat es tha t rtpca tch detecte d two los t R TP packets in th e audio pa th <02>. The missing packets began with [...]

6-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices – e vent 201, T38 Fax Mode A CK – e vent 202, T38 Fax Mode N A CK – e vent 203, Mo dem Rela y Mode, CM T on e Detect e[...]

6-17 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Example 6 -3 Fax P ass-throug h Mode ---------- FAX Summary 1 ---------- [ 37]<3.200=>2.53> Codec G723 [ 41]<2.53=&g[...]

6-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Example 6 -6 Cisco A T A Configur ation F a ilur e ---------- FAX Summary 1 ---------- [ 37]<2.53=>3.200> Codec G72[...]

6-19 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Possible Causes for Failure • Fax/modem pass-th rough opti on is not enabled on t he gatew ay . • Fax/modem pa ss-throu gh N[...]

6-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices rtpcatch Limitations • rtpca tch perfor ms optim ally wh en anal yzing ca pture files con taining on ly one V oIP session.[...]

C HAPTER 7-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 7 Upgrading the Cisc o ATA Signaling Image This se ction de scribes two methods for up grading t he Ci sco A T A software for t he MGCP protoc ol: • Upgrad ing the Signa ling Image from a TFTP Server, page 7-1 —Th[...]

7-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Man ually • tftp_se rver_ ip is the TFTP serve r that contains the latest signaling image f ile. • image_i d is a uni que 32-bit in tege[...]

7-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Upgradi ng the Sign alin g Image Manu ally Preliminary Steps Before you run the executa ble file, be sure to comp lete the following pro cedure : Proc edure Step 1 If you ar e[...]

7-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Man ually Definitions • -any —Allow upgrad e regardless of soft ware and build versions (re commend ed). • -h[host _ip]— Set the upg[...]

7-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Conf irmi ng a Su cces sful Sig nalin g Im age Upg rade Confirming a Succe ssful Signaling Image Upgrad e Y ou can veri fy that you have successfu lly upgra ded th e Cisco A T[...]

7-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Confirming a Su ccessful Sig naling Image U pgrade[...]

C HAPTER 8-1 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 8 Troubleshooting This se ction de scribes troubleshoot ing pr ocedures f or the Cisco A T A: • General Troubleshoot ing T ips, page 8-1 • Symptoms and Actions , page 8-2 • Install ation and Upgr ade Issues, pag[...]

8-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Symptoms and Actions • A busy tone indicate s that th e part y you c alled is not available. Try your call again lat er . A fast-busy tone in dicates that yo u dial ed an in valid number . • Afte[...]

8-3 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing Installat ion and Up grade Is sues Sympto m The Cisco A T A contacts the TFTP serv er more often than specif ied in the CfgInter v al parame ter . Possible Cause The T oConfig pa rameter is not set t[...]

8-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Debuggi ng Sympto m The red LE D is flashi ng slowly on the funct ion button. Possible Cause The Cisco A T A is trying to obtain the DHCP ad dress or the softw are image is bei ng upgrade d. Possible[...]

8-5 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing Debuggi ng where IP a ddr ess is the IP address of your PC, and port is 9001 . If anot her proces s on your PC a lread y uses port 90 01, you may use some other va lue (legal values are from 1024 to [...]

8-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Using System D iagnost ics Using System Diagn ostics The Cisco A T A uses functionality of the syslog protocol for system diagnostic s. For detai led information on syslog, see RFC-3164 . Note Be cau[...]

8-7 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing Usin g System Diagn ostic s The fo llowing example s show some of the different type s of me ssages tha t syslo g repor ts. Exam ple—AR P Mess age <62>00:00:51 192.168.3.169 [00]:ARP Update: [...]

8-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Using System D iagnost ics Exam ple—C isco ATA Config urati on Upda te Mess age <30>00:00:01 192.168.3.237 [03]:ATA Config Update OK This message include s the follow ing information: • Pri[...]

8-9 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing Local To ne Playout Report ing Examp le—Fax Ev ent Mess ages <150>00:00:11 192.168.3.169 [10]:[1]MPT mode 0 <150>01:07:27 192.168.3.169 [10]:[1:0]Rx FAX <150>01:07:27 192.168.3.16[...]

8-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Obtainin g Network S tatus Prior to Getti ng IP Connect ivity Obtaining Network Status Prior to Getting IP Connectivity Using v oice configuratio n menu code 31 23#, you can ob tain basi c network s[...]

8-11 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing Obtaining Network Status After Getting IP Connectivity Exam ple If the hexadec imal value provided by the voice con f igura tion menu is 0x1d, the netwo rk status of th e Cisco A T A is shown in Ta [...]

8-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Obt ainin g Netw ork S tatus Afte r Gett ing IP C onne ctivi ty • NTP: D1,D 2,D3 • tftp: 0xX where: – D0 is the VLAN ID. It should b e non-zero if the Cisco A T A has entere d a VLAN. – S is[...]

8-13 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing DHCP Stat us HTML Page DHCP Status HTML Page Y ou can use the follo wing command to chec k the statu s DHCP-rela ted info rmation: http:// ipaddr ess /stats/ where ipaddress is the IP address of the[...]

8-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Frequent ly Asked Q uestions Resetting Cisco ATA counters T o re set th e Cis co A T A counte rs , do the f ollowi ng: • Click the [Refresh ] link to refresh the current co unter va lues. • Clic[...]

8-15 Cisco ATA 186 an d Cisco ATA 188 Analog Te lephone Ada ptor Administrato r’s Guide fo r MGCP (version 3.0) OL-4803-01 Chapter 8 Troubleshoot ing Conta cting TA C If you answ ered no t o any of the pre ceding que stions, you may have a loop impeda nce gre ater than 40 0 ohm. I n this case, perform the follo wi ng proced ure. Proc edure Step 1[...]

8-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Chapter 8 Trouble shoot ing Cont act ing TA C[...]

A- 1 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’s Gui de for MGCP (versi on 3.0) OL-4803-01 APPEND IX A Voice Configuration Menu Codes This sec tion con tains a quick -refer ence li st of th e voice co nfiguration me nu opti ons for t he Cisco A T A. For informat ion on using the v oice configuration men u codes , [...]

A- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendi x A Voice Confi gurat ion Menu C odes Ta b l e A - 2 lists con figu ration code s. For a dditional information a bout these p arameters, see “ Chapter 5, “P aramete rs and Def aults.” T able A -2 Cisco A T A V oi[...]

A-3 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix A Voice Configurati on Menu Code s Ta b l e A - 3 lists codes used i n the software upg rade process . For informat ion about th ese codes, see Chapter 7, “Upgr ading the Cisc o A T A Sign aling I mage.” Static [...]

A- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendi x A Voice Confi gurat ion Menu C odes[...]

B-1 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’s Gui de for MGCP (versi on 3.0) OL-4803-01 APPEND IX B Cisco ATA Specifications This section desc ribes Cisco A T A specifications: • Physical Sp ecifications, page B -1 • Elec trical Specif ica tions for Cisco A T A, pa ge B-2 • En vi ronmental Spec ific ations[...]

B-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendi x B Cisco ATA Speci fica tions Electrical Specification s for Cisco ATA Electrical Specificat ions for Cis co ATA Environme ntal Specificati ons Physical Interfaces T able B-2 Electr ical Specifications Description Spec[...]

B-3 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix B Cisco ATA Specificat ions Ringin g Char acteri stics Ringing Chara cteristics Software Specifications T a bl e B-5 R ingi ng C haracte r isti cs Description Specification T ip/rin g interfa ces for each RJ-11 FXS [...]

B-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendi x B Cisco ATA Speci fica tions Softw ar e Spe cific ation s Line -echo ca ncella tion • Echo cance ller for each port • 8 ms echo lengt h • Nonline ar echo suppre ssion (ERL > 28 dB for frequency = 300 to 2400 [...]

B-5 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix B Cisco ATA Specificat ions Sof tware Sp ecifi cations V oic e feature s • V oice acti vity detect ion (V AD) • Comfort noise ge nerati on (CNG) • Dynamic jitte r buf fer (adapti v e) V oice-ov er-IP (V oIP) p[...]

B-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendi x B Cisco ATA Speci fica tions Softw ar e Spe cific ation s[...]

C-1 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’s Gui de for MGCP (versi on 3.0) OL-4803-01 APPEND IX C MGCP Call Flows This section sh o ws and describes a ca ll flow for a succe ssful call using the Cisco A T A and MGCP . Note Th e term Cisco AT A refers to both the Cisco A T A 186 and the Cisco A T A 188, unless [...]

C-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendix C MGCP Call F lows Figur e C-1 Cisco A T A -t o-Cis co A T A Through V ocalData Ca ll A gent ATA 1 VocalData Call Agent ATA 2 1. Cisco ATA 1 goes off-hook 2. OK 3. An inactive connection is created on Cisco ATA 1 4. OK[...]

C-3 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Appendix C MGCP Call Flows T able C-1 Action Log Step A ction Log 1. Cisco A T A 1 g oes off-hook— Cisco A T A 1 to Call A gent NTFY 16 aaln/1@[192.168.2.45] MGCP 1.0 N: 192.168.3.76:2427 X: 10 O: L/hd K: 15 2. OK—Call Ag[...]

C-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendix C MGCP Call F lows 15. Cis co A T A 1 dials “6”—Cisco A T A 1 to Cal l Agent NTFY 20 aaln/1@[192.168.2.45] MGCP 1.0 N: 192.168.3.76:2427 X: 29629 O: D/6 K: 19 16. OK—Call Agent to Cisco A T A 1 200 20 OK 17. Ci[...]

C-5 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Appendix C MGCP Call Flows 27. Routing Upda te Protoco l (R TP) Media stre am is now enabled on Cisco A T A 2—Call Agent to Cisco A T A 2 mdcx 57724 aaln/1@[192.168.3.33] MGCP 1.0 C: 26962 I: 0 X: 29642 R: L/hu(N),L/hf(N),D[...]

C-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appendix C MGCP Call F lows 38. OK—Cisco A T A 1 to Ca ll Agent 200 57736 OK 39. A T A 2 Connecti on mode changes to rece i ve-only—Cal l Agent to Cis co A T A 2 mdcx 57737 aaln/1@[192.168.3.33] MGCP 1.0 K: 57722-57724 C: 2[...]

D- 1 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’s Gui de for MGCP (versi on 3.0) OL-4803-01 APPEND IX D Recommended Cisco ATA Tone Para meter Values by Country This section pro vides tables of recommen ded tone parameters for the follo wi ngs countries, listed alphabe tically: Note Th e extended to ne format use d [...]

D- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country • India • Indonesia • Irela nd • Israel • Italy • Japan • Ko re a • Luxembourg • Malaysia • Mex ico • Nether lands • Ne w Zeala[...]

D-3 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country T able D-1 Ar g entina Parameter Recommended V alues DialT one 1,30958 ,0,3125,0, 1,0,0,0 BusyT one 1,30958,0, 1757,0,0,2 400,1600,0 ReorderT one 1,30958,0, [...]

D- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country Ta b l e D - 5 B r a z i l Parameter Recommended V alue s DialT one 1,30958 ,0,3125,0, 1,0,0,0 BusyT one 1,30958,0, 1757,0,0,2 000,2000,0 ReorderT one [...]

D-5 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country T able D-9 Czec h Republic Parametter Recommended V alue s DialT one 1,30958 ,0,3125,0, 1,0,0,0 BusyT one 1,30958,0, 1757,0,0,2 664,2664,0 ReorderT one 1,309[...]

D- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country T able D-13 Fr ance Parameter Recommended V alue s DialT one 1,30830 ,0,3231,0, 1,0,0,0 BusyT one 1,30830,0, 1817,0,0,4 000,4000,0 ReorderT one 1,30830[...]

D-7 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country T able D-17 Hungary Parameter Recommended V alue s DialT one 1,30958 ,0,3197,0, 1,0,0,0 BusyT one 1,30958,0, 1737,0,0,2 400,2400,0 ReorderT one 1,30958,0, 17[...]

D- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country Ta b l e D - 2 1 I r e l a n d Parameter Recommended V alue s DialT one 1,30958 ,0,7582,0, 1,0,0,0 BusyT one 1,30958,0, 6758,0,0,4 000,4000,0 ReorderT [...]

D-9 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country Ta b l e D - 2 5 K o r e a Parameter Recommended V alue s DialT one 2,31537 ,30830,18 33,228 7,1,0,0, 0 BusyT one 2,30466,28958 ,1398, 1777,0,400 0,4000 ,0 R[...]

D-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country T able D-29 Nether land s Parameter Recommended V alue s DialT one 1,30958 ,0,3125,0, 1,0,0,0 BusyT one 1,30958,0, 1757,0,0,4 000,4000,0 ReorderT one 1[...]

D-11 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country Ta b l e D - 3 3 P a n a m a Parameter Recomme nded V alues DialT one 1,30958 ,0,3125,0, 1,0,0,0 BusyT one 1,30958,0,175 7,0,0,2 560,37200 ,0 ReorderT one 1[...]

D-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country T a bl e D- 37 Portugal Parameter Recommended V alue s DialT one 1,30958 ,0,3889,0, 1,0,0,0 BusyT one 1,30958,0, 1757,0,0,4 000,4000,0 ReorderT one 1,3[...]

D-13 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country Ta b l e D - 4 1 S l o v a k i a Parameter Recommended V alues DialT one 1,30 958,0, 3889,0,1,0 ,0,0 BusyT one 1,30958,0, 1757,0, 0,2640 ,2640,0 ReorderT on[...]

D-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country T able D-45 Sw eden Parameter Recommended V alue s DialT one 1,30 958,0,388 9,0,1,0 ,0,0 BusyT one 1,30958,0, 1757,0,0,2 000,2000,0 ReorderT one 1,3095[...]

D-15 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 Append ix D Recommended Cisc o ATA Tone Parameter Values by Country T able D-49 T ur k ey Parameter Recommended V alue s DialT one 1,30742 ,0,3301,0, 1,0,0,0 BusyT one 1,30742,0, 1856,0,0,4 000,4000,0 ReorderT one 100,1,3074[...]

D-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 Appe ndix D Reco mmen ded C isco A TA To ne Par amete r Value s by Country[...]

GL-1 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 GLOSSAR Y Numerics 10Ba seT 10-M bps baseb and Ethe rnet s pecification using t wo pairs o f twisted -pair cabling (Categor ies 3, 4, or 5): one pair for transmitt ing data and th e other fo r receiving data. 10Ba seT , whi [...]

Glos sary GL-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 compr ession Th e ru nning of a data se t throug h an a lgorithm that r educes t he space required to store or th e bandwi dth requir ed to transmit the data set. Compare w ith comp anding and expan sion. CoS Class o[...]

Glossary GL-3 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 FXO Foreign Ex change Of fice. An FXO int erface conne cts to the pub lic switche d telephon e network (PSTN) centr al of f ice and is the interf ace of fered on a stan dard telephone. Cisco FXO interfac e is an RJ-[...]

Glos sary GL-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 IP Intern et Protocol . Network layer pr otocol in the T CP/IP stack o ffering a con nectionle ss intern etwork service. IP p rovides fe atures for addressi ng, ty pe-of-serv ice sp ecification , frag mentati on and [...]

Glossary GL-5 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 P POTS Plain old telepho ne service . Basic telephon e service sup plying stan dard single-li ne telephon es, telephone lines, and a ccess to the PST N. Proxy S erver An inter media ry program that act s as both a s[...]

Glos sary GL-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01 SIP Session Initia tion Protocol. Protocol dev eloped b y the IETF MMUSIC W o rking Group as an alterna tiv e to H.32 3. SIP fea tures ar e compli ant with IETF RFC 254 3, publis hed in Ma rch 1999 . SIP equips pla t[...]

Glossary GL-7 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 voice pa cket gateway Gateway platfor ms that enable Intern et tele phony service provider s to offer res idential and b usiness-c lass services for Internet telephony . VoIP V oice o ver IP . Th e capabilit y to ca[...]

Glos sary GL-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide for MGCP (version 3. 0) OL-4803-01[...]

IN-1 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 INDEX Numerics 10/100BA SE-T dat a port 1-4 10/100BAS E-T hub 1-4 10BASE -T uplink Ethe rnet por t 1-4 802.1Q VLAN ID 3-4 802.1 Q VLAN ID config uration 5-11 A alph anumer ic va lues 3-22 ata.txt file 3-10 atadef ault.cfg co[...]

Index IN-2 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide for MGCP (version 3.0) OL-4803-01 comm on paramet ers configuratio n 3-9 confere nce c onnecti on mode settin g 5-25 conf erences 1-2 configuratio n 5-27 802.1 Q VLAN ID 5-11 alternate Call Ag ent 5-13 atadef ault.cf g file 3-12 audio ope rating mo de 5-[...]

Inde x IN-3 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 RTP media p ort 5-17 RTP packet size 5-21 static ne twork router probing 5-27 text f ile template 5-2 TFTP filename setting 5-27 tones 5-29 VLAN Co S bit va lue (802. 1P priori ty) for T CP pack ets 5-11 VLAN ID speci[...]

Index IN-4 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide for MGCP (version 3.0) OL-4803-01 debugging 6-7 services 1-7, 6-1 fax mode 6-1, 6-6 configuratio n 6-6, 6-7 definition 1-7 descript ion 6-1 fax pass-thr ough 5-25 redundancy setting 5-24 fax pass-thr ough mode 6-1 configuratio n 6-2 definition 1-7 descri[...]

Inde x IN-5 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 related p arameters 4-5 signals and events 4-7 version 1-5 versions 1-5 mgcp_exa mple.txt file 3-10 mgcp _exampl e.txt sam ple confi guration fi le 3-9 mgcp _exampl e.txt text file 5-2 MGC PPort 5-16 MGC PVer 5-18 MGC[...]

Index IN-6 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide for MGCP (version 3.0) OL-4803-01 retransmission int erval configuration 5-17 RetxIntv 5-17 RetxLim 5-17 reviewin g default rou ter for Cisc o ATA to use 3-22 reviewin g subnet mask o f Cisco A TA 3-22 review IP ad dress of Cisco ATA 3-21 Ringbac k Tone [...]

Inde x IN-7 Cisco ATA 186 an d Cisco ATA 188 Anal og Telephon e Adaptor Administ rator’ s Guide for MGCP (v ersion 3.0) OL-4803-01 tone reorder 5-32 tone p aramete rs 5-30, 5-31 ton e para meter synt ax basic for mat 5-30 exten ded form ats 5-31 tones 5-29 syntax 5-30 TOS bits 5-29 Trace Flags parame ter 5-41 troublesh ooting general tips 8-1 ins[...]

Index IN-8 Cisco ATA 186 an d Cisco ATA 188 Analo g Telephone Adap tor Administr ator’s Guide for MGCP (version 3.0) OL-4803-01[...]