Deutsch dropdown-ico

Cisco Systems MDS 9000 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Cisco Systems MDS 9000 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Cisco Systems MDS 9000, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Cisco Systems MDS 9000 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Cisco Systems MDS 9000. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Cisco Systems MDS 9000 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Cisco Systems MDS 9000
- Den Namen des Produzenten und das Produktionsjahr des Geräts Cisco Systems MDS 9000
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Cisco Systems MDS 9000
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Cisco Systems MDS 9000 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Cisco Systems MDS 9000 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Cisco Systems finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Cisco Systems MDS 9000 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Cisco Systems MDS 9000, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Cisco Systems MDS 9000 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    CH A P T E R 20-1 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 20 Show Commands The commands in this chapter apply to the Cisco MDS 9000 F amily of multil ayer directors and f abric switches. All commands are sho wn here in al phabe tical order regardless of command mode. See the “Command Modes” section to [...]

  • Seite 2

    20-2 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands • show fcroute, page 20 -44 • show fcs, page 20-47 • sho w fcsp, page 20-51 • sho w fctimer , page 20-53 • sho w fdmi, page 20-54 • sho w fdmi, page 20-54 • sho w ficon , page 20-57 • show f ile, page 20-63 • sho w flogi[...]

  • Seite 3

    20-3 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands • sho w port-security , page 20-126 • show processes, page 20-129 • sho w qos, page 20-132 • sho w radius-server , page 20-134 • show rlir , page 20-135 • sho w role, page 20-139 • sho w rscn, page 20-140 • sho w running-[...]

  • Seite 4

    20-4 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show aaa authentication show aaa authentication T o display configur ed authenticatio n information, use th e show aa a authentication command . show aaa authentication Syntax Descripti on This command has no ar guments or k eywo rds. Def[...]

  • Seite 5

    20-5 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show aaa groups show aaa groups T o display configur ed server g roups, use the sho w aaa gr oups command. show aaa gr oups Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command[...]

  • Seite 6

    20-6 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show arp show arp T o display Address Resolution Protocol (ARP) entries, use the show arp command. show arp Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command History This com[...]

  • Seite 7

    20-7 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show banner motd show banner motd T o display a configured message of t he day (MO TD) banner , use the show banner moted command. show banner motd Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command [...]

  • Seite 8

    20-8 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show boot show boot T o display the boot v ariables or modules, use the sho w boot command. show boot [ module [ slot | va riable-name ] | sup-1 | sup-2 | variab les ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command Hi[...]

  • Seite 9

    20-9 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show boot auto-cop y show boot auto-copy T o dis play state of the auto-copy feature, use the show boot auto-copy command. show boot auto-copy [ list ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This comm[...]

  • Seite 10

    20-10 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show callhome show callhome T o display related Call Home information conf igured o n a switch, use the show callhome command. show ca llhome [ destination-pr of ile { pr ofil e | full-txt-destinat ion | short-txt-destination | XML-desti[...]

  • Seite 11

    20-11 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show callhome email addresses configured: person1@epage.company.com full-txt destination profile information maximum message size:250000 email addresses configured: person2@company2.com The follo wing e xample displays the fu ll-tex t p[...]

  • Seite 12

    20-12 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp show cdp T o display CDP parameters conf igured globall y or for a specif ic interf ace, use the sho w cdp command. show cdp { all | ent ry [ all | name cdp-name ] | global | interface [ gigbitet hern et slot / po rt | mgmt 0 ] [...]

  • Seite 13

    20-13 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp CDP enabled on interface Sending CDP packets every 100 seconds Holdtime is 200 seconds The follo wing e xample displays all CDP neighbor entries. switch# show cdp entry all ---------------------------------------- Device ID:069[...]

  • Seite 14

    20-14 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp The follo wing e xample displ a ys CDP Neighbors (brief). switch# show cdp neighbors Capability Codes: R - Router, T - Trans-Bridge, B - Source-Route-Bridge S - Switch, H - Host, I - IGMP, r - Repeater Device ID Local Intrfce Hl[...]

  • Seite 15

    20-15 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cdp The follo wing example displays CDP traf f ic statistics for the management interface. switch# show cdp traffic interface mgmt 0 ---------------------------------------- Traffic statistics for mgmt0 Input Statistics: Total Pack[...]

  • Seite 16

    20-16 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show cimserver show cimserver T o display the Common Information Models (CIM) conf igurations and settings, use t he show cimserv er command. show cimserver [ certif icateName | Ht tpsStatus | HttpStatus | status ] Syntax Descripti on De[...]

  • Seite 17

    20-17 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show clock show clock T o display the system date and time and verify t he time zone conf iguration, use the sho w clock command. show clock Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes [...]

  • Seite 18

    20-18 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show core s show cores T o dis play all the cores presently av aila ble for upload from activ e sup, use the show cor es command. show cores Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes E[...]

  • Seite 19

    20-19 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show debug logfile show debug logfile T o display the debug messages that are sa ved in the deb ug log f ile, use the show debu g logf ile co mmand. show deb ug logf ile f ilename Syntax Descripti on Defaults None. Command Modes EXEC mo[...]

  • Seite 20

    20-20 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show environ ment show environment T o display all en vironment -related switch information (st atus of cha ssis clock, chassis fan modules, po wer supply modules, p o wer supply redundanc y mo de and po wer usage summary , module temper[...]

  • Seite 21

    20-21 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show environment Temperature: --------------------------------------------------------------- Module Sensor MajorThresh MinorThres CurTemp Status (Celsius) (Celsius) (Celsius) ------------------------------------------------------------[...]

  • Seite 22

    20-22 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding show fabric-binding T o display configur ed fab ric binding informatio n, use the show fabric-binding command in EXEC mode. show fabric-binding { database [ active ] [ vsan vsan-id ] | efmd statistics [ vsan vsan-id ][...]

  • Seite 23

    20-23 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding The follo wing e xample display s acti ve fabric bindi ng information. switch# show fabric-binding database active -------------------------------------------------- Vsan Logging-in Switch WWN Domain-id -------------[...]

  • Seite 24

    20-24 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding Statistics For VSAN: 346 ------------------------ Number of sWWN permit: 0 Number of sWWN deny : 0 Total Logins permitted : 0 Total Logins denied : 0 Statistics For VSAN: 347 ------------------------ Number of sWWN pe[...]

  • Seite 25

    20-25 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fabric-binding Merge Accepts -> Transmitted : 0 , Received : 0 Merge Rejects -> Transmitted : 0 , Received : 0 Merge Busy -> Transmitted : 0 , Received : 0 Merge Errors -> Transmitted : 0 , Received : 0 EFMD Protocol St[...]

  • Seite 26

    20-26 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc-tun nel show fc-tunnel T o display configur ed Fibre Channel tu nnel information, use the sho w fc-tunnel command. show fc-tunnel [ explicit- path [ name ] | tunnel-id-map ] Syntax Descripti on Defaults None. Command Modes EXEC m[...]

  • Seite 27

    20-27 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc2 show fc2 T o display FC2 information, use the show fc2 command. show fc2 {bind | classf | exchange | exchr esp | flogi | nport | plogi | plogi_pwwn | port [ brief ] | socket | sockexch | socknotify | socknport | vsan} Syntax De[...]

  • Seite 28

    20-28 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc2 Examples The following e xample displays FC2 activ e socket information. switch# show fc2 socket SOCKET REFCNT PROTOCOL PID RCVBUF RMEM_USED QLEN NOTSK b2a64b20 2 0 1421 65535 0 0 0 b2a647e0 3 0 1418 262142 0 0 0 b2a644a0 3 0 14[...]

  • Seite 29

    20-29 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fc2 The following example displays FC2 phys ical port informati on. switch# show fc2 port IX ST MODE EMUL TXPKTS TXDROP TXERR RXPKTS RXDROP R_A_TOV E_D_TOV F-SO RC RS CS EE 2-SO RS 3-SO RS 0 D 1 0 0 0 0 0 0 10000 2000 8000 0000 211[...]

  • Seite 30

    20-30 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcalias show fcalias T o display the FC alias (fcalias0 conf iguration, u se the show fcalias command. show fcalias [ name string ] [ vsan vsan-id ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This co[...]

  • Seite 31

    20-31 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcanalyzer show fcanalyzer T o display the list of hosts conf ig ured for a remote capture, use the show fcanalyzer command. show fcanalyzer Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command M[...]

  • Seite 32

    20-32 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcc show fcc T o view FCC settings, use t he show fcc commands. show fcc [ statisti cs interf ace { fc slot / port | fcip fcip-id | iscsi slot / port }] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History Thi[...]

  • Seite 33

    20-33 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcdomain show fcdomain T o display the Fibre Channel domain (f cdomain) informati on, use the show fcdomain command. show fcdomain [ addr ess-allocation [ cache ] | allowed | domain-list | fcid persistent [ unused ] | statistics [ [...]

  • Seite 34

    20-34 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcdomain Local switch configuration information: State: Enabled Auto-reconfiguration: Disabled Contiguous-allocation: Disabled Configured fabric name: 41:6e:64:69:61:6d:6f:21 Configured priority: 128 Configured domain ID: 0x64(100) [...]

  • Seite 35

    20-35 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcdroplatency show fcdroplatency T o display the conf igured Fibre Channel l atency p arameters, use the sho w fcdroplatency command. show fcdr oplatency [ network | switch ] Syntax Descripti on Defaults None. Command Modes EXEC mo[...]

  • Seite 36

    20-36 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcflow stats show fcflow stats T o display the conf igured Fibre Channe l flo w (fcflo w) information, use the show f cflow sta ts command. show fcflow stats [ aggr egated | usage ] module slot [ index flow-ind ex ] Syntax Descripti[...]

  • Seite 37

    20-37 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcfwd show fcfwd T o display the conf igured fcfwd tables and statistics, use the show fcfwd command. show fcfwd {idxmap [ interf ace-toport | port-to-interface | statistics ] | pcmap [ interface ] | sf ib [ multicast | statistics [...]

  • Seite 38

    20-38 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcip profile show fcip profile T o display the status of an inte rface at an y time, usedisplays the show fcip pr of ile command. show fcip profile [ pr ofil e-id | all ] Syntax Descripti on Defaults None. Command Modes EXEC Command[...]

  • Seite 39

    20-39 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns database show fcns database T o display the results of the disco v ery , or to displa y the name server d atabase for a specif ied VSAN or for all VSANs, use the sho w fcns database command. show fcns database {detail [ vsan v[...]

  • Seite 40

    20-40 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns da tabase FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE -------------------------------------------------------------------------- 0xef0001 N 22:02:00:05:30:00:35:e1 (Cisco) scsi-fcp:init isc..w Total number of entries = 1 VSAN 3: -[...]

  • Seite 41

    20-41 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns database fabric-port-wwn :22:01:00:05:30:00:35:de hard-addr :0x000000 Total number of entries = 1 ... The follo wing e xample displays the management VSAN (VSAN 2). switch# show fcns database vsan 2 VSAN 2: -------------------[...]

  • Seite 42

    20-42 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns da tabase Related Commands Com ma nd De scr ip tio n asm mgmt-vsan Displays the CPP interface confi guration for a specif ied interface.[...]

  • Seite 43

    20-43 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcns stat istics show fcns statistics T o display the statistical information for a specified VSAN or for all VSANs, use the show fcns statistics command. show fcns statistics [ detail ] [ vsan vsan-id ] Syntax Descripti on Default[...]

  • Seite 44

    20-44 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcro ute show fcroute Use the show fcr oute command to vie w specif ic information about e xisting Fibre Channel and FSPF configurations. show fcroute { distance | label [ label ] vsan vsan-id | multicast [ fc-id vsan vsan-id | vsan[...]

  • Seite 45

    20-45 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcroute The follo wing e xample display s multicast routing i nformation. switch# show fcroute multicast VSAN FC ID # Interfaces ---- -------- ------------ 1 0xffffff 0 2 0xffffff 1 3 0xffffff 1 4 0xffffff 0 5 0xffffff 0 6 0xffffff[...]

  • Seite 46

    20-46 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcro ute The follo wing e xample display s unicast r outing information for a specif i ed FCID. switch# show fcroute unicast 0x040101 0xffffff vsan 4 D:direct R:remote P:permanent V:volatile A:active N:non-active # Next Protocol VSA[...]

  • Seite 47

    20-47 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs show fcs Use the show fcs co mmands to display the status of the f abric conf iguration. show fcs {database [vsan vsan-id ] | ie [ nwwn wwn ] vsan vsan-id | pl atf orm [ name string ] vsan vsan-id | port [ pwwn wwn ] vsan vsan-[...]

  • Seite 48

    20-48 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs fc2/2 20:42:00:05:30:00:16:de Unknown None fc2/17 20:51:00:05:30:00:16:de TE 20:0a:00:05:30:00:20:de FCS Local Database in VSAN: 5 ------------------------------ Switch WWN : 20:05:00:05:30:00:12:5f Switch Domain Id : 0xef(239) [...]

  • Seite 49

    20-49 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs This command displays platf orm information within a specif ied VSAN. switch# show fcs platform vsan 1 Platform List for VSAN: 1 Platform-Names -------------- SamplePlatform [Total 1 Platforms in Fabric] This command displays F[...]

  • Seite 50

    20-50 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcs This command display s FCS statistics. switch# show fcs statistics FCS Statistics for VSAN: 1 --------------------------- FCS Rx Get Reqs :2 FCS Tx Get Reqs :7 FCS Rx Reg Reqs :0 FCS Tx Reg Reqs :0 FCS Rx Dereg Reqs :0 FCS Tx De[...]

  • Seite 51

    20-51 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcsp show fcsp T o display the status of the Fibre Channel Security Protocol (FC-SP) conf iguration, use the show fcsp commands. show fcsp [ asciiwwn ascii-wwn | dhchap [ database ] | interface fc slot / port [ statistics | wwn ] |[...]

  • Seite 52

    20-52 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fcsp The follo wing example displays the FC-SP WWN of th e device connected throu gh a specified interface. switch# show fcsp interface fc 2/1 wwn fc2/1: fcsp authentication mode:SEC_MODE_ON Status: Successfully authenticated Other [...]

  • Seite 53

    20-53 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fctim er show fctimer T o display the Fibre Channel timer s, use the show fctimer command . show fctimer [ d_s_tov | e_d_tov | f_s_tov | r_ a_tov | vsan vsan-id ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command [...]

  • Seite 54

    20-54 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fdmi show fdmi T o display the Fabric-De vice Mana gement Inte rface (FDMI) database information, use the show fdmi command. show fdmi database [ detail [ hba-i d [ hba-id vsan vs an-id | vsan vsan-id ] | vsan vsan -id ] Syntax Desc[...]

  • Seite 55

    20-55 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fdmi HBA-ID: 21:01:00:e0:8b:2a:f6:54 ------------------------------- Node Name :20:01:00:e0:8b:2a:f6:54 Manufacturer :QLogic Corporation Serial Num :74262 Model :QLA2342 Model Description:QLogic QLA2342 PCI Fibre Channel Adapter H[...]

  • Seite 56

    20-56 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fdmi CT Payload Len :2040 Port-id: 21:01:00:e0:8b:2a:f6:54[...]

  • Seite 57

    20-57 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon show ficon T o display configur ed FICON informatio n, use the show fi con command. show f icon [ control-de vice sb3 [ vsan vsan-id ] | fi rst-a vailable port-number | vsan vsan-id [ allegiance | dir ectory-history [ key-cou[...]

  • Seite 58

    20-58 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon Examples The followi ng exampl e displays conf igured FICON information switch# show ficon Ficon information for VSAN 20 Ficon is online VSAN is active Host port control is Enabled Host offline control is Enabled User alert mo[...]

  • Seite 59

    20-59 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon The follo wing e xample displays port address counter informatio n. switch# show ficon vsan 20 portaddress 8 counters Port Address 8(0x8) is up in vsan 20 Port number is 8(0x8), Interface is fc1/8 Version presented 1, Counter[...]

  • Seite 60

    20-60 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon switch# show ficon vsan 2 Ficon information for VSAN 2 Ficon is enabled VSAN is active Host control is Enabled Host offline control is Enabled Clock alert mode is Disabled User alert mode is Disabled SNMP control is Disabled A[...]

  • Seite 61

    20-61 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon The follo wing e xample displays two port a ddresses conf igured with dif ferent states switch# show ficon vsan 2 portaddress 2 Port Address 2(0x2) is not installed in vsan 2 Port number is 2(0x2), Interface is fc1/2 Port nam[...]

  • Seite 62

    20-62 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ficon 74570 57 74571 58 74572 59 74573 60 74574 61 74575 62 74576 63 74577 64 74578 74579 74580 1-3,5,10,12,14-16,34-40,43-45,47-54,56-57,59-64 74581 3,5 74582 64 74583 74584 1-3,10,12,14-16,34-40,43-45,47-54,56-57,59-64 74585 1 745[...]

  • Seite 63

    20-63 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show file show file T o dis play the contents of a specif ied file in the f ile system, use the show file command. show file fil e n a me [ cksum | md5sum ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History Thi[...]

  • Seite 64

    20-64 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show flogi databa se show flogi database T o list all the FLOGI sessions through all interf aces across all VSANs, use the sho w flogi database command. show flogi database [ fcid fcid-id | interface interface | vsan vsan-id ] Syntax Des[...]

  • Seite 65

    20-65 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show flogi database The follwing example displays the FLOGI interface. switch# show flogi database interface fc 1/11 INTERFACE VSAN FCID PORT NAME NODE NAME -------------------- ---- -------- ----------------------- --------------------[...]

  • Seite 66

    20-66 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fspf show fspf T o display global FSPF information, use the show fspf command . This information in cludes: • the domain number of the switch • the autonomous re gion for the switch • Min_LS_arri v al: the minimu m time that m[...]

  • Seite 67

    20-67 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fspf Neighbor Domain Id is 0x03(3), Neighbor Interface index is 0x0001060d Statistics counters : Number of packets received :LSU 184 LSA 184 Hello 5477 Error packets 0 Number of packets transmitted :LSU 184 LSA 184 Hello 5478 Retra[...]

  • Seite 68

    20-68 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show fspf ----------------------------------------------------------------------------- 0x65(101) 0x00001095 0x00001085 1 500 0x65(101) 0x00001096 0x00001086 1 500 0x65(101) 0x00001097 0x00001087 1 500 0x65(101) 0x00001094 0x00001084 1 5[...]

  • Seite 69

    20-69 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show hardware show hardware T o display switch hardware in ventory details, use the sho w hard war e command. show hardwar e [ ipc-channel status ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command[...]

  • Seite 70

    20-70 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show hard ware This supervisor carries Pentium processor with 963108 kB of memory Intel(R) Pentium(R) III CPU at 800MHz with 512 KB L2 Cache Rev:Family 6, Model 11 stepping 1 512K bytes of non-volatile memory. 503808 blocks of internal b[...]

  • Seite 71

    20-71 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show hosts show hosts T o d i s pl a y configured DNS host configuration details, us e th e show hosts command. show hosts Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command[...]

  • Seite 72

    20-72 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show incompatibility system show incompatibility system T o display the HA compatibility status b etween the tw o supervisor modules, use the show incompat ibility sys tem command. show incompatibil ity system [bootflash: | slot0: | vola[...]

  • Seite 73

    20-73 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all impact show install all impact T o display the software compatibility matr ix of a specif ic image, use the show install all impact command. show install all impact [ asm-sfn im age-fil ena me ] [ kickstart image-f ilen[...]

  • Seite 74

    20-74 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all impact [####################] 100% -- SUCCESS Extracting “loader” version from image bootflash:/vk73a. [####################] 100% -- SUCCESS Extracting “slc” version from image bootflash:/vs73a. [###############[...]

  • Seite 75

    20-75 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all stat us show install all status T o display the on-going install al l command status or the log of the last installed install a ll command from a Console, SSH, or T elnet session, use the show insta ll all status comman[...]

  • Seite 76

    20-76 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show install all status Verifying image bootflash:/b-1.3.0.104 -- SUCCESS Verifying image bootflash:/i-1.3.0.104 -- SUCCESS Extracting “system” version from image bootflash:/i-1.3.0.104. -- SUCCESS Extracting “kickstart” version [...]

  • Seite 77

    20-77 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show in-order-guarantee show in-order-guarantee T o display the present conf igured st ate of the in-order deli v ery feature, use the show in-order-guarantee command . show in-order -guarantee Syntax Descripti on This command has no ar[...]

  • Seite 78

    20-78 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface show interface Y ou can check the status of an interface at any time b y using the show interface command. show interface [ interface range ] [ bbcre dit ] | [ brief | counters | description ] [ cpp slot / pr ocess-number [...]

  • Seite 79

    20-79 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface Command Modes EXEC Command History This command was mod ified i n Cisco MDS SAN-OS Release 1.3(1). Usage Guidelines Y ou can specify a range o f interfaces b y issuing a command with t he follo wing e xample format: inter[...]

  • Seite 80

    20-80 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface The follo wing e xample display s in formation for a VSAN interface. switch# show int vsan 2 vsan2 is up, line protocol is up WWPN is 10:00:00:05:30:00:59:1f, FCID is 0xb90100 Internet address is 10.1.1.1/24 MTU 1500 bytes[...]

  • Seite 81

    20-81 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface Interface Status IP Address Speed MTU ------------------------------------------------------------------------------- vsan1 up 10.1.1.1/24 1 Gbps 1500 The follo wing e xample displ ays counter information for a FC IP inte[...]

  • Seite 82

    20-82 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface ------------------------------------------------------------------------------- Interface Input (rate is 5 min avg) Output (rate is 5 min avg) ----------------------------- ----------------------------- Rate Total Rate Tot[...]

  • Seite 83

    20-83 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface 0 Class 2/3 frames output, 0 bytes 0 Error frames 0 reass frames 16 receive B2B credit remaining 3 transmit B2B credit remaining. The follo wing e xample displays information for a Gig abit Ethernet int erface. switch# sh[...]

  • Seite 84

    20-84 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show interface Temperature : 34.98 Celsius Voltage : 3.31 Volt Current : 7.24 mA Optical Tx Power : -5.99 dBm Optical Rx Power : -23.01 dBm Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning switch# show interface fc2/5 tra[...]

  • Seite 85

    20-85 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ip access-list show ip access-list T o display the IP access control list s (IP-ACLs) currently acti ve, use the show ip access-list command. show ip access-list [ list-number | usage ] Syntax Descripti on Defaults None. Command Mo[...]

  • Seite 86

    20-86 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ip route show ip route T o display the ip routes currently act i ve, use the sho w ip r oute command. show ip r oute [ conf igured ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was in tro[...]

  • Seite 87

    20-87 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ip routing show ip routing T o display the IP routing state, us e the show ip routing command. show ip routing Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command Histor[...]

  • Seite 88

    20-88 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips a rp show ips arp T o display the IP storage AR P cache informaiton , use the show ips arp co mmand. show ips arp interface gigabitether net slot / port Syntax Descripti on Defaults None. Command Modes EXEC Command History This [...]

  • Seite 89

    20-89 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips ip route show ips ip route T o show the I P storage r oute table information, us e the show ips ip r oute command. show ips ip r oute in terface gigabite thernet slot / port Syntax Descripti on Defaults None. Command Modes EXEC[...]

  • Seite 90

    20-90 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips stats show ips stats T o display IP storage statistics, use the show ips stats co mmand. show ips stats { bu ffer | dma-bridge | icmp | ip | mac } interface gigabitether net slot / port show ips stats { hw-comp | tcp } { all | i[...]

  • Seite 91

    20-91 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips stats Examples The followi ng exampl e displays iSCSI b uf fer stat istics. switch# show ips stats buffer interface gigabitethernet 1/2 Buffer Statistics for port GigabitEthernet1/2 Mbuf stats 164248 total mbufs, 82119 free mbu[...]

  • Seite 92

    20-92 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips stats The follo wing example displays TCP statistics. switch# show ips stats tcp interface gigabitethernet 8/1 TCP Statistics for port GigabitEthernet8/1 Connection Stats 0 active openings, 0 accepts 0 failed attempts, 0 reset r[...]

  • Seite 93

    20-93 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ips sta tus show ips status T o dis play the IP storage status, use the show ips status command. show ips status [ module slot ] Syntax Descripti on Defaults None. Command Modes EXEC Command History This command was in troduced in [...]

  • Seite 94

    20-94 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi global show iscsi global T o display global iSCSI conf igured information, u se the show iscsi global command. show iscsi global Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EX[...]

  • Seite 95

    20-95 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi initiator show iscsi initiator T o display information about all the iS CSI nodes that are remote to the switch, u se the show iscsi initiator command. show iscsi initiator [ conf igur ed [ initiator -name ] | detail | fcp-se[...]

  • Seite 96

    20-96 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi initiator iSCSI Node name is iqn.1987-05.com.cisco.01.b6ca466f8b4d8e848ab17e92f24bf9cc iSCSI alias name: iscsi6-lnx Node WWN is 23:29:00:05:30:00:7e:a0 (dynamic) Member of vsans: 1, 2, 3, 4 Number of Virtual n_ports: 1 Virtual[...]

  • Seite 97

    20-97 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi session show iscsi session T o display iSCSI session information, use the show iscsi session command. show iscsi session [ incom ing ] [ initiator name ] [ outgoi ng ] [ target name ] [ detail ] Syntax Descripti on Defaults N[...]

  • Seite 98

    20-98 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi session The follo wing co mmand displays the specif ied iSCSI tar get. switch# show iscsi session target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d Initiator iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed963776[...]

  • Seite 99

    20-99 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats show iscsi stats T o display the iSCSI statis tics information, use the show iscsi stats command. show iscsi stats [ iscs i slot / port ] [ clear | detail ] Syntax Descripti on Defaults None. Command Modes EXEC Command [...]

  • Seite 100

    20-100 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats 0 Response pdus (with sense 0), 0 R2T pdus 0 Data-in pdus, 0 Data-in bytes iscsi8/4 5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec 5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec iSCSI statistics[...]

  • Seite 101

    20-101 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats 0 Data-in pdus, 0 Data-in bytes iSCSI Forward: Command: 0 PDUs (Received: 0) Data-Out (Write): 0 PDUs (Received 0), 0 fragments, 0 bytes FCP Forward: Xfer_rdy: 0 (Received: 0) Data-In: 0 (Received: 0), 0 bytes Response[...]

  • Seite 102

    20-102 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi stats The follo wing comman d displays detailed st atistics for the sp ecif ied iSCSI interface. switch# show iscsi stats iscsi 8/1 iscsi8/1 5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec 5 minutes output rate 0 b[...]

  • Seite 103

    20-103 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show iscsi virtual-target show iscsi virtual-target T o display all t he iSCSI no des that are local to the switch, use the show iscsi virtual- target command. show iscsi virtual-tar get [ conf igur ed ] [ name ] Syntax Descripti on De[...]

  • Seite 104

    20-104 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show isns show isns T o display iSNS informaiton, use the show isns command. show isns { pr of ile [ pr ofile-name [ counters ] | counters ] | query pr ofile-name { gigabitethernet slot / port | port-channel port }} Syntax Descripti on [...]

  • Seite 105

    20-105 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show isns The follo wing e xample displays iSNS PDU statistics fo r a specifi ed iSNS prof ile. switch# show isns profile ABC counters iSNS profile name ABC tagged interface GigabitEthernet2/3 iSNS statistics Input 54 pdus (registratio[...]

  • Seite 106

    20-106 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr show ivr T o display var ious inter -VSAN routin g (IVR) conf iguratio ns, use the show ivr command. show iv r [ status | virtual-domains [ vsan vs an-id ] | virtual-f cdomain-add-status | vsan-topology [ active | configur ed ][...]

  • Seite 107

    20-107 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr Examples The followi ng command displ ays the status of the IVR virtual domain conf iguration. switch# show ivr virtual-fcdomain-add-status IVR virtual domains are added to fcdomain list in VSANS: 1 (As well as to VSANs in int[...]

  • Seite 108

    20-108 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr The follo wing e xample display s the IVZ conf iguration switch# show ivr zone zone name Ivz_vsan2-3 pwwn 21:00:00:e0:8b:02:ca:4a vsan 3 pwwn 21:00:00:20:37:c8:5c:6b vsan 2 zone name ivr_qa_z_all pwwn 21:00:00:e0:8b:06:d9:1d vs[...]

  • Seite 109

    20-109 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ivr switch# show ivr vsan-topology configured AFID SWITCH WWN Active Cfg. VSANS -------------------------------------------------------------- 1 20:00:00:05:30:00:3c:5e yes yes 3,2000 1 20:00:00:05:30:00:58:de yes yes 2,2000 1 20:[...]

  • Seite 110

    20-110 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show kern el core show kernel core T o display kernel co re conf iguration infor mation, use the show kern el co re command. show kernel cor e { limit | module slot | target } Syntax Descripti on Defaults None. Command Modes EXEC Comman[...]

  • Seite 111

    20-111 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show license show license T o display license information, use the sho w lice nse command. show license [ brief | fil e fil en a me | host-id license-name | usage ] Syntax Descripti on Defaults None. Command Modes EXEC Command History [...]

  • Seite 112

    20-112 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show license The follo wing e xample displays the ho st IDs, required to request node lock ed license. switch# show license host-id License hostid:VDH=4C0AF664[...]

  • Seite 113

    20-113 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show line show line T o configure a virtual t erminal line , use the show line command. show line [ com1 [ user -input-string ] | co nsole [ connected | user -input-string ]] Syntax Descripti on Defaults None. Command Modes EXEC. Comma[...]

  • Seite 114

    20-114 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show line line aux Conf igures the auxili ary COM 1 po rt clear line Deleted configured li ne sessions. Command Description[...]

  • Seite 115

    20-115 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging show logging T o display the current system message logging conf iguration, use the show logging comman d. show logging [ console | level [ auth | authpriv | callho me | cron | daemon | ftp | kernel | local n | lpr | mail [...]

  • Seite 116

    20-116 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging syslog_get_levels :: Error(-1) querying severity values for fcmpls at SAP 30 syslog_get_levels :: Error(-1) querying severity values for fcfwd at SAP 38 Facility Default Severity Current Session Severity -------- ----------[...]

  • Seite 117

    20-117 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging The follo wing e xample displ ays console log ging status. switch# show logging console Logging console: enabled (Severity: notifications) The follo wing e xample display s logging facili ty status. switch# show logging fa[...]

  • Seite 118

    20-118 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warnings) 5(notifications) 6(information) 7(debugging) The follo wing e xample display s logging informatio n. switch# show logging info Logging console: enabled (Severity: n[...]

  • Seite 119

    20-119 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show logging fcfwd 0 0 ntp 2 2 platform 5 5 vrrp_eng 2 2 callhome 2 2 mcast 2 2 rscn 2 2 securityd 2 2 vhbad 2 2 rib 2 2 vshd 5 5 0(emergencies) 1(alerts) 2(critical) 3(errors) 4(warnings) 5(notifications) 6(information) 7(debugging) T[...]

  • Seite 120

    20-120 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show module show module T o verify the status of a module, use the show module command. show module [ slot | diag | uptime ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was mod ified i n Cisc[...]

  • Seite 121

    20-121 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show module Use the uptime option to display the time t hat a specifi ed supervisor module, swi tching module, or services module is functional in the switch. This t ime is comp uted from the time a modu le goes online after a disrupti[...]

  • Seite 122

    20-122 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ntp show ntp T o display the configured Network T ime Protocol (NTP) server and peer associations, use the show ntp command. show ntp { peers | statistics [ io | local | memory | peer { ipaddr ip-addr ess | name peer -name }] | tim[...]

  • Seite 123

    20-123 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ntp Examples The followi ng exampl es display the NTP informatio n. switch# show ntp peers -------------------------------------------- Peer IP Address Serv/Peer -------------------------------------------- 10.20.10.2 Server 10.20[...]

  • Seite 124

    20-124 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-ch annel show port-channel Use the show port-channel command to v ie w information about e xisting Port Channel conf igurations show port-channel {compatibility-paramet ers | consistency [ detail ] | database [ interface port-[...]

  • Seite 125

    20-125 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-channel The follo wing e xample displays the Po rtChannel database. switch# show port-channel database port-channel 2 Administrative channel mode is on Operational channel mode is on Last membership update succeeded First ope[...]

  • Seite 126

    20-126 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-secu rity show port-security T o display configu red port securi ty feature information, use the show port-security database comman d. show port-security { database [ active [ vsan vsan-id ]] | fwwn fwwn-id vsan vsan-id | i nt[...]

  • Seite 127

    20-127 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-security ---------------------------------------------------------------------------------------- 1 21:00:00:e0:8b:06:d9:1d(pwwn) 20:0d:00:05:30:00:95:de(fc1/13) 1 50:06:04:82:bc:01:c3:84(pwwn) 20:0c:00:05:30:00:95:de(fc1/12)[...]

  • Seite 128

    20-128 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show port-secu rity Number of sWWN deny : 0 ... The follo wing e xample displays the statu s of the acti ve database and the auto-learn conf iguration. switch# show port-security status VSAN 1 :Activated database, auto-learning is enabl[...]

  • Seite 129

    20-129 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show proces ses show processes T o display general information about all the processes, use the sho w processes command. show processes [ cpu | log [ details | pid pr ocess-id ] | memory ] Syntax Descripti on Defaults None. Command Mod[...]

  • Seite 130

    20-130 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show processes PC: Current program counter in hex format Start_cnt: how many times a process has been started. TTY: Terminal that controls the process. A “-” usually means a daemon not running on any particular tty. Process: name of[...]

  • Seite 131

    20-131 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show proces ses The follo wing e xample displays the detail log informat ion about a particular process. switch# show processes log pid 1339 Service: fspf Description: FSPF Routing Protocol Application Started at Sat Jan 5 03:23:44 198[...]

  • Seite 132

    20-132 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show qos show qos T o display the current QoS settings along w ith a the number of frames mark ed high prio rity , use the show qos command. show qos { class-map [name class-name ] | dw rr | policy-map [name policy-name ] | serv ice pol[...]

  • Seite 133

    20-133 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show qos The follo wing example displays the co ntents of a specified class map. switch# show qos class-map name MyClass qos class-map MyClass match-any match dest-wwn 20:01:00:05:30:00:28:df match src-wwn 23:15:00:05:30:00:2a:1f match[...]

  • Seite 134

    20-134 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show radius-s erver show radius-server T o display all conf igured RADIUS serv er parameters, use the sho w radius-server command. show radius-serv er [ groups | so rted ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Comm[...]

  • Seite 135

    20-135 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir show rlir T o display the information about Re gistered Link Incident Rep ort (RLIR), Link Incident Record Registration (LIRR), an d Distrib ute Re gistered Link Incident Record (D RLIR) frames, use the show rlir command. sho[...]

  • Seite 136

    20-136 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir Statistics for VSAN: 4 ------------------------- Number of LIRR received = 0 Number of LIRR ACC sent = 0 Number of LIRR RJT sent = 0 Number of RLIR sent = 0 Number of RLIR ACC received = 0 Number of RLIR RJT received = 0 Numbe[...]

  • Seite 137

    20-137 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir Total number of entries = 1 Established Registration List for VSAN: 100 ---------------------------------------------- FC-ID LIRR FORMAT REGISTERED FOR ---------------------------------------------- 0x0b0500 0x18 conditional [...]

  • Seite 138

    20-138 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rlir The follo wing e xample display s recent RLIRs for a specif ied interf ace. switch# show rlir recent interface fc1/1 Recent link incident records ---------------------------------------------------------------------------- *Ho[...]

  • Seite 139

    20-139 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show role show role T o display roles (and their associat ed rules) conf igured on t he switch, including t hose roles that ha ve no t yet been committed to persistent sto rage, use the show r ole command. show role [ name string ] Syn[...]

  • Seite 140

    20-140 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rsc n show rscn T o d is p l ay registered state change notif ication (R S C N) i n fo r m at i o n, u s e t h e show rscn command. show rscn { scr -table [ vsan vsan-id ] | statistics [ vsan vsan-id ]} Syntax Descripti on Defaults[...]

  • Seite 141

    20-141 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show rscn switch# show rscn statistics vsan 1 Statistics for VSAN: 1 ------------------------- Number of SCR received = 0 Number of SCR ACC sent = 0 Number of SCR RJT sent = 0 Number of RSCN received = 0 Number of RSCN sent = 0 Number [...]

  • Seite 142

    20-142 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show running- config show running-config T o display the running confi guration f ile, use the show running-conf ig command show running-conf i g [ diff | interface [cpp | fc | fc slot / port | fc-tunnel tunn el-id | fcip fcip-number | [...]

  • Seite 143

    20-143 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show running-config Examples The following e xample displays the configur ation current ly running on the swi tch. switch# show running-config Building Configuration ... interface fc1/1 interface fc1/2 interface fc1/3 interface fc1/4 i[...]

  • Seite 144

    20-144 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show running- config switch# show running-config interface mgmt0 interface mgmt0 ip address 255.255.255.0 255.255.255.0 The follo wing e xample displays running conf igurati on information for a speci fi ed feature—in this case, VSANS[...]

  • Seite 145

    20-145 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show scsi-target show scsi-target T o display information about e xisting SCSI t ar get config urations, use the sho w scsi-target command. show scsi-target { auto-poll | custom-list | devices [ vsan vsan-id ] [ fcid fcid-id ] | disk [[...]

  • Seite 146

    20-146 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show scsi-target The follo wing e xample displ ays a customized disc ov ered targets: switch# show scsi-target custom-list --------------- VSAN DOMAIN --------------- 1 56 The follo wing e xample displays discov ered disk informati on. [...]

  • Seite 147

    20-147 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show scsi-target The follo wing example displays the port WWN that is assigned to each OS (W in dows, AIX, Solaris, Linux, or HPUX). switch# show scsi-target pwwn ------------------------------ OS PWWN ------------------------------ WI[...]

  • Seite 148

    20-148 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show snmp show snmp T o display the count information for al l SNMP settings, use the sho w snmp command. show snmp [ community | host | user ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was[...]

  • Seite 149

    20-149 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show snmp The follo wing e xample displays SNMP user detail s. switch# show snmp user User Group Auth Priv ____ _____ ____ ____ steve network-admin md5 des sadmin network-admin md5 des stever network-operator md5 des The follo wing e x[...]

  • Seite 150

    20-150 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show span session show span session T o display specific information about a S w it c h e d P o r t A n al y z e r ( SP AN) session, use the show span session command. show span session [ session-id [ brief ] | brief ] Syntax Descripti [...]

  • Seite 151

    20-151 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show span session The follo wing example displays all SP AN sessions. switch# show span session Session 1 (inactive as no destination) Destination is not specified Session filter vsans are 1 No ingress (rx) sources No egress (tx) sourc[...]

  • Seite 152

    20-152 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show spr om show sprom T o display vendor I D, product component attrib utes, se rial number information th at can be used to track field replacable units, use the show spr om command. show spro m { backplane backplane-index | clock clo[...]

  • Seite 153

    20-153 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show sprom Examples The followi ng exampl e displays managemen t module information. Thi s module and command are specific to the Cisco MDS 9216 switch. switch# show sprom mgmt-module DISPLAY SAM sprom contents: Common block: Block Sig[...]

  • Seite 154

    20-154 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show spr om Serial Number : abcdefgh Part Number : 73-7523-06 Part Revision : 0.0 Mfg Deviation : 0.0 H/W Version : 0.0 Mfg Bits : 0 Engineer Use : 0 snmpOID : 9.5.1.3.1.1.2.2000 Power Consump : -524 RMA Code : 0-0-0-0 Supervisor Module[...]

  • Seite 155

    20-155 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ssh show ssh T o dis play Secure Shell in formation (SSH), use the show ssh command. show ssh { key [ dsa | rsa | rsa1 ] | server } Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was in tr[...]

  • Seite 156

    20-156 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ssh The follo wing e xample display s Host K ey P air detail s. switch# show ssh key rsa1 Keys generated:Sun Jan 13 07:16:26 1980 1024 35 fingerprint: 1024 67:76:02:bd:3e:8d:f5:ad:59:5a:1e:c4:5e:44:03:07 could not retrieve rsa key [...]

  • Seite 157

    20-157 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config show startup-config T o display the startup conf iguration f ile, use the show startup-conf ig command show startup-conf ig [ log ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This co[...]

  • Seite 158

    20-158 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config interface port-channel 5 switchport mode E no switchport trunk allowed vsan all switchport trunk allowed vsan add 1-10interface port-channel 5 switchport mode E no switchport trunk allowed vsan all switchport trunk a[...]

  • Seite 159

    20-159 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config interface fc2/6 channel-group 2 force no shutdown interface fc2/7 switchport mode E no shutdown no switchport trunk allowed vsan all switchport trunk allowed vsan add 1-25 interface fc2/9 switchport mode E switchpor[...]

  • Seite 160

    20-160 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show startup-config interface fc9/16 switchport mode FL no shutdown interface mgmt0 ip address 172.22.90.38 255.255.255.0 no shutdown[...]

  • Seite 161

    20-161 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show switchname show switchname T o display the switch network name, u se the show s witchname co mmand. show switchname [ serialnum ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was in trod[...]

  • Seite 162

    20-162 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system show system T o display the system information, use the show system command. show system { cores | defaul t switchport | dir ectory inf ormation | error -id { he x-id | list } | exception-inf o | pss shrink status [ details [...]

  • Seite 163

    20-163 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system Examples The followi ng exampl e displays the system r edundanc y status. switch# show system redundancy status Redundancy mode --------------- administrative: HA operational: None This supervisor (sup-2) ------------------[...]

  • Seite 164

    20-164 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system The follo wing e xample displays system-related CPU and memory statistics. switch# show system resources Load average: 1 minute: 0.43 5 minutes: 0.17 15 minutes: 0.11 Processes : 100 total, 2 running CPU states : 0.0% user, [...]

  • Seite 165

    20-165 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system health show system health T o display configur ed Online System Heal th Management (OSHM) informatio n, use the show system health command. show system health [module slot | statistics [ loopback [ interface { fc slot / por[...]

  • Seite 166

    20-166 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system health The follo wing e xample displays the current health of a sp ecif ied module. switch# show system health module 8 Current health information for module 8. Test Frequency Status Action ----------------------------------[...]

  • Seite 167

    20-167 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show system health The follo wing e xample displays the stati stics for a specif ied module. switch# show system health statistics module 3 Test statistics for module # 3 ----------------------------------------------------------------[...]

  • Seite 168

    20-168 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tacacs-s erver show tacacs-server T o display configured T ACA CS+ servers and groups inf ormation, use the show tacacs-server command. show tacacs-serv er [ groups | s orted ] Syntax Descripti on Defaults None. Command Modes EXEC [...]

  • Seite 169

    20-169 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-support show tech-support T o display information useful to technical sup port when reportin g a problem, use the sho w tech-support command. show tech-support [ brief | details | interface { fc slot / port | gigabitether net[...]

  • Seite 170

    20-170 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-s upport • show processes log details Examples The followi ng exampl e displays techni cal support informatio n for a specif ic module. switch# show tech-support module 1 'terminal length 0' 'show module &apos[...]

  • Seite 171

    20-171 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-support The sho w tech-support brief command provi des a summary of the current r unning state of the sw itch. vegas01# show tech-support brief Switch Name : vegas01 Switch Type : DS-X9216-K9-SUP Kickstart Image : 1.3(2a) boo[...]

  • Seite 172

    20-172 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tech-s upport fc1/11 1 auto on fcotAbsent -- -- -- fc1/12 1 auto on fcotAbsent -- -- -- fc1/13 1 auto on fcotAbsent -- -- -- fc1/14 1 auto on fcotAbsent -- -- -- fc1/15 1 auto on fcotAbsent -- -- -- fc1/16 1 auto on fcotAbsent -- -[...]

  • Seite 173

    20-173 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show telnet server show telnet server T o dis play the state of the T elnet access configuration, use the show telnet serv er command. show telnet server Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. [...]

  • Seite 174

    20-174 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show terminal show terminal T o display the terminal information, use the sho w terminal command show terminal Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command History Thi[...]

  • Seite 175

    20-175 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tlport show tlport T o display configur ed TL port inf ormation, use the sho w tlport command show tlport { alpa-cache | discapp fcid fcid-id [ vsan vsan-id ] [ ver bo se ] | interface fc slot / port { all | private | pr oxied | t[...]

  • Seite 176

    20-176 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show tlport Examples The followi ng exampl e displays the TL ports in all VSANs. switch# show tlport list ------------------------------- Interface Vsan FC-ID State ------------------------- ------ fc1/16 1 0x420000 Init fc2/26 1 0x1500[...]

  • Seite 177

    20-177 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show trunk protocol show trunk protocol T o display trunk protocol status, use the sho w trunk protocol command. show trunk protocol Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mo[...]

  • Seite 178

    20-178 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show user-acc ount show user-account T o display configur ed informati on about user accounts, use the show user -account command. show user -account [ user-name | iscsi ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Comm[...]

  • Seite 179

    20-179 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show users show users T o dis play all users currently accessing the switch, use the show users command. show users Syntax Descripti on This command has no ar guments or k eywo rds. Defaults None. Command Modes EXEC mode. Command Histo[...]

  • Seite 180

    20-180 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ver sion show version T o display the versi on of system softw are that is curren tly running on the switch, use th e sho w version command. show vers ion [ epld ur l | image { bootflash: | slot0: | volati le: } image -file na me |[...]

  • Seite 181

    20-181 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show version switch# show version image bootflash:bad_image <-------------- f ailure case Md5 Verification Failed Image integrity check failed The follo wing e xample displ ays current EP LD versions for a specified module. switch# [...]

  • Seite 182

    20-182 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show ver sion Hardware RAM 1024584 kB bootflash: 1000944 blocks (block size 512b) slot0: 0 blocks (block size 512b) 172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s) Last reset at 970069 usecs after Tue Sep 16 22:31:25 198[...]

  • Seite 183

    20-183 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vrrp show vrrp T o display the VRRP confi gur ation informati on, use the show vrrp command. show vrrp [ statistics | vr gr oup [ interface type ]] Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This c[...]

  • Seite 184

    20-184 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vrrp The follo wing e xample displays VRRP stat istics. switch# show vrrp vr 7 interface vsan 2 statistics vr id 7 statistics Become master 0 Advertisement 0 Advertisement Interval Error 0 Authentication Failure 0 TTL Error 0 Prior[...]

  • Seite 185

    20-185 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vsan show vsan T o display information about con fi gured VSAN, use the show vsan command. show vsan [ vsan-id [ membership ] | membership interface { fc slot / port | fcip fcip-id | fv slot / dpp-number / fv-port | iscsi slot / p[...]

  • Seite 186

    20-186 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vsan Examples The followi ng exampl es displays conf igured VSAN information. switch# show vsan 1 vsan 1 information name:VSAN0001 state:active interoperability mode:yes ß verify mode loadbalancing:src-id/dst-id/oxid operational s[...]

  • Seite 187

    20-187 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show vsan vsan 4094:isolated_vsan switch# show vsan membership interface fv 2/1/3 , fv2/1/5 - 7 fv2/1/3 vsan:2 allowed list:1-4093 fv2/1/5 vsan:3 allowed list:1-4093 fv2/1/6 vsan:4 allowed list:1-4093 fv2/1/7 vsan:4 allowed list:1-409[...]

  • Seite 188

    20-188 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show wwn show wwn T o display the status of the WWN conf iguratio n, use the show ww n commands. show wwn { status block-id number | switch } Syntax Descripti on Defaults None. Command Modes EXEC mode. Command History This command was i[...]

  • Seite 189

    20-189 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone show zone T o dis play zone information, use the show zone command. show zone [ active [ vsan vsan-id ] | ess [ vsan vsan-id ] | member { fcalias alias-name | fcid fcid-id [ lun lun-id ] | pwwn wwn [ lun lun-id ]} [ active | [...]

  • Seite 190

    20-190 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone zone name Zone1 vsan 1 pwwn 21:00:00:20:37:6f:db:dd pwwn 21:00:00:20:37:a6:be:2f pwwn 21:00:00:20:37:9c:48:e5 fcalias Alias1 zone name Techdocs vsan 3 ip-address 10.15.0.0 255.255.255.0 The follo wing e xample displ ays zone i[...]

  • Seite 191

    20-191 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone The follo wing e xample displays all zones to which a member belong s using the FC ID. switch# show zone member pwwn 21:00:00:20:37:9c:48:e5 VSAN: 1 zone Zone3 zone Zone1 fcalias Alias1 The follo wing e xample displays the nu[...]

  • Seite 192

    20-192 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone The follo wing e xample displays the status of conf igured zo nes. switch# s how zone status VSAN: 1 default-zone: permit distribute: active only Interop: 100 Full Zoning Database : Zonesets:0 Zones:0 Aliases: 0 Active Zoning [...]

  • Seite 193

    20-193 Cisco MDS 9000 Family C ommand Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zonese t show zoneset T o dis play the conf igured zone sets, use the show zoneset co mmand . show zoneset [ name zoneset-name ] [ brief ] [ active ] [ vsan vsan-id ] Syntax Descripti on Defaults None. Command Modes EXEC mode. Com[...]

  • Seite 194

    20-194 Cisco MDS 9000 Family Command Reference 78-16088-01, Cisco MDS SAN-OS Release 1.3 Chapter 20 Show Commands show zone set The follo wing e xample displ ays conf igured zone set info rmation for a sp ecif ic VSAN. switch# show zoneset vsan 2-3 zoneset name ZoneSet2 vsan 1 zone name Zone2 vsan 1 fwwn 20:52:00:05:30:00:2a:1e fwwn 20:53:00:05:30:[...]