Deutsch dropdown-ico

Cisco Systems SCE 2000 4xGBE Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Cisco Systems SCE 2000 4xGBE an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Cisco Systems SCE 2000 4xGBE, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Cisco Systems SCE 2000 4xGBE die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Cisco Systems SCE 2000 4xGBE. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Cisco Systems SCE 2000 4xGBE sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Cisco Systems SCE 2000 4xGBE
- Den Namen des Produzenten und das Produktionsjahr des Geräts Cisco Systems SCE 2000 4xGBE
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Cisco Systems SCE 2000 4xGBE
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Cisco Systems SCE 2000 4xGBE zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Cisco Systems SCE 2000 4xGBE und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Cisco Systems finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Cisco Systems SCE 2000 4xGBE zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Cisco Systems SCE 2000 4xGBE, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Cisco Systems SCE 2000 4xGBE widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    Corporate Headquarters Cisco S ystem s, In c. 170 West Tasman Driv e San Jose, CA 9 5134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS ( 6387) Fax: 408 526-4100 Customer Order Number: DOC-7824-04= Text Part Number: OL -7824-04 Cisco SCE 2000 4xGBE Inst allation and Configuration Guide Version 3.0 OL-7824-04[...]

  • Seite 2

    THE SPECIFICATIONS AND INFORMATION REGARDING THE PRO DUCTS IN THIS MANUAL ARE SUBJ ECT TO CHANGE WI THOUT NOTICE. ALL S TATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIN D, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONS IBILITY FOR THEIR APPLICATION OF ANY PRODUC[...]

  • Seite 3

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 i Preface v Document Revision History v Audience v Organization vi Related Publications vii Conventions vii Obtaining Documentation ix World Wide Web ix Documentation CD-ROM ix Ordering Documentation ix Documentation Feedback x Obtaining Technical Assistance x Cisco.com x Technica[...]

  • Seite 4

    Content s Cisco SCE 2000 4xGBE Installation and Configuration Guide ii OL-7824-04 Back Panel 2-4 Checking the Shipping Container Contents 2-5 SCE 2000 Component List 2-6 SCE 2000 Installation Checklist 2-7 Topology 3-1 The SCE 2000 Platform 3-1 Topology Considerations 3-1 Functionality 3-2 Number of links 3-2 Redundancy 3-2 Link Continuity 3-3 Phys[...]

  • Seite 5

    Contents Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 iii Removing and Replacing the Fan Module 4-20 Replacing the Battery 4-22 Connecting the Management Interfaces and Performing Initial System Configuration 5-1 Connecting the Local Console 5-1 Setting Up the Local Console 5-2 Initial System Configuration 5-3 Setup Command [...]

  • Seite 6

    Content s Cisco SCE 2000 4xGBE Installation and Configuration Guide iv OL-7824-04 Starting the System and Observing Initial Conditions 7-2 Final Tests 7-3 Managing SCE 2000 Configurations 7-4 Viewing Configuration 7-4 Saving the Configuration Settings 7-6 Recovering a Previous Configuration 7-8 Performing Complex Configurations 7-9 Rebooting and Sh[...]

  • Seite 7

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 v This preface describes who should read the SCE 2000 4xGBE Installation and Configuratio n Guide , how it is or ganized, a nd its document conventions. Document Revision History Cisco Service Control Release Part Number Publication Date Release 3.0 OL-7824-03 December, 2005 D ESC[...]

  • Seite 8

    Preface Organization Cisco SCE 2000 4xGBE Installation and Configuration Guide vi OL-7824-04 Organization The major sections of this guide are as follows: Chapter Title Description 1 Introductio n This chapter provides a b rief intr oduction to Cisco Servi ce Control. 2 Overview (on page 2-1 ) This chapte r provides a hardw are overvie w of the SCE[...]

  • Seite 9

    Preface Related Publications Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 vii Related Publications Y our SCE 2000 platform and the software running on it contain extensive features and functionality , which are documented in the following resources: • Cisco CLI software: • Cisco Service Contr ol Engine (SCE) Softwar e Co[...]

  • Seite 10

    Preface Conventions Cisco SCE 2000 4xGBE Installation and Configuration Guide viii OL-7824-04 [x | y | z] Optional alter native keywo rds are groupe d in bracket s and separate d by vertical bars. string A nonquoted set of char acters. Do not use quotation mark s aroun d the string, or the string will include the quotation marks. screen font Termin[...]

  • Seite 11

    Preface Obtaining Documentation Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 ix Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World W ide W eb Y ou can access the most current Cisco documentation on the W orld W ide W eb at the following sites: • http://www .[...]

  • Seite 12

    Preface Obtaining T echnical Assistance Cisco SCE 2000 4xGBE Installation and Configuration Guide x OL-7824-04 Documentation Feedback If you are reading Cisco product documentation on the W o rld W ide W eb, you can submit technical comments electronically . Click Feedback in the toolbar and select Documentation . After you complete the form, click[...]

  • Seite 13

    Preface Obtaining T echnical Assistance Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 xi T echnical Assistance Center The Cisco T AC website is a vailable to all customers who need technical assistance with a Cisco product or technology that is under warrant y or covered by a maintenance contract. Cont acting T AC by Using th[...]

  • Seite 14

    [...]

  • Seite 15

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 1-1 This chapter provides a general overview of the Ci sco Service Control solution. It introduces the Cisco Service Control concept and the Service C ontrol capabilities. It also briefly describes the hardware capabilities of the Service Control Engine (SCE) platform, as well as [...]

  • Seite 16

    Chapter 1 Overview Cisco Service Control Capabilities Cisco SCE 2000 4xGBE Installation and Configuration Guide 1-2 OL-7824-04 Service Control for Broadband Service Providers Service providers of any access technology (DSL, cab le, mobile, and so on) tar geting residential and business consumers must find new ways to get maximum leverage from their[...]

  • Seite 17

    Chapter 1 Overview The SCE Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 1-3 Programmability is required for new services to be deployed quickly , and it provides an easy upgrade path for network, application, or service growth. • Robust and flexible back-off ice integration—Th e ability to integrate with existin[...]

  • Seite 18

    Chapter 1 Overview Management and Collection Cisco SCE 2000 4xGBE Installation and Configuration Guide 1-4 OL-7824-04 The following diagram illustrates a common deploy ment of an SCE platform in a network. Figure 1-1: SCE Platfor m in the Network Management and Collection The Cisco Service Control solution includes a comp lete management infrastruc[...]

  • Seite 19

    Chapter 1 Overview Service Configuration Management Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 1-5 Network Management Cisco provides complete network FCAPS (Fault, Configuration, Accounting, Performance, Security) Management. T wo interfaces are provided for network management: • Command-Line Interface (CLI)—The CLI is[...]

  • Seite 20

    [...]

  • Seite 21

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 2-1 This chapter provides an introduction to the SCE 2000 4xGBE Platform , the Service Control hardware component. This chapter contains the following sections: • The SCE Platform 2-1 • Front Panel 2-2 • Back Panel 2-4 • Checking the Shipping Container Contents 2-5 • SCE[...]

  • Seite 22

    Chapter 2 Introduction to the SCE Platform Front Panel Cisco SCE 2000 4xGBE Installation and Configuration Guide 2-2 OL-7824-04 Front Panel The SCE 2000 Front Panel consists of ports and LED s as shown in the following figure and tables. Figure 2-1: SCE 2000 Front Panel T able 2-2 SCE 2000 Por ts Port Quantity Description Connect This Port To… Mn[...]

  • Seite 23

    Chapter 2 Introduction to the SCE Platform Front Panel Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 2-3 T able 2-3 SCE 2000 LED Groups LED Groups Description Power A • Continu ous green — Power s upply A is funct ioning n ormally • Red — Powe r supply A present, but ma lfunctioni ng • Unlit — Power supply A is ei[...]

  • Seite 24

    Chapter 2 Introduction to the SCE Platform Back Panel Cisco SCE 2000 4xGBE Installation and Configuration Guide 2-4 OL-7824-04 LED Groups Description Mng The Mng port LEDs indicate the operational status of the SCE 2000 out-of-ban d LAN-based m anagement port , as follows: • Link/Active Green — indicates that the port link is up Unlit — indic[...]

  • Seite 25

    Chapter 2 Introduction to the SCE Platform Checking the Shipping Container Contents Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 2-5 Figure 2-3: SCE 2000 Back Panel DC po w er Checking the Shipping Container Contents Use the SCE 2000 Component List to check the contents of the SCE 2000 platform shipping container . Do not di[...]

  • Seite 26

    Chapter 2 Introduction to the SCE Platform Checking the Shipping Container Contents Cisco SCE 2000 4xGBE Installation and Configuration Guide 2-6 OL-7824-04 SCE 2000 Component List T able 2-4 SCE 2000 Component List Component Description Received SCE 2000 platform SCE 2020 4xGBE platfor m configured with either AC or DC power supplies. Accessories [...]

  • Seite 27

    Chapter 2 Introduction to the SCE Platform SCE 2000 Installation Checklist Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 2-7 SCE 2000 Installation Checklist T o assist y ou with your installation and to provide a historical record of what was done by whom, photocopy the following SCE 2000 Installation Checklist. Indicate when[...]

  • Seite 28

    [...]

  • Seite 29

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 3-1 This chapter describes the possible deployment topologies of the SCE 2000 . The Cisco SCE solution offer s a number of basic topolog y options that permit the user to tailor the SCE Platform to fit the needs of a particular installation. An understanding of the various issues [...]

  • Seite 30

    Chapter 3 T opology T opology Consider ations Cisco SCE 2000 4xGBE Installation and Configuration Guide 3-2 OL-7824-04 • Number of links — The SCE 2000 m ay be connected to one or two GBE links. This is relevant for both Inline and Receive-Only topologies. • Redundancy — Must the system be designed to guarantee uninterrupted SCE 2000 functi[...]

  • Seite 31

    Chapter 3 T opology T opology Consider ations Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 3-3 Link Continuity The bypass mechanism of the SCE 2000 allows traffic to continue to flow , if desired, even if the device itself is not functioning. Note that when the SCE 2000 is connected to the network throug h an optical splitte[...]

  • Seite 32

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide 3-4 OL-7824-04 Physical T opologies Following are descriptions of a number of physical topologies that the SCE 2000 supports. Single SCE 2000 T opologies A single SCE 2000 supports both single GBE link and dual GBE link topologies. Single Link: Inline[...]

  • Seite 33

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 3-5 Dual link: Inline Inst allation In this topology , one SCE 2000 is connected inline in two full dupl ex, GBE links. In case the two links are load-shared, asymmetrical routing might occur , and some of the flows may be split, i.e. the u[...]

  • Seite 34

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide 3-6 OL-7824-04 Single Link: Receive-only T opology In this topology , an optical sp litter resides physically on the GBE link between the subscribers and the network. The traf fic passes through the op tical splitter, which splits traf fic to the SCE [...]

  • Seite 35

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 3-7 Dual Link: Receive-Only T opology In this topology , one SCE 2000 is connected in receive-only m ode to two full duplex, GBE links using optical splitters. If the two links are load-s hared, asymmetrical routing might occur , and some o[...]

  • Seite 36

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide 3-8 OL-7824-04 T wo Cascaded SCE 2000s For Dual Links In this topology , two cascaded SCE 2000 s are used. This allows a fa il-over solution, where in case of a failure of one SCE 2000 , the functionality that th e SCE 2000 provides is preserved by th[...]

  • Seite 37

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 3-9 • When one SCE 2000 fails (depending on the type of failure) its link traf fic is still bypassed to the functioning SCE 2000 and processed there, so the traf fic processing continues for both the links. • The bypass of the traffic t[...]

  • Seite 38

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide 3-10 OL-7824-0 4 • Receive-only — The SCE 2000 does not reside physically on the data link. Data is forwarded to the SCE 2000 via an external switch. The SCE 2000 itself receives only and does not transmit. • Cascade — Indicates a two SCE 2000[...]

  • Seite 39

    Chapter 3 T opology Physical T opologies Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 3-11 • Non-redundant inline topology if value-added services are crucial and are more important than maintaining connectivity . • Bypass mode is required for the following: • Non-redundant inline topology if conne ctivity is crucial.[...]

  • Seite 40

    [...]

  • Seite 41

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-1 This chapter explains how to install a SCE 2000 platform in a rack or in a general tabletop or workbench installation. Additionally , this chapter contains instructions for install ing or replacing the power supply units and fan modules. Warning Before you install, operate, or[...]

  • Seite 42

    Chapter 4 Installation and Maintenance Preparing to Install the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-2 OL-7824-04 Figure 4-1: SCE 2000 Measur ements T able 4-1 SCE 2000 Dimensio ns Dimension Measurement Height 3.47 inches (9.5 cm) Width 17.4 inches (4.43 cm ) Depth 18 inches (4.6 cm ) Weight 33 lb (15 kg) T [...]

  • Seite 43

    Chapter 4 Installation and Maintenance Preparing to Install the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-3 Site Requirement Guidelines The environmental monitoring functionality in the SCE 2000 protects the system and components from potential damage from over -voltage and ove r-tem perature condition[...]

  • Seite 44

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-4 OL-7824-04 *Short term is defined as not more than 96 consecu tive hours, not more than 15 days in one year . 360 hours total in any given year , but no more than 15 occurrences in a one-year period. T able 4-3 SCE 2[...]

  • Seite 45

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-5 Installation Precautions The router should already be in the area where you will install it, and your installation location should already be determined. If not, see Site Requir ement Guidelines (on page 4[...]

  • Seite 46

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-6 OL-7824-04 Step 3 V iew the bottom panel by lifting the SCE 2000 , placing your hands around the SCE 2000 sides and lifting the SCE 2000 from underneath. T o prevent injury , avoid sudden twists or moves. There are f[...]

  • Seite 47

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-7 Att aching the Bracket s to the SCE 2000 Before installing the SCE 2000 in the rack, you must first install an appropriate rack-m ount bracket on each side of the front of the SCE 2000 , as illustrated in [...]

  • Seite 48

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-8 OL-7824-04 Att aching the Crossrail Support s to the Rack When mounting in a rack with four posts (front and back) the two crossrail supports are m ounted one on each side of the rack. The SCE 2000 t hen slides into [...]

  • Seite 49

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-9 This completes the steps for attaching th e rack-mount supporti ng brackets to the rack. Y ou are now ready to mount the SCE 2000 to the rack. Mounting the System to the Rack When the appropriate mounting [...]

  • Seite 50

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-10 OL-7824-0 4 Step 4 While keeping the brackets flush against the posts or m ounting strips, align the holes in the brackets with the holes on the rack or mounting strip. Figure 4-9: Securing the SCE 20 00 to the Rack[...]

  • Seite 51

    Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-11 Step 3 Attach the grounding cable (green and yellow colore d cable), firmly fastening the (enclosed) hex nuts and spring washers with a #¼” hex wrench (refe r to the appropriate figure for an AC- or DC[...]

  • Seite 52

    Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-12 OL-7824-0 4 Power Supply Overview The SCE 2000 is available in two power options: • Dual line feed AC power — SCE 2000 is shipped with two appropriate AC power supply cords. • Dual line feed DC power — requires appropr[...]

  • Seite 53

    Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-13 LEDs The following LEDs are used to monitor the functioning of the power supply u nits: • On the power supply unit (both AC-input and DC-input): • IN LED (green) • OK LED (green) • On the Fr ont Panel (on pa[...]

  • Seite 54

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-14 OL-7824-0 4 Note Simple Netw ork Managem ent Protoc ol (SNMP) m onitors t he activity of t he powe r supplies. I n most cases when a power su pply problem occurs, an SNMP trap is sent in SNMP an d th e ap[...]

  • Seite 55

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-15 ESD Warning Do not remove or install modules without usi ng appropriate anti-static guard m easures. T he SCE 2000 includes an anti-static wrist strap in t he accessory kit. Attach the copper t[...]

  • Seite 56

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-16 OL-7824-0 4 Powering Down a DC-Input Power Supply Unit and Removing the DC-Input Leads T o power down a DC-input power supply to the SCE 2000 platform, complete the following steps: Warning Before complet[...]

  • Seite 57

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-17 Replacing the Power Supply Unit Warning Do not mix AC-input and DC-input p ower supply units i n the same SCE 2000 platform . T o install a new power supply into a SCE 2000 platform, complete t[...]

  • Seite 58

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-18 OL-7824-0 4 Reconnecting AC-Input Power Supply Unit The following procedures explain how to reconnect an AC-input power to the SCE 2000 platform. If you are reconnecting DC-input power , proceed to Reconn[...]

  • Seite 59

    Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-19 Reconnecting DC-Input Power Supply Unit The following procedures explain how to reconnect a DC-input power to the SCE 2000 platform. Warning Before completing any of the following steps, and t [...]

  • Seite 60

    Chapter 4 Installation and Maintenance Fan Module Overview Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-20 OL-7824-0 4 Note Use 12 A WG (2.5 mm) copper w ire on ly with hex or loop conn ector s. Ring terminals must be UL approved a nd suita ble for 12 A WG wire. Step 4 Using the number 2 Phillips screwdriver , securely fasten the pro[...]

  • Seite 61

    Chapter 4 Installation and Maintenance Fan Module Overview Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 4-21 ESD Warning Do not remove or install modules without usi ng appropriate anti-static guard m easures. T he SCE 2000 includes an anti-static wrist strap in t he accessory kit. Attach the copper tape strap to an unpainte[...]

  • Seite 62

    Chapter 4 Installation and Maintenance Replacing the Battery Cisco SCE 2000 4xGBE Installation and Configuration Guide 4-22 OL-7824-0 4 Warning When inserting a fan m odule into the SCE 2000 platf orm, do not use unne cessary force; slamming t he fan module int o the chassis c an dama ge the connectors o n the rear of the module. Step 4 Seat the fa[...]

  • Seite 63

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-1 This chapter explains how to connect the SCE 2000 platform to a local console and perform the initial system configuration via the setup wizard that runs automatically . Additionally , this chapter contains instructi ons for cabling the Fast Ethernet Managem ent interfaces. No[...]

  • Seite 64

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Local Cons ole Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-2 OL-7824-04 Setting Up the Local Console This section provides instructions for setting up your local term inal at your workstation, to enable you to perform the initi[...]

  • Seite 65

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-3 Initial System Configuration Upon initial connection to the local terminal, as described above, the system configuration wizard automatically runs to guide [...]

  • Seite 66

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-4 OL-7824-04 Parameter Definition time zone nam e and offset Standard time zone abbreviation and minutes offset from UTC. local time and date Current local time and date[...]

  • Seite 67

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-5 Parameter Definition Authentication Failure trap status Sets the status of the Authentication Failure traps. enterprise traps status Sets th e status of the[...]

  • Seite 68

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-6 OL-7824-04 • Certain groups of related parameters, such as time, date, and SNTP settings, form sub- dialogs or menus within the setup dialog. Y ou may skip an entire[...]

  • Seite 69

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-7 Step 2: Configuring the Hostname The hostname is used to identify the SCE 2000 . It appears as part of the CLI prompt and is also returned as the value of t[...]

  • Seite 70

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-8 OL-7824-04 T o change the passwords, co mplete the following steps: Step 1 The default User password is displayed. • T o accept the display ed value, press Enter . ?[...]

  • Seite 71

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-9 T o configure the time settings, complete the following steps: Step 1 Enter the time settings menu. Would you like to enter the Time settings menu? [no ]: y[...]

  • Seite 72

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-10 OL-7824-0 4 E XA MPL E : Following is a sample time setting dialog. In ad dition to setting the time zone, time and date are changed, and SNTP unicast updates are con[...]

  • Seite 73

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-11 Note that there is no default for this parameter. Step 5 Y ou may configure up to three domain servers. Would you like to add another Name Server? [no]: ?[...]

  • Seite 74

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-12 OL-7824-0 4 E XA MPL E : Following is a sample RDR-formatter configura tion dialog, assigning the IP address and TCP port number . Would you like to enter th e RDR-fo[...]

  • Seite 75

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-13 T a ble 5-2 IP a ddr ess/W ildcar d bit examples Initial IP address Wildcard bits Range 10.1.1.0 0.0. 0.255 10.1.1.0– 10.1.1. 255 10.1.1.0 0.0. 0.63 10.1[...]

  • Seite 76

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-14 OL-7824-0 4 • T o deny access type n and press Enter . Does this entry permit acc ess? [yes]: Step 5 T y pe the IP address to be added to this list, and press Enter[...]

  • Seite 77

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-15 E XA MPL E : This example illustrates a common access control scenario. Let us assume the following: • W e want to permit every station to access the SCE[...]

  • Seite 78

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-16 OL-7824-0 4 Step 8: Configuring SNMP Managing the SCE 2000 is possible also via a Network Management System (NMS) that supports SNMP . By default, SNMP is disabled on[...]

  • Seite 79

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-17 Enter SNMP SET communi ty name: Note that there is no default for this parameter. Step 7 Assign an access list to restrict the SNMP management stations tha[...]

  • Seite 80

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-18 OL-7824-0 4 • T o enable the SCE enterprise traps, ty pe y and press Enter . Enable the SCE enterpr ise traps []: Step 16 T y pe the name of the system administrato[...]

  • Seite 81

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-19 • T ype of deployment — Can be one of the following, depending on the actual deployment: • Single-SCE Platform — a single SCE 2000 is deployed on o[...]

  • Seite 82

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-20 OL-7824-0 4 The procedure described below is a presentation of all the questions in the topology configuration. In actual practice, all questions may not be presen te[...]

  • Seite 83

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-21 • T o specify Operational status after abnormal boot, press Enter . • T o specify Not-Operational status after abnormal boot, t ype 2 and press Enter .[...]

  • Seite 84

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-22 OL-7824-0 4 E XA MPL E #3: Following is a sample topology configuration for a secondary SCE 2000 in a redundant inline topology . In this topology there are two SCE 2[...]

  • Seite 85

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-23 The following errors w ere found: Warning - RDR f ormatter de stination 10.1 .1.1 is not allowed in the IP access-class. Step 3 Y ou are asked whether to a[...]

  • Seite 86

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-24 OL-7824-0 4 Would you like to view the new configura tion before it is appl ied? [yes/no]: n Found errors in the new co nfiguration, w ould you li ke to view them? [y[...]

  • Seite 87

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-25 Connecting the Management Interface The SCE platform is equipped with two RJ- 45 management (MNG) ports. These ports provide access from a remote ma[...]

  • Seite 88

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4xGBE Installation and Configuration Guide 5-26 OL-7824-0 4 connected correctly to the appropriate network element on its second end. T V erifying Management Interface Connectivity If the SCE 2000 platform h[...]

  • Seite 89

    Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 5-27 64 bytes from h ost (10.1.1 .201): icmp_se q=3. time=0 . ms ----10.1.1.201 PIN G Statistics-- -- 4 packets trans mitted, 4 p ackets receive d, 0% pa[...]

  • Seite 90

    [...]

  • Seite 91

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-1 This chapter provides instructions for cabling the Gigabit Ethernet ports for both one and two SCE 2000 topologies, and for configuring Gigabit Ethernet (GBE) interface parameters. In a topology utilizing two SCE 2000 s (cascade), this includes the cascade ports as well as the[...]

  • Seite 92

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-2 OL-7824-04 • T esting Connectivity: Exa mining Link LEDs, GBE Counters (" T esting Connectivity: Examining Link LEDs and Counters " on page 6-9 ) Cabling Diagrams Before [...]

  • Seite 93

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-3 Single Link: Receive-only T opology In this topology , an optical splitter r esides physically on the GBE link that the SCE 2000 should monitor . The optical splitter is c[...]

  • Seite 94

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-4 OL-7824-04 As with the single link cabling, inline topologies require both Receive and T ransmit fibers, while Receive-only systems use only Receive fibers. Note Receive-only topolog[...]

  • Seite 95

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-5 Dual Link: T wo SCE 2000s T opology In this topology , two SCE 2000 s are connected to two full duplex, GBE links, providing full redundancy through cascading the two SCE [...]

  • Seite 96

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-6 OL-7824-04 Inline topologies require connecting both Receive and T ransmit fibers to the SCE 2000 . Cascade ports always require both Receive a nd T ransmit fibers to be conne cted. [...]

  • Seite 97

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-7 Configuring the Gigabit Ethernet Line Interfaces T o configure GBE auto-negotiation for a specifi ed GBE line interface, complete the following steps: Step 1 T o enter the[...]

  • Seite 98

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-8 OL-7824-04 T able 6-1 Fiber Specifica tion s SCE Model Transceiver Transmit Power Receive Power Typical (Max.) Distance SCE 2000 4xGBE MM 850nm M ultimode –9.5 to –4 dBm –17 to[...]

  • Seite 99

    Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-9 T esting Connectivity: Examining Link LEDs and Counters If the SCE 2000 platform has been powered up, test no w to verify that connectivity has been established on all lin[...]

  • Seite 100

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-10 OL-7824-0 4 Again, auto-negotiation for bump-in-the-wire topol ogy may be enabled or disabled. For receive- only topologies, using an external splitter , auto-negotiation must be disabled. T o [...]

  • Seite 101

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-11 Step 2 Connect both SCE 2000 platforms to the management station. (See Connecting the Management Interface (on page 5-25 ).) Step 3 Connect the cascade ports. (See Dual Link: T wo SC[...]

  • Seite 102

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-12 OL-7824-0 4 • Receive-only-cascade • Physically-connected-links — For each of the cascaded SCE 2000 platforms, this parameter defines the number of the link (Link 0 or Link 1) connected t[...]

  • Seite 103

    Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-13 Link Mode The SCE 2000 platform has an internal hardware card used to maintain the links even when the SCE 2000 platform fails. This hardware card has four possible modes of operatio[...]

  • Seite 104

    Chapter 6 Cabling the Line Ports and Completing the Installation Loading and Activating a Service Control Ap plicati on Cisco SCE 2000 4xGBE Installation and Configuration Guide 6-14 OL-7824-0 4 T o set the link mode: From the SCE 2000 (config if)# prompt, type link-mode [ <link>|all-links ] [ forwarding|bypass|sniffing|cutoff ] and press Ent[...]

  • Seite 105

    Chapter 6 Cabling the Line Ports and Completing the Installation Loading and Activating a Service Control Ap plicati on Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 6-15 The detailed procedure of how to perform these ope rations is not specified and described in this manual. For further details, refe r to the following docum[...]

  • Seite 106

    [...]

  • Seite 107

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 7-1 This chapter describes how to start up the SCE 2000 platform, reboot, and shutdown. It also describes how to manage configurations. This chapter contains the following sections: • Starting the SC E 2000 Platform 7-1 • Managing SCE 2000 Configurations 7-4 • Performing Com[...]

  • Seite 108

    Chapter 7 Basic SCE 2000 Platform Operations S tarting the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 7-2 OL-7824-04 Y ou are now ready to start your SCE 2000 platform. Proceed to the section S tarting the System and Observing Initial Conditions (on pa ge 7-2 ). Starting the System and Observing Initial Conditions A[...]

  • Seite 109

    Chapter 7 Basic SCE 2000 Platform Operations S tarting the SCE 2000 Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 7-3 Final T ests The procedures for performing the fi nal tests to verify that the SCE 2000 is func tioning properly are explained in the following sections: • V erifying Operational S tatus (on page 7-[...]

  • Seite 110

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4xGBE Installation and Configuration Guide 7-4 OL-7824-04 Managing SCE 2000 Configurations The procedures for managing SCE 2000 configurations are explained in the foll owing sections: • V iewing Configuration (on page 7-4 ) • Saving the Configuration [...]

  • Seite 111

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 7-5 One of the useful show commands is the show version command. This command displays global static information on the SCE 2000 as software and hardware version, image build tim e, system uptime, last [...]

  • Seite 112

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4xGBE Installation and Configuration Guide 7-6 OL-7824-04 Another useful show command is the show system-uptime command. This command displays information similar to the last line above, which indicates how long the system has been running since the last r[...]

  • Seite 113

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 7-7 #Created on 15: 50:56 CET MON February 11 2002 #cli-type 1 #version 1 clock timezone CET 1 snmp-server com munity “pub lic” ro snmp-server hos t 10.1.1.25 3 traps versio n 1 “public ” interf[...]

  • Seite 114

    Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4xGBE Installation and Configuration Guide 7-8 OL-7824-04 Recovering a Previous Configuration When you save a new configuration, the system automatically backs up the old configuration in the directory tffs0:system/prevconf/ . Up to nine versions of the st[...]

  • Seite 115

    Chapter 7 Basic SCE 2000 Platform Operations Performing Complex Configur ations Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 7-9 Performing Complex Configurations After you have installed your SCE 2000 platform hardware, checked all external connections, turned on the system power , allowed the sy stem to boot up, and perfor[...]

  • Seite 116

    Chapter 7 Basic SCE 2000 Platform Operations Rebooting and Shutting Do wn the SCE Platform Cisco SCE 2000 4xGBE Installation and Configuration Guide 7-10 OL-7824-0 4 Shutting Down the SCE Platform Shutting down the SCE 2000 platform is required before turnin g the power off. This helps to ensure that non-volatile memory devices in the SCE 2000 plat[...]

  • Seite 117

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-1 Y our SCE 2000 platform went through extensive testing before leaving the factory . However , if you encounter problems starting it, use the information in this chapter to help isolate the cause of the problems. The procedures in this chapte r assume that you are troubleshooti[...]

  • Seite 118

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-2 OL-7824-04 The following table shows the general troubleshooting strategy described in th is chapter . Refer to this table, as necessary , to follo w the steps to isolate problems to a specific subsystem and resolve the problem if possib[...]

  • Seite 119

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-3 CLI Commands for T r oubleshooting Use the following commands to provide informati on to help you troubleshoot i nstallation of your SCE 2000 platform. Refer to Cisco Service Contr ol Engine (SCE) Softwar e Configuration Guide[...]

  • Seite 120

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-4 OL-7824-04 show telnet status Telnet deamon i s enabled. • show line vty timeout — Shows the timeout configured for T elnet sessions. Following is a sample output from the show line vt y timeout command. Timeout is 30 m inutes • T [...]

  • Seite 121

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-5 • V iewing/clearing the User Log counters Copying the User Log Y ou can view the log file by copying it to an external source or to disk. This command copies both log files to the local SCE 2000 platform disk or any external[...]

  • Seite 122

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-6 OL-7824-04 Clearing the User Log Y ou can clear the contents of the user log at any time. The user log contains important information regarding the functioning of the system. It is recommended that a copy be made before the log is cleare[...]

  • Seite 123

    Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-7 prompt. Generating a File for T echnical Support In order for technical support to be most ef fective, the user should provide them with the information contained in the system logs. Use the logger get support-file command to [...]

  • Seite 124

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-8 OL-7824-04 SCE 2000 Operational Status Description Status LED State Warning SCE 2000 is fully operational (as above) but one of t he following occurred: • Line ports (GB E ports) to the link a re down • Manageme[...]

  • Seite 125

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-9 • When all LEDs come on to indicate that th e system has booted successfully , the initial system banner should be displayed on the console screen. If it is not displa yed, see Connecting the Local Cons[...]

  • Seite 126

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-10 OL-7824-0 4 T a ble 8-3 T roubleshootin g the P ower Subsystem Symptom Possible Cause Possible Solution Power LED on the front panel and LED s on the power sup ply unit a re not lit, or do n ot remain lit continuou[...]

  • Seite 127

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-11 T roubleshooting the Firmware Package Installation Check the following to help isolate a problem in the installation of the firmware package. Problems related to the installation of the firm ware package[...]

  • Seite 128

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-12 OL-7824-0 4 T roubleshooting the Management Subsystem Check the following to help isolate a problem in the management subsystem. Problems in the management subsystem could be any of the following: • Management li[...]

  • Seite 129

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-13 CLI comman d show access-lists An ACL m ay be assigned that denies e ntry. See Initial System Configuratio n (on page 5-3 ) Refer to " Access Control Lis ts " in the Cisco Service Control E ngi[...]

  • Seite 130

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide 8-14 OL-7824-0 4 Telnet connection terminates automatically CLI comman ds : • show line • show line vty timeout Telnet connection may be timing out . Reconfigure lin e timeout. timeout <time in seconds> T roub[...]

  • Seite 131

    Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 8-15 CLI comman ds : show interface GigabitEthernet 0/# counters Check output of this command for : “In good unicast packet” and “Out unicast packet”. These counters should be co nstantly incrementing[...]

  • Seite 132

    [...]

  • Seite 133

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 A-1 The SCE 2000 platform External Optical Bypass module preserves the service provider GBE links in case of complete power failure of the SCE 2000 platform, or for implementing a maintenance window . The SCE 2000 platform state-of-the-art Service Control platform is being deploye[...]

  • Seite 134

    Appendix A The External Optical Bypass Module External Optical Byp ass Functionality Cisco SCE 2000 4xGBE Installation and Configuration Guide A-2 OL-7824-04 External Optical Bypass Functionality The External Optical Bypass module is connected bu mp-in-the-wire in the GBE link. It is then connected to the SCE 2000 platform with two types of connect[...]

  • Seite 135

    Appendix A The External Optical Bypass Module The External Optical Bypass Module Front Pane l Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 A-3 The External Optical Bypass Module Front Panel The front panel of the External Optical bypass module contains the following com ponents: • SUB Rx/Tx — GBE port that connects to th[...]

  • Seite 136

    Appendix A The External Optical Bypass Module Installing the External Bypass Module Cisco SCE 2000 4xGBE Installation and Configuration Guide A-4 OL-7824-04 Installing the Module in a Rack The following procedure describes how to install the module in the rack. Note that, although each module is shipped with its own mounting panel, it is not necess[...]

  • Seite 137

    Appendix A The External Optical Bypass Module Installing the External Bypass Module Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 A-5 • Connect the control cable to the Bypass 2 9-pin D-T ype connector on the rear panel of the SCE 2000 platform. Figure A-4: Bypass Connectors o n the Rear of the SCE 20 00 The following figur[...]

  • Seite 138

    Appendix A The External Optical Bypass Module Installing the External Bypass Module Cisco SCE 2000 4xGBE Installation and Configuration Guide A-6 OL-7824-04 Warning Auto-Negotiation shou ld be configured identically for the two SCE 2000 platform GBE interfaces and the GBE interfaces of the switch/ro uter on either side of the External Optical Bypas[...]

  • Seite 139

    Appendix A The External Optical Bypass Module S pecificati ons Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 A-7 Specifications Item Value Optical Connectors SC Switching Spe ed 15 ms max Operating Wav e l e ngt h • Multi Mode: 850 nm • Single Mode: 13 1 0 nm Operating Tem perature -10° C t o +65° C ( 14° F to 14 9° F[...]

  • Seite 140

    [...]

  • Seite 141

    Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 I-1 A Airflow • 4-3 Attaching a Chassis Ground Connection • 4- 10 Attaching the Brackets to the SCE 2000 • 4- 7 Attaching the Crossrail Supports to the Rack • 4-8 Audience • v B Back Panel • 2-4 Basic SCE 2000 Platform Operations • 7-1 Bypass Mechanism • 3-3 C Cabl[...]

  • Seite 142

    Index Cisco SCE 2000 4xGBE Installation and Configuration Guide I-2 OL-7824-04 Front Panel • 2-2 Functionality • 3-2 G Generating a File for Technical Support • 8- 7 I Identifying Startup Problems • 8-8 Initial System Configuration • 5-3 Installation and Maintenance • 4-1 Installation Precautions • 4-5 Installing a Cascaded System •[...]

  • Seite 143

    Index Cisco SCE 2000 4xGBE Installation and Configuration Guide OL-7824-04 I-3 SCE 2000 Operational Status • 8-7 Service Configuration Management • 1-5 Service Control and the SCE Platform • 2-1 Service Control for Broadband Service Providers • 1-2 Setting Up the Local Console • 5-2 Setup Command Parameters • 5-3 Shutting Down the SCE P[...]