Cisco Cisco 12416 Bedienungsanleitung

Y ou'll be entered into a quarterly drawing for free Cisco Press books by returning this su rvey! Cisco is dedicated to customer satisfaction and would like to hear your thoughts on these prin ted manuals. Please visit the Ci sco Product Comments on-line sur vey at www .cisco.com/go/crc to submit your comments about accessing Cisco technical m[...]

BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 4631 SAN JOSE CA POSTAGE WILL BE PAID BY ADDRESSEE NO POST A GE NECESSAR Y IF MAILED IN THE UNITED ST A TES DOCUMENT RESOURCE CONNECTION CISCO SYSTEMS INC 170 WEST TASMAN DR SAN JOSE CA 95134-9916[...]

Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Cisco 1 20 1 6, Cisco 1 241 6, and Cisco 1 281 6 Router Installation and Conf iguration Guide Text Part Number: OL-11495-01[...]

THE SPECIFICA T IONS AND INFORM A TION REGARDIN G THE PRODUCTS IN THIS MAN U AL ARE SUBJECT TO CHANGE WITHOUT NO TICE. ALL ST A TEMENTS, INFORMA TION, AND RECOMMENDA TION S IN THIS MANU AL A RE BELIEVED TO BE A CCURA TE BUT ARE PRESENTED WITHOUT W ARRAN TY OF ANY KIN D, EXPRESS OR IMPLIED. USERS M UST T A KE FULL RESPON SIBILITY FOR THEIR APPLICA T[...]

xiii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Audience The Cisco 12016, Cisco 12416 , and Cisco 12816 Router Installatio n and Conf igur ation Guide is written for hardware instal lers and system administrators of Cisco routers. This publication assumes t hat the user has a [...]

About This Guide Document Organiza tion xiv Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Document Organization This installation and conf iguration guide is org anized into th e follo wing chapters and appendix es: • Chapter 1, “Product Overvie w , ” provides an introd uction to the major [...]

xv Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Document Co nventions Document Conventions This publicati on uses the follo wing con vention s: • Ctrl represents the key labeled Cont r ol . Fo r example, the ke y combination Ctrl-Z means hold do wn the Control k ey whi le you [...]

About This Guide Obtaining Documentation xvi Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 T imesaver Means the described action saves time . Y ou can sav e time by performin g the action described in the paragr aph. War n in g This warning symbol means danger . Y ou are in a situation tha t coul[...]

xvii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Obtaining Documentation Product Documentation DVD Cisco documentation and add itional lite rature are a vailable in the Product Documentation D V D package, whi ch may ha ve shi pped with your p roduct. The Product Documentation [...]

About This Guide Documentation Fee dback xviii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Instructions for ordering documentat ion using the Order ing tool are at this UR L: http://www .cisco .com/uni vercd/cc/td/ doc/es_inpck/pdi.htm • Nonre gistered Cisco .com users can order document [...]

xix Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Cisco Product Secu rity Overview A current list of security ad visories and not ices for Cisco produc ts is av ailabl e at this UR L: http://www .cisco.co m/go/psirt If you prefer to see advisories and notices as they are updated [...]

About This Guide Obtaining Technical Assistance xx Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The link on this pag e has the current PGP k ey ID in use. Obtaining Technical Assistance Cisco T echnical Support pro vides 24-hour-a-day a ward-winning technical assistance. The Cisco T echnical Sup[...]

xxi Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Obtaining Te chnical Assistance Submitting a Service Request Using the online T A C Service Request T ool is the f astest way to open S3 and S4 service requests. (S3 and S4 servi ce requests are t hose in which your net work is mi[...]

About This Guide Obtaining Additional Publ icat ions and Information xxii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Se verity 3 (S3)—Oper ational perf ormance of your netw ork is impaired, b ut most b usiness operations remain functi onal . Y ou and Cisco wi ll commit resourc es during norm[...]

xxiii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Obtaining Additional Public ations and Information solv e them, using real-w orld case studies and b usiness strategies to help readers make sound technology in ves tment decisions. Y ou can acc ess iQ Magazine at this URL: http[...]

About This Guide Obtaining Additional Publ icat ions and Information xxiv Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01[...]

iii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 CONTENTS About This Guide xiii Audience xiii Purpose xiii Document Organization xiv Document Conventio ns xv Obtaining Documentation xvi Cisco.com xvi Product Documentation DVD xvii Ordering Documentation xvii Documentation Feedb ack xviii Cisco P[...]

Contents iv Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC Power Supplies 1-10 DC Power Shelf 1-12 DC Power Supplies 1-15 Chassis Card Cages 1-17 Upper Card Cage 1-17 Lower Card Cage 1-18 Switch Fabric Card Cage 1-18 Switch Fabric Overview 1-19 Switch Fabric Card Functionality 1-19 Clock Schedu[...]

v Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents PRP Reset Switch 1-37 PRP Alphanumeric Message Displays 1-38 PRP Memory Components 1-39 PRP SDRAM 1-41 PRP SRAM 1-41 PRP NVRAM 1-42 PRP Flash Memory 1-42 Upper and Lower Cable Manag ement Brackets 1-43 Blower Module 1-44 CHAPTER 2 Preparing[...]

Contents vi Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Site Wiring Guidelines 2-24 GRP Port Connection Guidelines 2-25 GRP Auxiliary and Console Port Con nections 2-26 GRP Auxiliary Port Signals 2-27 GRP Console Port Signals 2-28 GRP Ethernet Port Connections 2-29 GRP RJ-45 Et hernet Conne cti[...]

vii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents Connecting to th e Front Grounding Receptacle 3-22 Connecting to th e Top Rear Receptacle 3-24 Attaching the Vertical Cable-Management Trough 3-25 Connecting Line Ca rd Network Interface Cables 3-27 Connecting GRP Route Pro cessor Cables [...]

Contents viii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Booting from the Cisco IOS Software Image 4-12 Configuring the Router 4-14 Cisco IOS User Interface 4-15 Cisco IOS User Interface Com mand Modes 4-15 User EXEC Mode 4-16 Privileged EXEC Mode 4-16 Global Configuration Mo de 4-17 Using Set[...]

ix Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents squeeze Command 4-51 Booting from Flash Memory 4-52 Copying Image Files to or From Flash Memo ry 4-52 Copying a Cisco IOS Software Image into a Flash Me mory Card 4-54 Copying Cisco IOS Software Images Between Flash Me mory Cards 4-56 Copy[...]

Contents x Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Analyzing the Data 5-30 crc16 Output 5-30 Grant Parity and Request Errors 5-33 Properly Seating Switch Fabric Cards 5-35 Troubleshooting the Cooling Su bsystem 5-36 Blower Module Ope ration 5-38 Power Supply Operation 5-38 Overtemperature C[...]

xi Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents Removing and Installing the Front Covers and Bezel Extende rs on Original Cisco 12000 Series Routers 7-3 Removing the F ront Covers 7-3 Installing the Front Covers 7-4 Attaching Bezel Extenders to the Front Cover 7-6 Removing and Replacing[...]

Contents xii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing Cards from the Chass is 7-79 Removing and Replacing RP and Line Cards from the Upp er and Lower Card Cages 7-79 Removing and Replacing an Alarm Card 7-81 Removing and Replacing Switc h Fabric Cards 7-84 Upgrading th[...]

CH A P T E R 1-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 1 Product Overview This chap ter pro vides an o vervie w of the Cisco 1201 6, Cisco 12416, an d Cisco 12816 series routers. It contains ph ysical descriptions of the rout er hardware and major components, as well as functional descrip[...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Physical and Functional Description of Router The Cisco 12000 series router chassis is a sheet-metal enclosure that houses router components. The major compon ents consist [...]

1-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figur e 1 -1 Cisco 120 16 Ser ies Router Com ponents—F ront V iew Switch f abr ic card cage (behind filter door) P W R O K F A U L T T E M P I L I M P W R O K F A U L T T[...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC and DC Power Subsystems A router ships wi th either an A C or D C po wered syste m. Source power connects to the power shelf at the back of the chassis which route po we[...]

1-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figur e 1 -2 Standa rd A C-Input P ow e r Subsystem —200 0 W Caution A router equipped with the stand ard A C po wer subsystem must be operated with three po wer supplies[...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 A C po wer to the rout er is pro vided through po wer cords connected f rom A C power outlets to connectors on back of the po wer shelf as sho w n in Figure 1-3 . Figur e 1[...]

1-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Optional AC Power Shelf The po wer subsystem consists of a double-le vel A C-input po wer shelf with bays for 4 A C-input po wer supplies. Figure 1-4 sho ws the optional po[...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -4 Optional A C-Input P ow er Subsystem—2000 W Caution A router equipped with the optional A C power subsyst em must be operated with 4 po wer supplies installe[...]

1-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter A C po wer to the rout er is pro vided through po wer cords connected f rom A C po wer outlets to the connec tors on the back of the po wer shelf as shown in Figure 1-5 . F[...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC Power Supplies Each A C PEM con verts 200 to 24 0 V A C into -48 VDC, which is distrib uted through the chassis backpl ane to all cards, RPs, and the blower modules. Fi[...]

1-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figure 1-7 identif ies the components of a 2500 W A C power supply . Figur e 1 -7 250 0 W AC P ow er Supply Co mponents The status LEDs on an A C PEM provide in formation [...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • ILMI (yello w)—Indicates the PEM is operating in a current-limitin g condition. For add itional inf ormation about troubl eshooting A C PEMs, see the “T roubleshoo[...]

1-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figur e 1 -8 DC-Input P ow er Shelf—200 0 Wa t t s Caution A router conf igured for source DC operation must be operated with 4 DC-input PEMs installed at all times for [...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -9 DC-Input P owe r Shelf Connections A1- A1+ A2- A2+ B2+ B2- B1+ B1- Ground B1 Cov er with slotted screw hole; f astens to standoff in middle of cable connectio[...]

1-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter DC Power Supplies Each DC PEM operates from a nominal so urce DC voltage of –48 t o –60 VDC and requires a de dicated 60 amp se rvice. Figure 1-10 identif ies the comp[...]

Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figure 1-11 identif ies the components of a 2400 W DC po wer supply . Figur e 1 -1 1 240 0 W DC P ow er Supply Co mponen ts The status LEDs on a DC PEM provide information[...]

1-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Chassis Card Cages For add itional informati on about troubl eshooting DC PEMs, see the “T roub leshooting th e DC-Input Power Subsystem” section on page 5-10 . Chassis Card Cages There are three integral card cages[...]

Chapter 1 Product Overview Chassis Card Cages 1-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Lower Card Cage The lower card cage also has eight user -con figurable slots th at support add itional line cards, an alarm card, and an optional, redundant RP . Note The lower card cage is an in vert[...]

1-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Switch Fabric Overview Switch Fabric Overview The switch fabric provides synchronized gigabit-speed connections between line cards and the RP . The switch fabric card cage is located behind th e air filter door and cons[...]

Chapter 1 Product Overview Switch Fabric Overview 1-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The router also ships with a blank switch fabric card installed in the far left (non-work ing) slot of the switch f abric card cage. The blank f iller panel balances the air flo w through the swit[...]

1-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Alarm Card, Line Card, and Rout Processor Overview This sectio n provides general informatio n about alarm card s, line cards an d types of route processo rs in stalled[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Some of the f unctions that the alarm cards pro vide are: • Supplies +5 VDC to the MBus modules on rou ter components (see AC a n d DC Po wer Subsystems, page 1-4 ). [...]

1-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Figur e 1 -12 Alar m Card Components and LEDs Line Cards Up to 15 Cisco 12000 series line card s ca n be instal led in the rout ers upper and lo wer card cages to suppo[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Route Processor Selection T wo types of RPs are a v ailable: a Gigabit Route Processor (GRP) or a Performance Route Processor (PRP). The GR P is the route processor tha[...]

1-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Figur e 1 -13 Giga bit Rout e Pr ocessor Fr ont P anel GRP PCMCIA Card Slot s and Status LEDs T wo PCMCIA card slots ( slot 0 and slot 1) p rovide the GRP with addition[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -14 Slot A ctivity LEDs—F r ont Pa nel 129254 SLO T -0 SLO T -1 RESET AU X EJECT[...]

1-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview GRP Reset Switch Access to th e (soft) r eset switch is through a sm all openi ng in the GRP f ront pane l. T o press the switch, insert a paper clip or simil ar small [...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Auxiliary and Console Ports The auxiliary and co nsole ports on t he GRP are EIA/TIA-23 2 (also kno wn as RS-232) asynchronous serial ports. Thes e ports connect ex[...]

1-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview The transmission speed of the Ethernet po rt is not user -configurable. Y ou set the speed through an au tosensing scheme on th e GRP which is determined b y the networ[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Alphanumeric Message Displays The alphanumeric message displays are or ganized in two r ows of four LED characters ( Figure 1-16 ). Figur e 1 -16 Alphanumer ic Mess[...]

1-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview GRP Memory Components This section describes v arious types of memory used on the GRP to support router functions. Ta b l e 1-1 provides a quick reference of the dif f [...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -1 7 GRP Memory Lo cations S LO T -0 GIGABIT ROUTE PR OCESSOR S LO T -1 C O LL LIN K TX R X R J-45 M II R E S E T AUX E JE C T 129255 Bank 2 DRAM DIMMs Bank 1[...]

1-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview GRP DRAM The GRP uses Extended Data-Out (EDO) Dynamic Rand om Access Memory (DRAM) to stor e routing tables, protocols, net work account ing applications, and to run Ci[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Flash Memory Use flash memory to sto re multiple Cisco IOS software and mi crocode images that you can use to operate the router . Y ou can do wnload ne w images to[...]

1-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP PCMCIA Card Slots and Status LEDs T wo PCMCIA card slots (slot 0 and slot 1) pro vide the PRP w ith additional flash memory capacity . All combinations of dif feren[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The follo wing LEDs on the front pan el indi cate traf f ic status and port selection ( Figure 1-19 ): • LINK, EN, TX, RX—Ind icate link acti vity (LINK), po rt ena[...]

1-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP Reset Switch Access to the (soft) reset switch is throug h a small open ing in the PRP front panel (see Figure 1-18 ). T o press the switch, insert a paper clip or [...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Alphanumeric Message Displays The alphanumeric message displays are or ganized in two r ows of four LED characters each ( Figure 1-20 ). Figur e 1 -20 Alph anumer i[...]

1-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP Memory Components This section describes v arious types of memory used on the PRP to suppor t router functions. Ta b l e 1-3 provides a quick reference of the dif f[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -21 PRP Me mory Locati ons EJE C T RX TX P R IM A R Y SLOT -1 SLOT -0 LINK EN RX TX ETH 1 ETH 0 AUX CONSOLE PERFORMANCE ROUTE PROCESSOR 1 (PRP-1) LINK P R IM [...]

1-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP SDRAM The PRP uses Error Checking and Correctio n (ECC) Synchronized Dynamic Random Access Memory (SDRAM) to store ro uting tables, protocols, netw ork accounting a[...]

Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP NVRAM Non-v olatile Random Access Memory (NVRAM) provides 2 MB of memory for system conf iguration fi les, software re gister settings, and en vironmental monitorin[...]

1-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Upper and Lower Cable Management Brackets Cisco 12010, Cisco 12410 , and Cisco 12810 series routers incl ude upper and lo wer cable management brackets that work tog et[...]

Chapter 1 Product Overview Blower Module 1-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Blower Module The router has two blo wer modules to distri b ute air within the chassis. One blo wer module is located above the upper card cage ; the s econd blo w er module is located below the lo wer ca[...]

1-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Blower Module Figur e 1- 2 3 C o o l i n g A i r F l o w T o ensure that th ere is adequate air flo w to pre vent ov erheating inside the card cages keep the front and back of the rout er uno bstructed. W e recommend at[...]

Chapter 1 Product Overview Blower Module 1-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Caution Y ou should inspect an d clean the air f ilter one time per month (more often in dusty en vironments). Do not operate the rout er without an air f ilter installed. The blo wer module controll er ca[...]

CH A P T E R 2-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 2 Preparing for Installation Before installing your rout er , consider po wer and cabling requir ements that must be in place at your inst allation si te, sp ecial equipment for ins talling the router , and the en vironmental conditio[...]

Chapter 2 Prep aring for Installation Safety Guidelines 2-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Safety Guidelines Before you perform an y procedure in this public ation, re view the safety guidelines in th is section to a void injurin g yourself or damaging the equi pment. In addition ,[...]

2-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Safety Guidelines Safety with Electricity • The installation shall be in compliance with national and local electrical codes: in the United States, National Fire Protection Association (NFP A) 70, United Stat[...]

Chapter 2 Prep aring for Installation Safety Guidelines 2-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Preventing Electrostatic Discharge Damage Many router components can b e damaged b y static electricity . Not ex ercising the proper electrostatic dischar ge (ESD) precautions can result in i[...]

2-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Safety Guidelines Figur e 2-1 Connectin g an ESD-Pr eventive Str ap to the Router Chassis ALARM ENABLED FAIL ACO/LT ALARM CSC 0 FAIL 1 0 1 2 ENABLED CRITICAL MAJOR MINOR SFC A C T I V E 0 C A R R I E R R X P K [...]

Chapter 2 Prep aring for Installation Safety Guidelines 2-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Lifting Guidelines A fully conf igured router can weigh as much as 275 pounds (lb ) (124.74 kilo grams (kg)), whi le an empty chassi s weighs 125 lb (56.7 kg). These systems are not intended [...]

2-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Laser Safety Some line cards are equipped w ith ports that can emit h azardous laser radiation from the ap erture when th ere is no ca ble connected to the po rt. This in visible ra[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 2-2 Equ ipment Rac k T ypes Enclosed Rack Figure 2-2 a sho ws a free-standing, en closed rack with two mou nting posts in the front. The router shoul d not be installed in t[...]

2-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Telco Rack Figure 2-2 c sho ws a telco-type rack. The telco-type rack is an open frame consisting of two posts tied togeth er by a cross-b ar at the top and a floor stan d at the bo[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 2-3 F ront-Mou nted an d Cent er -Mount ed Installation in a T elco Rac k 27958 F ront-mounted chassis in telco rac k Center-mounted chassis in telco rac k F ront-mount rai[...]

2-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Site Layout and Equipment Dimensions T o help maintain troub le-free operation, adhere to the follo w ing precautions when planning you r rack installati on: • Ensure the site of[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Install the cable-management brackets incl uded with the route r to keep cables organized. Be sure to: – Use appropriate strain-relief m ethods to protect cables and equi pme[...]

2-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Figur e 2-4 Router Chassis Footpr int and D imensions—T op View) 17.3 in. 18.75 in. Plastic front cov er 2 in. 2.75 in. 20 in. F ront Back V er tical rac k-mounting flange (each [...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figure 2-5 sho ws the footprint and outer dimensions of the enhanced version of router chassis. Figur e 2-5 Enhan ced Rout er Chassis F ootpr int and Dimensions—T op V iew 25.694[...]

2-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Air Flow Guidelines Cool air is circulated through the rout er chassis by two blo wer modules. The blo wer modules maintain acceptable operating temper atures for the internal comp[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 2-6 Air Flo w P ath through the Router - Side View 26204 Air e xhaust Upper card cage Room air Bottom blo wer module Air filter Air e xhaust P ow er supply shelf Middle car[...]

2-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Temperature and Humidity Guidelines The operating and nonoperating en vironmen tal site requirements are list ed in Ta b l e A-4 on page A-4 . The router no rmally operates withi n[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC-Powered Routers A C PEMs operate in the nominal range of 200 VA C t o 2 4 0 V A C and require a minimum service of: • 20 A for operation in North America • 16 A for internat[...]

2-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Ta b l e 2-1 lists po wer cord options. All A C-input po wer supply pow er cords measure 14 feet (4.3 m). DC-Powered Routers Connectio ns to DC PEMs are rated at 60 a mps maxim um.[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Y ou must terminate DC power cables usin g cable lugs at the po w er shelf end. Ensure the lug s are dual -hole and th at the y are able to fit over M6 termin al studs at 0.625-inc[...]

2-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Figur e 2-9 T ypical Sour ce DC P ow er Cabling Scheme fo r P ow e r Shelf Ba y B1 27963 Ground – + Ground – + Rectifiers AC Batteries Central office ground CO ground Plant con[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Caution DC PEMs contains circui try to trip th e breaker on the PEM if the P EM detects a re verse polarity conditi on. No damage sho uld occur from re verse polarity , b ut you sh[...]

2-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Figur e 2-1 0 Rout er Bonding and Ground ing Receptacles—T op Rear Figur e 2-1 1 Router Bonding and Grounding Recept acles—Fr ont 29183 Supplemental bonding and grounding recep[...]

Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 T o ensure a satisfactory supplemental ground connection to th e router , use the follo wing parts: Note These parts are not av ailable from Cisc o, but are a vai lable from commer[...]

2-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines Site wiring is unlik ely to emit radio inte rference if you use twisted-pair cable with a good distrib ution of grounding conductors. Use a high-qu ality twisted-pair cab le wit[...]

Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Auxiliary and Console Port Connections The GRP has two EIA/TIA-232 ports ( Figure 2-12 ): • Auxiliary por t— DB-25 plug, DTE-mode port for connecting a mo dem or other D[...]

2-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines Caution T o maintain Class B EMI compliance, you must use shielded cables when connecting to the auxiliar y and console ports of or iginal GRPs (part nu mbers GRP= and GRP-B=). [...]

Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Console Port Signals The GRP console port is a DB-25 DCE in terface for connecting a DTE terminal de vice to the router . Both Data Set Ready (DSR) and Data Carrier Detect ([...]

2-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines GRP Ethernet Port Connections The GRP has the follo wing two ty pes of Ethernet connections ( Figure 2-13 ): • RJ-45 media-dependent interface (MDI) • 40-pin, D-shell type m[...]

Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The GRP Ethernet port does no t prov ide ex ternal routing fu nctions. Its primary roles are to act as a T elnet port into the router , and to boot or ac cess Cisco IOS software[...]

2-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines GRP RJ-45 Ethernet Connections The RJ-45 Ethernet connecti on does not require an external tr anscei ver . Figure 2-15 sho ws the pin orientation of the RJ-45 Ether net port and[...]

Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 When connecting the RJ-45 port to a hub or rep eater , use the straight-through cable pinout sho wn in Figure 2-16 . Figur e 2-16 Straight-T hrough Ether net Cabl e Pinout When [...]

2-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines GRP MII Ethernet Connections The GRP MII Ethernet connection requires an external physical sublayer (PHY) and an external transceiv er that pe rm its connection to mult imode f [...]

Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Ta b l e 2-5 lists the signals used on the MII connector . Ta b l e 2-5 GRP M II Ethernet Pinout Pin 1 1 . Pi ns not listed in the table are not used. In Out Input/ Output Descr[...]

2-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines Ta b l e 2-6 lists the cablin g specif ications for 100-Mbps tr ansmission o ver unshielded twisted-pair (UTP) cables. Ta b l e 2-7 lists IEEE 802.3u physical characteristi cs f[...]

Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Port Connection Guidelines This section con tains detailed cabling an d signal information for all interf ace and port connections to the PRP . It also prov ides informat io[...]

2-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines Figur e 2-1 9 PRP A uxiliary and Consol e P ort C onnection s 1 Modem 4 Auxil iary port 2 Console terminal 5 Console port 3 RJ-45 cables 70692 R X T X PRIMARY S L O T -1 S L O T[...]

Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Auxiliary Port Signals The PRP auxiliary port is a DTE, RJ-45 interface for connectin g a modem or other DCE de vice (such as a CSU/DSU or another ro uter) to the PRP . The [...]

2-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines PRP Console Port Signals The PRP console port is a DCE RJ-45 interf ace for connecting a terminal to the router . The console port does not supp ort modem control o r hardware f[...]

Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Ethernet Connections The PRP has two RJ-45 MDI Ethe rnet ports; ETH0 and ETH1 ( Figure 2-20 ). Figur e 2-20 PRP Ether net Connections These connections support IEEE 802.3 an[...]

2-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines Figure 2-21 sho ws: • Y ou cannot access Netw ork 2.0.0.0 from Ethernet port (E0) on the GRP in Router A. Y ou can onl y access Host A, Host B, an d Router C, whi ch are in Ne[...]

Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP RJ-45 Ethernet Connections The RJ-45 Ethernet connecti on does not require an external tr anscei ver . Figure 2-22 sho ws the pin orientation of the RJ-45 Ether net port and[...]

2-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines When connecting the RJ-45 port to a hub or rep eater , use the straight-through cable pinout sho wn in Figure 2-23 . Figur e 2-23 Straight-Thr ough Cable Pinout t o Hub or Repea[...]

Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Ta b l e 2-11 lists the cabli ng specif ications for 100-Mbps transmission o ve r unshielded twisted-pair (UTP) cables. Note The transmission speed of the Ethernet port s is aut[...]

2-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Alarm Card Connectio n Guidelines Alarm Card Connection Guidelines The router is equipped with two al arm cards: • One alar m card occupi es the dedicated f ar le ft slot in the upper card cage • The secon[...]

Chapter 2 Prep aring for Installation Alarm Card Connectio n Guidelines 2-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note T o comply with the in trab uilding ligh tning sur ge requirements of GR-1089-CORE, Issue II, Revision 01, February 1999, you must use a shielded cable when connecting t[...]

CH A P T E R 3-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 3 Installing the Router This chapter contains the proc edures to install th e router in a rack. The installatio n is presented in th e follo wing sections: • Pre-Installation Co nsideration s and Requiremen ts, page 3-2 • Rack-Mou[...]

Chapter 3 In stalling the Router Pre-Installation Consideration s and Requirements 3-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Pre-Installation Considerations and Requirements Before you perfor m any pr ocedures in this chapt er , re view the follo wing sections in Chapter 2, “Preparing f[...]

3-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Pre-Installation Consider a tions and Requirements Required Tools and Equipment Before you be gin the rack-mount installation, you must read and understand the informat ion in the “Rack-Mounting Guidelines” sect[...]

Chapter 3 In stalling the Router Pre-Installation Consideration s and Requirements 3-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing the Front Covers from Cisco 12016 Original Series Routers The chassis front co vers for t he po wer sh elf and u pper blo wer module, upper card cage, lo w[...]

3-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Pre-Installation Consider a tions and Requirements Figur e 3-1 Rout er Chassis F ront Co vers 1 Ball stud 2 Ball stud clip P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I L I M P W R O K F A U L T [...]

Chapter 3 In stalling the Router Pre-Installation Consideration s and Requirements 3-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing the Front Cover from Cisco 12016 Enhanced Series Routers The ne w cover on the Cisco enhanced series of routers has a tw o-piece front co ver . The cov ers[...]

3-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Pre-Installation Consider a tions and Requirements Figur e 3-2 Removing the F ront Co v ers 1 Release b uttons P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I L [...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Rack-Mounting the Router Chassis The router chassis can be installed in either a front-mounted position or a center -mounted position. • In a front-mo unted positi on, the chassi[...]

3-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Figur e 3-3 V er ifying Equipment Rack Dimensions Installing Center-Mount Brackets—Optional If you plan to install t he router in th e center -mount position, you mu st install the[...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Determine the location in which you want to position the chassi s in the rack, and mark holes at the same height on both the left and right rack rails. Step 2 Identi fy the[...]

3-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis b. Finger -tighten a second scre w in the top hole of the bracket. c. Finger -tighten three more scre ws in the middle of in the bracket. d. Use a screwdri ver to tighten all f i ve[...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-5 Installi ng a Cent er -Moun t Rac k-Mounting Br ack et 28450 Rack Chassis Chassis rac k-mounting rail Brac ket Brac ket Open hole (screw inserted through) Threaded hol[...]

3-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Installing the Chassis Rack-Mounting Platform The rack-mounting plat form is installed at the bo ttom of an empty rack and acts as a permanent support platfo rm for the chassis. It [...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Repeat these steps to at tach a brack et in the same position on the oth er side of the platform. Step 4 Align the platform between the rack p osts and set it in positi on so that[...]

3-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Unpack and Position the Router Unpack the router follo win g the instructions in the Cisco 12016, Cisco 12416 , and Cisco 12816 Router Unpac king Instructions that came with the rou[...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Installing the Chassis into the Rack Use the fo llowing procedure to i nstall the c hassis in th e rack. Step 1 Rotate the scisso r-j ack scre w counterclockwise slow ly and e xpa[...]

3-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Step 2 Remo ve the fou r bolts and chassis anchor c lips that secure the base of the chassis to the scissor-jack platform ( Figur e 3-9 ). Figur e 3-9 Removing the Chassis Anchor Cl[...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Grasp the hand le on the back pa nel of th e c hassis to carefully pull the chassis off of the s cissor -jack platform and ont o the rack-mo unting pl atform wh ile a secon[...]

3-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Step 4 Insert the chassis in to the rack until th e chassis rack-mounting flanges ar e flush against the mounting flanges on the rack (or the optional center-mount brackets, if inst[...]

Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-1 1 Chassis R ack -Mounting Ho le Gr oups 26864 Chassis mounting holes group E Chassis mounting holes group D Chassis mounting holes group C Chassis mounting holes group[...]

3-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Supplemental Bon ding and Grounding Co nnections Supplemental Bonding and Grounding Connections Before you co nnect po wer to the router , or p ower on the router for the f irst time, we recommend that you conn ect[...]

Chapter 3 In stalling the Router Supplemental B onding and G rounding Connec tions 3-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting to the Front Grounding Receptacle Use the follo wing procedure to connect the supplemental gro unding cable to front grounding receptacle. Step 1 Loosen[...]

3-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Supplemental Bon ding and Grounding Co nnections Step 2 Attach the grounding ca ble to the chassis ( Figure 3-13 ): a. Insert two M6 bolts through the grounding h oles in the chassis. b. Place the cable lug o ver t[...]

Chapter 3 In stalling the Router Supplemental B onding and G rounding Connec tions 3-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting to the Top Rear Receptacle Use the follo wing procedure to connect the supplemental groundin g cable to to p rear grounding receptacle. Step 1 Attach th[...]

3-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Attaching the Vertical Cab le-Management Trough Attaching the Vertical Cable-Management Trough Refer t o Figure 3-15 and use the fol lo wing proced ure to attach the vertical cable-management trough. Step 1 Positio[...]

Chapter 3 In stalling the Router Attaching the Ver tical Cable-Man agement Trough 3-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-15 Attach ing the V er tical Cable-Management T roughs P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P[...]

3-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Line Card Network In terface Ca bles Connecting Line Card Network Interface Cables This section de scribes ho w to route the network interf ace cables through th e router cable-management syst em and a t[...]

Chapter 3 In stalling the Router Connecting Line Car d Network Inter face Cables 3-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Repeat Steps 3 t hrough 5 for each ad ditional cable connecti on to that line card. Figur e 3-16 Conne cting a Netw or k Interf ace Cable to a Leg acy Line Ca[...]

3-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Line Card Network In terface Ca bles Step 6 Insert all cables into their assigned ports. Step 7 Place sev eral ev enly spaced velcro straps through slots on th e cable-management bracket ( Figur e 3-17 a[...]

Chapter 3 In stalling the Router Connecting Line Car d Network Inter face Cables 3-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-1 7 Cur r ent Style Cable Management Br ack et ACTIVE 0 CARRIER RX PKT ACTIVE 1 CARRIER RX PKT ACTIVE 2 CARRIER RX PKT ACTIVE 3 CARRIER RX PKT Q OC-3/STM-P[...]

3-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting GRP Route Processor Cables Connecting GRP Route Processor Cables This section de scribes ho w to connect cables to the console, aux iliary , and Ethernet ports on the GRP . The console and auxi liary por[...]

Chapter 3 In stalling the Router Connecting GRP Route Processor Cables 3-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note T o comply with T elcordia GR-1089 NEBS standard for electromagnetic compatib ility and sa fety , connect a ll cons ole, auxiliary , and Ethernet interfaces only to intra[...]

3-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting GRP Route Processor Cables Connecting to the GRP Auxiliary Port The auxiliary port on the GRP is an EIA/TI A-232 DTE DB-25 plug for connecting a modem or other DCE de vice (such as a channel service unit[...]

Chapter 3 In stalling the Router Connecting GRP Route Processor Cables 3-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 LEDs on the front panel i ndicate wh ich Etherne t receptacle is activ e when the GRP is operating. See “GRP Ethern et Port Connec tions” section on page 2-29 for addition[...]

3-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting GRP Route Processor Cables RJ-45 Connection Use the follo wing procedure to connect an Ethernet cabl e to the RJ-45 receptacle. Step 1 Plug the cable directly in to the RJ-45 receptacle. Step 2 Connect t[...]

Chapter 3 In stalling the Router Connecting PRP Route Processor Cables 3-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting PRP Route Processor Cables This section de scribes ho w to connect cables to the console, aux iliary , and Ethernet ports on the PRP . The console and auxiliary por[...]

3-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting PRP Route Processor Cables Note RP cables are not av ailable from Cisco, but are av ailable from any commercial cable vendor . Note T o comply with T elcordia GR-1089 NEBS standard for electromagnetic co[...]

Chapter 3 In stalling the Router Connecting PRP Route Processor Cables 3-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting to the PRP Auxiliary Port The auxiliary port on the PRP is a DTE, RJ-45 receptacle for connecting a modem or other DCE device (such as a CSU/DSU or a nother router)[...]

3-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting PRP Route Processor Cables Note RJ-45 cables are not a v ailable fr om Ci sco Systems; they are a vailable from outside commercial cable vendors. Use ca bles that comply with EIA/TIA-568 standards. Cauti[...]

Chapter 3 In stalling the Router Connecting an A larm Card Cable 3-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting an Alarm Card Cable Each router alarm card has one 25-pin Dsub connector , labeled Alarm ( Figure 3-21 ). Figur e 3-21 Alar m Card Cable Connection Alarm subconnectors ca[...]

3-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Pow er to the Power Shelf Caution Only safety extra-lo w voltage (SEL V) ci rcuits can be connecte d to the alarm connector . Maximum rating for the alarm circui t is 2 A, 50 VA . Note T o comply with T [...]

Chapter 3 In stalling the Router Connecting Power to the Power Shelf 3-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Connect each A C power cord to the back pa nel of the power shelf and secure them in place w ith their re tention clips ( Figure 3-22 ). Figur e 3-22 Connecting A C P ow [...]

3-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Pow er to the Power Shelf Because there is no color co de standard for source DC wiring, you must b e sure that po w er source cables are connected to the power shelf with the proper positiv e (+) and ne[...]

Chapter 3 In stalling the Router Connecting Power to the Power Shelf 3-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-23 DC-Input T er minal Connections on th e DC-Input P o wer Sh elf A1- A1+ A2- A2+ B2+ B2- B1+ B1- Ground B1 Cov er with slotted screw hole; f astens to standoff in mi[...]

3-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Pow er to the Power Shelf Step 2 Connect th e ground and each pair of po wer cables to the DC-inp ut terminal stu ds as follo w s ( Figure 3-24 ): War n in g When reconnecting source DC power cables, alw[...]

Chapter 3 In stalling the Router Connecting Power to the Power Shelf 3-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Reins tall the p o wer cable co ver ( Figure 3-25 ). Figur e 3-25 Reinstalling the Source DC P ow er Cable Cov er 27219 Ground – + Cov er standoff Cov er with slotted s[...]

3-47 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Installing the Front Covers of Ci sco 12016 Original Series Routers Installing the Front Covers of Cisco 12016 Original Series Routers The chassis front co vers for t he po wer sh elf and u pper blo wer module, upp[...]

Chapter 3 In stalling the Router Installing the Front Co vers of Cisco 12016 Original Series Routers 3-48 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-26 Router Chassis F ront Co vers P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I [...]

3-49 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Installing the Front Cover of Cisco 12010 Enhanced Series Ro uters Installing the Front Cover of Cisco 12010 Enhanced Series Routers Refer t o Figure 3-27 and use the follo wing procedure to install the fr ont cove[...]

Chapter 3 In stalling the Router Installing the Front Co ver of Cisco 12010 Enhanced Series Routers 3-50 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-27 At taching the F ron t Co v ers 1 Release b uttons P W R O K F A U L T T E M P I L I M P W R O K F A U L T T E M P I L I M P W R O K [...]

3-51 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Installing the Front Cover of Cisco 12010 Enhanced Series Ro uters This completes the hardw are installation procedures for Cisco 12016, Cisco 12416, and Ci sco 12816 routers. Proceed to the ne xt chapter to perfor[...]

Chapter 3 In stalling the Router Installing the Front Co ver of Cisco 12010 Enhanced Series Routers 3-52 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01[...]

CH A P T E R 4-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 4 System Startup and Basic Configuration The system startup pro cess and a procedure for perfor ming a basic co nfi guration of your Cisco 12016, Ci sco 12416, or Cisco 1281 6 router is presented i n the follo wing sections: • Sourc[...]

Chapter 4 Syste m Startup and Ba sic Configuration Sources of Cisco IOS Softw are 4-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 This chapter p rovid es you with the i nformation to conf igure your system so that it can access the network or enable ot her hosts in the network to access your sy[...]

4-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Boot P rocess O vervie w • A terminal de vice is connected to the console po rt on the RP , po wered on, and conf igured for 9600 bps, 8 data bi ts, no parity , and 2 stop bits (9600, 8N2). Note [...]

Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 7. When the Cisco IOS softw are boots, it polls all other cards i n the system, po wers them on, and loads the Ci sco IOS software the y requi[...]

4-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Powering On the Rou ter and Observin g the Boot Process Step 4 Observ e the RP alphanumeric LED di splays during the RP boot pr ocess ( Figure 4-1 ). Figur e 4-1 RP Alphanumer ic LED Displays Each [...]

Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Observe the status of the RP interfaces (see Figure 4-2 for the GRP and Figure 4-3 for the PRP). The LEDs on the RP sho w system status[...]

4-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Powering On the Rou ter and Observin g the Boot Process Figur e 4-2 GRP LEDs—P artial F ront P anel V ie w Figur e 4-3 PRP Ether net P orts and LEDs—P ar tial Fr ont Pa nel View H10762 SLO T -0[...]

Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 6 During the line card boot process, observ e the alphanumeric LED displays on each line card ( Figure 4-4 ). Note The line card boot pro[...]

4-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Powering On the Rou ter and Observin g the Boot Process RO M I GET The R OM image is being loaded into l ine card memory . RP Cisco IOS software FA B L WA I T The line card is wa iting for the f ab[...]

Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 7 The router automaticall y boots using the defaul t image (if a fl ash memory card containing a v alid Cisco IOS soft ware image is ins[...]

4-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Manually Booting the System Y ou do not need to conf igure the network interf aces immediately , b ut you cannot connect to a net work un til you conf igure the interf aces for operat ion in your [...]

Chapter 4 Syste m Startup and Ba sic Configuration Manually Booting th e System 4-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Locating a Valid Cisco IOS Software Image Use the follo wing procedure to locate a Cisco IOS so ftware image to manuall y boot the router fr om the R OM monitor promp[...]

4-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Manually Booting the System Caution Use the boot flash command with care. Mak e sure that the flash memory card inserted in slot 0 contains a valid Cisco IOS softw are image; otherwise, you coul d[...]

Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Router 4-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note If you did not ch ange the conf iguration re gister setting, the ne xt reload will re vert to the def ault conf iguration regi ster setting (0x0102). Thi s setting cau[...]

4-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface Y ou can use the method t hat suits your operating sty le and your kno wledge of network conf iguration requirements. Whether you use the setup command facility or glob al[...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The conf iguration modes allo w you to make changes to the run ning conf iguration f ile. If you sa ve the conf iguration, the commands are stored and persist acr oss rou[...]

4-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface The follo wing example sh ow s the change from user EXEC mode to pri vile ged EXEC mode. Router> enable password: < passwor d > Router# For information about usin[...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Subinterface Configura tion Mode Use subinterface co nf iguration mode to co nf igure multiple vir tual interfaces (called subinterf aces) on a single physical inte rface[...]

4-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface T o use the setup command to change a conf iguration: 1. Y ou must toggle through each syst em conf iguration dialog prompt until you come to the item that you intend t o [...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 to configure each interface of the system. Would you like to enter basic management setup? [yes/no]: Yes Configuring global parameters: Enter host name [Router]: Milo The[...]

4-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface line vty 0 4 password bambam no snmp server ! no ip routing ! interface Ethernet0 no shutdown ip address 172.16.72.2 255.255.255.0 ! interface POS1/0 shutdown no ip addres[...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 For e xample, during the conf iguration of a POS interface, (using the setup facility initial router startup) , the script appears as the follo wing exam ple as you respo[...]

4-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface Configuring Host Name The host name you conf igure your router with must: • Foll o w the rules for ARP ANET host names. • Start with a letter , end w ith a letter or d[...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 In either case, you cannot use a number as the first character . Spaces, howe ver , are v a lid password characters. F or example, two wor ds is a v alid password. Leadin[...]

4-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface The follo wing conf iguration dialog e xample shows h o w to conf igure the system for an Ethernet interf ace that uses the IP netw ork layer protocol. Note The Ethernet i[...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The follo wing example sh o ws ho w to configu re an A TM line card to use IP . Configuring interface parameters: Configuring interface ATM1/0: Is this interface in use?:[...]

4-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface System image file is "tftp://xxx.xxx.xxx.xxx/directory/ghall/gsr-p-mz" cisco 12410/GRP (R5000) processor (revision 0x05) with 262144K bytes of memory. R5000 CPU [...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Enter the conf igure terminal comman d to enter global conf iguration mode. Milo# configure terminal Enter configuration commands, one per line. End with CNTL/Z. M[...]

4-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface clock source internal ! interface POS1/1 no ip address no ip route-cache cef no ip route-cache shutdown crc 32 ! interface POS1/2 no ip address no ip route-cache cef no ip[...]

Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Viewing the Running Configuration Settings Y ou can use the sho w startup-config command to vie w the current conf iguration settings stored in NVRAM. The follo wing exam[...]

4-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register ! map-list atm1 ip 10.1.1.1 atm-vc 1 ip 10.1.1.3 atm-vc 2 ip 10.1.1.4 atm-vc 4 ip 10.0.0.1 atm-vc 3 ip 10.0.0.5 atm-vc 10 ip 10.0.0.6 atm-vc 11 no [...]

Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Read boot system commands from the conf iguration f ile stored in NVRAM. Ta b l e 4-4 def ines software conf iguration regi ster bits. Caution [...]

4-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register The boot f ield ( Ta b l e 4-5 ) defi nes a source for booting a def ault Cisco IOS software i mage required t o run the rout er . The content of t[...]

Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Depending on the b oot f ield setting, the system ignores boot i nstructions in the system conf iguration fi le and performs one of the follo wing [...]

4-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register For e xample, the filename f ormation process may yiel d a range of typical f ilenames like the follo wing: cisco2-grp . . . cisco17-grp The system[...]

Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Set the conten ts of the softw are conf iguration register b y entering the conf ig-register value command, where value is a hexad ecimal nu[...]

4-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register Low-Order Bits in the Software Configuration Register This section pro vides detail about of the lo w-order bits in the software conf iguration re [...]

Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note If a bootable Cisco IOS software i mage exists in a flash memory card instal led in slot 0 or slot 1, the configuration register setting is o [...]

4-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register High-Order Bits in the Software Configuration Register This section describes the significance of high -order bits in t he software configuration r[...]

Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Bits 11 and 12 of the softw are config uration r egister determine the data transmission rate of the console terminal. Ta b l e 4-8 shows the b[...]

4-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Recovering a Lost Password Recovering a Lost Password Use the follo wing procedure to reco ver a lo st password. Note This procedure does not wo rk for password reco very if the enable passw ord i[...]

Chapter 4 Syste m Startup and Ba sic Configuration Recovering a Lost Password 4-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 enable “use net in IP bcast address”? y/n [n]: enable “load rom after netbootfails”? y/n [n]: enable “use all zero broadcast”? y/n [n]: enable “break/abor[...]

4-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Recovering a Lost Password Step 7 Enter the enable command an d password (if prompted). Milo> enable Password: < password > Milo# Step 8 Enter the show startup-conf ig command to display [...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Using RP Flash Memory Cards This section de scribes ho w to use RP flash memory cards and in cludes informatio n on the follo wing topics: • Installing an d Remov in[...]

4-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Step 3 Insert the card i nto the appropriate slo t until the card completely seats in the connector and the ejector button pops out (see Figure 4-5 b) . Caution The fla[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 4-5 Installing and Removing a Flash Memory Car d SLOT -0 SLOT -1 RESET AUX EJECT SLOT -0 SLOT -1 RESET AUX EJECT a H10703 b c SLOT -0 SLOT -1 RESET AUX EJECT[...]

4-47 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Formatting a New Flash Memory Card The flash memory card that shipped wi th your router contai ns the defa ult Cisco IOS software i mage you need to boot your rout er .[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-48 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Specifying a Cisco IOS Software Image to Boot the System Use the procedure in this section to identi fy a specif ic Cisco IOS software image ( new . image in this exam[...]

4-49 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Flash Memory Commands This section d escribes console commands th at you can use to access the different types of flash memori es. Enter these co mmands from th e pri v[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-50 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 dir Command T o list the directory cont ents of the flash memo ry in use, enter the dir [ device-name ] command. Where device-name can be slot0: , slot1: , or bootflas[...]

4-51 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards squeeze Command The squeeze command permanently remov es deleted f iles from flash memory and makes all ot her (undeleted) f iles cont iguous to conserv e storage space[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-52 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Booting from Flash Memory T o boot from flash memory , the boot f ield in the softw are conf iguration re gister (bits 3 through 0) must be set to a v alue between 2 a[...]

4-53 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Use the follo wing command to copy a f ile to flash memory . Milo# copy tftp: f ilename [ bootflash: | slot0: | slot1: ] f ilename Where: • tftp: f ilename specifies [...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-54 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CC Milo# In this example: • The excl amation points ( !!!) appear as the source f ile is being[...]

4-55 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Use the follo wing procedure to c opy a boot able image into the flash memory card: Step 1 Boot the r outer . Step 2 Enter the enable command and p assword (if prompted[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-56 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Copying Cisco IOS Software Images Between Flash Memory Cards This procedure describes ho w to copy a later Cisco IOS softw are image from one flash memory card to anot[...]

4-57 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Step 3 Enter the follo wing commands to designate the f ile named im age.new in the memory card in slot 0 as the n ew default sy stem image for boot purposes: Milo# con[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-58 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Copying the Startup Configuration Fil e from NVRAM to a Flash Memory Card Use the following procedure to copy a co nf iguration file fr om NVRAM to a flash memory card[...]

4-59 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Milo# copy startup-config slot0:myfile2 20575008 bytes available on device slot0, proceed? [confirm] Address or name of remote host [1.1.1.1]? Loading new.image from 1.[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-60 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Copying the Running Configuration Fil e from DRAM to a Flash Memory Card Use the follo wing procedure to cop y the running con fi guration f ile from DRAM on the RP to[...]

4-61 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Step 2 Enter the dir comm and to further v erify that the conf iguration f ile is copied correctly to the memo ry card in slot 0: Milo# dir slot0: -#- -length- -----dat[...]

Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-62 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Booting a New Cisco IOS Software Image from a Flash Memory Card Use the follo wing procedure to boot a ne w image from a flash memory card in slot 0 or slot 1 (this ex[...]

4-63 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Post-Installation Procedures Post-Installation Procedures After you install the router hardware, check all external connect ions, turn on the system po wer , allow th e system to boot up, and mini[...]

Chapter 4 Syste m Startup and Ba sic Configuration Post-Installation Procedures 4-64 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01[...]

CH A P T E R 5-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 5 Troubleshooting the Installation This chapter con tains general troubl eshooting in formation to help i solate the cause of dif ficulties y ou might encount er during the installation and initial startup of the system. The procedure[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting Ov erview 5-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting Overview This section de scribes the methods used in t roubleshooting the router . Th e troubleshooting meth ods are org anized according to the major subsystem[...]

5-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting Ove rview • Chassis backplane po wer distrib ution. –48 VDC po wer from the po wer supplies is transfer red to the cha ssis back plane. Th e –48 VDC is distrib uted to all of the ca[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting Ov erview 5-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Identifying Startup Issues Ta b l e 5-1 sho ws the contents of the alphanumeric di splays on the RP and the line cards, as well as the normal LED states on the alarm card, the [...]

5-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem Troubleshooting the Power Subsystem This section contain s information to troub leshoot the po wer subsystems: • T roubleshooting the A C-Input Po wer Subsystem, pa[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the AC-Input Power Subsystem A C-input po wer supplies are monitored fo r internal temperature, voltage, and current lo ad b y the MBus mo dule on t [...]

5-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem Figur e 5-2 250 0 W A C P ower Supply Co mponents Use the follo wing procedure to troubl eshoot the A C po wer supply if it is not operating properly after i nstallat[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 2 Make sure the router i s powered on an d that all power cords are connected properly: • Po wer cords on the back panel of the po wer shelf are secured in pl[...]

5-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem • TEMP (flashing yello w—2500 W PEM only )—Indicates that a po wer supply fan is l ocked or malf unctioning. Note If the temp indicator is flashin g , the fault[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the DC-Input Power Subsystem DC-input po wer supplies are monitored for i nternal temperature, v oltage, and current lo ad b y the MBus mo dule on t[...]

5-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem Figur e 5-4 2400 W DC Po wer Supply Co mponents 1 Handle 3 Ejector le ver 2 Fan 4 Power swi tch 129494 PW R OK F AUL T TEMP OC PWR OK F A UL T TEMP OC 3 1 2 4[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the follo wing procedure to troublesh oot the DC PEM if it is not operating properly after inst allation. Step 1 Make sure the PEM is seated properly: • Eject[...]

5-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem • TEMP (yello w)—Indicates th at the PEM is in an ov ertemperature condition causing a shut-do w n to occur . Note If the temp indicator is on, t he fault indica[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Additional Power Subsystem Troubleshooting Information This section contain s additional tr oubleshooting i nformation to help you isolate the cause of a po wer pro[...]

5-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem 16 3300 NA 5064 17 3308 NA 5064 18 3292 NA 5056 19 3300 NA 5072 20 3288 NA 5056 21 3296 NA 5072 22 3292 NA 5064 24 NA NA 5096 29 NA NA 4920 Slot # 48V AMP_48 (Volt) [...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the follo wing procedure to troublesh oot the po wer distrib ution system. Step 1 Check each po wer supply to make sure that: • The ejector lev er is fully cl[...]

5-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem Troubleshooting the Processor Subsystem The router processor subsystem consi sts of the RPs, line cards, and alarm cards. The RPs and line cards ha ve two onb oar[...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the RP When the router is po wered on, the alphanumeric display on the RP indi cate the follo wing ( Figure 5-5 ): • Upper ro w—Indicates whi[...]

5-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem Troubleshooting Using the RP Alphanumeric Display Y ou can use the alphan umeric display to i solate a problem wit h the RP . The two ro ws on the alph anumeric d[...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting Line Cards When the line card is po wered on, the di splay on the line card indicates the follo wing ( Figure 5-6 ): Ta b l e 5-2 T r oubleshooti[...]

5-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem • Upper ro w—Indicates which software com ponent is runnin g. At the end of a successful boot process, this display reads IOS. • Lo wer row—Indi cates the[...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting Using the Line Card Alphanumeric Display Y ou can analyze the alphanume ric displays to isolat e a problem with the line card. The two ro ws of t[...]

5-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem RST SA VE Contents of the reset reason register are being sav ed. Line card R OM monitor IO RST Reset I/O register is being accessed. Line card R OM monitor EXPT [...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 IOS FA B W 3 Cisco IOS software is w aiting for the fabric to be ready . RP IOS softwa re IOS VGE T 3 Line card is obtaining the Cisco IOS release. RP IOS softw [...]

5-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem RSET DONE System rese t complete . RP MBUS DNLD MBus agent is do w nloading. RP MBUS DONE MBus agent do wnload complete. RP RO M I DONE Acquisi tion of R OM imag [...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 DIA G MODE Diagnostic mode. RP DIA G LO AD Do wnloading field diagnostics o ver the MBus. RP DIA G F_LD Do wnloading f ield diagnostics ov er the fabric. RP DIA [...]

5-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem Troubleshooting Using the Alarm Cards The router is equipped with two al arm cards: • One card occupies the dedicated far left slot of the upper card cage. • [...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 5-7 Sta tus LEDs on th e Alar m Car d Monitoring Critical, Major, and Minor Alarm Status The alarms can warn of an ov e rtemperature conditio n: • On a[...]

5-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric Note Y ou can use the audio alarm cutoff switch to visually check that the alarm card indicators ar e operating properl y . If no au dible alar m is acti ve, pressing t[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Switch Fabr ic 5-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Enter the sho w controller s f ia command for all installed lin e cards and sa ve the output from each. Step 4 Proceed to the next section, Analyzing the Dat a[...]

5-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric Router# show controllers fia Fabric configuration: Full bandwidth, redundant fabric Master Scheduler: Slot 17 Backup Scheduler: Slot 16 From Fabric FIA Errors ---------[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Switch Fabr ic 5-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 To Fabric FIA Errors ----------------------- sca not pres 0 req error 0 uni fifo overflow 0 grant parity 0 multi req 0 uni fifo undrflow 0 cntrl parity 0 uni req 0 cr[...]

5-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric The common failu re patterns and recommend ed actions for crc16 errors are as follo ws (one step at a time until the problem goes a way): 1. Errors indicated on more th[...]

Chapter 5 Troublesho oting the Installation Troublesh ooting the Switch Fabr ic 5-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 -------- -------- -------- -------- -------- Los 0 0 0 0 0 state Off Off Off Off Off crc16 876 257 876 876 876 To Fabric FIA Errors ----------------------- sca not pr[...]

5-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric Properly Seating Switch Fabric Cards The switch fabric cards in the router can be challenging to insert, and may requ ire a small amount of force to seat correctly . If[...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 1 Clock Scheduler Card 3 Switch Fabric Cards 1 8-port OC3 POS controller (8 POs). 1 OC12 POS controller (1 POs). 1 OC48 POS E.D. controller (1 POs). 7 OC48 POS con[...]

5-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Cooling Subsystem Figur e 5-8 Cooling Air Flow 26204 Air e xhaust Upper card cage Room air Bottom blo wer module Air filter Air e xhaust P ow er supply shelf Middle card cage Low er [...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Blower Module Operation The blo w er modules maintain acceptable op e rating temperatures for the internal components by dra wing cooli ng air through a replaceabl[...]

5-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Cooling Subsystem Overtemperature Conditions The follo wing console error message i ndica tes that the system has detected an ov ertemperature condition or out-o f-toler ance power v[...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Make sur e the blo wer modules are operating properl y when you po wer on the system. • T o determine if a blo wer module is operat ing, check the t wo LE[...]

5-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Cooling Subsystem[...]

Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01[...]

CH A P T E R 6-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 6 Router Field Diagnostics This chapter descr ibes the diagnostic command s you can use to troubleshoot l ine cards, Route Processor cards (PRP an d GRP), Switch Fabri c Cards (SFC), and Clock Scheduler Cards (CSC) instal led in Cisco[...]

Chapter 6 Rou ter Field Diagnostics Diagnostics Ove rview 6-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Easy access to the most current di agnostics software—Because the field diagnostic softw are is no w maintained as a separate image, the most recent versio n is alw ays a v ailable on[...]

6-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Field-Programmable Gate Array Overview Diagnostic testing stop s when all of the te sts are completed, are terminated by the user , or by default if an error is encount ered . If multiple cards are specif ied fo[...]

Chapter 6 Rou ter Field Diagnostics Field-Programm able Gate Arr ay Overview 6-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Some FPGA images are b undled within the Cisco IOS image and are updated along with a ne w release. These type of FPGA images do n ot require flash memory storage an d ar[...]

6-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Field-Programmable Gate Array Overview Note Before updating the ne xt line card, wait about 30 second s after the Cisco IOS software reloads on the line card to gi ve the router a chance to synchronize all of it[...]

Chapter 6 Rou ter Field Diagnostics Field-Programm able Gate Arr ay Overview 6-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 2 Enter the diag slot- number update-fpga source { tftp | flash } sour ce-path command to update the fl ash memory . Where: • slot-number is the slot number of th [...]

6-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Field-Programmable Gate Array Overview FD 3> Compiled by ckhuong on Fri Jan 17 15:51:36 PST 2003 FD 3> view: ckhuong-conn_isp.inti4 FD 3> ***************************************************** Diagnostic[...]

Chapter 6 Rou ter Field Diagnostics Using the diag Command 6-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Using the diag Command Y ou can use the diag command to run field di agnostics on a line car d, Route Processor card (PRP and GRP), Switch Fa bric Card (SFC), or Clock and Scheduler Card ([...]

6-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Using the diag Command Diagnostic Commands for Cisco 12000 Series Rout Processors The follo wing diagnostic commands apply t o GRP and PRP route processors. diag slot-num ber [ ver bos e ] [ wait ] [ full ] [ co[...]

Chapter 6 Rou ter Field Diagnostics Using the diag Command 6-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 sour ce-path Specifies t he path to the diagno stic image f ile c12k-fdiagsbflc-mz. IOS Release Where IOS Release corresponds to the Cisco IOS release number . F or example: c12k-fdiagsbf[...]

6-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Using the diag Command ver bos e (Optional) Enab les progress and error messages to be displayed on th e console. By default, only the mini mum status messages appear on the console, along with the f inal resul[...]

Chapter 6 Rou ter Field Diagnostics Using the diag Command 6-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 After all diagnostic tests are completed on a lin e card, a P ASSED or TEST F AILURE message appears on the console. • If the line card passes, the Ci sco IOS software image on the line[...]

6-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics diag Command Output Examp les Caution Do not replace memory compo nents without properl y grounding both the bo ard and yourself. diag Command Output Examples This section contain s output e xamples using diag [...]

Chapter 6 Rou ter Field Diagnostics diag Command Outp ut Examples 6-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 FD 7> ***************************************************** FD 7> GSR Field Diagnostics V6.05 FD 7> Compiled by award on Tue Jul 30 13:00:41 PDT 2002 FD 7> view: award-[...]

6-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics diag Command Output Examp les Loading images/award/c12k-fdiagsbflc-mz from 192.164.1.1 (via Ethernet0): !!!!!! (...) 00:08:24: Downloading diags from tftp file tftp:// 192.164.1.1/images /award/c12k-fdiagsbflc-[...]

Chapter 6 Rou ter Field Diagnostics diag Command Outp ut Examples 6-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 FDIAG_STAT_IN_PROGRESS(7): test #25 TBM to RX SOP Packet - 4302 Terminal Loopback FDIAG_STAT_IN_PROGRESS(7): test #26 TBM to RX SOP Packet - Framer System Bus Loop FDIAG_STAT_IN_PR[...]

CH A P T E R 7-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 7 Maintaining the Router Y our router is equipped as ordered and is ready for instal lation and startup when it is shipped. As your netw orking requirements change, you may need to upgrade the system b y adding or changing component s[...]

Chapter 7 Maintaining the Router Powering Off the Router 7-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Removing and Replacing Cards from the Chassis, page 7-79 • Upgrading the Switch F abric, page 7-86 • Remov ing and Installing a Chassis, page 7-88 • Removing and Replacing a Po wer[...]

7-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders on Original Cisco 12000 Series Routers Step 3 V erify that the PWR OK indicator on each po wer supply is of f. Step 4 V erify that the OK in dicator on[...]

Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Installing the Front Covers Refer t o Figure 7-1 and use the fol lo wing proc edur e to install the front covers[...]

7-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders on Original Cisco 12000 Series Routers Figur e 7 -1 Router Chassis Fr ont Cov ers 1 Ball stud 2 Ball stud clip P W R O K F A U L T T E M P I L I M P W [...]

Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Attaching Bezel Extenders to the Front Cover Use the fol lo wing proc edure to at tach the be zel e xtenders to [...]

7-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders on Original Cisco 12000 Series Routers Figur e 7 -2 Attac hing the Be zel Ext enders to a Car d Cage Fr ont Cov er Step 5 Hold the card cage front co v[...]

Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -3 At tachi ng the F ront Co vers Usi ng Bez el Ext enders 1 Ball stud 2 Ball stud clip P W R O K F A [...]

7-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders on Original Cisco 12000 Series Routers Step 6 Push the front co ver into the ball st ud clips so that the front co ver is flush with the front of the c[...]

Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -4 Opening the Chas sis Air Filt er Door Caution Be especially careful not to damage the honeycomb sc[...]

7-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders on Original Cisco 12000 Series Routers Step 2 Remo ve the (4) scre ws from each corner that fasten the partial front cov er to the air f ilter door ( [...]

Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 4 Secure the front co ver to the ai r f ilter door usi ng the (4) scre ws that you remov ed in Step 2. Cau[...]

7-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing Front Doors o n Cisco 12016 Enhanced Series Routers Removing and Installing Front Doors on Cisco 12016 Enhanced Series Routers The Cisco 12016 enhanced series routers ha ve ne w front doors[...]

Chapter 7 Maintaining the Router Removing and Installing Front Door s on Cisco 12016 Enhanced Series Routers 7-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Open the top front door b y pressing the r ight latch b utton ( Figure 7-7 ). Figur e 7 -7 Opening the F ront Door 1 Front door la[...]

7-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing Front Doors o n Cisco 12016 Enhanced Series Routers Step 2 Remo ve t he front door by lif ting the (top and bottom) hin ge pins to free the d oor from the chassis ( Fig ure 7-8 ). Caution M[...]

Chapter 7 Maintaining the Router Removing and Installing Front Door s on Cisco 12016 Enhanced Series Routers 7-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Remo ve th e b umpers and pi vot blo cks from the door as sho wn in Figure 7-9 . Figur e 7 -9 Removing the Bumpers and Piv o t Blo[...]

7-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 4 Reinstall the h ardware to the opposi te sides of the front door: a. Mount pi vot blocks to the left side and t ighten the scre ws until snug. b. Mount the b um[...]

Chapter 7 Maintaining the Router Cleaning or Replacing the Chassis Air Filter 7-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Cleaning or Replacing the Chassis Air Filter on Cisco 12016 Original Series Routers Use the follo wing procedure to clean or replace an original series air f ilter . St[...]

7-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 2 Lift up the air f ilter and c a refully slide it ou t the door ( Figure 7-11 ). Caution Be careful not to damage the hone ycomb screens on the back of the air f[...]

Chapter 7 Maintaining the Router Cleaning or Replacing the Chassis Air Filter 7-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 V isually check the condition of the air f ilter to deter mine whether to cle an it or install a new replacement. • Dirty—Y ou can v acuum or replace the fil[...]

7-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 5 Lift up the air f ilter door so that th e four guide pins are inserted in the corresponding ho les on each side of the switch f abric card cage ( Figure 7-13 ).[...]

Chapter 7 Maintaining the Router Cleaning or Replacing the Chassis Air Filter 7-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Cleaning or Replacing the Chassis Air Filter on Cisco 12016 Enhanced Series Routers Use the follo wing procedure to clean or rep lace the enhanced series air f ilter . [...]

7-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 2 Lift up the air filter and carefu lly slide it out of the door ( Figure 7-11 ). Caution Be careful not to damage the hone ycomb screens on the back of the air f[...]

Chapter 7 Maintaining the Router Removing and Replacing Blower Modules 7-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 V isually check the condition of the air filter to deter mine whether to clean it or install a new replacement. • Dirty—Y ou can v acuum or replace the filter . Cau[...]

7-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replac ing Blower Modules If you ar e replaci ng an: • Original blo wer module (GSR16-B LOWER=)—Use an original blo wer module or enhanced capacity blo wer module s as replacements. • Enhanced c[...]

Chapter 7 Maintaining the Router Removing and Replacing Blower Modules 7-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Heads-do wn orientation—Install the blo wer module in the lo wer blower module bay in the “heads-do wn” orientation with the three f an air intake openings fa ce up.[...]

7-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replac ing Blower Modules Step 2 Install the new blo wer module into the chassis ( Figure 7-17 ): a. Lift the blo wer module (with two hands) and slide it h alfway i nto the module bay . b. Slo w ly p[...]

Chapter 7 Maintaining the Router Removing and Replacing Blower Modules 7-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the Blower Installation Use the follo wing procedure to troubleshoot a blo wer module if it is not operating properly after inst allation. Step 1 Be sure the r[...]

7-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing AC and DC Power Subsystem Components Removing and Replacing AC and DC Power Subsystem Components This section contains remov al and repl acement procedures for the A C and DC po wer systems [...]

Chapter 7 Maintaining the Router Removing and Re placing AC and DC Power Subsyste m Components 7-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Power Supply and Power Shelf Compatibility Cisco 12016 series routers are a vailable with either an A C or a DC power supply system. T wo ty pes of po [...]

7-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing AC and DC Power Subsystem Components AC Power Supply (PWR-GSR16-AC=) Use to replace original 2000 W A C power supplies only . All po wer supplies in the po wer shelf mu st be 2000 W . Do not[...]

Chapter 7 Maintaining the Router Removing and Re placing AC and DC Power Subsyste m Components 7-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Installing Upgrade Kits When installing a power system upgr ade kit, you replace the follow ing components: • A C po wer upgrades (12000/16-A C-UP=, [...]

7-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Removing and Replacing an AC Power Supply This section pro vides the procedure to remo ve an A C po wer supply from the standard single-le vel A C power shelf. The proce[...]

Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figure 7-19 identif ies the components of a 2000 W A C po wer supply . Figur e 7 -1 9 20 0 0 W A C P ow er Supply Components Handle Ejector le ver 26200 PW R O K FAU LT T[...]

7-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Figure 7-20 identif ies the components of a 2500 W A C po wer supply . Figur e 7 -20 250 0 W AC P ow er Supply Co mponen ts 1 Ejector handle 2 Capti ve scr ew 129495 Pwr[...]

Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 T o remov e and replace an A C power supply , use the following procedure. Caution Y ou cannot mix power supply types within the chassis. If you plan to replace a 2000 W [...]

7-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Step 4 Re mov e the 2000 W PEM ( Figure 7-21 ): a. Release the ejector lev er by lifting the spring cl ip. b. Pi vot the le ver do wn to eject the po wer supply from its[...]

Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Re mov e the 2500W PEM ( Figure 7-22 ): a. Loosen the captiv e screw to release the ejector handle. b. Pi vot the ejector handle do wn to eject the po wer supply f[...]

7-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Step 7 Install the 2000W PEM ( Figure 7-23 ): a. Slide the po wer supply into the bay until it mates with its backplane connector . Caution T o pre vent damage to the po[...]

Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -23 Installing a 200 0 W A C P o wer Supply PW R O K FAULT TEMP I LIM P WR OK FAULT TEMP I LIM PW R OK F AULT TEMP I LIM 26869[...]

7-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Step 8 Install the 2500 W po wer supply ( Figure 7-24 ): a. Slide the po wer supply into the bay until it mates with its backplane connector . Caution T o pre vent damag[...]

Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the AC Power Supply Installation Use the follo wing procedure to troubl eshoot the A C po wer supply if it is not operating properly after i nstallation. [...]

7-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply • TEMP (yello w)—Indicates that the powe r supply is in an o ver temperature conditio n, causing a shu t-down to occur . Note If the temp indicator is on, t he fault[...]

Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • OC (2500 W PEM only) (stead y , or flashing yello w after 10 seconds)—Ind icates the out put current of the po wer supply has exceeded its limit and [...]

7-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Re placing the St andard A C-Input Power Shelf Step 2 Disc onnect each of the A C power cords fr om the back panel of the po wer shelf by lifting the retent ion clip and unpl ugging the cor d ( Figure[...]

Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Unsea t the po wer shelf from the chassis ( Figure 7-26 ): a. Loosen the two capti ve scre ws on each s ide of the po wer shelf. b. Loosen the e jec[...]

7-47 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Re placing the St andard A C-Input Power Shelf Step 4 Remove th e po wer shelf by grasping the flan ges on each side and slo wly pulling the shelf along the chassis track to remove it ( Fi gure 7-27 )[...]

Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-48 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Inse rt the ne w po wer she lf halfway into the chassis. Step 6 Connec t the po w er shelf to the chassi s po wer interface panel connectors ( Figur[...]

7-49 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Re placing the St andard A C-Input Power Shelf Step 7 Seat the po wer shelf to the chassis ( Figure 7-29 ): a. T ighten the ejector ja ckscre w . b. T ighten the captive scre ws on each flange. Figur [...]

Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-50 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 8 Re connect each of the A C power cords to the back panel of the po wer shelf and secure them in place with their retentio n clips ( Figure 7-30 ). F[...]

7-51 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Shelf Removing and Replacing the Optional 2-Level AC-Input Power Shelf Use the following procedure to remo ve and replace the optional 2-lev el A C-inpu[...]

Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-52 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 2 Disc onnect each of the A C power cords fr om the back panel of the po wer shelf by lifting the retent ion clip and unpl ugging the cor d ( [...]

7-53 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Shelf Step 3 Loose n the two capti ve screws on each side of the po wer shelf. Step 4 Loose n the ejector jackscrew to unseat th e po wer shelf from the[...]

Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-54 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 6 Inse rt the ne w po wer she lf halfway into the chassis. Step 7 Connec t the po w er shelf to the chassi s po wer interface panel connectors[...]

7-55 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Shelf Step 8 Install the power shel f by grasp ing the flanges on each si de and slo wly sliding the shelf into the chassi s al ong the track ( Figure 7[...]

Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-56 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 9 Re connect each of the A C power cords to the back panel of the po wer shelf and secure them in place with their retentio n clips ( Figure 7[...]

7-57 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Shelf Troubleshooting the AC Power Shelf Installation Use the follo wing procedure to troubl eshoot the A C po wer shelf if it does not operate properly[...]

Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-58 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • TEMP (yello w)—Indicates that the powe r supply is in an o ver temperature conditio n, causing a shu t-down to occur . Note If the temp indic[...]

7-59 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Upgrading the AC-Input Powe r Shelf • OC (2500 W PEM only) (stead y , or flashing yello w after 10 seconds)—Ind icates the output current of the po wer supply exceeded its limit and an ov erload or short circu[...]

Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-60 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing a DC PEM This section contains the procedure to remov e and replace an DC PEM from the chassis. Befor e you begi n this procedure, read th e “Installation G[...]

7-61 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM Figure 7-37 identif ies the components of a 2400 W DC po wer supply . Figur e 7 -37 240 0 W DC P ower Supply Co mponents Caution Y ou cannot mix power supply types within the chassi[...]

Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-62 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the following procedure to remo ve and replace a DC PEM. Step 1 Power of f the PEM by switching its circuit break er of f. Step 2 Power of f the DC circuit breaker assigned to t[...]

7-63 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM Figur e 7 -38 Removing a DC PEM P W R O K F AU LT TEM P PW R OK F AU LT TE M P P W R O K FAU LT T E M P PW R O K FA UL T TE M P 26212 Loosen captiv e screw a Piv ot ejector le ver b[...]

Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-64 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Install the new DC PEM into the po wer shelf ( Figure 7-39 ): a. Slide the PEM halfw a y into the chassi s. b. Slo w ly push the po wer supply into the chassis u ntil it mate[...]

7-65 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM Figur e 7 -39 Installing a DC P EM Step 6 Power on the DC cir cuit breaker assig ned to that PEM. Step 7 Power on the PEM b y switching on its circuit break er . After the po wer-on[...]

Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-66 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the DC PEM Installation Use the follo wing procedure to troublesh oot the DC PEM if it is not operating properly after inst allation. Step 1 Ma ke sure the PEM is se[...]

7-67 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM • TEMP (yello w)—Indicates th at the PEM is in an ov ertemperature condition causing a shut-do w n to occur . Note If the temp indicator is on, t he fault indicat or also goes o[...]

Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-68 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing the DC-Input Power Shelf Use the follo wing procedure to remo ve and replace the DC-input po wer shelf. Caution T o remov e and replace the p[...]

7-69 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Step 3 Measure the v oltage acros s each pair of positi ve (+) and neg ati ve (–) t erminals of the power shelf to be sur e they are not re cei ving power . • Al[...]

Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-70 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -41 Disconnecting the Source DC P ow er Cables 28018 Ground – + A1- A1+ A2- A2+ B2+ B2- B1+ B1- Ground B1 Negativ e (–) cable lug P ositiv e (+) cable[...]

7-71 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Step 5 Unsea t the po wer shelf from the chassis ( Figure 7-42 ): a. Loosen the two capti ve scre ws on each s ide of the po wer shelf. b. Loosen the ejector jackscr[...]

Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-72 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 6 Remove th e po wer shelf by grasping the flan ges on each side and slo wly pulling the shelf along the chassis track to remove it ( Fi gure 7-43 ): Figur e 7[...]

7-73 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Step 7 Inse rt the ne w po wer she lf halfway into the chassis. Step 8 Connec t the po w er shelf to the chassi s po wer interface panel connectors ( Figure 7-44 ): [...]

Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-74 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 9 Seat the po wer shelf to the chassis ( Figure 7-45 ): a. T ighten the ejector ja ckscre w . b. T ighten the captive scre ws on each flange. War n in g The DC[...]

7-75 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf War n in g When reconnecting source DC power cables, alway s connect the ground cable first. a. Reconnect the ground cable to the ground terminal studs. Beginni ng w[...]

Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-76 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 11 Po wer on the source DC circuit breakers f or the PEMs. Step 12 V erify the polarity and v oltage readings across the pairs of positi ve and ne gati ve term[...]

7-77 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Troubleshooting the DC Power Shelf Installation Use the follo wing procedure to troubl eshoot the DC po wer shelf if it is not operating properly after i nstallation[...]

Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-78 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 4 Check the power su pply status in dicators: • PWR OK (green)—Indicates that the PEM is operating normally , and the source DC v oltage is within the nomi[...]

7-79 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis • OC (2400 W PEM only) (stead y , or flashing yello w after 10 seconds)—Ind icates the output current of the po wer supply exceeded its limit and an ov erload or s[...]

Chapter 7 Maintaining the Router Removing and Replac ing Cards from the Chassis 7-80 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Caution Handle all cards b y the metal card carrier edges only; a void t ouching the board or any connect or pins. After remo ving a card, carefully place it in an an[...]

7-81 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis Figur e 7 -48 Removing a Line Car d from th e Line Car d and RP Card Cage Removing and Replacing an Alarm Card The router is equipped with two alarm card s. One card o[...]

Chapter 7 Maintaining the Router Removing and Replac ing Cards from the Chassis 7-82 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -49 Alar m Card Locations in th e Upper and Low er Card Cag es ALARM ENABLED FAIL ACO/LT ALARM CSC 0 FAIL 1 0 1 2 ENABLED CRITICAL MAJOR MINOR SFC A C T I V[...]

7-83 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis Use the follo wing procedure to remove an d replace an alarm card from either the top or botto m card cage. Caution T o ensure proper alarm card scre w alignmen t, lin[...]

Chapter 7 Maintaining the Router Removing and Replac ing Cards from the Chassis 7-84 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing Switch Fabric Cards The switch fabric card cage is located be hind the air fil ter door on the front of the chassis. The card cage has fi ve k [...]

7-85 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis Step 2 R e move t he ca r d: a. Pi vot the ejector le vers to unseat t h e card from the backplane connector . b. Grasp the card by its metal card carrier and slide th[...]

Chapter 7 Maintaining the Router Upgrading the Switch Fabric 7-86 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Upgrading the Switch Fabric The switch fa bric on the Cisco 120 16 and the Cisco 1 2416 routers can be upgraded in the f ield. • Cisco 12016 Router s can be upgraded from a 2.5 Gbps s[...]

7-87 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Upgrading the Switch Fabric Upgrade Procedures T o upgrade the switch f abric, follo w these steps: Step 1 Power of f the router . Step 2 Remove all CSCs and SFCs from th e sw itch fabric card cage. See the “Rem[...]

Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-88 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 11 Run the show gsr command to verify that the ne w switch fabric cards are de tected by the system. Note The show gsr command output v aries slightly between each switch fab[...]

7-89 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Because you are removing all the compon ents (except the air f ilter) from the defecti ve chassis and then reinstallin g them in th e replacement chassis, the procedures that foll[...]

Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-90 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Preparing the Replacement Chassis Before you can be gin to install components in the repl acement chassis, you need to temporarily connect the centr al of fice grou nding system o[...]

7-91 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Step 6 Disc onnect the cables from each alarm card. Label each of the alarm card cables before you disconnect them. Step 7 Disc onnect the line card interface cables: a. Identify [...]

Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-92 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing the Chassis from the Equipment Rack Use the follo wing procedure to remo ve the chassi s from the equipment rack. War n in g T wo people are required to remove the chassi[...]

7-93 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Step 4 W orking from the top of the ch assis do wn, remove the scre ws that secure the chassis to the mounting flanges on the rack ( Figure 7-54 ). • Set the sc re ws aside fo r[...]

Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-94 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -54 Remo ving the Mo unting Scr ews 26864 Chassis mounting holes group E Chassis mounting holes group D Chassis mounting holes group C Chassis mounting holes group B Cha[...]

7-95 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Step 5 Position one person in front of th e chassis to suppor t and guide it whi le the second person slowly pushes the ch assis to slide it of f the r ack-mounting table and on t[...]

Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-96 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 7 T urn the scissor-jack scre w clockwise to slo wly lo wer the scissor-jack platform ( Figure 7-56 ). Figur e 7 -56 Closing the Scissor -J ack Pl at fo rm to L owe r th e Ch[...]

7-97 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g a Power Bus Board Fu se Installing the Replacement Chassis Use the follo wing procedure to inst all the replacement rack in the chassis. Step 1 Di sconnect th e temporary groun d conn ectio[...]

Chapter 7 Maintaining the Router Removing and Replacing a Po wer Bus Board Fuse 7-98 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the following procedure to replace a fuse on the po wer bus board. Step 1 Power of f the router (see Po wering Off t he Router , page 7-2 ). War n in g The router[...]

7-99 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g a Power Bus Board Fu se Figur e 7 -58 Removing and Replacing a P ow er Bus Board F use F2 F1 - MBus F2 - 5.1V bias Fuse is 2A/125V MBus module F1 Fuse Fuse pulling tool Fuse holder 28449 Sc[...]

Chapter 7 Maintaining the Router Removing and Replacing a Po wer Bus Board Fuse 7-100 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01[...]

A-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 APPENDIX A Technical Specifications This appendix i ncludes the follo wing sections: • Router Specif ications, page A-1 • Compliance and Safety Information, page A-5 Router Specifications The Cisco 12016, Cisco 12416 , and Cisco 12816 Router o[...]

Appendix A Technical Sp ecifications Router Specifications A-2 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01 Ta b l e A -1 Ph ysical Specifications fo r Cisco 1200 0 Ser ies Routers Description Va l u e Chassi s height • W ith standard A C-input po wer shelf or DC-input po wer shelf • W ith o[...]

A-3 Cisco 12016, Cisco 12416, and Ci sco 1281 6 Router Installation and Configuration Guide OL-11495-01 Appendix A Technical Sp ecifications Router Specifications Caution T o ensure that th e chassis conf iguration co mplies with the req uired po wer b udgets, use the on-line po wer calculator . Failure to properly v erify the conf iguration may re[...]

Appendix A Technical Sp ecifications Router Specifications A-4 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01 Input current rating 60A maximum @ 40.5 VDC Source DC service requirement Suf ficient to supply the rated i nput current. Local codes apply . 1 . For eac h PEM. Caution T o ensure that th [...]

A-5 Cisco 12016, Cisco 12416, and Ci sco 1281 6 Router Installation and Configuration Guide OL-11495-01 Appendix A Technical Sp ecifications Compliance and Safety Info rmation Compliance and Safety Information The Cisco 12016, Cisco 2416 and Ci sco 12816 routers are d esigned to meet the re gulatory comp liance an d safety ap prov al requirements .[...]

Appendix A Technical Sp ecifications Compliance and Sa fety Information A-6 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01[...]

B-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 APPENDIX B Site Log The site log pro vides a historical record of all action s rele v ant to the operation and maintenance of the rou ter . K eep your site log in a con venient place near the router where any one who performs the maintenanc e has [...]

Appendix B Site Log B-2 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01 Date Action Performed or Symptoms Observed Initials[...]

B-3 Cisco 12016, Cisco 12416, and Ci sco 1281 6 Router Installation and Configuration Guide OL-11495-01 Appendix B Site Log[...]

Appendix B Site Log B-4 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01[...]

IN-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 INDE X Numerics 100BASE-T maximum cable lengths 2-35, 2-44 specifications 2-35, 2-44 transmission specifications 2-35, 2-44 100BASE-TX 2-29 connections 3-38 10BASE-T connections 3-38 ports 2-36, 3-31, 3-36 16-bit register 4-31 25-pin D-subc onnec[...]

Index IN-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 asynchronous serial port s See auxiliary port Asynchronous Transfer Mode, interface configuration 4-26 attaching cables auxiliary and console port 3-36 autosensing 2-40, 3-38 auxiliary po rt connecting devices to 2-38, 3-33, 3-38 connecto r[...]

IN-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index attaching GRP Ethernet port 3-33 to 3-35 console port 2-39 DC-input power 2-19 DC-input power cable lug 2-20 interference 2-24 polarity, DC-input p ower shelf 2-20 cables, attaching auxiliary and console port 3-31 bonding and g rounding cab[...]

Index IN-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Cisco 12416 and 128 16 router insertion height 3-16 Cisco Express Forwarding (CEF) 2-40 clearances, air circulation 1-45 clips, bend radius 3-27 clock, system 1-20 clock and scheduler car d 1-20 commands boot 4-13, 4-34, 4-37 boot bootfl as[...]

IN-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index system 4-14 to 4-28 using c onfigu ration mo de 4-27 to 4-28 configuring f lash memory 4-44 connecting alarm card cable 2-45 auxiliary po rt 3-33 console port 3-32 connection guidelines, GRP 2-26 to 2-35 connection guidelines, PRP 2-37 to 2[...]

Index IN-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 shelf specifications A-3 DC-input power ent ry module removing 7-63 DC-input power shelf terminal connector locations 3-44 DC-to-DC co nverters 5-22 default boot filenam es 4-38 delete command 4-50 dir command 4-50 DRAM GRP attribute summar[...]

IN-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index F Fast Ethernet specifications 2-44 figures alarm card connector location 3-40 status LEDs 5-28 bonding and g rounding cabl e receptacle locations 2-23, 3-23, 3-24 GRP RJ-45 and MII Ethe rnet connecti ons 3-34 filenames, for booting ov er n[...]

Index IN-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 RJ-45 and MII Ethe rnet connecti ons (figure) 3-34 RJ-45 Ethernet connection 2-29 RJ-45 Ethernet R eceptacle and modular plug 2-31 soft reset switch function 1-27, 1-37 usage (caution) 1-27, 1-37 SRAM 1-33 GRP board U39 1-31 GSR rack-mounti[...]

IN-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index OK (green) 4-4 PWR OK 4-4 route processo r 5-19, 5-20, 5-22 line card alphanumeric LED displays 4-8, 5-21 attachin g inte rfa ce cables 3-27 LED sequences 4-8 network interface cable connection 3-28 RP card cage 1-2 line card and RP card ca[...]

Index IN-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 OEM bit 4-32 P Packet-over-SONET, interface configuration 4-25 parameters 4-22 part numb ers 1-42 passwords noting 4-24 recovering 4-43 valid 4-24 PCMCIA slot 1-35 slot descript ion 1-25 physical specificat ions A-2 pinouts alarm card conn[...]

IN-1 1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Config uration Guide OL-11495-01 Index R rack insertion 3-18 rack-mounting guidel ines 2-11 platform installati on 3-14 verifying rack dimensions 3-8 radio frequency interf erence See RFI prevention raising router 3-16 recovering a lost password 4-41 reload command 4-36 remov[...]

Index IN-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 site requir ements air flow 2-15 power 2-20 rack mounting 2-7, 2-11 site log B-1 supplemental eart h ground connection 2-22 temperat ure and humidity 2-17 soft reset (NMI) switch (cauti on) 1-27, 1-37, 5-19 software config uration register[...]

IN-1 3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Config uration Guide OL-11495-01 Index sensors 1-46 system specifications A-4 terminal connector locations DC-input power shelf 3-44 TFTP requests 4-34 TFTP server 4-33, 4-40 Token Ring 2-36, 3-31, 3-36 transceiv er 3-35 transmission recommendat ions 100BASE-T 2-44 Trivial Fi[...]

Index IN-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01[...]