Cisco 3000 Bedienungsanleitung

Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco T elePresence Sy s t e m 30 0 0 Assembl y Guide Use & Care Guide Field-Repl aceable Unit Guide October 31, 20 08 Text Pa rt Numbe r: OL -14521-0 1[...]

THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY P[...]

iii Cisco T elePresen ce System 3000 OL-14521-01 CONTENTS Preface ix Introd uct ion i-ix Conv enti ons i-ix Obtain ing Docu mentat ion, Obt aining Su pport , and Secur ity Gui deline s i-x Relat ed D ocum ent atio n i-x i-x Overview 1-1 Chapter Organi zation 1-1 Assembly Over view 1-3 Convent ions and Te rminol ogy 1-4 Tools an d Equip ment List 1-[...]

Cont ents iv Cisco Tele Presence Syste m 3000 OL-14521-01 Buildi ng the Table Assemb ly, Pr oduct ID CT S3K-FUR -MAPLE 6-5 Buildi ng the Table Assemb ly, Pr oduct ID CT S3K-M-T ABLE-G2 6-18 Assemblin g the Remaining Ci sco TelePres ence Elements 7-1 Parts Li st 7-1 Routing Power and Signal Cables 8-1 Parts Li st 8-1 Powe r Req uire ment s for th e [...]

Content s v Cisco T elePresen ce System 3000 OL-14521-01 Remo vin g the Cam era Cluste r 11-4 Replac ing a Pl asma Displa y—Part Nu mber CTS- DISP-65- GEN4= 11-6 Requir ed Infor mation , Tools, and Equipme nt 11-6 Powe ring Off t he S yst em 11-7 Removing Audi o Comp onents 11-7 Remo vin g the Cam era Cluste r 11-7 Removing the Left Ta blet op Do[...]

Cont ents vi Cisco Tele Presence Syste m 3000 OL-14521-01 Requir ed Infor mation , Tools, and Equipme nt 11-30 Removing and Repl acing a Tab le T op Se ction 11-30 Parts Li st Sorte d by Carton A-1 Overvi ew A-1 Carton 1 of 44: Mech anical Accesso ry Kit, CTS 3K-ACC-KI T, 53-285 5-xx A-1 Carton 2 o f 44: Camera Asse mbly, 8 00-284 87-xx , CTS3K -CA[...]

Content s vii Cisco T elePresen ce System 3000 OL-14521-01 Carton 32 of 44: Camer a Targe t, 6 9-1674- xx, CTS - CAM-TOOL A-10 Cart on 33 of 44 : Dis play Stru ctur e Cro ssba rs, 69 -16 23- xx, CT S3K- STR UCT URE A-11 Carton 34 of 44: Privacy Pa nels, 69- 1629- xx, CTS3K- STRUCTU RE A-11 Carton 35 of 4 4: Disp lay Structu re, 69 -1622 -xx, CTS3K-[...]

Cont ents viii Cisco Tele Presence Syste m 3000 OL-14521-01[...]

ix Cisco T elePresen ce System 3000 OL-14521-01 Preface Revised: October 31, 2008, OL- 14521-01 Introduction The Cisco T ele Pr esence 300 0 Assembly Guide outline s the steps and best p ract ices fo r as sembling and installing the Cisco T elePresen ce 3000. This guide is intende d primarily for install ers of the Cisco T elePresence Syste m 3000.[...]

x Cisco Tele Presence Syste m 3000 OL-14521-01 Preface Obtaining D ocumentat ion, Obtai ning Suppor t, and Secur ity Gui delines Ti p Means the inf ormation cont ains useful tips. Obtaining Do cumentation, Obtaining Support, and Security Guidelines For informat ion on obtai ning docu menta tion, sub mittin g a service re quest, an d gathering addit[...]

CH A P T E R 1-1 Cisco TelePre sence System 3000 OL-14521-01 1 Overview Revised: October 31, 2008, OL- 14521-01 Chapter Organization Chapter 1, “Overview” (this chapter) Provides c hapter organization and co ntent of th is do cument and i ncludes a n overview of the assemb ly steps y ou pe rform. Chapter 2, “B uilding the Disp lay Assembly”[...]

1-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Chapter Organiza tion • Each element is desc ribed using one or mo re ill ustrat ions. T he el ements are: – Camera assembly - attach es t o the ce nter Di spla y struc tur e – Microphone assembly - at tach to the thre e table s egme nts – T able Leg Wiring assembly - wi[...]

1-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 Overview Assembly Overv iew Figu re 1 -1 View of an As semb led C isc o T elePresen ce System 3 0 0 0 Assembly Overview Perform the follo wing steps to install a CTS 3000: Step 1 Build the display assembly . See Chap te r 2, “ Buil din g t he Dis pla y Assem bly” for more i nformat ion. [...]

1-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Convention s and Te rminology c. Inst all the I/O Mod ules for th e table le g power an d Ethern et conn ections and connec t the Eth ernet cable s. Se e Step 2 and Step 3 in Ch apte r 7, “ As se mbli ng th e R ema ini ng Cis co T eleP res enc e Elements ” to install the I/O[...]

1-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 Overview Tools and Eq uipme nt List Figur e 1 -2 Cable Connection La beling S ystem Tools and Equ ipment List T o assemb le the Cisc o T elePrese nce 3000, you need the following tools an d equipme nt: Uncr ating an d Unpa ckin g: • Claw hammer or smal l pry bar • Larg e Phillips scre wd[...]

1-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Tools and Equ ipm ent List[...]

CH A P T E R 2-1 Cisco TelePre sence System 3000 OL-14521-01 2 Building the Display Assembly Revised: Februar y 10, 2010, OL-14521 -01 Parts List Key Part Description Part Number Qty Ctn Notes 1 Display st ructure 700-233 58-xx 3 35, 36, 37 (CTS3K -FUR - MAPLE) 32, 33, 34 (CTS 3K-M -T ABL E- G2) 2 Rear fo ot stabilize r 700-233 60-xx 6 17 3 Front f[...]

2-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Cautio n The disp lay stru ctures are unstabl e durin g assemb ly . Use c aution, a nd suppor t all struc tures as re quired . Cautio n Some system component s hav e metal and plastic ed ges with hard angles. T hese edges are e xposed until you comp[...]

2-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 2 Attach th e Codec Safety tra ys to the Front F oot stab ilizers . Note If you ordere d a Presen tation Cod ec, atta ch the lar ger tra y that comes with the Pres entation Codec packag e, pa rt no. 700-2 5301-x x, in t he ce nter d isplay . F[...]

2-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 3 Attach the Rear and Front Foot stabi lizers to the Display structur es. Figur e 2-3 Rear and F ront F oot stabiliz ers 201101 3 12 11 2 1[...]

2-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 4 Attach the left and right Display Shel f supports t o each Displa y structure. Figur e 2-4 Lef t and Righ t Displa y Shelf support s 201103 5 12 11 6 1[...]

2-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 5 Attach the D isplay T ilt br acket s to e ach Dis play st ructur e. Figur e 2-5 Displa y Tilt b rac k ets Note Do not tighten the Disp lay T ilt brack ets. Y o u will need to a djust them to le vel the Pla sma displ ays in Chapter 3, “ Moun[...]

2-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 6 Attach th e Camera Assem bly brack et to the center Display str ucture. Figu re 2-6 Cam era Ass emb ly bracket Note Th e Came ra Asse mbly bra cket atta ches to the ce nte r Disp lay stru ctur e. 201105 1 9 13 13[...]

2-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 7 Attach t he upp er and lower Suppor t crossba rs to t he left an d right Display structur es. Figur e 2-7 Upper and Low er Support cr ossbars Ti p Use the screw holes near est the ends of the Support cro ssbars. 201107 10 12 10 1 11[...]

2-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 8 Attach t he upp er and lower Suppor t crossba rs to the cent er Displ ay struc ture. Figur e 2-8 Upper and Low er Support cr ossbars 201108 10 12 10 1 10 10 11[...]

2-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 9 Position the three Disp lay structu res relati ve to the rear w all. Note Using the measur ements p rov ided i n Figure 2- 9 , there will be approx imately 3 inche s (8 cm) of space between the light reflector and t he wal l. These minimum d[...]

CH A P T E R 3-1 Cisco TelePre sence System 3000 OL-14521-01 3 Mounting and Leveling the Plasma Displays Revised: September 16, 2009, OL-1 4521-01 Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note Th e direc tions left and right re fer to the asse mbly a s you face t [...]

3-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Parts Li st Cautio n Some system component s hav e metal and plastic ed ges with hard angles. T hese edges are e xposed until you comp lete syst em assembl y . Use c aution w hen you m ove around the syst em dur ing assembl y to avoid conta ct with [...]

3-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Parts List Step 1 Hang the lef t, cent er , and ri ght Pl asma dis pla ys on t he Dis play struc ture cross bars Caution M ake sure the Plas ma disp lay Leveling feet rema in firmly sea ted on t op of t he Disp lay shelf supports. Figur e 3-1 The l[...]

3-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Parts Li st Step 2 Attach the Display shelves to t he Display shelf supports Figur e 3-2 At tac h the D ispla y she lves to the Dis play shelf s uppor ts Note The Display shelves are use d in this chapter for le ve ling purpose s only . The Display [...]

3-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Purpose of Levelin g the Plasma displays The three Pl asma display s act a s windo ws all owi ng a three- way vi ew into the r emote Cisco T elePresence conf erence ro om. The Disp lay shelf in fr ont of ea[...]

3-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Levelin g Goals Lev e ling the Display shelves and the Plasma d isplays, and aligning the seams of th e Display she lves with the edges of the Plasma displays insures that images displayed from the remote c[...]

3-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Step 5 The surface of the Display shelves should not obstruct any l ines of resolution. Use the Plasma display Le v eling f eet to raise o r lo wer the Plasma d isplays and ma ke s ure all line s of re solu[...]

3-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Step 6 Use the Plasma displa y Le veling feet t o le ve l the Pla sma display s along t he X ax is. Use the Display tilt bra ckets to le ve l the Plasma displays along the Y axis. Ti p Y ou should lev el th[...]

3-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Step 7 Align the ed ges of Pla sma d isplays The gap be tween Plas ma displa ys should be uniformly even from the t op edg e of the Plasm a display to the bo ttom ed ge. Y ou sh ould t ry to make the ga p a[...]

3-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Le veling t he Plasm a displays Step 8 Align th e seams of the Disp lay shelv es with the s eams between Plasma displa ys. Y ou may need to adjust the Plasma displa ys left to right so the seam create d between the edges of two Plasma di[...]

3-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Completing the Plasma display setup Completing the Plasma display setup Step 9 Apply t he Black Buffer strips Figu re 3-9 Ap ply t he Bl ack Buffer strips 201119[...]

3-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting and Leveling the Plasma Displays Completing the Plasma di splay s etup[...]

CH A P T E R 4-1 Cisco TelePre sence System 3000 OL-14521-01 4 Building the Lightin g Assembly Revised: September 16, 2009, OL-1 4521-01 Parts List Key Part Description Part Number Qty Ctn Notes 1 Lighti ng su pport b rackets 700-2 3749-xx 6 26 (CTS3 K-FUR-M APLE ) 23 (CT S3K -M-T ABLE -G2 ) 2 Support strut s 700-23752 -xx 6 26 (CTS3K- FUR-M APLE) [...]

4-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st 14 Refl ector bottom : top side 700-2 3827-x x 2 26 (C TS3K-FUR -MA PLE) 23 (CT S3K -M-T ABLE -G2 ) 15 Refl ector bottom : end 700-2 3828-x x 2 26 (C TS3K- FUR-M APLE ) 23 (CT S3K -M-T ABLE -G2 ) 16 Refl ector bottom spac er 700-2 4152-x x 2 26 (C [...]

4-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n Some system component s hav e m etal and plastic ed ges with hard angl es. These edges are e x posed until you comp lete s[...]

4-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 1 Assemble the six Suppor t stru ts and six Lighti ng Sup port br ackets. Figur e 4-1 Suppor t str uts and Lighting Su ppor t brac kets 2 27 1 31 201125[...]

4-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 2 Attach the left and ri ght outer Supp ort brac kets (from Figure 4-1 ) to the horizontal ba r on the left and right Display structures. Figur e 4-2 Left and Right out er Supp ort br ack ets (from Figu r e 4-1 ) Note There is no p hysical d [...]

4-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 3 Attach the four inne r Support bra ckets to the Supp ort crossb ars. Figur e 4-3 Fou r inner Suppo rt br ack ets (from Figu r e 4-1 ) Note There is no p hysical d ifference betw een the six Support bracket s assemble d in Figu re 4-1 . Any t[...]

4-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 4 Attach th e four En d struc ture bra ckets to the ends of the Suppo rt cross bars. Figur e 4-4 Fou r End str uctur e brac k ets 201128 3 31 31[...]

4-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 5 Attach th e three Refl ector botto m trays to th e Support br acket s. Figu re 4-5 Three R efl ector b ottom trays 201129 27 32 13 27 14[...]

4-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 6 Attach the t wo Reflector bottom spacers to join the three Refl ector bottom tray s. Figu re 4-6 T w o Re flecto r bottom spac er s 201 130 13 14 16 27[...]

4-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 7 Attach the l eft and righ t (v ertical) Reflec tor Bottom e nds t o the End Str ucture brack ets and att ach the complian ce sticke r to the left reflector bottom end. Figur e 4-7 Lef t and Righ t (v ert ical) Refle ctor Bot tom ends 27 15 [...]

4-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 8 Attach the Light Cup brac ket to the l eft and rig ht (v ertical) Reflecto r Bottom e nds. Figur e 4-8 Light Cup br ack e t 23 27 15 201 132[...]

4-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 9 Attach the three 5-foot Light f ixtures inside th e Reflector bottoms. Figur e 4-9 Thr ee 5-f oot Light fixtur es 24 24 27 13 24 32[...]

4-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 10 Attach the l e ft and righ t 4-foot Side Lig ht f ixtures to t he left and ri ght (v ertical) Refle ctor Bottom en ds. The power cords fo r the Side Light fixtures shou ld extend from the top of the fixture s ( Figure 4-8 ). Figur e 4-1 0[...]

4-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 11 Attach th e two center Met al T rim panels. Figur e 4-1 1 T wo cent er Metal T rim pa nels 12 9 201 135 31[...]

4-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 12 Attach the tw o side Meta l T rim panels. Figur e 4-12 T wo side Metal T r im pan els 34 10 31 201 136[...]

4-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 13 Attach the cen ter Pl astic Di ff user panel. Figur e 4-13 Cente r Plastic Dif fuser panel 201 137 4 31[...]

4-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 14 Attach the lef t and rig ht Plastic Dif fuser panels. Note The rounded c orner s of the left an d right Plast ic Diffuser pan els point outward. Figur e 4-14 Lef t and Righ t Plastic Dif fuser panels 201 138 7 6 31[...]

4-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 15 Attach the fo ur L- brack ets to the tw o (ver tical) e nd Plastic Dif fuser panels . Figu re 4-15 Four L - brackets 201139 5 31 8[...]

4-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 16 Attach the t wo (v ertical) Plastic D if fuser panels to the End Stru cture b rack ets. Figur e 4-16 T wo (v er tical) Plastic Diffus er panels 5 31 201 140 3[...]

4-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 17 Slide the Plast ic Dif fuser Panel br ace be tween the en d (ve rtical ) Plastic Dif fuser panel and the left and right Plastic Dif fuser panels. Note If th e diff user become s scratched, use a black felt- tip permanen t marker to cov er [...]

4-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 18 Attach the cent er Reflecto r top to the c enter Refle ctor bott om. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-18 C enter Refl ector top 17 1 3 27 201 141[...]

4-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 19 Attach the lef t and rig ht Refle ctor tops to the le ft and r ight Ref lector botto ms. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-19 Le ft and R ig ht Re flec tor tops 18 18 14 32 201 142 27[...]

4-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 20 Join the left, c enter , and rig ht Reflecto r tops with the l eft and right Ref lector T ransition p ieces. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-20 Le ft and Ri ght Refl ector T ransi tio n pie ces 201[...]

4-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 21 Attach the l eft and righ t (v ertical) Reflec tor en ds to the le ft and right (ve rtical ) Ref lector Bottom ends . Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-21 Le ft and R ight (vertica l) Refl ector e nds[...]

4-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 22 Attach the l eft and r ight c orner Reflecto r T ransition p ieces t o the Reflecto r tops . Note T ighten al l s cre ws from Figure 4-18 t hrough Figure 4-22 . The goal is to insure the reflecto r pieces for m a “seamle ss hood” arou[...]

4-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 23 Attach th e two Me tal T rim panels to the L-brack ets attached to the tw o (v ertical) Plastic Dif fuser panels. Note The se Metal T rim panels cove r the access opening us ed to route cables. Y ou may not w ant to attach these Met al T r[...]

CH A P T E R 5-1 Cisco TelePre sence System 3000 OL-14521-01 5 Building the Display Shelf Assembly Revised: Novembe r 30, 2009, OL-1 4521-0 1 Parts List Key Part Descr iption Part Numb er Qty Ctn Notes Display Shelf, Product ID CTS3K-FUR-MAPLE 1 Display shelf section: left 700-236 00-xx 1 45 2 Display shel f section: center 700-235 99-xx 1 45 3 Dis[...]

5-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List 3 Assembly Scr een Supports No pa rt num ber 2 1 These brackets migh t also be located inside of the assem bly cabi net. These br ackets are only requir ed if you u se a T ype 1 projec tor sc reen , part num ber 800-2 8681-x x. If your instal [...]

5-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Determining the Display Shelf Type Cautio n The she lf segment s are unstab le during asse mbly . Use cauti on, and suppor t all stru ctures a s require d. Cautio n Some system component s hav e m etal and plastic ed ges with hard angl es. These edges [...]

5-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Determining t he Displ ay Shelf Type – Display shelv es with a product ID of CTS3K-M- T ABLE-G2 use draw bolts to attach the sections. Figure 5-1 sh ows the att achm ent ha rdwar e di fference s. Figur e 5-1 At tac hment Ha rdw are D if f erences 205468[...]

5-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Disp lay Shelf Assembly, Pr oduct I D CTS3K-FUR -MAPLE Building the Displa y Shelf Assembl y, Product ID CTS3K-FUR- MAPLE Step 1 Attach the Display shelf hardw are to the display sh elves . Figur e 5-2 Displa y Shelf Hard w ar e Note T he [...]

5-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Prod uct ID CTS3K-FUR-MA PLE Step 2 Attach the l eft Di splay s helf. Figur e 5-3 Lef t Dis play s helf 201148 1 13 13[...]

5-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Disp lay Shelf Assembly, Pr oduct I D CTS3K-FUR -MAPLE Step 3 Attach the center Dis play sh elf Figur e 5-4 Cent er Displ ay shelf Note Refer to Figure 5-2 to see the h ardw are us ed to atta ch the cent er Display shel f to the left Disp [...]

5-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Prod uct ID CTS3K-FUR-MA PLE Step 4 Attach the r ight Di splay shelf. Figur e 5-5 Right Displa y shelf Note Refer to Figure 5-2 to see the hardwar e used to attach the righ t Display shelf to the cente r Display shelf.[...]

5-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Disp lay Shelf Assembly, Pr oduct I D CTS3K-FUR -MAPLE Step 5 Attach the screen sup ports to th e access ory cab inets an d position, but do not attach, the cabi nets to the left and righ t attach ment bra ckets These sc reen su pports a r[...]

5-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Disp lay Shelf Asse mbly, Product ID CTS3K-M-TA BLE-G2 Building the Displa y Shelf Assembl y, Product ID CTS3K-M-TABLE-G 2 Step 1 Attach the Display shelf hardw are to the display sh elves . Figur e 5-7 Displa y Shelf Hard w ar e Note T he R[...]

5-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Step 2 Attach the l eft Di splay s helf. Figur e 5-8 Lef t Dis play s helf 201148 1 13 13[...]

5-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Disp lay Shelf Asse mbly, Product ID CTS3K-M-TA BLE-G2 Step 3 Attach the center Dis play sh elf Figur e 5-9 Cent er Disp la y shelf Note Refer to Figure 5-2 to see the h ardw are us ed to atta ch the cent er Display shel f to the left Disp l[...]

5-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Step 4 Attach the r ight Di splay shelf. Figur e 5-1 0 Right Dis play s helf Note Refer to Figure 5-2 to see the hardw are used to attac h the right Display shelf t o the center Display [...]

5-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Disp lay Shelf Asse mbly, Product ID CTS3K-M-TA BLE-G2 Step 5 Attach the screen supp orts to th e access ory cab inets an d position, but do not attach, the cabine ts to the left and righ t attach ment bra ckets These sc reen su pports a re [...]

CH A P T E R 6-1 Cisco TelePre sence System 3000 OL-14521-01 6 Building the Table Assembly Revised: October 29, 2009, OL- 14521-01 Parts List Key Part Description Part Number Qty Ctn Notes T able Assembly, Product ID CTS3K-FUR- MAPLE 1 T ablet op leg base 800-28454- xx 800-28628- xx (left) 3 1 41 2 Metal pa ckag ing brac e 700-24275- xx 4 25 3 Mold[...]

6-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Parts Li st Accessory Cab inet 1 Left acce ssory ca binet 700-236 01-xx 1 42, 43 2 M8 x 30 mm s crews 6 9-1706 -xx 14 1 3 Not use d 4 Right acc essory cabin et 7 00-23601- xx 1 42, 43 Miscell aneou s Table Ite ms Cabine t hole c overs 700-267 53-xx 14 1 Use these[...]

6-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Parts List Cautio n The tab le segments are unstabl e during asse mbly . Use caution, and suppor t all struct ures as require d. Cautio n Some system component s hav e m etal and plastic ed ges with hard angl es. These edges are e x posed until you comp lete sys[...]

6-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Determining t he Table Sect ion Type Cautio n T ab le eleme nts are he avy , an d metal edg es can be very shar p. Prot ect your hands and eyes from inj ury by wearing safety glov es and glasses. Cautio n In order to pre vent scratchi ng the tabl e tops, you shou[...]

6-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Building the Tab le Assembly, Product ID CTS3K-FUR-MAPLE Step 1 Remo ve the Meta l packaging b races f rom the Molded f oam b umpers. Figur e 6-1 Metal p ack aging brace s and th eir Molde d f oam bump e[...]

6-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 2 Asse mble the fou r Molded foam bu mpers and the four T able leg bases. Note The leg base with only one top ri ght attachment bracket is the left-win g leg (see Figure 6-10 ). The other three le gs[...]

6-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 3 Attach the Right -wing tablet op sec tion to the r ight Accessory Cabine t bracket . Figur e 6-3 Right-wing tab leto p section 201154 15 4[...]

6-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 4 Attach the r ight T able se gment. a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece. M ake sure you scr ew the two halv es of t he Cam Lock rod equa lly into t h e cente[...]

6-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 5 Attach the r ight-m ost T able L eg. Figur e 6-5 Right-most T able Leg 15 1 3 201156[...]

6-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 6 Attach the c enter T able se gment . a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece. M ake sure you scr ew the two halv es of t he Cam Lock rod equa lly into t h e ce[...]

6-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 7 Attach the Right- center T able leg. Figur e 6-7 Right-cent er T able leg 15 1 3 201158[...]

6-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 8 Attach the l eft T able se gment. a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece. M ake sure you scr ew the two halv es of t he Cam Lock rod equa lly into t h e cente[...]

6-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 9 Attach the l eft c enter T able l eg . Figur e 6-9 Lef t cent er T able leg 15 1 3 201160[...]

6-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 10 Att ac h the left -m os t T ab le leg . Note The left-most T able leg is dif ferent from the other three table le gs. It has only one flange on the right side of the le g, to attach to the left T[...]

6-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 11 Attach the tab le door . Figur e 6-1 1 T able Door 201162 11 16[...]

6-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 12 Using scissors, complete ly remov e one of the four webbed belts from the ta ble hinge safety stra p using Figure 6-12 as a re ferenc e; then, install the safety str ap and the “pl ease close ?[...]

6-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building t he Table Assembly, Prod uct ID CTS3 K-FUR-MAPLE Step 13 Attach the Acces sory cabin ets to the left and rig ht attachmen t brac kets and cov er the visib le scre w holes in the cabinet body with th e cabinet hole cov er . Figur e 6-13 A ccessory ca b[...]

6-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Building the Tab le Assembly, Product ID CTS3K-M-TABLE-G2 Step 1 Remo ve the Meta l packaging b races f rom the Molded f oam b umpers. Figur e 6-14 Metal pac kaging br aces and their Molde d f oam bump[...]

6-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 2 Asse mble the fou r Molded foam bu mpers and the four T able leg bases. Note The leg base with only one to p right attachment bracket is the left most tab le leg (se e Figure 6-25 ) . The o the r [...]

6-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 3 Assemble the I/O modules for the outside left and outside right molded foam bu mpers. The outsi de left an d outside right molde d foam bumpers only have one I/O mod ule eac h. The inner molde d[...]

6-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 4 Assemble the I/O modules for the inner molded foam bumpe rs. Note St eps f or rou tin g th e Ethe rnet an d power ca bles are in Cha pter 8, “Routing Po wer and Sig nal Cable s. ” Note Th e fl[...]

6-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 5 Attach the ri ght wing ta bletop sec tion to th e right Acc essory Cabin et bracket. Figur e 6-18 Right Wing T ablet op Sectio n 12 205539 15 4 10[...]

6-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 6 Attach the r ight T able se gment. a. Make sur e you tighte n the draw b olt evenly on b oth sides . b. While a draw bolt is bein g tightene d, ho ld the t able edg es toge ther to avoid dama ge t[...]

6-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 7 Attach the r ight m ost T able Le g. Figu re 6-20 Ri ght M ost T a bl e Leg 15 15 204140[...]

6-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 8 Attach the c enter T able se gment . a. Make sur e you tighte n the draw b olt evenly on b oth sides . b. While a draw bolt is bein g tightene d, ho ld the t able edg es toge ther to avoid dama ge[...]

6-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 9 Attach the r ight c enter T able l eg . Figur e 6-22 r ight cente r T able leg 15 15 204141[...]

6-27 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 10 Attach th e lef t T able s eg ment. a. The dra w bolt s ha ve tw o halv es that scr e w into a center p iece. b. While a draw bolt is bein g tightene d, ho ld the t able edg es toge ther to avoid[...]

6-28 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 11 Attach th e lef t cent er T able le g. Figu re 6-24 Le ft center T abl e le g 15 15 204143[...]

6-29 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 12 Attach th e left most T able le g. Figur e 6-25 lef t Most T able Leg 15 15 204144[...]

6-30 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 13 Attac h the Microp hones t o the left , right, and c enter T able segme nts. The cent er Mic ropho ne cable must be seated i n the cabl e channe l on the und erside of the cent er T abl e segme[...]

6-31 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, Product ID CTS3K-M-TAB LE-G2 Step 14 Attach t he table door to the ta bletop sections and at tach the “pleas e close ” label to the un dersid e of the table door . Figur e 6-27 Lef t Connec ting T abletop Section 204145 11 15 29[...]

6-32 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Tabl e Assemb ly, Product ID CT S3K-M-T ABLE-G2 Step 15 Attach the Acces sory cabin ets to the left and rig ht attachmen t brac kets and cov er the visib le scre w holes in the cabinet body with th e cabinet hole cov er . Figur e 6-28 A ccessory ca [...]

CH A P T E R 7-1 Cisco TelePre sence System 3000 OL-14521-01 7 Assembling the Remai ning Cisco TelePresence Elements Revised: March 5, 201 0, OL-14521-01 Parts List Key Part Description Part Number Qty Ctn Notes Camera and Camer a Assembly ( Fig ure 7-1 ) 1 Camera assembly 68-2900-0 6 1 2 8 M8 x 20 mm scr e ws 48-2273-x x 4 1 Used to attach to the [...]

7-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Ether net an d Pow er I/O Conn ecti ons 1 I/O bla nk: large 700-23806- xx 2 1 2 I/O bla nk: smal l 700-23807- xx 6 1 3 I/O modu les: power/Ether net 74-xxxx-x x 6 1 Part num ber chan ges per c ountry or regi on. Refer to[...]

7-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List 2 Priv a cy panel: center 700-23334- xx 1 34 (CTS3K-F U R-MAPLE) 31 (CTS3K-M - T ABLE-G2) Product s sh ipped to Chin a use a di ff erent priv a cy panel. See “Regi on- and Country- Specific Equipm ent” for the part numb[...]

7-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st 3 Speaker bo ard center 700-23603- xx (CTS3K-F UR- MAPL E) 69-1836-0 1 (CTS3K-M -T ABL E- G2) 14 4 4 Speaker cab le 37-0849-x x 3 1 5 Lev eling f oot 51-4540 -xx 6 1 6 Speaker bo ard kno bs (MDF F asteners 6 39 Included [...]

7-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Note Note that th e ke y numbers r estart for e ach elem ent. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note Th e direc tions left and right re fer t[...]

7-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 1 Place the ass embly o ver the cent er display , then atta ch the Camera As sembly to th e Camera Assembly bracket . For clarity , the d isplay has been remo ved from the illustrati on in Figure 7-1 . Note Th ere a[...]

7-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 2 Assemble the I/O Modul es for the outside left and outsi de right Molded F oam bu mpers. The outsi de left an d outside right Mold ed Foam bumpers on ly have one I/O Module ea ch. The i nner Molded F oam bum pers ha [...]

7-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 3 Assemble the I/O Modul es for the two inner Molded Foam b umpers. The outsi de left an d outside right Mold ed Foam bumpers on ly have one I/O Module ea ch (see Figure 7-2 ). The inne r Molded Foam b umpers ha v e[...]

7-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 4 Attach th e Projector to the Proje ctor mounting brac ket. Figur e 7 -4 Pr oject or Assembly 201168 2 1 5[...]

7-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 5 Attac h the Projecto r bra cket to t he under side of the cente r T a ble segm ent. Note • The brack et slides betwe en two ro ws of screws. Scre w the six scre ws with washers into th e underside of the center[...]

7-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 6 Attach th e VGA mod ule to the center T able segme nt. The VGA mod ule suppor ts the VGA peripher al cabl e when not in use. Figur e 7 -6 V GA Module 3 201170[...]

7-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 7 Attach the cen ter Pri vac y panel. Figur e 7 -7 Pr ivac y P anel Asse mbly 2 5 Rotated for c larity 201171[...]

7-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 8 Attach the lef t Pri vac y panel. Figur e 7 -8 Pr ivac y P anel Asse mbly 1 5 201172 Rotated for c larity[...]

7-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 9 Attach the ri ght Priv acy panel. Figur e 7 -9 Pr ivac y P anel Asse mbly 3 5 201173 Rotated for c larity[...]

7-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 10 Attach t he ri ght-win g Priv acy pane l. Figu re 7 -10 P r ivacy P a nel A ssem bl y 4 5 201174[...]

7-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 11 Attach th e Cable man agement ba rs to the three Codecs. Figu re 7 -1 1 Co dec As sem bly 1 5 3 201175[...]

7-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 12 Attach th e Codec attach ment brackets to the three Cod ecs. Figu re 7 -12 Co dec As sem bly 201176 1 4 5 6[...]

7-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 13 Attach the three Codecs to the Display structure Front foot stabilizer s. Note If you ordere d a Presen tation Codec with yo ur T elePresence system , refer to the Cisco T elePr esence Har dwar e Optio ns an d U[...]

7-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 14 Attach the au dio/vi deo extension uni t to its bracket. Figur e 7 -14 A udio/Vide o Ext ension Unit a nd Br ac k et 2041 83 2 1[...]

7-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 15 Attac h the audio/ video extension unit to th e rear of the di splay asse mbly . Figur e 7 -15 A udio/V ideo Ext ension U nit 3 5 1 204147[...]

7-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 16 Attac h the Speaker board fe et to the Spea ker boar ds. The fe et shou ld ang le towar ds th e rear of the D ispl ay st ructu re . Figu re 7 -16 Sp eaker Asse mb ly 201178 7 5 9 8 3 2[...]

7-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 17 Attach th e Speake r board s to the Speake r board brack ets on the unde rside of the Display shel ves. Figu re 7 -17 Sp eaker Asse mb ly[...]

7-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 18 Attach th e Speakers to the Speak er boards. Figu re 7 -18 Sp eaker Asse mbly 1 6 201 179[...]

7-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 19 Attach th e Projector screen to the front of the system . Note Ple ase r efer to your C isco T elePresence Project or Screen Ass embly manual for th e e xact proc edures used to b uild the project or screen. Th [...]

7-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 20 Attach the auxili ary con trol unit to its b racket using 5 mm scr ew s; then, attach th e unit and brack et to the r ear of the d isplay as sembly . Figu re 7 -20 A uxil iar y Con trol Unit 1 3 5 20414 8[...]

7-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 21 Assemble the Lar ge Camera T arget. When yo u slide the C amera ta rge t into the fr ame, ma ke sure the t arg et is center ed in th e frame betw een the ver tical lines at the top and botto m of the targ et. Fi[...]

CH A P T E R 8-1 Cisco TelePre sence System 3000 OL-14521-01 8 Routing Power and Signal Cables Revised: December 8, 201 1, OL-14521-01 Parts List Cautio n Do not power on the PDUs an d auxi liary cont rol uni t until you conn ect and ro ute all th e cable s. Key Part Description Part Number Qty Ctn Notes 1 Power distribution units 74-4787-01 4 1 2 [...]

8-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Cautio n Use ca re whe n you r oute t he power ca bles fr om th e PDUs. Do n ot bend the cable s immed iate ly aft er they exit the PD Us and be su re tha t the cable does no t pull on, or cause any stra [...]

8-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-1 PDU instal lation t o lef t accessory cabine t Step 2 Attach the rig ht PDU to the right Ac cessor y cabin et and con nect th e po wer cord for the PDU in to the power outlet. 201182 1[...]

8-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Figur e 8-2 Right-side P DU insta llation t o r ight accessory ca binet Step 3 Attach t he ce nter PDU to the c enter pri vac y panel and connect the po wer cord for the PDU int o the p o wer outlet. 1 20[...]

8-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-3 T able assembl y PDU at tachmen t t o the c ent er Pr iv acy panel Note Th e PDU power cable shoul d extend from the ri ght side. 1 201184[...]

8-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Step 4 Route th e power cables for the tabl e leg foam bumpe r I/O module s and the projec tor . Figur e 8-4 Routing P ow er Cables f or I/O Modules and Pr ojector Note The six jumper cords fro m the I/O [...]

8-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Step 5 Rout e the signal cab les from the tab le assemb ly . Figur e 8-5 Routing Signal cable s fr om the T able assemb ly Note Rou te the T able Leg Sig nal cable s behi nd the Displ ay struct ure, al ong[...]

8-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Figur e 8-6 Routing the Codec P ow e r Cables Step 7 Connect th e Cisco Unified IP Phon e, VGA periphe ral, and proj ecto r HD video cabl es. Note Th e VGA Pe riphe ral c able is the free- hanging cabl e [...]

8-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-7 Cabling the C isco Unifi ed IP Pho ne, D VI-to-V GA, and Pr ojector HD Vide o Cables Step 8 Connec t the micro phones to the micro phone c ables; then, connec t the micro phone c ables to th e [...]

8-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 c. Immedi ately c onnect the mi crophone to the codec o r audio/ video extension unit using the d iagra m in Figu re 8-8 . Figur e 8-8 Disc har ging E SD fro m the Micr ophone Cables a nd Connecting the [...]

8-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Step 9 Connect th e speaker ca bles usin g the following markings and co lors on the codec: • A single dot on a gre en backg round indi cates a ce nter speaker . • T wo dots on a w hite back ground i [...]

8-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Figur e 8-9 Cabling the Speak ers Ti p Befo re plu gging cabl es int o the C odec, l abel each o ne. F or exam ple, L eft Sp eaker , Center Speak er . Step 10 Conn ect t he follo wing cable s: • Attach[...]

8-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-1 0 Cabling the L ighting Asse mbly P ow er Cables an d A uxiliary Contr ol Unit-to-Pr ojector Ser ial Cable Ti p Before plugging the L ight fixtur e power c ables into the au xiliary contro l u[...]

8-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Step 11 Attach an d route th e po wer and signal cab les for the plasma disp lays. Note Connect the c enter plasma display to “UNSWITCHED ” outlet of the the auxil iary con trol unit. Figur e 8-1 1 C[...]

8-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Step 12 Con nect th e ca mer a ass embl y cabl es. Figur e 8-12 Cabling the C amer a assembly Note Th e came ra clust er ca n experien ce rad io fre quency inte rfer ence issues if the ca mera Et hern et [...]

8-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Step 13 Attach th e ferrite co res to the en ds of all six cam era cables ( both the video and Ether net cable s, 12 fe rrite cores total). Wrap th e cable s aro und the ferrit e as sh o wn in F igu re 8[...]

8-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-14 Connecting the Codec Signal Ca bles Note Figur e 8-14 displ ays the re ar view of the Cisco T ele Presenc e System 300 0. Left and ri ght are reversed. 5 5 6 6 204166 A uxilier y Video Out Ca[...]

8-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Cable routing f or the auxiliary co ntrol unit and pr ojector for a stan dard CTS 3 000 installati on is shown in Figu re 8-15 . Figur e 8-15 Cable Routing fo r Standard CTS 3000 12 12 10/100 NETWORK POR[...]

8-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Cable routing fo r a standard CTS-3000 in stallation that use s a presentation co dec is sho wn in Figure 8-1 6 . Refe r to the “Op tions f or the Cisco T e lePres ence Sy stem 3000” chap ter of the C[...]

8-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Note Because you n eed to split the video signal b etween t he proje ctor and a ny additiona l video output, you must purchase at least one extra cable t o connect optional ex ternal display (s). Cables [...]

8-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-17 Cabling Diag ram : CTS 3000 Installations w ith an Ext e r nal Display a nd Document Ca mer a Step 16 (Option al) If your install ation uses an extern al displa y or a docume nt came ra with [...]

8-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000 Refer to the “Options f or the Cisco T elePres ence System 3000” chapter of the Cisco T elePr esence Har dwar e Optio ns an d Upgr ade Gu ide fo r mor e inf ormatio n abo ut t he pr esentat ion code [...]

8-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Power Requireme nts for the Cis co TeleP resence 3000 Figur e 8-18 Cabling Diag ram : CTS 3000 Installat ions with a P r esentati on Codec , Ext er nal Displa y an d Docum ent Camer a 205783 12 12 10/ 100 NET WO RK PO R TS RESET SERI AL PO RTS Document Camer[...]

8-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Power Require ments for the Ci sco TelePre sence 3000[...]

CH A P T E R 9-1 Cisco TelePre sence System 3000 OL-14521-01 9 Firs t-Time Setup Revised: December 8, 201 1, OL-14521-01 After you have assembled t he Cisco T elePrese nce Sy stem (C TS), you set up the in dividual system compone nts (such as displays a nd camera s) usin g Hardware S etup , locat ed under T roubleshooting in the CTS Administrati on[...]

9-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Loading CTS Admi nistration Software Note M ake sure that you p ower on all codecs withi n 30 second s to avoid power on detectio n failu re. After yo u turn on the co decs, th e displa ys associa ted with each codec bec omes acti ve. CTS dis plays green ch eck marks on a[...]

9-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Loading CTS Administration Software Figur e 9-2 Sys tem IP A ddr ess Note If the IP add ress tha t displays i s 192.16 8.100. 2, the CTS-3000 c ould no t cont act the DHCP server o r your system does not us e DHCP . If you r network does not use DHCP , navigate to Configurat[...]

9-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Configuring an A lternate TF TP Server (Op tional) Step 4 From the Cisco IP te lephone welco me pag e, pre ss Next . The system r eboots. Note Th e system migh t reboot sev eral times duri ng the initi al start up process. Step 5 Open a browser on a com puter that is conn[...]

9-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Step 2 From T roubleshooting , cho ose Hard war e Se tup to initially se t up the componen ts in the Cisco T elePrese nce system. Cisco sug gests that you set up CTS comp onents in the following order : • Setting Up the Di splays, page 9-5 • [...]

9-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Troub leshootin g Disp lays Use Ta b l e 9-1 to tro ubleshoot p roblems with the images on t h e displays . Ta b l e 9-1 T r oublesho oting Char t for Displa y Pr oblems Prob lem Possible Cause Action Cisco TelePresence 3000/3200 only Pow er- on [...]

9-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Setting Up the Camer as The cam eras are set up co rre ctly when ima ges are cent ered an d in f ocu s on the disp lay s cree ns and the white ba lance has be en conf igured . The ha rdw are se tup so ftwa re pro vides a came ra Auto Adjust featu[...]

9-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Figur e 9-3 Camer a T ar get Assembly Step 2 Attach t he large target t o the unde rside o f th e cent er t able sec tion by placi ng the round pads on the underside of the clam ps into recesses that are drilled und er the table. Ti p Y ou can fe[...]

9-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents The targe t pat tern s houl d face th e ca mer a. Step 3 In the Cisc o T elePre sence administ rative GUI, navigate to Hardwar e Setup > T roubleshooting > Cameras . Step 4 Click Start to beg in the camera setu p. Y ou s hould se e outpu t [...]

9-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Figur e 9-4 Camer a Adjust ment Scr ews Figur e 9-5 Cor rect Camer a T ar get Alignmen t—Cent er Displa y 201205 Lens Right adjust screw Left adjust screw Up/down adjust screw Camera rotation screw Camera rotation screw Red pl us s ign within [...]

9-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents d. Place the small tar get on the table in fr ont of the lar ge target, and adjust th e focus b y completin g the steps in the “Foc using the Cam era” sect ion on page 9-13 . e. Remo ve the lar ge target fro m the center part of th e table, [...]

9-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components i. Make manual ad justmen ts to the ca mera foc used on the tar get and th e zoom rin g on the camer a to make t he follo wing adjustments to t h e camera: • Align the red plus sign to the plus sign in the middle of th e target. • Align the [...]

9-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Focusing the Camera T o focus the cameras using the lar ge and small targets, complete the follo wing steps: Step 1 Place the s mall tar get on center of t he table, in front of the center camera . Step 2 Arran ge the lar ge tar get f i v e feet[...]

9-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 5 Adjust the focus on the camera b y perform ing the follo wing step s: a. Loosen th e thum bscrew for the len s focus ring. The rin g is labele d “N-8 ”. Figur e 9-1 0 Loca tion of F ocus a nd Zoom Rings Use th e thum bscre w (or 0 .9 [...]

9-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Cautio n Do not ov ertighten the scre ws, or use a po wer scre wdriv er to tighte n the scre ws. The recommen ded torque for the screws is 0.8N .m (7 inc h-poun ds). In additi on, make sure that you use scr ews of the correct l ength (20 mm). Ov[...]

9-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Troub lesho otin g Came ras Use Ta b l e 9-2 to troublesh oot prob lems with camer as. Ta b l e 9-2 T r oublesho oting Char t for Camer a Pro blems Prob lem Possible Cause Action Cisco TelePresence 3000/3200 only Camera image appe ars on the wro[...]

9-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Setting Up the Sp eakers The speake rs are set up co rrect ly you can hear sound clea rly from ea ch one . Y ou can cho ose whet her you want to cycle thr ough the spe akers aut omatic ally or manual ly . • Click Speaker s on the Hardware Setu[...]

9-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 4 Calibra te the micro phones by clic king the Micr ophone Calibration but t o n . Note Th e room must be comp lete ly quiet to proper ly cal ibrate microph ones a nd ensure tha t cam era swit ching is prop erly ena bled. Ti p Before clic k[...]

9-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents Setting Up the Projector This se ction contai ns the steps t hat y ou pe rform t o set up the proje ctor and incl udes th e fo llowing sections: • Project or Setup W ith an Auxiliary Control Unit, page 9-19 • Project or Setup for Systems W i[...]

9-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Note Changing these set tings allo ws a projecto r to be monitored b y SNMP when the projector is in an i nacti ve state. If a proje ctor lamp fai ls, SNMP does not properly re port the failu re from an inacti ve project or until you complete th[...]

9-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents • Click the VGA radio b utton to test i nput from a V GA de v ice • Click the Do cume nt ca mer a radio b u tton to test input from the docu ment camera If the input im age is displ aying correc tly , you shoul d see an image projec ted on t[...]

9-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 3 Set the display to display right- side up b y completi ng the f ollo wing steps: a. Press the MENU key on the remot e contr ol. Note The menu screen will appear upside do wn and re versed. If the image is right-side up, contin ue to Step [...]

9-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents d. Press the Right Ar row key an d se lec t Normal . e. Press th e Left Arrow key to confirm your se lecti on. Step 9 Eliminate o verscan by completing th e follo wing steps: a. Press the Up Arro w and Down Arro w keys and high light Pictur e ad[...]

9-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 12 Select the screen size by c ompletin g the f ollo wing steps : a. From th e ma in me nu, us e th e Up Arro w and Do wn Arrow ke ys to highligh t the Scr een fu nct ion. Press the Right Ar row key to select t he Scr een sub- menu. b. Use [...]

9-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Settin g Up CT S Com ponents If the input im age is displ aying correc tly , you shoul d see an image projec ted on the projec tion su rface. Step 17 If the image is out of focus or is too small, use the projecto r focus ring to focus the image and use the zoom le ver to c [...]

9-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Note Th e Cisco T elePresence System can displa y information from mul tiple input de vices during a meeting; if multiple inp ut dev ices are sending inform ation, the projec tor displays the inpu t from the last pres entati on de vice sending i[...]

CH A P T E R 10-1 Cisco TelePre sence System 3000 OL-14521-01 10 Use & C are Guide Revised: October 31, 2008, OL- 14521-01 Maintaining the Tabletop Cautio n W axin g or rubbi ng the surface with a ny type of abr asiv e is not re commen ded. • F or genera l daily ca re - use a damp ened cloth with clean w ater . • To r e m o v e d i r t - us[...]

10-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 0 U se & Car e Gui de Main tain ing the P roj ecto r Maintaining th e Projector Note Refer to the Pro jector User Guid e inclu ded wi th you r proje ctor f or mainte nanc e iss ues such as cl eaning the pro jector len s. T o replace th e proj ector lamp, s ee the “Repl acing the Pro[...]

CH A P T E R 11-1 Cisco TelePre sence System 3000 OL-14521-01 11 Field-Replaceable Unit Guid e Revised: October 29, 2009, OL- 14521-01 This chap ter de scribe s the steps you perfo rm to rep lace the field -repla ceabl e units (FR Us) for the Cisco T elePres ence syst em and includ es the follo wing sections : • Complete List of Spares for the Ci[...]

11-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Complete List of Spares fo r the Cisco Te lePresenc e Syste m 3000 T able 1 1 -1 L ist of FIe ld-Replacea ble Un its for the Cisco T elePr esence Sy st em FRU Part Number Descriptio n CTS32 -CA M-LEN S= Camer a l ens u se t o upgr ade a Ci sco T el ePres ence[...]

11-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Complete List of Spa res for th e Cisco TelePr esence Syste m 3000 CTS-DI SP-BKT -1K 3K Display bra cket for the Cisco T elePres ence System 1000 and 3000 CTS-JUMPER -CORD= T elePresence Po wer Jumper Cor d (cord bet ween electr ical compon ents and th e Pow [...]

11-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Camera Cl uster—Part Numbe r CTS3K-CAM-CLST-G 2= Replacing the Ca mera Cluster—Part Numb er CTS3K-CAM- CLST-G2= Required Info rmation, Tools, and Equipmen t T o r emove and re place the camer a clu ster fo r th e Cisc o T el ePresenc e 3000,[...]

11-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repla cin g the Cam era C luste r—Par t Numbe r CTS3 K-CA M-CL ST-G2 = Note Th e direc tions left and right re fer to the asse mbly as you fac e it. Step 1 Remove the top ca mera hood by r emoving t he screws th at sec ure it to t he bra cket. Step 2 Remove[...]

11-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Replacing a Plasma Displa y—Part Number CTS-DISP-65- GEN4= Required Info rmation, Tools, and Equipmen t T o disasse mble an d reassem ble port ions of the Cisco T ele Presen ce 3000 to replace a d[...]

11-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Powering Off the System Po wer of f the system by turning the po wer switches to the O ff position on th e two left PDUs, sin gle right PDU and, if presen t, the PDU or auxiliar y control unit [...]

11-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Removin g the Left Ta bletop Do or Section The l eft tab letop doo r sec tion must be re moved to al low room to m ove the Plasma displays in and out of the wor k area . Note M ake sure to retain al[...]

11-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= See Chapter 8 , “Routing Power and Signal Cab les” , for cable lo catio ns and re fere nce. Step 2 Detach th e display s creen’ s powe r cable from the displ ay and from the correct PDU. [...]

11-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Figur e 1 1 -2 Attac hing the Displa y Mountin g Bra ck et Step 10 T urn the powe r switch on the Plasma display to the On positio n. Step 11 The rear of the replacemen t display will ha ve either [...]

11-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Figur e 1 1 -3 P o wer a nd Signa l Connections fo r Displa ys with HDMI Connec tors 20 8 400 Codec DMP On/Off S witch A C inlet[...]

11-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN4 = Figur e 1 1 -4 P o wer and Signa l Connections fo r Displa ys with D VI Connectors Step 12 Hang th e replacemen t Plasma disp lay . Step 13 Plug in the si gnal cabl e to th e corr ect cod ec. See C[...]

11-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Plasma Displa y—Pa rt Numb er CTS- DISP -65-G EN4= Step 18 Hang th e speak er boar ds. See Chapter 7, “ Assembling the Remain ing Cisco T elePresence Elements” for more informa tion. Step 19 Po wer on the system b y turning the p o wer swi[...]

11-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Speake r—Part Number CTS- LDSPKR= Replacing a Spe aker—Par t Number CTS-LDSPKR= Required Info rmation, Tools, and Equipmen t T o rem ove and replace a speaker fo r the Ci sco T e lePresenc e 3 000, yo u need t he following i nformati on, tool[...]

11-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repla cing a S peaker —Part N umber CTS-LDSP KR= c. After yo u ha ve cr eated a g ap of appro ximatel y 1/2 inch (1 centimete r) be tween the scr een and the displ ay shelf, d etac h the hol es on the t op scree n from th e loca ting pins o n the unde rsid[...]

11-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Repl acing a Codec U nit—Part N umber CT S-CODEC-PRI -G2= (Pr imary Codec) or CTS-CODEC-SE C= (Sec ondary Cod ec) Replacing a Codec Unit—Part Nu mber CT S-CODEC-PR I-G2= (Primary Codec) or CTS- CODEC-SEC= (Secondary Codec) Required Info rmation, Tools, a[...]

11-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl aci ng a Co dec U nit—P art Numbe r CT S-COD EC-PRI -G2 = (Prima ry Co dec ) or CT S-CODE C-SE C= (Se conda ry See Chapter 7, “ Assembling the Remain ing Cisco T elePresence Elements” f or addi tional inf ormation. Step 5 Remove the co dec from t [...]

11-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Micr ophone—Pa rt Numbe r CTS-MIC= Replacing a Micro phone—Part Number CTS-MIC= Required Info rmation, Tools, and Equipmen t T o remo ve an d repl ace a micro phone for the Cisc o T elePresence 3 000, you ne ed the follo wing inform ation, to[...]

11-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replaci ng a Mic ropho ne—Part Num ber CTS -MIC= Step 3 Check th e cable on the mic rophon e to be repla ced an d comple te one of th e following procedure s to comp lete t he m icropho ne r eplac emen t. • If the micr ophone cabl e is o ne pie ce an d r[...]

11-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Micr ophone—Pa rt Numbe r CTS-MIC= Step 13 Select Hardware Setup to verify the cam eras, displ ays, spe akers, and mi crophon es are wor king properly . Refer to the Cisco T elePr esence System Administrator's Guide for your sof twar e rel[...]

11-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacin g a Light Fix ture—P art Number CTS- LIGHT-FIX T= Step 13 Select Hardware Setup to verify th e camer as, displ ays, speake rs, and microp hones ar e working properly . Refer to the Cisco T elePr esence System Administrator's Guide for your so[...]

11-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Audi o/Video Ex tension Unit— Part Num ber CTS-AV-EXP= Replacing a Light Fi xture Step 1 Po wer of f the lights by tu rning the po wer switch to the Of f position to the po wer unit that contr ols your lights. Note Depending on your insta lla[...]

11-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacing the Cisco IP Phone—P art Numbe r CP-7975G-C TS= Cautio n Make sure all system po wer is turned o ff before b egi nning this disa ssembly . Step 2 Remove the cables from the audio/ video extension u nit. La bel eac h ca ble wi th ma sking t ape fo[...]

11-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Pro jector Lam p—Part Number CTS-PR JTR-BL-GEN1 = or CTS-PRJTR -GEN2-CH (Ch ina) Replacing the Projec tor Lamp—Part Number CTS-PRJTR-BL-GEN1= or CT S-PRJTR-GEN2-CH (China) A likely cause of a malfunctio ning project or is a bu rnt-out proje[...]

11-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acin g the Proje ctor— Par t Num ber CTS-PRJ TR- GEN1 = Note Y o u may need to rock th e unit back ward and forward to unse at it. Step 9 Install th e repla cement lam p module and s ecure th e module and cov er with th e scre ws. Step 10 Place t he p[...]

11-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a PDU—Part N umber CTS-PWR-PDU= Step 9 Reattach the assem bly to the underside of the tabletop. Step 10 Reattac h the VGA cable to the pr oject or . Step 11 Reattach the po wer cable to the projector . Step 12 If your system uses an auxilia ry co[...]

11-27 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacing the Auxiliary Control Unit—Part Number CTS-LIGHT-CTRL= Replacing the Auxili ary Control Unit—Part Numbe r CTS-LIGHT-CTRL= The auxiliary co ntrol unit is located in the center of the display assembl y . For more information abou t the aux iliary[...]

11-28 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Displ ay Shelf Replacing a Di splay Shelf The display shelv es are the table sec tions that sit directly belo w the display scree ns. Required Info rmation, Tools, and Equipmen t T o remo ve and replace a d isplay shel f, y ou need the foll o win[...]

11-29 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Rep laci ng a Dis play She lf Step 7 From the u nderside of th e display structure, rem ov e all t he scre ws that a ttach the d isplay she lves to t he display assembly . Note The Display shelves are atta ched indi vidually to the display structures as illu[...]

11-30 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Ta ble Top Sect ion Replacing a Table Top Section Complet e the se st eps to r eplace a tab le top sectio n. Required Info rmation, Tools, and Equipmen t T o remo ve and repl ace a tabl e top secti on, you ne ed the foll o wing too ls: • Medium[...]

11-31 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Tab le Top S ection Step 8 Remove the draw bolts or cam locks betw een the tab le top sec tions on the side that you moved. See Chapter 6, “Buildin g the T able Assembly” fo r the l ocation of the dr aw b olts or c am locks. Step 9 If requ i[...]

11-32 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Ta ble Top Sect ion[...]

A- 1 Cisco T elePresen ce System 3000 OL-14521-01 APPENDIX A Parts List Sorted by Carton Revised: February 1, 201 0, OL-14521- 01 Overview • Each carto n may contain multiple parts. Some of these part s are grouped together in kits. Each kit is a smaller box contained within the ‘master’ car ton. • Each kit box is ide ntif ied with an ID nu[...]

A- 2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 1 of 44: Mechanica l Access ory Kit, CTS3K -ACC-KIT , 53-2855-xx 78-1 7839- 05B0 Regula tory Compliance and Safety Inf ormation 1 N/A 79 -00 87 -02 ES D w ris t s tra p 1 N /A 69-1694 -03 700-238 25-03 T abl e hinge safet y stra p 1 Chapter 6 47-2 1001[...]

A-3 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 2 of 44: Camera Assembly, 800-28487-x x, CTS3K-CAM-CLUS T Carton 2 of 44: Camera Assembly, 800-28487-xx, CTS3K-CAM- CLUST Carton 3 of 44: Primary Codec , 800-30638-xx , CTS-CODEC-PRI-G2 N/A 74-xxxx -xx I/O m odules: p ower/Ethern et 6 C hapter 7 Refer to [...]

A- 4 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 4 of 44: Secondar y Codec, 800 -28202 -xx, CTS-CO DEC-SEC Carton 4 of 44: Secondary Cod ec, 800-28202-xx , CTS-CODEC-SEC Carton 5 of 44: Secondary Cod ec, 800-28202-xx , CTS-CODEC-SEC Carton 6 of 44: Projector, 74-4824-xx, CTS-PRJTR-GEN1 Carton 7 of 44[...]

A-5 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 9 of 44: Speake r, 74-4740-x x, CTS-LDSPKR Carton 9 of 44: Speaker, 74-4740-xx, CT S-LDSPKR Carton 10 of 44: Power Cord, 37- 08xx-xx, PWR- CORD10-xx Carton 11 of 44: Camera Bracket, 69-1627-xx, CTS3K-STRUCT URE Carton 12 of 44: Brackets, 69-1632-xx, CTS3K[...]

A- 6 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 13 of 44: Privacy Panel, Right, 69-1628-xx, CTS3K-ST RUCTURE Carton 13 of 44: Privacy Panel, Right, 69-1628-xx, CTS3K-STRU CTURE Carton 14 of 44: Front Foot Stabilizer, 69-1624-xx, CST3K-STRU CTURE Carton 15 of 44: Front Foot Stabilizer, 69-1624-xx, CS[...]

A-7 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 17 of 44: Displa y Structur e Rear Feet , 69-1625-xx, CTS3K-STRU CTURE Carton 17 of 44: Display Structure Rear Feet, 69-1625-xx, CTS3K-STRU CTURE Carton 18 of 44: Accessory Cab inet Brackets, 69-1630-xx, CTS3K-STRU CTURE Carton 19 of 44: Auxiliary Control[...]

A- 8 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Cart on 22 of 44: Plasma D isplay , 74 -4881- xx, CTS-D ISP- 65-G EN2 Carton 22 of 44: Plasma Displa y, 74-4881-xx, CTS-DISP-65-GEN2 Carton 23 of 44: Lighting Assembl y, 69-1613-xx, CTS3K- LIGHT- STR Carton 24 of 44: Projector Bracket, 69-1631-xx, CTS3K-STRU [...]

A-9 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 26 of 44: Lighting Assem bly, 69-1612-xx, C TS3K-LIGHT-STR Carton 26 of 44: Lighting Assembly, 69-1612-xx, CTS3K- LIGHT- STR Carton 27 of 44: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Kit ID Number Sub-Kit ID Number Part Number Part Description Qty Chapte[...]

A-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Cart on 28 of 44: Light Fi xture , 74- 5361- xx, CT S-LI GHT-FI XT Carton 28 of 44: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Carton 29 of 44: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Carton 30 of 44: Light Fixture, 74-5362-xx, CTS-LIGHT-FIXT Carton 31 of 44[...]

A-11 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 33 of 44: Display Struct ure Crossbars , 69-1623-xx, CTS3K-STRUCTURE Carton 33 of 44: Display Structure Crossbars, 69-1623-xx, CTS3K-STRU CTURE Carton 34 of 44: Privacy Panel s, 69-1629-xx, CTS3K-STRUCTURE Carton 35 of 44: Display Structure, 69-1622-xx, [...]

A-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 37 of 44: Display Structure, 69-1622-xx, CTS3 K-STRUCTURE Carton 37 of 44: Display Structure, 69-1622-xx, CTS3K-STRU CTURE Carton 38 of 44: Spare Fluoresc ent Bulbs for Lig ht Fixture, 74-5232-01, CTS-3000-SPR-BULBS Carton 39 of 44: Projector Screen, 7[...]

A-13 Cisco T elePresen ce System 3000 OL-14521-01 Appendix A Parts List Sorted by Carton Carton 41 of 44: Ta bletop Le g Base, 69-1620-xx, CTS3K-STRU CTURE Carton 41 of 44: Tabletop Leg Base, 69-1620-xx, CTS3K-STRU CTURE Carton 42 of 44: Accessory Cabinet, Left, 69-1838-xx, CTS3K-FUR- MAPLE Carton 43 of 44: Accessory Cabinet, Right, 69-1837-xx, CTS[...]

A-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Parts Li st Sorted by Carto n Carton 44 of 44 : Tabletops . Display Shel ves, and Speaker Boa rds, 69-16 38-xx, CTS3K- FUR-M APLE 69-1640 -xx 700-235 98-xx Displa y shelf sect ion, right 1 Chapter 3, 5 700-235 99-xx Disp lay shelf sect ion, cent er 1 Chapt er 3, 5 700-236 00-xx Displa y s[...]

B-1 Cisco T elePresen ce System 3000 OL-14521-01 APPENDIX B Cisco TelePresence System 3000 Pallet Dimensions and Description Revised: October 29, 2009, OL- 14521-01 The follo wing chapter prov ides you with the dimensions of t he pallets for the Cisco T el ePr esen ce System 3000. Ta b l e B-1 Pa llet Dimen sions and W eight Pallet Number Length (I[...]

B-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix B Cisco TelePresen ce System 3000 Palle t Dimensions and Desc ription The follo wing table provides you with the descr iption of the pallets for the Cisco T e le Pre sen ce System 3000. Ta b l e B-2 Pa llet Descr iption Pallet Number Descriptio n of Cont ents 1 Assem bly structure , display [...]

C-1 Cisco T elePresen ce System 3000 OL-14521-01 APPENDIX C Region- and Country -Specific Equipment Revised: December 8, 201 1, OL-14521-01 The fol lo wing countrie s and re gions ha ve equipment manufactu red to l ocal re gulations. Note Th ese photo s are provided a s a referen ce for the plug type . The power inser ts for the I/O mod ules may be[...]

C-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Argentina Argentina Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-AR 37-0841- 01 2 I/O module s: power/Ethernet CTS-LA PCONN-AR 74-4866- 01 6[...]

C-3 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Australia Australia Part Description Part Number Qty Photo T e lePresence Power Cord PWR-CORD10-A U 37-0 840-01 2 I/O m odules : po wer/Eth ern et CTS -LAPC ONN-A U 74-4 866-01 6[...]

C-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Cen tra l Eu ro pe Central Europe Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10- CE 37-0832-0 1 2 I/O modu les: po wer/Ethern et C TS-LAPCONN- CE 74-4865-0 1 6[...]

C-5 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment China China Par t Des cripti on Part N umber Qt y Pho to T e lePresence Power Cord PWR-CORD10- CN 37-0837- 01 2 I/O module s: power/Ethernet CTS-LAPC ONN-CN 74-4914- 01 6 Projector 74- 6687-01 Kit No. 69- 1990-01 1 Projector moun ting b racket 700-[...]

C-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment India, UAE, South Africa India, UAE, South Afri ca Part Description Part Number Qty Photo T e lePresence Power Cord PWR-CORD10-ID 37-0 838-01 2 I/O modul es: power/Ethernet C TS-LAPCON N-ID 74-4 864-01 6[...]

C-7 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Israel Israel Part Description Part Number Qty Photo T e lePresence Power Cord PWR-CORD10- ISR 37-0842- 01 2 I/O m odules : po wer/Eth ernet CTS- LAP CONN-ISR 74-4863- 01 6[...]

C-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Ital y Italy Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-IT A 37-0832-0 1 2 I/O modul es: power/Etherne t CTS-LAPCON N-IT A 74-4865-0 1 6[...]

C-9 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Japan Japan Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-JP 37-0847- 01 2 I/O modu les: po wer/Ethernet CTS-LAPCON N-JP 74-4951- 01 6[...]

C-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment North Ameri ca North America Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-N A 37-0847- 01 2 I/O module s: power/Ethernet CT S-LAPCONN- N A 74-4868- 01 6[...]

C-11 Cisco T elePresen ce System 3000 OL-14521-01 Append ix C Region- and Country -Specific Equ ipment Switzerland Switze rland Part Description Part Number Qty Photo T e lePresence Po wer Cord PWR-CORD10-SWI 37-0843- 01 2 I/O modu les: po wer/Ethernet CTS-LAPCON N-SWI 74-4862- 01 6[...]

C-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix C Reg ion- and Country-Specific Equipment Unit ed Kingdom United Ki ngdom Part Description Part Number Qty Ph oto T e lePresence Po wer Cord PWR-CORD10-UK 37-0831-0 1 2 I/O modu les: po wer/Ethern et C TS-LAPCONN- UK 74-4861-0 1 6[...]