Cisco Universal Broadband Router Cisco uBR10012 Bedienungsanleitung

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco uBR1 0 0 1 2 Univ er sal Br oadband Router Hardw are Installation Guide October 20 1 1 Text Part Number: OL -18259-09[...]

THE SPECIFICATION S AND INFORMATION REGARDING THE P RODUCTS IN TH IS MANUAL AR E SUBJECT TO CHAN GE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY [...]

i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 CONTENTS Preface i Document Revision History i Purpose ii Audience ii Document Organization ii Related Documentation iii Conventi ons iv Safety Information Referral Warning iv Terms and Acronyms v Obtaining Documentation and Submitting a Serv ice Request vi CHAPTER[...]

Contents ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 PRE2 Modules 1-20 PRE4 Modules 1-20 Redundant PRE Modules 1-21 PRE Module Description 1-21 Connector Ports 1-22 PC Media Card Slots 1-22 LCD Screens 1-22 PRE LED Indicators and Buttons 1-22 PRE Module Disposal 1-23 SIP and SPA Compatibility 1-24 Timing, C[...]

Contents iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Environmental Site Require ments 2-5 Temperature and Humidity Requirements 2-7 Power Guidelines 2-7 Power Connection Guidelines fo r DC-Powered Systems 2-8 Plant Wiring Guidelines 2-9 Interference Considerations 2-9 Cabling Guid elines 2-9 Ethernet and F[...]

Contents iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Connecting the Lineage Pow er Shelf to the UBR-PWR-DC= Module 3-25 Connecting the Lineage Pow er Shelf to the UBR-PWR-DC-PLUS= Module 3-27 Connecting the Alarm Monitor Cable 3-31 Prerequisites 3-31 Required Tools and Equipment 3-31 Steps 3-31 Disconnectin[...]

Contents v Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Formatting PC Media Cards 3-66 CHAPTER 4 Troubleshooting the Installation 4-1 Troubleshooting Methods 4-2 Before You Call for Technical Assistance 4-2 Problem Solving Using a Subsystems Approach 4-2 Troubleshooting Installation Problems 4-3 General Trouble[...]

Contents vi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Removing and Replacing a Network Lin e Card 5-21 Removing the Network Line Card 5-21 Installing the Network Line Card 5-25 Removing the Half-Height Gigabit Ethernet Line Card and the Slot Splitter 5-27 Removing a Half-Height Gig abit Ethernet Line Card 5-[...]

Contents vii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 NTSC (M) Cable Television Channel Freq uencies for Japan C-8 NTSC Cable Television Channel Frequencies for the Republic of Korea C-10 PAL/SECAM Cable Television Channels and Relative Frequencies C-14 PAL SECAM (D/K) Cable Television Channel Fre quencies [...]

Contents viii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09[...]

FI GU R E S i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure 1-1 Cisco uBR10012 Universal Broadband Router—Front Vie w with Front Cover 1-8 Figure 1-2 Cisco uBR10012 Router Chassis—Front View without the Front Cover 1-9 Figure 1-3 Cisco uBR10012 Router Chassis—Rear View 1-10 Figure 1-4 Cisco uBR10012[...]

Figure s ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure 3-11 Ferrite Beads on Ground Cable and Alarm Cable 3-18 Figure 3-12 Ferrite Beads Attached on DC-input Power Cables 3-19 Figure 3-13 Ferrite Beads on the Lineage Power Shelf 3-20 Figure 3-14 Attaching Grounding Wire to the Grounding Lug 3-21 Figure[...]

Figures iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure 5-5 Stripping Insulation 5-8 Figure 5-6 Alarm Terminal Block Connections 5-9 Figure 5-7 Loosenin g the Captive Scre ws 5-11 Figure 5-8 Opening the Ejector Levers 5-12 Figure 5-9 Removing the PRE Mod ule from the Chassis 5-13 Figure 5-10 Inserting t[...]

Figure s iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Figure B-1 RJ-45 Plug and Receptacle B-2 Figure B-2 Rollover Cable B-3 Figure B-3 RJ-45 Rollover Cab le Identification B-3 Figure B-4 Crossover Cable B-5 Figure B-5 RJ-45 Crossover Cable Identification B-6 Figure B-6 Straight-through Cable B-6 Figure B-7 [...]

TABLES i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 T able 1-1 DOCSIS and EuroDOCSIS 1.1 Upstr eam Data Rates 1-5 T able 1-2 DOCSIS and EuroDOCSIS 2.0 Upstr eam Data Rates 1-6 T able 1-3 DOCSIS and EuroDOCSIS Downstream Data Rates 1-6 T able 4 Specifications of the DC PEM module s 1-14 T able 1-5 Supported Ex[...]

Tables ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 T able B-2 Auxiliary Port Signaling B-4 T able B-3 10Base-T RJ-45 Connec tor Pinouts B-7 T able C-1 Analog Television System Ba seband Video Parameters C-2 T able C-2 Analog Television Chro minance Subcarrier Frequencie s C-2 T able C-3 Analog Television Sy[...]

i Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface This section describes the purpose, audience, organi zation, and con ventions used in this guide. This section also provides a re vision history and a list of related documents as well as instructions for obtaining technical assistance and addition al infor[...]

ii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface Purpose This installa tion guide explains the ini tial hardware inst allation and basic co nfiguration procedures fo r the Cisco uBR10012 un iv ersal broadband router . It contains procedures for installing the router hardware, creating a basic softw are c[...]

iii Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface Related Documentation The follo wing is a list of do cuments and URLs for the Cisco uBR1001 2 router: • Cisco uBR10012 Universal Br oadband Rout er Softwar e Conf igur ation Guide http://www .cisco.com/en/ US/docs/cable/cmt s/ub r10012/conf iguration/gu[...]

iv Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface – For information on IP , refer to the Network Pr otocols Configur ation Guid e, P art 1 and the Network Pr otocols Co mmand Reference, P art 1 publicat ions. Y ou can also refer to the Cisco IOS software releas e notes for the versio n of software you a[...]

v Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface Terms and Acronyms T o fully understand the co ntent of this guide, yo u should be familiar w ith the follo wing terms and acronyms: Note A complete list of terms and acron yms is av ailable in the Internetworking T erms and Acr onyms guide, av ailabl e on [...]

vi Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Preface • OIR—Online insertio n and remov al • PCI—Peripheral Comp onent Interconnect • PCMCIA—Personal Computer Memory Card International Associat ion • PPP—Point-to-Point Protocol • QoS—Quality of service • rcp—remote copy prot ocol • R[...]

CH A P T E R 1-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 1 Cisco uBR10012 Universal Broadband Router Overview The Cisco uBR10012 uni versal broadband router pro v ides a high-end, high-performance, high-capacity Cable Modem T ermination System (CMTS) solut ion. The Cisco uBR10012 router i s an aggre gation[...]

1-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router Features Cisco uBR10012 Router Features The Cisco uBR10012 router has the follo wing f eatures: • 19-inch rack mo unt, 22.75-inch de pth. See “Cisco uBR10012 Router” . • 31[...]

1-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Comparisons with Other Cisco CMTS Platforms • Fan module—F orced-air con vection cooling, see “Fan Assembly Module” . – V ariable speed le vels. The operati ng speed of the fan is determined b[...]

1-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router Functional Overview Upstream Data Path The follo wing e xample describes the upstream data path. 1. A request for service is generate d by a subscriber . The modem transmits the re[...]

1-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router and Cisco IOS Software a. Each ASIC decodes the head er to determine if th e pack et is destined for one of the do wnstream ports on that card. If so, the downstream header is remo[...]

1-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router and Cisco IOS Software T able 1 -2 DOCSIS and E uroDOCSIS 2.0 Upstr eam D ata Rates Upstream Channel Width Modulation Scheme, bit/symbol Baud Rate, symbol/sec Raw Bit Rate, Mb/sec [...]

1-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview NEBS Level 3 Compliance NEBS Level 3 Compliance The Cisco uBR10012 router is Netw ork Equipment Building S ystem (NEBS) Lev el 3 compliant. Thi s includes the following cate gories: • Filtration and f[...]

1-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Br oadband Rout er Hardware Figure 1-1 sho ws the front of th e Cisco uBR10012 router with the fro nt cov er installed. Figur e 1 -1 Cisco uBR1 0 0 12 Universal Br oadban d Rout[...]

1-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Hardware Figure 1-2 sho ws the front of a fully loaded chassis without the front cov er . Note Figure 1-2 is a sample repres entation of th e Ci sco uBR10012 ch[...]

1-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Br oadband Rout er Hardware Figure 1-3 sho ws the rear of a ful ly-loaded Cisco uBR10 012 router . Figur e 1 -3 Cisco uBR1 0 0 12 Rout er Chassis—Rear V iew Caution The handl[...]

1-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Hardware Cisco uBR10012 Router Slot Numbering Figure 1-4 sho ws the slot numberin g for the line cards a nd TCC+ cards in the rear of the chassis. The Cisco uB[...]

1-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Br oadband Rout er Hardware Figure 1-5 sho ws the slot numberin g for the F ast Ethernet interf ace on the acti ve PRE mo dule. Figur e 1 -5 Cisco uBR1 0 0 12 Chassi s Slot Num[...]

1-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Cisco uBR10012 Universal Broadband Router Modules The following section describes the modules u sed in the Cisco u BR10012 rout er . For a list of fiel[...]

1-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules DC Power Entry Modules The Cisco uBR10012 router is shipped w ith two DC po wer entry modules (DC PEMs) th at provide power to the system. One DC PEM [...]

1-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Supported External AC-Input Power Shelves If 100–120 V A C is the only a vailabl e power source at the faci lity , then use the external A C -input p[...]

1-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules way that the po wer connecti ons reside facing in side the rack when vie wed from the fro nt. This allo ws the DC output terminals of the e xternal A [...]

1-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Figure 1 -7 Rear View of the Lineag e AC-DC P ow er Shelf with Cables T o meet comp liance stan dards, use the DC po wer ca bles (3 m cable supplied al[...]

1-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules Figure 1 -8 LCD Module Disp lay P anel Note The LCD modu le functions de pend on the rele ase of the Cisco IO S software running on you r Cisco uBR100[...]

1-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules LCD Cable The LCD ribbon cable connects the LCD module to th e backplane. The folded end is connected to the LCD module. See Figure 1-9 . Figur e 1 -9 [...]

1-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules combination of a general purpose RISC pr oce ssor with adv anced programmable PXF netw ork processors provides the capacity to support th e aggregati [...]

1-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Redundant PRE Modules The PRE module support s redundant operat ion (two PRE mo dules in a Ci sco uBR10012 chassis). If the primary PRE fails, the seco[...]

1-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules Connector Ports The faceplate on the PRE contains th ree ports with RJ-45 connectors: • Console port—This asynchronou s EIA/TIA-232 serial port is[...]

1-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules on the (primary) PRE during an alarm condi tion shuts of f the external alarm, b ut does not deacti v ate the alarm LEDs on the PRE faceplate. Alarm LE[...]

1-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Ro uter Modules SIP and SPA Compatibility The Cisco uBR10012 router cu rrently supports the follo wing SIPs: • Cisco W ideband SIP for t he Cisco Wideband SP A • [...]

1-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Universal Broadband Router Modules Figur e 1 -13 TCC+ Card F aceplat e The faceplate on the TCC+ card has sev en LEDs labeled PO WER, ST A TUS, MAINT , PRESENT , and A CTIVE. Separate PR[...]

1-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview DOCSIS Timing, Communication, and Contr ol Card DOCSIS Timing, Communication, and Control Card On the Cisco uBR10012 uni v ersal broadband router , th e DTCC ca rd acts as a se condary processor that p[...]

1-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interfa ce Line Cards Cable Interface Line Cards The follo wing section describes the cable interface line cards used in the Cisco uBR10012 u niv ersal broadband router . • Cisco uBR-MC5X20S/U/[...]

1-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cable Interface Line Cards Cisco UBR-MC20X20V Cable Interface Card The Cisco UBR-MC20X20V cable interface line card is a 20 by 16 inch card designed speci fically for the Cisco uBR10012 uni v ersal bro[...]

1-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Cards Network Uplink Cards The follo wing sections describe the netw ork upli nk cards used in the Cisco uBR10012 uni versal broadband router: • Cisco Single Port Gi gabit Ethernet Lin[...]

1-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplin k Cards Figure 1-15 sho ws the faceplate for the Gigabit Ethernet line card. Figure 1 -15 Gigabit Ethernet Line Car d F aceplate Cisco Gigabit Ethernet Line Card LEDs Ta b l e 1 - 8 descr[...]

1-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Cards GBIC Specifications Ta b l e 1 - 9 lists the GE line card GBICs and their respecti ve cable ty pes and lengths. Cisco Half-Height Gigabit Ethernet Line Card The Cisco HHGE line car[...]

1-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplin k Cards War ni ng Because invisible radiation may be emitted from the apertu re of the port when no fiber cable is connected, avoid exposure to radiation and do not stare into open apertu[...]

1-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Network Uplink Cards Cisco uBR10-SRP-OC12SML DPT WAN Line Card The Cisco uBR10 Spatial Reuse Protocol ( SRP) OC 12 single-mode f iber , long-reach (SML) dynamic packet transpor t (DPT) W AN line card p[...]

1-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Optical Connec tors and Cables Optical Connectors and Cables For singl e-mode optical f iber connections, u se one duplex SC-typ e cable (see Figure 1-17 ), or two simplex SC-type cables (see Figure 1-[...]

1-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router FRU Resources PRE1 (spare) ESR-PRE1/R= PRE2 (primary and redundant ) ESR-PRE2/R PRE2 (spare) ESR-PRE2= PRE4 (primary and redundant) ESR-PRE4 PRE4 (spare) ESR-PRE4/R= PRE PC media [...]

1-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Rout er FRU Resources FRU Documentation Ta b l e 1 - 1 3 lists the Cisco f ield replaceable unit (FR U) do cumentation for the mod ules and interface lin e cards that are used in the Cis[...]

1-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Router FRU Resources Document title URL DC P ower Entry Module for the Cisco uBR10 012 Universal Br oadband Ro uter http://www .cisco.com/en/US/docs/cable/cmts/ubr 100 12/installation/f [...]

1-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 1 Cisco uBR10012 Universal Broadband Router Overview Cisco uBR10012 Rout er FRU Resources Document title URL Cisco Half-H eight Gigabit Ethernet Line Card http://www .cisco.com/en/US/docs /interfaces_mod ules/cable /line_card s/ubr_hh_ge/ quick/start /ub[...]

CH A P T E R 2-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 2 Preparing for Installation Before you install the Cisco uBR1001 2 uni versal broadband router , consider: • The power and cabling requirements that must be in place at your install ation sites • The equipment required to install the router • [...]

2-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Preventing El ectrostatic Disch arge Damage • Do not wear loose clothin g, jewel ry (including ring s and ch ains), or other items that could get caught in the chassis. • The Cisco uBR10012 router operates sa fely when it[...]

2-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Chassis-Liftin g Guid elines Chassis-Lifting Guidelines The Cisco uBR10012 chassis is not intended to be mo ved freq uently . When fully populated, the Cisco uBR10012 system weighs approximatel y 230 pounds. A depopulated ch [...]

2-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Electrical Safety Electrical Safety All system components are hot-swappable. They are designed to be removed and replaced while the system is operating wit hout presenting an electrical hazard or damage to the syst em. Follo [...]

2-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Environmental Site Requirements The en vironmental mo nitoring functional ity in the Cisco uBR10012 rout er protects the system and components from potenti al damage from e xcessi ve v o ltage and temperatur[...]

2-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements Figur e 2-1 Cooling Air P ath fo r the Cisco uBR1 0 0 12 56430 ALARM S C ISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R N E T L I N K A C T I V I T Y A U [...]

2-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Temperature and Humidity Requirements Ta b l e 2 - 1 lists the operating and nonoperating en vironmental site requirements. The ranges listed are those within which the Ci sco uBR10012 router conti nues to o[...]

2-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements Power Connection Guidelines for DC-Powered Systems The DC-input po wer supply allo ws the Cisco uBR10012 router to o perate on either –48 or –60 VDC systems. Both these po wer supplies can operate wi th [...]

2-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Plant Wiring Guidelines When planning the locat ion of the ne w system, consi d er the distance l imitations for signaling, EMI, and connector compatibility , as described in the follo wing sections. War ni [...]

2-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements • Distance limitations for each si gnal type • The specific cables you need to connect each interface • Any additio nal interface equipment you need, su ch as transceiv ers, hubs, switches, modems, ch[...]

2-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 2 Pre paring for Installation Site Requirements Rack-Mounting Considerations The Cisco uBR10012 router should b e rack-mounted for proper o peration and maintenance. The rack-mounting hardw are included with chassis i s suitable for st andard 19-inch equ[...]

2-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 2 Preparing for Installatio n Site Requirements • If you are also usin g the optional A C-inp ut pow er shelf, it should be installed immediately below the Cisco uBR10012 chassi s for po wer cabling con v enience. Ho we ver , install the A C-input po w[...]

CH A P T E R 3-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 3 Installing the Cisco uBR10012 Router This chapter describes the pr ocedures for installing the Cisco uBR10012 uni versal br oadband router in an equipment rack. It also describe s how to connect interface and power cables, the proper way to po wer [...]

3-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installation Methods Installation Methods For stab ility and ease of use, the Cisco uBR10012 router ch assis should be mounted in an equipment rack. The chassis can be mounted in a 19-inch (standard) equipment rack ([...]

3-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Preparing the Cisco uBR10012 Router for Rack-Mounting General Rack Installation Guidelines When planning you r rack installation, consider t he follo wing guidelines: • The Cisco uBR10012 router ch assis requires [...]

3-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Removing the Chassis Com ponents Before Installation Removing the Chassis Components Before Installation The Cisco uBR10012 router is shipped w ith all ordere d components already installed in the chassis. When fully[...]

3-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Removing the Chassis Co mponents Before Installation Figur e 3-1 Captive Scr ew Locations Step 3 Use a scre wdri v er to loosen the top and bottom capti v e scre ws until the y disenga ge and spring a way from the f[...]

3-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Removing the Chassis Com ponents Before Installation Figure 3-2 Opening the Ejector Levers Caution Do not operate the system unless a ll slots contain a line card or a blank faceplate. Always install a full-slot blan[...]

3-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Removing the Chassis Co mponents Before Installation Removing the Slot Splitter Use the follo wing procedure to remo ve a slot splitter from the chassis: Step 1 Attach an antistatic wrist strap to your wrist and to [...]

3-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Removing the Chassis Com ponents Before Installation Step 4 Slide the splitter ou t of the slot ( Figure 3-4 ). Step 5 If you are not installing a rep lacement splitter or a lin e card, install a full-slot blank face[...]

3-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching the Mounting Brackets Attaching the Mounting Brackets The Cisco uBR10012 router is shipped w ith four mounting brack ets that can be attached to ei ther the front or rear of the chassis, depending on your [...]

3-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Attaching the Mounting Brackets Figure 3-6 Brack et Location for Fl ush F ront-Mounting the Chassis 72311 ALARM S CISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R [...]

3-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching the Mounting Brackets Figur e 3-7 Brac k et Location for Flush Rear -Mounting th e Chassis 72312[...]

3-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Attaching the Mounting Brackets Figur e 3-8 Brac k et Location for Of fset F ront-Mounting the Chassis Note Y ou must use three scre ws to inst all each large bracket and two scre ws to install each small bracket. T[...]

3-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Cable Manag ement Brackets (Option al) Installing the Cable Manage ment Brackets (Optional) The Cisco uBR100 12 router is shipped w ith two cable- management brackets that are in stalled on the rear [...]

3-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Mounting the Chassis in the Rack Use the follo wing procedure to in stall the optional cable-management brackets on the rear of t he Cisco uBR10012 chassis: Step 1 Position the f irst mounting brack et immediately a[...]

3-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Mounting the Chassis in the Rack Ti p If you are installing the chassis in an equipment rack, it is helpful to hav e a third person a v ailable to maneuver the ch assis into position an d attach the brackets to the[...]

3-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Mounting the Chassis in the Rack War ni ng At least three people are required to mount the she lf in the equipment rack: two people are needed to hold the shelf in place while a third person tightens the mounting sc[...]

3-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching Ferrite Beads on the Cables Figur e 3-1 0 Installing the Chassis in a Ra c k using the Rear Mounting Brac k ets Attaching Ferrite Beads on the Cables Ferrite beads can be clamped on where the beads ar e a[...]

3-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Attaching Ferrite Beads on the Cables Figur e 3-1 1 Fer r it e Beads on Gr ound Cable and Alar m Cable Attaching Ferrite Beads on DC Power Cables For Class B emission compli ance requirements, two ferrite beads must[...]

3-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Attaching Ferrite Beads on the Cables Figur e 3-12 Fer r ite Beads Attac h ed on DC-input P ow er Cables Attaching Ferrite Beads on the Lineage Power Shelf An additional set of ferrite be ads are required if you ar[...]

3-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Ch assis to Ground Figure 3-13 F er r it e Beads on the Lineage P o we r Shelf Connecting the Chassis to Ground Connecting the Cisco uBR10012 rout er chassis to earth ground is required f or all DC po[...]

3-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the Chassis to Ground Attaching the Grounding Cable The follo wing procedure describes ho w to attach: • The grounding lug t o the grounding cable. • The grounding cable to the ch assis. • The grou[...]

3-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Ch assis to Ground Figur e 3-15 Location of th e Grou nd Lug Connect ors 103479 ALARM S CISCO 10000 FAIL PERFORMANCE ROUTING ENGINE C O N S O L E STA TUS ACO CRITICAL MINOR MAJOR E T H E R N E T L I N[...]

3-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Connecting the External AC-i nput Power Shelf to the Cisco uBR10012 Router The follo wing sections describe ho w to connect th e Lineage A[...]

3-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Step 1 Open the safety cov er from abov e the DC terminal blocks b y rotating the safety cov er up and of f of the DC terminal bl ocks of t[...]

3-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Connecting the Lineage Power Shel f to the UBR-PWR-DC= Module Prerequisites • Connect the DC power cables, alarm cables, and the A C-in [...]

3-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figur e 3-16 Lineage AC-DC P o w er Shelf Conn ected t o UBR-PWR-DC= PEM Modul e Step 5 Connect the A C po wer cables to a standard wall so[...]

3-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Connecting the Lineage Power Shelf to the UBR-PWR-DC-PLUS= Module Prerequisites • T wo Lineage A C-DC po wer shelves are required to sup[...]

3-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figur e 3-1 7 DC Y P o wer Ca ble with Lugged Ends Caution Only the left DC po wer terminals of the tw o Li neage shelves are used with UBR[...]

3-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Figure 3-1 8 Cabling T wo Lineag e P ow er Shelves wi th DC Y P ower Cables and Al ar m Cables Step 2 Connect the DC “Y” power cables [...]

3-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figur e 3-19 DC Y P o wer Cables and Alar m Cables Connect ed fr om Lineage P ow er Shelves t o UBR-PWR-DC-PLUS= Modules 1 Alarm monitor ca[...]

3-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Note Ensure that you lift the handles and route the cabl es underneath th e handles and through t he po wer cord clips of the PEM modules [...]

3-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the External AC -input Power Shelf to the Cisco uB R10012 Router Figure 3-21 Alar m M onitor Cable with PIN and RJ-45 connectors 2. Connect the two RJ-45 connector ends of the alar m monitor cable into th[...]

3-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the External AC-input Pow e r Shelf to the Cisco uBR10012 Router Figur e 3-22 Alar m Monitor Cabl e Connected Fr om the Line age A C-DC Po w er Shelf to UBR-PWR-DC= Module 276473 CISCO 10000 PERFORMANCE [...]

3-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting DC Power to the Cisco uBR10012 Router Disconnecting Cables from the Li neage AC-DC Power Shelf and the Cisco uBR10012 Router T o disconnect cables from the Lineage AC -DC power shel f and the Cisco uBR100[...]

3-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting DC Power to the Cisco uBR10012 Router War ni ng Care must be given to conne cting units to the supply circuit so th at wiring is not overloaded. Statement 51 War ni ng This product requires short-circuit[...]

3-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Alarm Ind icators Connecting the Cisco uBR10012 Chassis to a DC Power Source The DC po wer sources can be present at the site, or the y can be provided b y an external A C-input po wer shelf. If you are u[...]

3-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Alarm Indicators Connecting the Alarm Indicators Use the fol lowin g procedure to connect an al arm indicator t o the chassi s: Step 1 Obtain suf ficient wire for the desi red connections. Y ou will need[...]

3-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Alarm Ind icators Figur e 3-24 Alar m T er min al Bloc k Connections Step 6 Go to the next section, Connecting the Console Port an d Auxiliary Port , page 3-50 , to continue the installati on. 103482 A L [...]

3-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Module s Installing the Modules T o install t he modules in the Cisco uBR10012 router : Step 1 Remov e the front co ver b y pulling the co ve r tow ards you and carefully set it aside. • Fan assemb[...]

3-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Modules Also, do not attempt to remo ve the Ci sco MC28C card or the Cisco MC16x card from their carriers (adapter cards) while the they are installed in th e chassis. See the “Removing and Replacin[...]

3-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Module s Figure 3-25 Inser ting the Ca ble Int erf ace Line Card 72325 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1 4 U S 1 5 U S 1 6 U S 1 7 U S [...]

3-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Figur e 3-26 Closing the Ejector Lev ers Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card This section descri bes how [...]

3-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Caution Y ou must use slot 3 or slot 4 when installing the slot splitter and HHGE line card i n the Cisco uBR10012 router , using sl ot 1 or s[...]

3-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Figure 3-27 HHGE Line Card Locations 135149 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 U S 1[...]

3-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Figur e 3-28 Inserting the Slot Split t er 135151 U S 0 U S 1 U S 2 U S 3 U S 4 U S 5 U S 6 U S 7 U S 8 U S 9 U S 1 0 U S 1 1 U S 1 2 U S 1 3 [...]

3-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Figur e 3-29 Captive Scr ew Locations War ni ng Blank faceplates and c over panels serve three important functions: they preve nt exposure to[...]

3-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Installing the Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to install a HHGE line card into an installed slot splitter[...]

3-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Installing the Slot Splitte r and Half-Height Giga bit Ethernet Line Card Step 4 Be sure the ejectors are in the open position (as sho wn) and continue to push t he line card into the splitter until you can feel it [...]

3-49 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Installing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Figur e 3-32 Captive Scr ew Locations Step 7 Secure the line card in the slot sp litter by tighteni ng the top and bottom capti v e screw s ( [...]

3-50 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Console Port and Auxiliary Port Connecting the Console Port and Auxiliary Port The PRE module on the Cisco uBR10012 router has tw o asynchronous serial (E IA/TIA-232) RJ-45 ports that provide connecti[...]

3-51 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting the Console Port and Auxiliary Po rt Connecting to the Console Port The console port provides local administrati ve access to the router and its comma nd-line interface (CLI). Note Each PRE module must h[...]

3-52 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting the Console Port and Auxiliary Port • 9600 baud • 8 data bits • No parity generat ion or checking • 1 stop bit • No flo w control Step 6 If also connecting a modem to the auxiliary po rt, go to [...]

3-53 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Netw ork Management Cable s Step 5 Make sure that t he modem and auxiliary port on the router are conf igured fo r the same transmission speed (38.4 Kbps and 56 Kbps are typical). Configur e the modem fo[...]

3-54 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Network Man agement Cables Step 1 Connect one end of the Ethernet cable to the RJ-4 5 port on the primary PRE, labeled Ethe rnet (see Figure 3-36 ). Step 2 Run the other end of the Ethernet cable through [...]

3-55 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Netw ork Management Cable s • The same rule applies to pins 2 through 8 on each connector . The color of the wire at tached to a pin on one connector shou ld matc h the color of the wire attached to th[...]

3-56 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Cable Interf ace Line Cards an d Network Uplink Cards Connecting Cable Interface Line Cards and Network Uplink Cards Because there are very specific requirements for cablin g the d if ferent line c ards a[...]

3-57 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Cable Inte rface Line Cards and Network Uplink Cards Note If you hav e completed all cable connections, go to the “Replacing the Front Co ver” section on page 3-60 to continue the installation. If yo[...]

3-58 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Connecting Cable Interf ace Line Cards an d Network Uplink Cards Caution Make sure your fiber optic connecto rs are clean and debris free. Refer to Inspection and Cleaning Pr ocedur es for F iber-Optic Connections a[...]

3-59 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Connecting Cable Inte rface Line Cards and Network Uplink Cards Figure 3-40 Gigabit Ethernet Cable Management Step 6 If you ha ve compl eted all cable connections, go to the ne xt section, “Replacing the Front Co[...]

3-60 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Replacing the Fro nt Cover Replacing the Front Cover Use the following procedure to repl ace the front co ver on the chassis: Step 1 Slide the cov er onto the four corner po sts of the ch assis and then pu sh down s[...]

3-61 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Powering On the Syste m Powering On the System After all of the interfaces and other cables are connec ted, perform a visual check of all connections and then check that: • The ejector lev ers on each line ca rd [...]

3-62 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Configuring the Cisco uBR10012 Router at Startup 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 10012 Software (UBR10K-P6-M), Released Version 12.2(1) Cop[...]

3-63 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Configuring the Cisco uBR10012 Rou ter at Startup Ti p If you hav e exper ience using Cisco routers, consider conf iguring t he router by using the p rocedure described in th e “Basic Conf iguration in Global Con[...]

3-64 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Configuring the Cisco uBR10012 Router at Startup Setting Up the Interface After you respond to the SNMP questions, the setup script lists the i nterfaces. The follo wing table lists typical interf aces found on a Ci[...]

3-65 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco u BR10012 Router Configuring the Cisco uBR10012 Rou ter at Startup ! interface FastEthernet0/0/0 no shutdown media-type 100BaseX half-duplex ip address 172.27.48.209 255.255.0.0 ! end Step 7 Exit the setup script with out savin g, [...]

3-66 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 3 Installing the Cisco uBR10012 Router Formatti ng PC Media Cards Formatting PC Media Cards The PC media card that shipped with your PRE co ntains the def ault Cisco IOS image for boo ting your router . This section explains ho w to format a PC media car[...]

CH A P T E R 4-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 4 Troubleshooting the Installation This chapter pro vides basic troubleshooting inf ormation to solve the most common installation problems with the Cisco uBR10012 uni v ersal broadband rout er . Y our Cisco uBR10012 router went through extensi v e t[...]

4-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting Methods Troubleshooting Methods This section descri bes the troubleshooting meth ods used in this chap ter and describes ho w Cisco uBR10012 routers are di vided i nto subsys tems for more ef f icient pr[...]

4-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting Installation Proble ms Troubleshooting Installation Problems This section contains general tr oubleshooting informatio n to help you solv e any problems y ou might encounter during the installation o f t[...]

4-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting Ether net Connections Troubleshooting Ethernet Connections If an Ethernet conn ection to your Cisco uBR10012 router fails to work properly , and the corresponding LNK (Link) LED is not illumi nated, chec[...]

4-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting th e Console Port Serial Connection – Be sure that the cable is not connected to an uplink port. • If the LNK LED is i lluminated (green ), but the Ethe rnet port does not seem to be working properly[...]

4-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Identifying Startup Problems • Check the LEDs on the PRE to make sure th at it is powered up properl y . • If the cable, connections, po wer , an d terminal sett ings all check ou t and you still cannot connect to t[...]

4-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem 5. The initial system banner displays o n the console screen. If it is not displayed, see the “Connecti ng Network Management Cables” section on page 3-53 to verify that the ter m[...]

4-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem c. V erify if the UBR10-PWR-A C-PLUS= A C PEM show en vir onment command output displays a DC PEM module instead of A C PEM. Router# show environment Temperature information: Temperat[...]

4-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem Step 3 V erify if the UBR10-PWR-A C-PLUS= A C PEM is po wered on, and the V1 PO WER and V2 PO WER LEDs are illuminated (unless the y may not be w orking, as abov e). The A C po wer en[...]

4-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem c. The F A UL T LED should illuminate (yello w). If this LED is not illuminat ed, there could be a possibility th at the LED is not working, th erefore the LED cannot indicate a v al[...]

4-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem 3.3v Normal 3.29v Fan: OK Power Entry Module 0 type AC status: OK // AC PEM is displayed // Power Entry Module 1 type DC status: OK T ry one of the follo wing: • Upgrade to a suppo[...]

4-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem Troubleshooting the 2400 W AC-Input Power Shelf Check the follo wing to isolat e a problem to the A C -input po wer shelf. Step 1 Check to see which ve rsion of the PEM you ha ve in [...]

4-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Processor Subsystem Step 3 Check to see if the F A UL T LED is illuminated (yello w), if it is then: – Check that the ex ternal A C po wer source is supplying consistent A C v oltage at the proper[...]

4-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Cooling Subsystem Step 3 V erify the Status LEDs o n the TCC+ card. a. Is the ST A TUS LED on the primary TCC+ on (solid green) in dicating that it is the primary card ? b. Is the ST A TUS LED on th[...]

4-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the Lin e Cards 00:00:19:%ENVM-2-ENVCRIT:chassis outlet 1 measured at 30C/86F 00:00:19:%ENVM-2-ENVCRIT:chassis outlet 2 measured at 30C/86F Although an o ver -temperature conditio n is unlikely at initi[...]

4-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the HHGE Installation b. If a port has been enabled b ut it s corresponding en abled LED is still off, reseat the line card in its slot (you do not ha ve to turn of f the sy stem powe r when removing or[...]

4-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 4 Troubl eshooting the Installation Troubleshooting the HHGE Insta llation The yello w F AIL LED blinks 1. The SFP GBIC has been rejected because: – An internal fault is detected. – Not a Gigabit Ethernet S FP . – Not a Cisco SFP . – T wo SFPs wi[...]

4-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 4 Troubleshoo ting the Installation Troubleshooting the HHGE Installation[...]

CH A P T E R 5-1 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 5 Maintaining the Cisco uBR10012 Router The Cisco uBR10012 uni versal broadb and router is conf igured t o your order and ready for inst allation when it arri ves. After you instal l the system, you may ha ve to perform specif ic maintenance procedur[...]

5-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Shutting Down the System Caution Cisco recommends that you create a duplicate PC media card that cont ains the curren t boot softw are image and th e current softw are conf iguration. Y ou can use the backup card to[...]

5-3 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the Front Cover Removing the Front Cover Use the follo wing procedure to rem o ve the front co ver from the chassis. Step 1 Remov e the co ver b y lifting it up sli ghtly and then pulli ng it[...]

5-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Air Filter Step 1 Slide the cov er onto the four corner po sts of the ch assis and then pu sh down so that the posts are seated in th e g ro oves ab ove t he cove r h ol es (s ee Figure 5-2 ). Figur e [...]

5-5 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing th e Air Filter Note The product order number for a r eplacement air f ilter is UBR10-F AN-FIL TER=. Use the following procedure to replace the air f ilter: Step 1 Remov e the front co ver (see “Remo vi[...]

5-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the Fan Assembly Module Figur e 5-4 Air Filter Inser ted int o the Fr ont Cov er Step 5 Replace the front cover (see “Replacing the Front Cov er” ). Removing and Replacing the Fan Assembly[...]

5-7 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing DC Power Entry M odules If the failure LEDs—SINGLE F AN F AILURE and MUL TIPLE F AN F AILURE—are illuminated, remov e and reinsert the f an assembly module. If t he failure LEDs are stil[...]

5-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Connecting Alarm Ind icators If you did not conn ect the alarm indicators when yo u originally inst alled the Cisco uBR10012 chassis, use the follo wing procedure to connect an alarm in dicator to the system. Fo r s[...]

5-9 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing AC PEM Modules Figur e 5-6 Alar m T er min al Block Connections Removing and Replacing AC PEM Modules The Cisco uBR10012 router ships with two A C po wer entry modu les (PEMs). In this redund[...]

5-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the PRE Module Note Y ou do not need to shut do wn the Cisco uBR10012 router to replace a red undant A C PEM. If you are replacing both A C PEMs, you can repl ace one, bring it online, and th[...]

5-11 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-7 Loosening the Captive Scr ews Step 6 Simultaneously pi v ot both eject or lev ers aw ay from each other to diseng age the PRE module from t he backplane (see Figur[...]

5-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the PRE Module Figure 5-8 Opening the Ejector Levers Step 7 Slide the PRE module o ut of the slot and pl ace it on an antistatic surface, or in an antistatic bag (see Figure 5-9 ). ALARM S CI[...]

5-13 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figure 5-9 Removing the PRE Modu le from the Chassis Step 8 If you are install ing a ne w or replacement PRE module, proceed t o the next step. Oth erwise, install a bl an k c[...]

5-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing the PRE Module Replacing the PRE Module When replacing a PRE1 module with a PRE2 module, you must also install EMI gaskets and RF absorber material, for more information, go to the fol lowing[...]

5-15 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing the PRE Module Figur e 5-1 1 Closing the Ejector Levers Step 5 When fully inserted, the PRE module c ycles through its p ower -on self-t est. The F AIL LED stays on briefly (about 5 to 6 se [...]

5-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Insta lling a PC Media Card Removing and Installing a PC Media Card Use the follo wing procedure to rem o ve and install a PC media card. Note The Cisco uBR10012 router uses PC media cards that are a m[...]

5-17 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing a nd Installing a PC Me dia Card Figur e 5-13 Removing the PC Media Card Step 3 Insert the ne w PC media card in to on e of the card slots on the PRE (see Figure 5-1 4 ). Figure 5-14 Inserting the PC Medi[...]

5-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Timing, Communicatio n, and Control Plus Card Removing and Replacing a Timing, Communication, and Control Plus Card Use the follo wing procedure to install a ne w T iming, Communicat ion, a[...]

5-19 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing a Timing, Co mmunication, and Control Plus Card Figur e 5-16 Removing the TCC+ car d Step 7 If you are install ing a replacement card, proceed to the ne xt step. Otherwise, install a bl ank [...]

5-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Timing, Communicatio n, and Control Plus Card Figure 5-1 7 Inserting the TCC+ Card Step 10 Secure the line card in the chassis by tighte ning the top and bottom capti v e scre ws (see Figur[...]

5-21 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Removing and Replacing a Network Line Card Use the follo wing procedure to in stall a ne w network li ne card, or to remov e or replace an e xisting network line card in[...]

5-22 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Network Line Card Figur e 5-18 Loosening the Captiv e Scr ews Step 3 If installing a ne w lin e card in a blank slot, remo ve the blank slo t cov er and discard. Othe rwise, disconnect th e[...]

5-23 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Figure 5-1 9 Opening the Ejector Levers Step 6 Slide the card out of the slot and place it on an an tistatic surf ace, or in an antistatic b ag (see Figure 5-20 ). 10349[...]

5-24 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Network Line Card Figure 5-20 Removing the Networ k Line Card Step 7 If you are installing a ne w or replacement card, proceed to the next step. Otherw ise, install a blank co ver ov er the[...]

5-25 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacin g a Network Line Card Installing the Network Line Card Note For proper cooling and airflo w , a blank card cover must alw ays be installed in a blank line card slot. The product order number [...]

5-26 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Network Line Card Step 3 Simultaneously pi v ot both eject or lev ers to ward each ot her (until the y are parallel to the f aceplate) to firmly seat the card in the backplane (see Figure 5[...]

5-27 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethern et Line Card and the Slot Splitter Step 5 When fully inserted, the ca rd cycles through its p ower -on self-test. The F ail LED stays on briefly (about 5 to 6 seconds) and [...]

5-28 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing the Half-Height Gigabit Ethe rnet Line Card an d the Slot Splitter Figur e 5-23 Captive Scr ew Locations Step 3 Loosen the top and bottom capti ve scre ws until they disengage and spring a w ay from the fa[...]

5-29 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethern et Line Card and the Slot Splitter Figure 5-24 Op ening the Ejector Levers Caution Do not operate the system unless a ll slots contain a line card or a blank faceplate. Alw[...]

5-30 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing the Half-Height Gigabit Ethe rnet Line Card an d the Slot Splitter Removing the Slot Splitter Use the follo wing procedure to remo ve a slot splitter from the chassis: Step 1 Attach an antistatic wrist str[...]

5-31 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing the Half-Height Gigab it Ethern et Line Card and the Slot Splitter Step 4 Slide the splitter ou t of the slot ( Figure 5-26 ). Step 5 If you are not installing a rep lacement splitter or a lin e card, ins[...]

5-32 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Replacing the Slot Splitter and Ha lf-Height Gigabit Ethernet Line Card This section descri bes how to install the line card in the Cisco uBR10[...]

5-33 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Figur e 5-27 Inserting the Slot Split t er Step 2 Grasp the front of the slot splitte r with one hand and place your other hand under the [...]

5-34 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Figur e 5-28 Captive Scr ew Locations Step 4 Secure the slot splitter to the chassis b y tightening the to p and bottom capti ve scre ws ( Figu[...]

5-35 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Installing the Half-Height Gigabit Ethernet Line Card Use the follo wing procedure to install a HHGE line card into an installed slot spli[...]

5-36 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card Step 4 Be sure the ejectors are in the open position (as sho wn) and continue to push t he line card into the splitter until you can feel it be[...]

5-37 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Replacing the Slot Splitter an d Half-Heigh t Gigabit Ethe rnet Line Car d Figur e 5-31 Captive Scr ew Locations Step 7 Secure the line card in the slot sp litter by tighteni ng the top and bottom capti v e screw [...]

5-38 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing an SFP Module Removing and Replacing an SFP Module Y our HHGE line card is shipped with an SFP module inst alled. Use the procedures in this section if you need to change the SFP module: • [...]

5-39 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Replacing an SFP M odule Figur e 5-33 Disconnecting the LC-type Fiber -Optic Cable Step 2 Disconnect the fiber -optic cabl e connector from the SFP module ( Figure 5-33 ). Note which cable connector p[...]

5-40 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing an SFP Module Step 3 Unlock and remov e the SFP module as follo ws: a. Mylar T ab SFP Modules—Gently , but f irmly pull the plastic tab to free the locking pin and remov e the SFP module ( [...]

5-41 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Upgrading to a Half-He ight Gigabit Ethernet Line Card Step 2 Gently insert the SFP module into th e line card port until the edge connector is fully seated in the connector . Y ou will hear a click as the triangu[...]

5-42 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card Ti p T o prev ent alarms from acti vati ng, you must administrat i v ely shut do wn a cable interf ace line card before hot-swapping it . Otherwise, inform the net[...]

5-43 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing a Cable Inte rface Line Card Figure 5-36 Captive Scr ews, Ejector Lev ers Step 5 Simultaneously pi vot both ejector lev ers aw ay from each other to disengage the cable interface line c ard[...]

5-44 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card Figure 5-37 Removing the Ca ble Interf ace Line Car d Step 7 If you are installing a ne w or replacement cable interface line card, proceed to the next step. Other[...]

5-45 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing a Cable Inte rface Line Card Installing a Cable Interface Line Card Step 1 Grasp the faceplate of the new cable interf ace line card with one hand and place your other hand under the card c[...]

5-46 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card Figur e 5-39 Closing the Ejector Lev ers Step 4 Secure the cable interface line card in the chassis by tightening t he top and bottom capti ve screw s (see Figure [...]

5-47 Cisco uBR10012 Universal Broadband Ro uter Hardware Installation Guide OL-18259-09 Chapter 5 Maintain ing the Cisco uBR10012 Router Removing and Rep lacing a Cable Inte rface Line Card Step 6 Connect all downstream and upstream coaxial cable s to the cable interface line card as necessary . Step 7 Configure the cable interface line card if nec[...]

5-48 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Chapter 5 Maintaining the Cisco uBR10012 Router Removing and Replacing a Cable Interface Line Card[...]

A-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX A Technical Specifications This appendix pro vides speci fications i nformation about the Ci sco uBR10012 router , rou ter components, and cards used in the router . • Cisco uBR10012 Chassis and Chassis Components, page A-1 • Network Upl ink Cards and[...]

A-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Cisco uBR10012 Chassis and Chassis Components DC Power en try modules (PEM)— 34-1651-04, 34-1651-05 Pow er supply monitoring cable Supports two separate input feeds (–48 to –60VDC) by means of b uilt-in two -position ter[...]

A-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Cisco uBR10012 Chassis and Chassis Components A C Po wer entry modules (PEM) 34-1966-02 100—120 V A C operation is not supported Part Number: UBR10- PWR-A C (Primary) Part Number: UBR10- PWR-A C= (Spare) • Dimensions : Hei[...]

A-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Cisco uBR10012 Chassis and Chassis Components A C Po wer entry modules (PEM) 341-0387-01 100—120 V A C operation is not supported Part Number: UBR10- PWR-A C-PLUS (Primary) Part Number: UBR10- PWR-A C-PLUS= (Spare) • Dimen[...]

A-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Cisco uBR10012 Chassis and Chassis Components A C po wer shelf 2400W A C-input power shelf and DC PEM bund le UBR10-PWR-A C-EXT= • Chassis dimensions Height: 3.46 in. (87.9 cm) W idth: 19 in. (4 82.26 cm) Depth: 12.00 in. (3[...]

A-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Cisco uBR10012 Chassis and Chassis Components Fan assembly mod ule Part Number: UBR10-F AN-ASSY (Primary) Part Number: UBR10-F AN-ASSY= (Spare) • Product number (cable): UBR10-F AN-CAB= • Pow er consumption: 250 W 2 —4 a[...]

A-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Cisco uBR10012 Chassis and Chassis Components LCD module Part numb er: module–UBR10-D SPL= Part number: cable–UBR10-DSPL-CAB= • Pow er consumption: 2W 2 (6.824 BTU 3 ) per hour • W eight: 0.4 lb (0.1814 kg) • Height:[...]

A-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Network Uplink Cards and Cable Interface Line Cards Network Uplink Cards and Ca ble Interface Line Cards Ta b l e A - 2 li sts the physica l specifications for th e cards used with the Cisco uBR10012 router . PRE PC media card[...]

A-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Network Uplink Cards and Cab le Interface Line Cards Cisco Half-Height Giga bit Ethernet line card • ESR-HH-1G E and ESR-HH-1GE= • Pow er consumption:15.98 W (54 .53 BTU 2 ) • W eight: 2 lb (0.9 kg) • Height: 7.8 in. ([...]

A-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations Network Uplink Cards and Cable Interface Line Cards Cisco OC12SML-DPT W AN line card • USB-SRP-OC12SML, USB-SRP-OC12SML= • Pow er consumption: 110 W 1 (375.3 BTU 2 ) • W eight: 6 lb (2.72 kg) • Height: 16 in. (40.64 c[...]

A-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications Network Uplink Cards and Cab le Interface Line Cards Cisco uBR-MC3GX60V ca ble interface line card • UBR-MC3GX60V= • Pow er consumption: 246 W (839 BTU/hr) • W eight:11.6 l b (5.26 kg) • W idth: 1.38 in (3.50 cm) Heig[...]

A-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations SIP and SPA SIP and SPA Ta b l e A - 3 lists the SP As used with the Cisco uBR1001 2 router . T able A-3 SP A used with the Cisco uBR1 00 12 r outer Description Specifications Cisco Wideband SP A • Part Number: SP A-24XDS-S[...]

A-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A T echnical Specifications SIP and SPA 1-Port 10-Gigabit Ethernet SP A • Part Nu mber: SP A-1X10GE-L-V2 • Per port Bandwidth: 10 Gbp s • Number of ports: 1 • T otal Bandwidth: 10 Gbps • Po wer consumption: 25 • MTBF: 411, 892 hours SFP Modu[...]

A-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix A Technical Specific ations SIP and SPA Ta b l e A - 4 lists the SIPs used with the Cisco uBR10012 router T able A -4 SIP used with the Cisco uBR1 00 12 r out er Description Specification Cisco W ideband SIP • Part Number : UBR10-2XDS-SIP • Pow er c[...]

B-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX B Cable Specifications This appendix pro vides the follo wi ng cabling and pinout i nformation for the Cisco uBR10012 rou ters. • Coaxial Ca bles, page B-1 • Console and Auxiliary Port Cables and Pinouts, page B- 2 • Fast Ethern et Port Cables and P[...]

B-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Console and Auxiliary Po rt Cables and Pinouts Note Any of the three of the coaxial cables listed can be used to connect a Cisco cable interface card to the HFC network ; howe v er , the consi stent use of 59-ser ies cable is pref[...]

B-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Console and Auxiliary Port Cables a nd Pinouts How to Identify an RJ-45 Rollover Cable Y ou can identify a rollov er cable by hol ding the two ends of t he cable next to each other , with the tab at the back. The wire connected t o[...]

B-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Console and Auxiliary Po rt Cables and Pinouts Console Port Cables and Pinouts Use the RJ-45-to-RJ-45 rollo ver cable and RJ-45-to -DB-9 female DTE adapter (labeled TERMIN AL) to connect the console port to a PC r unning terminal [...]

B-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Fast Ethernet Port Cables and Pino uts Fast Ethernet Port Cables and Pinouts The 10Base-T/100Base-TX Fast Ethe rnet ports support IEEE 802.3 and IEEE 802.3u spec ifications for 10-Mbps and 100-Mbps transmission over un shielded twi[...]

B-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Fast Ethernet Port Cab les and Pinouts Figure B-5 RJ-45 Crossov er Cable Identification How to Identify an RJ-45 Straight-Through Cable Y ou can identify a Straight-t hrough cable by comparing the two modula r ends of the cable. H[...]

B-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Connecting a Cable to a n RJ-45 Connector Figur e B-7 RJ-45 Straight-Thr ough Cable Identification Note If your cable was p urchased from Cisco Systems, pin 1 is white. Ta b l e B - 3 lists the pinouts for the tw o Fast Ethernet po[...]

B-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Fiber-Optic Cables a nd Connectors Step 3 After arranging the wires in the correct order , cut them back so there is about 1/2 inch a vailable to i nstall in the connector . Step 4 Push the cable into th e connecto r so that the j[...]

B-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Specifications Fiber-Optic Cables and Con nectors War ni ng Class 1 laser product Statement 1008 War ni ng Class 1 LED product Statement 1027 Use a single-mode or multimode f iber -optic interf ace cable to connect your Cisco uBR10012 router to a[...]

B-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix B Cable Sp ecifications Fiber-Optic Cables a nd Connectors Figure B-1 1 Attac hing Simplex or Duplex Fiber -Optic Cables 25168 SONET/SDH with simplex or duplex SC connectors To network Simplex RX TX Duplex[...]

C-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX C Frequency Allocation This appendix pro vides informati on on broad cast and cable television NTSC and P A L/SECAM standards and frequencies used around th e world. There are three standards for transmit ting video. They are defined b y the method of enc[...]

C-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation Standards Co mparisons Standards Comparisons The follo wing tables ( Ta b l e C - 1 , Ta b l e C - 2 , and Ta b l e C - 3 ) include data from Recommendation ITU-R BT .470.6, Con v entional T ele vision System s (1998) and pro vide[...]

C-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s NTSC Cable Television Channels and Relative Frequencies Ta b l e C - 4 provides information on the NTSC frequency map f or standard 6-MH z channels in North, Central, and Sou[...]

C-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annels and Relative Frequ encies 8 8 180.0-186.0 181.25 183.0 185.75 181.2625 185.7625 180.0090 184.5090 9 9 186.0-192.0 187.25 189.0 191.75 187.2625 191.7625 186.0093 190.5093 10 10 192.0-198.0 19 3.25 19[...]

C-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s PP 52 2 390.0-396.0 39 1.25 393.0 395.75 391.2625 395.7625 390.0195 394.5195 QQ 53 2 396.0-402.0 39 7.25 399.0 401.75 397.2625 401.7625 396.0198 400.5198 RR 54 402.0-408.0 40[...]

C-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annels and Relative Frequ encies 87 600.0-606.0 601.25 603.0 605.75 601.2625 605.7625 600.0300 604.5300 88 606.0-612.0 607.25 609.0 611.75 607.2625 611.7625 606.0303 610.5303 89 612.0-618.0 613.25 615.0 61[...]

C-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Channels and Relative Frequencie s 127 810.0-816.0 811.25 813.0 815.75 811.2625 815.7625 810.0405 814.5405 128 816.0-822.0 817.25 819.0 821.75 817.2625 821.7625 816.0408 820.5408 129 822.0-828.0 823.25 825.0 8[...]

C-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC (M) Cable Television Chan nel Frequencie s for Japan NTSC (M) Cable Television Channel Frequencies for Japan Japan uses NTSC (M) with different channel assignments. T able C-5 Japanese Channel Assignments Channel Number Bandw[...]

C-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC (M) Cable Television Channel Frequencie s for Japan C33 282.0-288.0 283.25 285.00 287.75 C34 288.0-294.0 289.25 291.00 293.75 C35 294.0-300.0 295.25 297.00 299.75 C36 300.0-306.0 301.25 303.00 305.75 C37 306.0-312.0 307.25 309[...]

C-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annel Frequencie s for the Republic of Kor ea NTSC Cable Television Channel Frequencies for the Republic of Korea K orea uses NT SC (VHF , UHF) with dif ferent channel assignments. T able C-6 Korean Chann[...]

C-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Chann el Frequ encies fo r the Republic of Korea 14 120.0-126.0 121.25 123.0 125.75 CA TV 15 126.0-132.0 127.25 129.0 131.75 16 132.0-138.0 133.25 135.0 137.75 17 138.0-144.0 139.25 141.0 143.75 18 144.0-150.[...]

C-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation NTSC Cable Television Ch annel Frequencie s for the Republic of Kor ea 32 1 270.0-276.0 271 .25 273.0 275.75 CA TV 33 1 276.0-282.0 277 .25 279.0 281.75 34 1 282.0-288.0 283 .25 285.0 287.75 35 1 288.0-294.0 289 .25 291.0 293.75 [...]

C-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation NTSC Cable Television Chann el Frequ encies fo r the Republic of Korea 67 480.0-486.0 481.25 483.0 485.75 CA TV 68 486.0-492.0 487.25 489.0 491.75 69 492.0-498.0 493.25 495.0 497.75 70 498.0-504.0 499.25 501.0 503.75 71 504.0-510.[...]

C-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL/SECAM Cable Television Chann els and Relative Frequencies PAL/SECAM Cable Television Channels and Relative Frequencies Ta b l e C - 7 provides information on t he Phase Alternating Line (P AL) a nd SEquential Couleur A vec Me[...]

C-15 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation PAL/SECAM Cable Television Chann els and Relative Frequencies S4 125.0-132.0 126.25 131.75 S5 132.0-139.0 133.25 138.75 S6 139.0-146.0 140.25 145.75 S7 146.0-153.0 147.25 152.75 S8 153.0-160.0 154.25 159.75 S9 160.0-167.0 161.25 1[...]

C-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL/SECAM Cable Television Chann els and Relative Frequencies S31 382.0-390.0 383.25 388.75 S32 390.0-398.0 391.25 396.75 S33 398.0-406.0 399.25 404.75 S34 406.0-414.0 407.25 412.75 S35 414.0-422.0 415.25 420.75 S36 422.0-430.0 4[...]

C-17 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation PAL/SECAM Cable Television Chann els and Relative Frequencies 45 662.0-670.0 663.25 668.75 46 670.0-678.0 671.25 676.75 47 678.0-686.0 679.25 684.75 48 686.0-694.0 687.25 692.75 49 694.0-702.0 695.25 700.75 50 702.0-710.0 703.25 7[...]

C-18 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL SECAM (D/K) Cable Television Channel Freq uencies for the People ’s Republic of China PAL SECAM (D/K) Cable Television Channel Frequencies for the People’s Republic of China Note The downstream frequency plan in cludes al[...]

C-19 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency Allocation PAL SECAM (D/K) Cable Television Channel Freq uencies for the People’s Republic of China Z22 336.0-343.0 336.25 342.75 Z23 344.0-351.0 344.25 350.75 Z24 352.0-359.0 352.25 358.75 Z25 362.0-367.0 362.25 366.75 Z26 368.0-375.0 368[...]

C-20 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix C Frequency A llocation PAL SECAM (D/K) Cable Television Channel Freq uencies for the People ’s Republic of China DS27 623.0-630 .0 623.25 629.725 DS28 631.0-638 .0 631.25 637.75 DS29 639.0-646 .0 639.25 645.75 DS30 647.0-654 .0 647.25 653.75 DS31 655[...]

D-1 Cisco uBR10012 Universal Broadband Router Hardware Installation Guide OL-18259-09 APPENDIX D Manufacturers for Hardware Components Ta b l e D - 1 and Ta b l e D - 2 provide contact informatio n for manufacturer s, web sites, and product of ferings required to prepar e and provisio n a Nort h American cable headend site for two- way data. Ta b l[...]

D-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Man ufacturers for Hardware Compon ents North American Ch annel Plans In addition, Cisco recommends the foll owing man ufacturers, web sites, and product of fering s for v arious measurement de vices you will need to prepare and pr ovision a North Amer[...]

D-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Manufacturers for Hardware Componen ts European Channel Plans European Channel Plans In addition, Cisco recommends the foll owing manufactur ers, w eb sites, and product of ferings for v arious measurement de vices you will need to prepare and pr ovisi[...]

D-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Man ufacturers for Hardware Compon ents Cable Kits and Tools Cable Kits and Tools T ab le D-4 Manu f actur ers for Eur ope an Headend Measurement Devices Manufacturer Web Site or Phone Number Products/Model Digital Signal Level Meters/QAM Analy sers Ac[...]

D-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Manufacturers for Hardware Componen ts External AC-Input Power Shelves External AC-Input Power Shelves T able D-6 AC-input P o we r Shelves M anuf actur es Manufacturer Web Site or Phone Number Products/Model Lineage 1 1. For ordering, visit www.arrow.[...]

D-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Appendix D Man ufacturers for Hardware Compon ents External AC-I nput Power Shelves[...]

GL-1 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 GLOSSARY S ymbols 1+1 APS See APS . 10Base-T 10 -Mbps baseband Ethernet specif ication using t wo pair s of twist ed-pair cabling (Cate gory 3, 4, or 5): one pair for transmitting data and the other for rece i ving data. 10Base-T , which is part of th e IEEE 802[...]

Glossary GL-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 A AAL A TM ada ptation layer . Service-depe ndent sublaye r of the data link layer . The AAL accepts data from dif ferent ap plications and present s it to the A TM layer in the form of 4 8-byte A TM payload segmen ts. AALs consist of tw o sublayers:the[...]

Glossar y GL-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 B Backplane The circuit board at the back of the chassis that all component s plug into. It provides the physical connection between an interface processor or line car d, and the data and po wer di stribut ion buses insi de a chassis. Bellcore Bell Com[...]

Glossary GL-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 CO Central off ice. The local telephone comp any of f ice to which all lo cal loops in a gi ve n area connect and in which circuit switchi ng of subscriber lines occurs. Command Line Interface See CLI . Console Data terminal equipment (DTE) through whic[...]

Glossar y GL-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 E E1 W ide-area digital transmissio n scheme used predominantl y in Europe that carries data at a rate of 2.048 Mbps. E1 lines can be leased for priv ate use from common carriers. Compare with T1; see also DS1. Edge Servic es Router See ESR . Electroma[...]

Glossary GL-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Frame Relay Industry-stan dard, switched data li nk layer protocol t hat handles multiple virtual circuits usi ng HDLC encapsulation between connected de vices. Frame Rela y is more ef fici ent than X.25, the protocol for which it is g enerally cons ide[...]

Glossar y GL-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 IOS Internet Operating System. See Cisco IOS . IP Internet Protoc ol. Network layer protoco l in the TC P/IP s tack offering a co nnectionless internetwork service. IP provides features for addressing, type-of-service sp ecificatio n, fragmentation and[...]

Glossary GL-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 M M13 Generic term for equipment that multiple xes DS1s into DS3s. Somet imes used to describe a specific DS3 multiplex format. Some standards use this term to describe a synch ronous multiple xing format also kno w as SYNTRAN. In many cases M13 does no[...]

Glossar y GL-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Multicast Single packets copied b y the netw ork and sent to a s pecific subset of network addre sses. These addresses are specified in the Destin atio n Address fi eld. Compare with Broadcast and Unicast . Multilink Point-to-Point See MLP . Multimode [...]

Glossary GL-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Optical carrier See OC . Optical fiber See Fiber-op tic cable . P Packet Logical grouping of information that incl udes a header containing contro l information and (usuall y) user data. Packets are most often used to refer to network layer units of da[...]

Glossar y GL-11 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 PRE Performance routing engi ne. The central routing unit for th e Cisco uBR10012 uni ve rsal broadband router . The PRE performs all La yer 2 and Layer 3 pack et manipu lation rel ated to routing and forwarding thro ugh the Cisco uBR10012 routers. Us[...]

Glossary GL-12 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 S SAR Segmentation an d reassembly . One of the two sublayers of the A AL common part con v er gence sublayer , responsible for dividing (at the source) and reassembling (at the destin ation) the protocol data units (PDUs) passed from the con ver gence[...]

Glossar y GL-13 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 T3 Digital W AN carrier facility . T3 transmits DS3-format ted data at 44.736 Mbps through th e telephone switching network. TAC A Cisco T echnical Assistance Cente r . There are four T A Cs worldwide. TACACS T erminal Access Controller Access Cont ro[...]

Glossary GL-14 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 U UBR See Univ ersal Br oadband Rou ter . Unchannelized DS3 See C lear channel DS3 . Unicast A message sent to a single network destinati on. Compare with Broadcast and Multicast . Universal Broadband Router A Cisco Cable Modem T ermination System (CMT[...]

Glossar y GL-15 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Wide-area network See WA N . WRED W eighted Random Early Detectio n. RED uses an algo rithm to random ly discar d packets.The result of the drop is that the source detects the d ropped traf f ic and slows its transmission. WRED combines the capabiliti[...]

Glossary GL-16 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09[...]

IN-1 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 INDEX Numerics 1000Base-LX/LH 1-31, A-8, A-9 1000BASE-SX A-9 1000Base-SX 1-31, A-8 1000Base-ZX 1-31, A-8, A-9 10BASE-T RJ-45 connector pinout s (table) B-7 A AC-input power shelf installati on 3-3 installing after installi ng the main chassis 3-15 AC PEM descrip[...]

Index IN-2 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 C cable length, factors determining 2-10 cable management brackets, installing 3-13 cables attaching optional cable man agement brackets 3-13 simplex or duplex fiber-opt ic cables (figure) B-10 auxiliary port B-4 Category 3 or 5 UT P RJ-45 B-5 console port[...]

Index IN-3 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Ethernet port on PRE mo dule 1-22 fan assembly module 1-34 features 1-7 front view with front cover(figure) 1-8 front view withou t front cover (figure) 1-9 functional overview 1-3 general rack-mounti ng guidelines 3-3 Gigabit Ethernet line card 1-29 groun[...]

Index IN-4 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 OC-12 POS 1-31 optical SC-type (simplex an d duplex) 1-34 RJ-45 3-64 console port, PRE1 module 3-61 cables B-4 configuring the attached terminal 3-51 DB-9 connecto r 3-51 pinouts B-4 problems 4-5 system banner display 4-7 troubleshooting 4-5 console port, [...]

Index IN-5 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 F faceplate Cisco OC-12 POS (figure) 1-32 Cisco TCC+ card (figure) 1-25 gigabit Ethe rnet (figure) 1-30 PRE1 module (figure) 1-21 PRE2 module (figure) 1-21 fan assembly module airflow 2-6 airflow cautions 3-3 description 1-34 multiple or single fan failure[...]

Index IN-6 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 requirements 2-7 specifications A-1 I inserting cable interface line card (figure) 3-41, 5-45 GBIC (figure) 3-57 network line card (fi gure) 5-25 PC media card (figure) 5-17 PRE module in the chassis (figure) 5-14 the TCC+ card (figure) 5-20 installing 5-1[...]

Index IN-7 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 captive screws on the PRE1 mod ule (figure) 5-11 ground lug connector s (figure) 3-22 M manufacturers European he adend provisio ning requirement s (table) D-3 North American head end provisioning requ irements (table) D-1 media cards formatting 3-66 memor[...]

Index IN-8 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 Performance Routing Engine, see PRE module physical description 1-7 pinouts auxiliary port B-4 console port B-4 Fast Ethernet port B-5 plant wiring guidelin es 2-9 ports Fast Ethernet port on active PRE 1-12 gigabit Ethernet GBIC 1-29 OC-12 POS SC connecto[...]

Index IN-9 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 S safety guidelines 2-1 electricity 2-4 lifting the chassis 2-3 preventing electrostatic d ischarge damage 2-2 translated warnings 1-iv SECAM frequency allocatio n C-14 standard, description C-1 setup command 3-65 setup facility 3-61 SFP module inserting 5[...]

Index IN-10 Cisco uBR10012 Universal Broadband Rout er Hardware Installation Guide OL-18259-09 terminal server connections 3-61 terms and acrony ms 1-v Timing, Communi cation, and Control Plu s card, see TCC+ card tools and suppli es connecting DC power 3-35, 3-36, 3-50 connecting groun d 3-20 for maintenance and replacin g modules 5-2 transmission[...]