Clover Electronics LCD22164 Bedienungsanleitung

1 INSTRUCTION MA NUAL 22” Wide LCD Screen All in One System Built-in 16Ch DVR MODEL: LCD22164, LCD22168, LCD221616 V e r . 020309, 041309 , 042909,102609 Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.[...]

2[...]

Conte nts 3 CONTENTS AB OU T TH IS MA NU A L .. .................. .................. ........ ...... .................. ............... .................. ...... ... ....... 9 1.U NP AC KIN G . .................. .................. ............... .............. .................. ............... ................ ........... ..... 11 1-1. 22” W [...]

Stand-a lone DVR Instructio n Manual 4 6-6. D ISPLA Y S CREEN ... ........................... ........................... ............................ ........................... . 37 6-6.1. FULL SCREEN....... ............ ..................... ..................... ................... ........... .................. .................. 37 6-6.2. SPL[...]

Conte nts 5 6-10.4. Cop ying the recorded data during repla ying ...... ..................... ..................... ..................... ........ .. 68 7.S ETU P ....... ............... .................. ................ ............. .................. ............... ................. .......... ........... 71 7-1. SETUP .................... ..[...]

Stand-a lone DVR Instructio n Manual 6 7-6.6. Recordi ng S peed................ ..................... ..................... ..................... ..................... ..... ............ ..... 100 7-6.7. Recordi ng Quality.......... ............ ..................... ..................... ................... ............ ........ ........ .........[...]

Conte nts 7 8-4.5. Replay ............... ............ ................... ............ ..................... .................. ............ ..... ......... ............ ... 143 8-4.6. COPY .............. ............ ..................... ................... ........... ..................... .................. .................... ... 145 8-4.7. [...]

Stand-a lone DVR Instructio n Manual 8[...]

9 About this manual This is the Instruction Manual for 22” Wide TFT -LCD monitor built-in 16Ch DVR system, Model LCD22164, LCD22168 and LCD221616. The last digit(s) of the model numbers (e.g.: 4, 8 and 16) represent the number o f cameras included in the system. This Manual describes how to install an d ope rate the 22” Wide TFT -LCD monitor bu[...]

Stand-a lone DVR Instructio n Manual 10[...]

11 1. Unpacking Care should be taken when unp acking to avoid damaging the system. Please check that the following items are in cluded: Note : Contact your dealer immediately if any components are missing. 1 22” LCD M onitor built-in 16 Ch DVR 2-Indoor came ra with C-mount lens 2-Outdoor camera w ith mounting bracke t 2-Mou nting bracket for in d[...]

Stand-a lone DVR Instructio n Manual 12 1-1. 22” Wide LCD Panel Built-in 16 Ch Digital Video Recorder LCD221 64 is the most reliable and functional embedded DVR system available today . The syst em disp lays 16 channe ls of liv e images in Real Time speed, compre sses data digitall y and records them to the Hard Disk Drive, which can be replayed [...]

13 2. Features ▶ 22” Wide Screen - High resolution TFT -LCD 1,680 x 1,050, Contrast ratio 1,000:1, Res ponse time 5 msec ▶ Multi Functional Record - Powerful, multiple Record Modes available: Manual (Continuous), Timer , and Motion Detection Recording. ▶ User frien dly GU I - A few simple b uttons for Easy control. ▶ Automatic System Reco[...]

Stand-a lone DVR Instructio n Manual 14[...]

15 3. What to do at the time of Installation The system should be inst alled in the following order; 1. Make sure all the required hardware is available. - 22” wide TFT -LCD monitor built-in 16 Ch DVR - Up to 16 cameras capacity (Refer to the retail box for the number of camera in cluded in the system ). - CCTV mon itor or TV set if ne cessary - [...]

Stand-a lone DVR Instructio n Manual 16[...]

17 4. Specifications I T E M DESCRIPTIONS T elevision System NTSC P AL Refresh Rate 60 fields/sec 50 fields/sec Video Resolution 720x480 720x576 Video Inputs 8- 6pin Din Cameras and 8- BNC Cameras Video Input Signal Composite 1.0 Vp-p 75 Ohms Video Output 1- Composite output VIDEO SIGNAL Video Output Signal Composite 1.0 Vp-p 75 Ohms Live 480 Frame[...]

Stand-a lone DVR Instructio n Manual 18 Display 22” TFT LCD ac tive matrix Pixel Pitch 0.282(H) x 0.282(V) mm Active Display Ar ea 473.76(H) x 296.1(V) mm Display Colors 16.7M (Hi-FRC) Display Mode Normally White Pixel A rrangement RGB vertical stri pe Luminance of White 300 cd/ ㎡ Contrast Ratio(Ce nter) 1000 : 1 Viewing Angle L/R/T/B 80 / 80 /[...]

19 5. Installation CONTENTS 5-1. CONTR OLS AND CONNECT ORS ........... ........................... ............................ ................... 20 5-2. NOTE FOR INST A LLA TION ................ ............................ ........................... ....................... . 23 5-3. SYSTEM CONNECTI ON ......................... ................[...]

Stand-a lone DVR Instructio n Manual 20 5-1. Controls and Co nnectors z Front - A [Fig. 5- 1 Front Vi ew] A 5 6 7 2 3 4 11 12 13 8 9 10 1[...]

5. Installation 21 1. Stand-by Power Mode Button - Turn the LCD Panel (Screen) On or Off - Even though the LCD Screen is turn ed off by pressing this button, the system w ill be cont inued t o work. 2. REC Key - Press this key to start to record. - In order to stop recording, click the REC button on the MENU Bar and the following message will b e a[...]

Stand-a lone DVR Instructio n Manual 22 CAMERA IN EAC H 12VD C . MA X 0.25A. 3W CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 SLAVE V / O A / O ETHERNET 12345678 G ALARM I N USB 1 USB 2 RS232 RS485 ALARM OUT GND TX RX - + GND N/O COM N/C CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 12. AL AR M L E D - The g reen LED will blink when an alarm is activate[...]

5. Installation 23 5-2. Note for Installation  Install the system according to the instructions described in this manual.  The 22” LCD monitor built-in 16Ch DVR and Indoor Cameras are designed for indoor use and should not be used outdoors.  Avoid any a rea wit h hig h humidi ty or dust which c an short en li feti me of t he syst em. [...]

Stand-a lone DVR Instructio n Manual 24 5-3. System Connection [Fig 5-3 System Connect i on][...]

5. Installation 25 5-4. Installation 5-4.1. Camera Connection ▫ Connection of 6pin MINI DIN Cameras Connect the supplied cameras to the Camera Input (6p i n mini DIN jack) on the back of the system as shown in [Fig. 5-2 Rear View]. ▫ Connection of BNC Cameras Conn ect th e BNC ca meras (no t incl uded) to the Ca mera I nput (B NC conn ector ) o[...]

Stand-a lone DVR Instructio n Manual 26 (screen) as s hown [Fi g.5-4 -2]. - Attach the mounting bracket to the desired location on the wa ll. Locate wall studs and s ecurely fix the mounting br acket w ith the supplied screws. 5-4.2.1. Connection of Composite M onitor If ne cess ary , connec t the compos ite Video Outp ut (yel low RCA ) and Audi o [...]

5. Installation 27 5-4.4. RS485 / RS232C Connection ▫ Connect the cable to the “RS485 / RS232C PORT” on the rear of the system. Specification of the RS232C connector is standard for “DSUB9” The Maximum Length of cabl e is 45 ft. When you w ant to use a longer distance, use a “RS232 to RS422” converter. 5-4.5 Connection to an Ethernet [...]

Stand-a lone DVR Instructio n Manual 28 5-4.6. POWER CABLE CONNECTION Connect the provided AC power cable to the monitor and a n AC outlet. AC inp ut voltage is AC 1 10V to 220V 50/60H z. It should not b e shared with other electrical equipment on the same line. Frequent power cuts can cause crucial failures, so if you have an unsta ble power sourc[...]

29 6. How to operate CONTENTS 6-1. GENERAL INFORMA TION ............. ....................... ........................... ............................ ..... 31 6-2. OPERA TING INTERF ACE ......... ............................ ...................... ............................ .......... 32 6-3. IR REMOTE CONTROLLER ........... ....................[...]

Stand-a lone DVR Instructio n Manual 30 CONTENTS 6-7. LIVE ........... ............................ ...................... ............................ ........................... ............... 39 6-7. 1. FULL SCREEN ....................... ........................... ............................ ........................... . 39 6-7. 2. SPLIT SCR[...]

6. How to Operate 31 6-1. General Information ▫ Y ou can operate all functions of the system by use of buttons located on the front p a nel, remote controller and a mouse. Additionally , you can remotely control this unit via RS422C or the Ethernet port located on the back of the unit. ▫ System status is indicated by either LED lights on the op[...]

Stand-a lone DVR Instructio n Manual 32 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the front panel or buttons on the remote controller and clicking th e mouse. A lot of users mostly prefer to use a mouse on these kinds of products such a s DVRs, computers and computer-a ided devices. Therefore we woul[...]

6. How to Operate 33 6-3. IR Remote Controller 1. PO WER / STANDBY 2. REC 3. STA TUS 4. ZOOM 5. FREEZE 6. No. 1~16 Cha nnel (Fu ll Screen) o r I R I D N u m b e r 7. Disp lay format (Split) 8. IR I D Set 9. MENU 10. E SC 11. UP 12. DOWN 13. L EFT 14. RI GHT 15. ENTER 16. SEARCH / PLAY 17. S TOP 18. FF, REW 19. Movement forward or backward by 1 Fiel[...]

Stand-a lone DVR Instructio n Manual 34 6-4. Power On/Off 6-4.1. POWER ON On the rear p anel: T urn on the POWE R switch on the rear p anel (See Fig.5-2 ). The LED on th e front panel is lit when the POWER sw itch is ON. By S t and-b y Power Mode Button Press this button on the front panel (See Fig.5-1 ) to turn ON the system when the POWER (MAIN) [...]

6. How to Operate 35 ▫ Press the ENTER button to tur n the power OFF . By clicking the mouse : ▫ Click the POWER OFF but ton on the MENU ba r (See Fig.6- 3 ) and then the message (See Fig.6-2 ) w ill be d isplayed on the scre en. ▫ Click the OK butto n to turn th e power OFF . 6-4.4 APPEARANCE OR DISAPPEARANCE OF POWER BUTTON The P ower O n/O[...]

Stand-a lone DVR Instructio n Manual 36 6-5. Menu Bar On/Off Right-click on the screen in the LIVE or the RECORD mode. The MENU bar will be appeared and then displayed for 15 seconds. Right-click again, then it will be disappeared. CLICK CLIC K [Fig.6-4 LIVE S creen][...]

6. How to Operate 37 6-6. Display Screen 6-6.1. FULL SCREEN [Fig.6-5 FULL screen] RECORD ICON CURRENT TIM E AUDIO COPY STATUS SE Q UENCE ICON CAMERA TITL E[...]

Stand-a lone DVR Instructio n Manual 38 6-6.2. SPLIT SCREENS FULL SCREEN QUAD SCREEN SEQUENCING SCREEN 16 SPLIT SCREEN 4page SEQUENCING SCREEN 2page SEQUENCING SCREEN 9 SPLIT SCREEN[...]

6. How to Operate 39 6-7. LIVE 6-7.1. FULL SCREEN ▫ A Full SCREEN is available in the LIVE mode or the RECORD mode. ▫ Click a certain camera’s sc reen in the LIVE mode or in the RECORD mode and then a FULL SCREEN will be displayed. ▫ Click t he FULL screen to return to the SPLIT SCREEN. 6-7.2. SPLIT SCREEN ▫ A SPLIT SCREEN is available in[...]

Stand-a lone DVR Instructio n Manual 40 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mod e. Each of the channels will be d i splayed in sequence and t he dwell time can be adjusted in the c amera set up menu (Refer to section 7-4.7). ▫ This ICON is displayed in the upper left hand co[...]

6. How to Operate 41 6-7.4. LIVE AUDIO ▫ The basic system (Model LCD22164) includes two indoor cameras built-in two way audio and two outdoor cameras built-in one way audio and IR LEDs (Infrared) to view objects in the darkness. Audio functions up to 8 cameras. ▫ Click the CHANNEL button you wish to listen on the MENU bar as shown below (See Fi[...]

Stand-a lone DVR Instructio n Manual 42 ▫ To listen only (one way Audio), select one out of indo o r/outdoor cameras by clicking the CHANNEL button on the MENU bar . Note : - It is impossible to communicate bet w een the system and the ca meras as long as the DVRMaster (GUI) is being exec uted, even though the Spe a ker and the Microphone are tur[...]

6. How to Operate 43 6-7.5. ZOOM The image on the scre en will be zoo m ed up to 2 tim es when the ZOOM button is clicked in the LIVE mode (This function is avai lable on the full screen mode only). ▫ Cl ick t he ZOOM but ton on t he ME NU bar in t he LIVE mode. ▫ Move the mouse on the ZOOMED screen, and then the 8-directional arrow marks will [...]

Stand-a lone DVR Instructio n Manual 44 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click the OSD button on the MENU b ar to turn the OSD (On Screen Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared. [Fig.6- 11 OSD ON SCRE EN] 2007/05/25 19:30: 41 CAM 01 CAM 02 [...]

6. How to Operate 45 6-7.7. PAN / TILT ▫ Click the PAN/TILT button on the MENU bar in the LIVE mode to access the PAN/TILT cameras. ▫ Click the (EXIT) button to return to th e LIVE mode. [Fig.6-13 PAN/TILT butto n] [Fig.6-14 PAN/TILT window][...]

Stand-a lone DVR Instructio n Manual 46 ▫ Channel Selection and Screen Conversion To change a channel, press the CHANNEL button on the remote controller or click the CHANNEL butto n on the [ Fig.6-15 PAN /TILT CONT ROL window]. It will b e converted a full scree n. To return to the LIVE mode, press the SPLIT button on the remote controller or cli[...]

6. How to Operate 47 ▫ PRESET [Fig.6-15-1 Preset Menu] It is a function to preset the PTZ camera(s) which you wish to monitor frequently. Pres et Setu p - Select a position of camera you wish to pre set and click the SET button in Fig.6-15-1. - Click the number( s) for the current position of came ra. - Delete the numbers by using ← button. Pre[...]

Stand-a lone DVR Instructio n Manual 48 6-7.8. SYSTEM STATUS ▫ Click the SYSTEM STATUS button on the MENU bar to see the system status as shown below (Fig.6-16). ▫ Click the (EXIT) button to return to th e LIVE mode or RECORD mode . [Fig.6-16 SYSTEM STAT US button] [Fig.6-17 SYSTEM S T ATUS window][...]

6. How to Operate 49 6-7.9. POWER LOSS LISTS The list indicates the time/da te when the system power wa s turned OFF. ▫ Click the POWER LOSS LIST S button on the SY STEM STATUS w indow to view th e POWER LOSS LISTS. ▫ Each of the pages contains 10 lists. You can search the pages by clicking the UP/DOWN button. ▫ Click the (EXIT) button to ret[...]

Stand-a lone DVR Instructio n Manual 50 ▫ CLEA R LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the POW ER LOSS LISTS will b e deleted. T o cancel, click the CANCEL button Fig.6-19 PO WER LOSS LISTS Message[...]

6. How to Operate 51 6-7.10. VIDEO LOSS LIST The list indicates the video loss channe l and th e time/date when the video signal w as disconnected. ▫ Click the VIDEO LOSS LISTS bu tton on the SYSTEM STATUS window to view the VIDEO LOSS LISTS. ▫ Each of the pages contains 4 lists. You can search the pages by clicking the UP/DOWN button. ▫ Clic[...]

Stand-a lone DVR Instructio n Manual 52 ▫ CLEA R LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click t he OK bu tton, the VIDEO LOSS LI STS will be deleted. T o cancel, click the CANCEL button [Fig.6-22 VIDEO LOSS LISTS Message window][...]

6. How to Operate 53 6-8. Record This system provides W atchdog function. When power goes of f during recording and then the pow er turns on, the system w ill automatically start recording. 6-8.1. Manual (Continuous ) recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD button in the SETUP menu and then the RECO[...]

Stand-a lone DVR Instructio n Manual 54 The MOTION ( ) or SENSOR ( ) as s hown in F ig.6- 24 shou ld be t urne d ON in this recording mode. ▫ Pr ess the RECOR D butto n on the r emot e cont roller or cl ick the RECOR D icon on the MENU bar . 6-8.3. Timer Recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD but[...]

6. How to Operate 55 6-8.4. Timer Event Recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD button in the SETUP menu and then the RECORD window will be displayed. ▫ Select the TIMER RECORDING ( ) between the MANUAL RECORDING ( ) and the TIMER RECORDING ( ) as s hown in F ig.6- 26. Al l channel s can be set at[...]

Stand-a lone DVR Instructio n Manual 56 6-8.5. Recording Icons The Recording Icons depends on recording modes are displayed in the upper left hand corner of the screen. ▫ To turn the Record ing Icon OFF, click the DISPLAY ON in the RECORD menu and then it will be turned OFF. You can select the value ON or OFF by repeatedly clicking the mouse. [Fi[...]

6. How to Operate 57 6-9. REPLAY 6-9.1. QUICK REPLAY It is available only by pressing the QICK SEARCH button on the remote controller. ▫ Press the PLAY button, th en the recent recorde d data will b e played. 6-9.2. REPLAY ▫ Click the REPLAY icon on the MENU bar, then the REPLAY window as shown in Fig.6-29 will be displayed. ▫ Click the (EXIT[...]

Stand-a lone DVR Instructio n Manual 58 6-9.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DVD-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding devices will be displayed as shown in Fig.6-30.[...]

6. How to Operate 59 ▫ Select the hour on the S tart Time Select Window (See Fig.6-32) by clicking the mouse on the Hour (0 – 23 hour) you wish to start to play . The green active buttons indicate t he HOUR that contains recorded data , and the red active buttons indica te the selected S tart HOUR. By using the Replay Time set-up buttons: The t[...]

Stand-a lone DVR Instructio n Manual 60 6-9.2.3. Replaying Replaying st art time set-up can be possible within a recording time e xtent. ▫ Replay buttons (NORMAL / MOTION / SENSOR) NORMAL PLAY: Click the button to play all the recorded data. MOTION PLAY: Click the button to play the recorded data by MOTION only. SENSOR PLAY: Click the button to p[...]

6. How to Operate 61 ▫ How to control the buttons while replaying ① Sear ch Slider It is possible to playback by clicking the slider on the bar or dragging it. ② PLA Y / P AUSE Click the button to pause. Click the button to replay when in the pause mode. ③ REW/FF During replaying, press the or button for fast rewind ing and fast forwarding [...]

Stand-a lone DVR Instructio n Manual 62 During replayin g, press the button to view previou s frame in still image and press the button to view the next frame in still image. ⑤ S peaker ON / OFF Turn speaker ON or OFF. ⑥ Sp e a k e r Vo l u m e Adjust the Audio Volume by clicking the ▲ or the ▼ button when the AUDIO is turned ON. 6-9.2.4. D[...]

6. How to Operate 63 - Click the mouse on one out of chann els during replaying to view a full screen. - Click the mouse on the full screen during replaying to return to the split screen. [Fig.6-37 FUL L screen during replaying] [Fig.6-36 SPL IT screen during replaying][...]

Stand-a lone DVR Instructio n Manual 64 6-10. COPY ▫ Click the COPY icon on the MENU bar, and then the COPY window as shown in Fig.6-38 will be displayed. ▫ Click the (EXIT) button to return to th e previous mode. 6-10.1. Copying dev ices In order to copy the recorded data, plug the USB devices such as external USB HDD , USB memory to the USB p[...]

6. How to Operate 65 ▫ Connect the USB devi ces to the DVR ▫ Click the SETUP icon on the MENU bar, and the SETUP menu w ill be displayed. ▫ Click the DISK MANAGER in the SETUP menu, and the DISK MENAGER will be disp layed. ▫ Click the mouse on the USB bu tton in th e DISK MANAGER, and you will be aske d. ▫ Click the OK, and then the progr[...]

Stand-a lone DVR Instructio n Manual 66 ① All channe ls, HOUR selectio n button. Click the arrow button on the upper le ft corner as shown in Fig.6-40 to set the full extent of the recording and all the channels simultaneously . ② HOUR selection button Select the sta rt time to copy by clickin g the mouse on HOUR (0-23: in the military ho ur). [...]

6. How to Operate 67 By using the S t art/End set-up bar: The starting time to cop y can also be set by clicking th e slider on the bar and dragging it or just cli ck the bar . 6-10.3. Set the Copy End Time (Copying e xtent) Refer to the above explanation (See section 6.10.2.). [Fig.6-42 Copy S tart/End setup bar] [Fig.6-41 Copy S tart/End setup bu[...]

Stand-a lone DVR Instructio n Manual 68 6-10.4. Copying the recorded da ta during replaying The system, LCD22164 allows users to copy the recorded data during replaying. ▫ Start replaying (See section 6-9). ▫ Right-click on the replaying screen, and the COPY DATA screen will be displayed (See Fig.6-43). ▫ To set the starting time and date to [...]

6. How to Operate 69 ▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See section 6-10.1). Sele ct COPY Mode Only when the device and media are ready to copy , the Ready on the co rresponding device and media will be displayed. NETW ORK COPY Save the recorded data in PC throug h the DVR Mast er by Netw ork. Click the Network b[...]

Stand-a lone DVR Instructio n Manual 70 Click the CD-R/W button to start copying. DVD-RW COPY Save the recorded data on DVD-R/W Media. Click the DVD-R/W button to start cop ying. ▫ As soon as one of the above buttons is clicked , copying will st art along with displaying the icon shown in Fig.6-45. The following icon indicates that copying is in [...]

71 7. SETUP CONTENTS 7-1. SETUP ............ ....................... ........................... ........................... ............................ .......... 74 7-2. SYSTEM ............. ............................ ........................... ....................... ............................ .. .. . 75 7-2. 1. TIME / DA TE ..............[...]

Stand-a lone DVR Instructio n Manual 72 CONTENTS 7-4. CAMERA ................................... ............................ ........................... ........................... .... .. 87 7-4. 1. C AMERA ON/OFF ... ...................... ............................ ........................... ........................ 88 7-4. 2. C AMERA N AME [...]

7. Setu p 73 CONTENTS 7-7. NETWOR K ................... ........................... ........................... ............................ ................. 1 1 4 7-7. 1. IP M ODE .................................. ........................... ............................ ...................... .... 1 14 7-7. 2. GA TEW A Y , SUBNE T , IP ADDRESS .[...]

Stand-a lone DVR Instructio n Manual 74 7-1. SETUP It is possible to set up the menus in the LIVE mode and partly in the RECORD mode. ▫ Click the “SETUP” button on the MENU bar and then the SETUP menu will be displayed. ▫ Click the “EXIT” button to return to the pre vious mode. [Fig.7-2 SETUP menu] [Fig.7-1 Setup Icon on MENU Bar][...]

7. Setu p 75 7-2. SYSTEM ▫ Click the “SYSTEM” button in the SETUP menu, and then t he SYSTEM men u shown in Fig.7-3 will be d isplayed. ▫ Click the “EXIT” button to re turn to the SETUP menu. . [Fig.7-3 SYSTEM menu][...]

Stand-a lone DVR Instructio n Manual 76 7-2.1. TIME / DATE ▫ Click the “TIME/DATE” button in the SYSTEM menu , and then the TIME/DATE me nu will be displayed (See Fig.7-4). ▫ Click the “EXIT” button to return to the SYSTEM menu. ▫ TIME FOR MA T Click the mouse on the TIME FORMAT button to change and then sele c t 24 HOUR or 12 HOUR by[...]

7. Setu p 77 ▫ DATE FORMAT There are three fo rm ats to display th e time and date as follow. • MM / DD / YYYY: Fo r U.S.A. • YYYY / MM / DD: For Asian countries. • DD / MM / YYYY: For European countries. Click the mouse on the DATE FORMAT button to change, and then select a D ATE FORMAT among YYYY/MM/DD, DD/MM/YYYY and MM/DD/YYYY. ▫ DATE[...]

Stand-a lone DVR Instructio n Manual 78 7-2.2. SYSTEM CONFIG ▫ Click the “SYSTEM CONFIG” button in the SYST E M menu, a nd then the SYSTEM CONFIG menu will be displayed (See Fig.7-10). ▫ Click the “EXIT” button to return to the SYSTEM menu. 7-2.2.1. FACTORY DEFAULT ▫ Click the “ FACTORY DEFAULT ” button in the SYSTEM CONFIG menu, [...]

7. Setu p 79 7-2.2.2. LOAD CONFIG / BACKUP CONFI G You can save up to four differen t settings in the BACKUP CONFIG and load the file s in the LOAD CONFIG to ch ange the settin gs to the system. ▫ LOAD CONFIG This function is to lo ad the changed settings to the syste m. - Click t he LOAD CONFIG button and then the LOAD CONFIG w indow will be dis[...]

Stand-a lone DVR Instructio n Manual 80 ▫ BACKUP CONFIG This function is to save the c urrent settings to load the se ttings to the system. Sa ve the current settings in the BACKUP CONFI G in order to load it to the syste m in the near future whenever you need to ch ange the settin gs . - Click t he BACKUP CONFIG button and then t he BACKUP CONFI[...]

7. Setu p 81 7-2.3. PASSWORD ▫ ON/OFF Select ON or OFF b y clicking the mouse. If the ON is se lected, the password has to be entered to get in to the SETUP mo de, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the DVR Maste r . ▫ PASSWORD CHANGE Click the password “********” b utton and then the On Scre[...]

Stand-a lone DVR Instructio n Manual 82 7-2.4. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on each of the syste m s. You don’t have to assign a n y ID on the single unit and you can control the system w ith the provided remote controller without IR REMOTE ID, which is i[...]

7. Setu p 83 7-2.5. FIRMWARE UPDATE There are two ways to update the firmware through USB m emory and the DVR Master (GUI). We recommend use rs to update the firmware only in the LIVE mode. ▫ By USB mem ory - Format the USB with your computer and save the firmware file on it (not in c luding folder). - P lug it on t he USB por t on the DV R. - Cl[...]

Stand-a lone DVR Instructio n Manual 84 7-3. DISK MANAG E R ▫ Click the “DISK MANAGER” button in the SETUP menu and then the DISK MANAGER window w ill be displ ayed (See Fig.7-22). ▫ A DV D R/W(US B) an d 1 Hard D isk D rives can be i nstal led, and all infor matio n in reg ards to the drives will be automatically displayed on the DISK MANA[...]

7. Setu p 85 7-3.1. HDD WRITE FAIL If the HDD is i n full and the OVERWRITE is turned OFF in the recording mode, the syste m will activate the relay output (See section 5 -4.3) for a siren or other device. ▫ Click the HDD WRITE FAIL butt on in the DI SK MANAGER window and select “RELAY OUT” or “DISABLE”. 7-3.2. HDD OVERWRITE ▫ Click the[...]

Stand-a lone DVR Instructio n Manual 86 [Fig.7-25 HDD FORMAT window][...]

7. Setu p 87 7-4. CAMERA ▫ Click the “CAMERA” button in the SETUP me nu and then the CAMERA menu will be displayed (See Fig.7-26). To change the settings in the CAMERA menu, stop recording by clic king th e RECORD icon on t he MENU B AR. It is possi ble only i n the LI VE mode. ▫ Click the UP/DOWN button on the right hand side of the CAMERA[...]

Stand-a lone DVR Instructio n Manual 88 7-4.1. Camera ON/OFF ▫ Click on each of the channels to select the “ O ” or “ X ” in t he CAMERA menu . If the “ O ” is selected, the corresponding video channels (CAM 01 through CAM 016) will be displayed on the screen. If the “ X ” is selected, the corresponding video channels (CAM 01 thro[...]

7. Setu p 89 7-4.3. Buzzer In order to a l ert u sers, the Buzzer will sound at that time video sign al lost. ▫ Click on each of the channels you wish to turn the bu zzer “ON” or “OFF”. If the “ O ” i s selected, the b uzzer will sound when video signal lost and if t he “ X ” is selected , the buzze r won’t sound. 7-4.4. Relay T[...]

Stand-a lone DVR Instructio n Manual 90 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT button on the corresponding channels in the CAMERA menu, then the PAN/TILT window will be displayed as shown in Fig.7-33. ▫ Click the (EXIT) button to return to the CAMERA me nu. ▫ PTZ ID - Click the PTZ ID b utton in the PAN/TILT window, then On Screen K ey[...]

7. Setu p 91 ▫ Pan/Tilt Vendor select Click the “PAN/TILT & REMOTE” button in the PAN/TILT window, then the vendor lists w ill show up. Select a vendor on the vendor lists by clicking the mouse. ▫ Model Click the “MODEL” button in the PAN/TILT w i ndow and select the model on the pop-up lists by cl icki ng the mou se. [Fig.7-37 PAN/[...]

Stand-a lone DVR Instructio n Manual 92 ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT window and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps on the Baud Rate pop-up window by clicking the mouse. ▫ Data Bits Click the “DATA BITS” button in the PAN/TILT window and choose a[...]

7. Setu p 93 ▫ Stop Bit s Click the “STOP BITS” button in the PAN/TILT window and select 1 or 2 on the Stop Bits pop-up window by clicking the mouse. ▫ Parity Bit Click the “PARITY BITS” button in the PAN/TILT window and choose a value among NONE, ODD, EVEN , STICK and ZERO on the P ari ty Bits pop-up win dow by clicking the mouse. [Fig[...]

Stand-a lone DVR Instructio n Manual 94 7-4.6 Display ▫ Click the DISPLAY button in the CAMERA menu and select the ON or OFF. If the “ON” is selected, the camera na m e (camera title) in th e LIV E mode will be displayed on the screen. If the “OFF” is selected, th e camera name (camera title) in the LIVE mode won’t be displayed. 7-4.7 S[...]

7. Setu p 95 7-5. AUDIO ▫ Click on the AUDIO button in the SETUP menu and then the AUDIO menu will be displayed on the screen. ▫ Click the (EXIT) button to return to the SETUP me nu. [Fig.7-49 AUDIO menu] 7-5.1. Audio Recording ON/OFF ▫ Click the REC (audio recording) button in the AUDIO menu and select the “ O ” or “ X ” by clicking [...]

Stand-a lone DVR Instructio n Manual 96 7-6. RECORD ▫ Click the “RECORD” button in the SETUP menu and then the RECORD menu will be displayed as shown in Fig.7-52. ▫ Click the UP/DOWN button on the right hand side of the RECORD menu to switch the page. ▫ Click the (EXIT) button to return to the SETUP me nu. 7-6.1. Record ICON Display ▫ T[...]

7. Setu p 97 7-6.2. All Manual / Timer recording button ▫ Click the All Manual / Timer re cording button in the RECORD menu, then the All Manual / Timer recording button will be d isplayed as shown in Fig.7-55. ▫ Select t he Ma n ual Recording button or Timer Recording button for all the channels by cli cking t he mous e in Fig. 7-55 . ▫ See [...]

Stand-a lone DVR Instructio n Manual 98 7-6.3. All Motion ON / OFF, Sensitivity Setting ▫ Click the button in the RECORD menu, then the ALL MOTION setup pop-up window will be displayed as show n in Fig.7-57. ▫ By clicking th e mouse , select the on the pop-up window (See Fig.7-57) to enable the system to start recording by motion detection for [...]

7. Setu p 99 7-6.4. All Sensors ON / OFF ▫ Click the button in the RECORD menu, then the ALL SE NSOR setup pop-up window will be displayed as show n in Fig.7-60. ▫ By clicking th e mouse , select the on the pop-up window (See Fig.7 - 60) to enable the system to start recording by Sensor (Passive Infrared Se nsor) for all the channel s. ▫ By c[...]

Stand-a lone DVR Instructio n Manual 100 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Seconds: Recording Speed) button on each of the channe ls in the RECORD menu, then the Recording Speed pop-up window will be displayed as shown in Fig. 7-64. ▫ Select one of the Recording Speed among AUTO, 30, 15, 10 , 7, 5, 3, 2, 1 and OFF on the pop-up[...]

7. Setu p 101 30 25 15 12 10 8 7.5 6 5 5 3 3 2 2 1 1 NTSC OFF PA L OFF 7-6.7. Recording Quality ▫ Click the QUALITY b utton on each of the channels in the RE CORD menu, then the QUALITY pop-up window will be displayed as show n in Fig.7-67. ▫ Select one of the Recording Quality among LOW, NORMAL, HIGH and BEST on the pop- up window by clicking [...]

Stand-a lone DVR Instructio n Manual 102 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording ), which keeps reco rding continuously if the O VERWRITE is set ON in the DI SK MANAGE menu. This Manua l Recording mode is not only one of the most popular Recording modes for users, bu t [...]

7. Setu p 103 7-6.9. Recording by Motion Detection When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for e ach of the channels) and de tected motion of objects, the system begins recording automatically. The recording icon on the MENU bar should be selected in this recording mode. If not, it won’t[...]

Stand-a lone DVR Instructio n Manual 104 ▫ Pre-Alarm Time Setup Allows y ou to record a se ction of video just pr ior to Mo tion or Sensor activation. Click the mouse on the PRE in the MOTION me nu and choose one of the values among 0, 1, 2, 3, 4 and 5 seconds with the mouse’s wheel, and then click it to save. ▫ Motion Hold Time Setu p The sy[...]

7. Setu p 105 ▫ Spot Setup If the “ON” is selected by clicking the mouse on th e SPOT button in the MOTION menu, a full screen will display when a motion is detected. If the “OFF” is selected, the full screen won’t be displayed even though motion of objects is detected. ▫ Region The Motion Detection Area displays in blue on the screen[...]

Stand-a lone DVR Instructio n Manual 106 - All Clear Click the ALL CLEAR button in the MOTION me nu in order to clear the Motion Detection Area, then the window turns to white color as shown in Fig.7-77. Right-click on the curren t window to return to the MOTION me nu. [Fig.7-76 ALL CLEAR button] [Fig.7 - 77 All Clea red scree n] CURSO R[...]

7. Setu p 107 By Window Se t Click the WINDOW SET button in the MOTION menu on each of the cameras and click one of cells (1,320 cells in total) for the starting point of the area which you would like to designate, and then click the other one of cells for the ending point of area un til the motion detection area is the size you want it to b e. The[...]

Stand-a lone DVR Instructio n Manual 108 - Window Clear Click the WINDOW CLEAR button in the MOTION me nu in order to clear the Motion Detection Area, and then the motio n detection area you have created will be disp l ayed. Click the starting point and the ending point as much as you w ish to clear or it can be cleared by ALL CLEAR as described ab[...]

7. Setu p 109 By Each Cell Click the EACH CELL button in the MO TION menu on each of the came ras and click the mouse on each of the cells as much as you would like to designate the Motion Detection Area. To cl ear, c lick th e design ated c ells. Right-click on the current w indow to return t o the MOTI ON menu. [Fig.7-82 EACH CELL button] [Fig.7-[...]

Stand-a lone DVR Instructio n Manual 11 0 ▫ Map V iew Click the MAP VI EW button in the MOTION menu to view the current settings for Motion detection area. Right-click on th e current window to return to the MOTION me nu. Note : Please pay attention to the follo wing directions in order to use the Motion Detection function properly: • Adjust th[...]

7. Setu p 111 7-6.10. Recording by Sensor (PIR S ensor) ▫ Click t he mouse on the bu tton for each of the channels in th e RECORD menu and then the SENSOR men u will be displa yed on the scree n as shown in Fig.7-86. ▫ Click the (EXIT) button to return to the RECORD menu. ▫ ON/OFF The system w ill start recording when an Alarm is detecte d an[...]

Stand-a lone DVR Instructio n Manual 11 2 ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click the mouse on the PRE in the SENSOR menu and choose one of the values among 0, 1, 2, 3, 4 and 5 seconds with the mouse’s wheel, and then c lick it to save. [Fig.7-88 Pre-Alarm T ime Setup button] [Fig.7-[...]

7. Setu p 11 3 ▫ Alarm Hold Time Setup The system continues recording for the Alarm HOLD TIME and finishes the recording. Click the mouse on the HOLD in the SENSOR menu and choose one of the values among 1 through 30 seconds with th e mouse’s w heel, and t hen click it to save. ▫ Spot Setup If the “ON” is se lected by clicking the mou se [...]

Stand-a lone DVR Instructio n Manual 11 4 7-7. NETWORK ▫ Click the “NETWORK” button in the SETUP menu and then the NETWORK menu will be displayed on the screen as shown in Fig.7-92. ▫ Click the (EXIT) button to retu rn to the SETUP menu. 7-7.1. IP Mode When the system uses the same IP addre ss every time it connects to the network, it is kn[...]

7. Setu p 11 5 7-7.2. GATEWAY, S UBNE T, IP ADDRESS ▫ Click the GATEWAY / SUBNET / IP ADDRESS button in the STATIC IP MODE and t hen the On Screen Keyboard will appear. ▫ Delete th e current valu es with the but ton an d enter the ad dress numbe rs by us ing On Screen Keyboard, and then click OK button to set with new addr ess. ▫ Click the CA[...]

Stand-a lone DVR Instructio n Manual 11 6 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the ne twork viewer. I t can be set from 1 to 65535 values. ▫ Click the PO RT button and then the On Scre en Keyboard will show up. ▫ Delete the cu rrent port number w ith the button and enter the new port number by usin[...]

7. Setu p 11 7 7-7.4. MAC ID ▫ MAC ID is connecting address for Ethernet, every unit has 12 di git addresses (HEX 6 byte). MAC ID was already assigned with the factory default value. User can not change it. 7-7.5. MNS (MAC NAME SERVER) As a sort of DDNS, two servers in our company (CLOVER) are being operated so that our client can access DVR with[...]

Stand-a lone DVR Instructio n Manual 11 8 ▫ IP ADDRESS / PO RT DO NOT CHANGE THE IP ADDRESS AND PORT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO ACCESS YOUR DVR WITH A DYNAMIC IP ADDRESS. IF Y OU CHANGE THEM, Y OU CAN’T NOT ONLY USE OUR MNS (MAC NAME SERVER), BUT ALSO YOUR NETWORKING WILL BE DISCONNECTED. ▫ SITE NA ME The[...]

7. Setu p 11 9 7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM) ▫ Select t he DDNS bu tton in the NETWORK menu by clic king the mouse or pressing the buttons on the remote controller. The DDNS menu will show up as shown in Fig.7-103. ▫ To return to the NETWORK menu, Click the (EXI T) button. ▫ If y ou were i n the m iddle of ente ring v alues on the [...]

Stand-a lone DVR Instructio n Manual 120 ▫ USER ID - Click t he USER ID in the DDNS menu and type the USER ID registered to the DDNS server by using the On Screen Keyboard. - After changing the values, clic k on the OK button . ▫ PASSWORD - C lick t he PASSWO RD in the DDNS men u and ty pe the PAS SWORD re gist ered to th e DDNS server by using[...]

7. Setu p 121 7-7.7.2. Registration to the DDNS server Visit at www .dyndns.org to register . Registration to DYND NS.ORG 1. Visit at www .dyndns.com . 2. Sign up for a new user name and a p ass word: Click the Create A ccount on the upper right hand corner . 3. After signup new user , check your e-mail and confirm an e-mail from dyndns.com. 4. Go [...]

Stand-a lone DVR Instructio n Manual 122 7-7.8. EMAIL NOTIFICATIO N ▫ Email notification e nables to notify even ts (sensor, motio n, video loss, p ower on/off, pow er loss, record on/off, record fail, replay or copy start/stop) by sending emails to one or two email accoun t s. [Fig.7-108 Email Notification wind ow][...]

7. Setu p 123 ▫ EMAIL ADDRESS SETUP [Fig.7-109 Email Address setup] - Click one of email address boxes a nd then the On Screen Keyboard will show up a s shown Fig.7-109. - Delete the curre nt email address with the button and enter an email address by using the On Screen Keyboard. - If necessary, cli ck the button to ente r upper case s. - Click [...]

Stand-a lone DVR Instructio n Manual 124 ▫ EVENT Setu p - Click the check boxes below to choose the events you need. - To delete, click the check box again. [Fig.7 -111 E vent setup] ▫ INTERVAL TIME Setup - Click the INTERVAL TIME (see Fig.7-112) to set the interval time o f sending emails an d then choose the time (in minutes) on the pop-up wi[...]

7. Setu p 125 Note : If the motion is selected in Fig.7-1 12, you may receive numerous emails from the DVR systems due to a couple of factors such as continuous moving objects, a strong and changing lighting source, low resolution and noises o f cameras. In case of this, select a longer INTER V A L TIME and refer to “Note for Motion Detection Fun[...]

Stand-a lone DVR Instructio n Manual 126 7-8. VIDEO ENHANCE ▫ Click the VIDEO ENHANCE button in the SETUP menu to enhance the picture quality (Contrast and Brightness) on each of cha nnels and then the VIDEO ENHANCE menu w ill show u p (See Fig. 7-1 1 3). ▫ To return to th e SETUP menu, cl ick the (EXIT ) button. [Fig.7-113 VIDEO ENHANCE ][...]

7. Setu p 127 7-8.1. VIDEO ENHANCEMENT ON EACH CAMERA ▫ Click on an INPUT button in the VIDEO ENHANCE menu. ▫ The CONTRAST and BRIGHTNESS sliders will be displayed along with camera picture as shown in Fig.7-114. ▫ Adjust Contrast and Brightness with the sliders by clicking the mouse. ▫ To return to the VIDEO ENH ANCE menu, Click the (EXIT)[...]

Stand-a lone DVR Instructio n Manual 128 7 -8.2. VIDEO ENHANCEMENT ON VGA OUTPUT It is possible to enhance VGA signals only with the MENU/ENTER key on the bottom of the system. ▫ To dis play the MENU, press the MENU/ENTER key to change the values. The changes should be made in about 15 seconds. After that, the MENU will be disappeared. ▫ Choos [...]

129 129 8. Remote Host Program 8[...]

Stand-a lone DVR Instructio n Manual 130 CONTENTS 8-1. REMOTE PROG RAM OVER VIEW ................... ....................... ........................... ............. 131 8-2. INST ALLING TH E PROGRAM TO PC ...... ........................... ............................ ................. 132 8-3. INTERNET EXPLORER .... ........................... .[...]

8. Remote Host Pr ogram 131 8-1. Remote Program Overvi ew The Remote Host Program allow s you to view live video, search archived video, control PTZ camer as and t o set up the exac t same m enus as the DVR does. The DVR system can have up to 10 simultaneous Remote Connections. Each user can performs on the DVR system and will not af fect the other[...]

Stand-a lone DVR Instructio n Manual 132 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as f ollow s . How to install the pro gram 1. Start the operating system (Window s 2000/XP/VISTA). 2. Insert the program CD into CD-ROM drive. 3. Open My Computer , an d then s elect CD-ROM drive. 4. Double click Set[...]

8. Remote Host Pr ogram 133 8-3. Internet Explorer When you are trying to use this function, it is high ly r ecommended that the p assword should be turned ON in the SYSTEM menu not to enab le unauthorized personnel to access your DVR system (See section 7-2.3). Up to 10 users can remo tely access yo ur DVR with the H OST N A ME. How to setup t he [...]

Stand-a lone DVR Instructio n Manual 134 • Click on the follow ing message. This site wants to inst all the following add-on: ‘DVR Master’ from ‘Clover Electron ics USA ’. If you trust the website and the add-on and want to insta ll it, c lick here…. • Click the cl ick in s t a ll ActiveX Contr ol …. on the pop-up screen and the fol[...]

8. Remote Host Pr ogram 135 8-4. Remote Host [Fig 8-5. DVR Mast er] ○ 12 ⑧⑨⑩ ○ 16 ○ 13 ○ 14 ○ 15 ④ ⑥ ⑤ ⑦ ① ② ③ ⑪[...]

Stand-a lone DVR Instructio n Manual 136 Table. Desc rip t ion of Rem ote Host Progr am But ton ① Minimization Button ② Close But ton ③ Current Time ④ Connection But ton ⑤ Setup Button ⑥ Player Executio n Button ⑦ Captur e Button ⑧ Multi- Mode ⑨ Termi nal Mode ⑩ E-map Butt on ⑪ Splits the screen in 4, 9 & 16ch. ○ 12 PAN [...]

8. Remote Host Pr ogram 137 8-4.1. Setup ① Version number It represents the current version number of the Firmw are. ② Copy Refer to Section 8-4.10 in regards to copying methods after selecting one between the Quick Copy a nd the Live + Co py. ▫ Quick Copy Click on the Quick Copy for faster copying the recorded data from the DVR to the Host P[...]

Stand-a lone DVR Instructio n Manual 138 ③ Network Image ▫ Size Choose a Size (Resolution) among D1, Half D1 and CIF you wish to displa y on the DVR Master by clickin g the mouse. This setting does not affect the DVR. ▫ Quality Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the DVR Master by clickin g the mouse. This setti[...]

8. Remote Host Pr ogram 139 [Fig.8-7 Firmware Files][...]

Stand-a lone DVR Instructio n Manual 140 8-4.2. Connection There are two ways to access the DVR through the DVR Master as follow s. ▫ With Set Direct setting - Click the “CONNECT” button on the DVR Master and then the “Connect Dialog menu” as shown in Fig. 8-8 will be di splayed. - Click the “Set Direct” in the Connect Dialog menu and[...]

8. Remote Host Pr ogram 141 - Choos e a Dom ain Nam e in the N ame Li sts and c lick th e “CONNE CT” but ton in order t o access the DVR. - T o register the Domain name (Host Na me), refer to section 7-7.7.2 on page 121. [Fig.8-8 Connect Dialog] 8-4.3. Capture The current images on the screen will be captured a nd saved in the Printed Files (Op[...]

Stand-a lone DVR Instructio n Manual 142 8-4.4. Status If the Status button on the DvrMaster is selected by clicking the mouse, the DvrMaster displays the DVR’s status related to connections of cameras, s ensors, relay outputs and remaining HDD (Hard Disk Drive) capacity available for re cording. [Fig.8-9 ST A TUS MODE] Status button[...]

8. Remote Host Pr ogram 143 8-4.5. Replay It is possible to replay the recorded data from the DVR system by using the Replay button in Fig.8-10 in the Multi mode only (refer to section 8-4.9.2). - Click the Replay button as shown in Fig.8-10 to playback the recorded data from th e DVR system, and then the Replay T ime Setup Window will be displayed[...]

Stand-a lone DVR Instructio n Manual 144 ▫ Play back C ontro l Playba ck control b uttons : Button for fast rewinding up to 128 times by repea tedly pressing. : Button for viewing previous frame in still image. : Play button. : Button for viewing the next frame in still image. : Button for fast forwarding up to 128 times by repeatedly pressing. :[...]

8. Remote Host Pr ogram 145 8-4.6. COPY It is possible to copy the recorded data fro m the DVR system to a client PC by using the Copy button in Fig.8-13 in the Multi mode only (refer to section 8-4 .9.2). - Click the Copy button as shown in Fig.8-13 to copy the rec orded data from the DVR system to a PC, and th en the Copy Time S etup Window w ill[...]

Stand-a lone DVR Instructio n Manual 146 “ALL” in yellow represents that all the cameras are se l ected. The camera channel number(s) in yellow repr esents tha t the corresponding channel(s) are selected . - Click the Copy ( ) button and then the copying progressive bar a s shown Fig.8- 15 will show up. - While copying, click the S top button i[...]

8. Remote Host Pr ogram 147 8-4.7. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the DvrMaster as shown Fig.8-16 a n d then the current screen size will be enlarged to fit the monitor’s screen size, but the r esolution will be lowered. ▫ Click the “FULL SCREEN” b utton again to go back to the NO RMAL SCRE[...]

Stand-a lone DVR Instructio n Manual 148 8-4.8. Speaker / Microphone Buttons of Remote Host Program ① Audio Input channel selection: Select the same au dio channel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking the mouse. ③ PC Microphone ON/OFF: Turn the Microphone ON or OFF by clicking the mouse. ④ PC Speaker V[...]

8. Remote Host Pr ogram 149 8-4.9. Connection mode There are two kinds of connection mode (See Fig.8-19) on the DvrMaster . Select one of them by cl icki ng the mo use dep endin g on you r appli catio n. 8-4.9.1. Terminal mode The f unction s of ic ons suc h as Rec ordin g, Play , C opy , S etup, S ystem Status, Pan/ T ilt, Display , Zoom and OSD o[...]

Stand-a lone DVR Instructio n Manual 150 8-4.9.2. Multi mode It is impossib le to control (Recording on/o ff, Se tup, System Status, Display and OSD) the DVR system in the Multi mode except Replaying and Copying (See section 8-4.5, 8-4.6 on page 143-145 ), but the ima ge of channel 16 w ill always disp l ay on the monitor and the DvrMa ster. - Clic[...]

8. Remote Host Pr ogram 151 8-4.10. Copy in the Terminal mode There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the Multi mode. The recorded data will be saved in the Backup Files (Open Windows Explorer – click My Computer - click the Program Files – click DvrMaster – click Backup Files) through the NETWORK, but the ot[...]

Stand-a lone DVR Instructio n Manual 152 [Fig.8-22 Copying in the T erminal mode] [Fig.8-23 Copy Completion ][...]

8. Remote Host Pr ogram 153 8-4.11 E-Map E-Ma p enabl es us ers to d ispla y the ca meras on the di gital ma p for bet ter m onito ring. The digital map should be a BMP f ile and you can make it (the higher resolu tion the better) or use the E-map samples saved in the E-ma p folder (See Fig.8-26). 8-4.11.1. Addition of ma p - Click the E-Map button[...]

Stand-a lone DVR Instructio n Manual 154 - To rename, right-click a saved eMap list and click “Rename” on the pop-up window as shown in Fi g.8- 27 . - To delete, right-click a saved eMap list and click “Delete eMap” on the pop-up window as shown in Fig.8-28 . - To display, double-click one of saved eMap lists. The ima g e size of ea ch chan[...]

8. Remote Host Pr ogram 155 8-4.11.3. Usage of camera position The small squares with channel numbers on the map indicate the camera position. The blue screen represents that the corresponding camera is not connected to the DVR system. - Doub le-c lick the im age t o display a full s creen. - To change the camera position, click the image and drag [...]

Stand-a lone DVR Instructio n Manual 156 8-4.12 Pan / Tilt & Preset Y ou can control the PTZ camera thro ugh DvrMaste r . This featu re is basically id entical to w hat the DVR system has. Refer to section 6-7.7 P AN/TIL T on p a ge 45 . [Fig.8-32 P AN / TIL T] PRESET / RUN FOCUS ZOOM PA N / T I LT CHANNEL SELECT[...]

8. Remote Host Pr ogram 157 8-5. PLAYER [Fig.8-32 Player] Char t. Butto n of P l ayer P r ogram ① Status w indow ( Play mode, D ate, Time) ② Calendar ③ Convert to AVI File ④ Search button for replaying ⑤ Capt ure bu tton ⑥ Prin t butto n ⑦ Vide o En hance ⑧ Division bu tton ⑨ Playback (Replay) speed Control ⑩ Search slider for R[...]

Stand-a lone DVR Instructio n Manual 158 ① Status w indow (Play mode , Date, Time ) It indicates th e play mode , date and time . ② Calend ar It shows the date currently being rep layed. [Fig.8-34 Calendar] ③ Convert AVI File Convert the recorde d files to AVI files. - Click the Conve rt AVI button on the Player and the Convert AVI w i ndow w[...]

8. Remote Host Pr ogram 159 [Fig.8 -35 Convert AVI window] [Fig.8-36 Backup F iles by Networking] [Fig.8-37 DvrRecData by USB][...]

Stand-a lone DVR Instructio n Manual 160 [Fig.8 - 38 Select one of the Channels] [Fig.8 -39 S tart Convert Button] How to play the A VI fi l es By using Windows media player: - Click the OPEN button on the Convert AVI w indow and double click one of the AVI files to play. The AVI files will save in the AVI Files folder (Open Windows Explorer – cl[...]

8. Remote Host Pr ogram 161 ④ Search button for Replaying - Click the Search button on the Play er and the Browse for Folder will be disp layed. - Select the folder that contains the recorded data and click the OK button on the Brow ser for Folder. One channel or all the channels can be replayed depending on the selection. ⑤ Captu re but ton - [...]

Stand-a lone DVR Instructio n Manual 162 ⑦ Video Enhance Refer t o section 8-4.1 on page 137. ⑧ Division button Select one of the following divisions while repl aying. ⑨ Playback (Replay) Speed Control Move the slider with the mouse to control the replaying speed. The “0” represents the normal speed, “-“and “+” represents slow spe[...]

8. Remote Host Pr ogram 163 ⑩ Search slider for replaying The slider can be move d left and right by clicking the slider on the bar and d ragging it or just click the bar to search the recorded data. ⑪ Replay Control Refer to se ction 6-9 .2.3. ⑫ Volume Contro l. Control the volume when replaying in the full screen mode ○ 13 Exit button Cli[...]

164 9. HDD Installation CONTENTS 9-1. HDD (HARD DISK DRIVE) INST ALLA TION............ ....................... ........................... ........ 165 9[...]

9. Installation of additional HDD s 165 9-1. HDD (Hard Di sk Drive) INSTAL LAT I ON The system manufacturer already installed a large space of Hard Disk Drive (refer to the retail box for capacity) in the system. Just in case, refer to the following exp lanation on how to install a HDD. ▶ The power switch must be turned off before installing and [...]

Stand-a lone DVR Instructio n Manual 166 ▶ After pushin g the HD D to the left and s ecure ly fix the bracke t to the system wi t h tw o screw s . Connect the power connector and the data cable to the HD D. ▶ After pushin g the HD D to the right and sec ure ly fix the bracke t to the sy stem with tw o screws.[...]

9. Installation of additional HDD s 167 ▶ Assemble the HDD cove r and secur ely fix it to the syste m with two screw s. ▶ Plug the AC power cord to the system and an AC ou tlet. Turn on the power switch on the back of the system and the following window will be displayed. Check the power cable and the data cable connection if the syste m fails [...]

Stand-a lone DVR Instructio n Manual 168 ▶ Update the Firmware w ith USB memory (or CD- RW/DVD-R W ). - Copy the Firmware to USB memory (or CD-RW/D VD-RW). -Pl ug the USB memory to USB Por t of the system and sel ect USB/CDRW/DVD o n the f ollo wing wi ndow . ▶ If the Firmware is d etected, the Firmware lists will be showed up as below . ▶ Wh[...]

169 APPENDIX CONTENTS RECORDING TIME T ABLE ........................... ............................ ........................... ................... 170 FA C T O R Y DE F AUL T SETTINGS ..... ...................... ............................ ........................... ..........171[...]

Stand-a lone DVR Instructio n Manual 170 Recording time table HDD : 750GB , Based on 16 cameras Recording Res olution : CIF(3 60 X 240) DA YS 30 fps 15 fps 10 fps 7.5 fps 5 fps 3 fps 2 fps 1 f ps (480fps) (240fps) (160fps) (120f ps) (80fps) (48fps) (32fps) (16fps) Each CH (16CH/fps) BEST 18. 22 36.44 54.66 72.88 109.32 182 .20 273.30 546.60 HIGH 28[...]

171 Factory default settings (1) LIVE SCREEN 16 SPLIT OSD ON (2) TIME / DATE DISPLA Y : ON TIME FORMA T : 24 HOUR DA TE FORMA T : YYYY/MM/DD (3) LOAD / BACKUP CONFIG NONE LISTS (4) USER ACCOUNT PASSWORD : SET YOUR PASSWORD ( THE PASSWORD IS NULL ) PASSWORD ON/OFF : OFF (5) IR REMOTE ID OFF (6) HDD OVERWRITE ON (7) CAMERA ACTIVE : ALL ON NAME : CAM [...]

Stand-a lone DVR Instructio n Manual 172 (8) AUDIO AUDIO 1 : RELA TED CAMER A CH 1, RECORD O FF , LEV EL 5 AUDIO 2 : RELA TED CAMER A CH 2, RECORD O FF , LEV EL 5 AUDIO 3 : RELA TED CAMER A CH 3, RECORD O FF , LEV EL 5 AUDIO 4 : RELA TED CAMER A CH 4, RECORD O FF , LEV EL 5 AUDIO 5 : RELA TED CAMER A CH 5, RECORD O FF , LEV EL 5 AUDIO 6 : RELA TED [...]

173 HOLD : 1 sec. SPOT : OFF (10) NE TWORK TYP E : DY NAMIC PORT : 1 13 SERVER 1 MOD E : DISABLE SERVER 1 IP ADDRESS : 65.60.84.25 SERVER 1 POR T : 300 SERVER 2 MOD E : DISABLE SERVER 2 IP ADDRESS : 221.149.149.1 17 SERVER 2 POR T : 300 SERVER SITE NAME : SXXX XXX (MAC ADDRESS) (11) VIDEO - CAMERA INPUT BRIGHTNESS : 128 (Ma x. 255) CONTRAST : 128 ([...]

Stand-a lone DVR Instructio n Manual 174 FAQ CONTENTS I CANNOT LOGIN ..... ........................... ....................... ............................ ........................... .....175[...]

175 I can not login ▶ Plea s e check if the link LED of DVR and LAN port of PC are lit. ▶ Plea s e check if the IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR (Available on LIVE mode and RECORD mode.) MY IP : x xx.xxx. xxx. x xx Check Target IP Addres s by clic king CONF but ton of P C host progr[...]

Stand-a lone DVR Instructio n Manual 176 Limited 1Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it for free for 1 year on parts and labor from the d[...]

177 How to obtain Factory Service • Original purchaser must f ill out the warranty card and mail it to the factory with the model number, serial number and the date of purchase. • We will re pair or replace, and return the system to the ow ner under this limite d warranty. • Please pack the system carefully and securely using the original pac[...]