Deutsch dropdown-ico

Contec SPI-8451-LLVA Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Contec SPI-8451-LLVA an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Contec SPI-8451-LLVA, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Contec SPI-8451-LLVA die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Contec SPI-8451-LLVA. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Contec SPI-8451-LLVA sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Contec SPI-8451-LLVA
- Den Namen des Produzenten und das Produktionsjahr des Geräts Contec SPI-8451-LLVA
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Contec SPI-8451-LLVA
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Contec SPI-8451-LLVA zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Contec SPI-8451-LLVA und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Contec finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Contec SPI-8451-LLVA zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Contec SPI-8451-LLVA, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Contec SPI-8451-LLVA widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    SBC Series Single Board Computer Full Size PICMG with LANx2, VGA, Audio SPI-8451-LLVA SPI-8452-LLVA with LAN, VGA, Audio SPI-8451-LVA User’s Manual CONTEC CO.,LTD.[...]

  • Seite 2

    SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA i Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed below. Check, with the following lis t, that your package is complete. If you discover damaged or missing item s, contact your retailer. Product Configuration List - Board (One of the following) [ S[...]

  • Seite 3

    ii SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Copyright Copyright 2007 CONTE C CO., LT D. ALL RIGHTS RESERVED. No part of this document may be copied or reprodu ced in any form by any means without prior written consent of CONTEC CO., LTD. CONTEC CO., LTD. makes been considered in the pr eparation of this document. Should you notice an omission or[...]

  • Seite 4

    SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA iii Table of Contents Check Your Packag e ................................................................................................................................ i Copyright ..........................................................................................................................[...]

  • Seite 5

    iv SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA RS-422 / RS-485 specifica tions ................................................................................................. ............ 24 IDE RAID Connector: CN14, CN8 (SPI-8451- LLVA onl y) ................................................................ 25 Audio Connect or: CN9 ..............[...]

  • Seite 6

    SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA v Deleting an arra y .............................................................................................................. .............. 50 Rebuilding a mirrored Array .................................................................................................... ...... 51 Viewing Controll[...]

  • Seite 7

    vi SPI-8451-LLVA, SPI-8452-LLVA, SPI -8451-LVA[...]

  • Seite 8

    1. Introduction SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 1 1. Intr oduction This product is a full-size PICMG single-board computer that uses the Intel(R) 845GV chipset and can mount a 1.7G - 2.8GHz (FSB400/533M Hz) Intel(R) Pentium(R) 4 processor. The board supports a maximum of 2GB DDR SDRAM and features an all -in- one design that incorporat[...]

  • Seite 9

    1. Introduction 2 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Option List CPU PCP4-28S Pentium 4 2.8GHz CPU with HeatSink-FAN *1 PCP4-28 Pentium 4 2.8 GH z CPU with HeatSink-FAN *2 PCP4-24 Pentium 4 2.4GHz CPU with HeatSink-FAN *2 PCP4C-20S Celeron 2.0GHz CPU with HeatSink-FAN *1 PCP4C-20 Celeron 2.0GHz CPU with HeatSink-FAN *2 *1 This board requir[...]

  • Seite 10

    1. Introduction SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 3 Customer Support CONTEC provides the following support services for y ou to use CONTC products more efficiently and comfortably. Web Site Japanese http://www.contec .co.jp/ English http://www.contec .com/ Chinese http://www.contec.com.cn/ L atest product information CONTEC provides up-t[...]

  • Seite 11

    1. Introduction 4 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Safety Info rmation This document provides safety information using th e following symbols to prevent accidents resulting in injury or death and the destruction of equipm ent a nd resources. Understand the m eanings of these labels to operate the equipment safely. DANGER DANGER indicates[...]

  • Seite 12

    1. Introduction SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 5 Environments Use this product in the following environment. If us ed in an unauthorized environm ent, the board may overeat, malfunction, or cause a failure. Operating temperature 0 - 60 o C Operating humidity 10 - 90%RH (No condensation) Corrosive gases None Floating dust particles Not[...]

  • Seite 13

    1. Introduction 6 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA[...]

  • Seite 14

    2. System Refere nc e SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 7 2. System Refer ence Specification Table 2.1. Functional Specifications [ S P I-8451-LLVA, SPI-8452-LLVA] < 1 / 2 > Specific ations Type SPI-8451-LLVA SPI-84 52-LLVA CPU(Option) Intel(R) Pentium(R) 4 Pr ocessor 1.7G - 2.8GHz (FSB400/533MHz) Intel(R) Celeron(R) Processor 1.7G[...]

  • Seite 15

    2. System Refere nc e 8 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Table 2.1. Funct ional Specifications [SPI-8451-LLVA, SPI- 8452-LLVA] < 2 / 2 > Specific ations Type SPI-8451-LLVA SPI-84 52-LLVA The RTC (real-time clock) and CMOS data backup by the lithium battery. The Lithium batter y specific ation is shown in ta ble Specificatio n BR-2/[...]

  • Seite 16

    2. System Refere nc e SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 9 Table 2.2. Functional Specifications[SP I- 8451-LVA] < 1 / 2 > Type Specifications CPU(Option) Intel(R) Pentium(R) 4 Pr ocessor 1.7G - 2.8GHz (FSB400/533MHz) Intel(R) Celeron(R) Processor 1.7G - 2.6GH z (FSB 400 MHz) (Only corresponding to the N orthwood core) Intel(R) Celer[...]

  • Seite 17

    2. System Refere nc e 10 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Table 2.2. Functional Specifications [SPI-8451-LVA] < 2 / 2 > Type Specif ications Power Management Power management setup via BI OS Modem Ring On/Wake One LAN Supports PC98/PC99 ACPI Power management Bus specif ication/Size (mm) PCI/ISA (PICMG) *1 / 338 (L) x 122 (H) x 28(W[...]

  • Seite 18

    2. System Refere nc e SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 11 Power Requirements Your system requires a clean, steady power source fo r reliable per formance of the high frequency CPU on the product, the quality of the power supply is even more important. Power Consumption For typical configurations, the CPU board is designed to operate wit[...]

  • Seite 19

    2. System Refere nc e 12 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Connector & Jumper Location DIMM1 DIMM2 CN1 PW1 CN2 CN3 CN5 CN13 CN4 JP1 JI R1 JP2 JP 3 JC DIN 1 CN14 CN2 1 BATT1 JBAT1 CN8 CN6: CO M1 CN7: CO M2 CN9 CN24 CN15 CN16 CN17 CN22 CN23 JKB3 JKB1 JKB4 JKB2 FA N 2 CN18 CN19 CN20 FA N 1 CN10 CN1 1 CN 12 Figure 2.1. Connector & Jum[...]

  • Seite 20

    2. System Refere nc e SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 13 Block Diagram LPC BUS AC'97 LINK Processor PWM SOCK ET 478 P4/Celeron D PROCES SOR CLOCK ICS950201 ADDR GMCH BROOKDALE-GV FCBGA760 DVI Conn ector (SPI-84 51-LL V A, SPI-845 2-LL V A only) TMDS SiI164 DDRS D RAM HUB LINK PICMG GOL D FING ER LAN 10/100M Conne ctor LAN DATA PCI[...]

  • Seite 21

    2. System Refere nc e 14 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA[...]

  • Seite 22

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 15 3. Hardwar e Installations This chapter provides inform ation on how to use the jumpers and connectors on this product in or der to set up a workable system. Installation procedure (1) Confirm the power supply is off. (2) Install the process or w ith correct orientation. (3)[...]

  • Seite 23

    3. Hardware Installation s 16 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA CPU Installation: This product supports a single Intel 478pin FC-PGA2 type Pentium 4, Celeron D or Celeron processor. The processor’s VID pins automatically progr am the voltage regulator on the CPU board to the required processor voltage. The host bus speed is automatical [...]

  • Seite 24

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 17 Main Memory Installation: DIMM1, DIMM2 This product’s PICMG Industrial CPU Board supports one single-side or double-sided DDR200 (PC1600)/266(PC2100)/3 33(PC2700) unregister ed DIMM, 184-pin DIMM sockets for a maxim um memory of 2GB. Using the non-ECC DDR SDR AM DIMM. The [...]

  • Seite 25

    3. Hardware Installation s 18 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA ATX Power Control Con n ector: CN1 When used with an ATX-compliant power supply that supports remote power on/off, the CPU board can turn off the system power through soft war e control. To enable soft-off control in so ftware, advanced power manageme nt must be enabled in th[...]

  • Seite 26

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 19 Front Panel Connector: CN2 This header can be connect ed to a front panel power switch. Th e front panel connector includes headers for these I/O connections: Power switch This header can be connected the pow er on switch when ATX power supply use. Power LED This header can [...]

  • Seite 27

    3. Hardware Installation s 20 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Floppy Disk Connector: CN3 The floppy interface can be configured for the following floppy drive capacities and sizes: - 360 KB, 5.25-inch - 1.2 MB, 5.25-inch - 720 KB, 3.5-inch - 1.44 MB, 3.5-inch - 2.88 MB, 3.5-inch This connector supports the provided floppy dr ive ribbon [...]

  • Seite 28

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 21 Primary / Secondary ID E Connector: CN13/CN4 This product provides two bus-mastering PCI IDE inte rface. This interface support PIO Mode 3, PIO Mode 4, ATAPI devices (e.g., CD- ROM), and U ltra DMA/33/66/100 synchronous- D MA mode transfers. The BIOS supports logical block a[...]

  • Seite 29

    3. Hardware Installation s 22 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Parallel Port Connector: CN5 The parallel port bracket can used to add an add itional parallel port for additional parallel devices. There are four options for parallel por t operation: - Compatible (Standard mode) - Bi-Directional (PS/2 compatible) - Bi-Directional EPP. A dr[...]

  • Seite 30

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 23 Serial Port conn ector: CN6, CN7 Serial1 (CN6) and Serial2 (CN7) are 10-pins box-header s. Both are on board serial ports of the product. The following table shows the pin assignments of these connectors. RS- 232C/422/485 assigned for Serial2 (CN7) connector only. Table 3.8.[...]

  • Seite 31

    3. Hardware Installation s 24 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA RS-422 / RS-485 specifications - Transmission system : Asynchronous, half-/full- du plex serial transmission conform ing to RS-422/RS-485 - Baud rate: 50 - 115,200bps (progr am mable) - Signal extensible distance: 1.2km Max. RTS# JP3: 7-8 TXD D JP3: 5-6 JP3: 4-6 R RXD 47 k Ω[...]

  • Seite 32

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 25 IDE RAID Connector: CN14, CN8 (SPI-8451-LLVA only) The CPU board SPI-8451-LLVA using the chipset of Prom ise PDC20265R for IDE RAID port that with the bus-mastering design takes full advantage of mu lti-tasking, multi-threadi ng operating systems and greatly improves perform[...]

  • Seite 33

    3. Hardware Installation s 26 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Audio Connector: CN9 This connector connects the Audio jack cable. Table 3.11. Audio Connector Pin No. 2 4 6 8 10 Function LINE-OUT -L N.C. MIC-IN GND LINE-IN-L Pin No. 1 3 5 7 9 Function LINE-O UT -R GND N.C. GND LINE-IN-R CN9 9 10 1 2 CD-IN Connector: JCDIN This connector i[...]

  • Seite 34

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 27 DVI-I Connector: CN15 (SPI-8451-LLVA, SPI-8452-LLVA only) This connector is DVI-I connector for CRT/L CD. The pin assignment is shown below. In use the CRT (Analog RGB display), need the DVI-I-Analog RGB conversion adapter. 20 pin and 21 pin are connecting to Serial1 for the[...]

  • Seite 35

    3. Hardware Installation s 28 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA VGA Connector: CN24 (SPI-8451-LVA only) It is a VGA CRT connector. The pin assignments are as follows: Table 3.14. VGA Connector (CN24) PIN No. Function PIN No. Function 1 Red 2 Green 3 Blue 4 N.C 5 GND 6 GND 7 GND 8 GND 9 VCC 10 GND 11 N.C 12 DDC data 13 H-Sync 14 V-Sync 1 6[...]

  • Seite 36

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 29 LVDS LCD panel Connector: CN11 / CN12 (SPI-8451-LLVA, SPI-8452-LLVA only) CN11 and CN12 consist of 20-pin connectors th at using the Hirose’s DF13A-20DP-1.25V. This product supports LVDS LCD panel display . LVDS 18bit output, VGA (640 × 480), SVGA (800 x 600) , XGA (1024 [...]

  • Seite 37

    3. Hardware Installation s 30 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA LCD Backlight Connector: CN10 (SPI-8451-LLVA, SPI-8452-LLVA only) This is a 5-pin connector for backlight connector. Table 3.16. LCD Backlight Connector Pin No. 1 2 3 4 5 Function Back light GND N.C. GND VCC CN10 12345 Backlight : +1 2V Backlight power out (1A Max.) VCC : +5V[...]

  • Seite 38

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 31 GIGA LAN Connector: CN16 (SPI-8451-LLVA, SPI-8452-LLVA only) This connector is for the 10/100/1000 Base-TX LAN I/F that has LED indicated the Tr ansfer rate / Link / Act status of Ethernet capability of the CPU board. The follow table shows the pin assign ments of this conne[...]

  • Seite 39

    3. Hardware Installation s 32 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA USB Connector: CN18, CN19, CN20 This product have three USB (v2.0 compliant) pin- header connector (USB0/1: CN18, USB2/3: CN19, USB4/5: CN20). Table 3.19. USB Pin-header Connector (CN18, CN19, CN20) Pin No. 2 4 6 8 10 Function VCC1 USBP1- USBP1+ USBG GND Pin No. 1 3 5 7 9 Fun[...]

  • Seite 40

    3. Hardware Installation s SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 33 Keyboard / Mouse Connector: CN22 The CPU board provides a standard PS/2 keyboard/mou se connector for attaching a PS/2 key board/mouse. You will connect with an add-on cable for a PS/2 ke yboard/mouse. You can select that plug a PS/2 mouse directly, PS/2 keyboar d directly o[...]

  • Seite 41

    3. Hardware Installation s 34 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA +12V Power supply Con nector: PW1 The power supply that conformed for AT X12V is used, this connector connect 4Pin +12V cable directly from power supply. Use the +12V power cable of the accessories, when o the r power supplies are used. Table 3.24. +12V power supply Connector[...]

  • Seite 42

    4. Jumper Setting SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 35 4. Jumper Setting RS-232/422/485 Selector: JP 1, JP3 Table 4.1. RS-232C/422/485 Selector (JP1, JP3) RS-232 C RS-42 2 RS-48 5 1. For RS-485, TX+ (pin 2 ) and RX + (pin 3) m ust jumpe r toge ther in side the D type c onnecto r . 2. TX- (pin 1) and RX- (pin 4) is the same. JP1 JP3 JP1 J[...]

  • Seite 43

    4. Jumper Setting 36 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA RS-422 Setting RTS# JP3: 7-8 TXD# TX- RTS- TX+ RTS+ RX+ CTS+ RX- CTS- JP3: 7-8 JP2: 5-6 JP2: 3-4 JP2: 1-2 D R D R RXD# RTS CTS SER IA L2 1 2 3 4 5 6 7 8 9 JP3: 5-6 JP3: 4-6 120 Ω 120 Ω 120 Ω 120 Ω Figure 4.1. RS-422 Setting[...]

  • Seite 44

    4. Jumper Setting SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 37 RS-485 Setting RTS # JP8: 7-8 TXD# JP7: 7-8 JP7: 5-6 D R RXD# SERIAL 2 1 2 3 4 5 6 7 8 9 JP8: 5-6 JP8: 4-6 120 Ω 120 Ω DA T A- DA T A+ Figure 4.2. RS-485 Setting I/O addresses and instructions The table below lists I/O addresses for use as SERIAL2. Table 4.2. I/O A ddresses and ins[...]

  • Seite 45

    4. Jumper Setting 38 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA RS-422/485 Terminator: JP 2 Table 4.3. RS-422/485 Terminator (JP2) JP2 Termi nato r --- CTS for RS-4 22 RTS for RS-4 22 RXD for RS-4 22/485 TXD for RS -422/485 Funct ion T e rminatin g resisiter provided T e rminatin g resisiter provided T e rminatin g resisiter provided T e rminatin [...]

  • Seite 46

    5. Board Resources SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 39 5. Board Resour ces System address map The GMCH memory map includes a number of progr ammable ranges. All of these ranges must be unique and non-overlapping. There are no hardware interlocks to prevent problems in the case of overlapping ranges. Accesses to overlapped ranges may pro[...]

  • Seite 47

    5. Board Resources 40 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA PCI Routing Information Tabled 5.3. PCI Routing Information IDSEL INT Onboard Func tion AD23 INT F LAN Intel 82541 AD25 INT G RAID: PDC20265R[...]

  • Seite 48

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 41 6. RAID Contr ol ler Important data protection inform ation You should back up all data before installing any dr ive controller or storage peripheral. We are not responsible for any loss of data resulting from th e use, disuse or misuse of the RAID device. CAUTION When you need to u[...]

  • Seite 49

    6. RAID Controller 42 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA 3. Install the hard drives into th e hard drive bays of your system, including the power cables. 4. Attach one Ultra ATA cable to each h ard drive. Then a ttach one cab le to each of the IDE co nnector on the SPI-8451-LLVA board. The colored edge of th e cable(s) indicates pin 1, and[...]

  • Seite 50

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 43 Creating Your Disk Array You will now use the FastBuild™ BIOS utility to create your a rray using the attached drives. There are three different scenarios in creating this array. Y ou ca n create an array for perfor mance, you can create a Security array using new hard drives (rec[...]

  • Seite 51

    6. RAID Controller 44 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Creating an Array for Performance CAUTION RAID controller allows users to create str i ped arr ays with 1, 2 drives. To create an array f or best pe rformance, follow these steps: 1. Using the Spacebar, choose “Performance” under the Optimize Array for section. 2. Select how you [...]

  • Seite 52

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 45 Creating a Security Array with An Existing Data Drive CAUTION RAID controller permit only two drives to be us ed for a single Mirrored array in Auto Setup. You would use this method if you wish to use a drive that already contains data and / or is the bootable system drive in your s[...]

  • Seite 53

    6. RAID Controller 46 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Using FastBuild™ Configuration Utility The FastBuild™ Configuration Utility offers several menu choice to create an manage the driv e array on the RAID controller. For purposes of this manual, it is assumed you have already created a n array in the previous chapter and now wish t[...]

  • Seite 54

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 47 Using the Main Menu This is the first option screen wh en entering the FastBuild™ Setup. FastBuild (tm) Utility 1.xx (c) 1996-2001 Pr omise Technology, Inc. [ Main Menu ] Auto Setup…………………………………………… ….. [ 1 ] View Drive Assignments …………?[...]

  • Seite 55

    6. RAID Controller 48 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Creating Arrays Automatically The auto Setup <1> selection from the Main Menu can intuitively help cre ate your disk array. It will assign all available drives appropria te for the disk array you are creat ing. After making all selections, use Ctrl-Y to save selections. FastBui[...]

  • Seite 56

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 49 Viewing Drive Assignments The View Drive Assignments <2> option in the Main Menu displays whether drives are assig ned to a disk arrays or are unassigned. Under the “Assignment” column, drives are labeled with their assigned disk array or shown as “Free” if unassigned.[...]

  • Seite 57

    6. RAID Controller 50 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Deleting an array The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not the same as deleting data from the drives themselves. If you delete an array by accident (and befo re it has been used again), the array can norma lly be recovered by d[...]

  • Seite 58

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 51 Rebuilding a mirrored Array Rebuild Array <5> Menu option is necessary to recover fro m an error in a mirrored disk array. You will receive an error message when booting y our system from the FastTrak BIOS. CAUTI ON Drives MUST be replaced if th ey contain any physical errors.[...]

  • Seite 59

    6. RAID Controller 52 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA 12. Press [Enter] and confirm that the data will be copied on to the selected drive. All data on the replacement drive will be written over with mi rrored information from the array drive. A progress bar will appear as below. Please Wait While Duplicating The Image 10% Complete 13. O[...]

  • Seite 60

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 53 Installing the driver s Windows 2000/XP Installing Driver During New windows 2000/XP Installation CAUTION Before the Windows 2000/XP installing, please copy the whole files and folder in the folder as follows “RAIDWin2000” (“RAIDW inxp”) of the Driver CD-ROM to a floppy [...]

  • Seite 61

    6. RAID Controller 54 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Installing Driver in Existing windows 2000/XP System WA R N I N G If you will be moving the boot drive containing the existing Windows 2000/XP operating system to a mirrored RAID 1 array on the contr oller, the contro ller driver MUST be load ed to the hard drive while it is still at[...]

  • Seite 62

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 55 Using the FastCheck Monitoring Utility You can monitor the operating status of all arrays and drives configur ed on the RAID controller using the supplied FastCheck monitoring utility for Windows-based operating sy stem (Windows 2000 / XP). FastCheck generates visual and audible mes[...]

  • Seite 63

    6. RAID Controller 56 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Closing FastCheck Once FastCheck is opened (either automatically on st artup or manually), the monitoring utility remains running in the background even if go user “closes” the FastCheck windows. To co mpletely shut down FastCheck icon on the Taskbar. 1. Right-click the FastCheck[...]

  • Seite 64

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 57 Using FastCheck Array Windows Once FastCheck is selected, the Fa stCheck Monitoring Utility window wil l appear. The main pane has three information window tabs: Array, Controller, and Options. The user can switch screens by clicking on the tab. The Array window is the active screen[...]

  • Seite 65

    6. RAID Controller 58 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Viewing Arrayed Drive Information By left-clicking on a drive member of an ar ray in the left pane, the right pane shows the following information categories for that drive: Status: (also shown under the Array Window) can be Func tional, Critical, or Offline. The meanings are shown b[...]

  • Seite 66

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 59 Using Array Pull-down Menu At the bottom of the Array window, it indicates to right-click on an Arra y to perform synchronization or rebuild operations. Right-clicking displays the following pull-down menu: From this menu, users may choose to have the window Always Appear on Top of [...]

  • Seite 67

    6. RAID Controller 60 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA To synchronize, choose the Array Tab View. Right-click on the array you wish to synchronize a nd choose “Synchronize ” from the context menu. Click “Yes” to initiate Synchronization (see below) when the Confirmation wi ndow appears. To cancel this option, click the NO button.[...]

  • Seite 68

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 61 Rebuilding An Array This command effectively copies or overwrites data fr om an existing data drive in the array on to a blank drive. The operat ion will be typically used when a failed drive has been r epl aced with a new drive as part of a mirrored array. To perform a Rebuild, cho[...]

  • Seite 69

    6. RAID Controller 62 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Click the Next button to proceed to Rebuild Wizard Step 2 or Cancel button to stop. Rebuild Wizard Step 2 confirm s the Target or “Rebuild” disk by Array # and drive ID. Click Finish button to initiate physica l Rebuild, Back button to review Step 2, or Cancel button to Stop. A f[...]

  • Seite 70

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 63 Using Controller Windows Clicking on the Controller tab, will reveal the Cont roller Window. This displays physical information about the location of FastTrak100-Lite, data ch annels on the card, and the attached drives. V iewing Contr oller Card Information By left-clicking on the [...]

  • Seite 71

    6. RAID Controller 64 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA V iewing I DE Channel Information Left-clicking on a given Channel icon or # in the le ft pane, will show the Base IO addresses of the channel in the right pane (used for troubleshooting). V iewing Dr ive Inform ation Left-clicking on a given Drive icon or ID in the left pa ne, will [...]

  • Seite 72

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 65 S.M.A.R.T. Status: Indicates wheth er attached hard driv e implements Self-Monitoring Analysis & Reporting Technology to predict drive failure Size: Indicates capacity of individual drive Location: Shows physical location of drive. Indicates on which IDE channel (1 or 2), and wh[...]

  • Seite 73

    6. RAID Controller 66 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Selecting Notification Options This section of the Options windows allows users to se lect how they are notified of a system event. A System Event includes driver-initiated Rebuilds (autom atic rebuild using a “hot ” spare standby drive), user-initiated manual Rebuilds or manual [...]

  • Seite 74

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 67 Scheduling Array Synchronization This section of the Options Window allows a user to schedule when and how often FastTrak100-Lite will perform synchronization m aintenance of a mirrored array . Disable checkbox is checked (the default) to turn off automated scheduling of synchr oniz[...]

  • Seite 75

    6. RAID Controller 68 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Schedule event drop down box allows scheduling synchroniza tion by minute, by hour, by day , by week, or by month. If enabled, the default is By M onth. This allows synchronization to take place during an off-hour when the system is either not in use or not at peak demand. Start time[...]

  • Seite 76

    6. RAID Controller SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 69 Setting Disk Parameters Option Enable Write Cache checkbox allows user to enab le/disable write cache for hard drives that include this performance feature. FastCheck automatically rec ognizes such drives and enables the feature as the default setting. F or drives that do not use wr[...]

  • Seite 77

    6. RAID Controller 70 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Creating Password To create a password, check the Enable Password checkbox in the Preferences section. The “Set Password” window will appear. Type the password you want to use. Press the Tab key or click to retype the same passwor d in the “Confirm New Password” section. Clic[...]

  • Seite 78

    7. Watch-Dog-T imer (WDT) Setting SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 71 7. W atch-Dog-Timer (WDT) Setting The watchdog timer serves as a safeguard against possi ble system lock-up in your industrial computer system. In most industrial environments, there ar e heavy equipm ent, generators, high-voltage power lines, or power drops that have[...]

  • Seite 79

    7. Watch-Dog-T imer (WDT) Setting 72 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA (2) Example program ming The following example is written in Intel8086 assem bly language. ;=============== ;<WDT Initial> ;=============== ;------------- ------------ ---------- ;Enter the extended function mode ;------------- ------------ ---------- MOV DX,2EH [...]

  • Seite 80

    7. Watch-Dog-T imer (WDT) Setting SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 73 ;------------- ------------ ------------- ---- ;Exit the extended function mode ;------------- ------------ ------------- ---- MOV DX,2EH MOV AL,AAH OUT DX,AL ;==================== ============ ;<WDT START : counter set and a start > ;==================== ======[...]

  • Seite 81

    7. Watch-Dog-T imer (WDT) Setting 74 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA ;============== ;<WDT STOP> ;============== ;------------- ------------ ---------- ;Enter the extended function mode ;------------- ------------ ---------- MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL ;------------- ------------ ---------- ;Select logical device WDT[...]

  • Seite 82

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 75 8. BIOS Setup Introduction This chapter discusses Award’s Setup progra m bu ilt into the FLASH ROM BIOS. The Setup program allows users to modify the basic system configurati on. This special informa tion is then stored in battery-backed RAM so that it re tains the Setup information wh[...]

  • Seite 83

    8. BIOS Setup 76 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Using Setup In general, you use the arrow keys to highlight items, press <Enter> to select, use the PageUp and PageDown keys to change entries, press <F1> for help and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup progr [...]

  • Seite 84

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 77 Main Menu Once you enter the Award BIOS CMOS Setup Utilit y, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-men[...]

  • Seite 85

    8. BIOS Setup 78 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Load Fail-Safe Defa ults Use this menu to load the BIOS default values for the minimal/stable performance for your system to operate. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal perform ance system operations. While Award has[...]

  • Seite 86

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 79 Standard CMOS Setup Figure 8.2. Standard CMOS Setup The items in Standard CMOS Setup Menu are divide d into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select th[...]

  • Seite 87

    8. BIOS Setup 80 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Item Options Description Halt On All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/Key Select the situation in which you want the BIOS to stop the POST process and notify you Base Memory N/A Displays the amount of conventional memory detected during boot up Extended M[...]

  • Seite 88

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 81 Advanced BIOS Features Setup This section allows you to configure your system fo r basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and secur ity. Figure 8.3. Advanced BIOS Features Setup Virus Warning When [...]

  • Seite 89

    8. BIOS Setup 82 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice CPU L1 & L2 Cac he CPU L1/L2 Cache Enabl ed/Disabled select. Usually, select Enabled. Quick Power On Self Test Select Enabled to reduce the amount of time required to run the power-on self-test (POST). A quick POST skips certain steps. First/Second/Third/Other Boot [...]

  • Seite 90

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 83 Description Choice Boot Up Floppy Seek When Enabled, the BIOS tests (seeks) floppy drives to determine whether they have 40 or 80 tracks. Only 360-KB floppy drives have 40 tracks; d rives with 720 KB, 1.2 MB, and 1. 44 MB capacity all ha ve 80 tracks. Because very few modern PCs have 4 0[...]

  • Seite 91

    8. BIOS Setup 84 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice Typematic Delay ( Msec) When the typematic rate setting is enabled, you can select a typematic delay (the del ay before key strokes begin to repeat) of 25 0, 500, 750 or 10 00 milliseconds . Security Option Select whether the password is required every time the system b[...]

  • Seite 92

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 85 Advanced Chipset Features Setup Figure 8.4. Advanced Chipset Features Set up This section allows you to configure the system base d on the specific features of the installed chipset. This chipset manages bus speeds and access to syst em memory resources, such as DRAM an d the external ca[...]

  • Seite 93

    8. BIOS Setup 86 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice Active to Precharge delay Select the precharge delay timer. DRAM RAS# to CAS# delay This field lets you insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read from, or refreshed. Fast gives fast er performance; and Slow gives mo[...]

  • Seite 94

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 87 Description Choice Video BIOS Cacheable Selecting Enabled allows caching of the video BIOS ROM at C0000h to CB FFFh, resulting in b etter video performance. Howeve r, if any program writes to this memory area, a system error may result. Memory Hole At 15M -16M You can reserve this area o[...]

  • Seite 95

    8. BIOS Setup 88 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice On-Chip VGA When Enabled to choice th e on-board VGA function, otherwise disabled the on-board VGA function. On chip Frame buffer s ize When Enabled, a fixed VGA frame b uffer from A000h to BFFFh and a CPU- to-PCI write buff er are implemented. Boot Display Select the b[...]

  • Seite 96

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 89 Integrated Peripherals Figure 8.5. Integrated Peripherals Description Choice On-Chip Primary PCI IDE The integrated peripheral controller contains an IDE interface with support for two IDE channels. Sel ect Enabled to activate each channel separately. IDE Primary Master /Slave PIO The fo[...]

  • Seite 97

    8. BIOS Setup 90 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice IDE Primary Mas ter/Slave UDMA UDMA (Ultra DMA ) is a DM A data transfer protocol that utilizes ATA commands and the ATA bus to allow DMA commands to tran sfer data at a max imum burst rate of 33 MB/s. When you select Auto in the four IDE UDMA fields (for each of up to [...]

  • Seite 98

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 91 Description Choice USB 2.0 controller Select Enabled if your syst em contains a Universal Serial Bus (US B 2.0) co ntroller and yo u have USB peripherals. USB Init Delay (SPI- 8452-LLVA only) It is a setting that delays the initialization of USB. Disable(Default) 3 sec 5 sec 8 sec 10 sec[...]

  • Seite 99

    8. BIOS Setup 92 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice Init Display Fir st Initialize the o n board vid eo display be fore initia lizing any other display device on the system. Thus the on board display become s the primary disp lay. (Only SPI-8451-LLV A and SPI-8452-L LVA are effective.) Onboard LAN Select Enabled to activ[...]

  • Seite 100

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 93 Description Choice Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) insta lled on the syst em board an d you wish to use it. If you instal l and-in FDC o r the system has no floppy drive, sel ect Disabled in this field. Onboard Serial Port 1 Select [...]

  • Seite 101

    8. BIOS Setup 94 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice ECP Mode Use DMA Select a DMA channel for the port[...]

  • Seite 102

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 95 Power Management Setup The Power Management Setup allows you to configure you system to most effectively save energy while operating in a manner consistent with your own style of computer use. Figure 8.6. Power Management Setup Description Choice Power-Supply Type Select the power supply[...]

  • Seite 103

    8. BIOS Setup 96 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice Power management Video Off Method This determines the manner in whic h the monitor is blanked. V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. DPMS Initial display p [...]

  • Seite 104

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 97 Description Choice Suspend Mode HDD Power Down When enabled and after the set time of system inactivit y, the hard disk drive wi ll be powered down while all other devices re main active. Soft-Off by PWR-BTTN When “Instant-off”, immediate system is turn off if a power button is pushe[...]

  • Seite 105

    8. BIOS Setup 98 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Description Choice Power after PWR Fail Select a Power On status by the BIOS setup when power fails. When use ATX power supply and the setup jumper on the back plane is “AT mode”, select this setting is “on”. CPU THRM-Throttling To select throttling ration for CPU speed dow n acti[...]

  • Seite 106

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 99 Description Choice Resume by Alarm When Enabled, your can set the d ate and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. Reload Global Timer Events: When Enabled, an event occu rring on each listed device restarts the global timer for Standby mode.[...]

  • Seite 107

    8. BIOS Setup 100 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA PnP/PCI Config uration Setup This section describes configuring the PCI bus syst em. PCI, or Per sonal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed th e CPU itself uses when communicating with its own special components. This section [...]

  • Seite 108

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 101 Description Choices Resource Controlled by The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play – compatib le devices. If you select Auto, all the interrupt request (IRQ) a nd DMA assignment fields disa ppear, as the BIOS automati cally assigns them[...]

  • Seite 109

    8. BIOS Setup 102 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA IRQ n Resources Figure 8.8. IRQ n Resources When resources are controlled manually, assign each sy stem interrupt as on of the following type, depending on the type of device using the interrupt. Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific[...]

  • Seite 110

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 103 PC Health Status Figure 8.9. PC Health Status The BIOS shows the PC health status in this window. Item Description Current System Temp. This field displays the current system temperature, if your computer contains a monitoring system. Current CPU1 Temp. This field displays the current C[...]

  • Seite 111

    8. BIOS Setup 104 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Frequency / Voltage Control Figure 8.10. Frequency/Voltage Control Description Choices Spread Spectrum When the system clock generator pulses, the extreme values of the pulse generate excess EMI. Enabl ing pulse spectrum spread modulation changes the ex treme values from spikes to flat c[...]

  • Seite 112

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 105 Defaults Menu Selecting “Defaults” from the main menu show s you two options which are described below Load Fail-Safe Defaults When you press <Enter> on this item you get a c onfirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N) ? N Pressing ‘Y’ l[...]

  • Seite 113

    8. BIOS Setup 106 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Exit Selecting Load Fail-Safe Defaults Save & Exit Setup Pressing <Enter> on this item asks for confirm ation: Save to CMOS and EXIT (Y/N)? Y Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after you turn your syste[...]

  • Seite 114

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 107 DISK BOOT failure INSERT SYSTEM DISK AND PRESS ENTER No boot device was found. This could mean that either a boot drive was not detected or the drive does not contain proper system boot files. Insert a system disk into Drive A: and press <Enter >. If you assumed the system would b[...]

  • Seite 115

    8. BIOS Setup 108 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Invalid EISA configuration PLEASE RUN EISA CONFIGURATION UTILI TY The non-volatile memory containing EI SA configuration inform ation wa s programmed incorrectly or has become corrupt. Re-run EISA configuration utility to correctly progra m the memory. NOTE: When this error appears, the [...]

  • Seite 116

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 109 RAM parity error CHECKING FOR SEGMENT ... Indicates a parity error in Random Access Me mory. Should be empty but EISA board found PLEASE RUN EISA CONFIGURATION UTILI TY A valid board ID was found in a slot that was configured as having no boar d ID. NOTE; When this error appears, the sy[...]

  • Seite 117

    8. BIOS Setup 110 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA Hard disk(s) fail ( 20) HDD initialization error. Hard disk(s) fail ( 10) Unable to recalibrate fixed disk. Hark disk(s) fail ( 08) Sector Veri fy failed. Keyboard is locked out – Unlock the key Unlock the key. BIOS detect th e keyboard is locked. P17 of ke yboard controller is pulled [...]

  • Seite 118

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 111 POST Codes POST (hex) Description CFh Test CMOS R/W functionality. C0h Early chipset initializ ation: -Disable shad ow RAM -Disable L2 c ache (socket 7 or belo w) -Program basic chipset regi sters C1h Detect memory -Auto-detection of DRAM size, type and ECC. -Auto-detection of L2 cache [...]

  • Seite 119

    8. BIOS Setup 112 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA POST (hex) Description 20h Reserved 21h HPM initialization (notebook platform) 22h Reserved 23h 1. C heck validity o f RTC value: e. g. a value of 5Ah is an inva lid value f or RTC minute. 2. Load CMOS settings into BIOS stack. If CMOS checksum fails, use default value instead. 3. Prepar[...]

  • Seite 120

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 113 POST (hex) Description 45h Reserved 46h Reserved 47h In itialize EISA slot 48h Reserved 49h 1. Calcu late total memory by tes ting the last double word of each 64K page. 2. Program writes allocation for AMD K5 CPU. 4Ah Reserved 4Bh Reserved 4Ch Reserved 4Dh Reserved 4Eh 1. Program MTRR [...]

  • Seite 121

    8. BIOS Setup 114 SPI-8451-LLVA, SPI-8452-L LVA, SPI-8451-LVA POST (hex) Description 6Dh 1. Assign resources to all ISA PnP devi ces. 2. Auto assign ports to onboard COM ports i f the corresponding it em in Setup is set to “AUTO”. 6Eh Reserved 6Fh 1. Initialize floppy control ler 2. Set up floppy related fiel ds in 40:hardware. 70h Reserved 71h[...]

  • Seite 122

    8. BIOS Setup SPI-8451-LLVA, SPI- 8452-LLVA, SPI-8451-L VA 115 POST (hex) Description 94h 1. Enable L2 cache 2. Program boot up speed 3. Chipset f inal initializ ation. 4. Power manageme nt final init ialization 5. Clear screen & display summary table 6. Program K6 write allocation 7. Program P6 class write combining 95h 1. Program d aylight sa[...]

  • Seite 123

    SPI-8451-LLVA SPI-8451-LVA SPI-8452-LLVA User’s Manual CONTEC CO.,LTD. July 2009 Edition 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025 , Japan Japanese http:/ /www.contec .co.jp/ English http:/ /www.contec .com/ Chinese http:/ /www.contec .com.cn/ No part of this document may be copied or reprodu ced in any form by any means wit hout prior w[...]