D-Link DCS-7110 Bedienungsanleitung

USER MANUAL DCS-7110 VERSION 2.10[...]

2 D-Link DCS-7110 User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in[...]

3 D-Link DCS-7110 User Manual Table of Contents Product Overview ........................................................ 5 Package Contents ................................................... 5 System Requirements ............................................. 6 Introduction .............................................................. 7 Features [...]

4 D-Link DCS-7110 User Manual Time and Date .............................................. 71 Maintenance ................................................. 72 Parameter List ............................................... 74 Logs .............................................................. 75 Appendix A - Technical Specications ...............[...]

5 D-Link DCS-7110 User Manual Product Overview Product Overview If any of the above items are missing, please contact your reseller. DCS-7110 HD IR Outdoor Camera Mounting Bracket Power Adapter Screw CAT5 Ethernet Cable User Manual and Software on CD-ROM Quick Install Guide HD I R O UT DOO R DCS-7110 Ver . 1 .0 0(W W) © 2 0 1 0 D - L i n k C o r p[...]

6 D-Link DCS-7110 User Manual Product Overview System Requirements  Operating System: Microsoft Windows ® , 2000, XP, Vista, 7  Memory : At least 256MB of memory (512MB recommended)  Web Browser: Internet Explorer 6.x or higher  VGA card resolution: SVGA or XGA (1024x768 or above)  CPU: 1.7GHz or above (2.8GHz plus processor with 51[...]

7 D-Link DCS-7110 User Manual Product Overview Introduction D-Link DCS-7110 is an all-in-one, outdoor network camera equipped with industry-leading high denition (HD) megapixel resolution and H.264 compression. The DCS-7110 connects to a network to provide high-quality live video over the Internet. This camera is capable of capturing video in bo[...]

8 D-Link DCS-7110 User Manual Product Overview Features Flexible Connectivity The DCS-7110 includes input and output ports for connectivity to external devices such as IR sensors, switches, and alarm relays. It also comes with an RS-485 interface, providing connectivity to an optional pan/tilt scanner. The DCS-7110 also incorporates Power over Ethe[...]

9 D-Link DCS-7110 User Manual Product Overview Hardware Overview Front Panel Infrared LEDs IR LEDs Illuminate the camera's eld of view IR-Cut Removable (ICR) Sensor IR-Cut Removable sensor judges lighting conditions and switches from day mode to night mode accordingly Sunshield Adjustable sunshield protects the camera sensor from direct sun[...]

10 D-Link DCS-7110 User Manual Product Overview Cable Connectors DI/DO Connectors DI/DO connectors provide a physical interface to send and receive digital signals to and from a variety of external devices Reset Button Press and hold this button for 10 seconds to reset the camera to factory default settings DC Power Connects to the 12 V DC power ad[...]

11 D-Link DCS-7110 User Manual Installation Installation Hardware Installation Mounting the Camera S t e p 1 : U si n g th e t w o s c r ew s p r ov i d e d a t t a ch c a m er a s ho e t o t h e u nd e r s id e o f t h e ca m e r a . S t e p 2 : U si n g th e b o lt p r ov i d e d a t t a c h c a m er a s h oe t o t h e m ou n t i n g b r a ck e t[...]

12 D-Link DCS-7110 User Manual Installation Deploying the Camera S t e p 1 : L oc a t e a n a r ea o n t h e w al l w h ic h i s c a p a bl e o f s u p p o rt i n g th e w ei g h t of t h e c a m e ra . S t e p 2 : U se a dr i l l bi t t o m a k e h o l e s . I n s er t w a ll a n ch o r s an d a f x t h e m o u n ti n g br a c k e t u s i n g t[...]

13 D-Link DCS-7110 User Manual Installation Basic Connection (without PoE) 1. Connect the camera to your switch or router via Ethernet cable. 2. Connect the power cable from the camera to the supplied power adapter . 3. Connect the supplied power adapter to a power outlet. Connection Using a PoE Switch If using a PoE switch or router , connect the [...]

14 D-Link DCS-7110 User Manual Installation Note: T o prevent the camera's wire connectors from being damaged by water or other elements: 1. When connecting the camera, the unsheathed part of the wire connectors must either be sealed or enclosed in a junction box. 2. The unsheathed part of the wire connectors should be positioned at a downward[...]

15 D-Link DCS-7110 User Manual Installation Software Installation Insert the DCS-7110 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run . Type D:autorun.exe , where D: represents the drive letter of [...]

16 D-Link DCS-7110 User Manual Installation Click Yes to accept the License Agreement. To start the installation process, click Next . Note: The installation may take several minutes to nish.[...]

17 D-Link DCS-7110 User Manual Installation Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE[...]

18 D-Link DCS-7110 User Manual Installation Enter the Admin ID and password. When logging in for the rst time, the default Admin ID is admin with the password left blank. Click Next , to proceed to the next page. The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, [...]

19 D-Link DCS-7110 User Manual Installation Take a moment to conrm your settings and click Restart . Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started. Click Next , to proceed to the next page.[...]

20 D-Link DCS-7110 User Manual Installation Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled " Link " to access the web conguration. The Setup Wizard will automatically open your web browser to the IP address of th[...]

21 D-Link DCS-7110 User Manual Installation This section shows your camera’s live video. You can select your video prole and view or operate the camera. For additional information about web conguration, please refer to the user manual included on the CD-ROM or the D-Link website. Enter admin as the default username and leave the password bl[...]

22 D-Link DCS-7110 User Manual Installation D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to congure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance. Insert the CD-ROM into the CD-ROM [...]

23 D-Link DCS-7110 User Manual Installation Click Finish to complete the installation. To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console . For more detail operation of using D-ViewCam software, please refer to D-ViewCam Manual.[...]

24 D-Link DCS-7110 User Manual Conguration Conguration Live Video When you connect to the camera's web interface you will see the following page. This is the Live Video page which will allow you to view the camera's video feed and control basic camera functions using the icons on the screen. Please refer to the tables on the followi[...]

25 D-Link DCS-7110 User Manual Conguration D-Link Logo Securicam Logo Click this logo to visit the D-Link website. The logos and website can be customized to t your needs. For more information, please refer to User Customization on page 67. Client Settings Setup the stream transmission mode and saving options on the local computer. Language S[...]

26 D-Link DCS-7110 User Manual Conguration PTZ Control This camera supports both “digital“ (e-PTZ) and “mechanical“ pan/tilt/zoom control. Please refer to PTZ Control for detailed information. Mechanical PTZ: Connect the camera to a PTZ driver or scanner via RS-485 interface. Digital PTZ: Control the e-PTZ operation. It allows users to q[...]

27 D-Link DCS-7110 User Manual Conguration Snapshot Click this button to capture and save still images. The captured images will be displayed in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP (*.bmp) format. Recording Click this button to record video clips to your computer. When you exit the [...]

28 D-Link DCS-7110 User Manual Conguration Client Setup Clicking the Client Settings button will bring you to the following screen which allows you to congure the basic protocol options for you camera. H.264/MPEG4 Protocol Options For additional information about streaming options please see page 41. UDP Unicast: Stream to a single computer. [...]

29 D-Link DCS-7110 User Manual Conguration Click the setup button to enter the setup screen. Click on the basic button to enter the setup screen. Please click the [+] next to each folder to view the options. Basic setup includes the following options: System Overview Video - Video Settings Network - IP Settings Event Management - Motion Detectio[...]

30 D-Link DCS-7110 User Manual Conguration Advanced Setup Click the setup button to enter the setup screen. Click on the advanced button to enter the setup screen. Please click the [+] next to each folder to view the options. Advanced setup includes the following options: System Overview Video - Video Settings, Image Settings, Day and Night Sett[...]

31 D-Link DCS-7110 User Manual Conguration System Overview The system overview page contains a summary of the camera's current settings. For more information about adjusting these settings, please consult the subsequent instructions found in this manual.[...]

32 D-Link DCS-7110 User Manual Conguration Video Options Viewing Window: The camera supports multiple streams with frame size ranging from 176 x 144 to 1280 x 800. Click Viewing Window to open the viewing region setting page. On this page, you can set the Region of Interest (ROI) and the Output Frame Size for stream 1~3. Please follow the steps [...]

33 D-Link DCS-7110 User Manual Conguration Once nished with the setting in the Viewing Window, click Save to enable the settings and click Close to exit the window. The selected Output Frame Size will immediately be applied to the Frame size of video stream. You can then go back to the Live Video to test the new settings. Sensor Setting: Clic[...]

34 D-Link DCS-7110 User Manual Conguration Video Quality Setting for Stream 1~4 Compression Type: The compression level affects the amount of bandwidth and storage required. Lower compression uses more bandwidth and storage but delivers better image quality. Of the three options, H.264 consumes much less network bandwidth compared to MPEG4 and J[...]

35 D-Link DCS-7110 User Manual Conguration Image Settings This page allows you to tune the white balance, brightness, saturation, contrast, and sharpness settings for the video. Color: Select either a Color or B/W (black and white, monochrome) video display. Power Line Frequency: Select either 50 or 60 Hz depending on your region. Video Orientat[...]

36 D-Link DCS-7110 User Manual Conguration Brightness: Adjust the image brightness level, which ranges from -5 to +5 Saturation: Adjust the image saturation level, which ranges from -5 to +5 Contrast: Adjust the image contrast level, which ranges from -5 to +5 Sharpness: Adjust the image sharpness level, which ranges from -3 to +3 Overlay Title [...]

37 D-Link DCS-7110 User Manual Conguration Day and Night Settings Switch to B/W in Night Mode: Select to automatically enable the camera to switch to B/W night mode. IR Cut Filter: The IR-Cut Removable (ICR) lter mechanically switches between two different sensor lters. It provides the best light conditions both during the day and night. T[...]

38 D-Link DCS-7110 User Manual Conguration Network IPv4 LAN: Select this option when the camera is deployed on a local area network (LAN) and is intended to be accessed by local computers. The default setting for the Network Type is LAN. Remember to click Save when you complete the Network setting. • Get IP address automatically (DHCP): Select[...]

39 D-Link DCS-7110 User Manual Conguration Secondary WINS Server: The secondary WINS server that maintains the database of computer name and IP address. • Enable UPnP Presentation: Select this option to enable UPnP presentation for the camera so that whenever a camera is presented to the LAN, shortcuts of connected cameras will be listed in My[...]

40 D-Link DCS-7110 User Manual Conguration 4. Go to Setup > Network > IP settings . Select PPPoE and enter the user name and password provided by your ISP. Click Save to enable the setting. 5. The camera will reboot. 6. Disconnect the power to the camera. Remove it from the LAN environment. IPv6 Enable IPv6: Select this option and click Sa[...]

41 D-Link DCS-7110 User Manual Conguration Port and Access Name Settings HTTPS By default, the HTTPS port is set to 443. It can also be assigned to another port number between 1025 and 65535. FTP The FTP server allows the user to save recorded video clips. You can utilize D-Link's IP Cam Wizard to upgrade the rmware via FTP server. By de[...]

42 D-Link DCS-7110 User Manual Conguration Authentication: Depending on your network security requirements, the camera provides three types of security setting for streaming via RTSP Protocol: disable, basic, and digest. If basic authentication is selected, the password is sent in plain text format, but there can be potential risks of it being i[...]

43 D-Link DCS-7110 User Manual Conguration The ports can be changed to values between 1025 and 65535. The multicast RTP port must be an even number, and the multicast RTCP port number is the multicast RTP port number plus one, and thus is always odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly. Multicast [...]

44 D-Link DCS-7110 User Manual Conguration Dynamic DNS This section explains how to congure the dynamic domain name service for the camera. DDNS is a service that allows your camera, especially when assigned with a dynamic IP address, to have a xed host and domain name. Enable DDNS: Select this option to enable the DDNS setting. Server Nam[...]

45 D-Link DCS-7110 User Manual Conguration HTTPS This section explains how to enable authentication and encrypted communication over SSL (Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher security level. Enable HTTPS Select this item to enable HTTPS communication, then select a connection option: &quo[...]

46 D-Link DCS-7110 User Manual Conguration Create Certicate Request and Install Select this option to create a certicate from a certicate authority. 1. Click Create to open the Create Certicate page, then click Save to generate the certicate. 2. If you see the information bar, click OK and click on the Information bar at the top o[...]

47 D-Link DCS-7110 User Manual Conguration Access List This section explains how to control access permissions by verifying the connecting client PC’s IP address. General Settings Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10 clients (including stream 1 ~ stream 5). The default value is 10.[...]

48 D-Link DCS-7110 User Manual Conguration • Refresh: Click this button to refresh all current connections. • Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that the selected connections will only be disconnected temporarily and will automatically try to re-l[...]

49 D-Link DCS-7110 User Manual Conguration Advanced Settings SNMP conguration This section explains how to use the SNMP on the network camera. The Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices. It helps network administrators to remotely mana[...]

50 D-Link DCS-7110 User Manual Conguration IEEE 802.1x Enable this function if your network environment uses IEEE 802.1x which is a port-based network access control. The network devices, intermediary switch/access point/hub, and RADIUS server must support and enable 802.1x setting. The 802.1x standard is designed to enhance the security of loca[...]

51 D-Link DCS-7110 User Manual Conguration The following are the main benets of a QoS-aware network: The ability to prioritize trafc and guarantee a certain level of performance to the data ow. The ability to control the amount of bandwidth each application may use, and thus provide higher reliability and stability on the network. Requi[...]

52 D-Link DCS-7110 User Manual Conguration QoS/DSCP DSCP-ECN denes QoS at Layer 3 (Network Layer). The Differentiated Services (DiffServ) model is based on packet marking and router queuing disciplines. The marking is done by adding a eld to the IP header, called the DSCP (Differentiated Services Code Point). This is a 6-bit eld that pr[...]

53 D-Link DCS-7110 User Manual Conguration Motion can be detected by measuring change in speed or vector of an object or objects in the eld of view. Enable Motion Detection: Select this option to turn on the motion detection feature. Window Name: Create your own name for the monitored area/ window. It will show at the top of the motion window[...]

54 D-Link DCS-7110 User Manual Conguration Tamper Detection With tamper detection, the camera is capable of detecting incidents such as redirection, blocking or de-focusing, or even spray paint. To enable tamper detection, follow the steps given below: 1. Select Enable camera tampering detection . 2. Enter the tamper trigger duration (10 sec. ~ [...]

55 D-Link DCS-7110 User Manual Conguration DI and DO Network camera provides a general I/O terminal block with one digital input and digital output for device control. The I/O connector provides the physical interface for digital input (DI+. GND) and digital output (DO-, +12V) that is used for connecting a diversity of external alarm devices to [...]

56 D-Link DCS-7110 User Manual Conguration Event Settings This section explains how to congure the camera to respond to particular situations (event). A typical application is that when a motion is detected, the camera sends buffered images to an FTP server or e-mail address as notications. Sever Settings Click Add Server on Event Settings[...]

57 D-Link DCS-7110 User Manual Conguration FTP: Select to send the media les to an FTP server when a trigger is activated. • Server address: Enter the domain name or IP address of the FTP server. • Server port: By default, the FTP server port is set to 21. It can also be assigned to another port number between 1025 and 65535. • User nam[...]

58 D-Link DCS-7110 User Manual Conguration Media Settings Click Add Media to open the Media Settings page. On this page, you can specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be congured. Media name: Enter a name for the media setting. Media Type: There are three choices of media type[...]

59 D-Link DCS-7110 User Manual Conguration Pre-event recording: The camera has a buffer area. It temporarily holds data up to a certain limit. Enter a number to decide the duration of recording before a trigger is activated. Up to 9 seconds can be set. Maximum duration: Specify the maximum recording duration in seconds. Up to 20 seconds can be s[...]

60 D-Link DCS-7110 User Manual Conguration Trigger This is the cause or stimulus which denes when to trigger the camera. The trigger source can be congured to use the camera’s built-in motion detection mechanism or external digital input devices. There are several choices of trigger sources as shown below. Select the item to display the [...]

61 D-Link DCS-7110 User Manual Conguration Action Dene the actions to be performed by the camera when a trigger is activated. To set an event with recorded video or snapshots, it is necessary to congure the server and media setting so that the camera will know what action to take (i.e. the server to send the media les to) when a trigger[...]

62 D-Link DCS-7110 User Manual Conguration Click Add to open the recording setting page. In this page, you can dene the recording source, recording schedule, and recording capacity. A total of 2 recording setting can be congured. Recording name: Enter a name for the recording setting Enable this recording: Select this option to enable vide[...]

63 D-Link DCS-7110 User Manual Conguration Enable cyclic recording: If you select this item, when the maximum capacity is reached, the oldest le will be overwritten by the latest one. The reserved amount is reserved for cyclic recording to prevent malfunction. This value must be larger than 15 Mbytes. If you want to enable recording notica[...]

64 D-Link DCS-7110 User Manual Conguration Digital PTZ You can set a total of 20 preset positions and select preset positions for the camera to patrol. Please follow the steps below to preset a position: 1. Adjust the shooting area to the desired position using the buttons on the right side of the window. 2. Enter a name for the preset position,[...]

65 D-Link DCS-7110 User Manual Conguration Mechanical PTZ To utilize this feature, please connect the camera to a PTZ driver or scanner via RS485 interface rst. Then you can congure the PTZ driver and RS485 port with the following setting. Enable Mechanical PTZ Operation: Select this option to disable this function. Camera ID: The Camera I[...]

66 D-Link DCS-7110 User Manual Conguration Parity Bit: Parity is a form of error checking used in serial communication. For even and odd parities, the serial port sets the parity bit (the last bit after the data bits) to a value to ensure that the transmission has an even or odd number of logic high bits. For example, if the data is 011, for eve[...]

67 D-Link DCS-7110 User Manual Conguration Live Video Page Conguration Preview: It shows the new layout of Logo/Background/Title based on user setting. Logo Graphic: You can change the logo at the top of your Live Video page. Follow the steps below to upload a new logo: 1. Click Custom and the Browse eld will appear. 2. Select a logo from [...]

68 D-Link DCS-7110 User Manual Conguration HTML Code Examples This page can generate example HTML code for you, thus you can paste the code into your own web page and get the embedded live video feed. Stream: Select from stream 1 to 4, it will base on the prole of selected stream to generate the code accordingly. Up to 10 clients are supporte[...]

69 D-Link DCS-7110 User Manual Conguration User Settings This section explains how to enable password protection and create multiple accounts. Admin Password Setup: The administrator account name is “admin”, which is permanent and cannot be deleted. The default of password is empty. Add user account: Add a new user account. Username: Enter a[...]

70 D-Link DCS-7110 User Manual Conguration Device Settings Turn off the LED indicator: Select this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Camera Name: Create a unique name for your camera.[...]

71 D-Link DCS-7110 User Manual Conguration Time and Date Automatically or manually congure, update, and maintain the internal system clock for your camera. Current Server Time: Displays camera's current time. Time Zone: Select your time zone from the drop-down menu. Enable Daylight Saving: Select this to enable the daylight saving time ([...]

72 D-Link DCS-7110 User Manual Conguration Maintenance This chapter explains how to restore the camera to factory default, upgrade rmware version, etc. Reboot: This feature allows you to reboot the camera, which takes about one minute to complete. When completed, the live video page will be displayed in your browser. The following message wil[...]

73 D-Link DCS-7110 User Manual Conguration Export language le: Click to export language strings. DCS-7110 provides 5 languages: English, Deutsch, Español, Français, Italiano. Upload custom language le: Click Browse… and specify your own custom language le to upload. Export setting backup le: Click to export all parameters for the[...]

74 D-Link DCS-7110 User Manual Conguration Parameter List The Parameters List page lists the entire system’s parameters in alphabetical order. If you need technical assistance, please provide the information listed on this page.[...]

75 D-Link DCS-7110 User Manual Conguration Logs This section explains how to congure the camera to send the system log to the remote server as backup. Remote Log: You can congure the camera to send the system log le to a remote server as a log backup. Before utilizing this feature, it is suggested that the a log-recording tool be rst[...]

76 D-Link DCS-7110 User Manual Appendix A - Technical Specications Technical Specications Appendix A - Technical Specications Camera Hardware Profile  1/4” Megapixel progressive CMOS sensor  15 meter IR illumination distance  Built-in Infrared-Cut Removable (ICR) Filter module  4 mm fixed lens , F1.5 with 65.4 degree horizo[...]

77 D-Link DCS-7110 User Manual Appendix A - Technical Specications General Power Input 12 V DC 1.25 A, 24 V AC, 50/60 Hz, 802.3af PoE Max. Power Consumption 6 W Operating T emperature -20 to 50 ˚C (-4 to 122 ˚F) Storage T emperature -20 to 70 ˚C (-4 to 158 ˚F) Humidity 90% non-condensing W eight 783 g Certifications CE (Class A), L VD, FCC [...]