D-Link DI-704UP Bedienungsanleitung

Manual D-Link DI-704UP Building Networks for People Express EtherNetwork TM Broadband Router with USB Print Server[...]

2 Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Features and Benefits ........................................................................... 5 LEDs ...................................[...]

3 Content s of Package: D-Link DI-704UP Express EtherNetwork Broadband Router with USB Print Server Manual, W arranty and Print Server Sof tware on CD Quick Installation Guide Package Content s If any of the above items are missing, please contact your reseller . System Requirement s for Configuration:   Power Adapter - AC 5V , 2A  W ARNIN[...]

4 Introduction Thank you for purchasing the DI-704UP Express EtherNetwork Broadband Router with USB Print Server . The DI-704UP is an Ethernet Broadband Router with a built-in 4-port switch. It also features a USB port to share a USB printer on the home or office network and includes a print server application for Windows. As many as four computers[...]

5 Network Address T ranslation - NA T allows your private net- work to share a single public IP address. All your computer con- nected to the DI-704UP will be on a private network shielded from Internet intruders.  Features & Benefit s  Firewall Features  Filtering - Easily applied filtering based on Media Access Con- trol (MAC) Addres[...]

6 LEDs LED LED Activity Power A solid light indicates a proper connection to the power supply . S tatus WAN A Solid light indicates connection on the WAN port. This LED blinks during data transmission. Flashes consistently to indicate that the DI-704UP is working properly . A solid light indicates that the unit is not working properly . LOCAL NETWO[...]

7 Connections W ARNING! Using a power supply with a different voltage rating than the one in- cluded with the DI-704UP will cause damage and void the warranty for this product. Receptor for Power Adapter Reset button is to reset the device to its factory default settings. Reset Button Printer Port WAN port is the connection point for your DSL or Ca[...]

8 Introduction to Broadband Router T echnology A router is a device that forwards data packets from a source to a destination. Routers can work on Open System Interconnection (OSI) layer 3, which for- wards data packet s using an IP address and not a MAC address. A router will forward data from the Internet to a particular computer on your LAN. The[...]

9 Introduction to Local Area Networking A Local Area Network (LAN) is typically an Ethernet-based network that con- nects several computers together over a small area such as a building or group of buildings. LAN’ s can also be connected over large areas. A collection of LANs connected over a large area is called a Wide Area Network (WAN). There [...]

10 Sample Scenario Y ou will need broadband Internet access (a Cable or DSL subscription line into your home or office) Consult with your Cable or DSL provider for proper installation of the modem Connect the Cable or DSL modem to the DI-704UP wireless broadband router ( see the Quick Installation Guide included with the DI-704UP . ) If you are con[...]

11 Note: Please see the Manual included with your modem for an explanation of the modem’s LEDs. Network Setup T urn everything off. A. Power OFF your Cable or DSL modem. If your modem does not have an on/off switch, disconnect the power cable. B. T urn OFF your computer . C. Do NOT connect the power adapter to your D-Link router . Connect the D-L[...]

12 Using the Setup Wizard The logon pop-up screen will appear . Once you have logged in, the Home screen will appear . Click Run Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key . T ype “admin” for the username and leave the password field blank. Click OK[...]

13 Y ou will see the following screens Using the Setup Wizard (continued) Set up your new password . Y ou have the option to establish a password. Click Next Click Next[...]

14 Select your Internet Connection. Y ou will be prompted to select the type of Internet connection for your router . Using the Setup Wizard (continued) Set up your Time Zone . Yo u have the option to the set standard time for your router . T o change the default selection, select the drop down arrow and choose the correct time zone. Click Next If [...]

15 Using the Setup Wizard (continued) If you selected Dynamic IP Address , this screen will appear: (Used mainly for Cable Internet service.) If your ISP requires a Static IP Address , and this option is selected, then this screen will appear: Enter the IP Address informa- tion originally provided to you by your ISP . Y ou will need to complete all[...]

16 If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) Enter in the username and password provided to you by your ISP . Using the Setup Wizard (continued) Please be sure to remove any existing PPPoE client software installed on your comput[...]

17 Using the Configuration Menu Whenever you want to configure your network or the DI-704UP , you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DI- 704UP . The DI-704UP default IP Address is shown below: Open the web browser . T ype in the IP Address of the DI-704UP . Home > Wizard Note: If you [...]

18 The Home>Wizard screen will appear upon log in. Please refer to the Quick Instal- lation Guide for more information regarding the Setup Wizard. Using the Configuration Menu (continued) Clicking Apply will save changes made to the page Clicking Cancel will clear changes made to the page Clicking Help will bring up helpful information regarding[...]

19 Using the Configuration Menu (continued) Home > W AN (continued) W AN is short for W ide Area Network. The W AN settings can be referred to as the Public settings. All IP information in the W AN settings are public IP addresses which are accessible on the Internet. The WAN settings consist of four options: Dynamic IP Address , Static IP Addre[...]

20 MAC Address: The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router . Y ou can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address. It is not recommended that you change the default MAC address[...]

21 IP Address: Public IP address provided by your ISP . Subnet Mask: Subnet mask provided by your ISP . ISP Gateway Address: Public IP address of your ISP that you are connecting to. Primary/Secondary DNS Address: Enter a DNS Address if you do not wish to use the one provided by your ISP . MTU: Enter an MTU value only if required by your ISP . Othe[...]

22 Using the Configuration Menu (continued) Home > W AN > PPPoE Please be sure to remove any Client Software program on your computer before you start your configuration of the DI-704UP Router . Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses PPPoE connection. Y our ISP will provide you with a username and password. This[...]

23 Using the Configuration Menu (continued) Home > W AN > PPPoE (continued) Retype Password: Re-enter PPPoE password. Service Name: Enter the service name provided by your ISP . (optional) IP Address: This option is only available for S tatic PPPoE. Enter in the st atic IP address for the PPPoE connection. Primary DNS Address: Primary DNS IP [...]

24 Dynamic IP Address for PPTP is a W AN connection used in Europe. Using the Configuration Menu (continued) Home > W AN > PPTP My IP Address: Enter in the IP address for the PPTP connection. My Subnet Mask: Enter the subnet mask information. Server IP: Enter the Server IP address. By default, its set to 192.168.0.1[...]

25 PPTP Account: Enter in the username for the PPTP account. Maximum Idle Time: The amount of time of inactivity before disconnecting your PPTP session. Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maint ained during inactivity . If the connection is inactive for longer than the defi[...]

26 Account: Enter in the username for the BigPond account. Password: Enter the password for the BigPond account. Login Server: (Optional) Enter the Login Server name if required. Auto-reconnect: If enabled, the device will automatically connect to your ISP after your unit is re- started or when the connection is dropped. Dynamic IP Address for BigP[...]

27 Using the Configuration Menu (continued) Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-704UP . These settings may be referred to as Private settings. Y ou may change the LAN IP address if needed. The LAN IP address is private to your internal[...]

28 DHCP stands for Dynamic Host Control Protocol. The DI-704UP has a built-in DHCP server . The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically .” When you turn your computers [...]

29 Using the Configuration Menu (continued) Home > DHCP S tatic DHCP allows computers on the LAN to receive the same DHCP IP address everytime it boots up. Y ou can bind a specific IP address to a specific computer based on the computer’s MAC address. Starting IP address: The starting IP address for the DHCP server’s IP assignment. Ending IP[...]

30 Using the Configuration Menu (continued) Advanced > Virtual Server The DI-704UP can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-704UP firewall feature filters out unrecognized packets to p[...]

31 Using the Configuration Menu (continued) Advanced > Virtual Server The DI-704UP is also capable of port-redirection meaning incoming traffic to a particular port can be redirected to a different port on the server computer . Each of the virtual services that are created will be listed at the bottom of the screen in the Virtual Servers List. T[...]

32 Using the Configuration Menu (continued) Advanced > Virtual Server Example #2: If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP . Name: FTP Server Private IP: 192.168.0.30 Prot[...]

33 Using the Configuration Menu (continued) Advanced > Application Some applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony . These applications have dif ficulty working through NA T (Network Address T ranslation). Special Applications makes some of these applications work with the DI-70[...]

34 Using the Configuration Menu (continued) Advanced > Application At the bottom of the screen, there are defined special applications. T o use them, select one from the drop down list and select an ID number you want to use. Then click the “Copy to” button and the router will fill in the appropriate information to the list. Y ou will then n[...]

35 Using the Configuration Menu (continued) Advanced > IP Filter Use IP (Internet Protocol) filters to allow or deny computers access to the Internet based on their IP address.[...]

36 Using the Configuration Menu (continued) Advanced > IP Filter Protocol: Select the protocol type to block certain IP addresses. IP Address: Enter in the IP address range of the computers that you want the policy to apply to. If it is only a single computer that you want the policy applied to, then enter the IP address of that computer in the [...]

37 Using the Configuration Menu (continued) Advanced > MAC Filters MAC (Media Access Control) Filters are used to allow or deny LAN (Local Area Network) computers from accessing the Internet and network by their MAC address. At the bottom of the screen, there is a list of MAC addresses from the DHCP client computers connected to the DI-704UP . T[...]

38 Using the Configuration Menu (continued) Advanced > MAC Filters MAC Address: Enter the MAC Address of the client that will be filtered. DHCP Client: Select from the DHCP Client list and click the Clone button to automatically clone that computer’s MAC address to the MAC address field. Name: Enter the Name to create a profile for the associa[...]

39 Using the Configuration Menu (continued) Advanced > URL Blocking Use URL Blocking filters to disallow computer(s) to access Internet with the following URL keywords entered into the list. The URL Blocking filters are useful features that are similar to parental control. Users can enter keywords that may have adult content, hack, or other mate[...]

40 Using the Configuration Menu (continued) Advanced > Domain Filter Use Domain filters to allow or deny computers access to specific Internet domains whether it is through www , ftp, snmp, etc. Domain filters apply to wired computers connected to one of the four Ethernet LAN ports to the DI-704UP .[...]

41 Using the Configuration Menu (continued) Advanced > Domain Filter Delete: Select this option to remove the domain suffix from the Permitted Domains or Blocked Domains list. Permitted Domains: Enter in the domain suffix of the Internet domain you want to use. (Example: shopping.com, sports.net.) Deny users to access the following domains and p[...]

42 Firewall Rules is an advanced feature used to allow or deny traffic from passing through the Broadband Router . It works in the same way as IP Filters with additional settings. Y ou can create more detailed access rules for the DI-704UP . When virtual services are created and enabled, it will also display in Firewall Rules. Firewall Rules contai[...]

43 Using the Configuration Menu (continued) Advanced > SNMP SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DI-704UP . The DI- 704UP supports SNMP v1. Enabl[...]

44 Using the Configuration Menu (continued) Advanced > DDNS DDNS (Dynamic Domain Name System) keeps dynamic IP addresses ( e.g. , IP ad- dresses assigned by a DHCP capable router or server) linked to a domain name. Users who have a Dynamic DNS account may use this feature on the DI-704UP . DDNS: When an IP address is automatically assigned by a [...]

45 Using the Configuration Menu (continued) Advanced > Routing S tatic routes can be added if you require specific routes within your internal network. These routes will not apply to the WAN network. Hop Count - in a transmission path, each link is terminated at a network device such as a router or gateway . The number of hops equals the number [...]

46 Using the Configuration Menu (continued) Advanced > DMZ If you have a computer that cannot run Internet applications properly from behind the DI-704UP , then you can allow that computer to have unrestricted Internet access. En- able this feature and enter the IP address of that computer as a DMZ (Demilitarized Zone) host with unrestricted Int[...]

47 Using the Configuration Menu (continued) T ools > Admin Administrator Settings At this page, the DI-704UP administrator can change the system password. There are two accounts that can access the Broadband Router’s Web-Management interface. They are admin and user . Admin has read/write access while user has read-only access. User can only v[...]

48 Using the Configuration Menu (continued) T ools > Admin Remote Management: Remote Management allows the DI-704UP to be configured from the Internet by a web browser . A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform “Admin[...]

49 Using the Configuration Menu (continued) T ools > System Save Settings to Local Hard Drive: Click Save to save the current settings to the local Hard Drive Load Settings from Local Hard Drive: Click Browse to find the settings file, then click Load Restore to Factory Default Settings: Click Reset to Default to restore the factory default sett[...]

50 Using the Configuration Menu (continued) T ools > Firmware Y ou can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com . Make sure that the firmware you want to use is saved on the local hard drive of your computer . Click on Browse to search the local hard drive for [...]

51 Using the Configuration Menu (continued) T ools > Misc[...]

52 Using the Configuration Menu (continued) T ools > Misc Block W AN Ping: Click Enable to block the WAN ping. Computers on the Internet will not get a reply back from the DI-704UP when it is being “ping”ed. This may help to increase security . Reboot: Click Reboot to restart the unit. SPI Mode: S tateful Packet Inspection is a form of firew[...]

53 Using the Configuration Menu (continued) Status > Device Info This page in the Configuration Utility displays the current information for the Broadband Router . It will display the WAN, LAN, and MAC address information. If your W AN connection is set up for Dynamic IP address a Release button and Renew button will be displayed. Use Release to[...]

54 Using the Configuration Menu (continued) Status > Device Info LAN LAN MAC Address: Displays the LAN port MAC/hardware address. IP Address: LAN/Private IP Address of the DI-704UP . Subnet Mask: LAN/Private Subnet Mask of the DI-704UP . WA N W AN MAC Address: Displays the WAN port MAC/hardware address. IP Address: W AN/Public IP Address. Subnet[...]

55 Using the Configuration Menu (continued) Status > Log The Broadband Router keeps a running log of events and activities occurring on the router . If the device is rebooted, the logs are automatically cleared. Y ou may save the log files under Log Settings . First Page: The first page of the log. Last Page: The last page of the log. Previous: [...]

56 Using the Configuration Menu (continued) Status > Log Settings Send E-Mail alert to: Enter in the email address of the recipient who will receive the email log. Log Settings Displays the logs of activities and events, and can be setup to send these logs to another location. E-Mail Alert: The DI-704UP can be set up to send the log files to a s[...]

57 Using the Configuration Menu (continued) Help Help This menu displays the complete Help menu. For help at anytime, click on the Help tab in the configuration menu.[...]

58 Inst alling the Print Server Sof tware Insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically . If it is not, please run “install.exe” on the CD-ROM. Click Next Click Install Print Server Software Click to Install Print Server Software for either Windows 98SE/ME or Windows 2000/XP[...]

59 Inst alling the Print Server Software (continued) Select the destination folder . Af ter rebooting your computer , the software installation procedure is finished. Click Next Click Browse to select a destination folder Click Finish Click OK Select the option for restarting the computer .[...]

60 Configuring on Windows 98SE/ME Plat forms After you finish the software installation proce- dure, your computer will be capable of network printing provided by the DI-704UP . On a Win- dows 95/98 platform, open the Printers win- dow in the My Computer menu. Now , you can configure the print server of the DI-704UP: Find the corresponding icon for[...]

61 Configuring on Windows XP/2000/NT Plat forms The configuration procedure for a Windows 2000/XP platform is similar to that of Win- dows 95/98 except the screen of printer Prop- erties : Click Port Click Configure Port T ype in the IP address of the DI-704UP . Click OK (Note: Screen shots are taken in Windows 2000, similar screens will appear in [...]

62 In this section you will learn how to establish a network at home or work, using Microsof t Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsof t.com/windows2000 for information about networking computers using Windows 2000, ME or 98SE. Go to Start>Control Panel>Network Connections Selec[...]

63 Please follow all the instructions in this window: Networking Basics (continued) Click Next In the following window , select the best description of your computer . If your computer connects to the Internet through a gateway/router , select the second option as shown. Click Next Using the Network Setup Wizard in Windows XP[...]

64 Enter a Computer description and a Computer name (optional.) Networking Basics (continued) Click Next Enter a Workgroup name. All computers on your network should have the same W orkgroup name. Click Next Using the Network Setup Wizard in Windows XP[...]

65 Please wait while the Network Setup Wizard applies the changes. Networking Basics (continued) When the changes are complete, click Next . Please wait while the Network Setup Wizard configures the computer . This may take a few minutes. Using the Network Setup Wizard in Windows XP[...]

66 Networking Basics (continued) Insert a disk into the Floppy Disk Drive, in this case, drive A. Format the disk if you wish, and click Next. In the window below , select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Us[...]

67 Networking Basics (continued) Please read the information under Here’ s how in the screen below . After you com- plete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. Please wait while the Network Setup Wizard copies the files. T o continue, click Next [...]

68 Networking Basics (Continued) The new settings will t ake ef fect when you restart the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer . Next, you will need to run the Network Setup Disk on all the other computers on your network. After run- ning the Network Setup Disk on all your computers, your new[...]

69  Networking Basics (Continued)      Select the Computer Name T ab in the System Properties window . Enter a Computer De- scription ; this field is optional. T o rename the computer or join a domain, Click Change . T o name your computer , please follow these directions: In Windows XP : Click Start (in the lower left corner of t[...]

70 Assigning a S tatic IP Address in W indows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Ad- dresses to the computers on the network, using DHCP (Dynamic Host Configura- tion Protocol) technology . If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not us[...]

71 Networking Basics (Continued) Assigning a Static IP Address in W indows XP/2000  Double-click on Network Connections   Double-click on Properties Right-click on Local Area Connections[...]

72 Networking Basics Assigning a S tatic IP Address in Windows XP/2000 Y ou have successfully assigned a St atic IP Address.   IP address: e.g ., 192.168.0.2 Subnet mask: 255.255.255.0 Default gateway: Enter the LAN IP address of the wireless router . (D-Link wireless routers have a LAN IP address of 192.168.0.1) In the window below , select [...]

73 Networking Basics (Continued) Go to the Apple Menu and select System Preferences Double-click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull-down menu Click Apply Now The IP Address, Subnet mask , and the Router ’s IP Address will appear in a few seconds       Selecting [...]

74 Networking Basics Checking the Connection by Pinging in Windows XP and 2000 Checking the Connection by Pinging in Windows Me and 98 Go to Start > Run > type cmd . A window similar to this one will appear . T ype ping xxx.xxx.xxx.xxx , where xxx is the IP Address of the Router or Access Point. A good wireless connection will show four repli[...]

75 Resetting the DI-704UP to the Factory Default Settings After you have tried other methods for troubleshooting your network, you may T o hard-reset the D-Link DI-704UP to the Factory Default Settings, please do the following:   Use a paper clip to press the Reset button and power on. Locate the Reset button on the back of the DI-704UP . [...]

76 Standard IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3 NW ay Auto-Negotiation USB 1.1 VPN Pass Through PPTP L2TP IPSec Ports One WAN Four LAN LEDs Power WAN Printer Local Network - 10/100 Operating T emperature 32 o F to 131 o F (0 o C to 55 o C) Humidity 95% maximum (non-condensing) T echnical S pecifications Powe[...]

77 Frequently Asked Questions When entering the IP Address of the DI-704UP (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built- in to a ROM chip in the device itself. Y our computer must be on the same IP subnet to connect to the web-based utility . T o resolve difficulties[...]

78 Frequently Asked Questions (continued) What type of cable should I be using? (continued) What´s the difference between a crossover cable and a straight-through cable? The wiring in crossover and straight-through cables are different. The two types of cable have different purposes for different LAN configurations. EIA/TIA 568A/568B define the wi[...]

79 Step 3 Configure your Internet settings. Step 2 Disable any Internet security software running on the computer . Software firewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or config[...]

80 Frequently Asked Questions (continued) Step 4 Check your IP Address. Y our computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in W indows 95, 98, or ME? Step 1 Click on Start , then click on Run . S tep 2 The Run Dialogue Bo[...]

81 Frequently Asked Questions (continued) Step 4 (continued) Check your IP Address. Y our computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. How can I find my IP Address in W indows 2000/XP? Step 1 Click on Start and select Run . S tep 2 T ype cmd then cli[...]

82 Frequently Asked Questions (continued) Step 4 (continued) Check your IP Address. Y our computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the 192.168.0.X range. Make sure you take note of your computer´s Default Gateway IP Address. The Default Gateway is the IP Address of th[...]

83 Frequently Asked Questions (continued) How can I assign a S t atic IP Address in W indows 2000? (continued) Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router . Example: If the router´s LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X = 2-99. Make sur[...]

84 Frequently Asked Questions (continued) How can I assign a S t atic IP Address in W indows 98/Me? (continued) Step 2 Click Specify an IP Address . Step 3 Click on the Gateway tab. Enter the LAN IP Address of your router here (192.168.0.1). Click Add when finished. Step 4 Click on the DNS Configuration tab. Enter in an IP Address that is on the sa[...]

85 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection? Dynamic Cable connection ( i.e. Cox, Adelphia, Rogers, Roadrunner , Charter , and Comcast). Note: Please configure the router with the computer that was last connected directly to the cable modem. Step 1 Log into the web based configuration by[...]

86 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection? (continued) Step 3 Power cycle the cable modem and router: First turn the cable modem off. Next, turn the router off Leave them off for 2 minutes**. After 2 minutes**, turn the cable modem on. Wait until you get a solid cable light on the cabl[...]

87 Frequently Asked Questions (continued) How can I setup my router to work with Earthlink DSL or any PPPoE connection? Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet. Step 1 Upgrade Firmware if needed. (Please visit the D-Link tech support [...]

88 Step 8 Click Apply . When prompted, click Continue . Once the screen refreshes, unplug the power to the D-Link router . Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to your ISP , plug the power back into the D-Link router . W ait about 30 seconds and log back into the router . Step 10 Click [...]

89 Frequently Asked Questions (continued) How do I open ports on my router? T o allow traffic from the Internet to enter your local network, you will need to open up ports or the router will block the request. Step 1 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser . The userna[...]

90 Frequently Asked Questions (continued) What is DMZ? Demilitarized Zone: In computer networks, a DMZ (Demilitarized Zone) is a computer host or small network inserted as a neutral zone between a company´s private network and the outside public network. It prevents outside users from getting direct access to a server that has company data. (The t[...]

91 Frequently Asked Questions (continued) Step 2 Log into the web based configuration of the router by typing in the IP Address of the router (default:192.168.0.1) in your web browser . The username is admin (all lowercase) and the password is blank (empty). How do I configure the DMZ Host? (continued) Step 3 Click the Advanced tab and then click o[...]

92 Frequently Asked Questions (continued) How do I open a range of ports on my DI-704UP using Firewall rules? Step 1 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser . The username is admin (all lowercase) and the password is blank (empty). If you are having difficulty accessin[...]

93 Frequently Asked Questions (continued) What are virtual servers? A Virtual Server is defined as a service port, and all requests to this port will be redirected to the computer specified by the server IP . For example, if you have an FTP server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN server (port 1723) at 192.1[...]

94 Frequently Asked Questions (continued) Step 6 Create a second entry as shown. Step 7 Click Apply and then click Continue . Step 8 Create a third and final entry as shown here: Step 10 Run PCAnywhere from the remote site and use the W AN IP Address of the router , not your computer´s IP Address. Step 9 Click Apply and then click Continue . pcany[...]

95 How can I use eDonkey behind my D-Link Router? Frequently Asked Questions (continued) Y ou must open ports on your router to allow incoming traf fic while using eDonkey . eDonkey uses three ports (4 if using CLI): 4661 (TCP) T o connect with a server 4662 (TCP) T o connect with other clients 4665 (UDP) T o communicate with servers other than the[...]

96 Frequently Asked Questions (continued) T o play SOCOM and hear audio, you must download the latest firmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation. Step 1 Upgrade the firmware. Step 2 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1[...]

97 NAME - Gamespy1 PRIV A TE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIV A TE PORT - 3783 PUBLIC PORT - 3783 SCHEDULE - Always. NAME - Gamespy2 PRIV A TE IP - The IP Address of your computer that you a r e running Gamespy from. PROTOCOL TYPE - Both PRIV A TE PORT - 6500 PUBLIC PORT - 6500 SCHEDU[...]

98 Note: Make sure that you did not enable proxy/firewall in the KaZaA software. Frequently Asked Questions (continued) How do I configure my router for KaZaA and Grokster? The following is for KaZaA, Grokster , and others using the FastTrack P2P file sharing system. In most cases, you do not have to configure anything on the router or on the Kazaa[...]

99 Frequently Asked Questions (continued) How do I configure my router to play W arcraft 3? T o host a Warcraf t 3 game, you must open ports on your router to allow incoming traffic. T o play a game, you do not have to configure your router . W arcraft 3 (Battlenet) uses port 61 12. For the DI-704UP: Step 4 Click Apply and then Continue . Note: If [...]

100 Frequently Asked Questions (continued) How does NetMeeting work with my D-Link Router? Unlike most TCP/IP applications, NetMeeting uses DYNAMIC PORTS instead of ST A TIC PORTS. That means that each NetMeeting connection is somewhat different than the last. For instance, the HTTP web site application uses port 80. NetMeeting can use any of over [...]

101 Frequently Asked Questions (continued) Step 3 Create a new firewall rule: Leave the second box empty . Under Protocol, select UDP . In the port range boxes, enter 5060 in the first box and leave the second box empty . Click Always or set a schedule. Step 4 Click Apply and then Continue . Step 5 Repeat steps 3 and 4 enter ichat2 and open ports 1[...]

102 Frequently Asked Questions (continued) If using Mac OS X Firewall, you may need to temporarily turn off the firewall in the Sharing preference pane on both computers. T o use the Mac OS X Firewall, you must open the same ports as in the router: Step 1 Choose Apple menu > System Preferences . Step 2 Choose View > Sharing . Step 3 Click the[...]

103 Frequently Asked Questions (continued) How do I send or receive a file via iChat when the Mac OSX firewall is active? -for Macintosh users- Mac OS X 10.2 and later “iChat cannot send or receive a file when the Mac OS X firewall is active in its default state. If you have opened the AIM port, you may be able to receive a file but not send them[...]

104 What is NA T? NA T st ands for Network Address T ranslator . It is proposed and described in RFC- 1631 and is used for solving the IP Address depletion problem. Each NA T box has a table consisting of pairs of local IP Addresses and globally unique addresses, by which the box can “translate” the local IP Addresses to global address and vice[...]

105 T echnical Support Y ou can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phon[...]

106 W arranty and Registration (USA only) Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered with[...]

107 • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if reque[...]

108 Limitation of Liability: T O THE MAXIMUM EXTENT PERMITTED BY LAW , D-LINK IS NOT LIABLE UNDER ANY CONTRACT , NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUIT ABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT , INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL (INCLUDING , BUT NOT LIMITED TO, DAMA[...]