Daewoo F227B Bedienungsanleitung

NEXT T ype No. L17A0D080 User’ s Guide Daewoo Computer F227B TFT LCD Color Monitor[...]

U.S.A. U.S.FEDERAL COMMUNICA TIONS COMMISSION RADIO FREQUENCY INTERFERENCE ST A TEMENT INFORMA TION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits ar e designed to pr ovide r easonable pr otection against harmful interfer ence in a[...]

Contents 1. Introduction ...................................1/22 2. Safety Information ........................1/22 3. Installing the monitor ...................4/22 3-1. Packing List .........................................4/22 3-2. Instructions to Install the Stand ........5/22 3-3. Selecting a suitable location ..............6/22 3-4. Connectin[...]

1. Introduction 2. Safety Information 1/22 This manual contains instructions for installing and operating Daewoo Computer F227B . Daewoo Computer F227B is a highly ergonomic color display unit. • 17" viewable SXGA LCD • High quality screen r e-scaling capability • 100-240V AC input voltage • VESA DPMS (Display Power Management Signalin[...]

2/22 A void operating the monitor in extr eme heat, humidity or areas af fected by dust. T emperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off befor e plugging the power cord into the socket. Make sur e that the power cord and the other cor ds ar e secur ely and rightly connected. Overloaded AC outlets and extension cords ar e d[...]

Cleaning and Maintenance • T o avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user -serviceable. Remember to unplug the display unit from the power outlet before cleaning. • Do not use alcohol (methyl, ethyl or isopropyl) or any str ong dissolvent. Do not use thinner or benzene, abrasive cleaners or c[...]

4/22 The following items should be found in the packaging. Above power cord can be changed upon dif ferent voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cor d packed in the product or longer than 3m may affect EMC of the pr oduct in operating condition. 3. Installing the monitor 3-1. Packin[...]

3-2. Instructions to Install the Stand Install the stand according to the following instructions on a flat surface. 1. Place the main unit body with scr een face down and flip open the folded Stand Post at 12 0 deg r ee angle. 2. Engage the Base to the Stand Post by pr essing down gently in right position (If installed correctly you will hear a cli[...]

6/22 3-3. Selecting a suitable location 3-4. Connecting the monitor • Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. • Place the monitor in a position where no light shines dir ectly onto or is reflected on the scr een. • T o reduce eye strain, avoid insta[...]

7/22 5. T urn on the power to the computer . The pictur e will appear within about 10 seconds. Adjust the picture to obtain optimum pictur e quality . See section Adjusting the picture in this guide for mor e information. LINE OUT F22 7 B 1 7 " TFT LCD Color Monitor[...]

• Audio system 8/22 ! ! This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 2W rms (max.) output power . This system also supports a headphone output jack. When this monitor is turned on, audio is always set up as off mode. Please use AUDIO direct access button on the fr ont cover or On Screen [...]

9/22 3-5. Setting the r efresh rate Follow the instructions below to set your refr esh rate in Windows 98/ME/XP/2000. 1. Go to the configuration window(Start-Settings-Configuration window). 2. Double click on the ‘ Display ’ icon. 3. Click on the ‘ Settings ’ tab. 4. Click on the ‘ Advanced ’ button. 5. Click on ‘ Adapter ’ and sele[...]

Preset Timing T able If the signal from the system doesn't equal to the pr eset timing mode, adjust the mode with refer ence to the user guide of videocard because the screen may not be displayed. The recommended setting is a r esolution of 1280x1024 and a refresh rate of 60Hz. 10/22 No. 1 2 3 4 5 6 7 8 9 10 Resolution 720 x 400 640 x 480 640 [...]

3-6. User’ s Environment Kensington Security (Locking) Slot Recommended Ergonomic User ’ s Environment • Viewing angle of the monitor should be between 0~20 degree. • This display unit supports a Kensington-type security device to secure your monitor . Kensington lock is not included. • T o purchase and install the Kensington locking devi[...]

VESA MOUNT ’ G • This display unit supports VESA FPMPMI standard for 75mm x 75mm scr ew mounting by giving 4 screw holes inside the base stand of the unit. • For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. Only M4 x12 size screw should be used for pr oper mounting. (Using wrong size scr ew may cause [...]

4. Adjusting the picture 13/22 Y ou can adjust the screen display by using the buttons located below the screen. 1280x1024 H:63.9 V :60.0 BRIGHTNESS BRIGHTNESS F22 7 B 1 7 " TFT LCD Color Monitor[...]

14/22 1. Push the MENU button to call the OSD to the screen. The r esolution and frequency ar e displayed at the top of the menu box for your information. 2. Push the or button to choose the item you want to adjust. The selected item is highlighted. 3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selecti[...]

15/22 4-3. OSD Adjustments The OSD adjustments available to you are listed below . BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature af fects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatur es bluish. There ar e three co[...]

16/22 CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire scr een image. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER Y ou can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on [...]

AUDIO VOLUME Adjust the audio volume level. AUDIO This menu is used to choose audio on or off. AUTO ADJUST Y ou can adjust the shape of screen automatically at the full scr een pattern. 17/22 F22 7 B 1 7 " TFT LCD Color Monitor[...]

If the power management function of your computer is enabled, your monitor turns on and off automatically . Y ou can control power management featur es fr om your computer . Y our computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. Y ou can reactivate the system by p[...]

6. T roubleshooting 19/22 Problem Blank screen Error message: Video mode not supported The display does not enter power management mode Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer , check that the computer is switched on. T[...]

20/22 Possible solution Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. T ry another color temperature. Adjust the picture characteristics as described in the section OSD Adjustment(4-3). A problem with your graphics adapter or display unit. Contact your service repr esentative. Chec[...]

Possible solution LED Indicator can be orange color on changing of video mode or Input Signal. Check the Resolution and the frequency on the video part of your computer . Compare these values with the data in the Preset Timing T able. Problem The power LED is a orange color 21/22 Contacting service If the above troubleshooting hints do not help you[...]

22/22 17"viewable, Diagonal, Pixel pitch 0.264 mm, A-Si TFT 2 5 0cd/m 2 16msec (Typ.) 337.92 x 270.336 mm R.G.B Analog, 15 pin D-sub Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz 135 MHz 1280 x 1024@75Hz 1280 x 1024@60Hz 100-240 VAC, 1.0A 35W(Typ.) VESA DPMS VESA DDC 1/2B BRIGHTNESS, CONTRAST, COLOR CONTROL, POSITION, CLOCK PHASE, MISCEL[...]