Datamax 4406 Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 146 Seiten
- 3.33 mb
Zur Seite of
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Datamax 4406 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Datamax 4406, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Datamax 4406 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Datamax 4406. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Datamax 4406 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Datamax 4406
- Den Namen des Produzenten und das Produktionsjahr des Geräts Datamax 4406
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Datamax 4406
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Datamax 4406 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Datamax 4406 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Datamax finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Datamax 4406 zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Datamax 4406, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Datamax 4406 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
O perat or ’ s Ma nual D atamax In ter n atio nal H erber t Hou se 12 El izab eth W ay, P i nnacl es Harl ow , Es sex C M19 5FE U K Phone: + 44 127 9 772200 Fax: + 44 12 79 42444 8 Asia -Pac ifi c 19 Loy ang W a y #01-0 1 CI LC Bui ldin g Singa pore 50872 4 Phon e: +6 5 542- 261 1 Fax : + 65 542-36 11 Cor porate Headquarters 4501 Pa r kway C omm [...]
-
Seite 2
[...]
-
Seite 3
Cop yri ght I n f or m ation: CG Tri umvi rate i s a trademark of A g fa Corporati on. CG T i mes based upon T i mes New Roman under l i cense from the Monotype Corporati on. Wi ndows and Wi ndows NT are trademarks and Mi crosoft i s a regi stered trademark of Mi crosoft Corporati on. NetWare and Novel l are regi stered trademarks of Novel l , Inc.[...]
-
Seite 4
A gen cy C om p lia n ce a n d A p p ro v als : C U S List ed UL1950 Informati on T echnol og y Equi pment C22.2 N o. 950-M93 E N60950 For 230 V ol t Operati on (Europe) : Use a cord set, marked “HA R,” consi st i n g of a mi n H05VV -F cord whi ch has a mi ni mum 0. 75 square mm di ameter conductors, provi ded wi th an IEC 320 receptacl e and [...]
-
Seite 5
[...]
-
Seite 6
Im p o r t a nt S af e ty Inst r uct ions: T he ex clam ation point within an equilateral triangle is intended to alert the user to the presence of im portant operating and m aintenance instructions in the literature acco m panying this unit. Th i s un it h as been care fu ll y desi gn ed to provi de y ears of safe, rel i abl e perf orm a n ce. H o[...]
-
Seite 7
i Cont ent s Pr i nt e r O v erv iew 1.0 Abo u t t h e Pri nter..................................................................... 1 1.0.1 Stan d ard F eat ures ................................................... 2 1.0.2 Optio n a l F eat ures ................................................... 2 1.1 Optio n I n st a l latio n....................[...]
-
Seite 8
ii Using th e Front Pa n e l 4.0 Opera tio n .............................................................................. 29 4.0.1 Ready M o de: No rmal Op erat io n ........................... 29 4.0.2 M enu M o de: Co n f iguratio n .................................... 30 4.0.3 Qu ic k T est M o de: Pri n t T est Lab e ls ......................[...]
-
Seite 9
iii 5.2 P rin t head Re p l acem e n t ........................................................ 79 5.3 M ain te na n ce Sc h ed ule ......................................................... 80 5.3.1 Cl ea n i ng t he Pri n t h e ad .......................................... 81 5.3.2 Cl ea n i ng t he Pl a te n Ro l l e r ...........................[...]
-
Seite 10
iv A ppe ndi x E M enu Sy stem M ult i- La n g uage S uppo rt ...................................... 121 Advan c e Fi l e H a nd l i n g I n f o rmatio n ............................................. 124 A ppe ndi x F Savi n g a Co n f i g u ra tio n F i l e ......................................................... 127 War r an t y Inf o r m atio n[...]
-
Seite 11
I- C l a s s 1 Prin te r Ov e r v ie w 1 .0 Abo ut t he P r i nte r C ong ratu lat io n s o n y o u r pu rc h ase of a n I -Class prin t er. T h e I-C lass f a m ily , h ere af t er ref erre d t o as ‘t h e pr in t er’, ble n ds th e r ugg ed d u rab ilit y of d ie-c as t con str u ctio n wi t h s t at e-of - t h e- art elect ron i cs an d u se[...]
-
Seite 12
2I - C l a s s 1. 0. 1 St an d ard Feat u res T h is p rin t er o f f er s th e f ollo win g st a n da rd f eatu res: I - C l ass S ta nd a rd F e atu r e s L i sti n g Mo de l F e atur e 4206 4208 4212 4308 4406 4604 P rin th ead D en sity (D ot s Per In c h ) 203 203 203 300 406 600 D i r e c t T h e r m a l P r i n t i n g XXXXXX O n - D em an d[...]
-
Seite 13
I- C l a s s 3 DMXNe t Th e DMX N e t Print Server C ard is an in t er n al N e twork I n terf ace Co nt roll er (NI C ) t h a t e n abl es t h e pri nter to provide Eth ern e t co nn ectivity . Featu res in clu de: ¾ Aut o m a t ic s el ection of 10 Base2 ( Th i nn e t) or 100BaseT Fas t Et h er n et conn ect io n . ¾ In t e g r al HT TP S er ve[...]
-
Seite 14
4I - C l a s s E xt er nal Media R ewin der (speci fy vol tage requ i rement when orderi ng) A preci si on -cr af ted, bi-direction al rewin ding m ec h a n is m wi th devic e-de pen da n t f eatu r es: ¾ DMX R E W 1 – acco mm odat es 1 t o 4-i n c h (25 to 101 m m ) di a m eter cores; accept s a m a x i m um label w i dth of 4.5 i n c h es (114[...]
-
Seite 15
I- C l a s s 5 rea dability of pr i nt ed bar codes . M in i mum ba r code “X” di m e n s i o n i s 10 m i l s; m a x i m um w i dth is 4 i n c h e s ( 101 m m ). P eel and P r esent Mec hani sm (requi res the Interna l Rew i nd opt i on ) An o utp ut c ont rol devic e t h at a uto m a t ic al ly separ ates pr in t ed l abel s from th e back in[...]
-
Seite 16
6I - C l a s s 1 .1 Optio n I ns t a lla t ion Th e fo ll owi n g t able li sts th e avai labl e opt i on s an d t h e reco m m e n ded qu alif icat io n lev el o f th e i n st aller. F o r d et aile d in f or m at io n con cern i ng a sp ec if ic opt ion , co nt act y o u r deal er or Dat am a x T ec hn i ca l Su pport. E xp e rie n ce L e v e l f[...]
-
Seite 17
I- C l a s s 7 1 .2 H a r d w a r e C om pone nts Th e foll ow in g dra w in g h i gh li ghts th e u ser -a sse ssa b l e c om pon e nts of t h e pri nter. I t e m s de n o ted wi th a n a steri sk ( * ) ar e option a l e qu i p m e nt.[...]
-
Seite 18
8I - C l a s s[...]
-
Seite 19
I- C l a s s 9 Ge ttin g S tarte d 2. 0 Un p acki n g t h e Pri nter In spect th e s h i pping co nt ai n er (s) f or dam a g e ; i f evident , i m m edi at el y n ot i fy th e sh ippi ng co m pa ny to report th e n at u r e a n d e x t e nt of t h e da m a g e . Th e pr i nt er h a s bee n caref u ll y pac k a g ed to avoid da m a g e d u r i ng t[...]
-
Seite 20
10 I -Cla ss 2. 0. 1 I n spect i o n Aft er r em ovi ng th e pri nter fro m th e pac k a g ing m ateri al , c h e ck t h e c o n te nts of th e p a ck a g e. In ad d it ion t o th is m a n u al, th e f ollo w in g it e m s s h o u ld b e in clu de d : ¾ Pri nt er ¾ Po wer C o rd ¾ A ccessories CD ¾ Any speci al or addi tion a l ly pu r c h a se[...]
-
Seite 21
I- C l a s s 11 2. 1 Med ia an d Ri b bo n Sel ecti on Th e fo ll owi n g is a l im i t ed overview of m edi a c h aract eri st ics. For com plete i nfo r m a t i o n a nd a d v i c e r e ga r d i n g yo ur s p e c i fi c a p p l i c a t i o n ne e d s , a l w a ys con s u lt a q u al ified m edia speci alist or a Dat a m a x M edi a Represe n tat [...]
-
Seite 22
12 I -Cla ss res u lt ing i n a d ark er i m ag e. C o n ve rs ely , if th e i m a g e is t oo da rk , redu ce th is val u e . T h e f in al m e th od is t o c h ang e th e ‘P rin t Con t ro l / P rin t S p ee d’ m e nu sett ing (also se lect able a s ‘Pr in t S p eed ’ in m o st soft ware prog ra m s). C h a ng i n g th e pr in t spe ed ch[...]
-
Seite 23
I- C l a s s 13 Setti ng U p the Pri n ter 3.0 In stallatio n Th is section e x plai n s h ow t o co nn ect th e prin t er, a n d load it w ith m edia a n d ri bbon . ; Note: When connecti ng the AC Power Cord or i nterface cab l es to the pr i nter, ensure the Power On/Off Swi tch i s i n the ‘Off’ pos i t i on. n Place t h e pri nt er on a f [...]
-
Seite 24
14 I -Cla ss 3. 0. 1 Co mmu ni cati o n s U s i ng a dat a det ec t ion process, th e int erf ace selection occu rs a u to m at icall y i n th e prin t er. At power- u p, th e pri n t er be g i n s m o n i to ri ng th e i n ter f ace port s f or ac t ivit y . Wh e n th e h ost t ra n s m it s d a t a , th e p rin t er po rt det ec t ing th is d at [...]
-
Seite 25
I- C l a s s 15 Se ri al I n t e r f ace Cab l e Li s ti n g (al l m o d e l s, e xc e p t as n ote d ) Nu ll M od e m ( MX M ) “P C ” (D B 9P ) to Pr in te r Part Number 556000 Part Number 556001 For connect i on to other DCE equ i pment. Flow control i s onl y Xon/Xoff . For connect i on to a PC compat i ble w i th DB9P commun i cat i on port[...]
-
Seite 26
16 I -Cla ss Wh e n f i n ish ed with th e s elf -t est s, th e L E D b lin k s, an d m a y b link a g ain a f t er pr in t er in it ializ at ion is com plet ed . A m be r L ED – g e n era ll y in dic ates job ac t i vity . Wh e n rece ivi ng pri n t jobs ov er t h e n et wor k , th e a m ber L E D b link s; i t rem ai n s ‘O ff ’ du ri ng i [...]
-
Seite 27
I- C l a s s 17 3 .1 Loa din g Me dia B e g i n load in g as f ollo ws: n Ra ise th e A ccess C over. o Ro t at e t h e Print h ead L at c h f orw ar d an d rais e t h e Pri n t h ead Asse m bl y . p Slide t h e Med ia G u ide o u t aw ay f ro m th e f r a m e a n d t h e n l ow er i t t o t h e dow n pos i t ion . q I f u si ng r oll m edia, t h e[...]
-
Seite 28
18 I -Cla ss 3. 1. 1 Ro l l M ed i a T h is lo ad ing m e th od is f or ro ll t y pe m edia ap p lica t ion s. T o loa d : n S lide t h e R o ll M e dia ont o t h e M edia H u b un t il it re st s ag ain st th e Back stop . o Ro ut e th e m edia as sh own : un der th e M edia I dler , th ro ugh th e M e dia Se n sor , th en out t h e f ront o f th [...]
-
Seite 29
I- C l a s s 19 3 .1 .2 Fa n-Fol d M e dia T h is lo ad ing m e th od is f or t a g a n d f a n -f o ld ty pe m ed ia a p p lica t ion s. T o loa d : n B rin g th e m edia in th roug h th e B o tt om o r th e R ea r M ed ia S lot . ( I f u si ng reflective stock , e n s u r e t h a t th e m ark is f acedow n .) o Depen di ng u po n th e e nt ry poi[...]
-
Seite 30
20 I -Cla ss 3. 2 Med ia S en so r A djust m ent Th e Media Sen sor n eeds t o be posi tion e d s o t h a t th e pri nter can de tect th e presen ce of m edia an d th e t op -o f - f or m (e x cept f or cont inu o u s stoc k , w h ere th e TO F is s et th ro ugh pr og r a m m i ng; see L abel L e ngth , Sectio n 4.1.2). To adj u st : n W it h m edi[...]
-
Seite 31
I- C l a s s 21 3 .3 Loa din g Rib bon Ribbon is r equ ir ed w i th th er m al t ra n s f er m e dia . D epe n di ng u po n t h e t y pe o f Ribbon S u ppl y H u b (s ee t h e n e x t pa g e f or e x a m pl es) , th e pr i nter mu st u se ei t h e r ri bbon s w i t h t h e ‘coa ti ng si de i n ’ or r i bbon s wi th t h e ‘coating si de out’[...]
-
Seite 32
22 I -Cla ss ; Note: Di rect i ona l Arrows near the R i bbon Supp l y Hub i nd i cate the correct ri bbon route. R i bbon types are ava il ab l e w i th the i nk (coat i ng) l ayer wound ‘i n’ or ‘out’. These types are NOT i nterchangeab l e for use w i th the pri nter. Ri b b o n Ro uti n g Dia g ra ms ‘Coating Si de I n ’ Ribbo n S u[...]
-
Seite 33
I- C l a s s 23 3. 4 Q u i ck Med ia Cal ib rat i on ☞ When ‘Uncali brated’ i s d i sp l ayed, fo ll ow the M ed i a Sensor Ca li brat i on procedure i n Sect i on 5.0. A t th e f act or y , th e pri n ter is cali brated t o sen se a w ide ran g e o f m edia ty pes. Q ui c k Me d i a Ca l i b r a ti o n fi ne - t u ne s t he me d i a s e ns o[...]
-
Seite 34
24 I -Cla ss 3 .5 Output t ing Labe ls In addi tion t o di r ectly o u tp ut t i ng l abe ls f ro m th e pri nter, t h ere ar e s ever a l op t ion al o u t p ut co n f i gu rat ion s av aila b le. 3. 5. 1 Rew i nd i ng W ith th e In t ern al M ed ia R ewin de r o pt io n , th e p rin t er ca n win d th e prin t ed labe ls an d bac k ing m at eri a[...]
-
Seite 35
I- C l a s s 25 s Rout e th e media back t o t h e Media Rew i n d H u b, as s h ow n bel ow . t In ser t t h e leadi ng ed g e int o a Slot on th e M edia Rewin d Hu b th en i n sert th e M edia Cli p in t o a Slot t o sec u re i t in pl ac e. u Posit ion t h e Rewi n d R et ain er li ght ly a g ai n st th e ed g e o f th e media on th e M edia R [...]
-
Seite 36
26 I -Cla ss 3. 5. 2 On- Dem an d Di sp en sin g Wh e n eq u i pped w ith t h e Peel an d P rese n t op tion , labels ar e dispen sed t h e n separat ed au t o m a t icall y fro m t h e l in er f or i m m ediate application . n W i th th e Peel an d Present M ec h an is m i n st a lled o n th e pri n t er, pu ll outwar d on t h e L a t c h an d all[...]
-
Seite 37
I- C l a s s 27 r I f i n st alled , rem ov e th e M ed ia C lip an d th e R ewin d R et a i n er f ro m th e M edia Rewi n d Hu b. Ro ut e t h e B ac k i ng Ma teri al ar ou n d th e M e di a Rewi n d Hu b, as s h own . s In ser t t h e leadi ng ed g e int o a Slot on th e M edia Rewin d Hu b th en i n sert th e M edia Cli p in t o a Slot t o sec [...]
-
Seite 38
28 I -Cla ss 3. 5. 3 Cu t t i n g Wh e n eq u i pped with a C u t t er, cut labels ar e di spen sed au t o mat i call y fro m th e pri n t er. To l oad m edi a on a c u t ter equ ipped pr i n t er n En s u re th e leading ed g e of media is cl ean , straig ht a n d fir m l y at t ac h ed to th e lin er. o L oad m edia accor din g to S ec t ion 3.1,[...]
-
Seite 39
I- C l a s s 29 Using t he Fr ont Panel 4 .0 Ope r a t ion T h e f ro n t pan el is c om pris ed of th ree in dic a t or lig h t s, a L iq u id C ry s t al D ispla y an d f i ve m ode- depe n da n t k e y s . T h e s el ectable m odes (Read y , M enu a n d Q u ick Test) an d t h e rel a t ed f un c tion s o f th e pri n t er k e y s a re de tail ed[...]
-
Seite 40
30 I -Cla ss 4. 0. 2 M en u M od e: C o n f igu ratio n (R ea dy Li g h t ‘ F l as h i ng’ ) n The DO WN AR R O W Ke y s c r o l l s to th e pr e vi ous me n u i t e m o n t h e s a me me n u l e v e l . I t a l s o decrem e n ts num er ical valu es in m os t m e nu selection s. o The UP AR RO W Key sc r ol l s to t he n e xt m e n u ite m . It[...]
-
Seite 41
I- C l a s s 31 4. 0. 3 Qui ck Test M o d e: Pri n t T est La be ls ; Note: The Qui ck Test M ode funct i ons are d i sab l ed wh il e process i ng data from communi cat i ons i nterfaces unt il the Host T i meout va l ue exp i res. n The DO W N ARR O W Ke y sc r ol l s to th e pr ev i ous te s t f u nc ti o n. o The UP AR RO W Ke y s c r o l l s t[...]
-
Seite 42
32 I -Cla ss 4 .0 .4 Indic a t or L ights n ‘On ’ in dicat es th a t th e printer is power ed ‘On ’ an d, aft er in it ia liz at io n , it in dic at es th e Re ad y M ode. ‘Sl ow F l as h ing ’ i n di ca t es Me nu M ode. ‘Fast Flash ing ’ in di cat es dat a is being recei ved an d proces sed. o ‘On ’ in dicat es a ‘Pau sed’[...]
-
Seite 43
I- C l a s s 33 4. 0. 6 Resett i n g th e P ri n t er D epen di ng u po n t h e m eth od u sed, th er e are t h ree r eset levels po ssib le: 4.0.6.1 S oft Rese t To rese t t h e pri n t er a n d clea r an y te m porar y h ost set ting s : W ith th e pr in t er ‘On ’, pre ss an d h old th e C AN CEL K ey f or ap p rox i m at el y f o u r secon [...]
-
Seite 44
34 I -Cla ss 4 .1 The Me nu S y s te m Pri n t er oper ation ca n be control le d t h r o ugh t h e u ser i nt er f ace, al low i n g th e operat or access to t h ese si x m e nu s y st e m bran c h es: M edia Set t i ng s Pri n t C o ntrol Pr i nte r Opti o ns Sy ste m Set ti ng s C o m m u ni c a t i o ns Di a g nos ti cs Wh ile in th e m e nu s [...]
-
Seite 45
I- C l a s s 35 4 .1 .1 Ent r a nc e a nd E x it P r ompt s W it h ‘ Read y ’ di spl ay ed on th e L CD , pres s t h e K ey t o e n ter Me nu M ode. ; Note: Whil e i n M enu M ode, the pr i nter w ill stop process i ng new DPL (or bi tmapped) data. M ENU M O DE D e p e nd i n g up o n t he c o n f i g ur a ti o n o f t he pr in t er, th e f oll[...]
-
Seite 46
36 I -Cla ss 4. 1. 2 M ed i a S ett in g s M EDI A T YPE Sele cts t h e pr i nting meth od. DI RECT T HERMA L F o r us e w i t h he a t s e ns i t i v e me d i a . T HERMA L T RA NSFER For u se w i th m edi a r equ ir i ng a ri bbon t o create an i m a g e. SENSO R T YPE Sele cts t h e top-of -f or m (T O F) sen si ng m e t h od f or t h e m ed[...]
-
Seite 47
I- C l a s s 37 4. 1. 3 P ri n t Co n t ro l ☞ Refer to Secti on 2.1.1 for deta il ed i nformat i on on pr i nt qua li ty contro l s. HE A T 10 (0- 30) Cont rols th e ‘b u r n - t i m e’ of t h e pri n th ead. T h i s is t h e equ iva len t of H eat S e tt ing o n m ost lab e l soft w a re pr og ra m s . PRI NT SPEED Cont rols t h e r ate[...]
-
Seite 48
38 I -Cla ss Pri nt Cont rol ( conti nued) CUST O M A DJ UST M ENT S Th ese f ac t ory adj u s t me n ts in depe n de nt l y ch a ng e th e lis t ed p ar am e t ers t o f i n ely tu n e th e p r i nter a nd c o mp ens a te fo r s l i g h t me c ha n i ca l dif f ere n ces s om e t i m es e v ide n t if m ult iple pri n t ers sh are l abe l form ats[...]
-
Seite 49
I- C l a s s 39 4. 1. 4 P ri n t er Opt i o n s M O DULES M e m or y avai lable f or u ser storag e of g r ap h i cs , f onts a n d labe l form a t s. (Th e phy sical presen ce of th e respect i ve m e m ory mo d ul e must b e de te c te d to s how t he fu n ct io n s ele ct ion s in th e m e nu s y st e m . S ee Appen di x C f or a l is tin g o f [...]
-
Seite 50
40 I -Cla ss Pri nter O pti ons ( conti nued) C U TTE R U s e d to c ut me d i a i nto s e p a r a te l ab e l s . (Th e p hy si cal pre sen ce of a device mu s t be det ect ed t o s h ow th e ENABLE/D I S A B LE selection s.) ENA BLED En ables cut t i ng . DI S A BLED Dis abl es cu t t ing . NOT I NST A LLED N o Cu tter is det ect ed. SC ANNE [...]
-
Seite 51
I- C l a s s 41 Pri nter O pti ons ( conti nued) BA RCODE COUNT 00 (00-99) U sed to se t t h e speci fic number of barcodes t o be r ead on th e l abe l. 00 sel ects AUT O M ode, al low i n g a va ri abl e n um be r o f barc odes to be rea d pe r la be l f orm a t . A U T O M ode s h o u l d n ot be u sed wi th im a g ed (bi t m a pped) barc od[...]
-
Seite 52
42 I -Cla ss Pri nter O pti ons ( conti nued) GP I O P OR T M odel de pen da n t op tio n u s ed to i nterf ace th e pr in t er to a n e xt ern al controll i n g devi ce (s ee Appen di x D). GPI O DE VI CE In p u t cont rol s ig n al is req u ired t o p rin t a lab el. DI S A BLED Disables th e GP I O . A PPL I C A T OR En ables t h e GPIO f or[...]
-
Seite 53
I- C l a s s 43 4. 1. 5 Syst em Set t i n g s CO NF IG U R A T IO N FIL E Opt i o n s f or s t ora g e an d r ec al l of pri n ter co n f igu rat io n f iles. S ee A ppe n di x F f o r de t ails. REST ORE A S CURRENT P ro vid e s a list o f av aila b le c o n f igu rat io n f iles. Se lec t in g a f ile f ro m th e lis t cau ses a p r i nter r e s [...]
-
Seite 54
44 I -Cla ss System Setti ngs ( conti nued) DO UBL E B YT E SYM BO LS Wh e n eq u i pped w i th t h e I L PC op t io n , t h i s sel ects th e code pa g e u sed to pri n t do u bl e byt e f o nts un l ess ot h e rw i se specif ied i n D P L ; see th e I & W C lass Prog r a m m er’ s M a nu al f or detail s . UNI CODE Un i code ( i n clu d[...]
-
Seite 55
I- C l a s s 45 System Setti ngs ( conti nued) CO NF IG U R A T IO N LEV EL T o u p g rade th e appli cat ion pro g ra m (resid en t soft ware) ve rs ion of th e p rin t er, th e h ard war e a n d s o ft ware c om pa t ibilit y le vel s m u s t m a t ch for th e u pda t e t o be accept ed. Th is i nf or m at io n i s display ed h ere ; it is a lso [...]
-
Seite 56
46 I -Cla ss System Set tings ( conti nued) SET FACT O RY DEF AULT S P ara m e t ers in th is m e n u list ing wit h th e ‘ ’ s y m bol ar e t h e desi gn a ted def a u l t s. SET FA CT ORY DEFA ULT S O v er writ e t h e cu rre n t se tt ing s with th e f actor y def a u l t setting s or, i f sele cted, wi l l rest ore t h e Fact or y Sett [...]
-
Seite 57
I- C l a s s 47 System Setti ngs ( conti nued) P A U SE M O DE Wh e n e n able d, su spen ds pr i nting be t w een each l abel u ntil th e PAUS E K e y is pressed. ENA BLED Requ ir es an oper ator pres s th e P A U SE Ke y af t er each l abel. DI S A BLED Th e prin t er c o m ple t es la be l bat ch wit h o ut pau sing be t wee n l a bel s. PEE[...]
-
Seite 58
48 I -Cla ss System Setti ngs ( conti nued) ; Note: As i nd i cated, the fo ll ow i ng menu se l ect i ons w ill on l y appear accordi ng to the mode l of your pr i nter. PLUS EM U L A T IO N T h is in st r u c t s th e f ir m ware t o p ro ce ss specif ic D PL dat a as wou l d th e P r o d i gy P l us ® prin t er wit h o u t all o f th e variatio[...]
-
Seite 59
I- C l a s s 49 System Setti ngs ( conti nued) ; Note: As i nd i cted, the fo ll ow i ng menu se l ect i ons w ill on l y appear accord i ng to the model of your pr i nter. A L LE GRO E MU LA T I ON T h is in st r u c t s th e f ir m ware t o pro ce ss specif ic DP L dat a as w ou l d t h e A lle g ro ® pr in t er wit h o u t all of th e vari atio[...]
-
Seite 60
50 I -Cla ss System Setti ngs ( conti nued) CO L UM N EM UL A T IO N P ro v ide s c o m pa t ibilit y wit h le g ac y Dat a m a x pr od u cts. T h e Prodi gy Pl u s a n d A lle g ro ca lcu lat ed c o lum n p os it io n s u si ng 200 DPI m ath b ut h a d 203 DPI pri nth eads. A lso, decreasin g t h e DPI co m pe n sat es fo r diff erent pr inter m o[...]
-
Seite 61
I- C l a s s 51 System Setti ngs ( conti nued) M ENU L ANG U A G E Selects t h e la ngu ag e i n w h i c h th e me nu sy st e m m essag es a n d co nf igu r at io n label are sh own . On l y langu a g es th a t are residen t w ill be a va il ab le. ENGLI SH En g lish FRA NC AI S Fr e n c h IT AL I AN O I t alian DEUT SCH Ge r m an ESPA NOL Sp a[...]
-
Seite 62
52 I -Cla ss System Setti ngs ( conti nued) VO ID D IS T AN C E 0.25in (0-2.00) Th e dist a n ce t o b ac ku p o n th e de f ect ive lab el a n d t h e f o n t si z e in wh ic h t o pr i n t th e VOI D t e xt . RET RY COUN T 1 (0-3) E st ab lish es th e nu m ber o f ret ries th e p rin t e r w i ll a tte m p t to r e p r i nt a d e fe c ti [...]
-
Seite 63
I- C l a s s 53 4. 1. 6 Co mmu ni cati o n s SER I A L PO RT A C ont rol s th e c o mm unica tio n s sett i ng s for Ser i al Port A . BA UD R A T E Det er m i n es t h e ser ial com m un ication rat e. 38400 38400 bits per secon d 28800 28800 bits per secon d 19200 19200 bits per secon d 9600 9600 bits per secon d 4800 4800 bits per secon d 24[...]
-
Seite 64
54 I -Cla ss Comm uni cati ons ( continued) P A RALLE L PORT A Cont r ol s th e c o mm unica t i o n s se t ti ng s for P ara lle l P or t A. PORT DI RECT I ON D et er m i n es i f m essag es are sent f ro m t h e pr in t er t o th e h ost via th e pa ra lle l po rt . UNI -D I RECT I ON A L On e - w a y p r i n te r co mmu ni c a ti o n. BI -D [...]
-
Seite 65
I- C l a s s 55 Comm uni cati ons ( continued) GA T EWA Y S p e c i f i e s the ne t w o r k ga t e w a y a d d r e s s the NIC Ad a p te r s ho ul d use . SNMPT RA P DEST I NA T I ON Select s t h e Net work I P add ress w h ere al l SN M P T ra ps wi ll be se n t. If z er oed, n o t raps are sen t. PROT OCOL Th e n e t wor k protocols r ecog n i z[...]
-
Seite 66
56 I -Cla ss Comm uni cati ons ( continued) HO ST SETT INGS Se tti n gs w hi c h a f fe ct a l l c o mmu ni c a ti ons wit h a h ost . HOST T I MEOUT 10 SEC (1-60) Th e number of secon ds a co m m unic ation s port m u st be i dl e before t h e pri n t er m a y proce ss da t a from a dif ferent port. T h i s valu e i s al so u sed t o “t i m [...]
-
Seite 67
I- C l a s s 57 Comm uni cati ons ( continued) HEA T COMMA ND A ll ows th e u ser t o disable th e DPL Hea t C om m a n d, p ro vid in g co m p at ibilit y wit h ot h e r DAT AM AX p r i n ter s . ENA BLED Nor m a l pr i n t er oper ating m ode. DI S A BLED DP L He a t Co mma nds a r e i gnor ed . The h eat v al u e i s con trolled via t h e m [...]
-
Seite 68
58 I -Cla ss 4 .1 .7 D ia gnost ic s H E X D U MP MOD E Mo s t c o m mo nl y us e d fo r tr o ub l e s ho o t i n g. P rin t s da t a a n d in s t ru c t io n s rec eiv ed f ro m th e h os t rath er th a n int erp ret ing th e m as la bel f orm ats ; see Section 6.2. ENA BLE Pri n ts raw A SC II dat a received f ro m th e h ost rat h er th an e x e[...]
-
Seite 69
I- C l a s s 59 Diagnosti cs ( conti nued) SENSO R R E ADI NG S An al o g Se n s or r eadi n g s a re dis pl ay ed. T H R T R A N RI BM 24V Æ 255 255 255 255 L i ve se n s or va lu es a re di s pla y e d. V i ew can be t o gg le d w i t h t h e FO RWARD an d REV E RS E Ke y s. M a x i mum val u e s ar e sh own i n th is e x a m pl e: t h e r m is [...]
-
Seite 70
60 I -Cla ss 4. 2 Di sp l ay Messag es T h e pr int er dis p lay s s ev er al d if f ere n t ty pe s o f i nf or m at io n (if n ot i n th e m e nu sy st e m or Q u ick Tes t M ode ): ¾ U ser Pro m p t s an d Co n dition M essa g e s ( al so s ee Section 4.1.1 f or a l i sting of th e E nter/ Ex i t Pro mpt s) ¾ Applic ation a n d Boot L oa der U[...]
-
Seite 71
I- C l a s s 61 Use r Pr o mpts and Co ndi tio n M e ssa g e s (conti nued ) Di s p l aye d M e ss age De s c ri ptio n C o n ditio n( s ) SFBE Z Ready Mode. Nor m al oper ating m ode. Th e printer is ready t o rec ei ve an d proces s la be l fo r m a ts . SFNP WF! MBC FM A la be l is a wa it ing rem oval . Th e Pr esent Se n sor opt io n is en abl[...]
-
Seite 72
62 I -Cla ss 4. 3 Q u i ck T est Mo d e Th i s section e x plain s t h e fun ctio n s of th e resi den t Qu ick Test s, accessible by pres si n g t h e Key o n t h e Fro n t Pa n el. ; Notes: (1) Wi th the except i on of the Conf i gurat i on Labe l , a ll Qu i ck Test l abe l s requ i re 4- i nch (102mm) w i de med i a to pr i nt the ent i re form[...]
-
Seite 73
I- C l a s s 63 4 .3 .2 C onfigur a tio n La be l Th e Co nf i gu ration L abel provi des pr in t er va lu able da t ab as e in f or m a t ion , as detail ed i n Section 4.1. T o prin t a C onf igu ra t ion L ab el: n Pres s th e Ke y. o U se th e Ke y t o scr ol l to ‘ P r i nt C o n fi g ur a t i o n’ . p Pres s th e Ke y to pri n t. ; Note: [...]
-
Seite 74
64 I -Cla ss 4 .3 .3 Q uick Ribbon Tes t La be l Th e Q u ick R ibbo n Tes t L abel fea t u res a com pl ia nt pic k e t-f e n ce ba r c ode t h a t ca n b e u sed t o v er ify th erm al t ra n sf er an d prin t q u ality fun ct io n s. T o prin t a Qu ic k R i bbo n Test L abel : n Pres s th e Ke y. o U se th e Ke y t o scr ol l to ‘Ribbon Test [...]
-
Seite 75
I- C l a s s 65 4. 3. 4 Do t T est P at tern Lab el Th e D ot Tes t Patt ern L abel fea tu res pat t er n s th at e x er cise th e t h er m al el em e nt s of th e pri nt h ead to i n dic ate its overal l con dition (se e ex a m pl es bel ow ). To pr i n t a D o t T e st Pa tt ern L abe l: n Pres s th e Ke y. o U se th e Ke y t o scr ol l to ‘Dot[...]
-
Seite 76
66 I -Cla ss 4. 3. 5 Val i d ati o n Lab el T h e V alida t io n L ab el is a n o th er u se fu l t ool f or ev a lu at i n g o ve ra ll prin t q u ality . T o g e n era t e a V alida t ion L ab e l: n Pres s th e Ke y. o U se th e Ke y t o scr ol l to ‘ V a li da t ion L abel ’. p U se th e Ke y t o sel ect a q u a n tit y; see Section 4.0.3. [...]
-
Seite 77
I- C l a s s 67 Adj us ti ng and M a in t a inin g th e P r in te r 5 .0 Me dia Se ns or C alibr at ion In addi tion t o t h e Se n sor T y pe sel ection , Media Sen sor c al ibr ation en s u res t h a t each label i s det ect ed corre ct l y an d reli ably . Pe rfo r m cal ibration w h e n t h e ‘Un ca li br ated’ m ess ag e is dis pl ay ed. T[...]
-
Seite 78
68 I -Cla ss Standar d Cali bra ti on (cont inued) Ste p O p e r ator A c t io n D i s p l aye d M e ss age Co mm e n t 3 Pres s th e Ke y to e n te r t he Me d i a Set t i ng s m e nu . NFEJ B!T FUU JOH T NFEJ B!U ZQF ! See Section 4.1.2 f or m e nu la y o ut. 4 Pres s th e Ke y an d scro ll t o ‘S en sor C alibra t i on ’. NFEJ B!T FUU JOH T [...]
-
Seite 79
I- C l a s s 69 Standar d Cali bra ti on (cont inued) Ste p O p e r ator A c t io n D i s p l aye d M e ss age Co mm e n t 7 Proceed accord in g t o y o u r m edia t y pe: Die - c ut s t o c k : stri p th e m e di a f ro m t h e bac k i ng an d th e n rein se rt it i nt o th e sen sor; adj u st th e Sen s or E y e Mar k over th e cent er of th e ba[...]
-
Seite 80
70 I -Cla ss Standar d Cali bra ti on (cont inued) Ste p O p e r ator A c t io n D i s p l aye d M e ss age Co mm e n t 9 O bserve t h e display . HBQ! NPE F DBMJ CSB UJP O!D PNQ MFU F O r, for ref lective m edia : SFGM FDU JWF !NP EF! DBMJ CSB UJP O!D PNQ MFU F Or, for c onti nuou s media: ! DPOU JOV PVT !NP EF! DBMJ CSB UJP O!D PNQ MFU F Th e cal[...]
-
Seite 81
I- C l a s s 71 5. 0. 2 Ad van ced E n t ry Cal i b rati o n A dvan ced E ntr y Calibration is th e alter n ate meth od fo r special - case m edia ty pes. Th e proced u re h as two par ts: 1) Y o u m u st list th e sen sor r ea din g s f o r th e la b el an d TO F va l u es u si n g diff erent alg ori t hm s. 2) F r o m yo ur l i s t t he b e s t a[...]
-
Seite 82
72 I -Cla ss A dvance d Entry Cali brat i on ( continued) Ste p O p e r ator A c t io n D i s p l aye d M e ss age Co mm e n t 6 Pres s th e Ke y t o scr ol l t o ‘Advan c ed Entry’. TFOT PS! DBM JCS BUJ PO BEWB ODF E!F OUS Z Y ou are e n tering Advan ced E nt r y C a libra t ion . 7 Pres s th e Ke y. BEWB ODF E!F OUS Z TFOT PS! MFW FMT ! Press[...]
-
Seite 83
I- C l a s s 73 A dvance d Entry Cali brat i on ( continued) Ste p O p e r ator A c t io n D i s p l aye d M e ss age Co mm e n t 11 Proceed accord in g t o y o u r m edia t y pe: Die - c ut s t o c k : stri p th e m e di a f ro m t h e bac k i ng an d th e n rein se rt it i nt o th e sen sor; adj u st th e Sen s or E y e Mar k over th e cent er of[...]
-
Seite 84
74 I -Cla ss A dvance d Entry Cali brat i on ( continued) Ste p O p e r ator A c t io n Di s p l aye d M e ss age Co mm e nt 12 From th e dat a coll ected in St eps 10 an d 11, w h ere both th e se n sor r eadi n g s are above 20, su btract eac h L abe l V alu e f ro m th e corr es pon di n g TOF V alu e. Th ese are th e Di ffe r e n c e Val u e s [...]
-
Seite 85
I- C l a s s 75 A dvance d Entry Cali brat i on ( continued) Ste p O p e r ator A c t io n Di s p l aye d M e ss age Co mm e nt 13 U si ng th e Ke y, select t h e G ai n N um ber deter m i n ed i n St e p 12. Pres s th e Key to select t h e sett ing . HBJO !US BO! !!! !!= zzz ? +19! !!! !!! !!) 1!. !42 * O r, for ref lective m edia : HBJO !SF GM! ![...]
-
Seite 86
76 I -Cla ss A dvance d Entry Cali brat i on ( continued) Ste p O p e r ator A c t io n Di s p l aye d M e ss age Co mm e nt 16 Pres s th e Key. U si ng th e or t h e Ke y , se t th e ‘P ap e r’ lev el t o t h e v alu e deter m i n ed i n th e previ ou s step. Press t h e Ke y t o set t h e e nt ry ( i n di cat ed by th e ‘ * ’ ) an d adv a[...]
-
Seite 87
I- C l a s s 77 5. 1 Pri nt h ead Ad just m ent s T o en s u re co n sist e n t p ri n t q u ality ov er a wid e ran g e o f m ed ia ty pes an d dim e n sion s, t h e pr i n t er i s e qu i pped w i th a L evel i ng C a m adju s tm e nt an d a B u r n Li ne a d j us t m e nt . 5. 1. 1 L evel i n g Cam Ad ju stmen t Wh e n prin t ing on less th a n [...]
-
Seite 88
78 I -Cla ss 5 .1 .2 B ur n Line A d jus tm ent Th e B u r n L i n e h as be en adj u sted at th e fac tory for strict co m pl i an ce u si ng 6.5- m i l ( .0065 i n c h ) m edi a, e n s u ri ng pri nt q u al i ty acr oss a m aj or i t y o f m edi a ty pes. In e x tre m e ca ses , h ow ever, i f m edia of a di fferent th ic kn e ss or r ig idi ty i[...]
-
Seite 89
I- C l a s s 79 5. 2 Pri nt h ead Rep l acem ent ; Note: Pri ntheads are frag il e; use extreme care when hand li ng and never use a sharp object on the surface. If you have questi ons, contact a quali f i ed techn i c i an or Datamax Techn i cal Support before proceed i ng. To replace t h e pri n t h ead: n Tou c h a bare m et al part o f th e pri[...]
-
Seite 90
80 I -Cla ss 5. 3 Mai nten ance S ch ed u l e Th e foll ow in g l is t an d t able de tail t h e rec o m m e n de d i t e m s, tec hn iqu es, a n d s c he d ul e s to he l p yo u s a fe l y a nd e f fe c ti v e l y ma i nt a i n t he p r i nt e r . I sopropy l al c oh ol Co tto n s w a b s A clean , l in t - free clot h Sof t-br is tle br u s h Soa[...]
-
Seite 91
I- C l a s s 81 5. 3. 1 Cl ean i n g th e P rin th ead I f pri n t qu ality dec lin es (sy m p t o m s i n clu de n o n -com plian t ba r co d es , p rin t dropou t s, strea k s; see Sec t io n 4.3.4), t h e ty pic al cau s e is de bri s bu il d- u p on t h e pri n th ead. F u rt h er m ore, w h e n t h e b u i l d-u p is n o t re m oved i t m a y [...]
-
Seite 92
82 I -Cla ss 5. 3. 2 Cl ean i n g t h e Plat en Ro ll er A pl at en roll er con t a m i n ated wit h g rit, label adh esive, or in k can ca u se a decli n e in pr in t q u ality a n d, in e x t re m e ca ses , ca u se lab els t o st ick an d wra p arou n d th e roll e r. To clean t h e plate n rol ler : n Tu r n ‘O ff ’ a n d un pl ug t h e pri[...]
-
Seite 93
I- C l a s s 83 5. 3. 3 Cl ean i n g In t eri o r an d E xt eri o r S u rf aces I nt e ri o r S u rf a c e s : Du ri n g oper atio n , d u s t part ic le s fro m t h e media bu i l d-u p in sid e t h e p rin t er. Th e n , as th e m ed ia is pu lled t h ro ug h th e p rin t er, th e par t icles can bec o m e at t ac h e d a n d c a u se voids on t [...]
-
Seite 94
84 I -Cla ss 5. 4. 1 Up d at i n g fro m the Read y M od e U pd at e Pr oce d ur e for Appli c at i o n Ve r sio n 2.091 o r g r e ate r Ste p Di s p laye d Me ss age O p e r ator A ct i o n C o m m e n t(s) 1 ! SFBE Z U s i n g t h e DOS copy co mm a n d (wh ere ‘f ilen am e’ is th e prog ra m t o be loa ded an d ‘l pt1’ is th e select ed [...]
-
Seite 95
I- C l a s s 85 5 .4 .2 U pda t ing fr om t he D own loa d Mode Re qu i r e d U pdate Pr oce d ur e for Appli cat i o n V e r s i o n 2.08 o r e ar lie r * Ste p Di s p laye d Me ss age Op e rator Act io n C om m e n t(s) 1 CPPU .QB 21 13/1 9!3 022 011 P res s a n d h old th e PA U SE a n d T EST K e y s w h ile t u r n in g ‘O n ’ th e pr int [...]
-
Seite 96
86 I -Cla ss 5. 4. 3 Po ssi b l e Pro b l ems d u rin g an Up d at e Th e f oll ow i n g i s l i st of possi ble e rror m ess ag es w h e n dow n l oadi ng : ; Note: If experi enc i ng troub l e when attempt i ng to down l oad the f il e to the pri nter, try the fo ll ow i ng a l ternate methods: 1) Use the Downl oad M ode (see Sect i on 5.4.2). 2)[...]
-
Seite 97
I- C l a s s 87 5 .5 Boot Loa der Pr ogr a m U pdat e s Th e print er sto res t h e Boo t Lo ader P rog r a m in Flash m e m or y o n t h e M ain P CB . A f eatu r e all ows u pdat es to th is prog ra m vi a th e pri n t er’s in terf ace port . U pdat es can be f o un d a t f tp:/ /ftp.datam a x c orp.com . W ARN ING I f power is lost while ‘Up[...]
-
Seite 98
88 I -Cla ss[...]
-
Seite 99
I- C l a s s 89 T r oubl eshoot i ng 6. 0 Pro bl em Resol utio n S h o u ld a pro blem aris e, th e inf or m at io n in th is se ct ion will h elp y ou reso lv e it . T h e f ollo win g t a ble list s p ro ble m s th at will n ot n ece ssa rily g e n era t e an erro r m e ssa g e. (For in f or m atio n o n di spl ay ed m es sag es, s ee Section 6.1[...]
-
Seite 100
90 I -Cla ss If e x pe ri e nc i ng t h i s pro b le m… Tr y t his solu tio n … Erra t i c pri n t ing (i n stead o f th e label f orm at, s t rang e c h aracters are pri n t ed): Th e pr i nt er m a y be in He x D ump M ode ; see Sec t i on 6.2. I f u si ng th e serial port f or com mun ica t ing , ch ec k bot h th e h os t a n d pri nt er por[...]
-
Seite 101
I- C l a s s 91 If e x pe ri e nc i ng t h i s pro b le m… Tr y t his solu tio n … No power (all i n di ca t or l i g hts are ‘Of f”): V er if y th at t h e AC power cord conn ectio n h as been m ade at bo t h t h e o ut l et a n d th e pri n t er; als o, en s u re t h e pow er switch is ‘O n ’. V erify th at th e A C o ut let is fu n c[...]
-
Seite 102
92 I -Cla ss If e x pe ri e nc i ng t h i s pro b le m… Tr y t his sol u t io n … N o t hi n g ha p p e ns w he n t r yi n g to p r i nt usi n g a s o f tw ar e prog ra m : E n s u re th a t th e p rin t er is a t RE A DY . O b se rv e t h e F ron t Pa n el, if th e R EAD Y l i gh t d o e s no t fl a s h a s yo u s e nd t he f o r ma t ch ec k [...]
-
Seite 103
I- C l a s s 93 6. 1 F au l t an d W arn i n g M essag es All pri n t er fun ct i o n s are in t er n a ll y mo n itored. I f a probl em ( Fa u l t) or a pote n t ia l probl em (W ar n i ng ) is de t ected, t h e Err or I n di ca t or ( see Section 4.0.4) w ill be illu m i n at e d. A c orr es po n din g m ess a g e will b e d isp l ay ed (if n o t[...]
-
Seite 104
94 I -Cla ss Pr in te r F a ul t M e ssag e s (cont inued) Di s p l aye d M e ss age De s c ri p t io n Po ss ibl e Sol u tio n ( s) ENB! GBV MU Th e pr i nt er h a s det ect ed a D i rect M e m or y Access f ailu re. T ry c y cling th e p rin t er po wer ‘Of f ’ a n d ‘ O n ’. If t h e f a u lt does n ot clear, call f or service. HBQ! NPE [...]
-
Seite 105
I- C l a s s 95 Pr in te r F a ul t M e ssag e s (cont inued) Di s p l aye d M e ss age De s c ri p t io n Po ss ibl e Sol u tio n ( s) QPTJ UJP O!G BVM U Two pos si b le cau ses: (1) T h e prin t er was pow ere d-off or res et du ri ng a ri bbon , out of s toc k or TOF f a u lt ; or (2) th e p rin t er was un a ble t o co m pl ete th e M edi a C a[...]
-
Seite 106
96 I -Cla ss Pr in te r F a ul t M e ssag e s (cont inued) Di s p l aye d M e ss age De s c ri p t io n Po ss ibl e Sol u tio n ( s) SFGM FDU JWF !NP EF GBVM UZ! TFO TPS C o ns i s te nt l y hi g h s e ns o r r e a d i ngs wer e det ect ed. P r e s s a ny ke y t o c o n t i n ue . En s u re t h a t m edi a w as rem oved fro m th e m edi a sen sor d[...]
-
Seite 107
I- C l a s s 97 Pr in te r F a ul t M e ssag e s (cont inued) Di s p l aye d M e ss age De s c ri p t io n Po ss ibl e Sol u tio n ( s) TDBO OFS !GB VMU Th e Sca nn er cou ld n o t su ccessfu ll y pass a bar code. ; Note: T h is is a n o r m a l c o n d it io n when a bar code i s not readabl e. Press t h e FE E D K e y t o clear. I f t h e bar c o[...]
-
Seite 108
98 I -Cla ss Pr in te r F a ul t M e ssag e s (cont inued) Di s p l aye d M e ss age De s c ri p t io n Po ss ibl e Sol u tio n ( s) UPQ! PG! GPS N!G BVM U Th e printer cou ld no t fi nd t he T O F m ar k with in th e m a xi mu m l a be l len gth sett ing or it f o un d a TO F i n a n un e x pect ed place. ; Note: When the pri nter i s set for refl[...]
-
Seite 109
I- C l a s s 99 Pr in te r F a ul t M e ssag e s (cont inued) Di s p l aye d M e ss age De s c ri p t io n Po ss ibl e Sol u tio n ( s) WFSJ GJF S!G BVM U Th e V er ifier cou ld n o t su ccessfu ll y pass a bar code. ; Note: T h is is a n o r m a l c o n d it io n when a bar code i s not veri f i ab l e. S im u lt a n eou sly pre ss th e ENTER a n [...]
-
Seite 110
100 I -Cla ss P rin te r W a rn in g M e ss ag e s Di s p l aye d M e ss age De s c ri ptio n Ac ti on (s) MPX! WPM UBH F Th e pr i nt er h a s det ect ed a low opera t i ng vol ta g e. P o s s i b l e l o w or f l uc t ua ti n g li n e vol t ag e leve l. Tr y m oving th e pri n t er to an oth er o ut le t . Wh e n more th an 50% bl ack is be i ng [...]
-
Seite 111
I -Cla ss 101 6. 2 Hex Du m p M o d e Th e Hex D um p Mode is a u s e fu l tool for diagn osi ng probl e m s, i n cl u ding comm uni ca t i on a n d DP L s yn ta x er r ors , a ll o wi n g a c o m par i son of i n p ut stri ng s (sen t b y h ost ) t o o ut p ut dat a (received by pri n ter). To decode th is in f or m a t ion , th e I & W Class [...]
-
Seite 112
102 I -Cla ss[...]
-
Seite 113
I -Cla ss 103 Pr i nt er S pecifications 7. 0 G en eral Sp ecif i cati on s Bar Co d es (See t h e I &W C las s Progr amm er’s Manual f or det ail s . See Appen di x B for sam ples.) Code 39, In t erl eaved 2 of 5, C ode 128 ( su bse t s A, B a n d C), Codabar, LO GMARS, U P C-A, U P C-E, U PC 2 & 5 di g i t adden d ums, EAN-8, EA N-13, E[...]
-
Seite 114
104 I -Cla ss Env ironm ent a l R e quir em e nts O perat ing T e mperatu r e: 32 F – 100 F ( 0 C t o 38 C) St or ag e Te mperatu r e: 0° F 140° F (-17° C to 60° C ) H u m idity : 10% 95% n on -co n de n si ng D us t : N o n- c o nd uc ti n g, no n- c o r r o s i v e Electrom a gn e tic Radia t ion : Moderate RF fiel ds c an be t oler ated M [...]
-
Seite 115
I -Cla ss 105 Pri nti ng Speci fic ations ( conti nued) Pri n t L e ngth Ra ng e: wi th an op t io n al cu t t er: wi th an op t io n al peel & presen t m ec h a n i s m : .25” – 99” ( 6.4 m m – 2514.6 m m ) I -4206, I -4208, I- 4212, I–4308 .25” – 84” ( 6.4 m m – 2133.6 m m ) I -4406 .25” – 55” ( 6.4 m m – 1397 m m ) [...]
-
Seite 116
106 I -Cla ss Medi a and Ribbon Requi rem ents ( continued) E A B C D G H I J F Me di a D i me ns io ns De sign ator De s c ri ptio n M aximu m [1 ] Mi n i mu m [1 ] A l abel w i dth 4.65 1.00 B l i n e r w i dth 4.65 1.00 C g ap (or n o tc h ) between l abel s [4] – .100 D label len gth [4 ] – .250 E m ed ia th ic kn ess [2 ] .0100 .0025 F n o[...]
-
Seite 117
I -Cla ss 107 Appe ndi x A A SCI I Cont ro l Cod e Ch art Char De c He x Ch ar De c He x Char De c He x Ch ar De c He x Ctrl @ NUL 0 00 32 20 @ 64 40 ` 96 60 Ctrl A SOH 1 01 ! 33 21 A 65 41 a 97 61 Ctrl B ST X 2 02 “ 34 22 B 66 42 b 98 62 Ctrl C E XT 3 03 # 35 23 C 67 43 c 99 63 Ctrl D EOT 4 04 $ 36 24 D 68 44 d 100 64 Ctrl E E NQ 5 05 % 37 25 E [...]
-
Seite 118
108 I -Cla ss ASCII Con trol Code Chart (conti nued) Char De c He x Ch ar De c He x Ch ar De c He x Cha r De c He x Ç 128 80 á 160 A 0 192 C0 Ó 224 E0 ü 129 81 í 161 A 1 193 C1 ß 225 E1 é 130 82 ó 162 A 2 194 C2 Ô 226 E 2 â 131 83 ú 163 A 3 195 C3 Ò 227 E 3 ä 132 84 ñ 164 A 4 196 C4 õ 228 E 4 à 133 85 Ñ 165 A 5 197 C5 Õ 229 E 5 å[...]
-
Seite 119
I -Cla ss 109 Appe ndi x B A vail ab le Fon ts an d B ar Co d es A ll ch ar act er f ont s a n d bar codes availab le w i t h t h e pri nt er are descr ibed in t h i s sect ion . E ac h f o nt a n d bar code h as a n a m e associated with i t f or u se in prog ra mm i ng . Huma n -r eadabl e fon ts h ave num er i c n a mes, w h il e bar code f on t[...]
-
Seite 120
110 I -Cla ss Th e t abl e bel ow li sts t h e f o nt si z es; th e num ber s i n dic ate th e number of do t s. Fo nt He ig ht Wid t h Sp ac i n g 075 1 11 37 2 21 8 1 0 2 32 7 1 4 2 43 6 1 8 3 55 2 1 8 3 66 4 3 2 4 73 2 1 5 5 82 8 1 5 5 F o n t 0: 96-ch aract er alph a num er ic, u pper an d l ower case. F o n t 1: 145- ch arac t er u pper a n d [...]
-
Seite 121
I -Cla ss 111 F o n t 4: 62-ch aract er alph a num er ic, u ppercase. F o n t 5: 62-ch aract er alph a num er ic, u ppe rca se. F o n t 6: 62-ch aract er alph a num eri c, u ppercase.[...]
-
Seite 122
112 I -Cla ss F o n t 7: OC R- A, s i ze I. F o n t 8: OC R- B, s i z e III. Fo nt 9 : I ntern al Triumvir ate fo nt. Th e num ber i n t h e bar code h e ight fiel d sets t h e point si z es. L arg er poi nt si z e s ca n be ob tain ed b y i n cre asi n g th e h ei gh t a n d width m u l t ipliers .[...]
-
Seite 123
I -Cla ss 113 Bar Co d e S u mmar y Data Bar Code f o n t s h ave a l ph a n a m es (Bar Code ID ): L owe rca se n am es o n l y pri n t barc odes; u pperca se n a m es pr i n t barc odes w i th hum a n -r eadabl e i n terpr etat io n s . Th e t abl e i s foll owed by vi su al s am ple s. Ba r Co de ID S y mb ology Le ng t h Ch eck - su m Vali d AS[...]
-
Seite 124
114 I -Cla ss Ba r Co d e A: C ode 39 Bar Co de B: U P C-A Ba r Co de C: U P C-E Ba r Co d e D: I nt erl ea ved 2 of 5 Bar Co de E: Code 128 Bar Co de F : EAN-13 Bar Co de G : E AN- 8 Bar Co de H: Health In d u str y Bar Code (HB IC) Bar Co de I: Codabar Bar C o d e J: Int erl eave d 2 of 5 w /m od u l o 10 ch ec k s um[...]
-
Seite 125
I -Cla ss 115 Bar Co de K : Plessey Bar Co de L: Int erl eave d 2 of 5 w /m od u l o 10 ch ec k s um a n d sh ippi ng bearer bar s B a r C o de M: 2 Dig it UPC adde n d um Bar Co d e N: 5 Dig i t U P C adde n d um Bar Co de O : Code 93 B a r C o de p: Post n et Bar Co de Q : U CC/EAN Code 128 Bar Co d e R: UCC /EA N C ode 128 KM ART NO N ED I[...]
-
Seite 126
116 I -Cla ss Bar Co de S: U C C/EAN Code 128 R a n d om W e i g h t Bar Co d e T: Tel epen B a r C o de u: U PS M a x iCode Bar C o d e v: FIM Bar C o d e z: PDF-41 7 Bar Co d e WG: US D - 8 Bar Co de W1c: Da ta Ma tr i x B a r C o de W1 d: Q R C ode Bar Co de W1f : Azt ec Bar Co de W1z : M i cr oPDF417[...]
-
Seite 127
I -Cla ss 117 Appe ndi x C Module As s ign ment s Me m o ry Mo d u le De sign ator Mo dule Si ze Vo la t i le * Lo ca t io n / Us e A F ut u r e Op ti o n N/ A N/ A B F u t ur e Opti o n N/ A N/ A D 1024 KB (def au lt siz e) Yes M a in P CB S DR AM – u ser a ddres sabl e f or g rap h i cs , f o n ts, a n d la bel f or m a ts F 4 M B N o O pt io n[...]
-
Seite 128
118 I -Cla ss A vail ab le Sp eeds an d Defau l t Set ti ng s P r i nt e r S pe e d R a ng e s a n d D e f a ul t s * S p eed R an g e Defau l t S e tti n g Mo de l IP S MM PS IPS MM PS I -4206 : P ri n t 2- 6 51 – 152 6.0 152 Feed 2- 8 51 – 203 6.0 152 Reverse 2- 5 51 – 102 4.0 102 I -4208 :P r i n t 2-8 51 – 203 8.0 203 Feed 2- 8 51 – 2[...]
-
Seite 129
I -Cla ss 119 Appe ndi x D G PI O Port Descri p ti on W ith th e op t io n al G PIO PC B, th e p rin t er ca n ea sily be p rog ram m ed t o i n t e r f ac e wi t h m ost appli cat or devices. Th e G P I O f un ctio n s ar e en abl ed an d co nf igu r ed u s i ng t h e m e nu s y ste m of th e pri nt er (s ee Section 4.1.4). Th e se pa ra m eters a[...]
-
Seite 130
120 I -Cla ss G P IO P i n C o nf i g u ra t i o n (as vi e wed from t h e re ar of th e pri n t er) Exte r n al St ar t of P r i n t Co n t ro l Co nn ec t i on s fo r an e xt er n al St ar t of Pri nt control c an be m ade (1) d i r e c t l y to P i n 8 us i n g a T T L- le vel i n put or ( 2) w i th an in t er f ace circu it si m i lar to th e o[...]
-
Seite 131
I -Cla ss 121 Appe ndi x E Me nu S yst e m M ult i- La ng ua ge Sup por t T h is prin t e r p rov ides t h e u ser wit h th e a b ilit y t o d o w n load n ew m e nu s y st em lan gu a g es a n d/or r eplace t h e Dat a m a x provided t ra n slation s. A M icr osof t Ex cel Sp readsh eet de fin es th e me nu diction ar y – th e u ser adds a n ew [...]
-
Seite 132
122 I -Cla ss Creat i ng a M enu L a ngu a g e: n In vo k e E x cel an d ope n th e g e m ms g lst. x ls f il e. Ex cel open s t h e f il e a n d t h e f ollowi n g screen appears. o Cli ck th e “E n able M acro” box a n d t h e f oll ow i n g appear s:[...]
-
Seite 133
I -Cla ss 123 p Cli ck On Col umn J a n d e n ter y o u r n ew l an gu a g e , or m odif y a n e x i sti ng o n e . Tips: A ) M essag e Si z e – Wh e n e nt ering n ew m essag es, ref eren ce th e ‘ M A X’ co lu m n : th is is t h e m a x i m um n u m ber o f c h ara ct ers allo w ed f o r t h is f ie ld. W arn i ng s a re di s pla y e d w h [...]
-
Seite 134
124 I -Cla ss s D o wn lo ad th e g e n era t ed f iles t o th e p rin t er – on e m eth od is th e D O S co p y c o mma nd: copy small.ls lpt1: /b t Reset th e pri nter by press i ng a n d h oldi ng th e CA NCE L Ke y f or approx i m atel y f o u r secon ds. u V eri f y th e oper ation b y pri nting a C o n f i gu ratio n L abel ( see Sec t i on[...]
-
Seite 135
I -Cla ss 125 y To re store t h e fact or y g e n er ated EF IGS i m a g e, down l oad t h e fil e * 832296.01A t o th e pri n ter. T h is f il e i s loc ated on t h e Dat a ma x FTP si te. Th e l etter at th e e n d o f th e f il e n a m e (e. g ., A ) specifies t h e revisi on . T h e la t est revi si on will be a v a i la ble on th e F TP site. [...]
-
Seite 136
126 I -Cla ss[...]
-
Seite 137
I -Cla ss 127 Appe ndi x F Sa v ing a C onf i gur a t ion Fi le W it h a ppl ic ation ve rs ion 5.01 a n d above , th e pri nter ca n s ave an d res tore c o m pl e te pr i nter s e tti n gs, i n c l udi n g med i a c a l i br a ti o n p a r am e te r s , a s i nter na l Conf i gu r ation Fil es. Here are t h e h i gh l i ghts a n d r estri ction s[...]
-
Seite 138
128 I -Cla ss To sav e a m a nu all y ent ered set u p (for ex a mple, an appli cat ion th at req u i red an A d v a nc e d E n t r y C a l i b r a ti o n b e fo r e b e gi n ni n g) a s a c o nfi g ur a ti o n f i l e us i n g t he f ront pa n el: Ste p Di s p laye d Me ss age Op e rator Act io n C om m e n t(s) 1 ! SFBE Z Press th e Ke y . Y ou a[...]
-
Seite 139
I -Cla ss 129 War r ant y I nfor mat i on Datam ax B arcode Prod uc t s Lim i t ed Wa rran t y St a t em en t I- C l a s s P rint ers Printer D at a m a x war ran t s * t o P u r ch aser th at un der n or m al u se an d ser vice, t h e I-C lass P rin t ers, (wit h th e e x cep t io n o f th e th er m al prin th ead , pla t en ro ller, a n d be lt s[...]
-
Seite 140
130 I -Cla ss The r ma l Pr int he ad, P la t e n R o lle r , a nd Belt s Th i s w ar r an ty* is l i m i t ed to a peri od of o n e y ea r, ( 365 day s), or on e m illio n (1,000,000) lin e ar i n ch es o f u se, w h ich ever co m es f ir s t , for t h e I-Clas s th er m al pri n th ead, platen r ol le r, an d bel ts. T h i s on e y ea r ( 365 day[...]
-
Seite 141
I -Cla ss 131 Ge ne r a l W a rr a nty Pr ov isions D a t a m a x m a k es n o w arra n ty as t o th e d e sig n , c a pa b ilit y , ca p ac ity or su it ab ilit y of a ny of i t s h ar dw ar e, s u ppl i es , or sof twar e. Sof t wa re i s li c en sed on a n “as i s” basi s w ith out w ar ra n t y . E x ce pt a n d t o th e ex t e nt e x pre s[...]
-
Seite 142
132 I -Cla ss[...]
-
Seite 143
I -Cla ss 133 Glo ss a ry al ph a num e ric Co n si sting o f alp h abetic, numeric , pun ct u a tion a n d oth er sym bols . b ack in g m at e r ia l T h e s ilico n -coa t ed pa p er c ar r ier m at e rial t o w h ich labels wi t h adh esive back ing are af f i x ed. A lso ref erred t o as “li n er ”. ba r c o de A re p res en t at ion of alp[...]
-
Seite 144
134 I -Cla ss de f a ult s T h e fun ct i o n al sett i ng val u es retu r n ed f ollow i n g a f ac t ory res et of t h e pri nter. di ag n ostic s Prog r a m s u se d t o l ocate a n d dia gn os e h ar dw ar e pr obl em s. die - cu t m e d i a M edia t h at h as bee n cut i n t o a patt er n u sing a press, w h e re th e e x cess paper is rem ove[...]
-
Seite 145
I -Cla ss 135 la be l A paper or sy nth et i c pri nting mat eri al , ty pi cal l y w i th a pr es su re sen si t ive adh esive back i ng . la be l le ngt h T h e dis tan ce fro m t h e t op o f th e labe l to th e botto m of t h e lab el a s it ex it s th e p rin t er. la be l re pe at Th e di st an ce f ro m t h e t op o f o n e l abel to th e t [...]
-
Seite 146
136 I -Cla ss re g i s t ra t i o n Repeatable top to bott o m ali gnm e nt of pri nted label s . re v e rse s pe e d Th e bac k w ar d ra t e of m e di a m otio n i n t o t h e pri n t er du r i ng t ear- of f , pe el an d prese n t a n d c u t ti ng oper ation s f or posi tion i ng t h e la bel at t h e s tart of pri nt position . r ibbo n A n e [...]