Dell GX1 Bedienungsanleitung

Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/index.htm[2/21/2013 11:52:56 AM] Dell™ OptiPlex™ GX1 Low-Profile Managed PC Systems Reference and Installation Guide Introduction Using The System Setup Program Using the ISA Configuration Utility Working Inside Your Computer Installing System Board Options[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] Back to Contents Page Introduction : Dell™ OptiPlex™ GX1 Low-Profile Managed PC Systems Overview Using the Power Switch System Features Using the Optional Stand for Vertical Orientation Hardware Features ENE[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] the three DIMM sockets on the system board. The system also supports both error checking and correction (ECC) and nonparity DIMMs. See " Adding Memory " for details. Self - Monitoring and Analysis Repo[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] 1024 × 768 True- color (32 bpp) 85 Hz 4 MB 1280 × 1024 True- color (32 bpp) 75 Hz 8 MB 1600 × 1200 65,536 colors (16 bpp) 75 Hz 8 MB 2X AGP provides a dedicated bus from the video subsystem to the system chip[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] The ICU, which tells you how to configure ISA expansion cards manually. After resources have been assigned to these cards, the system BIOS can assign resources to PCI and Plug and Play expansion cards for a conf[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] On systems running Windows 95, Windows 98, and Windows NT 4.0, the Dell OpenManage program is available in client and administrator versions. The Dell OpenManage administrator version enables system administrato[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] on the hour; or you can enable inventory as needed. The Dell OpenManage creates a text file for the group(s) and saves it to a user - defined directory. Support for the application program used to create user - [...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] Auto Power On enables you to turn on the computer system automatically on certain days of the week at a preset time. You can set Auto Power On to turn on the system either every day or every Monday through Frida[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] Passwords The password feature enables you to set a user - defined password to restrict access to the system. Additional protection is available through the System Setup program. When the Setup Password option i[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] Parallel Port Connector The integrated parallel port uses a 25- pin D - subminiature connector on the computer's back panel. This I/O port sends data in parallel format (where 8 data bits, or 1 byte, are se[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] A dual - colored link integrity indicator, which lights up green when there is a good connection between a 10- Mbps network and the NIC, or it lights up orange when there is a good connection between a 100 - Mbp[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] the cable snaps securely into place. Connect the other end of the cable to an RJ45 jack wall plate or to an RJ45 port on a UTP concentrator or hub, depending on your network configuration. Using the Power Switch[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] * Pressing or holding the power button to shut down the system may result in data loss. Use the power button to shut down the system only if the operating system is not responding. Table 4 shows power button fun[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] As you lower the stand into place, make sure that the locator pin (see Figure 4) fits into the corner hole of the hole pattern as shown. When the stand is in place, tighten the thumbscrew. 3 . Rotate the compute[...]

Introduction: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/introduc.htm[2/21/2013 11:52:57 AM] primarily responsible for the greenhouse effect, and sulfur dioxide and nitrogen oxides, which are the two primary causes of acid rain. Computer users can also help to reduce electricity usage and its side effec[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Back to Contents Page Using the System Setup Program : Dell™ OptiPlex™ GX1 Low- Profile Managed PC Systems Overview Using the System Password Feature Entering the System Setup Program Using t[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] 1 . Turn on your system. If your system is already on, shut it down and then turn it on again. 2 . Press <F2> immediately when the F2 = Setup prompt appears in the upper- right corner of th[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Information on the two System Setup screens is organized in five boxed areas: Title box The box at the top of both screens lists the system name, page number (Page 1 or Page 2), and the revision [...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Setup program. Using the System Setup Program Table 1 lists the keys you use to view or change information on the System Setup screens and to exit the program. Table 1. System- Setup Navigation K[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Time resets the time on the computer's internal clock. Time is kept in a 24 - hour format ( hours:minutes:seconds ). To change the time, press the right - arrow key to increase the number in[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] connector for EIDE CD - ROM and EIDE tape drives. NOTES: For all devices from Dell that use the built - in EIDE controller, set the appropriate Drive option to Auto. For small computer system int[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] 15M - 16M CPU Speed CPU Speed indicates the processor speed at which your system boots. Press the left - or right - arrow key to toggle the CPU Speed option between the resident microprocessor&ap[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] ACPI This option controls the operation of the system's Advanced Configuration and Power Interface (ACPI) feature. When ACPI is set to On, momentarily pressing the power button places the sy[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Boot Sequence Boot Sequence can be set to Diskette First (the default), Hard Disk Only, CD - ROM First, or Device List. The term boot refers to the system's start - up procedure. When turned[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] NOTICE: Only a technically knowledgeable person should change the settings in the Device List screen. The Device List screen (see Figure 2) provides three options for listing and prioritizing the[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] NOTE: Non - Plug and Play devices appear in this list as Adapters without ID support. When determining the order of devices to boot from, the system first considers the order of the devices liste[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] you can type numbers in both fields. The default for Auto Power On is Disabled. Power Management For certain types of monitors and most EIDE hard - disk drives, you can reduce system power consum[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] ENERGY STAR ® systems, see " ENERGY STAR® Compliance " .) However, not all EIDE hard - disk drives support this feature. Enabling this feature for drives that do not support it may ca[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Serial Port 1 and Serial Port 2 Serial Port 1 and Serial Port 2 configure the system's built - in serial ports. These options can be set to Auto (the default) to automatically configure a po[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] As part of the boot routine, the system first checks for a primary hard - disk drive controller card installed in an expansion slot. If no card is found, the system enables the built - in EIDE in[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Your Dell system is shipped to you without the system password feature enabled. If system security is a concern, you should operate your system only with system password protection. You can assig[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] Certain key combinations are not valid. If you enter one of these combinations, the speaker emits a beep. To erase a character when entering your password, press the <Backspace> key or the [...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] The third and subsequent times an incorrect or incomplete system password is entered, the system displays the following message: ** Incorrect password. ** Number of unsuccessful password attempts[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] System Setup program. After a setup password is assigned, only those who know the password have full use of the System Setup program. To change an existing setup password, you must know the setup[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] When you start the System Setup program, Page 2 of the System Setup screens appears with the Setup Password option highlighted, prompting you to type the password. If you do not enter the correct[...]

Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM] 3 . Replace the computer cover. 4 . Reconnect your computer and peripherals to their power sources, and then turn them on. Booting your system with the PSWD jumper plug removed erases the existin[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] Back to Contents Page Using the ISA Configuration Utility : Dell™ OptiPlex™ GX1 Low- Profile Managed PC Systems Overview Adding an Unlisted Card Quick Start Modifying a Card About the I[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] instructions on using the Device Manager to manage resources and resolve conflicts. The remainder of this chapter describes the various features of, and the various ways to use, the ICU. Qu[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] Before your system was shipped from Dell, a technician used the ICU to enter the correct information for the expansion cards initially installed in your computer. If your system was shipped[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] 1 . Make an ICU program diskette of the utility from the Dell ResourceCD . NOTE: If you received an ISA Configuration Utility Diskette with your system, skip to step 2. Follow the instructi[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] Making Selections in the ICU The ICU window is the main window of the utility and the starting point for making expansion- card changes. This window lists all non - Plug and Play ISA, Plug [...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] Use the following procedure to add a listed card with the ICU: 1 . Start the ICU as described in " Starting the ICU ." 2 . From the ICU window, click Add or select Add Card from t[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] 7 . To change any of the resource settings for the card, select the resource setting and then click Settings. The Configuration Settings dialog box (see Figure 4) displays the name of the r[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] 9 . To change individual resource values for the current configuration setting, select the resource value that you want to change and click the Options button located below the resource val[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] 2 . From the ICU window, click Add or select Add Card from the Configure menu. 3 . Click the name of the category of card that you want to add. If you clicked Add in step 2, click OK. A dia[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] If none of the values for the DMA or IRQ resources match the allowable values for your unlisted card (as indicated in the card's documentation), select one of the available values offe[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] Modifying a Card Modifying a card allows you to change the system resources used by a card. This feature is helpful when you want to add a card that requires resources already in use by oth[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] indicated in the card's documentation), select one of the available values offered by the utility and click OK. If you are providing values for the I/O port or memory resource, you mus[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] the system and physically remove the card. Failure to do so can damage your system. 5 . Remove the non - Plug and Play ISA expansion card from the computer. See " Removing an Expansion[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] You can save the information displayed in the Card Resource Usage dialog box by clicking Print To File. The ICU then prompts you for a filename. Saving the System Configuration You can save[...]

Using the ISA Configuration Utility: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/utility.htm[2/21/2013 11:53:00 AM] A check mark next to Locking Enabled signifies that the feature is active; a Lock button appears on the tool bar. 4 . Select the Plug and Play or PCI expansion card that you want to lock or[...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] Back to Contents Page Working Inside Your Computer : Dell™ OptiPlex™ GX1 Low-Profile Managed PC Systems Overview Replacing the Computer Cover Before You Begin Inside Your Computer Removing th[...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] injury or shock. 4 . If you are disconnecting a peripheral from the computer or are removing a component from the system board, wait 5 seconds after turning off the computer before disconnecting [...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] Replacing the Computer Cover Use the following procedure to replace the computer cover: 1 . Check all cable connections, especially those that might have come loose during your work. Fold cables [...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] Inside Your Computer Figure 4 shows an overhead view of your computer to help orient you when installing hardware options. Unless otherwise specified, locations or directions relative to the comp[...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] Jumpers Jumpers are small blocks on a circuit board with two or more pins emerging from them. Plastic plugs containing a wire fit down over the pins. The wire connects the pins and creates a circ[...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] Table 1. System- Board Jumper Settings Jumper Setting Description PSWD Password features are enabled. Password features are disabled. BIOS Reserved (do not change). BUS66M Reserved (do not change[...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] System Board and Riser Board Labels Table 2 lists the labels for connectors and sockets on your system board and riser board, and it gives a brief description of their functions. Table 2. System [...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] SERIAL n Serial port connectors SLOT1 Pentium® II processor SEC cartridge connector TAPI Telephony connector USB USB connectors VIDEO_UPGRADE Video- memory upgrade socket * For information on IS[...]

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM] Replacing the Expansion- Card Cage Use the following procedure to replace the expansion- card cage: 1 . With the securing lever in the upright position, align the slots in the left side of the ex[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] Back to Contents Page Installing System Board Options : Dell™ OptiPlex™ GX1 Low- Profile Managed PC Systems Overview Adding Video Memory Expansion Cards Upgrading the Microprocessor Adding [...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] Expansion Cards Expansion cards are installed on the computer's riser board (see Figure 3 ). The riser board plugs into the RISER connector on the system board (see Figure 1 ) and is consi[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] disconnect them from their electrical outlets, and then wait at least 5 seconds before you remove the computer cover. Also, before you install an expansion card, see " Safety First — For[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] 6 . When the card is firmly seated in the connector and the card - mounting bracket is flush with the brackets on either side of it, secure the bracket with the screw you removed in step 4. 7 .[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] 5 . Unscrew the mounting bracket of the card you want to remove. 6 . Grasp the card by its outside corners, and ease it out of its connector. 7 . If you are removing the card permanently, insta[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] Table 1 lists sample memory configurations and shows valid DIMM combinations and socket placements for each configuration. Table 1. Sample DIMM Configuration Options Total Desired Memory DIMM S[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] Follow this procedure to perform a memory upgrade: 1 . Remove the computer cover according to the instructions in " Removing the Computer Cover ." 2 . Determine the DIMM sockets into [...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] 2 . Locate the plastic securing clips at each end of the socket. Press the clips outward until they snap open. 3 . Orient the DIMM to the socket by aligning the notches in the DIMM's edge [...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] 3 . Locate the video - memory upgrade socket (labeled "VIDEO_UPGRADE") on the system board. See Figure 1 . 4 . Orient the module as shown in Figure 9 . Then install it in the socket. [...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] Upgrading the Microprocessor To take advantage of future options in speed and functionality, you can replace the microprocessor on your system board with any Dell - supported microprocessor upg[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] 5 . Insert the new SEC cartridge/heat sink assembly into the system board connector. Orient the SEC cartridge/heat sink assembly with the heat sink facing the right (as you face the front of th[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] Time - of - day not set - please run SETUP program or Invalid configuration information - please run SETUP program or Strike the F1 key to continue, F2 to run the setup utility To determine whe[...]

Installing System Board Options: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/options.htm[2/21/2013 11:53:02 AM] screwdriver. 5 . Install the new battery. Orient the battery with the side labeled "+" facing up (see Figure 11). Then insert the battery into the socket, and snap it into place. Figu[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] Back to Contents Page Installing Drives : Dell™ OptiPlex™ GX1 Low-Profile Managed PC Systems Overview Installing a Drive in the 5.25 - Inch Drive Bay Removing and Replacing Front - Panel Inserts Installin[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] Removing and Replacing Front - Panel Inserts Empty drive bays contain a front - panel insert to protect the inside of the computer from dust particles and ensure proper airflow within the computer. Before you[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] To replace the front - panel insert for the 3.5 - inch bay, work from outside the cover. Place the insert in position, and press it into the opening. Connecting Drives When installing a drive, you connect two[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] When attaching the interface cable to a drive, be sure to match the colored strip on the cable to pin 1 of the drive's interface connector. For the location of pin 1 on the drive's interface connect[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] NOTE: If you are installing a non - EIDE tape drive, check the documentation for the drive to determine the jumper or switch settings used to designate the drive as drive address DS4 (not DS2 or DS3 as may be[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] Use the score marks on the drive bracket to help align the screw holes on the drive with the screw holes on the bracket (see Figure 8). Figure 8. Installing the 5.25 - Inch Diskette Drive Bracket To further e[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] Figure 10. Attaching Cables to a Drive in the 5.25 - Inch Drive Bay 10 . For an EIDE tape drive or CD - ROM drive, connect the other end of the interface cable to the interface connector labeled "IDE2&qu[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] Installed. For EIDE CD - ROM and tape drives, set the appropriate Drive option (0 or 1) under Drives: Secondary to Auto. 15 . Run the Dell Diagnostics to verify that your system works correctly. See your Diag[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] With the two EIDE interface connectors on the system board, your system can support up to four EIDE devices. EIDE hard - disk drives should be connected to the EIDE interface connector labeled "IDE1.&quo[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] 6 . Secure the drive bracket to the new drive. Turn the drive upside down, and locate the four screw holes around its perimeter. Orient the drive bracket so that the end labeled "CONNECTOR" faces th[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] 9 . If it is not already connected, connect the other end of the EIDE cable to the IDE1 connector on the system board. NOTICE: You must match the colored strip on the EIDE cable with pin 1 on the system board[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] 15 . Enter the System Setup program and update the Drives: Primary and Secondary options. After you update the System Setup options, reboot the system. 16 . Partition and logically format your drive, as descr[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] Installing SCSI Devices To use SCSI devices in your Dell computer, you must have a SCSI host adapter card, which comes with its own SCSI cable. This cable can be used to attach a variety of SCSI devices (hard[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] NOTICE: Do not connect devices to all three connectors (internal narrow connector, internal wide connector, and external connector) on a single SCSI host adapter card. Such a configuration is a violation of t[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] To install an internal SCSI hard - disk drive, complete steps 3 through 7 of " Installing an EIDE Hard - Disk Drive in the Hard- Disk Drive Bracket ." Then continue with step 5 of this procedure. To[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] If you are installing an internal SCSI device, connect a DC power cable to the power input connector on the SCSI device. If you are installing an external SCSI device, connect the socket end of the power cabl[...]

Installing Drives: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/drives.htm[2/21/2013 11:53:04 AM] 16 . Run the SCSI Device(s) test group of the Dell Diagnostics to verify that the new SCSI device is operating properly. See your Diagnostics and Troubleshooting Guide for information on running the Dell Diag[...]

Technical Specifications: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/technica.htm[2/21/2013 11:53:05 AM] Back to Contents Page Technical Specifications : Dell™ OptiPlex™ GX1 Low-Profile Managed PC Systems Microprocessor Video System Information Key Combinations Expansion Bus Controls and Indicators [...]

Technical Specifications: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/technica.htm[2/21/2013 11:53:05 AM] Bus speed PCI: 33 MHz ISA: 8.33 MHz PCI expansion - card connectors two (one PCI connector shares an expansion - card slot with an ISA connector) ISA expansion- card connectors two (one ISA connector[...]

Technical Specifications: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/technica.htm[2/21/2013 11:53:05 AM] Optional integrated NIC RJ45 connector PS/2- style keyboard 6- pin mini - DIN PS/2- compatible mouse 6- pin mini - DIN USB two USB- compliant connectors Audio line- in miniature audio jack Audio line[...]

Technical Specifications: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/technica.htm[2/21/2013 11:53:05 AM] mode only) <Ctrl><Enter> disables the system password at start - up Controls and Indicators Reset control push button Power control push button Power indicators green LEDs (one on front p[...]

Technical Specifications: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/technica.htm[2/21/2013 11:53:05 AM] Temperature: Operating 10° to 35°C (50° to 95°F) Storage –40° to 65°C (–40° to 149°F) Relative humidity 8% to 80% (noncondensing) Maximum vibration: Operating 0.25 G at 3 to 200 Hz at 1 o[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] Back to Contents Page ISA Configuration Utility Messages : Dell™ OptiPlex™ GX1 Low- Profile Managed PC Systems Overview Configuration Manager Messages ICU Error Messages Overview The ISA Con[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] driversdosdwcfgmg.sys In this statement, drive and directory represent the drive and directory where the driver resides. The default is c:plugplay . At least one Plug and Play card in your sy[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] category card. Press OK to proceed. chosen is not the correct category under which to add this card. the correct category's dialog box. Continue the procedure for adding the card as describ[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] file used by the ICU for this card is now invalid or does not exist. Do you wish to load the file ? No configuration (.cfg) file exists for the card being modified. Do you want to load one? when[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] values different from the card's defaults. NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide. Configuration M[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] Manager for it to run. ERROR: Fatal BIOS error Internal Error Code. A BIOS call failed with an internal error. The most likely cause is an incompatibility between the BIOS and the Configuration [...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] configure PCI device, ID= DeviceID . Failed to configure Number of Total Count Plug and Play ISA devices. Use your system's configuration utility to resolve conflicts. Press any key to cont[...]

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems file:///C|/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM] Play ISA devices. Use your system's configuration utility to resolve conflicts. Press any key to continue. 2 . Reboot your system. The ICU should automatically configure your Plug and Play [...]