Dell S300 Bedienungsanleitung

Dell™ S300 Projector User’ s Guide[...]

Notes, Notices, and Cautions NOTE: A NOTE indicates important in formation that helps you make better use of your projector . NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury , or death. _______________[...]

Contents 3 Contents 1 Y our Dell Projector . . . . . . . . . . . . . . . . . . 6 About Y our Projector . . . . . . . . . . . . . . . . . 7 2 Connecting Y our Projector . . . . . . . . . . . . 9 Connecting to a Computer . . . . . . . . . . . . . . . . 10 Connecting a Computer Using a VGA Cable . . . . 10 Monitor Loop-Through Connection Using VGA Cab[...]

4 Contents 3 Using Y our Projector . . . . . . . . . . . . . . . . 20 T urning Y our Projector On . . . . . . . . . . . . . . . . 20 T urning Y our Projector Off . . . . . . . . . . . . . . . . 20 Adjusting the Projected Image . . . . . . . . . . . . . 21 Raising the Projector Height . . . . . . . . . . . . 21 Lowering the Projector Height . . . . [...]

Contents 5 Configuring the Network Setting . . . . . . . . . . 49 Accessing W eb Management . . . . . . . . . . . 49 Managing Properties . . . . . . . . . . . . . . . . 50 4 T roubleshooting Y our Projector . . . . . . . . 62 Guiding Signals . . . . . . . . . . . . . . . . . . . . . 66 Changing the Lamp . . . . . . . . . . . . . . . . . . . . 67 5 [...]

6 Y our Dell Projector 1 Y our Dell Projector Y our projector comes with all the items shown below . Ensure that you have all the items, and contact Dell™ if anything is missing. Package Contents P ower cable 1.8m VGA cable (VGA to VGA) Remote control CD User ’s Guide & Documentation AAA Batteries (2)[...]

Y our Dell Projector 7 About Y our Projecto r CAUTION: Safety Instructions 1 Do not use t he projector n ear appliances that gener ate a lot of heat. 2 Do not use t he projec tor in areas wh ere there is an excessive amount of dust. The dust may cau se the system to fail and the projector will auto matically shutdown. 3 Ensure that the projector is[...]

8 Y our Dell Projector 7 Do not look in to the lens while th e projector is on as it may cause inju ry to your eyes. 8 Do not place any objects near or in front of the projector or cover its lens while the projector is on as the heat may cau se the object to m elt or burn. NOTE: • Do not attempt to ceil ing mount the projector your self. It shoul[...]

Connecting Y our Projector 9 2 Connecting Y our Projector CAUTION: Before you begin any of the procedure s in this section, follow the Safety Instructions as describ ed on page 7. 1 RJ45 connector 10 +12V DC out connector 2 Mini USB remote connector 11 Security bar 3 HDMI connector 12 Audio output conne ctor 4 VGA-A output (monitor loop-through) 13[...]

10 Connecting Y our Projector Connecting to a Computer Connecting a Computer Using a VGA Cable NOTE: The USB cable is not provided with your projector . NOTE: The USB cable must be connected if you want to use the Page Up and Page Down features on the remote control. 1 Po w e r c o r d 2 VGA to VGA cable 3 USB-A to USB-B c able[...]

Connecting Y our Projector 11 Monitor Loop-Thr ough Connection Using VGA Cabl es NOTE: Only one VGA cable is shipped with your projector . An additional VGA cable can be purchased on the Dell website at dell.com . 1 Po w e r c o r d 2 VGA to VGA cable[...]

12 Connecting Y our Projector Connecting a Computer Using an RS232 cable NOTE: The RS232 cable is not shipped with your projector . Consult a professional installer for the cabl e and RS232 remote control software. 1P o w e r c o r d 2 RS232 cable[...]

Connecting Y our Projector 13 Connecting a DVD Player Connecting a DVD Player Using an S-video Ca ble NOTE: The S-video cable is not shipped with your projector . Y ou can purchase the S-Video extension (50 ft/100 ft) cable on the Dell website at dell.com . 1 Po w e r c o r d 2 S-video cable[...]

14 Connecting Y our Projector Connecting a DVD Player Using a Composite Video Cable NOTE: The Composite Video cable is not shippe d with your projector . Y ou can purchase the Composite V ideo Extension (5 0 ft/100 ft) cable on the Dell website at dell.com . 1 Po w e r c o r d 2 Composite video cable[...]

Connecting Y our Projector 15 Connecting a DVD Player Using a Comp onent V ideo Cable NOTE: The VGA to Component V ideo cable is not shipped with your projector . Y ou can purchase the VGA to Component Vi deo Extension (50 ft/100 ft) cable on the Dell website at dell.com . 1 Po w e r c o r d 2 VGA to Component Video cable[...]

16 Connecting Y our Projector Connecting a DVD Player Using an HDMI Cable NOTE: The HDMI cable is not shippe d with your projector . 1 Po w e r c o r d 2 HDMI cable[...]

Connecting Y our Projector 17 Connecting to Local Area Network T o contro l the projector t hat is connected to a network t hrough an RJ45 cable. NOTE: The RJ45 cable is not shipped with your projector . 1 Po w e r c o r d 2 RJ45 cable Local Area Network (LAN)[...]

18 Connecting Y our Projector Professional Installation Options: Installation for Driving Automatic Screen NOTE: Use the dimension of 12V DC plug in 1.7 mm (ID) x 4.00 mm (OD) x 9.5 mm (shaft) to connect the automatic screen with the projector . 12V DC Plug 1 Po w e r c o r d 2 12V DC Plug 3 Aut om at ic Sc ree n 2 1[...]

Connecting Y our Projector 19 Connection With Co mmercial RS232 Control Bo x NOTE: The RS232 cable is not shipped with your projector . Consult a professional technician to obtain the cable. 1 Po w e r c o r d 2 RS232 cable 3 Commercial RS232 control box[...]

20 Using Y our Projector 3 Using Y our Projector T u rning Y our Projector On NOTE: T urn on the projector before you turn on the source (computer , DVD player , etc.). The Pow er button light blinks blue until pressed. 1 Remove the lens cap. 2 Connect the power cor d and appropriate signal cables. F or information about connecting the projector , [...]

Using Y our Projector 21 3 T o power off the projector quickly , press the Po w e r button and hold for 1 second while the projector’s cooling fans are still ru nning. NOTE: Before you turn on the projector agai n, wait for 60 seconds to allow the internal temperature to stabilize. 4 Disconnect the power cord from the el ectrical outlet an d t he[...]

22 Using Y our Projector Adjusting the Projector Focus CAUTION: T o avoid damaging the projector , ensure that the zoom lens and elevator foot are fully retracted before moving the projector or placing the projector in its carrying case. 1 Rotate the focus tab until the image is cl ear . The pr ojector focuses at di stances ranging between 1.64 ft [...]

Using Y our Projector 23 Adjusting Projection Image Size 294" (746.76cm) 223" (566.42 cm) 178" (452.12 cm) 134" (340.36 cm) 89" (226.06 cm) 44.6" (1 13.28 cm) 294" (746.76cm) 223" (566.42 cm) 178" (452.12 cm) 134" (340.36 cm) 89" (226.06 cm) 44.6"(1 13.28 cm) Projector to screen distance 1[...]

24 Using Y our Projector Screen (Diagonal) Max. 44.6" (113.28 cm) 89" (226.06 cm) 134" (340.36 cm) 178" (452.12 cm) 223" (566.42 cm) 294" (746.76cm) Min. 44.6" (113.28 cm) 89" (226.06 cm) 134" (340.36 cm) 178" (452.12 cm) 223" (566.42 cm) 294" (746.76cm) Screen Size Max. (WxH) 37.80" [...]

Using Y our Projector 25 Using the Control Panel 1 P ower T urns the projector on or off. F or more information, see "T urning Y our Pr ojector On" on page 20 and "T urning Y our P rojector Off" on page 20. 2 Up / Keystone adjustment P ress to navigate through the On-Scr een Display (OSD) Menu items. P ress to adjust image disto[...]

26 Using Y our Projector 4 TEMP warning light If the TEMP amber indicator is on or blinking, one of the following problems could be occurring: • Internal temperature of the projector is too high • Color wheel failure F or more information, see "T roubleshooting Y our P rojector" on page 62 and "Guiding Signals" on page 66. 5[...]

Using Y our Projector 27 Using the Remote Control 1 Po w e r T urns the projector on or off. F or more information, see "T urning Y our Projector On" on page 20 and "T urning Y our P rojector Off" on page 20. 2 Enter P ress to confirm the sele ction. 3 Right P ress to navigate through the On-Scr een Display (OSD) Menu items. 4 D[...]

28 Using Y our Projector 5 Laser P oint the remote control at the screen, pr ess and hold the laser button to activate the laser light. CAUTION: Do not look at the laser point when it is active. Avoid dir ecting the laser light on your eyes. 6 Aspect Ratio P ress to ch ange aspect ratio of a displayed image . 7 Keystone adjustment P ress to adjust [...]

Using Y our Projector 29 18 Mute Pr ess to mute or un-mute the projector speake r . 19 Zoom + P ress to incr ease the image. 20 Zoom - P ress to decr ease the image. 21 Vo l u m e u p P ress to incr ease the volume. 22 Vo l u m e d o w n P ress to decr ease the volume. 23 F r eeze P ress to pause the scr een image, then press "F reeze" ag[...]

30 Using Y our Projector Installing the Remote Control Batteries NOTE: Remove the batteries from the remote control when not in use. 1 P ress the tab to lift the battery compartment cover . 2 Check the polarity (+/-) marking on the batteri es. 3 Insert the batteries and alig n their polarity correctly accor ding to th e marking in the batter y comp[...]

Using Y our Projector 31 Operating Range With Remote Control NOTE: Actual operating range may slightly differ from the diagram. W eak batteries will also prevent the remote con trol from properly operating the projector . Angle Distance Operating range Angle ±20 ° Distance 7m/22.97feet Distance Angle[...]

32 Using Y our Projector Using the On-Screen Display • The projector ha s a multi-languag e On-Scr een Display (O SD) Menu that can be displayed w ith or witho ut an inp ut source . • T o navigate thro ugh the tabs in the Main Menu, press the or buttons on your projecto r ’s contro l panel or remote control. • T o select a submenu, pre ss t[...]

Using Y our Projector 33 INPUT SELECT The Input Select menu allows you to se lect your projector’s input source. A UTO S OURCE — Select Off (the default) to lock the current input signal. If you press the Source button when the Aut o Source mode is set to Off , you can manually select the input signal. Select On to auto detect the available inp[...]

34 Using Y our Projector NOTE: Y ou cannot disable your current inpu t source. At anytime, a minimum of two input sources have to be en abled. PICTURE (in PC Mode) Using the Pi c tu r e menu, you can adjust the display settings of your projector . The Pictur e menu provides the following opt ions: V IDEO MODE — Allows you to optimize th e display[...]

Using Y our Projector 35 PICTURE (in V ideo Mode) Using the Pi c tu r e menu, you can adjust the display settings of your projector . The Pictur e menu provides the following opt ions: V IDEO MODE — Allows you to optimize th e display image: P resentation , Brigh t , Movie , sRGB (provides more accurate color r epresentation), and Custom (set you[...]

36 Using Y our Projector PICTURE ADV ANCED Using the Pictur e Advanced menu, you can adjust the display settings of your projector . The Pictur e Advanced menu provides the following options: W HITE I NTENSITY — Use and to adjust the display white intensity . C OLOR T EMP — Allows you to adjust the color temperature. The scr een appears cooler [...]

Using Y our Projector 37 • Original — Select Original to mainta in the aspect ratio of image projected according to input s ource. • 4:3 — The input source scales to fit the scr een and proje cts a 4:3 image. • W i de — The input source scales to fi t the width of the scr een to project a wide scr een image . Z OOM — P ress to activat[...]

38 Using Y our Projector DISPLA Y (in Vide o Mode) Using the Dis play menu, you can adjust the display settings of your projector . The Pictur e menu provides the following opt ions: A SPECT R ATIO — Allows you to select the aspect ratio to adjust how the image appears. • Original — Select Origin al to mainta i n the asp ect rati o of imag e [...]

Using Y our Projector 39 LAMP Using the Lamp menu, you can adjust the display settings of your projector . The Lamp menu provides the following options: L AMP H OUR — Displays the operating hours since the last lamp timer r eset. L AMP H OUR R ESET — Select Ye s to reset the lamp timer . SET UP The Set Up menu allows you to adjust settings for [...]

40 Using Y our Projector L ANGUAGE — Allows you to set the language for the O SD. P ress to activate the Language menu. P ROJECTOR M ODE — Allows you to select the proje ctor mode, depending upon how the projector is mounted. • F ront P rojection-Desktop — This is the default option. • F ront P rojection -Ceiling Mount — Th e projector [...]

Using Y our Projector 41 3D D ISPLAY — Select On to start the 3D display function. Default is Off. NOTE: T o activate 3D Display function, ensure that 3D goggles, 3D video contents and 60Hz/120Hz signal output graphic card supported on PC/NB are ready . 3D Sync Invert— If you see a discr ete or overlapping image while wearing DLP 3D goggles, yo[...]

42 Using Y our Projector IP A DDRESS — Automatically or manually a ssigns the IP addr ess to the projector connected to the network. S UBNET M ASK — Configur e the Subnet Mask of the network conne ction. G ATEWAY — Check the Gateway addr ess with your network/system administrator if you configure it manually . DNS— Check the DNS Server IP a[...]

Using Y our Projector 43 OTHERS The Others menu allows you to change settings for Menu, Screen, A udio , P ower , Security , and Closed Caption (for NTSC only). Y ou can also perform T est P attern and F actory Reset. M ENU S ETTINGS — Select and press to activate menu settings. The menu settings consists of the following options: M ENU P OSITION[...]

44 Using Y our Projector S CREEN S ETTINGS — Select and pr ess to activate screen settings. The scr een settings menu consists of the following options: C APTURE S CREEN — Select and pr ess to capture the screen display , the following message appears on th e screen. NOTE: T o capture a full image, ensure the input signal that is connected to t[...]

Using Y our Projector 45 P OWER S ETTINGS — Select and press to activate power settings. The power settings menu consists of the following options: P OWER S AVING — Select Off to disable P ower Saving mode. By default, the projector is set to enter power saving mode after 120 minutes of no activi ty . A warning message appears on screen showing[...]

46 Using Y our Projector P ASSWORD — When P assword P rotect is enabled, a P asswor d P rotect screen reque sting you to enter a password will be displayed when the power plug is inserted into the electrical outlet and the power for the projector is first turned on. By default, this function is di sabled. Y ou can enable th is feature by selectin[...]

Using Y our Projector 47 2 If you have entered an incorrect passwor d, you will be given another 2 chances. After the three invalid attempts, the projector will automatically turn off. NOTE: If you forget your password, contact DELL™ or qualified service personnel. 3 T o disable the password function, select Off to disable the function. 4 T o del[...]

48 Using Y our Projector C HANGE P ASSWORD — Key in the original passwor d, then enter the new password and confirm the new passwor d again. C LOSED C APTION — Select On to enable close caption and activate the closed caption menu. Select an appropriate cl osed captions option: CC1, CC2, CC3, and CC4.[...]

Using Y our Projector 49 NOTE: Closed caption option is available for NTSC only . T EST P ATTERN — T est P attern is used to test focus and resolution. Y ou can enable or disable the Te s t P a t t e r n by selecting Off, 1 or 2 . Y ou can also invoke the Te s t P a t t e r n 1 by pressing and holding down and buttons on the control panel simulta[...]

50 Using Y our Projector Managing the Projector From W eb Management Configuring the Network Setting If the projector is co nnected to a network, you can access the projector using a web browser by configuring the network sett ing (TCP/IP). When using the network function, the IP addre ss should be uniqu e. F or configuring the network setting, ref[...]

Using Y our Projector 51 Managing Properti es Home • Access the W eb Management Home page by entering the projector ’s IP address a t the web browser . See "Network" on page 41. • Language : Allows you to set the language for web management.[...]

52 Using Y our Projector Network Settings See OSD section on page 41. •S e t u p t h e Model Name , Pr o j e c t o r N a me , Loca ti on and Contact information (up to 21 characters for each field). Press Save to stor e the settings. • Choose DHCP to assign an IP addr ess to the projector from a DHCP server automatically , or Man ual to assign [...]

Using Y our Projector 53 Projector Status and Con trol Page • Pr o j e c t o r S t a t u s : There ar e 5 status: Lamp On, Standby , P ower Saving, Cooling and W arming up. Click the Ref re sh button to refr esh the status and control settings. • Po w e r S a v i n g : P ower Saving can be set to Off, 30, 60, 90, or 120 minutes. Refer to page 4[...]

54 Using Y our Projector - Bright: Maximum brightne ss and contrast. - Movie: F or viewing movi e & photo . - sRGB : P rovide a mor e accurate color r epr esentation. - Custom: User prefer red settings . • Blank Screen : Y ou can select On or Off. • Aspect Ratio : Allows you to selec t the aspect ratio to adjust how the i mage appears. • [...]

Using Y our Projector 55 E-mail Alert • E-mail Alert: Y ou can set whether to be notified by email (Enable) or not (Disable). • T o/CC/F rom: Y ou can enter email address of sender (F rom) and recipients (T o/Cc) to receive notification when an abnormality or warning occurs. • Alert Condition: Y ou can select the abnormalities or warnings to [...]

56 Using Y our Projector Password Setting Use P assword Setting to set up an administrator password to access the We b Management . When enabling password for the first time, set the passwor d befor e enabling it. When the passwor d function is enabled, the administrator password will be r equired for acce ssing the W eb Management . • New P assw[...]

Using Y our Projector 57 Login Page • Administrator P assword : Enter the Administrator P assword and click Login.[...]

58 Using Y our Projector Firmware Update Use the F irmware Update page to update your projector’s firmware. P ress Update to start. • Ple ase wait till the count r eaches 0.[...]

Using Y our Projector 59 • W ait for 3 seconds and it will proceed to the next step automa tically. • Select the file to u pgrade and click the Upgrade button. When upgrading is in progr ess, the Cancel button is disabled.[...]

60 Using Y our Projector • Ple ase wait till the count r eaches 0. • Whe n upgrade is complete, ple ase click the ReL og in button to go back to the W eb Management Home P age.[...]

Using Y our Projector 61 TIPS: I would like r emote access the projector via Internet. What is the better setting for the browser? T o have a better setting for the browser , please follow the steps below: 1 Open Control P anel Internet Options General tab Te m p o r a r y I n t e r n e t F i l e s Settings Select Every visit to the pages . 2 Some [...]

62 Using Y our Projector Why am I unable to access the SMTP server? 1 Check with yo ur MIS or netw ork administrator wh ether the SMTP server function is open for th e projector and th e IP assigned to the projecto r is allowed to access the SMTP server . The projector ’s SMTP socke t port number is 25, this cannot be changed. 2 Check if the ou t[...]

62 T roubleshooting Y our Projector 4 T roubleshooting Y our Projector If you experience problems with your pr ojector , see the following troubleshooting tips. If the problem persists, contact Dell™. See Contacting Dell™ on page 74. Problem Possible Solution No image appears on the screen • Ens ure that the lens cap is removed and the projec[...]

T roubleshooting Y our Projector 63 P artial, scrolling, or incorrectly displayed image 1 Pre s s t h e Aut o Ad j us t button on the remote control or the control pane l. 2 If you are using a Dell ™ portable computer , set the resolution of the computer to WX GA (1280 x 800) or XGA (102 4 x 768): a Right-cl ick the unused port ion of your Micros[...]

64 T roubleshooting Y our Projector The image is stretched when displaying a 16:9 D VD The projector automatically detects the input signal format. It will maintain the aspect ratio of the projected image according to input signal format with an Original set ting. If the image is still stretched, ad just the aspect ratio in the Set Up menu in the O[...]

T roubleshooting Y our Projector 65 TEMP light is blinking amber A projector fan has failed and the projector will automatically shut down. T ry to clear the projector mode by pressing and holding the POWER button for 10 seconds. Please wait for about 5 minutes and try to power up again. If the problem persists, contact Dell™. The OSD does not ap[...]

66 T roubleshooting Y our Projector Guiding Signals Pro j ec to r S t at us Des cr i pt io n Control Buttons Indica tor Po w e r TEMP (Amber ) LAMP (Amber ) Standby mode Projector in Standby mode. Ready to power on. BLUE Flashing OFF OFF W arming up mode Projector takes some time to warm up and power on. BL UE OFF OFF Lamp on Projector in Normal mo[...]

T roubleshooting Y our Projector 67 Changing the Lamp CAUTION: Before you begin any of the procedure s in this section, follow the Safety Instructions as describ ed on page 7. Replace the lamp when the message " Lamp is approaching the end of i ts useful life in th e operation. Repla cement sug gested! www.dell.com/lamps " appears on the [...]

68 T roubleshooting Y our Projector 9 Reset the lamp us age time by selecting "Y es" for Lamp Reset in the OS D Lamp tab (see Lamp menu on page 39 ). When a new lamp module has been chan ged, the projector will automatically de tect and reset the lamp hours. CAUTION: Lamp Disposal (for th e US only) LAMP(S) INSID E THIS PRODUCT CONT AIN M[...]

Specifications 69 5 Specifications Light V alve 0.65" WXGA S450 DMD, DarkChip3™ Brightness 2200 ANSI Lumens (Max.) Contrast Ratio 2400:1 T ypical (F ull On/F ull Off) Uniformity 80% T ypical (Japan Standard - JBMA) Number of P ixels 1280 x 800 (WXGA) Displayable Color 1.07 billion colors Color Wheel Speed 2X P rojection Lens F-Stop: F/ 2.8 F[...]

70 Specifications Dimensions (W x H x D) 12 x 3.9 x 9.7 inches (306 x 99 x 246.5 mm) Environmental Operating temperature : 5 o C - 35 o C (41 o F- 95 o F) Humidity : 80% maximum Storage temperatur e: 0 o C to 60 o C (32 o F to 140 o F) Humidity : 90% maximum Shipping temperature: -20 o C to 60 o C (-4 o F to 140 o F) Humidity : 90% maximum I/O Conn[...]

Specifications 71 NOTE: The lamp life rating for any projector is a measure of brightness degradation only , and is not a specification for the time it takes a lamp to fail and cease light output. Lamp life is defined as the time it takes for more than 50 percent of a lamp sample population to have brightness decrease by approximately 50 percent of[...]

72 Specifications RS232 Pin Assignment RS232 Protocol • Communication Settings • Command types T o pop up the OSD menu and adjust the se ttings. • Control command Syntax (F rom PC to P rojector) [H][AC][SoP][CRC][ID][SoM][COMMAND] • Exampl e : P ower ON Command (Send low byte firstly) --> 0xBE, 0xEF , 0x10, 0x05, 0x00, 0xC6, 0xFF , 0x11,[...]

Specifications 73 Compatibility Modes (Analog/Digital) Resolution Refresh Rate (Hz) Hsync Fr equency (KHz) Pixel Clock (MHz) 640 x 350 70.087 31.469 25.175 640 x 480 59.940 31.469 25.175 640 x 480 p60 59.940 31.469 25.175 720 x 480 p60 59.940 31.469 27.000 720 x 576 p50 50.000 31.250 27.000 720 x 400 70.087 31.469 28.322 640 x 480 75.000 37.500 31.[...]

74 Contacting Dell Contacting Dell F or customers in the United States, call 800- WWW -DELL (800-9 99- 3355). NOTE: If you do not have an active Inte rnet connection, you can find contact information on your purchase invoice, packi ng slip, bill, or Dell prod uct catalog. Dell™ provides several online and telephone-based support and service optio[...]

Glossary 75 Appendix: Glossary ANSI L UMENS — A standar d for measuring the brightness. It is calculated by dividing a square meter image into nine equal r ectangles, measuring the lux (or brightness) reading at the center of ea ch r ectangle, and averaging these nine points. A SPECT R ATIO — The most popular aspect ratio is 4:3 (4 by 3). Early[...]

76 Glossary dB — decibel — A unit used to express r elative difference in power or intensity , usually between two acoustic or electric signals, equal to ten times the common logarithm of the ratio of the two levels. Diagonal Screen — A method of measuring the size of a screen or a projected image. It measur es from one corner to t he opposit[...]

Glossary 77 NTSC — National T elevision Standar ds Committee. North American standar d for video and broadcasting, with a video format of 525 lines at 30 frames per second. PA L — Phase Alternating Line. A European broadcast standard for video and broadcasting, with a video format of 625 lines at 25 frames per second. Reverse Image — F eature[...]

78 Index Index Numerics 12V output 71 A Adjusting the Projected Imag e 21 Front tilt adjustment wheel 21 Lowering the Projector Height 21 Raising the Projector Height 21 Tilt adjustment wheel 21 Adjusting the Projector Focus 22 Adjusting the Projector Zoom and Focus Focus tab 22 Audio Input 44 Audio Settings 44 C Capture Screen 43 Changing the Lamp[...]

Index 79 RJ45 connector 9 RS232 connector 9 Security bar 9 Security cable slot 9 S-video connector 9 VGA-A input (D-sub) connector 9 VGA-A output (monit or loop-through) 9 VGA-B input (D-sub) connector 9 Contact Dell 6 , 64 , 67 Control Panel 24 D Dell contacting 74 F Factory Reset 48 M Main Unit 7 Control panel 7 Focus tab 7 IR receivers 7 Lens 7 [...]

80 Index S Screen 43 Screen Settings 43 Security Settings 45 Speaker 44 Specifications Audio 69 Brightness 69 Color Wheel Speed 69 Contrast Ratio 69 Dimensions 70 Displayable Color 69 Environmental 70 I/O Connectors 70 Lamp 71 Light Valve 69 Noise Level 69 Number of Pixels 69 Power Consumption 69 Power Supply 69 Projection Distance 69 Projection Le[...]