Dodge 2007 PM49 Caliber Bedienungsanleitung

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 7 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 6 5 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ................................. 1 3 7 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ........... 6 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 9 ▫ Ignition Key Removal ................... 9 ▫ Locking Doors W ith The Key .............. 1 0 ▫ Key-In-Ignition Reminder ................ 1 0 䡵 Sentry Key — If Equipped ................ 1 1 ▫ Replacement Keys ...................... 1 [...]

▫ T o T urn Off “Flash Lights W ith Lock” ........ 2 1 ▫ Programming Additional T ransmitters ........ 2 2 ▫ General Information .................... 2 3 ▫ Battery Replacement .................... 2 3 䡵 Security Alarm System — If Equipped ....... 2 4 ▫ T o S e t T h e A l a r m ...................... 2 5 ▫ T o Disarm The System [...]

A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransaxle Place the shift lever in P ARK. T urn the ignition switch t[...]

ignition cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured.[...]

SENTR Y KEY — IF EQUIPPED The Sentry Key Immobilizer System prevents unautho- rized operation of the vehicle by disabling the engine. The system will shut the engine off after two (2) seconds of running if an invalid key is used to start the vehicle. This system utilizes ignition keys, which have an elec- tronic chip (transponder) embedded into t[...]

All of the keys provided with your new vehicle have been programmed to the vehicle electr onics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it cannot be programmed to any other vehicle. At the time of purchase, the origin[...]

Repeat this procedur e to program up to 8 keys. If you do not have a programmed sentry key , contact your dealer for details. General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This de[...]

Automatic T ransaxle Ignition Interlock System This system prevents the key fr om being removed unless the shift lever is in P ARK. It also prevents shifting out of P ARK unless the key is in the ACC, or ON positions, and the brake pedal is depressed. DOOR LOCKS Manual Door Locks Use the manual door lock plunger to lock the doors from inside the ve[...]

W ARNING! When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal inju- ries and death. CAUTION! An unlocked vehicle is an invitation to thieves. Always remove [...]

Automatic Door Locks—If Equipped The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pr essed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not pr evious[...]

3. Depress the power door lock switch to lock the doors. 4. V erify reprogramming by driving the vehicle. Auto Unlock The doors will unlock automatically on vehicles with power door locks if: 1. The Auto Unlock feature is enabled. 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in NEUTRAL or [...]

For vehicles not equipped with the EVIC the Auto Unlock Feature can be enabled or disabled by performing the following procedur e: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK 4 times ending up in the LOCK position. 3. Depress the power door unlock switch to unlock the doors[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down window and open the door with the outside door handle. REMOTE KEYLESS EN[...]

T o unlock the doors and liftgate: Press and r elease the UNLOCK button on the key fob once to unlock only the driver’s door or twice to unlock all the doors and liftgate. When the UNLOCK button is pressed, the illuminated entry will initiate, and the parking lights will flash on twice. The time for this feature is pr ogrammable on vehicles equip[...]

T o lock the doors and liftgate: Press and r elease the LOCK button on the transmitter to lock all doors. The turn signal lights will flash and the horn will chip once to acknowledge the lock signal. If desired, the “Sound Horn On Lock” featur e can be turned on or off. On electr onic vehicle information center (EVIC) equipped vehicles refer to[...]

3. T est the flash lamps with LOCK feature while outside of the vehicle, by pressing the LOCK button on the key fob with the ignition in the LOCK position, and the key removed. NOTE: Pressing the LOCK button on the key fob, while you are in the vehicle, will activate the Security Alarm. Opening a door with the Security Alarm activated will cause th[...]

9. A single chime will be heard. 10. W ithin four seconds of hearing the chime, press and release the UNLOCK button on the fob. 1 1. A single chime will be heard. 12. Repeat steps 8 through 10 to pr ogram up to six additional fobs. 13. T urn the ignition to the OFF position. 14. Y our vehicle will remain in pr ogram mode up to 60 seconds from when [...]

1. If the key fob is equipped with a screw , remove the screw . W ith the transmitter buttons facing down, use a flat blade to pry the two halves of the transmitter apart. Make sure not to damage the elastomer seal during removal. 2. Remove and replace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery d[...]

T o set the alarm: 1. Remove the keys from the ignition switch and get out of the vehicle. 2. Lock the door using either the door key , power door lock switch, or the Keyless Entry T ransmitter and close all doors. 3. The indicator light in the instrument cluster will flash rapidly for 16 seconds. This shows that the system is arming. During this p[...]

LIFTGA TE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. T o unlock the liftgate, insert the key into the lock and turn to the right (manual lock models only). The liftgate can also be unlocked using the remote keyless entry or by activating the power door lock switches located on the[...]

W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower swit[...]

Auto Down The driver’s window switch has an Auto Down feature. Push the window switch past the first detent, release, and the window will go down automatically . T o cancel the Auto Down movement, operate the switch in either the up or down direction and r elease the switch. Window Lockout Switch The window lockout switch on the driver’s door a[...]

If your vehicle is equipped with the Occupant Classifi- cation System (OCS) there will be a Passenger Airbag Disabled (P AD) Indicator Light located on the center of the instrument panel. Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as p[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat[...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When th[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increasing [...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the [...]

As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position. Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder be[...]

2. Grasp the mini latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini latch plate into the mini buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the[...]

6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt. A snug belt r educes the risk of slidi[...]

10. T o disengage the mini latch from the mini buckle for storage, insert the regular latch plate into the black button on the top of the mini buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . Insert the mini latch plate into the slot provid[...]

belt. The driver should also instruct all other occupants to buckle their seat belts. Once the warning is triggered, the Enhanced W arning System (BeltAlert) will continue to chime and flash the Seat Belt W arning Light for 96 seconds or until the driver’s seat belt is buckled. The Enhanced W arning System (BeltAlert) will be reactivated if the d[...]

Seat Belts And Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdomen[...]

The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. Also, the front passenger airbag is certified to the Federal regulations that define Occupant Classification (Refer to ⬙ Occupant Classification System ⬙ in this section). W[...]

Airbags inflate in moderate to high speed impacts. Along with seat belts and pretensioners, fr ont airbags work with the driver inflatable knee blocker and the integrated passenger knee blocker (non-inflatable) to provide im- proved pr otection for the driver and front passenger . Side airbags also work with seat belts to improve occupant protectio[...]

If a child from 1 to 12 years old must ride in the fr ont passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint. Refer to the section on Child Restraint. Y ou should read the instructions pr ovided with your child restraint to make sur e that you are using it pr operly . 2. All occu[...]

• Driver Airbag • Passenger Airbag • Front Seat Mounted Side Airbags (If equipped) • Side Curtain Airbags • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Knee Impact Bolsters • Driver Inflatable Knee Blocker • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pr etensioners • Occupa[...]

During a moderate-to-severe r ear impact the ORC may deploy the seat belt pretensioners alone. Also, the ORC turns on the AIRBAG warn- ing light and P AD indicator light in the instrument panel for 6 to 8 seconds for a self-check when the ignition is first turned on. After the self-check, the AIRBAG warning light will turn off. The P AD indicator l[...]

when the front passenger airbag is turned of f. The P AD Indicator lamp illuminates the words ⬙ P ASS AIR BAG OFF ⬙ to show that the front passenger airbag will not inflate during a collision requiring airbags. When the right front passenger seat is empty or when very light objects are placed on the seat, the passenger air bag will not inflate [...]

Front Passenger Seat Occupant Passenger Air- bag Disable (P AD) Indicator Light Airbag Status Adult OFF ON Child ON OFF Grocery Bags, Heavy Briefcases and Other Rela- tively Light Ob- jects ON OFF Empty or V ery Small Objects OFF* OFF * Since the system senses weight, some small objects will turn the P AD Indicator Light on. Drivers and adult passe[...]

sensors, a fault will occur which turns on both the P AD Indicator Light and the Airbag W arning Light. Once the lodged object is removed, the fault will be automatically cleared after a short period of time. • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel[...]

The ORC Module monitors the readiness of the elec- tronic parts of the system whenever the ignition switch is in the ST AR T or ON positions. These include all of the items previously mentioned. In moderate to severe side collisions, the side airbag inflator on the crash side of the vehicle is triggered, releasing a quantity of nontoxic gas. The si[...]

• Do not modify the front seat center console or center position seat in any way . • Do not use prior or future model year seat covers not designated for the specific model being repair ed. Al- ways use the correct seat cover specified for the vehicle. • Do not replace the seat cover with an aftermarket seat cover . • Do not add a secondary[...]

If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold. The abrasions are similar to friction r ope burns or those you might get sliding along a carpet or gymna[...]

• T urns on the interior lamps which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to p[...]

Airbag Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately . • The AIRBAG light does not come on during the 6 to 8 seconds when the ignition switch is first [...]

(usually the vehicle owner or lessee) before accessing the electronic data stor ed, unless order ed to download data by a court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be pr ovided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incor[...]

Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it. Children 12 years and under should ride pr operly buck- le[...]

infant carriers do, so they can be used rearwar d-facing by children who weigh mor e than 20 lbs. (9 kg) but are less than one year old. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a fr ont passenger airbag. An airbag deployment could cause severe injury or death to infants in this position. • Children w[...]

Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it, befor e you buy it. • The restrain[...]

• Buckle the child into the seat according to the child restraint manufactur er’s directions. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it fr om the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seat backs and cause seriou[...]

restraints in adjacent r ear seating positions, you can use the LA TCH anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position. If your child restraints ar e not LA TCH-compatible, you can only install the child re- straints using the vehicle’s seat belts. Please refer to, [...]

reach. If the buckled seat belt interfer es with the child restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap. Children T oo Large For Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are[...]

ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not requir ed for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-thr ottle acceleration, within the limits of local traffic laws, c[...]

If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle. Set the blower at high speed. W ARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high spe[...]

Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil or other fluid leaks. Also, if gasoline fumes are detected or fuel, power steering fluid, trans[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 6 9 ▫ Inside Day/Night Mirror — If Equipped ...... 6 9 ▫ Outside Mirror—Driver’s Side ............. 6 9 ▫ Outside Mirror—Passenger’s Side ........... 6 9 ▫ Electric Remote-Control Mirr ors ............ 7 0 ▫ V anity Mirrors — If Eq[...]

▫ Fold Flat Front Passenger Seat ............. 9 8 ▫ Folding Rear Seat ...................... 9 9 ▫ Reclining Rear Seat — If Equipped ......... 1 0 0 䡵 T o Open And Close The Hood ............ 1 0 1 䡵 Lights .............................. 1 0 2 ▫ Map/Reading Lights ................... 1 0 2 ▫ Multi-Function Control Lever ...........[...]

䡵 Garage Door Opener — If Equipped ........ 1 1 2 ▫ Programming The Universal T ransceiver ..... 1 1 3 ▫ “Rolling Code” Programming ............ 1 1 4 ▫ Canadian Programming/ Gate Programming .................... 1 1 6 ▫ Operation ........................... 1 1 6 ▫ Reprogramming A Single Button .......... 1 1 6 ▫ Security .....[...]

▫ Cargo Light/Removable Self- Rechar ging Flashlight – If Equipped ................ 1 2 8 ▫ T onneau Cover — If Equipped ............ 1 3 0 ▫ Removable Load Floor .................. 1 3 0 ▫ Cargo T ie-Down Loops ................. 1 3 0 ▫ Fold Down Speakers – If Equipped ......... 1 3 2 䡵 Rear W indow Features .................. 1 [...]

MIRRORS Inside Day/Night Mirror — If Equipped Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be[...]

Electric Remote-Control Mirrors The controls for the power mirr ors are located on the driver’s door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirr or to move. When finished adjusting the mirror , turn the control to the center [...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror . V a[...]

HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone?[...]

The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features. Refer to your cellular service pr ovider or the phone manuf[...]

• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command, when you are asked for it. For example, you can use the combined form voice com- mand ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two [...]

• www .jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing ⬙ and follow the audible prompts. • When prompted, after the voice on beep, say ⬙ Pair a Phone ⬙ and follow t[...]

from dialing invalid combination of numbers. For example, in USA, 234-567-890 is nine digits long, which is not a valid USA phone number - the closest valid phone number has ten digits. • The UConnect™ system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call/Dial by Saying a Name • Pr[...]

After you are finished adding an entry into the phone- book, you will be given the opportunity to add more phone numbers to the current entry or to r eturn to the main menu. The UConnect™ system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a s[...]

entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose. T o select one of the entries from the list, pr ess the ⬙ V oice Recognition ⬙ button while the UConnect™ system is playing the desired entry and say ⬙ Delete. ⬙ • After you enter the name, the UConnect?[...]

Phone Call Features The following features can be accessed thr ough the UConnect™ system if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way calling, this feature can be accessed through the UConnect™ system. Check with your cellular service provider for the featur es th[...]

T oggling Between Calls If two calls are in pr ogress (one active and one on hold), press the ’Phone’ button until you hear a single beep indicating that the active and hold status of the two calls have switched. Only one call can be placed on hold at one time. Conference Call When two calls are in pr ogress (one active and one on hold), press [...]

until the vehicle battery condition dictates cessation of the call on the UConnect™ system and transfer of the call to the mobile phone. • After ignition key is switched to off, a call can continue on the UConnect™ system for certain duration, after which the call is automatically transferred fr om the UConnect™ system to the mobile phone. [...]

the paired cellular phone to call the emer gency num- ber . This feature is only supported in the USA. NOTE: The emergency number dialed is based on the Country where the vehicle is pur chased (91 1 for USA and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. The UConnect™ system do[...]

Y ou can use your UConnect™ system to access a voice- mail system or an automated service, such as, paging service or automated customer service. Some services requir e immediate response selection, in some instances, that may be too quick for use of UConnect™ system. When calling a number with your UConnect™ system that normally requir es yo[...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measur es). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played throug[...]

Connect or Disconnect Link Between the UConnect™ System and Cellular Phone Y our cellular phone can be paired with many dif ferent electronic devices, but can only be actively ⬙ connected ⬙ with one electronic device at a time. If you would like to connect or disconnect the Blue- tooth™ connection between a UConnect™ paired cellular phone[...]

Delete UConnect™ Paired Cellular Phones • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • At the next prompt, say ⬙ Delete ⬙ and follow the prompts. • Y ou can also press the ⬘ V oice Recognition’ button anytime while the list is being played and th[...]

• Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • In a convertible vehicle, the system performance may be compromised with r oof top down. • Even though the system is designed for users speakin[...]

• Operation from driver seat. • In a convertible vehicle, the system performance may be compromised with r oof top down. • Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 89 3[...]

90 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 91 3[...]

North American English Primary Alternate(s) Zero One Tw o Three Four Five Six Seven Eight Nine Star (*) Plus (+) Pound (#) Add Location All Call Cancel Confirmation Prompts Continue Delete Dial Edit Emergency English Erase All Espanol Francais Help Home Language List names List phones Mobile Mute Mute off New entry No Pager 92 UNDERST ANDING THE FE[...]

Pair a phone Phone pairing Pairing Phonebook Phone book Previous Record again Redial Return to main menu Return. Main menu Select phone Select Send Set up Phone settings / Phone set up T owing assistance T ransfer call T ry again V oice training W ork Ye s General Information This device complies with part 15 of the FCC rules and RSS 210 of Industr[...]

SEA TS Front Seat Adjustment The adjusting bar is at the front of the seats, near the floor . Pull the bar up to move the seat to the desired position. Using body pressur e, move forward and rearwar d on the seat to be sure the seat adjusters have latched. W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement [...]

Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the ratcheting handle on the outboard side of the seat to adjust the driving position. Manual Lumbar— If Equipped The Lumbar adjustment is located on the outboard side of the driver’s seat. T o increase or decr ease support, rotate the han[...]

Driver’s Seat Back Recline T o recline: 1. Lean forward befor e lifting the handle, then lean back to the desired position and r elease the handle. 2. Lift the handle to return the seatback to an upright position. Adjustable Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Pull up or [...]

Heated Seats — If Equipped W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long per[...]

When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output then drops to the normal high-temperatur e level. If high-level heating is selected, the system will automati- cally switch to the low level after about 30 minutes of continuous o[...]

Folding Rear Seat T o provide additional storage ar ea, each rear seatback can be folded forward. Pull the strap forwar d to move the seat forward and flat. Front Passenger Seat Folded Flat Folding Rear Seat UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 99 3[...]

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, appr oximately 35 degrees maximum, and release the strap. Rear Seat Folded Flat Reclining The Rear Seat 100 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts • Be sure that everyone in your vehicle is in a [...]

Then move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop r od, clipped to the left side (right side facing hood) of the engine compartment, to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. T o prevent possible damage, [...]

NOTE: The lights will remain on until the switch is pressed a second time, so be sur e they have been turned off befor e leaving the vehicle. They will not turn off automatically . Multi-Function Control Lever The Multi-Function Control Lever contr ols the operation of the headlights, parking lights, turn signals, headlight beam selection, instrume[...]

T o change the brightness of the instrument panel lights, rotate the center portion of the Multi-Function Contr ol Lever up or down. Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF , a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog ligh[...]

T urn Signals Move the Multi-Function Control Lever up or down and the arrows on each side of the instr ument cluster flash to show proper operation of the fr ont and rear turn signal lights. Y ou can signal a lane change by moving the lever partially up or down without moving beyond the detent. If either light remains on and does not flash, or the[...]

Passing Light Y ou can signal another vehicle with your headlights by lightly pulling the Multi-Function Control Lever towar d you. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. NOTE: If the Multi-Function Control Lever is held in the flash to pass position for more than 15 seconds, the high beam[...]

Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray fr om a passing vehicle. As long as the lever is held down, the wipers will continue to operate. CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off [...]

Windshield Wiper Operation T urn the end of the handle to select the desired wiper speed. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the knob upward (clockwise) to decrea[...]

W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over th[...]

T o Activate: Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. T o turn the system OFF , push the ON/OFF button a second time. The CRUISE indicator will turn off. The system should be turned OFF when not in use. W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could a[...]

T o decrease speed while speed contr ol is ON, push down and hold “SET DECEL”. Release the lever when the desired speed is r eached, and the new speed will be set. T apping the “SET DECEL” button once will result in a 1 mph (2 km/h) speed decrease. Each time the button is tapped, speed decreases. Manual T ransaxle: Depressing the clutch ped[...]

GARAGE DOOR OPENER — IF EQUIPPED NOTE: The HomeLink 威 system will be disabled if the V ehicle Theft Alarm (if equipped) is in the Armed or Alarming state. The HomeLink 威 system will only operate when the V ehicle Theft Alarm (if equipped) is in the Disarmed mode. The HomeLink 威 Universal T ransceiver replaces up to three r emote controls (h[...]

W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards. This includes most garage door opener mod- els manufactured after [...]

3. Choose one of the three Universal T ransceiver buttons to program. Place the hand held contr oller one to three inches from the Universal T ransceiver while keeping its indicator light in view . 4. Using both hands, pr ess the hand held transmitter button and the desired Universal T ransceiver button. Do not release the buttons until step 5 has [...]

On garage door openers with the “Rolling Code” feature, the transmitter code changes after each use to prevent the copying of your code. T o check if your device is protected by a “Rolling Code” system: • Check the owner’s manual for the device for mention of “Rolling Codes”. • Press and hold the pr ogrammed button on the Univer- [...]

Canadian Programming/Gate Programming Canadian frequency laws, and the technology of some entry gates, requir e you to press and release the hand held transmitter button every two seconds during pro- gramming. Continue to press and hold the Universal T ransceiver button while you press and r elease the hand held trans- mitter button until the frequ[...]

1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. HomeLink 威 is a[...]

ELECTRONIC BRAKE CONTROL SYSTEM - ABS/TCS/BAS/ESP — IF EQUIPPED If your vehicle is equipped with the advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), T raction Control System (TCS) Brake Assist System (BAS), and Electronic Stability Pr ogram (ESP). All four systems work together to enhance vehicle stability a[...]

W ARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too [...]

W ARNING! • Electronic Stability Program (ESP) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, a[...]

W ARNING! In the Partial ESP mode, the engine torque reduction and stability features are desensitized. Therefore, the enhanced vehicle stability offered by ESP is unavailable. NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand or gravel, it may be desirable to switch to the “Partial ESP?[...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the r eading lamp. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury[...]

OPENING SUNROOF – MANUAL T o open the sunroof, pr ess and hold the switch rearward to full open. Any release of the switch will stop the movement and the sunroof will r emain in a partial open condition until the switch is pushed and held rearwar d again. OPENING SUNROOF – EXPRESS MODE By pressing the switch r earward and r eleasing, the sun- r[...]

VENTING SUNROOF – EXPRESS Press and hold the “V” button, and the sunr oof will open to the vent position. This is called Express V ent, and will occur regar dless of the sunroof position. During Expr ess V ent operation, any movement of the switch will stop the sunroof. SUNSHADE OPERA TION The sunshade can be opened manually . However , the s[...]

W ARNING! T o A void Serious Injury or Death: • D on o tu s ea3- Prong Adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use, and while driving the vehicle • If this outlet is mishandled it may cause an electric shock and failure. Power Outlet 12 V olts UNDERST ANDING TH[...]

Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • • Accessorie[...]

CONSOLE FEA TURES W ARNING! Do not operate this vehicle with the console com- partment lid in the open position. Cell phones, music players, and other hand held electronic de- vices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury . The floor console’s slidin[...]

CARGO AREA FEA TURES Cargo Light/Removable Self- Recharging Flashlight – If Equipped The dual-function light is mounted in the headliner above the cargo ar ea to illuminate the cargo ar ea, and part of it snaps out of the bezel to serve as a flashlight when needed. The flashlight features two bright LED light bulbs and is powered by r echargeable[...]

Removing Flashlight Three Press Switch UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 129 3[...]

T onneau cover — If Equipped The cargo ar ea trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining r ear seat. W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on[...]

W ARNING! • Cargo tie-down Loops are not safe anchors for a child seat tether strap. In a sudden stop or colli- sion a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • The weight and position of cargo and passengers can change the vehicle center[...]

Fold Down Speakers – If Equipped When the liftgate is open, the speakers can swing down of the trim panel to face rearwar d, for tailgating and other activities. REAR WINDOW FEA TURES Rear Window Wiper/W asher A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch [...]

If the rear wiper is operating when the ignition is turned OFF , the wiper will automatically return to the “Park” position if power accessory delay is active. Power acces- sory delay can be cancelled by opening the door , if this happens the rear wiper will stop at its curr ent position and will not go to park. Adding W asher Fluid The fluid r[...]

Rear Window Defroster CAUTION! Use care when washing the inside of the rear win- dow to prevent damage to heating elements. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Also, keep all objects a safe distance from the window to prevent damaging the heating elements. ROOF LUGGAGE RACK — IF EQUIPPED An optio[...]

T o operate the beverage cooler , pull the slide control about 1/2 inch (12 mm) toward the passenger compart- ment. This will allow cool air to enter the beverage cooler . T o shut off the beverage cooler when not in use, push the slide control back 1/2 inch (12 mm). This will pr event cool air from entering the passenger compartment when in heat m[...]

V ehicles without air conditioning can use that space for storage. The lower bin holds the owner ’s manual and other important documents. Another storage bin is lo- cated on the outboard side of the steering wheel can hold small items like parking cards for easy access. Slide Control Movement 136 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 4 1 䡵 Instrument Cluster—Base ................ 1 4 2 䡵 Instrument Cluster—Pr emium ............ 1 4 3 䡵 Instrument Cluster Descriptions ........... 1 4 4 䡵 Electronic V ehicle Information Center (EVIC) – If Equipped ................... 1 5 [...]

䡵 Electronic Digital Clock ................. 1 6 1 ▫ Clock Setting Procedur e................. 1 6 2 䡵 Sales Code REF — AM/FM/CD (Single Disc) Radio W ith Optional Satellite Radio And Hands Free Phone Capability .... 1 6 2 ▫ Operating Instructions - Radio Mode ....... 1 6 3 ▫ Operation Instructions - CD Mode ......... 1 6 6 ▫ Operatio[...]

▫ T a p e E j e c t........................... 1 8 4 ▫ Scan Button ......................... 1 8 5 ▫ Changing T ape Direction ................ 1 8 5 ▫ Metal T ape Selection ................... 1 8 5 ▫ Pinch Roller Release ................... 1 8 5 ▫ Noise Reduction ...................... 1 8 5 ▫ Operation Instructions - (CD Mode For C[...]

䡵 Remote Sound System Controls — If Equipped .......................... 1 9 6 ▫ Radio Operation ...................... 1 9 6 ▫ CD Player .......................... 1 9 7 䡵 CD/DVD Disc Maintenance .............. 1 9 7 䡵 Radio Operation And Cellular Phones ....... 1 9 8 䡵 Climate Controls ...................... 1 9 8 ▫ Climate Control[...]

INSTRUMENT P ANEL FEA TURES UNDERST ANDING YOUR INSTRUMENT P ANEL 141 4[...]

INSTRUMENT CLUSTER—BASE 142 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER—PREMIUM UNDERST ANDING YOUR INSTRUMENT P ANEL 143 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Reminder This is a reminder that the Fuel Filler Door is located on the left side of the vehicle. 3. T emperature Gauge The temperature gauge shows engine coolant temperature.[...]

6. Low Fuel Light When the fuel level drops to 2 gallons, the fuel symbol will light and a single chime will sound. 7. Charging System Light This light shows the status of the electrical charging system. The light should come on briefly when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or comes[...]

12. Engine T emperature W arning Light This light warns of an overheated engine con- dition. If the engine is critically hot, a warning chime will sound 10 times. After the chime turns off, the engine will still be critically hot until the light goes out. Refer to “T emperature Gauge’ later in this section for steps that you can take to slow do[...]

off for 60 seconds when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and r eset. If this indicator comes on, the entire PRNDL/odometer display will brighten to FULL DA YTIME INTENSITY and will not be dimmable. CAUTION! The TPMS has been optimized for the original equipment tires a[...]

16. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission control systems. The light will illuminate when the key is in the ON/RUN position before engine start. If the bulb does not come on when turning the key from OFF to ON/RUN, have the condition chec[...]

The light will come on when the ignition switch is first turned on and remain on briefly as a bulb check. This is normal. If the light does not come on during starting, have the system checked by an authorized dealer . 20. Electronic Stability Pr ogram (ESP) Indicator Light/T raction Control System (TCS) Indicator Light — If Equipped If this indi[...]

When lit solid: There is an A WD system fault. A WD performance will be at a reduced level. Service the A WD system soon. When blinking: The A WD system is temporarily dis- abled due to overload condition. 25. Anti-Lock W arning Light (ABS) — If Equipped This light monitors the Anti-Lock Brake Sys- tem (ABS) described elsewhere in this manual. Th[...]

indicated by the Brake W arning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until the cause is corr ected. NOTE: The light may flash momentarily during sharp cornering maneuvers which change fluid level condi- tions. The vehicle should have service performe[...]

29. Electronic V ehicle Information Center Display—If Equipped When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages. 30. T ransmission Over T emp Light During sustained high speed driving on hot days, the automatic transaxle oil may be- come too hot. If this happens, the transmis- si[...]

The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the lower left part of the cluster below the fuel and engine tem- perature gauge. The EVIC consists of the following: • System Status • V ehicle information warning message displays • Personal Settings (customer programmable featur es[...]

• Headlamps On • Key In Ignition • Check TPM System EVIC Functions Press the EVIC button until one of the following func- tions are displayed on the EVIC: • Compass/T emperature/Audio • A verage Fuel Economy • Distance T o Empty (DTE) • Elapsed T ime • T ire Pressur e Monitor (TPM) • Personal Settings T o Reset The Display Pressin[...]

A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel r eading before the r eset. Distance T o Empty (DTE) Shows the estimated distan[...]

Language When in this display you may select differ ent languages for all display nomenclature, including the trip functions. Pressing the EVIC button while in this display selects English, Espanol, Deutsch, Italiano, or Francais depend- ing on availability . As you continue the displayed infor - mation will be shown in the selected language. NOTE:[...]

Flash Lights with Remote Key Lock When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked using the remote keyless entry transmitter . This feature may be selected with or without the sound horn on lock feature selected. Press and hold the EVIC button when in this display until “ON” or “OFF” ap[...]

Confirmation of V oice Commands — If Equipped When ON is selected all voice commands from the U-Connect system are confirmed. Pr ess and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. Display English or Metric The EVIC, odometer , and navigation system units can be changed between English and[...]

T o set the variance: with the ignition in the ON position, with a short button press (less than one second) pr ess and release the EVIC button several times until you have displayed the Personal Settings (Customer Program- mable Features) menu. Once in the Personal Settings (Customer Programmable Featur es) menu, press and release (less than one s[...]

Compass Calibration The Compass will automatically calibrate if the Cal indicator is flashing, by driving around slowly (under 5 mph / 8 km/h) in one or more complete cir cles in an area free fr om large metallic objects or power lines, until the Cal indicator turns off. If during normal use the compass appears erratic, inaccurate or abnormal, you [...]

T wo T ypes of Signals There ar e two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary ... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound. Electrical Disturbances Radio waves may pick up electrical d[...]

Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side T une / Audio control. 3. After the hours are adjusted, pr ess the right side T une / Audio control to set the minutes. 4. Adjust the minutes using the right side T une / Audio control. 5. T o exit, press any button/knob or[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) i[...]

(if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button causes the tuner to scan through pr eset stations in either , AM, FM, or Satellite (if equipped) frequencies, pausing for 5 seconds at each pre[...]

Press the r otary TUNE control a thir d time and TREB will display . T urn the TUNE control to the right or left to increase or decr ease the T reble tones. Press the r otary TUNE control a fourth time and BAL will display . T urn the TUNE control to the right or left to adjust the sound level from the right or left side speakers. Press the r otary[...]

Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display . If the vol[...]

TIME Button (CD Mode) Press this button to change the display fr om elapsed CD playing time to time of day . The time of day will display for 5 seconds. R W/FF (CD Mode) Press and hold the FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . RND/SET Button (Rando[...]

MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound fr om the speakers. ⬙ MUTE ⬙ will display . Press the MUTE button a second time and the sound from the speakers will r eturn. Rotating the volume control or turning OFF the ignition will also return the sound fr om the speakers. SCAN Button (Auxiliary Mode) No function. EJEC[...]

SALES CODE RAQ – AM/FM/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, AND VEHICLE ENTERT AINMENT SYSTEMS (VES) CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radi[...]

SEEK Button (Radio Mode) Press and r elease the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion. Holding the button will bypass station[...]

5. T o exit, press any button/knob or wait 5 seconds. R W/FF (Radio Mode) Pressing the r ewind/fast forward button causes the tuner to search for the next fr equency in the direction of the arrows. This featur e operates in either AM, FM or Satel- lite (if equipped) frequencies. TUNE Control (Radio Mode) T urn the right side rotary contr ol clockwi[...]

T oggle the PTY button to select the following format types: Program T ype 16 Digit-Character Dis- play No program type or un- defined None Adult Hits Adult_Hits Alert Alert Alert Alert Classical Classical Classic Rock Classic_Rock College College Country Country Emergency T est Emergency T est Foreign Language Foreign_Language Information Informat[...]

SET/DIR Button (Radio Mode) — T o Set the Push-Button Memory When you are r eceiving a station that you wish to commit to push-button memory , press the SET/DIR button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and r elease that button. If a button is not selected w[...]

CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the d[...]

Radio display will show ⬙ LOADING DISC ⬙ when the disc is loading, and “READING DISC” when the radio is reading the disc. LOAD / EJT - Eject Press the LOAD/ EJT button and the push- button with the corresponding number wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJ[...]

Press the SEEK button to move to the next randomly selected track. Press and hold the FF button to fast forwar d through the tracks. Release the FF button to stop the fast forward feature. Press the RND button a second time to stop Random Play . B u t t o n s1-6( C D MODE for CD Audio Play) Selects disc position s1-6f o rP l ay/Load/Eject. Notes On[...]

writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recog[...]

Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of di[...]

the radio will play the next CD afte ra2m i n u t et i meout. If the CD is removed and ther e are no other CD’s in the radio, the radio will remain in CD mode and display ⬙ INSER T DISC” for 2 minutes. After 2 minutes the radio will go to the previous tuner mode. MSG or INFO Button (CD Mode for MP3 Play) Press and MSG or INFO button while pla[...]

Operating Instructions - V ideo Entertainment System (VES 威 ) (If Equipped) Refer to separate V ideo Entertainment System (VES 威 ) Guide. SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your ra[...]

Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping. T urning the volume control to the right incr eases the volume and to the left decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played. Mode Button (Radio Mode) Pre[...]

INFO Button (Radio Mode) Press the INFO button for an RBDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast (if available) fr om an FM station (FM mode only). R W/FF (Radio Mode) Pressing the r ewind/fast forward button causes the tuner to search for the next fr equency in the direction of the arrows.[...]

within 5 seconds will allow the program format type to be selected. Many radio stations do not currently br oad- cast PTY information. T urn the tune knob to select the following format types: Program T ype 16 Digit-Character Dis- play No program type or un- defined None News News Information Information Sports Sports Ta l k Ta l k Rock Rock Classi[...]

NOTE: If you have selected a PTY with the tune knob, simply pressing the tune button in will go dir ectly to a “PTY seek”. B u t t o n s1-6( Radio Mode) These buttons tune the Radio to the stations that you commit to push-button memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}. Operating Instructions — T ape Player Insert the ca[...]

Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the featur e. Changing T ape Direction If you wish to change the direction of tape travel (side being played), press Pr eset 6. The lighted arrow in the display window will show the new direction. Metal T ape Selection If a standard met[...]

Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. T[...]

Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. Press and hold the LOAD/EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not r emoved, the radio will contin[...]

Press and hold the FF button to fast forwar d through the tracks. Release the FF button to stop the fast forward feature. If the R W button is pressed, the current track will reverse to the beginning of the track and begin playing. Press the RND button a second time to stop Random Play . B u t t o n s1-6( C D MODE for CD Audio Play) Selects disc po[...]

Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the Disc at Once option before writing to the disc. Operation Instructions - (CD Mode for MP3 and WMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressing the right side of the SEEK button plays [...]

INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode. Press and hold the INFO button while in the message dis[...]

Operating Instructions - V ideo Entertainment System (VES) (If Equipped) Refer to separate “V ideo Entertainment System (VES) Guide.” SALES CODE REC — AM/FM/CD (6–DISC) RADIO WITH NA VIGA TION SYSTEM Satellite Navigation Radio with CD Player with MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with an int[...]

SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio. This service offers over 100 channels of music, sports, news, entertainment, and programming for chil- dren, dir ectly from it[...]

simultaneously for 3 seconds. All twelve ESN/SID num- bers will be displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed. ESN/SID Access W ith Navigation Radios Please refer to your Navigation User’s Manual. Selecting Satellite Mode in REF [...]

Storing and Selecting Pre-Set Channels In addition to the 12 AM and 12 FM pre-set stations, you may also commit 12 satellite stations to push button memory . These satellite channel pre-set stations will not erase any AM or FM pr e-set memory stations. Follow the memory pre-set pr ocedures that apply to your radio. Using the PTY (Program T ype) But[...]

• Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches.[...]

CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play . If you press the switch up or down twice it plays the second track, thre[...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

The controls ar e as follows: Fan Control Use this control to r egulate the amount of air forced through the system in any mode you select. The fan speed increases as you move the control to the right fr om the OFF position. Mode Control (Air Direction) The mode control allows you to choose from several pat- terns of air distribution. Y ou can sele[...]

heat at the windshield. This setting is good for main- taining comfort while reducing moistur e on the wind- shield. Defrost Air is directed thr ough the windshield and side window demist outlets. Use this mode with maximum fan and temperature settings for best wind- shield and side window defrosting. NOTE: The air conditioning compressor operates [...]

Air Conditioning Use this button to engage the Air Conditioning. A lamp will illuminate when the Air Con- ditioning System is engaged. NOTE: The air conditioning compressor will not en- gage until the engine has been running for about 10 seconds. MAX A/C For maximum cooling use the A/C and recir culate buttons at the same time. UNDERST ANDING YOUR [...]

Circulation Control Use this button to choose be- tween outside air intake or recir culation of the air inside the vehicle. A lamp will illu- minate when you are in r ecir- culate mode. Only use the re- circulate mode to temporarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start up in very hot or hum[...]

Operating Tips UNDERST ANDING YOUR INSTRUMENT P ANEL 203 4[...]

W indow Fogging V ehicle side windows tend to fog on the inside in mild rainy or humid weather . T o clear the windows, set mode to the mix or defrost position. Dir ect the panel outlets toward the side windows. Do not use r ecirculate without A/C for long periods as fogging may occur . Interior fogging on the windshield can be quickly re- moved by[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 0 8 ▫ Automatic T ransaxle ................... 2 0 8 ▫ Manual T ransaxle ..................... 2 0 8 ▫ Normal Starting ...................... 2 0 8 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ................ 2 0 9 ▫ If Engine Fails T o Start ..[...]

䡵 Brake System ......................... 2 1 9 ▫ Anti-Lock Brake System (ABS) — If Equipped ......................... 2 2 0 䡵 Power Steering ........................ 2 2 3 䡵 Driving On Slippery Surfaces ............. 2 2 4 ▫ Acceleration ......................... 2 2 4 ▫ T raction ............................ 2 2 4 䡵 T ire Safety In[...]

▫ Gasoline Engines ..................... 2 4 8 ▫ Reformulated Gasoline ................. 2 4 9 ▫ Gasoline/Oxygenate Blends .............. 2 4 9 ▫ MMT In Gasoline ..................... 2 4 9 ▫ Materials Added T o Fuel ................ 2 5 0 ▫ Fuel System Cautions .................. 2 5 0 ▫ Carbon Monoxide W arnings .............. 2 5 1[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in [...]

start within 15 seconds, turn the ignition switch to the “OFF” position, wait 10 to 15 seconds, then repeat the normal starting procedur e. W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started this way . Unburned fuel could enter the catalytic converter and on[...]

CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. AUTOMA TIC TRANSAXLE — IF EQUIPPED NOTE: The Continuously V ariable Automatic T ransaxle (CVT) changes ratios in a co[...]

CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or NEUTRAL into any forward gear[...]

allows you to insert your finger to override the system. If this occurs obtain service as soon as possible. Automatic T ransaxle Ignition Interlock System This system prevents the key fr om being removed unless the shift lever is in P ARK. It also prevents shifting out of P ARK unless the key is in the ACC or ON positions, and the brake pedal is de[...]

• When shifting into P (Park), firmly move the lever all the way forward until it stops. • Look at the shift indicator window on the console to ensure it is in the P (Park) position. • Y ou must depress the brake pedal to move the shift lever out of the P (Park) position. CAUTION! Before moving the shift lever out of P (Park), you must turn t[...]

NOTE: After pushing beyond the detent (bump/step) and entering “maximum performance” mode, the CVT will no longer operate in the economy mode, but will increase the engine speed up to 6000 RPM. The engine speed will remain at this high RPM while the vehicle accelerates. AUTOSTICK — IF EQUIPPED Autostick is a driver-interactive transmission th[...]

ratio. After Autostick is activated, the manual ratio selected is displayed in the transmission ratio display and tipping the lever to the (+) or (-) direction will cause an upshift or downshift by one ratio. Autostick is deactivated: • By holding the lever to (+) momentarily . • When the shift lever is shifted out of ⬙ D. ⬙ • When in 6 p[...]

Fully depress the clutch pedal befor e you shift gears. As you release the clutch pedal, lightly depr ess the accelera- tor pedal. Use each gear in numerical order - do not skip a gear . Be sure the transaxle is in FIRST gear , (not THIRD), when starting from a standing position. Damage to the clutch can result fr om starting in THIRD. For most cit[...]

Downshifting Proper downshifting will impr ove fuel economy and prolong engine life. CAUTION! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch. T o maintain a safe speed and prolong brake life, shift down to 2nd or 1st when descending a steep grade. When[...]

P ARKING BRAKE When the parking brake is applied with the ignition on, the Brake Light in the instrument cluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle is moving, a chime will sound to alert the driver . The chime wil[...]

W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully diseng[...]

malfunction is caused by an internal leak, as the brake fluid in the master cylinder drops, the brake warning indicator will light. W ARNING! Driving a vehicle with the brake light on is danger- ous. A significant decrease in braking performance or vehicle stability during braking may occur . It will take you longer to stop the vehicle or will make[...]

W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed in tur[...]

ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops. Y ou also may experience the following when the brake system goes into Anti-lock: • The ABS motor running (it may continue to run for a short time after the stop[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the front wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the front (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is dan[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d ha[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = [...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If th[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the [...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Load[...]

6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: The following table shows examples on how to calculate total load, cargo/luggage, and towing capaci- ties of your vehicle wit[...]

232 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabili[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as[...]

W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires W ARNING! Combining radial ply tires with other types of [...]

Do not install a wheel cover or attempt to mount a conventional tire on the compact spar e wheel, since the wheel is designed specifically for the compact spare. Do not install more than one compact spar e tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) for more than 30 seconds continuously when you are stuck, and don’t let anyone near a spinning wheel, no matter w[...]

Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose con[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle. This can cause unpredictable handling and stress to steeri[...]

TIRE PRESSURE MONITORING SYSTEM (TPMS) — IF EQUIPPED Base Tire Pressure Monitoring System (TPMS) Operation – If Equipped This is the T ire Pressur e Monitoring System warn- ing indicator located in the instrument cluster . • The T ire Pressur e Monitoring System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recommen[...]

sufficiently low enough to turn ON the “T ire Pr essure Monitoring Light”. Driving the vehicle may cause the tire pressur e to rise to approximately 30 psi (207 kPa), but the “T ire Pressur e Monitoring Light” will still be ON. In this situation, the “T ire Pressur e Monitoring Light” will turn OFF only after the tires have been inflate[...]

Display Settings • Y our system can be set to display pressur e units in PSI, kPa, or BAR. NOTE: These display settings may not be available due to Regulatory Authorities. In this case, the display will only show approved units. NOTE: A low spare tire will not cause the T ire Pr essure Monitoring T elltale Lamp to illuminate or the chime to sound[...]

The EVIC will display the “CHECK TPM SYSTEM” message for 3 seconds. This text message is then followed by a graphic, with “- -“ displayed for the pressur e value indicating which of the T ire Pressur e Monitoring Sen- sor(s) is not being received. If the ignition key is cycled, this sequence will repeat, providing the system fault still exi[...]

“CHECK TPM SYSTEM” text message will be display in the EVIC, and the graphic display will have “- -“ in place of the pressur e value of the spare tir e location. Once the original road tir e has been properly repair ed, and put back onto the vehicle in place of the compact spare tir e. The TPMS will update the graphic display on the EVIC wi[...]

NOTE: • The TPMS is not intended to replace normal tir e care and maintenance, or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failur e. Under-i[...]

TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country r equire the use of snow tir es during winter . Standard tir es are of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire sid[...]

Follow the recommended tir e rotation frequency for your type of driving found in the “Maintenance Schedules” Section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected befor e rotating. The suggested rotation method is the “forwar d-cross” shown in the diagram[...]

Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “Reformulated Gasoline”. Reformulated gasolines contain oxygenates, and are spe- cifically blended to reduce vehicle emissions and im- prove air quality . The manufacturer supports the use of r eformulated gaso- lines. Properly blended r[...]

content of gasoline may not be indicated on the pump, you should ask your gasoline retailer whether or not his/her gasoline contains MMT . It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California r eformu- late[...]

• The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting fr om the use of such fuels or additives is not the responsibility of the manufactur er . NOTE: Intentional tampering with emissio[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door , on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the r eplacement cap is for use with this vehicle. CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (g[...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and will cause the malfunction indi- cator light to turn on. NOTE: T ighten the gas cap about 1/4 turn until you hear[...]

CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. W ARNING! • Never add fuel when the engine is running. • Never have any smoking materials lit in or near the vehicle when the fuel cap is removed or the[...]

TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer car efully re- view this information to tow your load as efficiently and safely as possible. T o maintain warranty coverage, follow the requir ements and recommendations in this ma[...]

W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The downward for ce exerted on the hitch ball by the trailer . In most cases it should not be less than 10% or more[...]

T railer Hitch Classification Class Max. GTW (Gross T railer Wt.) C l a s sI-L i g h t Duty 2,000 lbs (907 kg) Class II - Medium Duty 3,500 lbs (1587 kg) Class III - Heavy Duty 5,000 lbs (2268 kg) Class IV - Extra Heavy Duty 10,000 lbs (4540 kg) All trailer hitches should be professionally installed on your vehicle. T railer T owing Weights (Maximu[...]

Note 1 – The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight refer enced on the T ire and Loading Information placard. Refer to the T ire– Safety Information Section in this manual. T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight i[...]

must be considered as part of the total load on your vehicle. Refer to the T ire and Loading Information plac- ard in the T ire Safety Information Section of this manual for the maximum combined weight of occupants and cargo for your vehicle. T owing Requirements T o promote pr oper break-in of your new vehicle driv- etrain components the following[...]

• V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. W ith a manual transmission, shift the transmission into reverse. Always, block or ⬙ chock ⬙ the trailer wheels. • GCWR must not be exceeded. • T otal weight must be[...]

T owing Requirements — T railer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer . This could cause inadequate braking and possible personal injury . − An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. Wh[...]

T owing Requirements — T railer Lights & W iring Whenever you pull a trailer , regar dless of the trailer size, stop lights and turn signals on the trailer are r equired for motoring safety . The T railer T ow Package may includ ea4a n d7p i n wiring harness. Use a factory approved trailer harness and connector . NOTE: Do not cut or splice wi[...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain o[...]

− Refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion. RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle (Flat towing with all four wheels on the ground) CAUTION! DO NOT FLA T TOW any continuously variable AUTOMA TIC TRANSAXLE (CVT) equipped ve- h[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 2 6 6 䡵 If Y our Engine Overheats ................ 2 6 6 䡵 Automatic T ransaxle Overheating .......... 2 6 7 䡵 Jacking And T ire Changing ............... 2 6 8 ▫ Jack Location ........................ 2 6 8 ▫ Spare T ire Stowage .................... 2 6 8 ?[...]

HAZARD W ARNING FLASHER The flasher switch is located on the instrument panel, below the radio. Depress the switch and both cluster indicators and all front and r ear directional signals will flash. Depr ess the switch again to turn Hazard W arning Flashers off. Do not use this emergency warning system when the vehicle is in motion. Use it when you[...]

removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control to High. This allows the heater cor e to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature g[...]

JACKING AND TIRE CHANGING W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a ser[...]

Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in P ARK (automatic transaxle) or REVERSE (manual transaxle). T urn OFF the ignition. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the[...]

CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3. 3. There ar e two front jacking locations and two rear jacking locations on each side of the body . The front locations are outlined by two triangular cutouts, the r ear ones by two rectangular cutouts. For vehicles equipped with plastic trim,[...]

W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling original wheel, pr operly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel nuts. 7. Lower the veh[...]

JUMP-ST ARTING PROCEDURES DUE TO A LOW BA TTER Y W ARNING! T ake care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. Y ou can be hurt by the fan. W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started t[...]

3. T urn off the heater , radio and all unnecessary electrical loads. 4. Remove the air intake duct covering the battery , using the two finger screws on the cover . 5. Connect one end of a jumper cable to the positive terminal of the booster battery . Connect the other end of the jumper cable to the positive terminal of the dis- charged battery . [...]

8. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery . 9. When removing the jumper cables, r everse the se- quence exactly . Be careful of the moving belts and fan. FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with T raction[...]

TOWING A DISABLED VEHICLE With Ignition Key Automatic And Manual T ransaxle Front-wheel-drive vehicles must have the fr ont wheels elevated; all-wheel-drive vehicles must be hauled on a flatbed truck. All T ransaxles CAUTION! If the vehicle being towed requires steering, the ignition switch must be in the ACCESSOR Y posi- tion, not in the LOCK posi[...]

Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the r ear wheels are raised. Proper towing equipment is necessary to pr event dam- age to the vehicle. Battery power is requir ed to release the brake/ transmission interlock system. [...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — Gasoline Engines ... 2 7 9 䡵 Onboard Diagnostic System — OBD II ...... 2 8 0 ▫ Loose Fuel Filler Cap Message ............ 2 8 0 䡵 Emissions Inspection And Maintenance Programs .................. 2 8 1 䡵 Replacement Parts ..................... 2 8 2 䡵 Dealer Service ..........[...]

▫ Cooling System ....................... 2 9 4 ▫ Hoses And V acuum/V apor Harnesses ....... 2 9 8 ▫ Fuel System Connections ................ 2 9 8 ▫ Brake System ........................ 2 9 8 ▫ Automatic T ransaxle (Cvt) ............... 3 0 1 ▫ Manual T ransaxle ..................... 3 0 2 ▫ Rear Drive Assembly (Rda )– A WD/4WD Mod[...]

ENGINE COMP ARTMENT — GASOLINE ENGINES MAINT AINING YOUR VEHICLE 279 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems ar e oper- ating properly , your vehicle will provide excellent per - formance and fuel economy , as w[...]

This might indicate a damaged cap. If the problem is detected twice in a row , the system will turn on the Malfunction Indicator Light (MIL). Resolving the prob- lem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions contro[...]

b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station. If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance servic[...]

The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect r eading. Checking the oil while the vehicle is on level ground and only when the engine is[...]

• T railer towing. • T axi, Police or delivery service (commercial service). • Off-Road or desert operation. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow schedule “B—All Engines” of the ⬙ Maintenance Schedules ⬙ section of this manual. If n[...]

such a product, use only those oils that ar e American Petroleum Institute (API) Certified and have the r ecom- mended SAE viscosity grade. Follow the maintenance schedule that describes your driving type. Materials Added T o Engine Oils The manufacture str ongly recommends against the addi- tion of any additives (other than leak detection dyes) to[...]

plug. Refer to the Engine data Label located under the hood for the proper type of spark plug for use in your vehicle. Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic co[...]

In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest sever e and abnormal catalyst overheating. If this occurs, stop the vehicle, turn off the engine and allow it to cool. Service, including a tune up to manufacturers specifica- tions, should be obtained immediately . T o minimize the possibility of [...]

W ARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed. Failure to do so can result in serious personal injury [...]

CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion. Apply[...]

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluor ocar- bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and r ecycling equ[...]

Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, liftgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against r ust and wear . Prior to the appli- cation of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubric[...]

checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze). Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system, or if exhaust fumes can be detect[...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

CAUTION! Mixing of coolants other than specified Hybrid Or- ganic Additive T echnology (HOA T) engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is intro- duced into the cooling system in an emergency , it should be replaced with the specified coolant as soon as possible. Do not use plain wat[...]

Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cording to the temperatur es occurring in the area wher e the vehicle is operated. NOTE: Mixing coolant types will decrease the life of the engine coolant and will requir e more frequent coolant changes. Cooling System Pressure Cap[...]

ground. If ingested by a child, contact a physician immediately . Clean up any ground spills immediately . Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. W ith the engine idling and warm to normal operating tempera- ture, the level of the coolant in the bottle should be between th[...]

• Make sure that the radiator and coolant r ecovery bottle overflow hoses are not kinked or obstr ucted. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If replacement is ever necessary , insta[...]

W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou wouldn’t have your full braking capacity in an emergency . Brake And Power Steering System Hoses When [...]

Brake Master Cylinder The fluid level in the master cylinder should be checked when performing under hood services, or immediately if the brake system warning lamp is on. Be sure to clean the top of the master cylinder ar ea before removing the cap. If necessary , add fluid to bring the fluid level up to the requir ements described on the brake flu[...]

W ARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter . Do not allow petroleum based fluid to contaminate the brake fluid as seal damage will result! Automat[...]

Manual T ransaxle Lubricant Selection Use only manufacturers r ecommended transmission fluid. Refer to Fluids, Lubricants and Genuine Parts for correct fluid type. Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more that 3/16” (4.7 mm) below the bott[...]

Power T ransfer Unit (PTU) – A WD/4WD Models Only Lubricant Selection Use only manufacturers r ecommended fluid. Refer to Fluids, Lubricants and Genuine Parts for correct fluid type. Fluid Level Check V isually inspected the unit at each oil change for leakage. If leakage is detected, Check the fluid level by removing the fill plug. The fluid lev[...]

• Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near sea coast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using Mopar Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insect[...]

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials ar e well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use Mopar touch up paint on scratches as soon as possible. Y our dealer has touch up paint to match the co[...]

Mopar T otal Clean is specifically recommended for leather upholstery . Y our leather upholstery can be best preserved by r egular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed pr omptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth[...]

the elements. When cleaning the rear view mirr or , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirr or . Instrument Panel Cover The instrument panel cover has a low glar e surface which minimizes reflections in the windshield. Do not use protectants or other pr oducts which may cause undesir- able ref[...]

Cavity Cartridge Fuse Mini Fuse Description 1 Empty Empty 2 15 Amp Lt. Blue A WD/4WD ECU Feed 3 10 Amp Red CHMSL Brake Switch Feed 4 10 Amp Red Ignition Switch Feed 5 20 Amp Y ellow T railer T ow 6 10 Amp Red IOD Sw/Pwr Mir/ Ocm Steering Cntrl Sdar/Hands Free Phone 7 30 Amp Green IOD Sense1 8 30 Amp Green IOD Sense2 9 40 Amp Green Power Seats Cavit[...]

Cavity Cartridge Fuse Mini Fuse Description 20 15 Amp Lt. Blue IOD Feed Radio 21 10 Amp Red IOD Feed Intrus Mod/Siren 22 10 Amp Red IGN RUN Heat/AC/ Compass Sensor 23 15 Amp Lt. Blue ENG ASD Relay Feed 3 24 15 Amp Lt. Blue Power Sunroof Feed 25 10 Amp Red Heated Mirror 26 15 Amp Lt. Blue ENG ASD Relay Feed 2 27 10 Amp Red IGN RUN Only ORC Feed 28 1[...]

CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical sys- tem failure. • When replacing a blown fuse, it is important to use only a fuse having t[...]

LIGHTS BULBS — Outside Bulb No. Low Beam/High Beam Headlight ............ H 1 3 Front Park/T urn Signal/Side Marker Light ....................... 3157NAK Front Fog Light ......................... 9145 Center High Mounted Stop Light (CHMSL) .................. L E D Assembly Rear T ail/Stop .......................... 3157 Rear T urn Signal ........[...]

T ail Lights, Rear T urn Signals And Backup Lights — Replacement 1. Remove the two push-pins from the tail light housing. Removing Push-Pins Push-Pins Removed 312 MAINT AINING YOUR VEHICLE[...]

2. Grasp the taillamp and pull firmly to disengage the lamp from the apertur e panel. 3. T wist and remove socket from lamp. Pulling Lamp From Body Removing Socket and Bulb MAINT AINING YOUR VEHICLE 313 7[...]

4. Remove bulb from socket and r eplace. License Lights 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp fr om the liftgate. Removing Bulb From Socket Prying Lamp from Liftgate 314 MAINT AINING YOUR VEHICLE[...]

2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. Center High-Mounted Stoplight Light is an LED assembly . See your authorized dealer for replacement. Removing Socket from Lamp Removing Bulb From Socket MAINT AINING YOUR VEHICLE 315 7[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 13.5 Gallons 51.0 Liters Engine Oil-W ith Filter All Gasoline Engines (Use API Certified SAE 5W -20 Engine Oil.) 4.5 Quarts 4.26 Liters Cooling System * Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Miles Formula), or equivalent. 7.2 Quarts 6.8 Liters * Includes heater and coolant recovery bottle[...]

FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting Daiml[...]

Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransaxle (CVT) Fluid Mopar 威 CVTF + 4 Manual T ransaxle Fluid Mopar 威 A TF+4 MS9602 Rear Drive Assembly (RDA) Mopar 威 Gear & Axle Lubricant SAE 80W -90 API GL 5 or equivalent non- synthetic product. Power T ransfer Unit (PTU) Mopar 威 Gear & Axle Lubricant SAE 80W -9[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 3 2 0 䡵 Maintenance Schedules .................. 3 2 0 ▫ Schedule “B” ........................ 3 2 3 ▫ Schedule “A” ........................ 3 3 2 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first and follow schedule “B” of the ⬙ Maintenance Schedules ⬙ section of this manual. NOTE: If ANY of these apply to you then change your coolant every 102,000 miles (170 000 km) or 60 months, whichever comes first and f[...]

• Check the fluid levels of coolant reservoir , brake/ clutch master cylinder , and manual transaxle and add as needed. • Check all lights and all other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the exhaust system. • Inspect the brake hoses. • Inspect the CV joints (if equipped[...]

Schedule “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures ar e below 32 °F (0 °C). • Stop and go driving. • Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16 km). • More than 50% of your driving i[...]

Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000 ) (10 000 ) (15 000) (20 000) (25 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXX Rotate tires. X X Check spare tir e for proper pr essure and correct stowage. XX Inspect engine air cleaner filter , replace if neces- sary . X 324 SCHEDULE “B” [...]

Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXX Rotate tires. X X X Check spare tir e for proper pr essure and correct stowage. XX X Inspect brake linings. X Replace air cleaner filter . X Replace spark plugs. X[...]

Miles 33,000 36,000 39, 000 42,000 45,000 (Kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXX Rotate tires. X X Check spare tir e for proper pr essure and correct stowage. XX Inspect brake linings. X Inspect engine air cleaner filter , replace if neces- sa[...]

Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXX Change Automatic T ransaxle (CVT) Fluid and Filter X Change Manual T ransaxle Fluid. X Change Rear Drive Assembly (RDA) fluid. X Change Power T ransfer Unit (PTU)[...]

Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (110 000) (1 15 000) (120 000) (125 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXX Rotate tires. X X Check spare tir e for proper pr essure and correct stowage. XX Inspect brake linings. X Inspect engine air cleaner filter , replace if nece[...]

Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers ) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXX Rotate tires. X X X Check spare tir e for proper pr essure and correct stowage. XX X Inspect brake linings. X Replace engine air cleaner filter . X Replace s[...]

Miles 93,000 96,000 99,000 102,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. XXX X Change Manual T ransaxle Fluid. X Rotate tires. X X Check spare tir e for proper pr essure and correct stowage. X X Flush and replace engine coolant, if not done at 60 months. [...]

Miles 105,000 108,000 1 1 1,000 1 14,000 1 17,000 120,000 (Kilometers) (175 000) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , or at 3 months whichever comes first. X X XXXX Change Automatic T ransaxle (CVT) Fluid and Filter X Change Rear Drive Assembly (RDA) fluid. X Change Power T ransfer Unit (PTU) f[...]

Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000 ) (50 000) [Months] [6] [12] [18] [24] [30] Change engine oil and engine oil filter . X X X X X Rotate tires. X X X X X Check spare tir e for proper pr essure and correct stowage. X X XXX Inspect brake linings. X Inspect engine air cleaner filte[...]

Miles 36,000 42,000 48,000 54000 60,000 66,000 (Kilometers) (60 000) (70 000) (80 000) (90 000) (100 000) (1 10 000) [Months] [36] [42] [48] [54] [60] [66] Change engine oil and engine oil filter . X X X X X X Change Rear Drive Assembly (RDA) fluid. X Change Power T ransfer Unit (PTU) fluid. X Rotate tires. X X X X X X Check spare tir e for proper [...]

Miles 72,000 78,000 84,000 90,000 96,000 (Kilometers) (120 000) (130 000) (140 000) (150 000) (160 000) [Months] [72] [78] [84] [90] [96] Change engine oil and engine oil filter . X X X X X Rotate tires. X X X X X Check spare tir e for proper pr essure and correct stowage. X X XXX Inspect brake linings. X X Inspect engine air cleaner filter , repla[...]

Miles 102,000 108,000 1 14,000 120,000 (Kilometers) (170 000) (180 000) (190 000) (200 000) [Months] [102] [108] [1 14] [120] Change engine oil and engine oil filter . X X X X Change Rear Drive Assembly (RDA) fluid. X Change Power T ransfer Unit (PTU) fluid. X Rotate tires. X X X X Check spare tir e for proper pr essure and correct stowage. X X X X[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. 336 SCHEDULE “A” 8 M A I N T E N A N C E S C H E D U L E S[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle ....................... 3 3 8 ▫ Prepar e For The Appointment ............ 3 3 8 ▫ Prepar e A List ........................ 3 3 8 ▫ Be Reasonable W ith Requests ............. 3 3 8 䡵 If Y ou Need Assistance .................. 3 3 8 䡵 W arrant[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center . Any communication to the Manufacturer’s Customer Center should include the following [...]

Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er’s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer’s Service Contracts. If you purchased a manufactur er’s Service Contract, you will[...]

REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may[...]

Corporation vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, dia- grams, and charts. • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix p[...]

T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under contr olled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tir es depends upon th[...]

W ARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure. 344 IF YOU NEED CONSUMER ASSIST ANCE[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) ............. 2 2 0 Accelerator Pedal ....................... 2 1 3 Adding Engine Coolant (Antifreeze) ......... 2 9 5 Adding Fuel .......................... 2 5 2 Adding W asher Fluid ................. 108,133 Additives, Fuel ........................ 2 5 0 Air Cleaner , Engine (Engine Air Cleaner Filter) ..............[...]

B-Pillar Location ....................... 2 2 9 Brake Assist System ..................... 1 1 8 Brake Control System, Electr onic ........... 1 1 8 B r a k e F l u i d ........................... 3 1 8 Brake, Parking ......................... 2 1 8 Brake System ....................... 219,298 Anti-Lock (ABS) ................... 1 1 7 , 2 2 0 Hoses [...]

Child Restraint T ether Anchors ............. 5 7 Child Restraint with Automatic Belts ......... 5 6 Child Safety Locks ....................... 1 8 Child Seat ............................. 5 9 Clean Air Gasoline ...................... 2 4 9 Cleaning Wheels ............................. 3 0 5 Climate Control ........................ 1 9 8 C l o c k [...]

Engine Oil .......................... 2 8 6 Door Locks ............................ 1 4 Door Locks, Automatic ................... 1 6 Door Opener , Garage .................... 1 1 2 Downshifting .......................... 2 1 7 D r i v e B e l t s ............................ 2 8 6 Driver’s Seat Back T ilt .................... 9 6 Driving On Slip[...]

Fabric Care ........................... 3 0 5 Filler Location Fuel ..................... 1 4 4 Filters Air Cleaner .......................... 2 8 8 Engine Fuel ......................... 2 8 8 Engine Oil ....................... 286,317 Flashers .............................. 2 6 6 Hazard W arning ...................... 2 6 6 T urn Signal ...........[...]

Gasoline (Fuel) ..................... 248,316 Gasoline, Reformulated .................. 2 4 9 Gauges Coolant T emperature .................. 1 4 4 Fuel ............................... 1 4 4 Odometer ........................... 1 4 7 T achometer .......................... 1 4 4 Gearshift ............................. 2 1 2 General Information ......[...]

Intermittent W ipers (Delay W ipers) ......... 1 0 8 Introduction ............................ 4 Jack Location .......................... 2 6 8 Jack Operation ...................... 268,269 Jacking Instructions ..................... 2 6 9 Jump Starting ......................... 2 7 2 Key , Programming ....................... 1 2 Key , Replacement .[...]

Oil Pressur e ......................... 1 4 5 Rear Fog ............................ 1 5 2 Seat Belt Reminder .................... 1 4 5 Security Alarm (Theft Alarm) ............. 2 5 Theft Alarm (Security Alarm) ............ 1 4 5 T raction Control ...................... 1 1 9 T urn Signal ................. 103,105,149,312 V o l t a g e ...........[...]

Navigation Radio ....................... 1 9 2 Navigation System ...................... 1 9 2 New V ehicle Break-In Period ............... 6 1 Occupant Classification System (OCS) ........ 4 4 Occupant Restraints (Sedan) ................ 2 8 Octane Rating, Gasoline (Fuel) ............. 2 4 8 Odometer ............................ 1 4 7 T r i p .....[...]

Sunroof ............................ 1 2 2 T ransfer Unit ........................ 3 0 3 W indows ............................ 2 7 Power Steering Fluid .................... 3 1 8 Power T ransfer Unit ..................... 3 0 3 Pregnant W omen and Seat Belts ............. 3 9 Preparation for Jacking ................... 2 6 9 Pretensioners Seat Belt[...]

Safety Checks Inside V ehicle ............... 6 2 Safety Checks Outside V ehicle .............. 6 2 Safety Defects, Reporting ................. 3 4 1 Safety Information, T ire .................. 2 2 5 S a f e t yT i p s ............................. 6 1 Satellite Radio ...................... 192,193 Satellite Radio Antenna .................. 1 9 5 [...]

Snow T ires ............................ 2 4 7 Spare T ire ....................... 236,237,268 Spark Plugs ........................... 2 8 6 Specifications O i l ................................ 2 8 5 Speed Control (Cr uise Control) .......... 109,148 Speedometer .......................... 1 4 4 Speedometer and Odometer ............... 1 4 2 S t a [...]

Flat Changing ........................ 2 7 1 General Information ................... 2 3 3 High Speed ......................... 2 3 5 Inflation Pressur es .................... 2 3 4 Jacking ............................. 2 6 8 L i f eo fT i r e s ......................... 2 3 9 Load Capacity .................... 229,230 Pressur e Monitor System (TPM[...]

T ransmitter Programming (Remote Keyless Entry) ................... 2 2 T ransporting Pets ........................ 6 0 T r e a dW e a r I n d i c a t o r s ................... 2 3 8 T rip Odometer ......................... 1 4 7 T rip Odometer Reset Button ............... 1 4 8 T urn Signals ..................... 105,149,312 UConnect™ (Hands-Fre[...]

NOTES[...]