Dodge 2009 Caliber SRT4 Bedienungsanleitung

2009 C ALIBER SR T 4 C ALIBER SR T4 Chrysler LL C 81-226-0938 First Edition Printed in U.S.A. OWNER ’S MANU AL 2009[...]

VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. Y our driving ability can be seriously impaired with blood alcohol levels f[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 7 3 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number ............... 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents. Y ou are urged to r ead these publications carefully . Following the ins[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Caution[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith The Key ............. 1 5 ▫ Key-In-Ignition Reminder ................ 1 5 䡵 Steering Wheel Lock — If Equipped ......... 1 5 ▫ T o Manually Lock The Steering Wheel .[...]

▫ Remote Key Unlock, Driver Door/All First P r e s s .............................. 2 1 ▫ Illuminated Appr oach — If Equipped ....... 2 2 ▫ T o Lock The Doors And Liftgate ........... 2 2 ▫ Sound Horn W ith Remote Key Lock ........ 2 3 ▫ Flash Lights W ith Remote Key Lock/Unlock ......................... 2 4 ▫ Using The Panic Alarm ..[...]

▫ Enhanced Driver And Seat Belt Reminder System (BeltAlert 威 ) .................... 4 6 ▫ Seat Belts And Pr egnant W omen ........... 4 7 ▫ Driver And Fr ont Passenger Supplemental Restraint System (SRS) - Airbag ............ 4 8 ▫ Child Restraint ....................... 6 1 䡵 Engine Break-In Recommendations .......... 6 9 䡵 Safety T [...]

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransmission — If Equipped 1. Place the shift lever in P ARK. 2.[...]

NOTE: If you try to remove the key befor e you place the shift lever in P ARK, the key may become trapped tem- porarily in the ignition switch cylinder . If this occurs, rotate the key to the right slightly , then r emove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safet[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual T ransmission 1. T urn the ignition switch to the ACC (Accessory) position. 2. Push the key and cylinder inward and r otate the key to the LOCK position. 3. Remove the key from the ignition[...]

Locking Doors With The Key Y ou can insert the key with either side up. T o lock the door , turn the key to the right. T o unlock the door , turn the key to the left. Refer to “Body Lubrication” under “Maintenance Procedur es” in Section 7. Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition sounds a signal [...]

SENTR Y KEY 姞 The Sentry Key 威 Immobilizer System prevents unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regar dless of whether the vehicle is locked or unlocked. The system uses ignition keys that have an embedded electronic chip (transponder) to pr event un[...]

• Exxon/Mobil Speedpass™, additional Sentry Keys 威 , or any other transponder-equipped components on the same key chain will not cause a key-related (transponder) fault unless the additional part is physi- cally held against the ignition key being used when starting the vehicle. Cell phones, pagers, or other Radio Frequency (RF) electr onics [...]

Customer Key Programming If you have two valid Sentry Keys 威 , you can program new Sentry Keys 威 to the system by performing the following procedur e: 1. Cut the additional Sentry Key 威 T ransponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch. T urn the ignition switch t[...]

repr ogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be repr ogrammed. General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device mus[...]

3. The V ehicle Security Light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the system is arming. During this period, if a door is opened, the ignition switch is turned ON, or the power door locks are unlocked in any manner , the V ehicle Security Alarm will automatically disarm. After approximately 16 [...]

NOTE: The line of transmission must not be blocked with metal objects. T o Unlock The Doors And Liftgate Press and r elease the UNLOCK button on the REK transmitter once to unlock the driver ’s door , or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated [...]

2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle by pr ess- ing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the LOCK position and the key removed. 4. Repeat these steps if you want to return this featur e to its previous setting. NOTE: Pressing the LOCK button on the RKE tran[...]

Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter . This feature can be turned on or turned off. T o change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to “Sound Horn with Lock,” under “Personal Settings (Customer Programmabl[...]

Flash Lights with Remote Key Lock/Unlock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter . This feature can be turned on or turned off. T o change the current setting, pr oceed as follows: • For vehicles equipped with the EVIC, refer to “Flash Light W ith Lock,” under Pe[...]

The Panic Alarm will stay on for three minutes unless you turn it off by pr essing the P ANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater . NOTE: When you turn off the Panic Alarm by pr essing the P ANIC button a second time, you may have to be closer to the vehicle due to the radio frequency noises of the system. Prog[...]

RKE T ransmitter Battery Replacement NOTE: Perchlorate Material – special handling may ap- ply . See “www .dtsc.ca.gov/hazardouswaste/per chlorate.” The recommended r eplacement battery is CR2032. 1. If the RKE transmitter is equipped with a screw , remove the scr ew . W ith the RKE transmitter buttons facing down, use a flat blade to pry the[...]

NOTE: If the RKE transmitter is equipped with a screw , reinstall and tighten the scr ew until snug. DOOR LOCKS Manual Door Locks Use the manual door lock plunger to lock the doors from inside the vehicle. If the plunger is down when the door is closed, the door will lock. Make sure the keys ar e not inside the vehicle before closing the door . W A[...]

W ARNING! (Continued) • When leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe per- sonal injuries and death. CAUTION! An unlocked vehicle is an invitation to thieves.[...]

3. All doors are closed. 4. The throttle is pr essed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not pr eviously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter . The Automatic Door Lock feature can be enabled or disabled. Refer to “Personal Settings” under “Electronic V ehicle Informat[...]

4. The drivers door is opened. 5. The doors were not pr eviously unlocked. The Auto Unlock feature can be enabled or disabled. Refer to “Personal Settings” under “Electronic V ehicle Information Center (EVIC) — (if equipped)” in Section 4. For vehicles not equipped with the EVIC, the Auto Unlock Feature can be enabled or disabled by perfo[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle. Inserting Ign[...]

POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver ’s door trim panel control all the door windows. Ther e are single window controls on each passenger door trim panel, which oper - ate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position. NOTE: • F[...]

Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Section 4. W ARNING! Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unattended children, can become entrapped by the windows while operating the power WINDOW switches. Such entrapment may result[...]

LIFTGA TE NOTE: The key that is used to start your vehicle is also used to lock or unlock the doors and open the liftgate. T o unlock the liftgate, insert the key into the lock and turn it to the right (manual lock models only). The liftgate can also be unlocked using the Remote Keyless Entry (RKE) transmitter or by activating the power door lock s[...]

• Although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to r elease the latch in the event of an electrical system malfunction. W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be i[...]

W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly . Buckle up even though you are an excellent driver , [...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a se[...]

2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Pulling Out Th[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increasing [...]

4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can increase[...]

6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , ch[...]

As a guide, if you are shorter than average you will prefer a lower position, and if you ar e taller than average you’ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position. Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder belt[...]

3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap. Routing The Rear Center Shoulder [...]

6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt. A snug belt reduces the risk of slidin[...]

9. T o release the belt, push the r ed button on the buckle. 10. T o disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to ret[...]

the pretensioners ar e single use items. After a collision that is severe enough to deploy the airbags and pr eten- sioners, both must be replaced. Enhanced Driver And Seat Belt Reminder System (BeltAlert 姞 ) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph ([...]

4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming. BeltAlert 威 can be reactivated by r epeating this procedur e. NOTE: Although BeltAlert 威 has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver or front passenge[...]

Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove co[...]

The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity . This vehicle may also be equipped with side curtain airbags to protect the driver and passengers sitting next to a window . If the vehicle is equipped with side curtain airbags, they are located[...]

W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing. • If your vehicle is equipped with sid[...]

moderate-to-severe side collisions. In certain types of collisions, both the front and side airbags may be trig- gered. But even in collisions wher e the airbags work, you need the seat belts to keep you in the right position for the airbags to protect you pr operly . Here ar e some simple steps you can take to minimize the risk of harm from a depl[...]

4. If your vehicle has side airbags, do not lean against the door . Airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under ⬙ If Y ou Need Assistance ⬙ in Section 9 of th[...]

• Supplemental Side Curtain Airbags above side win- dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Seatbelt Reminder Light • Knee Impact Bolsters • Driver Inflatable Knee Bolster • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pr etensioners How The Airbag System W[...]

• The ORC also turns on the Airbag W arning Light in the instrument panel for six to eight seconds as a self-check when the ignition is first turned ON. After the self-check, the Airbag W arning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Airbag W arning Light either momentarily or continu- ous[...]

• The Side Impact (SRS) Side Curtain Airbags (If equipped) are designed to activate only in certain side collisions. The ORC module determines if a side collision is severe enough to r equire the side airbags to inflate. The side airbag control module will not detect r ollover , front or r ear collisions. The ORC Module monitors the readiness of [...]

• The Knee Impact Bolsters help protect the knees, and position everyone for the best interaction with the front airbag. W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could resul[...]

However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . As the airbags deflate you may see some smoke-like particles. The particles are a normal by- product of the pr ocess that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passen[...]

moment of airbag deployment, or near-deployment, and up to a quarter second of high-speed deceleration data during and/or after air bag deployment or near- deployment. EDR data are ONL Y r ecorded if an airbag deploys, or nearly deploys, and are otherwise unavail- able. NOTE: 1. A near-deployment event occurs when the airbag sensor detects severe v[...]

particular driver , vehicle, or crash, will be treated confi- dentially . Confidential data will not be disclosed by Chrysler LLC to any third party except when: 1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2. Used i[...]

Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it. Children 12 years and younger should ride pr operly buckle[...]

• Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one-year old and weigh at least 20 lbs. (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and ⬙ convertible ⬙ child seats. Both types of child restraints ar e held in the vehicle by the lap/shoulder belt or[...]

seat are held in the vehicle by the lap/shoulder belt. (Some booster seats are equipped with a fr ont shield and are held in the vehicle by the lap portion.) NOTE: For additional information refer to www .seatcheck.org. W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The c[...]

The passenger seat belts are equipped with either cinching latch plates or seat belt retractors that can be switched to an automatic locking mode, which are designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder port[...]

Automatic-Locking Retractor (ALR) T o operate the switchable retractor , pull the belt from the retractor until ther e is enough to allow it to pass through the child restraint and slide the latch plate into the buckle. Then pull on the belt until it is fully extended from the r etractor . Allow the belt to r eturn into the retractor , pulling on t[...]

Y our vehicle is equipped with the child restraint anchor - age system called LA TCH, which stands for Lower Anchors and T ether for CHildren. The LA TCH system provides for the installation of the child r estraint without using the vehicle seat belt. All three rear seating positions have lower anchorages that are capable of accommodat- ing LA TCH-[...]

Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage have been available for some time. In fact, many child restraint manufactur ers will provide add-on tether strap kits for some of their older products. [...]

Installing the Child Restraint System W e urge you to car efully follow the directions of the manufacturer when installing your child r estraint. Many , but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or connector and a means for adjusting the tension in the strap. Forward-facing toddler r [...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap. Children T oo Large For Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are[...]

While cruising, brief full-thr ottle acceleration within the limits of local traffic laws, contributes to a good br eak-in. W ide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consisten[...]

W ARNING! If you are required to drive with the deck lid/liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays and loose parts. D[...]

Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread. Inspect tr ead and sidewall for cuts or cracks. Check the wheel nuts for tightness. Check the tires (including spar e) for proper pr essure. Lights[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 7 7 ▫ Inside Day/Night Mirror ................ 7 7 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 7 8 ▫ Outside Mirror — Driver’s Side ........... 7 8 ▫ Outside Mirror — Passenger’s Side ......... 7 8 ▫ Po[...]

䡵 V oice Recognition System (VR) — If Equipped ........................... 1 0 9 ▫ V oice Recognition System (VR) Operation . . . 109 ▫ Commands .......................... 1 1 1 ▫ V oice T raining ....................... 1 1 4 䡵 Seats ............................... 1 1 4 ▫ Front Seat Adjustment ................. 1 1 4 ▫ Manual Seat[...]

䡵 W indshield W ipers And W ashers .......... 1 2 7 ▫ W indshield W iper Operation ............ 1 2 7 ▫ Intermittent W iper System .............. 1 2 8 ▫ W indshield W ashers ................... 1 2 8 ▫ Mist Feature ........................ 1 2 9 䡵 T ilt Steering Column ................... 1 3 0 䡵 Electronic Speed Contr ol — If Equi[...]

▫ Pinch Protect Featur e .................. 1 4 2 ▫ Pinch Protect Override ................. 1 4 2 ▫ V enting Sunroof — Expr ess ............. 1 4 3 ▫ Sunshade Operation ................... 1 4 3 ▫ W ind Buffeting ...................... 1 4 3 ▫ Sunroof Maintenance .................. 1 4 3 ▫ Ignition Off Operation ................. 1[...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of vehicle). The mirr or should be adjusted while set i[...]

Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror . Pow[...]

T o adjust a mirror , turn the control wand towar d the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirr or to move. When finished adjusting the mirror , turn the control to the center position to prevent accidentally moving a mirr or . W ARNING! V ehicles and other objects seen in the passenger si[...]

V anity Mirrors — If Equipped T o use the vanity mirror , rotate the sun visor down and swing the mirror cover upwar d. Sun Visor Sliding Feature The sun visors may be extended out to provide mor e coverage of the side glass. HANDS-FREE COMMUNICA TION (UConnect 姞 )— IF EQUIPPED NOTE: The sales code RER and REU radios contain an integrated Han[...]

NOTE: The UConnect 威 system requir es a cellular phone equipped with the Bluetooth 威⬙ Hands-Fr ee Profile, ⬙ Ve r - sion 0.96 or higher . See the UConnect 威 website for supported phones. NOTE: For UConnect 威 customer support, visit the following websites: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/ucon[...]

V oice Recognition Button Actual button location may vary with the ra- dio. The individual buttons are described in the “Operation” section. The UConnect 威 system can be used with any Hands-Free Profile certified Bluetooth 威 cellular phone. See the UConnect 威 website for supported phones. If your cellu- lar phone supports a differ ent pro[...]

• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command when you are asked for it. For example, you can use the combined form voice com- mand ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two v[...]

The following are general phone to UConnect 威 system pairing instructions: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts. • Y ou will be asked to say a four-digit Personal [...]

• The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ . • The UConnect 威 system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and t[...]

• When prompted, enter the number designation (e.g., ⬙ Home, ⬙⬙ W ork, ⬙⬙ Mobile, ⬙ or ⬙ Pager ⬙ ). This will allow you to store multiple numbers for each phonebook entry , if desired. • When prompted, r ecite the phone number for the phonebook entry that you are adding. After you are finished adding an entry into the phone- boo[...]

• Depending on the maximum number of entries down- loaded, there may be a short delay befor e the latest downloaded names can be used. Until then, if avail- able, the previous downloaded phonebook is available for use. • Only the phonebook of the currently connected mobile phone is accessible. • Only the mobile phone’s phonebook is download[...]

book entry via Bluetooth 威 . Please see your phone Owner ’s Manual for specific instructions on how to drop the Bluetooth 威 connection. • If the phonebook entry is longer than 24 characters, it will only use the first 24 characters. Edit UConnect 威 Phonebook Entries NOTE: • Editing names in the phonebook is recommended when the vehicle [...]

• Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Delete. ⬙ • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names[...]

• Automatic downloaded phonebook entries cannot be deleted or edited. List All Names in the UConnect 威 Phonebook • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook List Names. ⬙ • The UConnect 威 system will play the names of all the phonebook entries, including the downloaded [...]

Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cellular phone. Press the PHONE button to place the current call on hold and answer the incoming call. NOTE: The UConnect [...]

Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the PHONE button until you hear a double beep indicating that the two calls have been joined into one conference call. Three-W ay Calling T o initiate three-way calling, pr ess the VOICE RECOG- NITION button while a call is in progr ess, and make a second p[...]

• After the ignition key is switched to OFF , a call can continue on the UConnect 威 system either until the call ends, or until the vehicle battery condition dictates cessation of the call on the UConnect 威 system and transfer of the call to the mobile phone. • After the ignition key is switched to OFF , a call can continue on the UConnect [...]

If the phone is not reachable and the UConnect 威 system is operational, you may reach the emer gency number as follows: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Emergency ⬙ and the UConnect 威 system will instr uct the paired cellular phone to call the emer gency num- ber . This fe[...]

T owing Assistance If you need towing assistance: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: • The towing assistance number dialed is based on the country where the vehicle is pur chased (1-800-528- 2069 for the U.S., 1-877-213-4525 for Canada, 55-14- 3454 [...]

When calling a number with your UConnect 威 system that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can press the VOICE RECOGNITION button and say the sequence you wish to enter , followed by the word ⬙ Send. ⬙ For example, if requir ed to enter your PIN followed with a pound, ( 3 7 4 6 #), you c[...]

T urning Confirmation Prompts ON/OFF T urning confirmation prompts of f will stop the system from confirming your choices (e.g., the UConnect 威 sys- tem will not repeat a phone number befor e you dial it). • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Confirmations. ⬙ The UConnect [...]

Mute/Un-Mute (Mute OFF) When you mute the UConnect 威 system, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the UConnect 威 system: • Press the VOICE RECOGNITION button. • Following the beep, say ⬙ Mute. ⬙ In order to un-mute the UConnect ?[...]

• The UConnect 威 system will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “select” or “delete” a paired phone being announced, press the VOICE RECOGNI- TION button and say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or ?[...]

Things Y ou Should Know About Y our UConnect 姞 System UConnect 威 T utorial T o hear a brief tutorial of the system features, pr ess the PHONE button and say “UConnect 威 T utorial.” V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the UConnect 威 system V oice T raining fea[...]

• Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface,[...]

• In a convertible vehicle, system performance may be compromised with the convertible top down. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation fro[...]

104 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 105 3[...]

106 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 107 3[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

When you press the VR har d-key , you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR har d-key , listen for the beep, and say your command. Pressing t[...]

Commands The V oice Recognition system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the VR har d-key . 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the v[...]

Radio FM T o switch to the FM band say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select the next station) • “Previous Station” (to select the pr evious station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (t[...]

Memo T o switch to the voice recor der mode say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding you may press the VR har d-key to stop recor ding. Y ou proceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (to continue [...]

V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the UConnect 威 system V oice T raining feature may be used. 1. Press the VR har d-key , say “System Setup” and once you are in that menu then say “V oice T raining.” This will train your own voice to the system and will impro[...]

Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched. W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehic[...]

Manual Lumbar The lumbar adjustment handle is located on the outboard side of the driver’s seat. T o increase or decr ease support, rotate the handle up or down. Driver’s Seatback Recline T o recline: 1. Lean forward befor e lifting the handle, then lean back to the desired position and r elease the handle. 2. Lift the handle to return the seat[...]

Heated Seats — If Equipped This feature heats the fr ont driver and passenger seats. The controls for fr ont heated seats are located on the center instrument panel ar ea. The switch indicator lights will show when the High or Low heat is on. Press the switch once to choose High (two lights), press it a second time to choose Low (one light), pres[...]

Adjustable Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Pull up or push down on the head restraints so that the upper edge is as high as practical. T o raise a head restraint, pull up on the head restraint. T o lower the head restraint, depr ess the button and push down on the head [...]

Folding Rear Seat T o provide additional storage ar ea, each rear seatback can be folded forward. Pull the strap forwar d to move the seat forward and flat. Folding Rear Seat Rear Seat Folded Flat UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 119 3[...]

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, appr oximately 35 degrees maximum, and release the strap. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people[...]

TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. 1. Pull the hood release lever located on the left kick panel. 2. Move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop r od, clipped to the left side (right side facing hood) of the engine compartment, to sec[...]

T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 8 in (20 cm) and then drop it. This should secur e both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. W ARNING! If the hood is not fully latched it could fly up when the vehicle is moving and b[...]

Headlights, Parking Lights and Instrument Panel Lights T urn the end of the multifunction lever to the first detent for parking light operation. T urn to the second detent for headlight operation. T o change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down. Headlight Control Dimmer Contr[...]

Lights-On Reminder If the headlights or parking lights are on after the ignition is turned OFF , a chime will sound to alert the driver when the driver’s door is opened. Fog Lights — If Equipped The front fog light switch is on the multifunction lever . T o activate the front fog lights, turn on the parking lights or the Low beam headlights and[...]

proper operation of the fr ont and rear turn signal lights. Y ou can signal a lane change by moving the lever partially up or down without moving beyond the detent. If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it [...]

Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is r eleased. NOTE: If the multifunction lever is held in the flash-to- pass position for more than 15 seconds, the high beams will shut off. I[...]

Daytime Running Lights (DRL) — If Equipped The high beam lights will come on as Daytime Running Lights (DRL), at DRL intensity (lower), whenever the ignition is on, the engine is running, the headlight switch is off, the parking brake is of f and the turn signals are of f. NOTE: On this vehicle, the DRLs will automatically turn off when the turn [...]

Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the knob upward (clockwise) to decrease the delay time and downwar d (counterclockwise) to incr ease the delay time. The delay [...]

Mist Feature Push down on the multifunction lever to activate a single wipe to clear the windshield of road mist or spray fr om a passing vehicle. As long as the multifunction lever is held down, the wipers will continue to operate. CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position befor[...]

TIL T STEERING COLUMN T o tilt the steering column, push down on the lever below the multifunction lever . W ith one hand firmly on the wheel, move the steering column up or down as desired. Push the lever back up to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable s[...]

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Contr ol lever is located on the right side of the steering wheel. T o Activate Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. T [...]

T o Set At A Desired Speed When the vehicle has reached the desir ed speed, press down on the Electronic Speed Contr ol lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground befor e pressing the SET lever . T o Deactivate A soft tap [...]

T apping the SET DECEL button once will result in a 1 mph (1.6 km/h) speed decrease. Each time the button is tapped, speed decreases. NOTE: The Electronic Speed Contr ol system has been designed to shut down if multiple speed control switch functions are operated simultaneously in or der to ensure proper operation. If this occurs, the system can be[...]

On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electr onic Speed Control. GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to thr ee remote contr ols (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLin[...]

W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this trans- ceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes [...]

Place the hand-held transmitter 1–3 in (3-8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view . 3. Simultaneously press and hold both the chosen HomeLink 威 button and the hand-held transmitter button until the HomeLink 威 indicator changes from a slow to a rapidly blinking light, then release [...]

This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 6. Firmly press and release the “Learn” or “T raining” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the [...]

Gate Operator/Canadian Programming Canadian radio-frequency laws r equire transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the sa[...]

Reprogramming A Single HomeLink 姞 Button T o re-pr ogram a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desir ed HomeLink 威 button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. W ithout releasing the button, pr[...]

General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation NOTE: The transmitter has bee[...]

W ARNING! • Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wit[...]

Closing the Sunroof Manual Mode T o close the sunroof, pr ess and hold the switch in the forward position. Again, any r elease of the switch will stop the movement and the sunroof will r emain in a partial close condition until the switch is pushed and held forward again. T o ensure sunr oof is fully closed, press and hold switch until sunr oof has[...]

V enting Sunroof — Express Press and hold the “V” button, and the sunr oof will open to the vent position. This is called “express vent”, and will occur regar dless of the sunroof position. During express vent operation, any movement of the switch will stop the sunroof. Sunshade Operation The sunshade can be opened manually . However , th[...]

ELECTRICAL POWER OUTLETS There is a standar d 12-V olt power outlet in the instru- ment panel for added convenience. This outlet can power cell phones, electronics and other low power devices. NOTE: Due to overload protection, the inverter will shut down if the power rating is exceeded. W ARNING! T o A void Serious Injury or Death: • Do not use a[...]

CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories that draw higher power (i.e., coolers, [...]

There ar e also two cupholders located in the back for the rear passengers. CONSOLE FEA TURES The floor console’s sliding armrest moves forwar d 3 in (7.6 cm) to accommodate shorter drivers. The armrest lid also includes a unique flip pocket for holding or stowing a phone or an MP3 player . The bin inside the console can hold up to 10 CD jewel ca[...]

A 1 15-V olt outlet (if equipped) to power small electronics is on the console. For more information on this outlet refer to “Power Inverter – If Equipped” in Section 3. W ARNING! Do not operate this vehicle with the console compart- ment lid in the open position. Cell phones, music players, and other handheld electronic devices should be sto[...]

Press in on the flashlight to release it. T o operate the flashlight, press the switch once for high, twice for low , and a third time to r eturn to off. Press And Release Three-Press Switch 148 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Cargo Cover — If Equipped The cargo ar ea trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining r ear seat. W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on th[...]

Cargo Tie-Down Loops There ar e two D-rings installed on the D-pillars for securing a net across the liftgate opening. W ARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the ancho[...]

Fold Down Speakers — If Equipped When the liftgate is open, the speakers can swing down off the trim panel to face r earward, for tailgating and other activities. Fold-Down Speakers UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 151 3[...]

REAR WINDOW FEA TURES Rear Window Wiper/W asher A switch on the right side of the steering column controls operation of the rear wiper/washer function. Rotating the center of the switch forward to the on position will activate the wiper . The rear wiper operates in an inter- mittent mode only . Rotating the center of the switch all the way forward [...]

Rear Window Defroster The pushbutton is located on the bottom right side of the blower control knob. Pr ess this button to turn on the rear window defr oster . An amber light illuminates to show that the defroster is on. The defroster will automatically turn of f after approxi- mately 10 minutes. For an additional five minutes of operation, press t[...]

COOLED BEVERAGE STORAGE BIN/GLOVE COMP ARTMENT — IF EQUIPPED The upper storage bin door swings upward to pr esent the contents of the long shallow bin that can store items out of sight. Beneath this bin is the glove compartment. The large glove compartment door swings downwar d and features two levels of storage. The upper bin functions as a Cool[...]

T o operate the beverage cooler , pull the slide control about 0.5 in (12 mm) toward the passenger compartment. This will allow cool air to enter the beverage cooler . T o shut off the beverage cooler when not in use, push the slide control back 0.5 in (12 mm). This will pr event cool air from entering the passenger compartment when in heat mode. V[...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ................ 1 6 1 䡵 T urbo Boost Gauge ..................... 1 6 2 䡵 Instrument Cluster ..................... 1 6 3 䡵 Instrument Cluster Descriptions ............ 1 6 4 䡵 Electronic V ehicle Information Center (EVIC) .............................. 1 7 4 ▫ E[...]

▫ Compass Calibration .................. 1 8 6 䡵 Electronic Digital Clock ................. 1 8 7 ▫ Clock Setting Procedur e ................ 1 8 7 䡵 Sales Code REQ — AM/FM Ster eo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) ................................ 1 8 8 ▫ Operating Instructions - Radio Mode ....... 1 8 8 ▫ Operation[...]

䡵 Sales Code RES/RSC — AM/FM Ster eo Radio W ith CD Player (MP3 AUX Jack) And Sirius Radio ............................... 2 1 6 ▫ Operating Instructions — Radio Mode ...... 2 1 6 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play .................. 2 2 2 ▫ Notes On Playing MP3 Files ............. 2 2 4 ▫ List Button (CD M[...]

䡵 CD/DVD Maintenance .................. 2 3 7 䡵 Radio Operation And Cellular Phones ....... 2 3 8 䡵 Climate Controls ...................... 2 3 8 ▫ Climate Controls ..................... 2 3 8 ▫ Air Filtration System — If Equipped ....... 2 4 3 ▫ Operating T ips ...................... 2 4 4 160 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT P ANEL FEA TURES 1 - Air Outlets 5 - Glove Compartment 9 - Hazard W arning Flasher Switch 2 - Demisters 6 - Beverage Cooler 10 - Passenger Airbag Disable Light 3 - Instrument Cluster 7 - Storage Cubby 1 1 - Boost Gauge 4 - Radio 8 - Climate Controls UNDERST ANDING YOUR INSTRUMENT P ANEL 161 4[...]

TURBO BOOST GAUGE Y our vehicle is equipped with a boost gauge that indi- cates the intake manifold pressur e relative to bar ometric pressur e. The engine management system in your vehicle intelligently regulates intake manifold pr essure based on environmental (ambient) and engine operating condi- tions. T urbo Boost Gauge 162 UNDERST ANDING YOUR[...]

INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 163 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Indicator This indicates that the Fuel Filler Door is located on the left side of the vehicle. 3. T emperature Gauge The temperature gauge shows engine coolant tem- perature. [...]

4. T achometer The white area of the scale shows the permissible engine revolutions-per -minute (RPM x 1000) for each gear range. Before r eaching the red ar ea, ease up on the accelerator to prevent engine damage. 5. Low Fuel Light When the fuel level reaches appr oximately 2.0 gal (7.8 L) this light will turn on, and remain on until fuel is added[...]

9. Seat Belt Reminder Light When the ignition switch is first turned ON, this light will turn on for five to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound. After the bulb check or when driving, if the driver’s seat belt remains unbuckled, the Seat Belt Reminder Light will illumi[...]

If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- hicle. If the temperature r eading does not return to normal, turn the engine off immediately and call for service. Refer to “If Y our Engine Overheats” in Section 6 for mor[...]

1. T urn the ignition switch to the ON position. Do not start the engine. 2. Fully depress the accelerator pedal slowly thr ee times within 10 seconds. 3. T urn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary r epeat this[...]

briefly as a bulb check. If the light does not come on during starting, have the system checked by an autho- rized dealer . 17. Electronic Stability Pr ogram (ESP) Indicator Light / T raction Control System (TCS) Indicator Light If this indicator light flashes during accelera- tion, apply as little throttle as possible. While driving, ease up on th[...]

The light will remain on until the cause is corr ected. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate r epair is neces- sary . W ARNING! Driving a vehicle with the re[...]

If the vehicle electronics sense that the vehicle has traveled about one mile with the turn signals on, a continuous chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a defective outside light bulb. 20. Front Fog Light Indicator — If Equipped This light shows when the front fog lights ar[...]

As an added safety feature, your vehicle has been equipped with a T ire Pr essure Monitoring System (TPMS) that illuminates a low tire pr essure telltale when one or more of your tir es is significantly under-inflated. Accordingly , when the low tire pressur e telltale illumi- nates, you should stop and check your tires as soon as possible, and inf[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]

If the ABS light r emains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as p[...]

The EVIC consists of the following: • System status • V ehicle information warning message displays • Personal settings (customer-pr ogrammable features) • Compass heading • Outside temperature display • T rip computer functions • UConnect 威 hands-free communication system dis- plays (if equipped) • Audio mode display • T ire Pr[...]

• RKE Battery Low (with a single chime) • Personal Settings Not A vailable • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph (1 km/h) • Left/Right Rear Door Ajar (one or mor e, with a single chime if speed is above 1 mph (1 km/h) • Door (s) Ajar (with a single chime if vehicle is in motion) • Gate Aj[...]

• A verage fuel economy • Distance T o Empty (DTE) • Elapsed time • T ire Pr essure Monitor (TPM) • Personal Settings T o Reset The Display Pressing and holding the EVIC button once will clear the function currently being displayed. Reset will only occur if a resettable function is curr ently being displayed. Performance Pages — If Equi[...]

Performance Pages display in the EVIC the following performance data: • 1/8 mile time and speed • 1/4 mile time and speed • 0-60 mph (100 kp/h) time • Braking distance (speed and distance) • V ehicle G-force (longitudinal and lateral) NOTE: If any of the Performance Page screens ar e active, the T rip button will not affect the odometer .[...]

Braking Distance When the braking distance EVIC screen is active, the vehicle braking distance and speed at which the brake was depressed will be displayed. This featur e is available for braking that begins at a speed over 30 mph (48 kp/h). • The mph (kp/h) and ft (m) text will flash when the conditions are met to begin a braking event. While a [...]

G-Force When the G-force scr een is active, all four G-force values will be displayed; two longitude and two latitude. • When a force gr eater than zero is measur ed, the display will update the values as it climbs. As the G-forces fall in value, the peak for ces are held. After zero G is measur ed in the vehicle the peak values will continue to [...]

continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the ⬙ LOW FUEL ⬙ text and a new DTE value will be dis- played, based on the current values in the DTE calcula- tion and the current fuel tank level. Elapsed Time Shows the total elapsed time of travel since the last reset when the ignit[...]

Lock Doors Automatically at 15 mph (24 km/h) When ON is selected, all doors lock automatically when the speed of the vehicle reaches 15 mph (24 km/h). Pr ess and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. Auto Unlock On Exit When ON is selected, all the doors will unlock when the driver’s[...]

Delay T urning Headlights Off When this feature is selected you can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. Press and hold the EVIC button when in this display until 0, 30, 60, or 90 appears to make your selection. Headlights On W ith W ipers (A vailable With Auto Headlights Only) When ON is se[...]

Confirmation of V oice Commands — If Equipped When ON is selected, all voice commands from the UConnect 威 system are confirmed. Pr ess and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. Display English or Metric The EVIC, odometer , and navigation system units can be changed between English[...]

Setting The Compass V ariance And Compass Calibration Compass V ariance Compass V ariance is the differ ence between Magnetic North and Geographic North. T o ensure compass accu- racy , the compass variance should be properly set accor d- ing to the variance map for the zone where the vehicle will be driven. When properly set, the compass will auto[...]

several times until “Compass V ariance” is highlighted. The “Compass V ariance” message and the current vari- ance zone number will be displayed. T o change the zone, press and hold (longer than two seconds) the EVIC button to increment the variance one step. Repeat as necessary , with individual long (for at least one second) EVIC button p[...]

5. A short EVIC button press from the ⬙ Calibrate Com- pass (Y es) ⬙ screen will exit the EVIC Customer - Programmable Featur es, and return it to its normal operating mode. 6. T o complete the compass calibration, drive the vehicle in one or more complete 360–degr ee circle under 5 mph (8 km/h) in an area fr ee from power lines and lar ge me[...]

SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME cont[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button P[...]

Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL contr ol k[...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a thir d time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the treb[...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype [...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD. • VES™ Power - Allows you to turn VES™ ON and OFF (if equipped). • VES™ Lock - Locks out rear VES™ r emote controls (if equipped). • VES™ CH1/CH2 - Allows the user to change the [...]

Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). Y ou can select a language not listed by scrolling down and selecting ⬙ other . ⬙ Enter the country code using the TUNE/SCROLL control knob to scroll up and down to select the number and the[...]

NOTE: The user will have to set these defaults before loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings. AM and FM Buttons Press the buttons to select AM or FM Modes. SET Button — T o Set the Push[...]

Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc. Customers may t[...]

Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. Press and hold the [...]

Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file recording media and formats ar e limited. When writing MP3/WMA files, pay attention to the following restrictions. Supported Media (Disc T ypes) The MP3/WMA file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3,WMA, DVD V ideo, DVD[...]

If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause play- back problems. The radio is designed [...]

Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. Loading times for playback of MP3/WMA files may be affected by the following: • Media - CD-R W media may take longe[...]

Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player , cassette player , or microphone and utilize the vehicle’s audio system to amplif[...]

Operating Instructions — V oice Recognition System (VR) (If Equipped) For the radio, refer to “V oice Recognition System (VR)” in Section 3. For UConnect 威 “V oice Recognition System (VR),” refer to “Hands-Free Communication (UConnect 威 )” in Section 3. Operating Instructions - Hands-Free Phone (UConnect 威 ) (If Equipped) Refer [...]

AM/FM/CD/DVD MUL TIMEDIA SYSTEM RADIO (RER/REN) – IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN and RER Multimedia systems contain a radio, CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for easy men[...]

T o Manually Set the Clock — RER/REN 1. T urn on the multimedia system. 2. T ouch the screen wher e the time is displayed. 3. T ouch the screen wher e “User Clock” is displayed. The clock setting menu will appear on the screen. 4. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- pl[...]

Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the multimedia system is turned off. Pr oceed as follows to change the current setting: 1. T urn on the multimedia system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this featu[...]

SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V olume control knob to t[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button [...]

Setting the T one, Balance, and Fade Push the rotary T une/Scroll control knob and BASS will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the bass tones. Push the rotary T une/Scroll control knob a second time and MID will display . T urn the T une/Scroll control knob to the right or left to increase o[...]

Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in[...]

If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the disc number , the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs o[...]

the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD, MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title. Press[...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

SALES CODE RES/RSC — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V ol[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Recogn[...]

3. After adjusting the hours, press the right side T une/ Scroll contr ol knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side T une/Scroll control knob. Pr ess the T une/Scroll control knob to save time change. 5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pres[...]

2Push the rotary T une/Scroll control knob a second time and MID will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the mid-range tones. Push the rotary T une/Scroll control knob a thir d time and TREBLE will display . T urn the T une/Scroll control knob to the right or left to increase or decr ease the[...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype [...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DIS[...]

CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (on[...]

R W/FF Press the R W button to stop the CD at the beginning of the current CD track/title. Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Button Press the button to select either AM or FM mode. SET[...]

The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a numbe[...]

When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) Bit Rate [...]

T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done b[...]

TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when ignition is OFF). Operating Instructions - Hands-Free Phone (UConnect 威 ) (If Equipped) Refer to “Hands-Free Communication (UConnect 威 )” in Section 3. Operating Instructions - Satellite Radio Mode (If Eq[...]

Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Y our V ehicle Identification Number . T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith REQ/RES Radios W ith the ignition s[...]

Satellite Antenna T o ensure optimum r eception, do not place items on the roof ar ound the rooftop antenna location or strap items to the trunk lid ar ound the trunk lid antenna (if equipped). Metal objects placed within the line of sight of the antenna will cause decreased performance. Lar ger lug- gage items such as bikes should be placed as far[...]

SCAN Button (When Equipped) Pressing the SCAN button causes the tuner to sear ch for the next channel, pausing for eight seconds before con- tinuing to the next. T o stop the search, pr ess the SCAN button a second time. INFO Button — Except REU Radio Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and C[...]

T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will [...]

Y ou may add a second channel to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory . The channels stored in SET 2 memory can be sele[...]

Installing Subwoofer 1. Align the right outside edge of the subwoofer with the outside edge of the rib located on the load floor . 2. Slide the subwoofer toward the fr ont of the vehicle so that the rear edge lines up with the end of the load floor . NOTE: The left outside edge of the subwoofer will not line up with a rib on the load floor . 3. Con[...]

4. Fold the right rear passenger seat r earward into the upright position. The rear tether anchors should engage the hooks located on the back or the subwoofer . 5. Check the subwoofer for being securely fastened to the seatback. W ARNING! Always remove the subwoofer from the vehicle whenever the tether anchors behind the subwoofer are required for[...]

REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a r ocker type switch with a pushbutton in the center . Pressing the top of the switch will increase the volume and pr essing the bottom of th[...]

The button located in the center of the left-hand control will tune to the next preset station that you have pr o- grammed in the radio preset pushbuttons. CD Player Press the top of the switch once to go to the next track on the CD. Press the bottom of the switch once to go to the beginning of the current track or to the beginning of the previous [...]

NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e. scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have theft protection encoding. T ry a known good disc before considering disc player service. RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellul[...]

The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The controls ar e as follows: Mode Control (Air Direction) The mode control allows you to choose from several patterns of air distribution. Y ou can select either a primary mode, as identified by the symbols, or [...]

air goes to the floor outlets. This feature gives impr oved comfort during sunny but cool conditions. Floor Air is directed thr ough the floor outlets and side window demister outlets with a small amount through the defr ost outlet. Mix Air is directed thr ough the floor , defrost and side window demister outlets. This setting works best in cold or[...]

Fan Control Use this control to r egulate the amount of air forced thr ough the system in any mode you select. The fan speed increases as you move the control fr om the left (OFF) to the right position. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if the blower control is left i[...]

Circulation Control Use this button to choose between outside air intake or Recirculation of the air inside the vehicle. A lamp will illuminate when you are in r ecirculate mode. Only use the recir culate mode to tempo- rarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start-up in very hot or humid wea[...]

Air Conditioning (MAX A/C) For maximum cooling select the air direction to either the Panel or Bi-Level position using the mode control. Pr ess the A/C button and the Recirculation button so that both lamps are illuminated and set the temperature contr ol to its coolest setting. NOTE: • Recirculation Mode will not operate in floor , mix or defros[...]

Operating Tips 244 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

W indow Fogging V ehicle side windows tend to fog on the inside in mild rainy or humid weather . T o clear the windows, set mode to the mix or defrost position. Dir ect the panel outlets toward the side windows. Do not use r ecirculate without A/C for long periods as fogging may occur . Interior fogging on the windshield can be quickly re- moved by[...]

Side W indow Demisters A side window demister outlet is at each end of the instrument panel. These nonadjustable outlets dir ect air toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows thr ough which you view the outside mirrors. 246 UNDERST ANDING YOUR INSTRUMENT P AN[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 5 0 ▫ Normal Starting ..................... 2 5 0 ▫ Extremely Cold W eather (Below -20°F Or -29°C) ............................. 2 5 1 ▫ If Engine Fails T o Start ................. 2 5 1 ▫ After Starting ....................... 2 5 2 ▫ T urbocharger “Coo[...]

䡵 Brake System ......................... 2 6 0 ▫ Anti-Lock Brake System (ABS) — If Equipped .......................... 2 6 1 䡵 Electronic Brake Contr ol System ........... 2 6 4 ▫ T raction Control System (TCS) ........... 2 6 4 ▫ Brake Assist System (BAS) .............. 2 6 4 ▫ Electronic Stability Pr ogram (ESP) ......... 2 6 5 䡵 [...]

䡵 Fuel Requirements ..................... 2 9 6 ▫ 2.4L T urbo Engine .................... 2 9 6 ▫ Reformulated Gasoline ................. 2 9 7 ▫ Gasoline/Oxygenate Blends ............. 2 9 7 ▫ E-85 Usage In Non-Flex Fuel V ehicles ...... 2 9 8 ▫ MMT In Gasoline .................... 2 9 8 ▫ Materials Added T o Fuel ............... 2 9[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Do not leave the key in [...]

W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used to [...]

CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. T urbocharger “Cool Down” This vehicle is equipped with an after-r un pump to cool the turbocharger after the engin[...]

Use each gear in numerical order , do not skip a gear . Be sure the transaxle is in 1st gear , (not 3rd gear), when starting from a standing position. Damage to the clutch can result fr om starting in 3rd gear . For most city driving you will find it easier to use only the lower gears. For steady highway driving with light accelerations, 6th gear i[...]

CAUTION! If you skip more than one gear while downshifting or downshift at too high of a vehicle speed, you could damage the engine, transmission, or clutch. T o maintain a safe speed and prolong brake life, shift down to 2nd or 1st when descending a steep grade. When turning a corner , or driving up a steep grade, downshift early so that the engin[...]

2. Slow down if the road has standing water or puddles. 3. Replace the tires when tr ead wear indicators first become visible. 4. Keep the tires pr operly inflated. 5. Maintain enough distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. DRIVING THROUGH W A TER Driving through water mor e than a few in[...]

CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing wa- ter [...]

W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances. Therefore, after driving through standing water , drive slowly and[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to t[...]

P ARKING BRAKE When the parking brake is applied with the ignition ON, the brake light in the instrument cluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle is moving, a chime will sound to alert the driver . The chime wil[...]

Y ou should always apply the parking brake before leav- ing the vehicle. W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition. A child could operate power win- dows, other co[...]

If either of the two hydraulic systems lose normal capa- bility , the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and gr eater pedal force r equired to slow or stop. In addition, if the malfunction is caused by an internal leak, as the brake [...]

W ARNING! (Continued) • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely , or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner w[...]

ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops. Y ou may also experience the following when the brake system goes into Anti-Lock mode: • the ABS motor running (it may continue to run for a short time after the[...]

ELECTRONIC BRAKE CONTROL SYSTEM If your vehicle is equipped with the advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), T raction Control System (TCS) Brake Assist System (BAS), and Electronic Stability Pr ogram (ESP). All four systems work together to enhance vehicle stability and control in various driving cond[...]

W ARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too [...]

ESP/TCS Indicator Light The “ESP/TCS Indicator Light” located in the instrument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active. The “ESP/TCS Indicator Light” also flashes when TCS is active. If the “ESP/TCS Indicator Light” begins to flash during acceleration, ease up on the accelerator an[...]

This mode should be used for most driving situations. ESP should only be turned to “Partial ESP” for specific reasons as noted below . Partial ESP This mode is entered by momentarily depr essing the “ESP OFF” switch. When in “Partial ESP” mode, the TCS portion of ESP has been disabled, the thresholds for ESP activation are raised, and t[...]

Full Of f This mode is intended for off-highway or of f-road use only and should not be used on any public roadways. In this mode, all TCS and ESP stability featur es are turned OFF . T o enter the “Full Off” mode, depr ess and hold the ESP OFF switch for five seconds while the vehicle is stopped with the engine running. After five seconds, a c[...]

W ARNING! W ith the ESP switched OFF , the enhanced vehicle stability offered by ESP is unavailable. In an emer - gency evasive maneuver , the ESP system will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for of f-highway or off- road only . ESP/BAS W arning Light and ESP/TCS Indicator Light The malfunction[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standard h[...]

• L T (Light T ruck) - Metric tire sizing is based on U.S. design standards. The size designation for L T -Metric tires is the same as for P-Metric tir es except for the letters “L T” that are molded into the sidewall preced- ing the size designation. Example: L T235/85R16. • T emporary spare tir es are high-pr essure compact spares designe[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.S. design standards T = T emporary spare tir e 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = As[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size de[...]

NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GA WRs) for the front and r ear axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section. T o determine the maximum loading conditions of your vehicle, locate the statement “The comb[...]

6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: • The following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicle[...]

278 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tir e inflation pressure is defined as the tire pr essure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour period. The cold tir e inflation pressur e must not exceed the maximum in[...]

W ARNING! High-speed driving, with your vehicle at or above maximum load, is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires W ARNING! Combining radial ply tires with other type[...]

W ARNING! (Continued) • Do not spin your vehicle’s wheels faster than 30 mph (48 km/h), or for more than 30 seconds continuously , when you are stuck; and do not let anyone near a spinning wheel, no matter what the speed. T read Wear Indicators T read wear indicators ar e in the original-equipment tires to help you in determining when your tire[...]

Many states have laws requiring tir e replacement at this point. Life of Tire The service life of a tire is dependent upon varying factors, including, but not limited to: • Driving style • T ire pr essure • Distance driven W ARNING! The tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to [...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

SNOW TIRES Some areas of the country r equire the use of snow tir es during W inter . Standard tir es are of the all-season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tir es equivalent in size and type to the original equipment tires. Use snow tir es only in sets of fo[...]

Follow the recommended tir e rotation fr equency for your type of driving found in the “Maintenance Schedules” section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed. TIRE PRESSURE MONITORING SYSTEM (TPMS) • The T ire Pr e[...]

• The TPMS will warn the driver of a low tire pr essure if the tire pr essure falls below the low-pr essure warn- ing limit for any reason, including low temperatur e effects, or natural pr essure loss thr ough the tire. • The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off unti[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warnings have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause[...]

• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System This is the TPMS warning indicator located in the instrument cluster . The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tir e pressur e lev- els. Sensors, mounted to each wh[...]

Check TPMS W arnings The T ire Pr essure Monitoring T elltale Light will flash on and off for 75 seconds and r emain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat pr oviding the system fault still exists. The T ire Pressur e Monitoring T elltale Light wil[...]

4. For each subsequent ignition key cycle, a chime will sound and the T ire Pr essure Monitoring T elltale Light will flash on and off for 75 seconds and then r emain on solid. 5. Once you repair or r eplace the original road tir e and reinstall it on the vehicle in place of the compact spar e tire, the TPMS will update automatically and the T ire [...]

• V arious T ire Pr essure Monitoring System Messages, which display in the Electronic V ehicle Information Center (EVIC) • Y ellow T ire Pr essure Monitoring T elltale Light T ire Pressure Monitoring Low Pressure W arnings The T ire Pr essure Monitoring T elltale Light will illumi- nate in the instrument cluster and an audible chime will be ac[...]

graphic display of the pressur e value(s) will stop flash- ing, and the T ire Pr essure Monitoring Light will extin- guish once the updated tire pr essure(s) have been r e- ceived. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check TPMS Message The T ire Pr essure Monitoring T elltale Li[...]

will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Snow or ice around the wheels or wheel[...]

limit in any of the four active road tir es. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may no[...]

Over 40 automobile manufacturers ar ound the world have issued and endorsed consistent gasoline specifica- tions (the W orld W ide Fuel Charter , WWFC) that define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer r ecommends the use of gasolines that meet the WWFC specifi[...]

Problems that r esult from using methanol/gasoline or E85 Ethanol blends are not the r esponsibility of the manufacturer . While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol. E-85 Usage In Non-Flex Fuel V ehicles Non-FFV vehicles are compatible with gasoline contain- ing 10% ethanol (E10). Gasoline with[...]

content of gasoline may not be indicated on the pump, you should ask your gasoline retailer if the gasoline contains MMT . It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than allowed in the United States. MMT is pro- hibited in Federal and California reformulated gasolines. Materials [...]

• The use of fuel additives, which are now being sold as octane enhancers, are not r ecommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting fr om the use of such fuels or additives are not the responsibility of the manufactur er . NOTE: Intentional tampering with em[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door , on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away[...]

NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and Federal fire regula- tions and will cause the Malfunction Indicat[...]

CAUTION! Damage to the fuel system or emission control sys- tem could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. TRAILER TOWING T railer towing with this vehicle is not recommended. RECREA TIONAL TOWING (BEHIND MOT ORHOME, ETC.) T owing This V ehicle Behind Another V[...]

NOTE: ONL Y vehicles equipped with MANUAL TRANSAXLES may be recr eationally towed at any legal highway speed, for any distance, if the MANUAL TRANSAXLE is in NEUTRAL and the ignition key is in the ACC position. CAUTION! Rear wheel lifts should not be used. Internal damage to the transmission will occur if a rear wheel lift is used when recreational[...]

WHA T TO DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 3 0 6 䡵 If Y our Engine Overheats ................ 3 0 6 䡵 TIREFIT Kit .......................... 3 0 8 ▫ TIREFIT Storage ..................... 3 0 8 ▫ TIREFIT Usage Precautions .............. 3 0 8 ▫ TIREFIT Kit Components & Operation ...... 3 1 1 ▫ S[...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch and both cluster indicators and all fr ont and rear dir ectional signals will flash. Press the switch a second time to turn the flashers off. Do not use this emergency warning system when the vehicle is in motion. Use it [...]

If the pointer rises to the red mark (260 °F / 126.6 °C), the instrument cluster will sound a chime. Pull over and stop the vehicle with the engine at idle, when safe. T urn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the red mark (260 °F / 126.6 °C) for more than a minute, tur[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. T[...]

• When the TIREFIT Sealant is in a liquid form, clean water , and a damp cloth will remove the material from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and pr operly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris befor e connecting the TIREFIT kit.[...]

W ARNING! (Continued) • Keep TIREFIT away from open flame or heat source. • TIREFIT is not a permanent flat tire repair . Have the tire inspected and repaired or replaced after using TIREFIT . Do not exceed 55 mph (90 km/h) until having the tire repaired or replaced. • A loose TIREFIT kit thrown forward in a collision or hard stop could endan[...]

TIREFIT Kit Components & Operation 1. Sealant Bottle 2. Pressur e Gauge 3. Air Pump Power Button 4. Mode Select Knob 5. Power Plug & Cable 6. Air Pump Hose (Black) 7. Sealant Hose (Clear with Y ellow Cap) 8. Accessory Storage Compartment Using the Mode Select Knob & Hoses Selecting Air Mode T urn the Mode Select knob (4) to this positio[...]

Using the Air Pump Power Button Push and release the button (3) once to turn ON the TIREFIT kit. Push and release the button (3) again to turn OFF the TIREFIT kit. Sealing a Tire with TIREFIT (A) Whenever Y ou Stop to Use TIREFIT : 1. T urn ON the vehicle’s hazard warning flashers. 2. V erify that the valve stem (on the wheel with the deflated ti[...]

5. Remove the cap from the valve stem and then scr ew the fitting at the end of the Sealant Hose (7) onto the valve stem. 6. Uncoil the Power Plug and Cable (5) and then insert the plug into the vehicle’s power outlet. NOTE: Do not remove for eign objects (e.g., screws or nails) from the tir e. (C) Injecting TIREFIT Sealant into the deflated tire[...]

(D) After Injecting TIREFIT Sealant: 1. Allow the air pump to inflate the tire to the pr essure indicated on the tire pr essure label on the driver -side latch pillar . Check the pressure in the tir e by looking at the Pressur e Gauge (2). • If the tire inflates to at least 26 psi (1.8 bar) within 15 minutes, proceed to Step 2 of this pr ocedure.[...]

W ARNING! TIREFIT is not a permanent flat tire repair . Have the tire inspected and repaired or replaced after using TIREFIT . Do not exceed 55 mph (90 km/h) until having the tire repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you. (F) After Securing T[...]

7. Have the tire inspected and r epaired or r eplaced at the earliest opportunity at an authorized dealer or tire ser - vice center . 8. Replace the Sealant Bottle (1) at your nearest autho- rized Mopar 威 parts dealership as soon as possible. Refer to “(H) Sealant Bottle Replacement.” (G) Distributing TIREFIT Sealant to Better Enable T ire In[...]

(H) Sealant Bottle Replacement 1. Uncoil the Clear Sealant Hose (7). 2. Locate the rectangular SEALANT BOTTLE RELEASE button in the recessed ar ea where you place your fingers to unlatch the hoses (6) (7) from their storage ar ea. 3. Use the Y ellow Cap on end of the Clear Sealant Hose (7) to depress the SEALANT BOTTLE RELEASE button. The Sealant B[...]

W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transaxle cannot be started this way and may be damaged. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery [...]

W ARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over the battery when attaching the clamps or allow the clamps to touch each other . If acid splashes in your eyes or on your skin, flush the contaminated area immediately with large quantities of water . • A batt[...]

front wheels. Then shift back and forth between RE- VERSE and 1st gear . Usually the least accelerator pedal pressur e to maintain the rocking motion without spin- ning the wheels is most effective. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause axle, tire damage or failure. A tire could explo[...]

CAUTION! DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. Manual T ransaxle • Front Wheel Drive (FWD) or All Wheel Drive (A WD) vehicles can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL. • FWD vehicles can be towed with the front or r ear wheels elevated[...]

Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the r ear wheels are raised. Proper towing equipment is necessary to pr event dam- age to the vehicle. Battery power is requir ed to release the brake/ transmission interlock system. [...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L T urbo ......... 3 2 5 䡵 Onboard Diagnostic System — OBD II ....... 3 2 6 ▫ Loose Fuel Filler Cap Message ........... 3 2 6 䡵 Emissions Inspection And Maintenance Programs ............................ 3 2 7 䡵 Replacement Parts ..................... 3 2 8 䡵 Dealer Service[...]

▫ Manual T ransaxle .................... 3 4 6 ▫ Appearance Care And Protection From Corrosion .......................... 3 4 7 䡵 Fuses .............................. 3 5 2 ▫ Integrated Power Module ............... 3 5 2 䡵 V ehicle Storage ....................... 3 5 5 䡵 Replacement Bulbs ..................... 3 5 5 䡵 Bulb Replacement[...]

ENGINE COMP ARTMENT — 2.4L TURBO 1 — W asher Fluid Reservoir 6 — Battery 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressur e Cap 4 — Brake Fluid Reservoir 9 — Engine Oil Dipstick 5 — Power Distribution Center 10 — Engine Coolant Reservoir MAINT AINING YOUR VEHICLE 325 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems ar e oper- ating properly , your vehicle will provide excellent per- formance and fuel economy , as we[...]

the gas cap is properly tightened. Pr ess the trip odometer “Reset” button to turn off the message. If the pr oblem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a r ow , the system will turn on the “Malfunction Indicator Light (MIL).” Resolv- i[...]

5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and [...]

DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering wi[...]

The best time to check the engine oil level is about five minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect r eading. Checking the oil while the vehicle is on level ground and only when the engine[...]

Engine Oil V iscosity (SAE Grade) SAE 0W -40 engine oil is preferr ed for use in 2.4L T urbo Engine within the operating temperatures shown in the engine oil viscosity chart. SAE 5W -40 Engine Oil is also allowed for use in 2.4L T urbo Engine. The proper SAE viscosity grade of engine oil should be selected based on the following recommendation and [...]

Materials Added T o Engine Oils The manufacture str ongly recommends against the addi- tion of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered pr oduct and it’s performance may be impaired by supplemental additives. Disposing of Used Engine Oil Care should be taken in disposing of used engine oil fr o[...]

W ARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed. Failure to do so can result in serious personal injury [...]

W ARNING! (Continued) Battery gas is flammable and explosive. Keep flame or sparks away from the battery . Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other . Battery posts, terminals and related accessories con- tain lead and lead compounds. W ash hands afte[...]

Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerants and co[...]

NOTE: Use only manufacturer appr oved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compr es- sor Oil, or Refrigerants. Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubri- cated periodically with a[...]

avoid damaging the blade. Keep the blade rubber out of contact with petroleum pr oducts such as engine oil, gasoline, etc. Adding W asher Fluid The fluid reservoir for the windshield washers and the rear window washer is shar ed. The fluid reservoir is located in the engine compartment, be sure to check the fluid level at regular intervals. Fill th[...]

If you notice a change in the sound of the exhaust system, or if exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged; have a competent technician inspect the complete ex- haust system and adjacent body areas for br oken, dam- aged, deteriorated, or mispositioned parts. Open seams or loose connec[...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine opera[...]

W ARNING! (Continued) • Y ou or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator . If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Coolant Checks Check engine coolant[...]

CAUTION! • Mixing of engine coolant (antifreeze) other than specified Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze), may result in engine damage and may decrease corrosion pro- tection. If a non-HOA T engine coolant (antifreeze) is introduced into the cooling system in an emer- gency , it should be replaced with the spec[...]

When adding engine coolant (antifreeze): • The manufacturer r ecommends using MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) • Mix a minimum solution of 50% HOA T engine coolant (antifreeze) and distilled water . Use higher concentra- tions (not to exceed 70%) if temperatures below -34°F [...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove [...]

When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment. This is normally a result of mo[...]

• Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory cooling performance, poor gas mileage, and increased emissions. Brake System Fluid Level Check — Brake Master Cylinder The fluid level in the master cylinder sh[...]

W ARNING! Use of a brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard prolonged braking. Y ou could have an accident. CAUTION! Use of improper brake fluids will affect overall clutch system performance. Improper brake fluids may damage the clutch system resulti[...]

Frequency Of Fluid Change Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary unless the following conditions exist: • The lubricant has become contaminated with water . If contaminated with water , the fluid should be changed immedia[...]

W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover to remove. • Use MOP AR 威 Cle[...]

• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such mater[...]

Stubborn soils can be removed easily with a soft cloth and MOP AR 威 T otal Clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia-based cleaners to clean your leather upholstery . Application of a leather conditioner is not requir [...]

Instrument Panel Cover The instrument panel cover has a low glar e surface which minimizes reflections in the windshield. Do not use protectants or other pr oducts which may cause undesir- able reflections. Use soap and warm water to r estore the low glare surface. Instrument Panel Bezels CAUTION! When installing hanging air fresheners in your ve- [...]

Replace the seat belts if they appear frayed or worn or if the buckles do not work properly . Dry with a soft cloth. FUSES Integrated Power Module The Integrated Power Module (IPM) is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini-fuses. A label that identifies each component may be p[...]

Cavity Cartridge Fuse Mini- Fuse Description 10 20 Amp Y ellow CCN Power Locks 1 1 15 Amp Lt Blue Power Outlet 12 20 Amp Y ellow Ign Run/Acc Inverter 13 20 Amp Y ellow Pwr run/Acc Outlet RR 14 10 Amp Red IOD CCN/Interior Lighting 15 40 Amp Green RAD Fan Relay Bat- tery Feed 16 15 Amp Lt. Blue IGN Run/Acc Cigar Ltr/Sunroof 17 10 Amp Red IOD Feed Mod[...]

Cavity Cartridge Fuse Mini- Fuse Description 26 15 Amp Lt. Blue ENG ASD Relay Feed 2 27 10 Amp Red IGN RUN Only ORC Feed 28 10 Amp Red IGN RUN ORC/OCM Feed 29 Hot Car (No Fuse Re- quired) 30 20 Amp Y ellow Heated Seats 31 10 Amp Red Headlight W asher Relay Control 32 30 Amp Pink ENG ASD Control Feed 1 33 10 Amp Red ABS MOD/J1962 Conn/PCM Cavity Car[...]

CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the[...]

LIGHT BULBS — Interior Bulb Number Front Header Light ...................... T578 Center Dome Light ...................... T578 Rear Cargo/Flashlight ................. 8–A35LF LIGHTS BULBS — Exterior Bulb Number Low Beam/High Beam Headlight ............ H 1 3 Front Park/T urn Signal/Side Marker Light ....................... 3157AK or 3157A Fr[...]

3. Pull bulb off connector . T ail Lights, Rear T urn Signals and Backup Lights 1. Remove the two push-pins from the tail light housing. 2. Grasp the tail light and pull firmly to disengage the light from the apertur e panel. 3. T wist and remove socket fr om light. 4. Remove the bulb from the socket and r eplace. License Lights 1. Use a screw driv[...]

2. Rotate the socket 1/4 turn counterclockwise. 3. Pull the bulb from the socket. Center High-Mounted Stoplight The light is an LED assembly . See your authorized dealer for replacement. 358 MAINT AINING YOUR VEHICLE[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.4L T urbo Engine (SAE 0W -40, API Certified) 5 Quarts 4.7 Liters Cooling System * MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Miles Formula), or equivalent. 7.5 Quarts 7.1 Liters * Includes heater and coolant recovery bottle filled to MAX level[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. Engine Oil For best performance and maximum protection under all types of operating conditions, the manufacturer only r ecommen[...]

Chassis Component Fluid, Lubricant, or Genuine Part Manual T ransaxle Fluid MOP AR 威 A TF+4 MS9602 Brake Master Cylinder MOP AR 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake flu- ids or equivalent. Power Steering Reservoir MOP AR 威 Power Steering Fluid[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 3 6 4 䡵 Maintenance Schedule .................. 3 6 4 ▫ Required Maintenance Intervals .......... 3 6 6 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • U[...]

Once a Month • Check the tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. A[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 36,000[...]

48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the a[...]

60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. ❏ Replace the air conditioning filt[...]

72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. ❏ Replace the air conditioning fi[...]

132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

† This maintenance is recommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 8 3 ▫ Prepar e For The Appointment ............ 3 8 3 ▫ Prepar e A List ....................... 3 8 3 ▫ Be Reasonable W ith Requests ............ 3 8 3 䡵 If Y ou Need Assistance .................. 3 8 3 ▫ Chr[...]

䡵 Publication Order Forms ................. 3 8 7 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 3 8 9 ▫ T readwear .......................... 3 8 9 ▫ T raction Grades ...................... 3 8 9 ▫ T emperature Grades ................... 3 9 0 382 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impair ed customer , who has access to a TDD or a conventional teletypewriter (TTY) in th[...]

the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or r elated concerns. W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addi- tion, [...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Aut[...]

vehicles. A complete working knowledge of the ve- hicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and tech[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to F[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe ti[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) .............. 2 6 1 Adding Engine Coolant (Antifreeze) .......... 3 4 1 Adding Fuel ........................... 3 0 1 Additives, Fuel ......................... 2 9 9 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 332 Air Conditioner Maintenance ............... 3 3 5 Air Conditioning Controls ................. 2[...]

Brake Control System, Electr onic ............. 2 6 4 Brake Fluid ............................ 3 6 1 Brake, Parking .......................... 2 5 9 Brake System ........................ 260,345 Anti-Lock (ABS) ....................... 2 6 1 Fluid Check .......................... 3 4 5 Master Cylinder ....................... 3 4 5 Parking ..........[...]

Child Restraint with Automatic Belts ........... 6 4 Child Safety Locks ........................ 3 0 Child Seat .............................. 6 8 Clean Air Gasoline ....................... 2 9 7 Cleaning Wheels ............................. 3 4 9 Climate Control ......................... 2 3 8 Clock ..................... 187,190,204,208,217 Coin H[...]

Dipsticks Power Steering ........................ 2 5 8 Disposal Antifreeze (Engine Coolant) ............... 3 4 3 Engine Oil ........................... 3 3 2 Door Locks ............................. 2 7 Door Locks, Automatic .................... 2 8 Door Opener , Garage ..................... 1 3 4 Downshifting .......................... 2 5 3 Dri[...]

Oil Filter ............................ 3 6 0 Oil Selection .......................... 3 3 0 Overheating .......................... 3 0 6 T emperature Gauge ..................... 1 6 4 Enhanced Accident Response Featur e .......... 5 7 Ethanol ............................... 2 9 7 Event Data Recorder ...................... 5 8 Exhaust Gas Caution .[...]

Filler Door (Gas Cap) ................... 1 6 4 Gasoline ............................ 2 9 6 Gauge .............................. 1 6 4 Light ............................... 1 6 5 Materials Added ....................... 2 9 9 Methanol ............................ 2 9 7 Octane Rating ........................ 2 9 6 Requirements .......................[...]

High Beam/Low Beam Select Switch ........ 1 2 5 Passing ............................. 1 2 6 Replacing ............................ 3 5 6 Switch .............................. 1 2 3 Heated Seats ........................... 1 1 7 HomeLink 威 (Garage Door Opener) T ransmitter . . . 134 Hood Release .......................... 1 2 1 Ignition ..........[...]

Lead Free Gasoline ...................... 2 9 6 Life of T ires ............................ 2 8 4 Liftgate (Sedan) .......................... 3 4 Liftgate W indow W iper/W asher ............. 1 5 2 Light Bulbs ............................ 3 5 5 Lights .............................. 72,122 Airbag .......................... 58,71,165 Anti-Lock ......[...]

Loading V ehicle T i r e s ............................... 2 7 5 Locks Child Protection ........................ 3 0 Door ................................ 2 7 Power Door ........................... 2 8 Steering Wheel ......................... 1 5 Lubrication, Body ....................... 3 3 6 Lumbar Support ........................ 1 1 6 Maintenan[...]

Octane Rating, Gasoline (Fuel) .............. 2 9 6 Odometer ............................. 1 6 7 T r i p ............................. 167,168 Oil Change Indicator .................. 167,184 Oil, Engine ......................... 329,359 Capacity ............................ 3 5 9 Change Interval ....................... 3 3 0 Checking ..............[...]

Pretensioners Seat Belts ............................. 4 5 Programmable Electr onic Features ............ 1 8 1 Programming T ransmitters (Remote Keyless Entry) .................... 2 5 Radial Ply T ires ......................... 2 8 2 Radio Operation ........................ 2 3 8 Radio, Satellite .......................... 2 2 8 Rear Fog Lights .[...]

Safety Defects, Reporting .................. 3 8 6 Safety Information, T ire ................... 2 7 0 Safety T ips ............................. 7 0 Satellite Radio .......................... 2 2 8 Satellite Radio Antenna ................... 2 3 0 Schedule, Maintenance .................... 3 6 4 Seat Belt Maintenance .................... 3 5 1 Sea[...]

Side W indow Demisters (Defrosters) .......... 2 4 6 Signals, T urn ........................ 170,357 Slippery Surfaces, Driving On ............... 2 5 4 Snow Chains (T ire Chains) ................. 2 8 5 Snow T ires ............................ 2 8 6 Sound System Kicker .............................. 2 3 3 Speed Control (Cr uise Control) ..........[...]

T i r e s ............................ 72,279,389 Aging (Life of T ires) .................... 2 8 4 Air Pressur e .......................... 2 7 9 Chains .............................. 2 8 5 General Information .................... 2 7 9 High Speed .......................... 2 8 1 Inflation Pressur es ..................... 2 8 0 Life of T ires ....[...]

T rip Odometer Reset Button ................ 1 6 8 T urbo Cool Down ....................... 2 5 2 T urn Signals ...................... 124,170,357 UConnect 威 (Hands-Free Phone) .............. 8 1 Understanding Y our Instrument Panel ......... 1 6 1 Uniform T ire Quality Grades ................ 3 8 9 Universal T ransmitter ..................... 1 [...]

INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/AL TERATIONS THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE A WORDABOUT YOUR KEYS Ignition Key RemovalLocking Doors With The KeyKey-In-Ignition ReminderSTEERING WHEEL LOCK - IF EQUIPPED T o Manually Lock The Steering WheelT o Rele[...]

INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power[...]

2009 C ALIBER SR T 4 C ALIBER SR T4 Chrysler LL C 81-226-0938 First Edition Printed in U.S.A. OWNER ’S MANU AL 2009[...]