Draytek Vigor 2710n Bedienungsanleitung

Vigor2710 Series User’s Guide i[...]

Vigor2710 Series User’s Guide ii Vigor2710 Series ADSL2/2+ Firewall Router User Guide Version: 1.0(UK) Date: 20/04/2009[...]

Vigor2710 Series User’s Guide iii Copyright Information Copyright Declarations Copyright 2009 All rights reserved. This pub lication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stor ed in a retrieval system, or translated into any language withou t written permission from the copyright[...]

Vigor2710 Series User’s Guide iv European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, H sinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2710 Ser ies Router DrayTek Corp. declares that Vigor2710 Series of ro uters are in compliance with the following essential requirements and other r[...]

Vigor2710 Series User’s Guide v T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s 1 Pref ace ............................................................................................................... 1 1.1 Web Conf iguration Bu ttons Explanation ................................................................................. 1 1.2[...]

Vigor2710 Series User’s Guide vi 3.6 Wirele ss LAN ............................................................................................................... ......... 60 3.6.1 Basic Concepts ........................................................................................................... .... 60 3.6.2 Genera l Setup ..............[...]

Vigor2710 Series User’s Guide vii 4.6.1 IM/P2P F ilter Profile .................................................................................................... .. 123 4.6.2 URL Content Filter Profile ............................................................................................. 12 4 4.6.3 Web Content Filter Pr ofile............[...]

Vigor2710 Series User’s Guide viii 4.14.8 Ping Diagnosi s .......................................................................................................... .. 204 4.14.9 Trac e Route ............................................................................................................. ... 205 5 Application a nd Exampl es .........[...]

Vigor2710 Series User’s Guide 1 1 P P r r e e f f a a c c e e The DrayTek Vigor 2710 Series ADSL/ADSL2/ADSL2+ routers are designed to be the ideal ADSL-sharing and firewall devices for to the SoHo (Small Office / Home) user. They combine compatibility with all UK ADSL line ty pes together with performance and features into an attractive, reliable[...]

Vigor2710 Series User’s Guide 2 1 1 . . 2 2 L L E E D D I I n n d d i i c c a a t t o o r r s s a a n n d d C C o o n n n n e e c c t t o o r r s s Before you use the Vigor router, please ge t acquainted with the LED indicators and connectors first. 1 1 . . 2 2 . . 1 1 F F o o r r V V i i g g o o r r 2 2 7 7 1 1 0 0 LED Status Explanation Blinkin[...]

Vigor2710 Series User’s Guide 3 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When y ou see the ACT LED be gins to blink rapidly than usual, release the button. Th en th e router will restart with the factory default configuration[...]

Vigor2710 Series User’s Guide 4 1 1 . . 2 2 . . 2 2 F F o o r r V V i i g g o o r r 2 2 7 7 1 1 0 0 n n LED Status Explanation Blinking The router i s powered on and running normally . ACT (Activity) Off The router is powe red off. On Wireless access point is rea dy. WLAN Blinking It will blink while wireless traffic goes through. On The router i[...]

Vigor2710 Series User’s Guide 5 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When y ou see the ACT LED be gins to blink rapidly than usual, release the button. Th en th e router will restart with the factory default configuration[...]

Vigor2710 Series User’s Guide 6 1 1 . . 2 2 . . 3 3 F F o o r r V V i i g g o o r r 2 2 7 7 1 1 0 0 V V n n LED Status Explanation Blinking The router i s powered on and running normally . ACT (Activity) Off The router is powe red off. On Wireless access point is rea dy. WLAN Blinking It will blink while wireless traffic goes through. On The rout[...]

Vigor2710 Series User’s Guide 7 Interface Description Line Connector of analog phone for PSTN life line. Phone2/P hone1 Connecter of analog phon e for VoIP com munication . Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When y ou see the ACT LED be gins[...]

Vigor2710 Series User’s Guide 8 1 1 . . 3 3 H H a a r r d d w w a a r r e e I I n n s s t t a a l l l l a a t t i i o o n n Before starting to configure the router, you have to connect your devices correctly. 1. Connect the ADSL interface to the external ADSL splitter with an ADSL line cable for all models. For Vigor2710Vn, also connect Line inte[...]

Vigor2710 Series User’s Guide 9 Caution : 1. Each of the Phone ports can be connected to an analog phone o nly. Do not connect the phone ports to the land line jack . Such connection might damage your router. 2. When the power is shutdown, VoIP phone will be disconnected. However, a phone set connected to Phone 2 port can be used as the tradition[...]

Vigor2710 Series User’s Guide 10 4. Click Local printer attached to this computer and click Next. 5. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port . Click Next .[...]

Vigor2710 Series User’s Guide 11 6. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port nam e. Then, click Next . 7. Click Standard and choose Generic Network Card. 8. Then, in the following dialog, click Finish .[...]

Vigor2710 Series User’s Guide 12 9. Now, your system will ask you to choose right name of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC. When you finish the selection, click Next . 10. For the final stage, you need to go back to Control Panel-> Printers and edit the property of the new pr[...]

Vigor2710 Series User’s Guide 13 The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router. Note 1: Some printers with the fax/scanning or other additional fun ctions are not supported. If you do not know whether your pr inter is supported or not, please vi sit www.draytek.com to [...]

Vigor2710 Series User’s Guide 14 This page is left blank.[...]

Vigor2710 Series User’s Guide 15 2 C C o o n n f f i i g g u u r r i i n n g g B B a a s s i i c c S S e e t t t t i i n n g g s s For using the router properly, it is necessar y for you to change the password of web configuration for security and adjust primary basic settings. 2 2 . . 1 1 T T w w o o - - L L e e v v e e l l M M a a n n a a g g e[...]

Vigor2710 Series User’s Guide 16 2 2 . . 3 3 C C h h a a n n g g i i n n g g P P a a s s s s w w o o r r d d No matter user mode operation or admin mode operation, please change the password for the original security of the router. 1. Open a web browser on your PC and type http://192. 168.1.1. A pop-up window will open to ask for username and pas[...]

Vigor2710 Series User’s Guide 17 Main screen for user mode operation (simple configuration) Note: The home page will change slightly in accordance with the type of the router you have. 4. Go to System Maintenance page and choose Administrator Password/User Password . or 5. Enter the login password (the defa ult is blank) on the field of Old Passw[...]

Vigor2710 Series User’s Guide 18 2 2 . . 4 4 C C o o n n f f i i g g u u r r i i n n g g R R o o u u t t e e r r f f o o r r I I n n t t e e r r n n e e t t C C o o n n n n e e c c t t i i v v i i t t y y Open Internet Access page and then check whether the ISP settings are set correctly. Click PPPoE/PPPoA/MPoA/Multip-PVCs link to review the sett[...]

Vigor2710 Series User’s Guide 19 F F o o r r M M P P o o A A U U s s e e r r s s 1. Check if the Enable option is selected. 2. Check if DSL Modem Settings is set appropriately. 3. Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the values from your ISP) if you choose Specify an IP address .[...]

Vigor2710 Series User’s Guide 20 2 2 . . 5 5 O O n n l l i i n n e e S S t t a a t t u u s s The online status shows the system status, W AN status, ADSL Information and other status related to this router within one page. If you select PPPoE/PPPoA as the protocol, you will find out a link of Dial PPPoE or Drop PPPoE in the Online Status web page[...]

Vigor2710 Series User’s Guide 21 Online status for DHCP Detailed explanation is shown below: Primary DNS Displays the IP address of the primary DNS. Secondary DNS Displays the IP address of the secondary DNS. LAN Status IP Address Displays the IP address of the LAN interface. TX Packets Displays the total transmitted packets at the LAN interface.[...]

Vigor2710 Series User’s Guide 22 2 2 . . 6 6 S S a a v v i i n n g g C C o o n n f f i i g g u u r r a a t t i i o o n n Each time you click OK on the web page for saving the configurati on, you can find messages showing the system interaction with you. Ready indicates the system is ready for you to input settings. Settings Saved means your setti[...]

Vigor2710 Series User’s Guide 23 3 U U s s e e r r M M o o d d e e O O p p e e r r a a t t i i o o n n This chapter will guide users to execute simp le configuration through user mode operation. As for other examples of application, please refer to chapter 5. 1. Open a web browser on your PC and type http://192. 168.1.1. The window will ask for t[...]

Vigor2710 Series User’s Guide 24 As the router plays a role to manage and further protect its LAN, it interconnects groups of host PCs. Each of them has a private IP address assigned by the built-in DHCP server of the Vigor router. The router itself will also use the default private IP address: 192.168.1.1 to communicate with the local hosts. Mea[...]

Vigor2710 Series User’s Guide 25 Enable/Disable Click Enable for activating this function. If you click Disable , thi s function will be closed and all the settings that you adjusted in this page will be invalid. DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital for building DSL connection to your IS P. Multi-PVC [...]

Vigor2710 Series User’s Guide 26 Username – Type in the username provided by ISP in this field. Password – Type in the password provided by ISP in this field. PPP Authentication – Select PAP only or PAP or CHAP for PPP. Idle Timeout – Set the timeout for breaking down the Internet after passing through the time without any action. This se[...]

Vigor2710 Series User’s Guide 27 MPoA (RFC1483/2684) Click Enable for activating this function. If you click Disable , this function will be closed and all the settings that you adjusted in this page will be invalid. DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital for building DSL connection to your IS P. Multi-[...]

Vigor2710 Series User’s Guide 28 Subnet Mask – Type in the subnet mask. Gateway IP Address – Type in gateway IP address. Default MAC Address Type in MAC address for the router. You can use Default MAC Address or spec ify another MAC address for your necessity. MAC Address – Type in the MAC address for the router manually. DNS Server IP Addr[...]

Vigor2710 Series User’s Guide 29 3 3 . . 2 2 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p This page provides you the general settings for LAN. Click LAN to open the LAN settings page and choose General Setup . IP Address T ype in private IP address for connecting to a local private network (Default: 192.168.1.1). Subnet Mask T ype in a[...]

Vigor2710 Series User’s Guide 30 of the router , which means the router is the default gateway . DHCP Se rver IP Addr ess for Relay Agent - Set the IP address of the DHCP server you are going to use so the Relay Agent can help to forward the DHCP request to the DHCP server . DNS Server Configuration DNS stands for Domain Name System. Every Intern[...]

Vigor2710 Series User’s Guide 31 z Save cost on applying public IP address and apply efficient usage of IP address. NAT allows the internal IP addresses of local hosts to be translated into one public IP address, thus you can have only one IP address on behalf of the entire internal hosts. z Enhance security of the internal network by obscuring t[...]

Vigor2710 Series User’s Guide 32 Press any number under Index to access into next page for configuring port redirection. Enable Check this box to enable su ch port redirection setting. Mode Two options (Single and Range) are provided here for you to choose. To set a range for the specific service, select Range . In Range mode, if the public port [...]

Vigor2710 Series User’s Guide 33 Private Port Specify the private port number of the service offered by the internal host. Active Check this box to activate the port-mapping entry you have defined. Note that the router has its own built-in servi ces (servers) such as T elnet, HTTP and FTP etc. Since the common port numbers of these services (serv[...]

Vigor2710 Series User’s Guide 34 Private IP Enter the private IP address of the DMZ host, or click Choose PC to select one. Choose PC Click this button and then a window will autom atically pop up, as depicted below. The window consists of a list of private IP addresses of all hosts in your LAN network. Select one private IP address in the list t[...]

Vigor2710 Series User’s Guide 35 3 3 . . 3 3 . . 3 3 O O p p e e n n P P o o r r t t s s Open Ports allows you to open a range of ports for the traffic of special applications. Common application of Open Ports includes P2 P application (e.g., BT, KaZaA, Gnutella, WinMX, eMule and others), Internet Camera etc. Ensure that you keep the application [...]

Vigor2710 Series User’s Guide 36 Enable Open Ports Check to enable this entry. Comment Make a name for the defined network application/service. Local Computer Enter the private IP address of the local host or click Choose PC to select one. Choose PC Click this button and, subseque ntly, a window having a list of private IP addresses of local host[...]

Vigor2710 Series User’s Guide 37 supplied by most popular DDNS service providers such as www.dyndns.org, www.no-ip.com, www.dtdns.com, www.change ip.com, www.dynamic- name server.com. You should visit their websites to register your own domain nam e for the router. Enable the Function and Add a Dynamic DNS Account 1. Assume you have a registered [...]

Vigor2710 Series User’s Guide 38 Enable Dynamic DNS Account Check this box to enable the current account. If you did check the box, you will see a ch eck mark appeared on the Active column of the previous web page in step 2). WAN Interface Select the WAN interface or der to apply settings here. Service Provider Select the service provider for the[...]

Vigor2710 Series User’s Guide 39 3 3 . . 4 4 . . 2 2 U U P P n n P P The UPnP (Universal Plug and Play) protocol is supported to bring to network connected devices the ease of installation and configurati on which is already available for directly connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT routers[...]

Vigor2710 Series User’s Guide 40 The reminder as regards concern about Firewall and UPnP Can't work with Firewall Software Enabling firewall applications on your P C may cause the UPnP function not working properly. This is because these applicati ons will block the accessing ability of some network ports. Security Considerations Activating [...]

Vigor2710 Series User’s Guide 41 networks), while the MGCP protocol uses c lient-server architecture, the calling scenario being very similar to the current PSTN/ISDN network. After a call is setup, the voice streams transmit via RTP (Real-Time Transport Protocol). Different codecs (methods to compress and en code the voice) can be embedded into [...]

Vigor2710 Series User’s Guide 42 QoS Assurance assists to assign high priori ty to voice traffic via Internet. You will always have the required inbound and outbound bandwidth that is prioritized exclusively for Voice traffic over Internet but you just get your data a little slower and it is tolerable for data traffic. 3 3 . . 5 5 . . 1 1 D D i i[...]

Vigor2710 Series User’s Guide 43 Click any index number to display the dial plan setup page. Enable Click this to enable this entry. Phone Number The speed-dial number of this index. This can be any number you choose, using digits 0- 9 and * . Display Name The Caller-ID that you want to be displayed on your friend’s screen. This let your friend[...]

Vigor2710 Series User’s Guide 44 the same SIP server, sometimes, the VoIP phone call connection may not succeed. By using the specified dial out account, the successful connection can be assured. Loop through For the model of Vigor 2710Vn, the selection should be as the following: Backup Phone Number When the VoIP phone is obstructs or the Intern[...]

Vigor2710 Series User’s Guide 45 D D i i g g i i t t M M a a p p For the convenience of user, this page allows users to edit prefix number for the SIP account with adding number, stripping number or replacing number. It is used to help user having a quick and easy way to dial out through VoIP interface. Enable Check this box to invoke this settin[...]

Vigor2710 Series User’s Guide 46 specific VoIP interface. Take the above picture (Prefix Table Setup web page) as an example, the prefix number of 03 will be replaced by 8863. For example: dial number of “031111111” will be changed to “88631111111” and sent to SIP server. OP Number The front number you type here is the first part of the a[...]

Vigor2710 Series User’s Guide 47 Enable Click this to enable this entry. Call Direction Determine the direction for the phone call, IN – incoming call, OUT-outgoing call, IN & OUT – both incoming and outgoing calls. Barring Type Determine the type of the VoIP phone call, URI/URL or number. Specific URI/URL or Specific Number This field wi[...]

Vigor2710 Series User’s Guide 48 For Block Unknown Domain – this function can block incomi ng calls (through Phone port) from unrecognized domain that is not specified in SIP accounts. Such control also can be done based on preconfigured schedules. For Block IP Address – this function can block incoming calls (through Phone port) com ing from[...]

Vigor2710 Series User’s Guide 49 Last Call Return [Miss] Sometimes, people might miss some phone calls. Please dial number typed in this field to know where the last phone call comes from and call back to that one. Last Call Return [In] You have finished an incoming phone call, however you want to call back again for some reason. Please dial numb[...]

Vigor2710 Series User’s Guide 50 Block Last Calls [Act] Dial the number typed in this field to bl ock the last incoming phone call. P P S S T T N N S S e e t t u u p p Some emergency phone (e.g., 911) or special phone cannot be dialed out b y using VoIP and can be called out through PSTN line only. To solv e this problem, this page allows you to [...]

Vigor2710 Series User’s Guide 51 Index Click this link to access into next page for setting SIP account. Profile Display the profile name of the account. Domain/Realm Display the domain name or IP address of the SIP registrar server. Proxy Display the domain name or IP address of the SIP proxy server. Account Name Display the account name of SIP [...]

Vigor2710 Series User’s Guide 52 Profile Name Assign a name for this profile for identifying. You can t ype similar name with the domain. For example, if the domain name is draytel.org , then you m ight set draytel-1 in this field. Register via If you want to make VoIP call without register personal information, please choose None and check the b[...]

Vigor2710 Series User’s Guide 53 Authentication ID Check the box to invoke this function and enter the name or number used for SIP Authorization with SIP Registrar. If this setting value is the same as Account Name, it is not necessary for you to check the box and set any value in this field. Password The password provided to you when you registe[...]

Vigor2710 Series User’s Guide 54 3 3 . . 5 5 . . 3 3 P P h h o o n n e e S S e e t t t t i i n n g g s s This page allows user to set phone settings fo r Phone 1 and Phone 2 respectively. However, it changes slightly according to different model you have. For Vigor2710V/Vigor2710Vn models, you will see the following page: Phone List Port – ther[...]

Vigor2710 Series User’s Guide 55 drop down list to choose any one of them. D D e e t t a a i i l l e e d d S S e e t t t t i i n n g g s s f f o o r r P P h h o o n n e e P P o o r r t t Click the number link for Phone port, you can access into t he following page for configuring Phone settings. Hotline Check the box to enable it. Type in the SIP[...]

Vigor2710 Series User’s Guide 56 forwarded to the SIP URL by the time out. SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or abc@iptel.org) as the site for call forwarded. Time Out – Set the time out for the call forwarding. The default setting is 30 sec. DND (Do Not Disturb) mode Set a period of peace time without disturbing by VoIP ph[...]

Vigor2710 Series User’s Guide 57 Voice Active Detector - This function can detect if the voice on both sides is active or not. If not, the router will do something to save the bandwidth for other using. Click On to invoke this function; click off to close the function. Default SIP Account You can set SIP accounts (up to six groups) on SIP Account[...]

Vigor2710 Series User’s Guide 58 VoIP phone. Also, you can specify each field for your necessity. It is recommended for you to use the default settings for VoIP communication. Volume Gain Mic Gain (1-10)/Speaker Gain (1-10) - Adjust the volume of microphone and speaker by entering number from 1- 10. The larger of the number, the louder the volume[...]

Vigor2710 Series User’s Guide 59 the default value was 101. This setting is available for the OutBand (RFC2833) mode. 3 3 . . 5 5 . . 4 4 S S t t a a t t u u s s From this page, you can find codec, connection and ot her important call status for each port. Refresh Seconds Specify the interval of refresh time to obtain the latest VoIP calling info[...]

Vigor2710 Series User’s Guide 60 Tx Pkts Total number of transmitted voice packets during t his connection session. Rx Pkts Total number of received voice packets during this connection session. Rx Losts Total number of lost packets during this connection session. Rx Jitter The jitter of received voice packets. In Calls Accumulation for the times[...]

Vigor2710 Series User’s Guide 61 S S e e c c u u r r i i t t y y O O v v e e r r v v i i e e w w Real-time Hardware Encryption: Vigor Router is equipped with a hardware AES encryption engine so it can apply the highest pr otection to your data without influencing user experience. Complete Security Standard Selection: To ensure the security and pr[...]

Vigor2710 Series User’s Guide 62 3 3 . . 6 6 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p By clicking the General Settings , a new web page will appear so that you could configure the SSID and the wireless channel. Please refer to the following figure for more information. Enable Wireless LAN Check the box to enable wireless function. [...]

Vigor2710 Series User’s Guide 63 Packet-OVERDRIVE This feature can enhance the performance in data transmission about 40%* m ore (by checking Tx Burs t). It is active only when both sides of Access Point and Station (in wireless client) invoke this function at the same time. That is, the wireless client must support this feature and invoke the fu[...]

Vigor2710 Series User’s Guide 64 with 128 bit sync field. However, some original 11b wireless network devices only support long preamble. Check it to use Long Preamble if needed to communicate with this kind of devices. 3 3 . . 6 6 . . 3 3 S S e e c c u u r r i i t t y y By clicking the Security Settings , a new web page will appear so that you c[...]

Vigor2710 Series User’s Guide 65 negotiated via 802.1x authentication. Either 8~63 ASCII characters, such as 012345678(or 64 Hexadecimal digits leading by 0x, such as "0x321253abcde..."). Type - Select from Mixed (WPA+WPA2) or WPA2 only. Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such as 012345678..(or 64 Hexadecimal digits le[...]

Vigor2710 Series User’s Guide 66 Policy Select to enable any one of the following policy. Choose Activate MAC address filter to type in the MAC addresses for other clients in the network manually. Choose Isolate WLAN from LAN will separate all the WLAN stations from LAN based on the MAC Address list. MAC Address Filter Display all MAC addresses t[...]

Vigor2710 Series User’s Guide 67 3 3 . . 6 6 . . 5 5 S S t t a a t t i i o o n n L L i i s s t t Station List provides the knowledge of connecting wire less clients now along with its status code. There is a code summary belo w for explanation. For convenient Access C ontrol , you can select a WLAN station and click Add to Access Control below. R[...]

Vigor2710 Series User’s Guide 68 Model Name Display the model name of the router. Firmware Version Display the firmware version of the router. Build Date/Time Display the date and time of the current firmware build. ADSL Firmware Version Display the ADSL firmware version. LAN------- MAC Address Display the MAC address of the LAN Interface. 1 st I[...]

Vigor2710 Series User’s Guide 69 Firmware Version It indicates information about equipped WLAN miniPCi card. This also helps to provide availability of some features that are bound with some WLAN miniPCi. SSID Display the SSID of the router. 3 3 . . 7 7 . . 2 2 U U s s e e r r P P a a s s s s w w o o r r d d This page allows you to set ne w passw[...]

Vigor2710 Series User’s Guide 70 Time Zone Select the time zone where the router is located. Enable Daylight Saving Check the box to activate daylight saving function. Such feature is useful for some areas. Automatically Update Interval Select a time interval for updating from the NTP server. Click OK to save these settings. 3 3 . . 7 7 . . 4 4 R[...]

Vigor2710 Series User’s Guide 71 3 3 . . 8 8 . . 1 1 D D H H C C P P T T a a b b l l e e The facility provides information on IP address as signments. This information is helpful in diagnosing network problems, such as IP address conflicts, etc. Click Diagnostics and click DHCP Table to open the web page. Index It displays the connection item num[...]

Vigor2710 Series User’s Guide 72 IP Address Type in the IP address of the Host/IP that you want to ping. Run Click this button to start the ping work. The result will be displayed on the screen. Clear Click this lin k to remove the result on the window. 3 3 . . 8 8 . . 3 3 T T r r a a c c e e R R o o u u t t e e Click Diagnostics and click Trace [...]

Vigor2710 Series User’s Guide 73 4 A A d d m m i i n n M M o o d d e e O O p p e e r r a a t t i i o o n n This chapter will guide users to execute adva nced (full) configuration thr ough admin mode operation. As for other examples of application, please refer to chapter 5. 1. Open a web browser on your PC and type http://192. 168.1.1. The window[...]

Vigor2710 Series User’s Guide 74 As the router plays a role to manage and further protect its LAN, it interconnects groups of host PCs. Each of them has a private IP address assigned by the built-in DHCP server of the Vigor router. The router itself will also use the default private IP address: 192.168.1.1 to communicate with the local hosts. Mea[...]

Vigor2710 Series User’s Guide 75 Enable/Disable Click Enable for activating this function. If you click Disable , thi s function will be closed and all the settings that you adjusted in this page will be invalid. DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital for building DSL connection to your IS P. Multi-PVC [...]

Vigor2710 Series User’s Guide 76 Password – Type in the password provided by ISP in this field. PPP Authentication – Select PAP only or PAP or CHAP for PPP. Idle Timeout – Set the timeout for breaking down the Internet after passing through the time without any action. This setting is active only when the Active on demand option for Active [...]

Vigor2710 Series User’s Guide 77 MPoA (RFC1483/2684) Click Enable for activating this function. If you click Disable , this function will be closed and all the settings that you adjusted in this page will be invalid. DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital for building DSL connection to your IS P. Multi-[...]

Vigor2710 Series User’s Guide 78 4 4 . . 1 1 . . 4 4 M M u u l l t t i i - - P P V V C C s s This router allows you to create multi-PVCs for different data transferring for using. Simply go to Internet Access and select Multi-PVC Setup page. G G e e n n e e r r a a l l The system allows you to set up to eight cha nnels which are ready for choosin[...]

Vigor2710 Series User’s Guide 79 Encapsulation Choose a proper type for this channel. The types will be different according to the protocol setting that you choose. WAN link for Channel 3, 4, 5 are provided for router-borne applic ation such as TR069 and VoIP. The settings must be applied and obtained from your ISP. For your special request, plea[...]

Vigor2710 Series User’s Guide 80 VCI - Type in the value provided by ISP. QoS Type -Select a proper QoS type for the channel. Protocol - Select a proper protocol for this channel. There are three options, PPPoE, PPPoA and MPoA for you to select. The following settings will be changed according to the protocol selected here. Encapsulating Type - D[...]

Vigor2710 Series User’s Guide 81 A A T T M M Q Q o o S S Such configuration is applied to upstream packets. Such information will be provided by ISP. Please contact with your ISP for detailed information. QoS Type Select a proper QoS type for the channel according to the information that your ISP provides. PCR It represents Peak Cell R ate. The d[...]

Vigor2710 Series User’s Guide 82 P P o o r r t t - - b b a a s s e e d d B B r r i i d d g g e e General page lets you set the first PVC. As to set the second PVC line, please click the Port-based Bridge tab to open Bridge configuration page. Enable Check this box to enable that cha nnel. Only channel 3 to 8 can be set in this page, for channel 1[...]

Vigor2710 Series User’s Guide 83 4 4 . . 2 2 L L A A N N Local Area Network (LAN) is a group of subnets regulated and ruled by router . The design of network structure is related to what t ype of public IP addresses coming from your ISP . 4 4 . . 2 2 . . 1 1 B B a a s s i i c c s s o o f f L L A A N N The most generic function of V igor router is[...]

Vigor2710 Series User’s Guide 84 4 4 . . 2 2 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p This page provides you the general settings for LAN. Click LAN to open the LAN settings page and choose General Setup . 1st IP Addr ess T ype in private IP address for connecting to a local private network (Default: 192.168.1.1). 1st Subnet Mask T[...]

Vigor2710 Series User’s Guide 85 If you want to use another DHCP server in the network other than the V igor Router ’ s, you can let Relay Agent help you to redirect the DHCP request to the specified location. Enable Server - Let the router assign IP address to every host in the LAN. Disable Server – Let you manually assign IP address to ever[...]

Vigor2710 Series User’s Guide 86 4 4 . . 2 2 . . 3 3 V V L L A A N N Virtual LAN function provides you a very conve nient way to ma nage hosts by grouping them based on the physical port. Go to LAN page and select VLAN . The following page will appear. Click Enable to invoke VLAN function. To add or remove a VLAN, please refer to the following ex[...]

Vigor2710 Series User’s Guide 87 4 4 . . 2 2 . . 4 4 B B i i n n d d I I P P t t o o M M A A C C This function is used to bind the IP and MAC address in LAN to have a strengthening control in network. When this function is enabled, all the assigned IP and MAC address binding together cannot be changed. If you m odified the binding IP or MAC addre[...]

Vigor2710 Series User’s Guide 88 Edit It allows you to edit and modify the selected IP address and MAC address that you create before. Remove You can remove any item listed in IP Bind List . Simply click and select the one, and click Remove . The selected item will be removed from the IP Bind List . Note: Before you select Strict Bind , you have [...]

Vigor2710 Series User’s Guide 89 The port redirection can only apply to incoming traffic. To use this function, please go to NAT page and choose Port Redirection web page. The Port Redirection Table provides 20 port-m apping entries for the internal hosts. Press any number under Index to access into next page for configuring port redirection.[...]

Vigor2710 Series User’s Guide 90 Enable Check this box to enable su ch port redirection setting. Mode Two options (Single and Range) are provided here for you to choose. To set a range for the specific service, select Range . In Range mode, if the public port (s tart port and end port) and the starting IP of private IP had been entered, the syste[...]

Vigor2710 Series User’s Guide 91 4 4 . . 3 3 . . 2 2 D D M M Z Z H H o o s s t t As mentioned above, Port Redirection can redirect incoming TCP/UDP or othe r traffic on particular ports to the specific private IP address/port of host in the LAN. However, other IP protocols, for example Protocols 50 (ESP) and 51 (A H), do not travel on a fixed por[...]

Vigor2710 Series User’s Guide 92 Click DMZ Host to open the following page: Private IP Enter the private IP address of the DMZ host, or click Choose PC to select one. Choose PC Click this button and then a window will autom atically pop up, as depicted below. The window consists of a list of private IP addresses of all hosts in your LAN network. [...]

Vigor2710 Series User’s Guide 93 4 4 . . 3 3 . . 3 3 O O p p e e n n P P o o r r t t s s Open Ports allows you to open a range of ports for the traffic of special applications. Common application of Open Ports includes P2 P application (e.g., BT, KaZaA, Gnutella, WinMX, eMule and others), Internet Camera etc. Ensure that you keep the application [...]

Vigor2710 Series User’s Guide 94 Enable Open Ports Check to enable this entry. Comment Make a name for the defined network application/service. Local Computer Enter the private IP address of the local host or click Choose PC to select one. Choose PC Click this button and, subseque ntly, a window having a list of private IP addresses of local host[...]

Vigor2710 Series User’s Guide 95 4 4 . . 4 4 F F i i r r e e w w a a l l l l 4 4 . . 4 4 . . 1 1 B B a a s s i i c c s s f f o o r r F F i i r r e e w w a a l l l l While the broadband users demand more bandwidth f or multimedia, interactive applications, or distance learning, security has been always the most concerned. The firewall of the Vigor[...]

Vigor2710 Series User’s Guide 96 S S t t a a t t e e f f u u l l P P a a c c k k e e t t I I n n s s p p e e c c t t i i o o n n ( ( S S P P I I ) ) Stateful inspection is a firewall architecture that works at the network layer. Unlike legacy static packet filtering, which examines a p acket based on the information in its header, stateful inspec[...]

Vigor2710 Series User’s Guide 97 4 4 . . 4 4 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p General Setup allows you to adjust setti ngs of IP Filter and common options. Here you can enable or disable the Call Filter or Data Filter . Under some circumstance, your filter set can be linked to work in a serial manner. So here you assign the[...]

Vigor2710 Series User’s Guide 98 box. It will be sent to Syslog server . Please ref er to section Syslog/Mail Alert for more detailed information. W eb Content Filter Select one of the W eb Content Filter profile settings (created in CSM>> W eb Content Filter ) for applying with this router . Please set at least one profile for anti-virus i[...]

Vigor2710 Series User’s Guide 99 be. However , if the network is not stable, sm all value will be proper . Session timeout –Setting timeout for sessions can make the best utilization of network resources. However , Queue timeout is configured for TCP protocol onl y; session timeout is configured for the data flow which matched with the firewall[...]

Vigor2710 Series User’s Guide 100 Comment Enter filter set comments/description. Maximum length is 23–character long. Move Up/Down Use Up or Down link to m ove the order of the filter rules. Next Filter Set Set the link to the next filter set to be executed after the current filter run. Do not make a loop with many filter sets. To edit Filter R[...]

Vigor2710 Series User’s Guide 101 To set the IP address manually, please choose Any Address/Single Address/Range Address/Subnet Address as the Address Ty pe and type them in this dialog. In addition, if you want to use the IP range from defined groups or objects, please choose Group and Objects as the Address Type. From the IP Group drop down lis[...]

Vigor2710 Series User’s Guide 102 the Service Type and type them in this dialog. In ad dition, if you want to use the service type from defined groups or objects, please choose Group and Objects as the Service Type. Protocol - Specify the protocol(s) which this filter rule will apply to. Source/Destination Port - (=) – when the first and last v[...]

Vigor2710 Series User’s Guide 103 Filter web page first. For troubleshooting needs, you can specify to record information for URL Content Filter by checking the Log box. It will be sent to Syslog server . Please ref er to section 3.12.5 Syslog/Mail Alert for more detailed information. W eb Content Filter Select one of the W eb Content Filter prof[...]

Vigor2710 Series User’s Guide 104 Window size – It determines the size of TCP protocol (0~65535). The m ore the value is, the better the performance will be. However , if the network is not stable, sm all value will be proper . Session timeout –Setting timeout for sessions can make the best utilization of network resources. However , Queue ti[...]

Vigor2710 Series User’s Guide 105 E E x x a a m m p p l l e e As stated before, all the traffic will be separate d and arbitrated using on of two IP filters: call filter or data filter. You may preset 12 call filters and data filters in Filter Setup and even link them in a serial manner. Each filter set is composed by 7 filter rules, which can be[...]

Vigor2710 Series User’s Guide 106 4 4 . . 4 4 . . 4 4 D D o o S S D D e e f f e e n n s s e e As a sub-functionality of IP Filter/Firewall, th ere are 15 types of detect/ defense function in the DoS Defense setup. The DoS Defense functionality is disabled for default. Click Firewall and click DoS Defense to open the setup page. Enable Dos Defense[...]

Vigor2710 Series User’s Guide 107 detection many ports in an attempt to find ignorant services would respond. Check the box to activate the Port Scan detection. Whenever detecting this malicious exploration behavior by monitoring the port-scanning Threshold rate, the Vigor router will send out a warning. By default, the Vigor router sets the thre[...]

Vigor2710 Series User’s Guide 108 Block Unknown Protocol Check the box to activate the Block Unknown Protocol function. Individual IP packet has a protocol field in the datagram header to indicate the protocol type running over the upper layer. However, the protocol types greater than 100 are reserved and undefined at this time. Therefore, the ro[...]

Vigor2710 Series User’s Guide 109 4 4 . . 5 5 O O b b j j e e c c t t s s S S e e t t t t i i n n g g s s For IPs in a range and service ports in a limited range usually will be applied in configuri ng router’s settings, therefore we can define them with objects and bind them with groups for using conveniently. Later, we can select that object/[...]

Vigor2710 Series User’s Guide 110 Name Type a name for this profile. Maximum 15 characters are allowed. Interface Choose a proper interface (WAN, LAN or Any). For example, the Direction setting in Edit Filter Rule will ask you specify IP or IP range for WAN or LAN or any IP address. If you choose LAN as the Interface here, and choose LAN as the d[...]

Vigor2710 Series User’s Guide 111 4 4 . . 5 5 . . 2 2 I I P P G G r r o o u u p p This page allows you to bind several IP objects into one IP group. Set to Factory Default Clear all profiles. Click the number under Index colu mn for settings in detail.[...]

Vigor2710 Series User’s Guide 112 Name Type a name for this profile. Maximum 15 characters are allowed. Interface Choose WAN, LAN or Any to display all the available IP objects with the specified interface. Available IP Objects All the available IP objects with the specified interface chosen above will be shown in this box. Selected IP Objects Cl[...]

Vigor2710 Series User’s Guide 113 4 4 . . 5 5 . . 3 3 S S e e r r v v i i c c e e T T y y p p e e O O b b j j e e c c t t You can set up to 96 sets of Service Type Objects with different conditions. Set to Factory Default Clear all profiles. Click the number under Index co lumn for settings in detail. Name Type a name for this profile. Protocol S[...]

Vigor2710 Series User’s Guide 114 (=) – when the first and last value are the same, it indicates one port; when the first and last values are different, it indicates a range for the port and available for this profile. (!=) – when the first and last value are the same, it indicates all the ports except the port defined here; when th e first a[...]

Vigor2710 Series User’s Guide 115 Name Type a name for this profile. Available Service Type Objects All the available service objects that you have added on Objects Setting>>Service Type Object will be shown in this box. Selected Service Type Objects Click >> button to add the selected IP objects in this box. 4 4 . . 5 5 . . 5 5 K K e[...]

Vigor2710 Series User’s Guide 116 Name Type a name for this profile, e.g., game. Contents Type the content for such profile. For example, type gambling as Contents. When you browse th e webp age, the page with gambling information will be watched out and be passed/blocked based on the configuration on Firewall settings. 4 4 . . 5 5 . . 6 6 K K e [...]

Vigor2710 Series User’s Guide 117 Name Type a name for this group. Available Keyword Objects You can gather keyword objects from Keyword Object page within one keyword group. All the available Keyword objects that you have created will be shown in this box. Selected Keyword Objects Click button to add the selected Keyword objects in this box. 4 4[...]

Vigor2710 Series User’s Guide 118 Profile Name Type a name for this profile. Type a name for such profile and check all the items of file extension that will be processed in the router. Finally, click OK to save this profile.[...]

Vigor2710 Series User’s Guide 119 4 4 . . 5 5 . . 8 8 I I M M O O b b j j e e c c t t This page allows you to set 32 profiles for In stant Messenger. These profiles will be applied in CSM>>IM/P2P Filter Profile for filtering. Set to Factory Default Clear all profiles. Click the number under Profile column for conf iguration in details. Ther[...]

Vigor2710 Series User’s Guide 120 4 4 . . 5 5 . . 9 9 P P 2 2 P P O O b b j j e e c c t t This page allows you to set 32 profiles for p eer-to-peer application. These profiles will be applied in CSM>>IM/P2P Filter Profile for filtering. Set to Factory Default Clear all profiles. Click the number under Profile column for conf iguration in de[...]

Vigor2710 Series User’s Guide 121 Type a name for such profile and check all the protocols that not allowed to be used in the host. Finally, click OK to save this profile. 4 4 . . 5 5 . . 1 1 0 0 M M i i s s c c O O b b j j e e c c t t This page allows you to set 32 profiles for mi scellaneous applications. These profiles will be applied in CSM&g[...]

Vigor2710 Series User’s Guide 122 4 4 . . 6 6 C C S S M M P P r r o o f f i i l l e e C C o o n n t t e e n n t t S S e e c c u u r r i i t t y y M M a a n n a a g g e e m m e e n n t t ( ( C C S S M M ) ) CSM is an abbreviation of Content Security Management which is used to control IM/P2P usage, filter the web content and URL conten t to reach [...]

Vigor2710 Series User’s Guide 123 checked against our server database. This data base is updated as frequent as daily by a global team of Internet researchers. The server will look up the URL and return a category to your router. Your Vigor router will then decide whethe r to allow access to this site according to the categories you have selected[...]

Vigor2710 Series User’s Guide 124 Each profile can contain three objects settings, IM Object, P2P Object and Misc Object. Such profile can be applied in the Firewall>>General Setup and Firewall>>Filter Setup pages as the standard for the host(s) to follow. 4 4 . . 6 6 . . 2 2 U U R R L L C C o o n n t t e e n n t t F F i i l l t t e e[...]

Vigor2710 Series User’s Guide 125 Profile Name Type the name for such profile. Priority It determines the action that this router will apply. Both: Pass – The router will let all the packages that match with the conditions specified in URL Access Control and Web Feature below passing through. When you choose this setting, both configuration set[...]

Vigor2710 Series User’s Guide 126 All – All the actions (Pass and Block) will be recorded in Syslog. URL Access Control Enable URL Access Control - Check the box to activate URL Access Control. Note that the priority for URL A ccess Control is higher than Restrict Web Feature . If the web content match the setting set in URL Access Control, the[...]

Vigor2710 Series User’s Guide 127 keyword list, the more efficiently the Vigor router perform. Web Feature Enable Restrict Web Feature - Check this box to make the keyword being blocked or passed. Action - This setting is available only when Either : URL Access Control First or Either : Web Feature Firs is selected. Pass allows accessing into the[...]

Vigor2710 Series User’s Guide 128 4 4 . . 6 6 . . 3 3 W W e e b b C C o o n n t t e e n n t t F F i i l l t t e e r r P P r r o o f f i i l l e e We all know that the content on the Internet just like other types of media may be inappropriate sometimes. As a responsible pare nt or employer, you should protect those in your trust against the hazar[...]

Vigor2710 Series User’s Guide 129 Action Pass - allow accessing into the corr esponding webpage with the categories listed on the box below. Block - restrict accessing into the corresponding webpage with the categories listed on the box below. If the web pages do not match with the specified feature set here, it will be processed with reverse act[...]

Vigor2710 Series User’s Guide 130 4 4 . . 7 7 B B a a n n d d w w i i d d t t h h M M a a n n a a g g e e m m e e n n t t Below shows the menu items for Bandwidth Management. 4 4 . . 7 7 . . 1 1 S S e e s s s s i i o o n n s s L L i i m m i i t t A PC with private IP address can access to the Internet via NAT router. The router will generate the [...]

Vigor2710 Series User’s Guide 131 Maximum Sessions Defines the available session number for each host in the specific range of IP addresses. If you do not set the session number in this field, the system will use the default session limit for the specific limitation you set for each index. Add Adds the specific session limitation onto the list ab[...]

Vigor2710 Series User’s Guide 132 Limitation List Display a list of specific limitations that you set on this web page. Start IP Define the start IP address for limit bandwidth. End IP Define the end IP address for lim it bandwidth. TX limit Define the limitation for the speed of the upstream. If you do not set the limit in this field, the system[...]

Vigor2710 Series User’s Guide 133 4 4 . . 8 8 A A p p p p l l i i c c a a t t i i o o n n s s Below shows the menu items for Applications. 4 4 . . 8 8 . . 1 1 D D y y n n a a m m i i c c D D N N S S The ISP often provides you with a dynamic IP address when you c onnect to the Internet via your ISP. It means that the public IP address assigned to [...]

Vigor2710 Series User’s Guide 134 Domain Name Display the domain name that you set on the setting page of DDNS setup. Active Display if this account is active or inactive. View Log Display DDNS log status. Force Update Force the router updates its information to DDNS server. 7. Select Index number 1 to add an account for the router. Check Enable [...]

Vigor2710 Series User’s Guide 135 4 4 . . 8 8 . . 2 2 S S c c h h e e d d u u l l e e The Vigor router has a built-in real time clock which can update itself manually or automatically by means of Network Time Protocols (NTP). As a re sult, you can not only schedule the router to dialup to the Internet at a specified time, but also restrict Intern[...]

Vigor2710 Series User’s Guide 136 Enable Schedule Setup Check to enable the schedule. Start Date (yyyy-mm-dd) Specify the starting date of the schedule. Start Time (hh:mm) Specify the starting time of the schedule. Duration Time (hh:mm) Specify the duration (or period) for the schedule. Action Specify which action Call Schedule should apply durin[...]

Vigor2710 Series User’s Guide 137 UPnP is available on Windows XP and the router provide the associated support for MSN Messenger to allow full use of the voice, video and messaging features. Enable UPNP Service Accordingly , you can enable either the Connection Contr ol Service or Connection S tatus Service . After setting Enable UPNP Service se[...]

Vigor2710 Series User’s Guide 138 The reminder as regards concern about Firewall and UPnP Can't work with Firewall Software Enabling firewall applications on your P C may cause the UPnP function not working properly. This is because these applicati ons will block the accessing ability of some network ports. Security Considerations Activating[...]

Vigor2710 Series User’s Guide 139 Enable IGMP Proxy Check this box to enable this function. The application of multicast will be executed through WAN port. Enable IGMP Snooping Check this box to enable this function. Multicast traffic will be forwarded to ports that have members of that group. Disabling IGMP snooping will make multicast traffic t[...]

Vigor2710 Series User’s Guide 140 Wake Up Click this button to wake up the selected IP. See the following figure. The result will be shown on the box.[...]

Vigor2710 Series User’s Guide 141 4 4 . . 9 9 V V P P N N a a n n d d R R e e m m o o t t e e A A c c c c e e s s s s A Virtual Private Network (VPN) is the extension of a private network that encompasses links across shared or public networks like th e Internet. In short, by VPN technology, you can send data between two computers across a shared[...]

Vigor2710 Series User’s Guide 142 Profile Name Type in a name in this file. Accept Any Peer ID Click to accept any peer regardless of its identity. Accept Subject Alternative Name Click to check one specific field of digital signature to accept the peer with matching value. The field can be IP Address, Domain, or E-mail Address . The box under th[...]

Vigor2710 Series User’s Guide 143 4 4 . . 9 9 . . 2 2 L L A A N N t t o o L L A A N N Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles. You may set parameters including sp ecified connection direction (dial-in or dial-out), connection peer ID, connection ty pe (VPN connection - including PPT P, IPSec Tunnel[...]

Vigor2710 Series User’s Guide 144 Profile Name Specify a name for the profile of the LAN-to-LAN connection. Enable this profile Check here to activate this profile. Netbios Naming Packet Pass – click it to have an inquiry for data transm ission between the hosts located on both sides of VPN Tunnel while connecting. Block – When there is confl[...]

Vigor2710 Series User’s Guide 145 Enable PING to Keep Alive is used to handle abnormal IPSec VPN connection disruption. It will help to prov ide the state of a VPN connection for router’s judgment of redial. Normally, if any one of VPN peers wants to disconnect the connection, it should follow a serial of packet exchange procedure to inform eac[...]

Vigor2710 Series User’s Guide 146 High (ESP-Encapsulating Security Payload)- means payload (data) will be encrypted and authenticated. Select from below: DES without Authentication -Use DES encryption algorithm and not apply any authentication scheme. DES with Authentication- Use DES encryption algorithm and apply MD5 or SHA-1 authentication algo[...]

Vigor2710 Series User’s Guide 147 Perfect Forward Secret (PFS)- The IKE Phase 1 key will be reused to avoid the computation complexity in phase 2. The default value is inactive this function. Local ID - In Aggressive mode, Local ID is on behalf of the IP address while identity authenticating with remote VPN server. The length of the ID is limited[...]

Vigor2710 Series User’s Guide 148 4 4 . . 9 9 . . 3 3 C C o o n n n n e e c c t t i i o o n n M M a a n n a a g g e e m m e e n n t t You can find the summary table of all VPN connections. You may disconnect any VPN connection by clicking Drop button. You m ay also aggressively Dial-out by using Dial-out Tool and clicking Dial button. Dial Click [...]

Vigor2710 Series User’s Guide 149 4 4 . . 1 1 0 0 C C e e r r t t i i f f i i c c a a t t e e M M a a n n a a g g e e m m e e n n t t A digital certificate works as an electronic ID, which is issued by a certification authority (CA). It contains information such as your name, a serial number, expiration dates etc., and the digital signature of th[...]

Vigor2710 Series User’s Guide 150 Type in all the information that the window request. Then click Generate again. Import Click this button to import a saved file as the certification information. Refresh Click this button to refresh the information listed below. View Click this button to view the detailed settings for certificate request. After c[...]

Vigor2710 Series User’s Guide 151 4 4 . . 1 1 0 0 . . 2 2 T T r r u u s s t t e e d d C C A A C C e e r r t t i i f f i i c c a a t t e e Trusted CA certificate lists three sets of trusted CA certificate. To import a pre-saved trusted CA certificate, please click IMPORT to open the following window. Use Browse… to find out the saved text file. [...]

Vigor2710 Series User’s Guide 152 4 4 . . 1 1 0 0 . . 3 3 C C e e r r t t i i f f i i c c a a t t e e B B a a c c k k u u p p Local certificate and Trusted CA certificate for this router can be saved within one file. Please click Backup on the following screen to save them . If you want to set encryption password for these certificates, please ty[...]

Vigor2710 Series User’s Guide 153 First, the Vigor V models of yours will have to register to a SIP Registrar by sending registration messages to validate. Then, bo th parties’ SIP proxies will forward the sequence of messages to caller to establish the session . If you both register to the same SIP Registrar, then it will be illustrated as bel[...]

Vigor2710 Series User’s Guide 154 4 4 . . 1 1 1 1 . . 1 1 D D i i a a l l P P l l a a n n This page allows you to set phone book and digit map for the VoIP function. Click the Phone Book and Digit Map links on the page to access into next pages for dialplan settings. P P h h o o n n e e B B o o o o k k In this section, you can set your VoIP conta[...]

Vigor2710 Series User’s Guide 155 Enable Click this to enable this entry. Phone Number The speed-dial number of this index. This can be any number you choose, using digits 0- 9 and * . Display Name The Caller-ID that you want to be displayed on your friend’s screen. This let your friend can easily know who’s calling without memorizing lots of[...]

Vigor2710 Series User’s Guide 156 D D i i g g i i t t M M a a p p For the convenience of user, this page allows users to edit prefix number for the SIP account with adding number, stripping number or replacing number. It is used to help user having a quick and easy way to dial out through VoIP interface. Enable Check this box to invoke this setti[...]

Vigor2710 Series User’s Guide 157 specific VoIP interface. Take the above picture (Prefix Table Setup web page) as an example, the prefix number of 03 will be replaced by 8863. For example: dial number of “031111111” will be changed to “88631111111” and sent to SIP server. OP Number The front number you type here is the first part of the [...]

Vigor2710 Series User’s Guide 158 Enable Click this to enable this entry. Call Direction Determine the direction for the phone call, IN – incoming call, OUT-outgoing call, IN & OUT – both incoming and outgoing calls. Barring Type Determine the type of the VoIP phone call, URI/URL or number. Specific URI/URL or Specific Number This field w[...]

Vigor2710 Series User’s Guide 159 For Block Unknown Domain – this function can block incomi ng calls (through Phone port) from unrecognized domain that is not specified in SIP accounts. Such control also can be done based on preconfigured schedules. For Block IP Address – this function can block incoming calls (through Phone port) com ing fro[...]

Vigor2710 Series User’s Guide 160 Last Call Return [Miss] Sometimes, people might miss some phone calls. Please dial number typed in this field to know where the last phone call comes from and call back to that one. Last Call Return [In] You have finished an incoming phone call, however you want to call back again for some reason. Please dial num[...]

Vigor2710 Series User’s Guide 161 Call Waiting [Act] Dial the number typed in this field to make all the incoming calls waiting for your answer. Call Waiting [Deact] Dial the number typed in this field to release this function. Block Anonymous[Act] Dial the number typed in t his field to block all the incoming calls with unknown ID. Block Anonymo[...]

Vigor2710 Series User’s Guide 162 4 4 . . 1 1 1 1 . . 2 2 S S I I P P A A c c c c o o u u n n t t s s In this section, you set up your own SIP setti ngs. When you apply for an account, your SIP service provider will give you an Account Name or user name, SIP Registrar, Proxy, and Domain name . (The last three might be the same in some case). Then[...]

Vigor2710 Series User’s Guide 163 Profile Name Assign a name for this profile for identifying. You can t ype similar name with the domain. For example, if the domain name is draytel.org , then you m ight set draytel-1 in this field. Register via If you want to make VoIP call without register personal information, please choose None and check the [...]

Vigor2710 Series User’s Guide 164 Expiry Time The time duration that your SIP Registrar server keeps your registration record. Before the time expires, the router will send another register request to SIP Registrar again. NAT Traversal Support If the router (e.g. , broadband router) you use connects to internet by other device, you have to set th[...]

Vigor2710 Series User’s Guide 165 4 4 . . 1 1 1 1 . . 3 3 P P h h o o n n e e S S e e t t t t i i n n g g s s This page allows user to set phone settings fo r Phone 1 and Phone 2 respectively. However, it changes slightly according to different model you have. Phone List Port – there are two phone ports provided here for you to configure. Phone[...]

Vigor2710 Series User’s Guide 166 drop down list to choose any one of them. D D e e t t a a i i l l e e d d S S e e t t t t i i n n g g s s f f o o r r P P h h o o n n e e P P o o r r t t Click the number link for Phone port, you can access into t he following page for configuring Phone settings. Hotline Check the box to enable it. Type in the SI[...]

Vigor2710 Series User’s Guide 167 means the incoming calls will be forwarded into SIP URL only when the local system is busy. No Answer means if the incoming calls do not receive any response, they will be forwarded to the SIP URL by the time out. SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or abc@iptel.org) as the site for call forwar[...]

Vigor2710 Series User’s Guide 168 Voice Active Detector - This function can detect if the voice on both sides is active or not. If not, the router will do something to save the bandwidth for other using. Click On to invoke this function; click off to close the function. Default SIP Account You can set SIP accounts (up to six groups) on SIP Accoun[...]

Vigor2710 Series User’s Guide 169 Region Select the proper region which you are located. The common settings of Caller ID Type , Dial tone , Ringing tone , Busy tone and Congestion tone will be shown automatically on the page. If you cannot find out a suitable one, please choose User Defined and fill out the corresponding values for dial tone, ri[...]

Vigor2710 Series User’s Guide 170 MISC Dial Tone Power Leve l - This setting is used to adjust the loudness of the dial tone. The smaller the number is, the louder the dial tone is. It is recommended for you to use the default setting. Ring Frequency - This setting is used to drive the frequency of the ring tone. It is recommended for you to use [...]

Vigor2710 Series User’s Guide 171 Refresh Seconds Specify the interval of refresh time to obtain the latest VoIP calling information. The information will update immediately when the Refresh button is clicked. Port It shows current connection status for the port of Phone1 and Phone2. Status It shows the VoIP connection status. IDLE - Indicates th[...]

Vigor2710 Series User’s Guide 172 mobility so WLAN users can simultaneously access all LAN facil ities just like on a wired LAN as well as Internet access. The Vigor wireless routers are equipped with a wireless LAN interface compliant with the standard IEEE 802.11n protocol. To boost its performance further, the Vigor R outer is also loaded with[...]

Vigor2710 Series User’s Guide 173 Since WEP has been proved vulnerable, you may consider using WPA for the most secure connection. You should select the appropriate security mechanism accord ing to your needs. No matter which security suite you select, they all will enhance the over-the-air data protection and /or privacy on your wireless network[...]

Vigor2710 Series User’s Guide 174 4 4 . . 1 1 2 2 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p By clicking the General Settings , a new web page will appear so that you could configure the SSID and the wireless channel. Please refer to the following figure for more information. Enable Wireless LAN Check the box to enable wireless funct[...]

Vigor2710 Series User’s Guide 175 setup. The default setting of this filed is blank and the function will always work. Hide SSID Check it to prevent from wireless sniffing and make it harder for unauthorized clients or STAs to join your wireless LAN. Depending on the wireless utility, the user may only see the information except SSID or just cann[...]

Vigor2710 Series User’s Guide 176 same time. That is, the wireless client must support this feature and invoke the function, too. Note: Vigor N61 wireless adapter supports this function. Therefore, you can use and install it into your PC for matching with Packet-OVERDRIVE (refer to the following picture of Vigor N61 wireless utility window, choos[...]

Vigor2710 Series User’s Guide 177 4 4 . . 1 1 2 2 . . 3 3 S S e e c c u u r r i i t t y y This page allows you to set security with diffe rent modes for SSID 1, 2, 3 and 4 respectively. After configuring the correct settings, please click OK to save and invoke it. By clicking the Security Settings , a new web page will appear so that you could co[...]

Vigor2710 Series User’s Guide 178 Pre-Shared Key (PSK) - Either 8~63 ASCII characters, such as 012345678..(or 64 Hexadecimal digits leading b y 0x, such as "0x321253abcde..."). WEP 64-Bit - For 64 bits WEP key, either 5 ASCII characters, such as 12345 (or 10 hexadecim al digitals leading by 0x, such as 0x4142434445.) 128-Bit - For 128 b[...]

Vigor2710 Series User’s Guide 179 4 4 . . 1 1 2 2 . . 4 4 A A c c c c e e s s s s C C o o n n t t r r o o l l For additional security of wireless access, the Access Control facility allows you to restrict the network access right by controlling the wire less LAN MAC address of client. Only the valid MAC address that has been configured can access[...]

Vigor2710 Series User’s Guide 180 4 4 . . 1 1 2 2 . . 5 5 W W P P S S WPS (Wi-Fi Protected Setup) provides easy procedure to m ake network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2. Note: Such function is available for the wi reless station with WPS supported. It is the simple[...]

Vigor2710 Series User’s Guide 181 vigor router. For WPS is supported in WPA-PSK or WPA2- PSK mode, if you do not choose such mode in Wireless LAN>>Security , yo u will see the following message box. Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK mode and access WPS again. Below shows Wireless LAN>&[...]

Vigor2710 Series User’s Guide 182 Authentication Mode Display current authentication mode of the router. Only WPA2/PSK and WPA/PSK support WPS. Configure via Push Button Click Start PBC to invoke Push-Button style WPS setup procedure. The router will wait for WPS requests from wireless clients about two minutes. The WPS LED on the router will bli[...]

Vigor2710 Series User’s Guide 183 The application for the WDS-Repeater mode is depicted as below: The major difference between these two modes is that: while in Repeater mode, the packets received from one peer AP can be repeated to another peer AP through WDS links. Yet in Bridge mode, packets received from a WDS link will only be for warded to [...]

Vigor2710 Series User’s Guide 184 Mode Choose the mode for WDS setting. Disable mode will not invoke any WDS setting. Bridge mode is designed to fulfill the first type of application. Repeater mode is for the second one. Security There are three ty pes for security, Disable , WEP and Pre-shared key . The setting you choose here will make the foll[...]

Vigor2710 Series User’s Guide 185 Yet please disable the unused link to get better performance. If you want to invoke the peer MAC address, remember to check Enable box in the front of the MAC address after typing. Repeater If you choose Repeater as the connecting mode, please type in the peer MAC address in these fields. Four peer MAC addresses [...]

Vigor2710 Series User’s Guide 186 Statistics It displays the statistics for the channels used by APs. Add to If you want the found AP applying the WDS settings, please type in the AP’s MAC address on the bottom of the page and click Bridge or Repeater. Next, click Add to . Later, the MAC address of the AP will be added to Bridge or Repeater fie[...]

Vigor2710 Series User’s Guide 187 4 4 . . 1 1 3 3 S S y y s s t t e e m m M M a a i i n n t t e e n n a a n n c c e e For the system setup, there are several items that you have to know the way of configuration: Status, Administrator Password, Configuration Backup, Syslog, Time setup, Reboot System, Firmware Upgrade. Below shows the menu items fo[...]

Vigor2710 Series User’s Guide 188 DHCP Server Display the current status of DHCP server of the LAN interface. DNS Display the assigned IP address of the primary DNS. WAN------- Link Status Display current connection status. MAC Address Display the MAC address of the WAN Interface. Connection Display the connection type. IP Address Display the IP [...]

Vigor2710 Series User’s Guide 189 4 4 . . 1 1 3 3 . . 2 2 T T R R - - 0 0 6 6 9 9 This device supports TR-069 standard. It is very convenient for an administrator to m anage a TR-069 device through an Auto Configuration Server, e.g., VigorACS. ACS Server On Choose the interface for the router connecting to ACS server. ACS Server URL/Username/Pass[...]

Vigor2710 Series User’s Guide 190 4 4 . . 1 1 3 3 . . 3 3 A A d d m m i i n n i i s s t t r r a a t t o o r r P P a a s s s s w w o o r r d d This page allows you to set new password. Old Password Type in the old password. The factory default setting for password is “admin” . New Password Type in new password in this filed. Confirm Password T[...]

Vigor2710 Series User’s Guide 191 3. In Save As dialog, the default filename is config.cfg . You could gi ve it another name by yourself. 4. Click Save button, the configuration will download a utomatically to your computer as a file named config.cfg . The above example is using W indows platform for demonstrating exam ples. The Mac or Linux plat[...]

Vigor2710 Series User’s Guide 192 R R e e s s t t o o r r e e C C o o n n f f i i g g u u r r a a t t i i o o n n 1. Go to System Maintenance >> Configuration Backup . The following windows will be popped-up, as shown below. 2. Click Browse button to choose the correc t confi guration file for uploading to the router. 3. Click Restore butto[...]

Vigor2710 Series User’s Guide 193 Send a test e-mail Make a simple test for the e-mail address specified in this page. Please assign the mail address first and click this button to execute a test for verify the mail address is available or not. SMTP Server The IP address of the SMTP server. Mail To Assign a mail address for sending mails out. Ret[...]

Vigor2710 Series User’s Guide 194 4 4 . . 1 1 3 3 . . 6 6 T T i i m m e e a a n n d d D D a a t t e e It allows you to specify where the time of the router should be inquired from. Current System Time Click Inquire Time to get the current time. Use Browser Time Select this option to use the browser time from the remote administrator PC host as ro[...]

Vigor2710 Series User’s Guide 195 4 4 . . 1 1 3 3 . . 7 7 M M a a n n a a g g e e m m e e n n t t This page allows you to manage the setti ngs for access control, access list, port setup, and SNMP setup. Allow management from the Internet Enable the checkbox to allow system administrators to login from the Internet. There are several servers prov[...]

Vigor2710 Series User’s Guide 196 Manager Host IP Set one host as the manager to execute SNMP function. Please type in IP address to specify certain host. Trap Community Set trap community by typing a pr oper name. The default setting is public. Notification Host IP Set the IP address of the host that will receive the trap community. Trap Timeout[...]

Vigor2710 Series User’s Guide 197 4 4 . . 1 1 3 3 . . 9 9 F F i i r r m m w w a a r r e e U U p p g g r r a a d d e e Before upgrading your router firmware, you need to i nstall the Router Tools. The Firmware Upgrade Utility is included in the tools. The following web page will guide you to upgrade firmware by using an exam ple. Note that this ex[...]

Vigor2710 Series User’s Guide 198 4 4 . . 1 1 4 4 D D i i a a g g n n o o s s t t i i c c s s Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router. Below shows the menu items for Diagnostics. 4 4 . . 1 1 4 4 . . 1 1 D D i i a a l l - - o o u u t t T T r r i i g g g g e e r r Click Diagnostics and click Dial-ou[...]

Vigor2710 Series User’s Guide 199 4 4 . . 1 1 4 4 . . 2 2 R R o o u u t t i i n n g g T T a a b b l l e e Click Diagnostics and click Routing Table to open t he web page. Refresh Click it to reload the page. 4 4 . . 1 1 4 4 . . 3 3 A A R R P P C C a a c c h h e e T T a a b b l l e e Click Diagnostics and click ARP Cache Table to view the content [...]

Vigor2710 Series User’s Guide 200 4 4 . . 1 1 4 4 . . 4 4 D D H H C C P P T T a a b b l l e e The facility provides information on IP address as signments. This information is helpful in diagnosing network problems, such as IP address conflicts, etc. Click Diagnostics and click DHCP Table to open the web page. Index It displays the connection ite[...]

Vigor2710 Series User’s Guide 201 4 4 . . 1 1 4 4 . . 5 5 N N A A T T S S e e s s s s i i o o n n s s T T a a b b l l e e Click Diagnostics and click NAT Sessions Table to open the list page. Private IP:Port It indicates the source IP address and port of local PC. #Pseudo Port It indicates the temporary port of the router used for NAT. Peer IP:Po[...]

Vigor2710 Series User’s Guide 202 4 4 . . 1 1 4 4 . . 6 6 D D a a t t a a F F l l o o w w M M o o n n i i t t o o r r This page displays the running procedure for the IP address monitored and refreshes the data in an interval of several seconds. The IP address listed here is configured in Bandwidth Management. You have to enable IP bandwidth limi[...]

Vigor2710 Series User’s Guide 203 Unblock – the device with the IP address will be blocked in five minutes. The remaining time will be shown on the session column. 4 4 . . 1 1 4 4 . . 7 7 T T r r a a f f f f i i c c G G r r a a p p h h Click Diagnostics and click Traffic Graph to pen the web page. Choose WAN1 Bandwidth, Sessions, daily or weekl[...]

Vigor2710 Series User’s Guide 204 4 4 . . 1 1 4 4 . . 8 8 P P i i n n g g D D i i a a g g n n o o s s i i s s Click Diagnostics and click Ping Diagnosis to pen the web page. Ping to Use the drop down list to choose the destination that y ou want to ping. IP Address Type in the IP address of the Host/IP that you want to ping. Run Click this button[...]

Vigor2710 Series User’s Guide 205 4 4 . . 1 1 4 4 . . 9 9 T T r r a a c c e e R R o o u u t t e e Click Diagnostics and click Trace Route to open the web page. This page allows you to trace the routes from router to the host. Simply type the IP address of the host in the box and click Run . The result of route trace will be shown on the screen. P[...]

Vigor2710 Series User’s Guide 206 This page is left blank.[...]

Vigor2710 Series User’s Guide 207 5 A A p p p p l l i i c c a a t t i i o o n n a a n n d d E E x x a a m m p p l l e e s s 5 5 . . 1 1 R R e e q q u u e e s s t t a a c c e e r r t t i i f f i i c c a a t t e e f f r r o o m m a a C C A A s s e e r r v v e e r r o o n n W W i i n n d d o o w w s s C C A A S S e e r r v v e e r r 1. Go to Certifi[...]

Vigor2710 Series User’s Guide 208 2. You can click GENERATE button to start to edit a certificate request. Enter the information in the certificate request. 3. Copy and save the X509 Local Certificate Requet as a text file and save it for later use. 4. Connect to CA server via web browser. Follo w the i nstruction to submit the request. Below we [...]

Vigor2710 Series User’s Guide 209 Select Advanced request . Select Submit a certificate request a base64 encoded PKCS #10 file or a renewal request using a base64 encoded PKCS #7 file Import the X509 Local Certificate Requet text file. Select Router (Offline request) or IPSec (Offline request) below. Then you have done the request and the ser ver[...]

Vigor2710 Series User’s Guide 210 and you will find the below window show ing “------BEGINE CERTIFICATE------.....” 6. You may review the detail informati on of the certificate by clicking View button.[...]

Vigor2710 Series User’s Guide 211 5 5 . . 2 2 R R e e q q u u e e s s t t a a C C A A C C e e r r t t i i f f i i c c a a t t e e a a n n d d S S e e t t a a s s T T r r u u s s t t e e d d o o n n W W i i n n d d o o w w s s C C A A S S e e r r v v e e r r 1. Use web browser connecting to the CA server that you would like to retrieve its CA cert[...]

Vigor2710 Series User’s Guide 212 2. In Choose file to download , click CA Certificate Current and Base 64 encoded, and Download CA certificate to save the .cer. file. 3. Back to Vigor router, go to Trusted CA Certificate . Click IMPORT button and browse the file to import the certificate (.cer file) into Vigor router. When finished, click refres[...]

Vigor2710 Series User’s Guide 213 5 5 . . 3 3 C C a a l l l l i i n n g g S S c c e e n n a a r r i i o o f f o o r r V V o o I I P P f f u u n n c c t t i i o o n n 5 5 . . 3 3 . . 1 1 C C a a l l l l i i n n g g v v i i a a S S I I P P S S e e v v e e r r Example 1: Both John and David have SIP Addresses from different servi ce providers. John?[...]

Vigor2710 Series User’s Guide 214 Example 2: Both John and David have SIP Addresses from the same servi ce provider. John’s SIP URL: 1234@draytel.org , David ’s SIP URL: 4321@draytel.org Settings for John DialPlan index 1 Phone Number: 1111 Display Name: David SIP URL: 4321@draytel.org SIP Accounts Settings --- Profile Name: draytel 1 Registe[...]

Vigor2710 Series User’s Guide 215 5 5 . . 3 3 . . 2 2 P P e e e e r r - - t t o o - - P P e e e e r r C C a a l l l l i i n n g g Example 3: Arnor and Paulin have Vigor routers respectively. The y can call each other without SIP Registrar. First they must have each other’s IP address and assign an Account Name for the port used for calling. Arn[...]

Vigor2710 Series User’s Guide 216 5 5 . . 4 4 U U p p g g r r a a d d e e F F i i r r m m w w a a r r e e f f o o r r Y Y o o u u r r R R o o u u t t e e r r Before upgrading your router firmware, you need to i nstall the Router Tools. The Firmware Upgrade Utility is included in the tools. 1. Insert CD of the router to your CD ROM. 2. From the we[...]

Vigor2710 Series User’s Guide 217 9. Double click on the icon of router tool. The setup wizard will appear. 10. Follow the onscreen instructions to install the tool. Finally , click Finish to end the installation. 11. From the Start menu, open Programs and choose Router Tools XXX >> Firmware Upgrade Utility . 12. Type in your router IP, usu[...]

Vigor2710 Series User’s Guide 218 14. Click Send . 15. Now the firmware update is finished.[...]

Vigor2710 Series User’s Guide 219 T T r r o o u u b b l l e e S S h h o o o o t t i i n n g g This section will guide you to solve abnormal s ituations if you cannot access into the Internet after installing the router and finishing the web configuration. Please follow sections below to check your basic installation status stage by stage. z Check[...]

Vigor2710 Series User’s Guide 220 6 6 . . 2 2 C C h h e e c c k k i i n n g g t t h h e e N N e e t t w w o o r r k k C C o o n n n n e e c c t t i i o o n n S S e e t t t t i i n n g g s s o o n n Y Y o o u u r r C C o o m m p p u u t t e e r r Sometimes the link failure occurs due to the wrong network connection settings. After trying the above[...]

Vigor2710 Series User’s Guide 221 4. Select Obtain an IP address automatically and Obtain DNS server address automatically . F F o o r r M M a a c c O O s s 1. Double click on the current used MacOs on the desktop. 2. Open the Application folder and get into Network . 3. On the Network screen, select Using DHCP from the drop down list of Configur[...]

Vigor2710 Series User’s Guide 222 6 6 . . 3 3 P P i i n n g g i i n n g g t t h h e e R R o o u u t t e e r r f f r r o o m m Y Y o o u u r r C C o o m m p p u u t t e e r r The default gateway IP address of the router is 192.168.1.1. For so me reason, you might need to use “ping” command to check the link status of the router. The most impor[...]

Vigor2710 Series User’s Guide 223 6 6 . . 4 4 C C h h e e c c k k O O n n l l i i n n e e S S t t a a t t u u s s P P a a g g e e Go to online status page and check if WAN st atus shows connected and is in green, if not please check the Internet connection configur ation guide in section 2.4 to check the configuration for Internet connectivity. 6[...]

Vigor2710 Series User’s Guide 224 H H a a r r d d w w a a r r e e R R e e s s e e t t While the router is running (ACT LED blinking), press the Factory Reset button and hold for more than 5 seconds. When you see the ACT LED blinks rapidly , please release the button. Then, the router will restar t with the default configuration. After restore the[...]