Eclipse - Fujitsu Ten CD8454 Bedienungsanleitung

OWNER'S MANUAL We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference. ESN E8 High-Power "Customize" CD/MS Receiver with MP3/WMA/ATRAC3 Decoder and NOB Remote MODEL CD8454 DISC BAND MODE MUTE ILLUMI[...]

For y our safety in using the CD8454 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD8454. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage. Before reading through the manual, take time to read through and learn the[...]

3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. • To prevent accidents, store batteries for the remote control out of the reach of small children. In case a child swallows [...]

4 • To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result. • When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems. Otherwise, an acc[...]

5 • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident. • Keep foreign objects out of the disc slot. They may cause fire or electrical shock. Another possibility is that discs may be damaged or become stuck. • Be careful no[...]

6 • Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting, resulting in smoke or fire. • Do not install this product in locations where it cannot be fastened securely, such as places subject to [...]

7 T able of Contents Operating precautions ..............................................12 Notes on operation .......................................................................12 About compact discs ....................................................................13 About cleaning a CD ......................................................[...]

8 Enabling the loudness control ......................................................46 Making changes with Display Adjustment Mode ..........................47 Switching the display pattern .................................................48 Switching the motion picture ..................................................49 Switching the brightness[...]

9 Display order of MP3/WMA file/folder names ........................72 Listening to MP3/WMA file ...........................................................73 Advancing to the next track (file) or returning to the beginning of the track (file) being played ..........................................................74 Skipping to the next or previou[...]

10 Time Alignment ....................................................................102 Crossover.............................................................................103 Multi-harmonizer ..................................................................105 Non-fader phase ..................................................................1[...]

11 Muting the volume................................................................146 Switching playback modes .........................................................147 How to play the tuner .................................................................147 Selecting the FM/AM band...................................................147 Select[...]

12 Operating precautions <Your CD8454 will perform well over a long period of time through correct handling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard. • We recommend using with this player a disc with the logo shown to the left. • You can play music CDs(CD-R/CD-RW) on this player. Be [...]

13 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback. Observe the following precautions to ensure high quality sound performance: • Do not leave an eject[...]

14 Operating precautions About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “improving sound performance” or “protecting CDs.” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player. About brand new CDs • You may notice t[...]

15 Operating precautions About borrowed CDs • Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get stuck inside or damage the deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot. Pressing downward in the process may scratch the recorded surface of the disc. OKA [...]

16 Operating precautions • Do not store Memory Sticks in places that are subject to static electricity and electrical interference, otherwise the data they contain may become corrupted. • In order to protect the player, the player's functions will be stopped automatically if a problem occurs. If the player cannot be operated even after fol[...]

17 Operating precautions • Do not use Memory Sticks with labels that are peeling off or that have name tags (labels) attached. • Store Memory Sticks in places away from direct sunlight and high humidity, otherwise the Memory Sticks may become unusable. • Place Memory Sticks in their protective cases during transportation and storage. • Do n[...]

18 Operating precautions About cleaning the Memory Stic ks • In order to maintain good audio performance from Memory Sticks, periodically wipe the cartridge clean of any dust and other contamination with a dry cloth.[...]

19 Names of controls and parts Never place an object or rest your hands or the like on the front panel. Caution Names of contr ols and par ts Switches disc modes and switches to AUX mode. Activates and deactivates mute. Opens/closes front panel. Selects radio preset channels and performs disc mode functions. Turns the sound adjustment mode ON/OFF. [...]

20 ESN security operating procedure About ESN ESN security operating pr ocedure This deck is equipped with ESN (ECLIPSE Security Network). A pre- registered music CD (Key CD), four-digit security code, or a Memory Stick on which a all unit functions will not operate, even by turning the ignition switch to the ACC or ON position or reconnecting the [...]

21 ESN security operating procedure [FUNC] button Button [3] How to s witch the security type (K ey CD security/Memory Stick security) You can switch the type of security being used (Key CD security or Memory Stick security). The initial setting is for Key CD security to be used. Check that the Power is OFF. 1 Press and hold button [3], then the [F[...]

22 ESN security operating procedure How to operate the ESN (K ey CD) security [FUNC] button Button [6] Check that the Power is OFF. Press and hold button [6], then the [FUNC] button, and hold both for more than one second. A [SEC] message appears, in two seconds it will change to [DISC]. 2 1 Press the [OPEN] button. The front panel opens; The CD845[...]

23 ESN security operating procedure Press the [OPEN] button. The front panel closes. 5 Check that the Power is OFF. Press and hold button [6], then the [FUNC] button, and hold both for more than one second. A [SEC] message appears, then in two seconds it will change to [DISC]. Press the [OPEN] button. The front panel opens; The CD8454 is now ready [...]

24 ESN security operating procedure First, cancel the existing Key CD. Refer to "How to cancel the key CD". Next, program a new Key CD. Refer to "How to program the Key CD". 2 1 How to c hang e the Ke y CD If power is disconnected while ESN security is active (a Key CD was programmed), operation is disabled unit power is restore[...]

25 ESN security operating procedure  Note  If after 5 tries the correct Key CD is not inserted, the display reads [CALL800]; the unit must be returned to Eclipse to be reset. In this case, please contact your Eclipse dealer for assistance. For country-specific customer service information, refer to "How to contact customer service" [...]

26 ESN security operating procedure [FUNC] button Buttons [1] to [4] How to operate the ESN (Memory Stic k) security Check that the Power is OFF. Press and hold button [1], then the [FUNC] button, and hold both for more than one second. A [SEC] message appears, in two seconds it will change to [MS]. 2 1 How to recor d a security code ATTENTION •I[...]

27 ESN security operating procedure Press the [FUNC] button for more than one second. The security code is registered in the deck and security is set. The registered security code is encrypted and then written to Memory Stick. 5 ATTENTION When the security code is registered using a Memory Stick that contains several kinds of data, such as music, e[...]

28 ESN security operating procedure [FUNC] button Buttons [1] to [4] The security function can be canceled when the security code that has been recorded with the deck is entered and verified. Canceling the security function can be done by entering the security code into the deck, or by using the Memory Stick. Canceling the security function by ente[...]

29 ESN security operating procedure [FUNC] button Button [1] [DISC] button Canceling the security function using a Memory Stick Check that the Power is OFF. Press and hold button [1], then the [FUNC] button, and hold both for more than one second. A [SEC] message appears, then in two seconds it will change the [- - - -] (Security code input display[...]

You can change the Memory Stick and security code that have been recorded by the deck to a different Memory Stick and security code. Cancel the security code that has been recorded with the deck. Refer to "How to cancel the Memory Stick security" on page 28. Re-record the new Memory Stick and security code that you would like to use. Refe[...]

31 ESN security operating procedure [FUNC] button Buttons [1] to [4] If power is disconnected while ESN security is active (a security code was recorded), operation is disabled unit power is restored and the unit unlocked. Follow this procedure to resume normal operation. ESN security lock can be canceled by directly entering the security code into[...]

32 ESN security operating procedure Press the [FUNC] button for more than one second. If the security code matches the code recorded by the deck, [OK] will appear on the display and the security function will be canceled. 3 ATTENTION •If the security code does not match the information recorded by the deck, [ERR_] (ERR and the error number) will [...]

33 ESN security operating procedure Insert the Memory Stick that has been recorded, and then close the front panel. The recorded data will be read from the Memory Stick. If the contents recorded in the Memory Stick match the information recorded by the deck, [OK] will appear on the display for two seconds, and then the deck will return to normal op[...]

34 ESN security operating procedure  Note  For country-specific customer service information, refer to "How to contact customer service" on page 174. Your security code and Memory Stick can be easily forgotten. Write the security code and Memory Stick title in a reminder note (See page 179). After the 5th incorrect attempt, the disp[...]

35 ESN security operating procedure [FUNC] button Button [5] How to operate the A CC security ACC security involves using Memory Stick security to record a security code, and then when the ignition switch is turned to OFF and back to ACC, the operation of all buttons is disabled. Check that the Power is OFF. 1 Once a security code has been recorded[...]

36 ESN security operating procedure [FUNC] button Button [2] How to turn the security indicator on/off Once ESN security is activated, the indicator flashes whenever the vehicle's ignition switch is turned off, warning potential thieves that the unit is protected. However, if do not want this visible deterrent, it may be turned off. With the p[...]

37 ESN security operating procedure [FUNC] button Button [4] How to read the Electr onic Serial Number Check that the Power is OFF. 1 Press and hold button [4], then the [FUNC] button, and hold both for more than one second. 2 [ESN] appears on the display, followed by an eight-digit number; this number is your electronic serial number (ESN). You ma[...]

38 Basic operation Turning the power on and off. When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. When the vehicle has no ACC position on the ignition switch, care is needed when turning off the deck. Follow Step 2 or Step 3 when turning off the power. T urning the power on and off [...]

39 Basic operation Listening to a CD Press the [OPEN] button. 1 The front panel opens. Insert a CD into the disc slot, label side up. 2 The CD will immediately start playing. When press the button [1], CD is ejected. ATTENTION •A CD cannot be ejected when the front panel is closed, even after pressing button [1]. •When a CD is already loaded, p[...]

40 Basic operation [OPEN] button [DISC] button Listening to MG Memory Stick Press the [OPEN] button. 1 The front panel opens. Insert a MG Memory Stick into the Memory Stick slot. 2 Warning Do not press the [OPEN] button while the MG Memory Stick is being inserted. This could cause an injury and damage to the front panel. Press the [OPEN] button. 3 [...]

41 Basic operation Listening to the tuner Press the [FM AM] button. 1 This will turn the tuner on. Press the [FM AM] button to switch to the desired FM or AM bands. 2 For example, radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM1 with each press of the button. (Depends on memory function setting, described on page 94.) Turn the [SEL] button [...]

42 Basic operation Warning Adjusting audio v olume Turn the [AUDIO CONTROL] button to the left or right. 1 Turn to the right: Increases the volume. Turn to the left: Decreases the volume. ATTENTION Press the [E-COM] button for more than one second if E-COM is connected and less than one second if E-COM is not connected to cut the volume or restore [...]

43 Basic operation Various audio control modes may be fine-tuned using this procedure. Modes will switch in the order shown below each time the button is pressed. Switching audio contr ol modes Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted. 1 * 1: When the sound adjustment mode is in normal mode, this a[...]

44 Basic operation Adjusts treble level. Treble mode can be adjusted for each source (CDP/CDC, FM and AM). Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes high sounds. Turn to the left: Softens high sounds. TREB (TREBLE) Mode Adjusts left/right speaker balance. Turn the [AUDIO CONTROL] button to the left or right[...]

45 Basic operation FM AM CD Memory Stick [AUDIO CONTROL] button You can set different volume levels for each audio mode. The volume for the initial FM mode (default value: 40) is used as a reference for storing the differences in volume that have been set for each audio mode. When SVC is set, the volume level can change as shown in the example sett[...]

46 Basic operation ATTENTION To disable the loudness feature, repeat the above procedure to display the [LOUD OFF] indication. The loudness control may be turned on to emphasize low and high frequencies at low volume levels. Loudness compensates for the apparent weakness of low and high frequencies at low volume by boosting the bass and treble leve[...]

47 Basic operation This mode lets you adjust the display brightness, change the button illumination color and turn the display on and off. Enters display adjustment mode. Making changes with Displa y Adjustment Mode Press the [DISP] button for less than one second. 1 When the button is turned, the setting item changes in the following order and the[...]

48 Basic operation [SEL] button You can change the details that are shown in display type in the following way. Turn the [SEL] button to select the Disp type. The selected item will be highlighted. Press the [SEL] button. The mode will change to display pattern setting mode. Turn the [SEL] button to select the display pattern. The patterns switch b[...]

49 Basic operation Press the [RTN] button. At this time, other adjustments can also be made in display adjustment mode. Press the [DISP] or [RTN] button to exit display adjustment mode. 5 4 [SEL] button [RTN] button [DISP] button You can select a moving picture screen that is already available in the deck and show it on the display. The deck has th[...]

50 Basic operation You can change the button illumination color in the following way. Turn the [SEL] button to select ILL. The selected item will be highlighted. Press the [SEL] button. The screen for changing the illumination color will appear. Turn the [SEL] button to select Green or Red. The selected item will be highlighted. Press the [RTN] but[...]

51 Basic operation You can turn the display on and off in the following way. Turn the [SEL] button to select DISP ON/OFF. The selected item will be highlighted. Press the [SEL] button. The screen for turning the screen display on and off will appear. Turn the [SEL] button to select ON or OFF. The selected item will be highlighted. Press the [RTN] b[...]

52 Basic operation A variety of settings can be changed. The function mode is activated. When the button is turned, the setting item changes in the following order and the selected item is highlighted. Making changes with Function Mode Press the [FUNC] button for less than one second. 1 * 1: Cannot make settings other than for CD or CD changer oper[...]

53 Basic operation The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure: Turn the [SEL] button to select Guide Tone. The selected item will be highlighted. Press the [SEL] button. The guide tone mode will be switched ON/OFF. Turn the [SEL] button to[...]

54 Basic operation Switches the clock display to ON/OFF. Turn the [SEL] button to select Clock. The selected item will be highlighted. Press the [SEL] button. The clock display ON/OFF mode is activated. Turn the [SEL] button to select ON or OFF. The selected item will be highlighted. Press the [RTN] button. At this time, other adjustments can also [...]

55 Basic operation This receiver uses the 12-hour display notation. Turn the [SEL] button to select Clock Adjust. The selected item will be highlighted. Press the [SEL] button. The clock adjustment mode is activated. Turn the [SEL] button to display the item to be selected for adjustment. Hours, minutes or exact hour will be switched each time the [...]

56 Basic operation [FUNC] button [SEL] button [RTN] button You can set the demonstration screen display to appear or not appear when the power is turned on. Turn the [SEL] button to select the Demo. The selected item will be highlighted. Press the [SEL] button. The Demo ON/OFF mode is activated. Turn the [SEL] button to select ON or OFF. The select[...]

57 Basic operation Others Enabling E-COM feature Press the [E-COM] button for one second. Pressing the button will switch the E-COM feature on or off. 1 [E-COM] button [FUNC] button Operation assist function In display adjustment mode, function mode and sound adjustment mode, the screen displays and button illumination help to guide you in carrying[...]

58 Basic operation If memos have been set, a memo recorded corresponding to a number button [1] to [5] appears on the screen when the number button is pressed briefly while the power of the main unit is turned off. Displaying a memo Press and hold any number button for more than two seconds while in the Standby mode. The state shifts to the MEMO se[...]

59 Basic operation Press the number button corresponding to the memo to be deleted for more than two seconds while the power is turned off. Press the [6] button for more than two seconds. The memo will be deleted. 2 1 Deleting a memo Press the [RTN] button. Memo settings are now completed. 5 ATTENTION • To change the type of character to be enter[...]

60 How to operate the CD player Listening to CDs Press the [DISC] button to switch to the CD player mode. 1 First press the [DISC] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. This starts CD play. Disc mode will switch from CD player ➔ Memory Stick player in order each time the button is p[...]

61 How to operate the CD player Adv ancing to the next trac k or returning to the beginning of the trac k being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track. Turn to the left: Returns to the beginning of the track being played. (Repeat turning for previous tracks.) Pla ying the beginning of trac[...]

62 How to operate the CD player Repeating the same trac k (REPEA T) Press button [5] to repeat the track being played. 1 To cancel, press button [5] again. Pla ying tracks in random or der (RANDOM) Press button [6] to play the tracks in random order. 1 To cancel, press button [6] again. ATTENTION • During random playback, press button [5] to repe[...]

63 How to operate the CD player Ejecting the disc Press the [OPEN] button for less than one second. 1 The front panel opens. Switching a CD to pause / pla y Press button [3] for less than one second. 1 It pauses playing a CD. To cancel, press button [3] again. Press the button [1]. 2 Disc is ejected. • Do not drive with the front panel open. The [...]

64 How to operate the CD player Creating a title f or a CD Press the [FUNC] button for less than one second while in the disc mode. 1 Press the [SEEK ] button to select the character type. 4 Pressing the button will switch types from [ABC] (Upper-case alphabet characters) to, [123] (numeric characters) and then [!&?] (symbols). Press either [SE[...]

65 How to operate the CD player Turn the [SEL] button to the left or right to select characters. 6 Turn to the right: Advances the character forward in its type. Turn to the left: Moves the character backward in its type. [Symbol] Initial value [!] [Right direction] ! ¡ " ¡ # ¡ $ ¡ % ¡ & ¡ ’ ¡ ( ¡ ) ¡ * ¡ + ¡ , ¡ – ¡ . ¡ [...]

66 How to operate the CD player Changing a previousl y set title Press the [FUNC] button for less than one second while in the disc mode. 1 Press either [SEL] or [FAST ] button to move the cursor to the position in the title for inserting or changing characters. 4 [SEL] button: Moves the cursor to the right. [FAST ] button: Advances the cursor to t[...]

67 How to operate the CD player Deleting a previousl y created title Press the [FUNC] button for less than one second while in the disc mode. 1 Hold the [6] button down for more than two seconds. 4 The title has now been deleted. If external CD changers are connected, a previously created title for a CD will be deleted in the same way. It is assume[...]

68 How to operate the CD player Changing the number of CD titles Press the [FUNC] button for less than one second while in the disc mode. 1 Turn the [SEL] button to select Memory Func. 2 Press the [SEL] button. 3 Turn the [SEL] button to select an address from A to E. 4 The selected item will be highlighted. The mode will change to memory allocatio[...]

69 How to operate the CD player Displa ying CD text Press the [DISP] button for more than one second. 1 Pressing the [DISP] button while text is displayed scrolls the display in the order DISC title ➔ TRACK title, and then the display stops with the TRACK title. At this time, the display mode also switches between A type and B type. (Refer to the[...]

70 How to operate the MP3/WMA player About MP3/WMA MP3 (MPEG Audio Layer III) is a standard format for audio compression technology. By using MP3 a file can be compressed to one-tenth the size of the original. WMA (Windows Media TM Audio) is format for audio compression technology. WMA files can be compressed to a size smaller than MP3 files. This [...]

Media capable of playing MP3/WMA includes CD-R and CD-RW discs. Compared to CD-ROM media commonly used for music discs, CD-R and CD-RW discs are fragile in high temperature/high humidity environments and one section of the CD-R and CD-RW may become incapable of playback. Fingerprints or scratches on the disc may prevent playback or cause skipping d[...]

72 How to operate the MP3/WMA player Only files with the MP3/WMA file extension ".mp3", ".wma" can be recognized as MP3/WMA and played. Be sure to save MP3 files with the ".mp3" file extension. Be sure to WMA files with the ".wma" file extension. The "MP" or "WMA" letters of the file exten[...]

73 How to operate the MP3/WMA player Listening to MP3/WMA file Press the [DISC] button to switch to the CD player mode. 1 This starts MP3/WMA file play. Disc mode from CD player ➔ Memory Stick player in order each time the button is pressed. If an external CD changer is connected, each additional press of the [DISC] button will switch modes from [...]

74 How to operate the MP3/WMA player Adv ancing to the next trac k (file) or returning to the beginning of the trac k (file) being playe d Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track (file). Turn to the left: Returns to the beginning of the track (file) being played. Repeat turning for previous tracks[...]

75 How to operate the MP3/WMA player Press the button briefly to play just the first 10 seconds of each song for all the files in the same layer of the folder being played. Pressing the button until [FOLDER SCAN] is displayed will play just the first 10 seconds of the first song in each folder. Pla ying the beginning of files (SCAN) Press button [4[...]

76 How to operate the MP3/WMA player Press the button briefly to randomly play the files in the same layer as the folder being played. Pressing the button until [FOLDER RAND] is displayed will randomly play the files in all the folders. To cancel, press button [6] again. Pla ying files in random order (RANDOM) Press button [6]. 1 ATTENTION • Duri[...]

77 How to operate the MP3/WMA player Displa ying title [DISP] button Each time the button is pressed, the following will be displayed in order. Folder Name/File Name* ➔ Tag *: The display area shows a maximum of 10 characters and then scrolls to display the remaining characters. After the folder name is displayed, the file name will be displayed [...]

78 How to operate the Memory Stick player Music data recorded on "MG Memory Stick" with ATRAC3 (an audio compression technology) can be played on this deck. Recording from music CD to the MG Memory Stick is also possible. The following explanation for the operation is made assuming that the MG Memory Stick has already been inserted. First[...]

79 How to operate the Memory Stick player Adv ancing to the next trac k or returning to the beginning of the trac k being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track. Turn to the left: Returns to the beginning of the track being played. (Repeat turning for previous tracks.) Pla ying the beginni[...]

80 How to operate the Memory Stick player Repeating the same trac k (REPEA T) Press button [5] to repeat the track being played. 1 To cancel, press button [5] again. Pla ying tracks in random or der (RANDOM) Press button [6] to play the tracks in random order. 1 To cancel, press button [6] again. ATTENTION •During random playback, press button [5[...]

81 How to operate the Memory Stick player Ejecting the Memory Stick Press the [OPEN] button. 1 The front panel opens. Eject the Memory Stick. 2 Lightly press the Memory Stick one time. Press the [OPEN] button. 3 The front panel closes. Caution [OPEN] button ATTENTION Memory Stick will not eject by itself. Lightly press the Memory Stick to eject. ?[...]

82 How to operate the Memory Stick player [FUNC] button Recor ding on Memor y Stic k Insert the MG Memory Stick to be recording the track and music CD. 1 Press the [FUNC] button for more than one second. 2 Using ATRAC3 audio compression technology, this deck compresses the music data played on the built-in CD player and records the data on the MG M[...]

83 How to operate the Memory Stick player [FUNC] button [SEL] button [RTN] button Selecting trac ks to be recorded Press the [FUNC] button for less than one second. 1 Turn the [SEL] button to select Memory Stick. 2 The track to be recorded can be selected. Press the [SEL] button. 3 The Memory Stick setting mode is activated. The function mode is ac[...]

84 How to operate the Memory Stick player [FUNC] button [SEL] button [RTN] button Setting sound quality Press the [FUNC] button for less than one second. 1 Turn the [SEL] button to select Memory Stick. 2 The recording sound quality (the recording bit rate) can be set. The recording bit rate may be selected from 66k, 105k and 132k. Sound quality and[...]

85 How to operate the Memory Stick player [FUNC] button [SEL] button [RTN] button Deleting recor ded file Press the [FUNC] button for less than one second, when the recording file being played back. 1 Turn the [SEL] button to select Memory Stick. 2 The recorded files being played back can be deleted. Press the [SEL] button. 3 The Memory Stick setti[...]

86 How to operate the Memory Stick player [FUNC] button [SEL] button [RTN] button Formatting MG Memory Stick (quic k format) Press the [FUNC] button for less than one second. 1 Turn the [SEL] button to select Memory Stick. 2 MG memory stick can be formatted. Press the [SEL] button. 3 The Memory Stick setting mode is activated. The function mode is [...]

87 How to operate the Memory Stick player Press the [RTN] button. 7 At this time, other adjustments can also be made in Memory Stick setting mode. Press the [RTN] button. 8 At this time, other adjustments can also be made in function mode. Press the [FUNC] or [RTN] button to exit function mode. 9 ATTENTION • Do not turn ON/OFF the power or the ig[...]

88 How to operate the tuner T uning to a station First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting) Press the [FM AM] button to switch to the desi[...]

89 How to operate the tuner Press the [SEL] button for more than one second until a beep is heard. 2 The automatic preset mode starts. The [ASM ON] indicator on the screen flashes, and stations are automatically entered in memory under buttons [1] to [6]. These buttons are called preset buttons. ATTENTION • Press any numbered button to select the[...]

90 How to operate the tuner Manuall y setting stations into memory Press the [FM AM] button to switch between FM and AM. 1 Turn the [SEL] button to the right or left to tune to the station to be entered in memory. 2 This section covers the setting of stations in memory under the numbered buttons. Select any button, from [1] to [6], and press it for[...]

91 How to operate the tuner Preset station scan Press the [SEL] button for less than one second. 1 [P SCAN] will appear at the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each. To stop the preset scan mode at a desired station, press the [SEL] button again. 2 The receiver will stay tuned to the [...]

92 How to operate the tuner Setting a station name Press the [FUNC] button for less than one second while in the tuner mode. 1 Turn the [SEL] button to select Station Name. 2 Press the [SEL] button. 3 Press the [SEEK ] button to select the character type. 4 Pressing the button will switch types from [ABC] (upper-case alphabet characters) to, [123] [...]

93 How to operate the tuner [FUNC] button [SEL] button [RTN] button Turn the [SEL] button to the left or right to select characters. 6 Turn to the right: Advances the character forward in its type. Turn to the left: Moves the character backward in its type. [Symbol] Initial value [!] [Right direction] ! ¡ " ¡ # ¡ $ ¡ % ¡ & ¡ ’ ¡ ([...]

94 How to operate the tuner Deleting a station name Press the [FUNC] button for less than one second while in the tuner mode. 1 Hold the [6] button down for more than two seconds. 4 The station name has now been deleted. Turn the [SEL] button to select Station Name. 2 Press the [SEL] button. 3 The station name that is displayed at this point will b[...]

95 How to operate the tuner Changing the number of bands Press the [FUNC] button for less than one second while in the disc mode. 1 Turn the [SEL] button to select Memory Func. 2 Press the [SEL] button. 3 Turn the [SEL] button to select an address from A to E. 4 The selected item will be highlighted. The mode will change to memory allocation addres[...]

96 How to operate the tuner Buttons [1] Button [3] Changing the reception sensitivity f or automatic scanning Check that the deck is in standby mode. 1 Press and hold the button [1], then [FM AM] button, and hold both for more than three seconds. 2 The mode switches between AUTO mode and DX mode each time the buttons are pressed. Check that the dec[...]

97 How to operate the tuner FM reception characteristics A characteristic of transmitted signals is that lower frequencies travel further. FM frequencies are much higher than AM ’ s (similar to a ray of light): they won ’ t bend but they will reflect. Often, they will be interrupted by tall buildings, mountains, etc., taking direct and indirect[...]

98 How to operate the tuner A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna. In a moving vehicle, the area for good reception is limited because of varying conditions encountered while driving, including the types and heights of broadcast antenna structures, signal strength, engine [...]

99 How to operate the Sound Adjustment Mode About Sound Adjustment Mode Ho w to operate the Sound Adjustment Mode Normal mode Pro mode ○ (See page 108) × Graphic equalizer ○ (Simplified) (See page 113) ○ (See page 128) Time alignment ○ (See page 118) ○ (See page 130) Crossover ○ (See page 119) ○ (See page 132) Multi-harmonizer ○ (S[...]

100 How to operate the Sound Adjustment Mode A variety of materials are used inside a vehicle to manufacture the seats and windows, and because these materials absorb and reflect sound in different ways, the parametric equalizer lets you adjust the peaks and dips of the frequency characteristics inside the vehicle to compensate for this. An "e[...]

101 How to operate the Sound Adjustment Mode When this deck is in normal mode, a single parametric equalizer function is available in addition to the 13-band graphic equalizer, so that points that cannot be adjusted using the graphic equalizer can be corrected using the single-band parametric equalizer. In addition, in pro mode, the parametric equa[...]

102 How to operate the Sound Adjustment Mode With vehicle audio systems, the installation position of the speakers and the position of the listener mean that the distances from the listener to the left and right speakers are almost always different. These differences in the distance from the listener to each speaker in turn means that the time take[...]

103 How to operate the Sound Adjustment Mode For example, when adjusting the HPF, frequencies that are lower than the specified frequency are progressively dampened, rather than simply not being played back at all. The "slope" adjustment function is the function that is used to adjust these dampening characteristics. The slope characteris[...]

104 How to operate the Sound Adjustment Mode • The crossover function is a filter that allocates specified frequency bands. • A high-pass filter (HPF) is a filter that cuts out frequencies that are lower than the specified frequency (bass range) and allows higher frequencies (treble range) to pass through. • A low-pass filter (LPF) is a filte[...]

105 How to operate the Sound Adjustment Mode When original sounds are converted to MP3/WMA and Memory Stick (ATRAC3) format, frequency ranges that are not normally audible to the human ear are compressed. The multi- harmonizer can be used to play back these compressed sounds at as close to their original form as possible so that clear and powerful [...]

106 How to operate the Sound Adjustment Mode • Automatic parametric equalizer correction (Pro Mode only) This can be used to automatically correct distortion in frequency characteristics (peaks and dips) based on the results of measuring the frequency characteristics inside the vehicle. Automatic parametric equalizer correction is carried out in [...]

107 How to operate the Sound Adjustment Mode Operations during Normal Mode Turn the [SEL] button to select a setting item. 2 When the button is turned, the setting item changes in the following order and the selected item is highlighted. Press the [SOUND] button. 1 The mode will change to sound adjustment mode (normal mode). Refer to "operatio[...]

108 How to operate the Sound Adjustment Mode EQ (equalizer) mode can be used to adjust the frequency of the audio channels being played back in accordance with the genre and instruments of the music being played. In addition, correction of the frequency characteristics inside the vehicle is also possible using the 13-band graphic equalizer and the [...]

109 How to operate the Sound Adjustment Mode ATTENTION The initial EQ settings are factory preset. Fine-tuning EQ functions Fine adjustments can be made in each equalizer mode. Select the equalizer mode. Refer to the section "Switching equalizer modes" on page 108. Turn the [SEL] button to select the frequency to be adjusted. When the but[...]

110 How to operate the Sound Adjustment Mode Selecting an equalizer mode from memory Press a preset button to select the equalizer mode set in memory for the button. The buttons that set equalizer modes in memory are called preset buttons. Turn the [SEL] button to select EQ. Press the [SEL] button. Select any button, from [1] to [5], and press it f[...]

111 How to operate the Sound Adjustment Mode Making fine adjustments to the parametric equalizer You can select and adjust frequencies using the parametric equalizer (single-band). Turn the [SEL] button to select EQ and press the [SEL] button. Press the [SEL] button for more than one second. The mode will change to parametric equalizer adjustment m[...]

112 How to operate the Sound Adjustment Mode Press the [SEL] button for more than one second. The mode will return to equalizer setting mode. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] or [RTN] button to exit sound adjustment mode. 8 7 6 Press the [6] button for less than one second to[...]

113 How to operate the Sound Adjustment Mode This function corrects the position characteristics and frequency characteristics in order to delay the signals being output from the various speakers so that the signals from each speaker reach the listening position at the same time. Turn the [SEL] button to select Time Alignment. The selected item wil[...]

114 How to operate the Sound Adjustment Mode Position selector setting (Position) When the position of the listener's seat is selected, the time taken for the sound to travel from the speakers to the listener can then be adjusted in order to obtain a more natural sound orientation. This deck allows up to four different positions to be set. Tur[...]

115 How to operate the Sound Adjustment Mode Press the [RTN] button. Other time alignment items can be set at this time. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] or [RTN] button to exit sound adjustment mode. 6 5 4 Selecting the type of vehicle (Car Type) You can select the time alig[...]

116 How to operate the Sound Adjustment Mode Press the [RTN] button. Other time alignment items can be set at this time. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] or [RTN] button to exit sound adjustment mode. 6 5 4 Tweeter settings (Tweeter) You can select the tweeter installation lo[...]

117 How to operate the Sound Adjustment Mode Press the [RTN] button. Other time alignment items can be set at this time. Press the [RTN] button. At this time, other adjustments can also be made in normal mode. Press the [SOUND] or [RTN] button to exit sound adjustment mode. 6 5 4 Rear speaker position selection (Rear SP) You can select the rear spe[...]

118 How to operate the Sound Adjustment Mode The frequencies for the front and rear speaker high-pass filter (HPF) and woofer low-pass filter (LPF) can be set within a range of 63 to 200 Hz. (This is the same as the HPF and LPF cutoff frequencies.) Turn the [SEL] button to select X-Over. The selected item will be highlighted. Press the [SEL] button[...]

119 How to operate the Sound Adjustment Mode This function uses harmonic synthesis to restore the high- frequency component that is lost as a result of the compression process so that fresher sound can be obtained during MP3 /WMA, Memory Stick (ATRAC3) playback. Turn the [SEL] button to select Harmonizer. The selected item will be highlighted. Pres[...]

120 How to operate the Sound Adjustment Mode The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony. Turn the [SEL] button to select Non-F Phase. The selected item will be highlighted. Press the [SEL] button. T[...]

121 How to operate the Sound Adjustment Mode Operations during Pr o Mode Turn the [SEL] button to select a setting item. 3 When the button is turned, the setting item changes in the following order and the selected item is highlighted. Press the [SOUND] button. 1 The mode will switch to sound adjustment mode (normal mode). Press the [SOUND] button [...]

122 How to operate the Sound Adjustment Mode There are 10 Mid & Hi-Frequency locations (5 + 5) available for the parametric equalizer. The Parametric Equalizer is divided into two groups Mid & Hi. Any frequency assigned is highlighted in White, and is unavailable for use elsewhere. Bands selected are grayed out in the diagram to show how th[...]

123 How to operate the Sound Adjustment Mode Turn the [SEL] button to select PEQ. The selected item will be highlighted. Press the [SEL] button. The mode will change to parametric equalizer adjustment mode. Press the [SEL] button for less than one second to select the channel and band to be adjusted. Each time the button is pressed, the selection c[...]

124 How to operate the Sound Adjustment Mode ATTENTION When updating software, press the [DISP] button to measure and display the frequency characteristics. Press the [SEEK /FAST ] button. This adjusts the frequency level. [SEEK ] button: Increases level. [FAST ] button: Decreases level. Press the [6] button for less than one second to select the Q[...]

125 How to operate the Sound Adjustment Mode Selecting an equalizer mode from memory Press a preset button to select the equalizer mode set in memory for the button. The buttons that set equalizer modes in memory are called preset buttons. Turn the [SEL] button to select PEQ. Press the [SEL] button. Select any button, from [1] to [5], and press it [...]

126 How to operate the Sound Adjustment Mode [AUDIO CONTROL] button Measuring/display frequenc y characteristic Frequency characteristics inside the vehicle can be measured and displayed on the display. The measurement result can be referred to when adjusting parametric equalizer. This result is also necessary to automatically correct parametric eq[...]

127 How to operate the Sound Adjustment Mode Press the [DISP] button for more than two seconds. Pink noise will be output from the speakers and measurement of the frequency characteristics will start. [Measuring] will appear on the display while measurement is in progress. When measurement is complete, the measurement results will appear on the dis[...]

128 How to operate the Sound Adjustment Mode The delay time and level of the sound from each speaker can be adjusted in order to correct any phase mismatches in the sound resulting from the listening position. Turn the [SEL] button to select Time Alignment. The selected item will be highlighted. Press the [SEL] button. The mode will change to time [...]

129 How to operate the Sound Adjustment Mode Refer to the following for the method of calculating the delay time. A = (B - C) / 34 A: Delay time (ms) B: Distance from listening position to furthest speaker (cm) C: Distance from listening position to the speaker to be adjusted (cm) (Example) Listening position: Driver's seat (left) B: 200 (cm) [...]

130 How to operate the Sound Adjustment Mode This adjustment is for 3-way speaker system which uses different speakers for different ranges (treble range: tweeters, medium range: Mid, bass range: woofers). In this case, the crossover function applies the HPF to the treble-range speakers, it applies the HPF and LPF to the medium-range speakers, and [...]

131 How to operate the Sound Adjustment Mode Press the [SEEK /FAST ] buttons to set the slope. [SEEK ] button : The slope becomes more gentle. [FAST ] button : The slope becomes steeper. The slope can be set to "PASS", "6dB/oct", "12dB/oct", "18dB/oct" or "24dB/oct". Repeat the operations in steps t[...]

132 How to operate the Sound Adjustment Mode This function uses harmonic synthesis to restore the high- frequency component that is lost as a result of the compression process so that fresher sound can be obtained during MP3 /WMA, Memory Stick (ATRAC3) playback. Turn the [SEL] button to select Harmonizer. The selected item will be highlighted. Pres[...]

133 How to operate the Sound Adjustment Mode The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony. Turn the [SEL] button to select Non-F Phase. The selected item will be highlighted. Press the [SEL] button. T[...]

134 How to operate the Sound Adjustment Mode [FUNC] button [SEL] button [RTN] button Writing/reading sound quality data The sound quality data for the deck can be saved on a Memory Stick. This data can be used to adjust the sound quality using E-iSERV (web site). Insert the Memory Stick to be used for writing the sound quality data. Press the [FUNC[...]

135 How to operate the Sound Adjustment Mode Press the [RTN] button. At this time, other adjustments can also be made in function mode. Press the [FUNC] or [RTN] button to exit function mode. 8 7 ATTENTION • Sound quality data is written to Memory Stick as follows. • The folders and files that are required for E-iSERV sound effect customization[...]

136 How to operate the Sound Adjustment Mode The sound quality data that has been downloaded from E- iSERV (web site) to a Memory Stick can be loaded into the deck and saved there. Insert the Memory Stick to be used for saving the sound quality data. Press the [FUNC] button. The function mode is activated. Turn the [SEL] button to select the Data R[...]

137 How to operate the Sound Adjustment Mode Press the [SEL] button. The selected file will be saved. When reading has finished, [Completed] will appear on the display and then it will return to the display for selecting the function mode. 6 Press the [FUNC] or [RTN] button to exit function mode. 7 ATTENTION • Make a folders in the Memory Stick a[...]

138 How to use the NOB remote control Ho w to use the NOB remote control Cleaning the remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction. • Keep the remote control free of[...]

139 How to use the NOB remote control [MUTE] button Muting the v olume Press the [MUTE] button for more than one second to cut the volume or restore it instantly. ATTENTION Press the [MUTE] button for more than one second if E-COM is connected and less than one second if E-COM is not connected to cut the volume or restore it instantly. DISC BAND MO[...]

140 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [MODE] button [BAND] button Switching pla yback modes How to pla y the tuner Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc Memory Stick AUX Selecting the FM/AM band Press the [BAND] button.[...]

141 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [ TUNE • SEEK ] buttons [ DISC ] buttons [BAND] button Selecting a station (manuall y or automatically) A short press of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. Press the [...]

142 How to use the NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [E-COM] button [ILLUMI] button [ DISC ] buttons [ TRACK ] buttons Adv ancing to the next trac k or returning to the beginning of the track being pla yed Press the [ TRACK ] button. [ ] button: Skips to the next track. [ ] button: Returns to [...]

143 How to use the NOB remote control DISC BAND MO DE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [SEL] button [FUNC] button [RTN] button [ DISC ] buttons [ TRACK ] buttons Switching the remote contr ol settings Press the [FUNC] button of the main unit. 1 Turn the [SEL] button to select a pattern. 4 Remote control functions can be switc[...]

144 How to use the NOB remote control Warning To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor immediately. Replacing the battery Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow. 1 Use two AA-size batteries. I[...]

145 How to use the NOB remote control • Be extremely careful not to swallow the battery. • The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lamp gets dim, replace the batteries. • Be sure to orient the batteries correctly so that the positive and negative poles match the diagra[...]

146 How to use an optional Card remote control Ho w to use an optional Card remote contr ol [PWR] button [MUTE] button [+] button [ - ] button Remote-control light receptor T urning the power on/off Press the [PWR] button. 1 The power turns on or off each time the button is pressed. When the power is turned on, the state used when the power was tur[...]

147 How to use an optional Card remote control [MODE] button [BAND] button Switching pla yback modes Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc Memory Stick AUX How to pla y the tuner Selecting the FM/AM band Press the [BAND] button. Each press will switch tuner modes from FM1 ➔ FM2 ➔ FM3 ?[...]

148 How to use an optional Card remote control [BAND] button [ PRESET CH ] buttons [ TUNE • SEEK ] buttons Selecting a station (manuall y or automatically) Press the [ TUNE • SEEK ] button. [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations. 1 A short press of the button will allow manual station tunin[...]

149 How to use an optional Card remote control [ DISC ] buttons [ TRACK • APS ] buttons [MUTE] button Press the [ TRACK • APS ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played. (Press repeatedly to move to previous tracks.) 1 Skipping to the next or pre vious disc Press the [ DISC ] bu[...]

150 How to use an optional Card remote control [SEL] button [FUNC] button [RTN] button [ DISC ] buttons [ TRACK ] buttons Switching the remote contr ol settings Remote control functions can be switched to the three patterns. Press the [FUNC] button of the main unit. 1 Turn the [SEL] button to select a pattern. 4 PATTERN A: Conventional functions PA[...]

151 How to use an optional Card remote control Replacing the battery On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carrier with your fingernail. 1 Use one CR2025 battery. Unlock Remove the old battery, then place the new one in the carrier with the (+) mark facin[...]

Some connected CD changers will allow you to switch the input channel. Each time the button is pressed, the input channel will switch between analog input and digital input. Switching the input c hannel Press the [SEL] button for more than one second. 1 152 How to operate the receiver with an optional CD changer connected Ho w to operate the receiv[...]

153 How to operate the receiver with an optional CD changer connected Pla ying the beginning of tracks (SCAN) Press button [4]. 1 Pressing the button causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is pressed again. Hold the[...]

154 How to operate the receiver with an optional CD changer connected Pla ying tracks in random or der (RANDOM) Press button [6]. 1 Pressing on the button causes the changer to play the tracks on the currently playing CD in random order, until the button is pressed again. Hold the button until the [ALL RANDOM] display appears to play tracks from al[...]

155 How to operate the receiver with an optional CD changer connected Buttons 1 2 3456 C D 123456 7 8 9 1 01 11 2 To select a CD from nos. 7 to 12, press the desired button considerably longer. Press the [SEL] button for less than one second. 1 Press a button from [1] to [6]. 2 Specifying a CD to pla y A CD of your choice is directly selectable out[...]

156 Others Connecting P or table A udio Play ers to the A UX Jac k Turn on the portable audio player and start its play function. 1 Switch to AUX mode by pressing the [DISC] button for more than one second. 2 Activation of the AUX mode will light the "AUX" indicator and channel audio player output to the system speakers. Use a commonly av[...]

157 Others Button [1] You can switch the external input method for the deck. Select the method that matches the output method for the portable audio player that is connected to the deck. In AUX mode, press button [1] or button [4]. Button [1]: Switches to digital input. Button [4]: Switches to analog input. 1 Switching the e xternal input method (a[...]

158 If you have a question: First check the items mentioned below before attempting to troubleshoot problems. Caution If y ou ha ve a question: [RESET] button If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a paper clip or similar item[...]

159 If you have a question: Displa yed information (f or tr oubleshooting) The information listed in the chart below is displayed to show the status of the CD, Memory Stick player and CD changer. Refer to the chart for the appropriate action. INFO 2 NO DISC LOADED IN THE MAGAZINE There is no disc in the magazine or player. Load a disc in the magazi[...]

160 If you have a question: MSINFO 1 YOU TRIED TO PLAYBACK AND RECORDING WHEN NO MG MEMORY STICK WAS INSERTED Insert MG Memory Stick. MSINFO 2 YOU TRIED TO PLAYBACK AN INCORRECTLY FORMATTED MEMORY STICK Use the deck to format the Memory Stick. MSINFO 3 THE WRITE PROTECTION SWITCH IS LOCKED. Unlock the write protection switch. MSINFO 4 THE MEMORY ST[...]

161 If you have a question: Problem Mode Causes Remedial action to take Refer to page Common to all Dead or weak sound Power does not turn on. Frequencies or titles set in memory are deleted. No guide tone sounds. The remote control does not work. Is the volume control up sufficiently? Turn up the volume control. 41 41 42 53 89, 90 144, 151 144, 15[...]

162 If you have a question: Tuner Problem Mode Causes Remedial action to take Refer to page Receives no stations, or receives static noise. Is the antenna retracted? Extend the antenna. Tune to a station. Tune to a local station. (Please note, there may be no local stations servicing the area where you are currently driving.) Avoid operating such e[...]

163 Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 3A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/8" (178 x 50 x 155mm) Mass (weight) Approx. 1.7kg Usage temperature range -20 ° C to +65 ° C (-4 ° F to +149 ° F ) Storage temperature range -40 ° C to +85 ° C (-20 ° F to +185 ° F ) < [...]

164 Before installation Installation angle In order to maintain proper functioning, install the unit within an angle of 30 degrees from horizontal (standard). If this is not done, sound skipping or ejection of the CD may occur. FRONT ST ANDARD WITHIN AN ANGLE OF 30 DEGREES No. Item Q'ty 1 Main unit 1 2 Mounting sleeve 1 3 Side bracket 2 4 Rear[...]

165 Mounting instruction Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicle dash board or console box. 1 Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve. 2 Attach the side brackets to the main unit using flathead screws. 3 BEND THE MOUNTING T ABS[...]

166 Mounting instruction Mount the stud bolt to the main unit. 4 Insert the main unit into the mounting sleeve until it locks in place. 5 Fasten the rear of the main unit using either method [A] or [B]. 6 Install the bezel on the main unit. 7 TOP TOP BEZEL 5 MOUNTING SLEEVE 2 STUD BOL T 8 BUSHING MET AL OF VEHICLE DASH BOARD OR CONSOLE BOX 6 Select[...]

167 Mounting instruction Names of lead wires and destinations (refer to P ag e 168) No. Name Wire color Destination 1 ACC Red Connect where the power comes on when the ignition is in the ACC position. 2 B+ Yellow Connect where the power is constantly available, regardless of the ignition switch's position. 3 Ground Black Connect where good bod[...]

168 Mounting instruction System CD8454 CD8454 CD8454 CD8454 CD8454 21010[...]

169 Mounting instruction CD8454 Receiver , used alone 1) TO BA TTERY+12V (Permanent supply) 2 TO POWER ANTENNA RELA Y (Supply) TO HEAD LIGHT SWITCH (Illumination) TO TURN ON LEAD OF EACH UNIT (Supply) TO ACC (Power supply) 1 4 5 6 TO GROUND 3 INTERCONNECTING CABLE 12 Black Blue/White Orange/White Blue Red Y ellow CD8454 NO CONNECTION 16 ANTENNA PLU[...]

170 Mounting instruction CD8454 + CH3083 + P ower Amplifier 2) TO BA TTERY+12V (Permanent supply) 2 TO POWER ANTENNA RELA Y (Supply) TO HEAD LIGHT SWITCH (Illumination) TO TURN ON LEAD OF EACH UNIT (Supply) TO ACC (Power supply) 1 4 5 6 TO GROUND 3 INTERCONNECTING CABLE 12 Black Blue/White Orange/White Blue Red Y ellow 13P 2P CH3083 CD8454 NO CONNE[...]

171 Mounting instruction TO BA TTER Y+12V (Permanent supply) 2 TO POWER ANTENNA RELA Y (Supply) TO HEAD LIGHT SWITCH (Illumination) TO TURN ON LEAD OF EACH UNIT (Supply) TO ACC (Power supply) 1 4 5 6 TO GROUND 3 INTERCONNECTING CABLE 12 Black Blue/White Orange/White Blue Red Y ellow CH3083 CD8454 NO CONNECTION TO SIGNAL INPUT OF AUXILIARY POWER AMP[...]

172 Mounting instruction CD8454 + CH3083 + 21010 + P ower Amplifier 4) TO BA TTERY+12V (Permanent supply) 2 TO POWER ANTENNA RELA Y (Supply) TO HEAD LIGHT SWITCH (Illumination) TO TURN ON LEAD OF EACH UNIT (Supply) TO ACC (Power supply) 1 4 5 6 TO GROUND 3 INTERCONNECTING CABLE 12 Black Blue/White Orange/White Blue Red Y ellow 13P 2P CH3083 CD8454 [...]

173 Mounting instruction CD8454 + CH3083 + P ower Amplifier (f or Pro-Mode) 5) TO BA TTERY+12V (Permanent supply) 2 TO POWER ANTENNA RELA Y (Supply) TO HEAD LIGHT SWITCH (Illumination) TO TURN ON LEAD OF EACH UNIT (Supply) TO ACC (Power supply) 1 4 5 6 TO GROUND 3 INTERCONNECTING CABLE 12 Black Blue/White Orange/White Blue Red Y ellow 13P 2P CH3083[...]

174 How to contact customer service Should the product require service, please contact your nearest following Eclipse dealer. < U.S.A/CANADA > DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 Phone: (310) 327-2151 < AUSTRALIA > FUJITSU TEN (AUSTRALIA) PTY LTD. ECLIPSE AUSTRALIA Phone: 1800-211-411 [...]

175 How to contact customer service < KOREA > HYUNDAI AUTONET Co., LTD. 1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku, Seoul, Korea 135-080 Phone: 02-508-6001 Fax: 02-2-508-6067 Transpectra Co., Ltd. 115-16 nonhyun dong kangnam ku Seoul, Korea. Phone: 02-540-4595 Fax: 02-2-540-4666 < TAIWAN > Sentrek Taiwan, LTD. 1, 9F, Lane 1[...]

176 Memo ••••••••••••••••••••••••••••••••••••••••••••••••••••[...]

177 Memo ••••••••••••••••••••••••••••••••••••••••••••••••••••[...]

178 Memo ••••••••••••••••••••••••••••••••••••••••••••••••••••[...]

IMPOR T ANT RECORD Y OUR “KEY CD” OR “MEMOR Y STICK (SECURITY CODE)” HERE… ST ORE Y OUR “KEY CD” OR “MEMOR Y STICK (SECURITY CODE)” ALONG WITH Y OUR O WNER’S MANU AL T AKE THIS OUT . 179[...]

090001-1457A700 0405 (Y. O) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD8454 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU TEN LIMITED[...]