Eclipse CD3404 Bedienungsanleitung

OWNER'S MANUAL We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference. ESN E3 High-Power CD Receiver MODEL CD3404[...]

For y our safety in using the CD3404 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD3404. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and to avoid property damage. Before reading through the manual, take time to read through and learn [...]

3 • Do not place the vinyl storage bag over a person. It may cause a serious accident or death by suffocation. • Do not adjust the controls while driving the car. To adjust the controls, stop the car in a safe location. • To prevent accidents, store batteries for the remote control out of the reach of small children. In case a child swallows [...]

4 • To prevent a short circuit from occurring, disconnect the battery's negative terminal before installing this product. Otherwise, an electric shock or injury may result. • When using an existing nut and/or bolt from the vehicle to ground this product, do not use any that secure parts of the steering or braking systems. Otherwise, an acc[...]

5 • Play the audio at a moderate volume level that permits you to hear sounds from outside the car. Driving without being able to hear outside sounds may result in an accident. • Keep foreign objects out of the disc slot. They may cause fire or electrical shock. Another possibility is that discs may be damaged or become stuck. • Do not stick [...]

6 • Avoid installing this product in places where it may get wet, such as near windows, or in places that are moist or dusty. Presence of liquid, moisture or dust inside this product can cause short circuiting, resulting in smoke or fire. • Do not install this product in locations where it cannot be fastened securely, such as places subject to [...]

7 T able of Contents Operating precautions ............................................. 10 Notes on operation ..................................................................... 10 About compact discs .................................................................. 11 About cleaning a CD ........................................................[...]

8 How to operate the CD player ................................. 28 Listening to CDs ......................................................................... 28 Advancing to the next track or returning to the beginning of the track being played ...................................................................... 29 Fast Forward/Rewind ..........[...]

9 How to use an optional NOB remote control ........ 45 Turning the power on/off ............................................................ 45 Adjusting the audio volume ........................................................ 45 Cutting the volume instantly (muting) ................................... 45 Switching playback modes ................[...]

10 Operating precautions <Your CD3404 will perform well over a long period of time through correct handling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard. • We recommend using with this player a disc with the logo shown to the left. • You can play music CDs(CD-R/CD-RW) on this player. Be [...]

11 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback. Observe the following precautions to ensure high quality sound performance: • Do not leave an eject[...]

12 Operating precautions About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “improving sound performance” or “protecting CDs.” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player. About brand new CDs • You may notice t[...]

13 Operating precautions About borrowed CDs • Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get stuck inside or damage the deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot. Pressing downward in the process may scratch the recorded surface of the disc. OKA [...]

14 Names of controls and parts Names of contr ols and par ts Switches disc modes. Ejects compact disc. Selects radio preset channels and performs disc mode functions. Inserts compact discs. Switches screen display. Automatically finds radio reception and fast forward/rewind. Selects radio stations and CD tracks. Turns function mode ON/OFF. Returns [...]

15 ESN security operating procedure ESN security operating pr ocedure About ESN This deck incorporates ESN (ECLIPSE Security Network). The ESN is a security system which disables all deck functions when the power is restored if the deck is stolen from the vehicle. Turning the power of the deck off or switching the vehicle ' s ignition switch o[...]

16 ESN security operating procedure ATTENTION • If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsert the ejected CD. • If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds. Try another CD. • The Security indicator will[...]

17 ESN security operating procedure ATTENTION • This process cancels the protection for the ESN deck. • If power to the ESN deck is disconnected, then reconnected, a Key CD will not need to be inserted in order to return the unit to normal operation. • Inserting a CD other than the Key CD will not cancel the protection. Instead, the display [[...]

18 ESN security operating procedure ATTENTION • If an incorrect CD is inserted, an [ERR_] ("ERR" and error number) message will appear for two seconds, after which the CD will be ejected. • If [ERR5] (the 5th time an error has occurred) appears, [HELP] will appear, after which the CD will be ejected. When [HELP] appears, carry out the[...]

19 ESN security operating procedure ATTENTION • If an incorrect CD is inserted, an [ERR_] ("ERR" and error number) message will appear for two seconds, after which the CD will be ejected. • This process cancels the protection for the ESN deck. After the 5th incorrect attempt, the display reads [HELP] for five seconds. [HELP] will appe[...]

20 ESN security operating procedure How to turn the security indicator on/off With the power OFF, press button [2], then the [FUNC] button and hold both for more than one second. 1 [IND. FLASH] or [IND. -----] appears on the display. 2 [IND. FLASH] means the security indicator will flash when the vehicle ’ s ignition is off, and [IND. -----] mean[...]

21 Basic operation Turning the power on and off. When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. When the vehicle has no ACC position on the ignition switch, care is needed when turning off the deck. Follow Step 2 or Step 3 when turning off the power. T urning the power on and off [...]

22 Basic operation Listening to a CD Insert a CD into the disc slot, label side up. 1 The CD will start playing. ATTENTION When a CD is already loaded, press the [DISC] button to switch to the CD mode. [DISC] button[...]

23 Basic operation Listening to the tuner Press the [FM AM] button. 1 This will turn the tuner on. Press the [FM AM] button to switch to the desired FM or AM bands. 2 Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. Turn the [SEL] button to the left or right to tune to a station. 3 Turn to the right:[...]

24 Basic operation Various audio control modes may be fine-tuned using this procedure. Modes will switch in the order shown below each time the button is pressed. Switching audio contr ol modes Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted. 1 VOL BASS TREB BAL FAD Adjusts volume. Turn the [AUDIO CONTROL[...]

25 Basic operation Adjusts left/right speaker balance. Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes right speakers. Turn to the left: Emphasizes left speakers. Adjusts front/rear speaker balance. Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes front speakers. Turn to the lef[...]

26 Basic operation A variety of settings can be changed. The function mode is activated. Setting items will be displayed in the following order when the [SEL] button is turned to the right. Making changes with Function Mode Press the [FUNC] button. 1 Turn [SEL] button in either direction to display setting items for selection. 2 [FUNC] button [RTN][...]

27 Basic operation This receiver uses the 12-hour display notation. Turn [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Turn [SEL] button to display the item to be selected for adjustment. Hours, minutes or exact hour will be switched each time the button is turned. Press the [SEEK /FAST ] button. [...]

28 How to operate the CD player Listening to CDs Press the [DISC] button. 1 First press the [DISC] button to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. This starts CD play. Playback may be intermittent when there is a scratch on a CD or when the recorded side is dirty. Caution Ho w to operate the CD[...]

29 How to operate the CD player Adv ancing to the next trac k or returning to the beginning of the trac k being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track. Turn to the left: Returns to the beginning of the track being played. (Repeat turning for previous tracks.) Pla ying the beginning of trac[...]

30 How to operate the CD player Repeating the same trac k (REPEA T) Press button [5] to repeat the track being played. 1 To cancel, press button [5] again. Pla ying tracks in random or der (RANDOM) Press button [6] to play the tracks in random order. 1 To cancel, press button [6] again. ATTENTION • Doing random playback, press button [5] to repea[...]

31 How to operate the CD player Ejecting the disc Press the [ (EJECT)] button. 1 Disc is ejected. [ (EJECT)] button [DISP] button Switching the displa y Press the [DISP] button. 1 Each time the button is pressed, the following will be displayed in order. Elapsed time ➔ Clock[...]

32 How to operate the tuner T uning to a station Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in [...]

33 How to operate the tuner Press the [SEL] button for more than two seconds until a beep is heard. 2 The automatic preset mode starts. The [ASM ON] indicator on the screen flashes, and stations are automatically entered in memory under buttons [1] to [6]. These buttons are called preset buttons. ATTENTION • Press any numbered button to select th[...]

34 How to operate the tuner Manuall y setting stations into memory Press the [FM AM] button to switch between FM and AM. 1 Turn the [SEL] button to the right or left to tune to the station to be entered in memory. 2 This section covers the setting of stations in memory under the numbered buttons. Select any button, from [1] to [6], and press it for[...]

35 How to operate the tuner Preset station scan Press the [SEL] button for less than one second. 1 [P SCAN] will appear at the top of the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each. To stop the preset scan mode at a desired station, press the [SEL] button again. 2 The receiver will stay tu[...]

36 How to operate the tuner Changing the reception sensitivity f or automatic scanning Turn OFF the power. 1 Press and hold the [FM AM] button, then button [1], and hold both for more than three seconds. 2 The mode switches between AUTO mode and DX mode each time the buttons are pressed. Turn OFF the power. 1 Press the [FM AM] button, then button [[...]

37 How to operate the tuner FM reception characteristics A characteristic of transmitted signals is that lower frequencies travel further. FM frequencies are much higher than AM ’ s (similar to a ray of light): they won ’ t bend but they will reflect. Often, they will be interrupted by tall buildings, mountains, etc., taking direct and indirect[...]

38 How to operate the tuner A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna. In a moving vehicle, the area for good reception is limited because of varying conditions encountered while driving, including the types and heights of broadcast antenna structures, signal strength, engine [...]

39 How to use an optional Card remote control Cleaning the remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction. • Keep the remote control free of moisture, dust and water. [...]

40 How to use an optional Card remote control [PWR] button [MUTE] button [+] button [ - ] button Remote-control light receptor T urning the power on/off Press the [PWR] button. 1 The power turns on or off each time the button is pressed. When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restor[...]

41 How to use an optional Card remote control [MODE] button [BAND] button Switching pla yback modes Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc How to pla y the tuner Selecting the FM/AM band Press the [BAND] button. Each press will switch tuner modes from FM1 ➔ FM2 ➔ FM3 ➔ AM. 1 Select th[...]

42 How to use an optional Card remote control [BAND] button [ PRESET CH ] buttons [ TUNE • SEEK ] buttons Selecting a station (manuall y or automatically) Press the [ TUNE•SEEK ] button. [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations. 1 A short tap of the button will allow manual station tuning. Pr[...]

43 How to use an optional Card remote control [ TRACK • APS ] buttons Press the [ TRACK • APS ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played. (Press repeatedly to move to previous tracks.) 1 ATTENTION Hold the [ ] button down to fast forward, or the [ ] button to rewind through the [...]

44 How to use an optional Card remote control Replacing the battery On the back of the remote control, while pressing the locking knob on the battery slot cover toward your right, pull out the battery carrier with your fingernail. 1 Use one CR2025 battery. Unlock Remove the old battery, then place the new one in the carrier with the (+) mark facing[...]

45 How to use an optional NOB remote control Cutting the v olume instantly (m uting) Press the [MUTE] button to cut the volume or restore it instantly. DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [PWR] button [MUTE] button Remote-control light receptor [AUDIO CONTROL] button T urning the power on/off Press the [PWR] butto[...]

46 How to use an optional NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [MODE] button [BAND] button Switching pla yback modes How to pla y the tuner Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc Selecting the FM/AM band Press the [BAND] button. Each pres[...]

47 How to use an optional NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [ TUNE • SEEK ] buttons [ DISC ] buttons [BAND] button Selecting a station (manuall y or automatically) A short tap of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. Press[...]

48 How to use an optional NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK P U S H - M O D E [ TRACK ] buttons Adv ancing to the next trac k or returning to the beginning of the track being pla yed Press the [ TRACK ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played. [...]

49 How to use an optional NOB remote control Warning To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor immediately. Replacing the battery Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow. 1 Use two AA-size batte[...]

50 How to use an optional NOB remote control • Be extremely careful not to swallow the battery. • The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lamp gets dim, replace the batteries. • Be sure to orient the batteries correctly so that the positive and negative poles match the[...]

51 If you have a question: First check the items mentioned below before attempting to troubleshoot problems. If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a sharp tool. Pressing the [RESET] button will delete all the entries from mem[...]

52 If you have a question: Information Code Table When "INFO " flashes on the indicator Nos.3,5 are displayed. Information Contents Explanation and remedial action to take 3 DISCS ARE DIRTY OR The loaded disc is dirty or upside down. Check DAMAGED it for proper orientation and verify it is clean. 5 CD PLAYER FAILS • The CD player is ino[...]

53 If you have a question: The remote control does not work. No guide tone sounds. Frequencies or titles set in memory are deleted. Power does not turn on. Dead or weak sound Common to all Is the volume control up sufficiently? Problem Mode Causes Remedial action to take Refer to page Is the fader or balance control set far to one side? Other proba[...]

54 If you have a question: CD Problem Mode Causes Remedial action to take Refer to page The disc cannot be ejected. The disc cannot be inserted. The disc is ejected as soon as it is inserted. Or, the disc cannot be ejected. Sound skips around. Sound is intermittent. Sound is bad in quality. Is an extra label or seal applied to the disc? Are there r[...]

55 Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 3A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/5" (178 x 50 x 158mm) Mass (weight) Approx. 1.4kg Usage temperature range -20 ° C to + 65 ° C (-4 ° F to 149 ° F ) Storage temperature range -40 ° C to + 85 ° C (-20 ° F to 185 ° F ) < F[...]

Installation angle In order to maintain proper functioning, install the unit within an angle of 30 degrees from horizontal (standard). If this is not done, sound skipping or ejection of the CD may occur. FRONT ST ANDARD WITHIN AN ANGLE OF 30 DEGREES 56 Before installation No. Item Q'ty 1 Main unit 1 2 Mounting sleeve 1 3 Side bracket 2 4 Rear [...]

57 Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicle dash board or console box. 1 Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve. 2 Attach the side brackets to the main unit using flathead screws. 3 BEND THE MOUNTING T ABS. DASH BOARD OR CONSOL[...]

58 Mounting instruction Mount the stud bolt to the main unit. 4 Insert the main unit into the mounting sleeve until it locks in place. 5 Fasten the rear of the main unit using either method [A] or [B]. 6 Install the bezel on the main unit. 7 TOP TOP BEZEL 5 MOUNTING SLEEVE 2 STUD BOL T 8 BUSHING MET AL OF VEHICLE DASH BOARD OR CONSOLE BOX 6 Select [...]

59 Mounting instruction Names of lead wires and destinations (refer to P age 61) No. Name Wire color Destination 1 ACC Red Connect where the power comes on when the ignition is in the ACC position. 2 B+ Yellow Connect where the power is constantly available, regardless of the ignition switch's position. 3 Ground Black Connect where good body g[...]

60 Mounting instruction System[...]

61 Mounting instruction ANTENNA PLUG CD3404 TO BA TTERY + 12V (Permanent Supply) INTERCONNECTING CABLE 2 16P Y ellow Blue Orange/White Blue/White Black Red TO GROUND 3 CELLULAR PHONE 10 FRONT 8 REAR 7 12 TO POWER ANTENNA RELA Y (Supply) TO HEADLIGHT SWITCH (Illumination) TO TURN-ON LEAD OF EACH UNIT (Supply) TO ACC (Power Supply) White (+) (–) (+[...]

62 Mounting instruction INSULA TE EACH WIRE WITH T APE INSULA TE EACH WIRE WITH T APE TO SIGNAL INPUT OF AUXILIARY POWER AMPLIFIER CD3404 16P ANTENNA PLUG TO BA TTERY + 12V (Permanent Supply) INTERCONNECTING CABLE 2 Y ellow Blue Orange/White Blue/White Black Red TO GROUND 3 FRONT 7 REAR 8 12 TO POWER ANTENNA RELA Y (Supply) TO HEADLIGHT SWITCH (Ill[...]

63 Memo ••••••••••••••••••••••••••••••••••••••••••••••••••••[...]

64 How to contact customer service Should the product require service, please contact your nearest following Eclipse dealer. < U.S.A/CANADA > DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 Phone: (310) 327-2151 < AUSTRALIA > FUJITSU TEN (AUSTRALIA) PTY LTD. ECLIPSE AUSTRALIA Phone: 1800-211-411 &[...]

65 How to contact customer service < KOREA > HYUNDAI AUTONET Co., LTD. 1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku, Seoul, Korea 135-080 Phone: 02-508-6001 Fax: 02-2-508-6067 Transpectra Co., Ltd. 115-16 nonhyun dong kangnam ku Seoul, Korea. Phone: 02-540-4595 Fax: 02-2-540-4666 < TAIWAN > Sentrek Taiwan, LTD. 1, 9F, Lane 15[...]

66 Memo ••••••••••••••••••••••••••••••••••••••••••••••••••••[...]

IMPOR T ANT RECORD Y OUR “KEY CD” HERE… ST ORE Y OUR “KEY CD” ALONG WITH Y OUR O WNER’S MANU AL IN Y OUR SOCK DRA WER. 67[...]

090001-14560700 0312MT (Y.TS) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD3404 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU TEN LIMITED[...]