Eiki DLP Projector EIP-5000 Bedienungsanleitung

EIP-5000 EIP-5000L OWNER’S MANUAL EIKI INDUSTRIAL CO., L TD. ®[...]

ii IMPORT ANT • For your assistance in reporting the loss or theft of your Projector , please r ecord the Model and Serial Numbers located on the bottom of the pr ojector and retain this information. • Before r ecycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of “Supplied acces[...]

1 Before using the projector , please read this owner’s manual carefully . 1. W ARRANTY This is to assur e that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase. 2. CONSUMER PRODUCT SAFETY ACT T o ensur e that you will pr omptly receive any safety notification of inspection, modificatio[...]

2 W ARNING: The cooling fan in this projector continues to run for about 90 seconds after the pr ojector enters the standby mode. During normal operation, when putting the projector into standby mode always use the ST ANDBY -ON button on the projector or on the r emote control. DURING NORMAL OPERA TION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING[...]

3 56 Menu items The menu can be operated to achieve tw o functions, adjustments and settings. (For setting the menu items, see pages 58 and 59 . ) Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright” • This operation can also be performed by using the b uttons on the projector. ENTER button MENU button UNDO butto[...]

4 Contents Preparing Introduction How to Read This Owner ’ s Manual .............. 3 Contents .......................................................... 4 How to Access the PDF Owner ’ s Manuals ....... 7 IMPORT ANT SAFEGUARDS .......................... 8 Accessories .................................................. 1 1 Part Names and Function[...]

5 Using Basic Operation Setting the Resize Mode ................................... 74 Shifting the Projected Image V er tically (Digital Shift) ................................................ 75 Setting On-screen Display ................................. 75 Setting the Video System ................................... 76 Capturing Projected Images[...]

6 Contents The optional lenses are introduced on page 12 . Please purchase the lens for your desired usage. Reference Appendix Maintenance ................................................. 93 Maintenance Indicators ............................... 94 Regarding the Lamp .................................... 96 Lamp ....................................[...]

7 How to Access the PDF Owner ’ s Manuals Info • If the desired pdf file cannot be opened by double clicking the mouse, start Adobe ® Reader ® first, then specify the desired file using the “File”, “Open” menu. SETUP MANUAL Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for details. Setting up the Screen ............[...]

8 1. Read Instructions All the safety and operating instructions should be read befor e the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future r eference. 3. Heed W arnings All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions All opera[...]

9 Ensur e that you read the following safeguar ds when setting up your pr ojector . Caution concerning the lamp unit ■ Potential hazard of glass particles if lamp rup- tures. In case of lamp rupture, contact your nearest EIKI Authorized Dealer or Service Center for replacement. See “Replacing the Lamp” on page 96 . Caution concerning the setu[...]

10 Using the projector in other countries ■ The power supply voltage and the shape of the plug may vary depending on the region or country you are using the projector in. When using the projector overseas, make sure you use an appropriate power cord for the country you are in. T emperature monitor function ■ If the projector starts to over- hea[...]

11 Accessories T wo R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) Power cord * For U.S., Canada, etc. (6' (1.8 m)) 9NK3090204900 For Europe, except U.K. (6' (1.8 m)) 9NK3090152700 * Use the power cord that corresponds to the wall outlet in your country . (1) (2) Remote mouse receiver (5'3" (1.6 m)) 9NK3790199300 Cap f[...]

12 Accessories ■ Lens Projection distance for 100" screen size Fixed wide lens ( × 0.8) AH-45201 5'4" (1.6 m) Wide-zoom lens ( × 1.5 – 1.8) AH-45301 10' – 12' (3.0 m – 3.7 m) Standard zoom lens ( × 1.8 – 2.2) AH-51401 12' – 14'8" (3.7 m – 4.5 m) (Standard equipment with EIP-5000) T ele-zoom l[...]

13 37 45 70 40 40 73 39 41 56 39 56 56 56 46 17 45 14 14 · 94 14 · 94 14 · 94 97 93 ENTER button F or setting items selected or adjusted on the menu. KEYSTONE button For entering the Keystone Correction mode. Carrying handle For carrying the projector. STANDBY-ON button For turning the power on or putting the projector into standby mode. Adjustm[...]

14 About the Indicators on the Projector Power indicator Green on ... Normal (Standby) Red on ... Normal (Power on) Green blinks ... The intake vent cover is open. (See page 93 .) Temperature warning indicator Off ... Normal Red blinks/on ... The internal temperature is abnormally high. (See pages 94 and 95 .) Lamp indicators 1, 2 Green on ... Norm[...]

15 Projector (Side View) Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector . Numbers in refer to the main pages in this owner ’s m anual where th[...]

16 Note • All the buttons on the remote control, except the mouse/adjustment button and the ADJ./MOUSE switch, are made of luminous material that is visible in the dark. Visibility will diminish over time. Exposure to light will recharge the luminous buttons. Remote Control 40 18 56 39 40 45 70 18 48 37 47 19 41 46 50 46 46 50 47 ST ANDBY-ON butt[...]

17 Using the Remote Control Inserting the Batteries 1 Press the tab and lift open the battery cover in the direction of the arrow . 2 Insert the batteries. • Insert the batteries making sure the po- larities correctly match the and marks inside the battery compartment. 3 Insert the tabs on the end of the battery cover into their slots and press t[...]

18 Using the Remote Control Using the Remote Control with a Signal Cable When the signals from the remote control cannot be reached due to the positioning of the projector , use a ø3.5 mm minijack cable to connect the remote control to the projector . Now you can control the projector with the remote control. Note • The wireless remote function [...]

19 Using the Remote Control as a Wireless Computer Mouse When connecting the supplied remote mouse receiver to the computer , you can use the remote control as the wireless computer mouse. 1 Connect the supplied remote mouse receiver to the USB termi- nal on the computer . 2 Slide the ADJ./MOUSE switch on the remote con- trol to the MOUSE position.[...]

20 Quick Start Page 22 1. Place the pr ojector facing a screen Pages 27–29, 37 Page 37 Press on the projector or on the remote control. This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the [...]

21 Pages 38, 39 4. Adjust the angle 5. Adjust the focus and the zoom Page 40 8. T urn the power off 7. Select the input mode 1 1 1 1 1 Press on the projector or on the remote control to adjust the focus. 2 2 2 2 2 Press on the projector or on the remote control to adjust the zoom. Press on the projector or on the remote control to select the “INP[...]

22 Setting Up the Projector For optimal image quality , position the projector perpendicular to the screen with the projector ’ s feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality . Note • The projector lens should be centered in the middle of the screen. If the horizontal line pass[...]

23 Projecting a Reversed Image Projection from behind the Screen ■ Place a translucent screen between the projector and the audience. ■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 84 .) Projection Using a Mirror ■ Place a mirror (normal flat type) in front of the lens. ■ When the translucent screen is place[...]

24 INPUT/OUTPUT Terminals and Connectable Main Equipment AUDIO input (2, 3) terminal Connecting an audio cable . (Shared audio input terminal for INPUT 2 and 3.) (See pages 28 and 29 .) AUDIO input (1) terminal Connecting an audio cable . (Audio input terminal dedicated to INPUT 1.) (See page 27 .) AUDIO input (4, 5) terminals Connecting an audio c[...]

25 T erminal on the projector INPUT 1 INPUT 2 INPUT 3 AUDIO (for INPUT 1) AUDIO (for INPUT 2, 3) INPUT 3 INPUT 2 INPUT 2 Equipment Computer Audio-visual equipment T erminal on connected equipment RGB output terminal DVI digital video output terminal Audio output terminal HDMI output terminal DVI digital video output terminal RGB output terminal Com[...]

26 T erminal on the projector INPUT 4 INPUT 5 AUDIO (for INPUT 1) AUDIO (for INPUT 2, 3) AUDIO (for INPUT 4, 5) OUTPUT AUDIO OUTPUT Equipment Audio-visual equipment Monitor Amplifier T erminal on connected equipment Video output terminal S-video output terminal Audio output terminal RGB input terminal Audio input terminal Cable Video cable (commerc[...]

27 Connecting to a Computer Before connecting, ensure that the power cord of the projector from the AC outlet is un- plugged, and that the devices to be connected are turned off. After making all connections, turn on the projector and then the other devices. When connecting a computer , ensure that it is the last device to be turned on after all th[...]

28 Connecting with a 5 BNC to 15-pin D-sub Cable The projector employs a 5 BNC computer input to prevent deterioration of image quality . When connecting the input terminals on the projector to the computer directly , Connect the R (P R ), G/G sync (Y), B (P B ), HD/C sync and VD cables of the 5 BNC to 15-pin D-sub cable (commercially available) to[...]

29 Connecting with a DVI Digital Cable The projector employs the DVI digital input terminal for direct input of digital video signals from a computer . Note • When connecting the projector to a computer in this way , select “D. PC RGB” for “Signal T ype” in the “Picture” menu. • When using the ø3.5 mm mono audio cable, the volume l[...]

30 Connecting to V ideo Equipment Before connecting, ensure the power cord of the projector from the AC outlet is unplugged, and that the devices to be connected are turned off. After making all connections, turn on the projector and then the other devices. The projector has a DVD digital terminal, computer -RGB/ component terminal, S- video termi-[...]

31 Connecting to Video Equipment That Has a DVI Output Terminal with a DVI Digital Cable Use a DVI Digital cable when connecting video equipment with the DVI output terminal such as DVD players to the INPUT 3 terminal. Note • Select the input signal type of the video equipment. See page 63 . To INPUT 3 terminal DVI Digital cable (commercially ava[...]

32 Connecting to RGB Video Equipment with a 5 RCA RGB Cable Use a 5 RCA RGB cable when connecting the RGB video equipment such as DVD players and DTV* decoders to the INPUT 2 terminals. * DTV is the umbrella term used to describe the new digital television system in the United States. Note • When connecting the projector to the video equipment in[...]

33 Connecting to Video Equipment That Has Component Output Terminals When connecting the video equipment that has component output terminals to the INPUT 2 terminals, use the BNC to RCA adaptors (commercially available). Note • ø3.5 mm stereo minijack to RCA audio cable (commercially available) is required for audio input. • Select “480P/525[...]

34 Connecting with an S-video Cable or a Composite Video Cable Connect the video equipment to the INPUT 4 or 5 terminal using the S-video cable or com- posite video cable (commercially available). Note • The S-video signal input to the S-VIDEO terminal is separated into color and luminance signals for real- izing a higher-quality image. • An RC[...]

35 Controlling the Projector by a Computer When the RS-232C terminal on the projector to the RS-232C serial terminal on the computer , or when the LAN terminal on the projector to the LAN terminal on the computer , the com- puter can be used to control the projector . Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for details. Whe[...]

36 Connecting to a Monitor That Has an RGB Input T erminal Y ou can display computer images on a monitor using the RGB cables. Note • RGB signals and component signals input from the INPUT 1 or INPUT 2 terminals can be output to the monitor . • For inputting video signals from the INPUT 1 terminal, another RGB cable (commercially available) is [...]

37 T urning the Projector On/Off Info • If “Direct Power On” is set to “ON”, the pr ojector will be turned on automatically when you plug the power cord into the AC outlet. (See page 87 .) • English is the factory preset language. If you want to change the on-screen display to another language, change the language according to the pr oc[...]

38 Image Projection Shifting the Lens In addition to the zoom function and adjustment of projection angle using the adjust- ment feet, you can adjust the position of the projection using the lens shift function. This is a useful function in cases such as when the screen cannot be moved. Adjustable range The adjustable range is shown below . Horizon[...]

39 Using the Adjustment Feet • When the position of the projected image cannot be adjusted with the lens shift function, use the adjustment feet to adjust the projected angle. • The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector , the screen is inclined or when the installa[...]

40 Note • After you have pressed the FOCUS but- tons or the ZOOM buttons on the remote control or the projector , you can display the test pattern by pressing the ENTER but- ton. The test pattern is useful for making more accurate adjustments. • For fine adjustments, when pressing the H & V LENS SHIFT buttons, the FOCUS buttons or the ZOOM [...]

41 ENTER button KEYST ONE button UNDO button Adjustment button ( ' / " / / | ) Mouse/adjustment button ( ' / " / / | ) ENTER button UNDO button KEYST ONE button For correcting an image desig- nating the corner of the pro- jected image. For correcting an image desig- nating the horizontal or vertical axes. For correcting the [...]

42 Geometric Adjustment Upper Left Upper Right Lo wer Right Low er Left GEOMETRIC ADJUSTMENT 1 Press on the projector or on the remote control re- peatedly until “GEOMETRIC ADJUSTMENT” is displayed. 2 Press the buttons below to ad- just the position, size or focus of the projected image. • Match screen’ s four sides to green test pattern. ?[...]

43 V ertical Keystone Correction (Adjustment with ' / " ) H & V KEYSTONE 1 Press on the projector or on the remote control re- peatedly until “H & V KEY - STONE” is displayed. • When the correction has already been made with “GEOMETRIC ADJUST - MENT”, the confirmation message for resetting the correction before “H &[...]

44 Image Projection IMAGE RESIZING (Adjustment with ' / " / / | ) 5 Press ' , " , or | to correct the image distortion. 6 Press or to set the posi- tion.[...]

45 Switching the Input Mode Select the appropriate input mode for the con- nected equipment. Press , , , or on the remote control to select the input mode. • • • • • When pressing on the projector , the input mode switches in order of : INPUT 1 INPUT 2 INPUT 3 • • • • • When pressing on the projector , the input mode switches be[...]

46 " On-screen Display V olume buttons × 1 × 4 × 9 × 16 × 36 × 64 × 2 × 3 " On-screen Display Adjusting the Volume Press / | | | | | on the projector or on the remote control to adjust the volume. Note • Pressing or will lower the volume. Pressing or | will raise the volume. Turning Off the Sound Temporarily Press on[...]

47 Freezing a Moving Image 1 Press on the remote control. • The projected image is frozen. 2 Press again to return to the moving image from the currently connected equipment. Selecting the Picture Mode Y ou can select the suitable picture mode for the projected image, such as movie or video game. Press on the remote control. • When pressing , t[...]

48 Resize Mode Press on the remote control. • Pressing changes the display as shown. • T o return to the standard image, press while “ RESIZE ” is displayed on the screen. • This function can also be accessed from the OSD menu (see page 74 ). This function allows you to modify or customize the resize mode to enhance the input image. Depen[...]

49 VIDEO Input signal Image type NORMAL FULL DTV/video 480 I , 480P , 576 I , 576P , NTSC, P AL, SECAM 720P , 1035 I , 1080 I 540P 4:3 aspect ratio 4:3 aspect ratio BORDER STRETCH SMART STRETCH Letter box Squeeze 16:9 aspect ratio Select “Stretch” Select “Stretch” Select “Full” Select “Full” 4:3 aspect ratio in 16:9 16:9 aspect rati[...]

50 Displaying the Black Screen This function allows you to tempo- rarily display the black screen. 1 Press . 2 Pressing again will turn the projected image back on. Displaying and Setting the Break Timer This function allows you to show the re- maining time for break during meeting. 1 Press . 2 While “ ” is displayed, press ' , " , [...]

51 Menu Items The following shows the items that can be set in the projector . “Picture” menu INPUT 1 / INPUT 2 / INPUT 3 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +10 0 Signal Type Auto RGB Component INPUT 1/INPUT 2 D.PC RGB D.PC Comp. D.Video RGB D.Video Comp. INPUT 3 Tint Color Reset Bright +30 -30 Contrast Red Green Bright Boost Progressive P[...]

52 Menu Items INPUT 4 / INPUT 5 +30 -30 +30 -30 +30 -30 +30 -30 +30 -30 +10 0 Tint Color Reset Bright +30 -30 Contrast Red Green Bright Boost Progressive Picture 4500K 10500K Main Menu Sub Menu CLR Temp Page 60 Page 61 Page 60 Page 60 Page 61 Page 62 Page 60 Picture Mode Standard Presentation Cinema Custom 2D Progressive 3D Progressive Film Mode Pa[...]

53 “Fine Sync” menu *6 The “Fine Sync” menu is displayed only while the input mode is INPUT 1, INPUT 2 or INPUT 3. *7 “Clock”, “Phase”, “H-Pos”, “V -Pos”, “Reset”, “Save Setting”, “Select Setting” and “Special Modes” can be ad- justed only while the input mode is INPUT 1 or INPUT 2. Fine Sync +30 -30 +60 -60 [...]

54 Menu Items “Options (1)” menu “Audio” menu +30 -30 +30 -30 +30 -30 Speaker [ON/OFF] Bass Treble +30 -30 Balance Reset Audio Out Audio Main Menu Page 72 Page 72 Page 72 Page 73 FAO VAO Sub Menu INPUT 4 / INPUT 5 INPUT 1 / INPUT 2 / INPUT 3 Pict in Pict Options (1) Main Menu Sub Menu OSD Display Auto PAL (50/60Hz) SECAM NTSC4.43 NTSC3.58 P[...]

55 “Language” menu “Status” menu Main Menu Sub Menu English Deutsch Español Nederlands Français Italiano Svenska Português Language Page 92 Status Main menu Page 92 “Options (2)” menu LAN/RS232C Monitor Out RS-232C Options (2) Enable Disable INPUT 1 [ON/OFF] INPUT 2 [ON/OFF] INPUT 3 [ON/OFF] INPUT 4 [ON/OFF] INPUT 5 [ON/OFF] 9600 bps[...]

56 Menu items The menu can be operated to achieve two functions, adjustments and settings. (For setting the menu items, see pages 58 and 59 . ) Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright” • This operation can also be performed by using the buttons on the projector . ENTER button MENU button UNDO button Mous[...]

57 3 Press ' ' ' ' ' or " " " " " to select the item you want to adjust. • Pressing displays the items on the lower part of the “Picture” menu. To adjust the pro- jected image while viewing it Press . • The selected single adjustment item (e.g. “Bright”) appears instead of the menu. • [...]

58 Menu items Menu Selections (Settings) Example: Setting “OSD Display” • This operation can also be performed by using the buttons on the projector . 1 Press . • The “Picture” menu screen for the se- lected input mode is displayed. 2 Press or | | | | | to display the other menu items. • There are eight menu items as shown b[...]

59 3 Press ' ' ' ' ' or " " " " " to select the item you want to set. Note • Press to return to the previous screen. • In some menu, select the icon using . 4 Press | | | | | to shift the cursor to the sub menu. 5 Press ' ' ' ' ' or " " " " " to [...]

60 Y ou can adjust the projector ’ s picture to your preferences using the “Picture” menu. Picture Adjustment (“Picture” menu) Selecting the Picture Mode This function allows you to select the picture mode in accordance with brightness of the room or content of the image to be projected. In all picture modes, items on the “Picture” me[...]

61 Adjusting the Color Temperature Menu operation Page 56 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Color T emperature Settings Note • “CLR T emp” cannot be set when “C.M.S. Ad- justment” on the “C.M.S.” menu is set to “sRGB”. (See page 64 .) Selectable items 4500K 10500K Description For lower colo[...]

62 Selecting the Progressive Mode Menu operation Page 58 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Progressive * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can con- vert this film source to progressive video at 60 frames/sec- ond with NTSC and P AL[...]

63 Signal Type Setting This function allows you to select the input sig- nal type RGB or component for INPUT 1, INPUT 2 or INPUT 3. Menu operation Page 58 Example: “Picture” screen menu for IN- PUT 1 (RGB) mode Description of Signal T ype Settings INPUT 1/INPUT 2 Description Input signals are automatically recog- nized as RGB or component. Set [...]

64 Color Management System (“ C. M. S. ” menu) This function allows you to individually adjust the display characteristics of six colors (R: Red, Y : Y ellow , G: Green, C: Cyan, B: Blue, M: Magenta). Selecting the Color Repro- duction Mode This function allows you to select the color re- production mode for the projected images. Menu operation[...]

65 For more chromatic value of the target color For less chromatic value of the target color For more brightness of the target color For less brightness of the target color Setting the Brightness of the Target Color This function allows you to set the brightness of the selected target color . Menu operation Page 56 Example: “C.M.S.” screen menu[...]

66 For stronger yellow of the target color For stronger red of the target color Setting the Hue of the Target Color This function allows you to set the hue of the selected target color . Menu operation Page 56 Example: “C.M.S.” screen menu Description of Hue Press Press | Resetting User-defined Color Settings This function allows you to reset[...]

67 Overview of All Color Set- tings This function allows you to confirm the settings of all the colors. Menu operation Page 56 Example: “C.M.S.” screen menu[...]

68 Y ou can adjust the computer image, match the computer display mode, and confirm the input signal using the “Fine Sync” menu. Computer Image Adjustment (“Fine Sync” menu) Adjusting the Computer Image Use the Fine Sync function in case of irregulari- ties such as vertical stripes or flickering in por- tions of the screen. Menu operation P[...]

69 Special Mode Setting Ordinarily , the type of input signal is detected and the correct resolution mode is automatically se- lected. However , for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to match the computer display mode. Menu operation Page 58 Example: “Fine Sync” [...]

70 Auto Sync Adjustment Used to automatically adjust a computer image. Menu operation Page 58 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of Auto Sync Adjustment Note • Auto Sync adjustment is also performed by pressing on the projector or on the remote control. • The Auto Sync adjustment may take some time to comple[...]

71 Auto Sync Display Function Used to set the display during Auto Sync. Menu operation Page 56 Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode Description of Auto Sync Display Description The image set as a background image is projected. See page 77 . The computer image being adjusted is displayed. Selectable items —[...]

72 Y ou can adjust the projector ’ s audio to your preferences using the “Audio” menu. Audio Adjustment (“Audio” menu) Adjusting the Audio This function allows you to adjust the projector ’ s audio. Menu operation Page 56 Example: “Audio” screen menu Description of Adjustment Items Selectable items Press Press | Note • T o reset[...]

73 Speaker Setting This function allows you to turn the audio out- put of the internal speaker on or off when the projector is connected to an external amplifier . Menu operation Page 56 Example: “Audio” screen menu Description of Speaker Settings Selectable items ON OFF Description The audio signal is output from the internal speaker . The aud[...]

74 Using the “Options (1)” Menu Y ou can use the “Options (1)” menu to enhance the usage for the projector . Displaying Dual Pictures ( Pict in Pict ) The Pict in Pict (picture in picture) function allows you to display two pictures on the same screen. Y ou can display the image input from INPUT 4 or 5 as an inset picture over- lapping the [...]

75 Shifting the Projected Im- age Vertically (Digital Shift) For easier viewing, this function shifts the im- age projected on the screen up or down elimi- nating either the upper or lower black band found in 16:9 and other wide aspect ratios. Menu operation Page 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Digita[...]

76 Using the “Options (1)” Menu Setting the Video System The video input system mode is factory preset to “Auto”; however , a clear picture from the con- nected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal. Menu operation Page 58 Example: “Options (1)” scre[...]

77 Selecting the Background Image Menu operation Page 58 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Background Images Note • Y ou can set a captured image as a background image by selecting “Custom”. • When “Custom” is selected, an image saved us- ing “Image Capture” can be displayed as a back- grou[...]

78 Using the “Options (1)” Menu Eco Mode Menu operation Page 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Eco Mode * This is a reference value and is not guaranteed. Note • When “Eco Mode” is set to “ON”, the power con- sumption will decrease and the lamp life will extend. (Projection brightness decr[...]

79 Auto Power Off Function Menu operation Page 56 Example: “Options (1)” screen menu for INPUT 1 (RGB) mode Description of Auto Power Off Note • When “Auto Power Off” is set to “ ON”, 5 min- utes before the projector enters the standby mode, the message “Enter ST ANDBY mode in X min.” will appear on the screen to indicate the rema[...]

80 Using the “Options (1)” Menu Note • If you input a wrong keycode, the cursor returns to the first point of the “Old Code”. • The preset keycode is 4 " buttons on the projec- tor . If this keycode is set, the keycode input screen does not appear when turning the power on. 3 Press the 4 buttons on the remote control or on the proj[...]

81 When the system lock is set If you have set the system lock, enter the keycode and follow the procedure below to release the system lock. ▼ Input screen for keycode Note • When System Lock is set, the keycode input screen appears after the power is turned on. • If no keycode is entered, the image will not be displayed, even if the projecto[...]

82 Helpful Functions Set during Installation (“Options (2) ” menu) Setting a Password • • • • • There is no factory preset for the password, so the “Options (2)” menu is enabled. • • • • • If you do not want others to operate the “Op- tions (2)” menu, set a password. Menu operation Page 58 Example: “Options (2)” [...]

83 Checking the Lamp Life Status Y ou can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Menu operation Page 56 Example: “Options (2)” screen menu Description of Lamp Timer (Life) * This is a reference value and is not guaranteed. Note • It is recommended that the lamp be changed when the remaining lamp life [...]

84 Reversing/Inverting Pro- jected Images This projector is equipped with a reverse/invert image function that allows you to reverse or in- vert the projected image for various applications. Menu operation Page 58 Example: “Options (2)” screen menu Description of PRJ Modes Note • This function is used for the reversed image and ceiling-mount [...]

85 Master Slave IP Address 192.168.150.2 192.168.150.3 Subnet Mask 255.255.255.0 255.255.255.0 DHCP Client OFF OFF Gateway 0.0.0.0 0.0.0.0 User Name (Reset) (Reset) Password (Reset) (Reset) Data Port 10002 10002 Shortcut to Make Projector Stack Settings Normally , settings via web browser are required for the stack projection. Y ou can skip the set[...]

86 Helpful Functions Set during Installation (“Options (2)” menu) Bypassing Unused Input Selections This function allows you to skip the input mode that you rarely use. Y ou can skip the input modes when pressing INPUT 1, 2, 3 button or INPUT 4, 5 button on the projector . Menu operation Page 58 Example: “Options (2)” screen menu Descriptio[...]

87 Selecting the Transmis- sion Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Menu operation Page 58 Example: “Options (2)” screen menu Description of RS-232C Note • Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for RS-232C Specifica- tions and Command Settings. • Refer to [...]

88 Monitor Output Settings When the Monitor Out has been set to “Enable”, the monitor output is activated and power is con- sumed even in the standby mode. It is recom- mended that the Monitor Out be set to “Disable” when it is not connected. This reduces power consumption when the projector is in the standby mode. Menu operation Page 58 Ex[...]

89 DHCP Client Setting Connect the LAN cable before turning the pro- jector on. If not, the DHCP Client function does not work. Menu operation Page 58 Example: “Options (2)” screen menu Description of DHCP Client Note • Select “ON” for “DHCP Client”. “Obtaining IP Address...” appears, then the message “The network settings have [...]

90 Description Factory default setting: 192.168.150.002 Enter an IP address appropriate for the network. Factory default setting: 255.255.255.000 Set the subnet mask to the same as that of the computer and equipment on the network. Factory default setting: 000. 000. 000. 000 * When not in use, set to: “000. 000. 000. 000”. Selectable items IP A[...]

91 Returning to the Default Settings This function allows you to initialize the settings you have made in the projector . Menu operation Page 56 Example: “Options (2)” screen menu Note About the network settings • “IP Address”, “Subnet Mask”, “Gateway” and other network setting items are initialized. The following items or menu ca[...]

92 Selecting the On-screen Display Language The projector can switch the on-screen display language among 1 1 languages: English, German, Spanish, Dutch, French, Italian, Swedish, Portu- guese, Chinese, Korean or Japanese. Menu operation Page 58 Example: “Language” screen menu Using the Other Menus (“Language” and “Status” menus) Overvi[...]

93 Cleaning the air vents and the intake vent cover ■ Use a vacuum cleaner to clean dust from the ex- haust vent, the intake vents and the intake vent cover (on the bottom of the projector). Info • If you want to clean the air vents and the intake vent cover during projector operation, ensure you press on the projector or on the remote control [...]

94 P ower indicator Lamp indicators 1, 2 T emperature warning indicator Maintenance Indicators Maintenance Indicators ■ The warning lights on the projector indicate problems inside the projector . ■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter the standby m[...]

95 Maintenance indicator Problem Cause Possible solution T emperature warning indicator Normal Abnormal Off Red on (Standby) The internal temperature is abnormally high. Abnormal • Blocked air intake • Relocate the projector to an area with proper ventilation. (See page 9 .) • Cooling fan break- down • Internal circuit failure • Clogged a[...]

96 Lamp ■ It is recommended that the lamp units (optional: A H-50001 and A H-50002) be replaced when the re- maining lamp life becomes 5% or less, or when you notice a significant deterioration in the picture and color quality . The lamp life (percentage) can be checked with the on-screen display . See page 83 . ■ Purchase a replacement lamp un[...]

97 Optional accessories Lamp unit 1 AH-50001 Removing and Installing the Lamp Unit Info • Make sure that you remove the lamp unit by the handle. Do not touch the glass sur- face of the lamp unit or the inside of the projector . • T o avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below . • Do not loo[...]

98 4 Remove the lamp unit. • Loosen the securing screws (two for each lamp) from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow . At this time, keep the lamp unit horizontal and do not tilt it. 5 Insert the new lamp unit. • Press the lamp unit firmly into the lamp unit compartment. Fasten the securing [...]

99 T o AC soc ket P ower cor d ENTER button MENU button H&V LENS SHIFT button ST ANDBY-ON button Resetting the Lamp Timer Reset the lamp timer after replacing the lamp. Info • Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp to become damaged[...]

100 Computer Compatibility Chart • Multiple signal support Horizontal Frequency: 15–126 kHz V ertical Frequency: 43–200 Hz Pixel Clock: 12–230 MHz Sync signal: Compatible with TTL level Computer PC/ MAC/ WS Horizontal Frequency (kHz) Vertical Frequency (Hz) PC 1,152 864 1,280 720 1,280 768 1,280 800 1,360 768 1,366 768 1,152 882 1,280 1,024[...]

101 Note • Depending on the notebook computer , the image cannot be displayed or noise may appear in simulta- neous (CRT/LCD) mode. In this case, turn of f the LCD display on the notebook computer . For more details, refer to the owner ’s manual of the notebook computer . • When this projector receives 640 × 350 VESA format VGA signals, “6[...]

102 T roubleshooting Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is wrong. • Cables incorrectly connected to side panel of the projector . • Remote control batteries have run out. • External output has not been set when connecting notebook [...]

103 Check Problem Page All buttons on the projector and the remote control are unavailable. Picture is green on INPUT 1or 2 (COMPONENT). Picture is pink (no green) on INPUT 1, 2 or 3 (RGB). Picture is too bright and whitish. The cooling fan becomes noisy . The lamp does not light up even after the projector turns on. The lamp suddenly turns off dur[...]

104 Specifications DLP ® Projector EIP-5000/EIP-5000L NTSC3.58/NTSC4.43/P AL/P AL-M/P AL-N/P AL-60/SECAM/ DTV480 I /DTV480P/DTV540P/DTV576 I /DTV576P/DTV720P/DTV1035 I /DTV1080 I 0.7" DLP ® chip × 1 No. of dots: 786,432 dots (1,024 [H] × 768 [V]) 1.2 × electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard equipment with EIP-[...]

105 Glossary Advanced intelligent compression (Page 100) High quality resizing of lower and higher resolu- tion images to fit the projector ’s native resolution. Aspect ratio (Page 48) Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect ratio of 16:9 and 21:9.[...]

106 Index AC socket ...................................................................... 37 ADJ./MOUSE switch ..................................................... 18 Adjustment buttons ........................................................ 56 Adjustment feet .............................................................. 39 Advanced intelligent[...]

U .S.A. EIKI Inter national, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U .S.A. T el : 800-242-3454 (949)-457-0200 F ax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com Japan & W orldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho , Kita-Ku, Osaka, 530-0028 Japan T el : +81-6-6311-9479 F ax : +81-6-6311-8486 W orldWide W[...]