Deutsch dropdown-ico

Emerson RTM-ATCA-7150 Bedienungsanleitung

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122

Zur Seite of

Ähnliche Gebrauchsanleitungen

Richtige Gebrauchsanleitung

Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Emerson RTM-ATCA-7150 an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Emerson RTM-ATCA-7150, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.

Was ist eine Gebrauchsanleitung?

Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Emerson RTM-ATCA-7150 die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.

Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Emerson RTM-ATCA-7150. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.

Was sollte also eine ideale Gebrauchsanleitung beinhalten?

Die Gebrauchsanleitung Emerson RTM-ATCA-7150 sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Emerson RTM-ATCA-7150
- Den Namen des Produzenten und das Produktionsjahr des Geräts Emerson RTM-ATCA-7150
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Emerson RTM-ATCA-7150
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen

Warum lesen wir keine Gebrauchsanleitungen?

Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Emerson RTM-ATCA-7150 zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Emerson RTM-ATCA-7150 und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Emerson finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Emerson RTM-ATCA-7150 zu überspringen, wie es bei der Papierform passiert.

Warum sollte man Gebrauchsanleitungen lesen?

In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Emerson RTM-ATCA-7150, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.

Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Emerson RTM-ATCA-7150 widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.

Inhaltsverzeichnis der Gebrauchsanleitungen

  • Seite 1

    Embedded Computing f or Busines s-Critical Continuity TM ATCA-7150 and RTM-ATCA-7150 Getting S tar ted Documen t: 6806800G42B Dece mber 2008[...]

  • Seite 2

    © 2008 Emerson All rights reserved. T radem arks Emerson, Busines s-Critical Continuity, Eme rson Network Power and the Emerson Network Powe r logo are tradem arks and service marks of Eme rson Electric Co. © 2008 Eme rson Electr ic Co. All other product or service names are the prope r t y of thei r respective owners. Intel ® is a trademark or [...]

  • Seite 3

    Contents ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 4

    ATCA-715 0 and RTM-ATCA-71 50 Getting Starte d (6806800G42B) Contents 4 Contents Contents 2.6.4.2 Installin g the FC Daughter Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 2.6.4.3 Replacing the FC Dau ghter Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 2.7 Installing and [...]

  • Seite 5

    Contents ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) 5 3.7.1.3 Power-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 3.7.2 Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 6

    ATCA-715 0 and RTM-ATCA-71 50 Getting Starte d (6806800G42B) Contents 6 Contents Contents A.15 ACPI Code Checkpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 B Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

  • Seite 7

    List of T abl es ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 7 T able 1-1 F unc tions of the A T CA -7150 and the RTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 T able 1-2 S tandar d Compli ance s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

  • Seite 8

    ATCA-7150 and RTM-A TCA-7150 Getting Started ( 6806800G42B) 8 List of Tables[...]

  • Seite 9

    List of Figures ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 9 Figure 1-1 Connection Bet ween the A T CA -7150 and the RTM . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Figure 2-1 W earing the ESD -Preven tive W rist Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Figure 2-2 R emoving the Fill[...]

  • Seite 10

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) 10 List of Figures[...]

  • Seite 11

    ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 11 About this Manual Overview of Contents This documen t describes the A T C A-7150 and RTM- A T CA -7150 server suite (he reina f ter ref erred to as the A T CA -7150 and RTM-A T C A -7150 suite) in the f ollowing as pects: z F unctions, fea t ures, and appe arance of th e A T C A-7150 a[...]

  • Seite 12

    ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) About this Manual 12 About this Manual Abbreviations This docume nt use s the follo wing abbrevi ations: Abbre via tion Definiti on ACA Australian Communica tions Authorit y BIOS Basic Input/Output System BMC Baseboard Management Contr oller CMOS Compleme ntar y Metal Oxide Semiconductor [...]

  • Seite 13

    About this Manual ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 13 Conv entions The following table describes the conv entions used throughout this manual. RTM Rear T ra ns it ion Mo du l e SAS Serial Attached Sm al l Computer Syste m Inte r face SCSI Small C omputer Syste m Interfac e SDR Sensor Data R ecord SEL System E vent Log Sh[...]

  • Seite 14

    ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) About this Manual 14 About this Manual Summar y of Changes This manual h as bee n revised and repl aces all prior editions. ... Re peated ite m for example node 1, node 2, ..., node 12 . . . Omission of information from example/command tha t is not n ece ssary at the time be ing .. Ranges[...]

  • Seite 15

    About this Manual ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 15 Comments and Suggestions W e welcome and apprecia te your commen ts on our docu mentation. W e want to know what you think about our manuals and how we can make them better . Mail commen ts to us by filling out the following onl ine form: http ://www .emersonnetworkpo[...]

  • Seite 16

    ATCA-715 0 and RTM-ATCA-715 0 Getting Starte d (6806800G42B) About this Manual 16 About this Manual[...]

  • Seite 17

    ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 17 Sa fet y N otes This section provide s warning s that prec ede pot enti ally dangerou s procedures t hroughout this manu al. Instructions contained in the warning s must be follo wed during all pha ses of operation, serv ice , and repair o f this equipment. Y ou should also employ all [...]

  • Seite 18

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Safety Notes 18 Opera tion of this equipme nt in a re siden tial ar ea is li ke ly to caus e harmful inte r fere nce in which case the u ser will be required to c orrec t the inte r fe renc e at his own expense . Changes or modifications no t expressly appro ved by Eme r son Network Powe r [...]

  • Seite 19

    Safety Notes ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 19 Installation Dam age of the Product and Additional Device s and Modules Incorrect i nstallation or removal of additional devices or modules may d amage the produc t or the additional de vices or modules. Bef ore installing or removing ad ditional devic es or modules, read [...]

  • Seite 20

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Safety Notes 20 Emerson Net work Powe r Embedded Computing (E NPEC) and our supp liers take significant ste ps to e nsure there are no ben t pins on the backplane or connector d amage t o the boar ds prior to le aving the fac tor y . Ben t pins caus ed by imprope r installati on or by inse [...]

  • Seite 21

    Safety Notes ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 21 Battery Board/Syste m dama ge Incorr ect exch ange of lithium ba tteries can re sult in a hazar dous explosion. When ex changing the on-board lithiu m batte r y , mak e sure that the new and the old ba tte r y are exactly the same batt ery models. If the respective batt er[...]

  • Seite 22

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Safety Notes 22[...]

  • Seite 23

    ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 23 Sicherheitshinw eise Dieses K apite l enthält Hinwe ise, die pote ntiell ge fährliche n Prozedure n innerhalb dies es Handbuchs v orrangeste llt sind. Be achte n Sie unbedingt in alle n Phase n des Be trieb s, de r W ar tung und de r Re paratur des Syste ms die Anweisunge n, die dies[...]

  • Seite 24

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Sicherheitshinweise 24 EMV Da s Produkt wurde in e inem Emerson Network Powe r Stand ardsyst em get este t. Es er füllt die für digitale Ge räte der Kl asse A gültige n Grenzwerte in eine m solchen Syst em gemäß de n FCC - Richtlinie n Abschnitt 15 bzw. EN 55022 Klas se A. Diese Grenz[...]

  • Seite 25

    Sicherheitshinweise ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 25 Überhitzung und Be schädigung des Produkte s Betre iben Sie das Pro dukt ohne Zwangs belüftung, kann da s Produkt überhitzt und sc hließlich beschädigt w erde n. Bevor Sie d as Produkt be treibe n, müssen Sie sic her ste llen, da ss da s Shelf über e ine Zwa[...]

  • Seite 26

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Sicherheitshinweise 26 Beschädi gung des Produkte s, der Backplane ode r von Syst em K omponente n V erbogen e Pins oder lose K omponent en könne n zu e iner Be schädigung de s Produktes, de r Bac k pla ne od er von S yst emko mpo n enten f üh ren . Überprüf en Sie dahe r das Produkt [...]

  • Seite 27

    Sicherheitshinweise ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 27 Umw eltsc hutz Entsor gen Sie alte Batt erien und Blad es/RTM s stets ge mäß der in Ihrem Land gültigen Gesetzgebung und de n Empfehlungen de s Herstelle rs. Batterie Beschädi gung des Produkte s Ein unsachge mäßer Einbau de r Batter ie kann gef ährliche Expl[...]

  • Seite 28

    ATCA-7150 and RTM-ATCA-7150 Getting Started ( 6806800G42B) Sicherheitshinweise 28[...]

  • Seite 29

    Chapter: 1 ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 29 Introduc tion 1.1 F eatures The A T C A-7150 and RT M -A T C A-7150 ser ver bl ade suite fe atures the cap abilities o f high speed calculation and mass da ta processing. The A T C A-7150 and RTM- A T CA -7150 suite c onsists of: z A T CA -7150 and RT M -A T C A-7150 z RTM-A[...]

  • Seite 30

    Introduction ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 30 Figure 1 -1 shows the connection bet ween the A T C A-7150 and the RTM of the ser ve r blade . Figure 1-1 Conn ection Bet ween th e A T C A-7150 and the RTM RTM of th e server blade Backplane ATCA- 7150 Y ou can c hoose to use the R TM -A T C A -7150 accor ding to the actu[...]

  • Seite 31

    Introduction ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 31 T able 1-1 lists the func tions of the A T CA -7150 and the RTM. T able 1-1 Fun ctions of the A T C A-7150 and the R TM Function Description Processing functio ns z Suppor ts t wo dual-core L V In tel X eon 5138 ( 2.13 GHz) processor s z Suppor ts 4 MB L2 c ache z Supp or [...]

  • Seite 32

    Introduction ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 32 1.2 Standard C ompliances This product meets the follo wing standards. 1.3 Ordering Information When or dering boar d varian ts or board acces sories, use the orde r numbers give n on the following p ages. T able 1-2 Stan dard Com plianc es Stan dard Desc ript ion UL 60950[...]

  • Seite 33

    Introduction ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 33 1.3.1 Suppor ted Board Models The following table expl ains the produc t nomenc l ature used f or the available board vari ants. 1.3.2 Board Acce ssories As of the printing date of this m anual, the f o llowing board acc essories wer e available . T able 1-3 Produc t Nomen[...]

  • Seite 34

    Introduction ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 34 A T C A7X50-HDDx-SAS/SA T A A T C A7X50-HDD1-SAS A T C A7X50-HDD2-SAS A T C A7X50-HDD3-SA T A ATC A 7 X 5 0 T able 1-4 Available Boar d Access ories (c ontinued) Board A cce sories Order Numbe r[...]

  • Seite 35

    Chapter: 2 ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 35 Installation of th e RTM -A T C A -7150 2.1 Ov er view This chap ter describes : z Unpacking and inspecting RTM- A T C A-7150 z Precautions during the operation z Prep arations bef o re install ation z Installation procedure z Installing and repl acing daughte r cards z Conn[...]

  • Seite 36

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 36 3. Re move the desiccan t bag shipped together with the blade and dispose o f it accor ding to y our coun tr y ’s legislation. 2.3 Environmental and P ower R equirements The following en vironmental and power requireme nts are applicable to the board[...]

  • Seite 37

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 37 2.3.2 Po wer Requirements Vibration 1.0g from 5 to 1 00 Hz and back to 5 Hz a t a ra te of 0.1 oct ave/minute 5-20 Hz @ 0.0 1 g 2 /Hz 20-200 Hz @ -3.0 dB/oct ave Random 5-20 Hz @ 1 m 2 /Sec 3 Random 20-200 Hz @ -3 m/Sec 2 Shock Half -sine , 11 m/Sec, 3[...]

  • Seite 38

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 38 2.4 Module Installation and Remo val Note the f ollowing poin ts at the time o f installing R TM- A T CA -7150: z Make sure that you wear an elect rostatic di scharge (ESD)-p reventive wrist stra p to prevent the static electricit y from hur ting you o[...]

  • Seite 39

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 39 z Hold the ejector handle s and the face pl ate when you ins ert or remove RTM-A T C A -7150. Do not touch the components inside o f the blades. z Kee p the blade verti cal when you instal l RTM- A T C A-7150. Align the blade with the slot and then ins[...]

  • Seite 40

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 40 2.5 Installation Preparations The installa tion prepa rations proce ss inc ludes : z che c k t h e i ns t a lla ti o n env i ro nm en t z we ar the ESD -prev entiv e wrist strap z remo ve the blank fille r panels z unpack and check the R TM -A T C A -7[...]

  • Seite 41

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 41 T o we ar the ESD -preve ntive wrist strap, proc eed as follo ws: 1. Wr ap the E SD -preven tive wrist strap around your wrist, as sho w n in the figure bel ow . 2. F aste n the latch. M ake sure that the ESD -preven ti ve wrist strap well t ouches y o[...]

  • Seite 42

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 42 2.5.2 R emoving Fille r Blades If the slot is occupied with a fil ler blade y ou hav e to remov e it first. Af ter a filler blade is re m oved, pl ace it in the equipment room or othe r moisture-proof and dust -proof place s. Y ou should install a bl a[...]

  • Seite 43

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 43 T o remo ve the filler blade , proceed as follo ws: 1. A s s how n i n st ep 1 of th e f igu re b elow, use a sc rewdriv er t o anticl ock wise loose n the t wo cap tive scre ws on a filler blade . 2. As shown in step 2 of the figure below , remov e th[...]

  • Seite 44

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 44 2.6.1 Precautions Note the f ollowing poin ts at the time o f installing or repl acing compo nen ts : z Make sure that you wear an elect rostatic di scharge (ESD)-p reventive wrist stra p to prevent the static electricit y from hur ting you or dama gin[...]

  • Seite 45

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 45 z Ensure that y our sleeves are tighte ned or rolled up ab ov e the elbow . For safe t y purpose , it is not recommended to wear jewelr y, wa tch, glasses with metal frame, or clothes with metal buttons. z Do not exert too much forc e, or insert or rem[...]

  • Seite 46

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 46 z Othe rs If a serious proble m occurs and cannot be solved when y ou install or replac e the com p on ent , cont a c t E mer s on N et wo r k P o wer Embedded Computing f or technical suppor t. 2.6.3 GE Daughter Card This manual conside rs the GE daug[...]

  • Seite 47

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 47 2.6.3.1 Installation Positions When the GE d aughter card is us ed with the RTM- A T CA -7150 it can be installed on the daught er card c onnec tor J1, J2, J3, J4. The defa ult position as u sed on the RTM -A T C A -7150-GE is position J4. The default [...]

  • Seite 48

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 48 2.6.3.2 Installing the GE Daughter Card T o install the GE daughter car d, proceed as f ollows. 1. W ear the ESD -preven tive wrist strap. F o r more inf o rmation re fe r , We a r i ng t he E S D - Preve ntive W rist Str ap . 2. Lay RTM-A T C A-7150 w[...]

  • Seite 49

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 49 6. Insert the GE daughte r card in R TM - A T CA -7150 by fac ing the daughte r card at an angle of 45° to the R TM. Align the daughter car d connector with the c onnector on RTM-A T C A-7150, and the daughter card posi tioning holes with th e pla sti[...]

  • Seite 50

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 50 card is fa stened by the pla stic latch es. See st ep 3 in the figure belo w . Figure 2-4 Installing the G E Daught er Ca rd 1 2 3[...]

  • Seite 51

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 51 7. Insert RTM -A T C A-7150 with the GE daugh ter car d installed in the shelf . For more infor mat io n r efer , Installing R TM- A TCA-7150 . Af te r installa tion, check if R TM -A T C A -7150 ca n be powered on and work norm ally . Use the network [...]

  • Seite 52

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 52 6. T ake the new GE d aughter card out o f the antistatic package . Figure 2-5 Replac i ng the GE Daughte r Card. 2 3 1[...]

  • Seite 53

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 53 7. Insert the GE daughte r card in R TM - A T CA -7150 by fac ing the daughte r card at an angle of 45° to the R TM. Align the daughter car d connector with the c onnector on RTM-A T C A-7150, and the daughter card posi tioning holes with th e pla sti[...]

  • Seite 54

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 54 3. As shown in step 1 o f the figure below , inse r t t wo plastic supports verticall y in the holes u sed to f aste n the FC daughte r card. 4. As shown in ste p 2 of the figure be low , at the back side o f RT M -A T CA -7150, use a screwdrive r to c[...]

  • Seite 55

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 55 6. Insert the GE daughte r card in R TM - A T CA -7150 by fac ing the daughte r card at an angle of 45° to the R TM. Align the daughter car d connector with the c onnector on RTM-A T C A-7150, and the daughter card posi tioning holes with th e pla sti[...]

  • Seite 56

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 56 card is fa stened by the pla stic latch es. See st ep 3 in the figure belo w . 7. Insert RTM-A T C A-7150 with the FC daughter card installed in the she lf . For more Figure 2-6 Installing the FC Dau ghte r Card 3 2 1[...]

  • Seite 57

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 57 infor mat io n r efer , Installing R TM- A TCA-7150 . Af te r installa tion, check if R TM -A T C A -7150 ca n be powered on and work norm ally . Use the optical fibe r to connect RTM- A T CA -7150 to the external stor age system. Check if R TM - A T C[...]

  • Seite 58

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 58 6. T ake the new FC d aughter card out o f the antistatic package. Figure 2-7 Re placing the FC Daught er C ard. 2 3 1[...]

  • Seite 59

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 59 7. Insert the FC daughter card in R TM- A T CA -7150 by fac ing the daught er card a t an angle of 45° to the R TM. Align the daughter car d connector with the c onnector on RTM-A T C A-7150, and the daughter card posi tioning holes with th e pla stic[...]

  • Seite 60

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 60 Installation Procedure wi th Installed Front Blade The following proc edure describes the installati on of RTM- A T C A-7 150. It assumes that y our syste m is power ed on. If your system is powe re d off , you can disregar d the blue LED and thus skip[...]

  • Seite 61

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 61 5. As shown in step 1 o f the figure below , align the upper and lowe r sides of RTM- A T CA -7150 with the guide rails (the edges of the slot). S lide RTM-A T C A-7150 along the guide rails until the positioning pins of R TM- A T C A-7150 are inser te[...]

  • Seite 62

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 62 2.7.2 Remo ving RTM -A T C A-7150 T o remo ve RT M -A T C A-7150, proceed as f ollows: 1. W ear the ESD -preven tive wrist strap. F o r more inf o rmation re fe r , We a r i ng t he E S D - Preve ntive W rist Str ap . 2. The OOS, blue , and the healthy[...]

  • Seite 63

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 63 5. As shown in ste p 3 of the figure below , remo ve RT M -A T C A-7150 along the guide rails. 6. Plac e RTM -A T CA -7150 in the antistatic pack age . 2.8 Connec ting Ex ternal Cables After RTM-A T C A-7150 is installed in the shelf , you can co nnect[...]

  • Seite 64

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 64 If RTM- A T C A-7150 is configured with the GE daughte r card and FC daughte r card, it provides the ex te rnal GE network por ts and ex ternal FC in te r face s. Net work cables and op tical fibers can be connected to R TM -A T C A -7150. Y ou can ch [...]

  • Seite 65

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 65 2.8.2 Connec tin g Net work Cables When R T M- A T CA -7150 is confi gured with the GE daughte r card, it provides two ex terna l Etherne t inte r fac es with 10/100/1000M Bas e- T auto -negoti ation. Network cables are us ed to connect RTM -A T C A -7[...]

  • Seite 66

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 66 The figure belo w shows the me thod of c o nnec ting the net work cables to RT M -A T C A-7150. 2.8.3 Connec tin g Optical F ibers When R TM -A T C A -7150 is c onfigured with the FC da u g h t e r c a r d , i t p r o v i d e s t w o e x t e r n a l 2 [...]

  • Seite 67

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 67 As shown i n step s 1 and 2 in the figu re below , inser t the optical modu le in the FC inter face and then insert the o ptical fibers in the optical module. Figure 2-12 C onnecting the Opti cal Fibe r s to RT M- A T C A-7150 2 1[...]

  • Seite 68

    Installation of the RTM-ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 68[...]

  • Seite 69

    Chapter: 3 ATCA-7150 and RT M-ATCA-7150 Gettin g Started (6806800G4 2B) 69 Hardware Installation o f A T C A-7150 3.1 Ov er view This chap ter describes : z Unpacking and inspecting the blade z Environmen tal and power require ments z Precautions during the operation z Checking the instal latio n en vironment z Installing acce ssories z Installatio[...]

  • Seite 70

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 70 3. R emov e the desiccant bag shipped toge ther with the blade and dispos e of it acco rding t o your c ountr y’s legislatio n. Unpacking the Blade T o unpack and check the A T C A -7150 suite , proceed as fo llows: 1. W ear the ESD -preven tive wri[...]

  • Seite 71

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 71 3.3 Environmental and P ower R equirements The following en vironmental and power rewu ireme nts are applicable t o the blade. 3.3.1 Environmental R equirements T able 3-2 Environmen tal R equiremen ts Req ui r ement O p era ti ng No n - Op er at in g[...]

  • Seite 72

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 72 3.3.2 Po wer Requirements Mak e sure that the blade is u sed in an AdvancedT CA shelf connected to -48VDC up to -60VDC, acco rding t o T e lecommunica tion Net work V oltage (TNV-2). A TNV -2 circuit is a circuit whos e normal ope rating vo ltages exc[...]

  • Seite 73

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 73 3.4 Precautions Note the f ollowing poin ts at the time o f installing R TM- A T CA -7150: z If an RTM is planned to be used, you must install the RTM in the slot before installing t he A T CA -7150 in the paired slot. If th e A T CA -7150 is installe[...]

  • Seite 74

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 74 3.4.1 ESD Prev ention Static electricit y may hur t you or damage the device . T o minimize the dama ge, pay a ttention to the f ollowing poin ts: z Bef ore you oper ate the devic e, wear the ESD -prev en tive wrist strap. Bo th termin als of the ESD [...]

  • Seite 75

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 75 3.5 Checking the Installation Environment T able 3-4 lists the envir onment f or installing the A T CA -7150 suite . 3.5.1 W earing the E SD -Preventiv e Wrist Strap T able 3-4 Environmen t for Inst alling the A TCA-7150 Suite Item Des cription Cabine[...]

  • Seite 76

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 76 T o we ar the ESD -preve ntive wrist strap, proc eed as follo ws: 1. W rap the ESD -preve ntive wrist strap around your wrist, as sh own in Figure 3-1 . 2. F aste n the latc h. Make sure th at the ESD -prev entiv e wrist strap well touc hes yo ur bare[...]

  • Seite 77

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 77 3.5.2 Remo ving Blank Fi ller Blades z Af te r you re move a bl ank filler blade , store it in the equipment room or a d amp -proof and dust -proof place . z Af ter y ou remov e a blade from the she lf, install a blank filler bl ade in vacant slo t. O[...]

  • Seite 78

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 78 Bef ore you install the A T C A-7150 suite , remo ve bl ank filler blades fr om installation slo ts as fol l ow s: 1. Use a screwdrive r to anticlockwise loosen the two captiv e screws on a blank fille r blade , as shown in Figure 3- 2 . 2. Pull the b[...]

  • Seite 79

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 79 3.6.1 Precautions When you install or replac e components, pa y atten tio n to the following points: z Wear th e E SD -p reventi ve w ri st st rap to p revent the st at ic el ec t ric it y fr om dama gin g t he device . z Keep t he a r ea w h er e t h[...]

  • Seite 80

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 80 T able 3-5 lists the optional co mponen ts suppor ted by the A T CA -7150. 3.6.3 Preparations Befo re you install or replace the compone nt, mak e the following pre parations : z Confirming the fea s ibilit y of the opera t ion — There are avail a b[...]

  • Seite 81

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 81 z Prep aring spare pa r ts and tools — Prepare the c o mponent t o be installed or replac ed. When y ou hold or transport the componen t, use the speci al antistatic pack age . Also, you need to tidy , record, and repair the component during ro utin[...]

  • Seite 82

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 82 Figure 3 -3 shows the positions of the DIMM int erfaces on the A T CA -7150. 3.6.4.1 Installing the DIMM T o install the DIMM, proceed as follows : 1. W ear the ESD -preven tive wrist strap. For de tails, see Wearing the ESD -Preventive W rist Strap o[...]

  • Seite 83

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 83 2. Lay the A T C A-7150 w here the DIMM is to be installed on the antistatic de sktop . 3. T ake the DIMM out of the antistatic package. 4. Mak e sure that two interface fixing clips are fully open. Adjust the DIMM to align it with the DIMM inte r fac[...]

  • Seite 84

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 84 7. Inser t the A T C A-7150 with the DIMM installed in the shelf . For de tails, see Ins tal ling the A T C A-7150 in a Powered She lf on page 91 . Af te r installation, inse r t the A T CA -7150 in the shelf and powe r on the A T C A-7150. Check whet[...]

  • Seite 85

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 85 For de tails, see Remo ving the A T C A-7150 on page 95 . 3. Open one fixing clip of the DIMM carefully until the DIMM rises from the interface. Hold the top edge of the DIMM and open the other fixing c lip carefully until the DIMM is re moved from th[...]

  • Seite 86

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 86 8. Install the A T C A -7150 with the DIMM replac ed. For de tails, see Ins tal ling the A T C A-7150 in a Powered She lf on page 91 . Af ter repla cement, che ck w heth er the OS can be lo aded prop erly . If it ca n be, in the OS, ch eck whethe r th[...]

  • Seite 87

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 87 3. Exer t even fo rce to pus h t he hard dis k s mo o thly in the hard disk holder . Al ign the screw holes at the sides of the hard disk with th ose at the sides of the holde r , as shown in Figu re 3-6 . 4. Use the s crewdrive r to fast en the f our[...]

  • Seite 88

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 88 Af te r installation, c heck whether the A T C A -7150 can be powe red on and work norm ally and whethe r the da ta in the har d disk can be re ad and written normally . Figure 3-6 Installing the Hard Disk 1 2 3[...]

  • Seite 89

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 89 3.6.5.2 Replacing the Hard Disk T o repl ace the hard disk, proc eed as f ollows: 1. W ear the ESD -preven tive wrist strap. For de tails, see Wearing the ESD -Preventive W rist Strap on page 75 . 2. R emov e the A T C A -7150 whose har d disk is to b[...]

  • Seite 90

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 90 Af te r repl ace men t, check whethe r the A T C A-7150 can be powered on and wo rk normally and whethe r the da ta in the har d disk can be re ad and written normally . Figure 3-7 Re moving the Hard Disk 1 2 3 4[...]

  • Seite 91

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 91 3.7 Installing and Re mo ving the Blade 3.7.1 Inst allation RTM-A T C A-7150 must be installed befo re the A T C A-7150 to av oid product damage . For inf ormation on ho w to install the RTM-A T C A-7150, refe r to Chapter 2, Installation of t he RTM-[...]

  • Seite 92

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 92 6. User the screwdriv er to clockwise faste n the screws to fix the A T C A-7150, as shown in Figure 3-8 . 7. Fully ope n the ejector handle s and the A T C A -7150 is re ady for powe r -on. Bef ore you pow er on the A T C A-7150, connect the required[...]

  • Seite 93

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 93 z The cables are prope rly connected. z The cables are we ll bound. 3.7.1.3 Power-On 3.7.1.3.1 Checks Before Power-On Bef ore power -on, you need to c onfirm tha t: z The RTM of the server blade and SMM are installed properly . z The shelf and SMM are[...]

  • Seite 94

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 94 2. Close the upper and lowe r ejector handles. The HO TSW AP LED bl inks at the shor t blink rate. The OOS and HEAL THY LEDs blink for 10 times at the same time . When the OOS and HO TSW AP LEDs are off and the HE AL TH Y LED is on (green), the A T C [...]

  • Seite 95

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 95 3.7.2.1.1 Checks Before Power-Off Bef ore power -off , you need to con firm that: z Da ta has been s aved on the A T CA -7150. z No application runs on the A T C A-7150. z The A T C A-7150 has quitt ed the opera t ing system (O S). 3.7.2.1.2 Procedure[...]

  • Seite 96

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 96 4. R emov e the A T C A -7150 along the guide rails, a s shown in Figur e 3-9 . 5. Plac e the A T C A-7150 in the antistatic package . 3.8 Ejector Handles The A T C A-7150 suppor ts hot swap. As shown in Figure 3-3 , the fac e plate of the A T CA -715[...]

  • Seite 97

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 97 T able 3-7 describes the inse r tion and remov al of the A T C A -7150 by u sing the ej ector handles. Power -O n a nd Power -O ff T able 3-8 describes the powe r-on and pow er -off of the A T CA -7150 by using the e jector handles. T able 3-7 Inserti[...]

  • Seite 98

    Hardware Installation of ATCA-7150 ATCA-7150 and RTM-A TCA-7150 Getting Start ed (6806800G42B ) 98[...]

  • Seite 99

    Appendix: A ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 99 A Tr o u b l e s h o o t i n g A. 1 O v erv i e w This chap ter describes : z Precautions z Principles z Res ou r ce s z LED Disp la y Exc eptions z Power -On Star tup E xc eptions z OS Excepti ons A. 2 P re ca ut io ns A .3 Principles During troubleshooting, f ollow the pr[...]

  • Seite 100

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 100 z Analyze the alarm of high leve l and then that of low lev el. Analyze the alarm o f high leve l, such as critical alarm or major al ar m. Then, analyze the alarm of low leve l, su ch as minor alarm or warning alarm. A . 4 Resources Y ou can u se the follo wing resou[...]

  • Seite 101

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 101 z Detailed descr iption on the fault z Device type and sof t ware version z Mea sures tak en after the f ault occurred an d rel ated resu lts z Problem leve l and required solu tion time The con tac t address o f Emerson Network Power is : Emerson Ne t work Po we r - E[...]

  • Seite 102

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 102 The IS LED of the A T C A-7150 blinks (red). The alar m sev erit y varies with the blinking freque ncy . The higher the blinking freque ncy , the more serious the alarm. The IS LED can be gree n or red. The working state of the A T C A -7150 decides the c olor of the [...]

  • Seite 103

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 103 3. Check the power supply o f the shelf . If the powe r is low , the A T C A-7150 cannot be po wer ed on through the S MM. 4. Check whether the S M M is firmly inse r ted in the prope r position and works we ll. Mak e sure that at le ast one SMM is present in the shelf[...]

  • Seite 104

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 104 T o solve the proble m, proceed a s follo ws: 1. Make sure tha t all DIMMs of correct t ype are installed in the slots properly . 2. Check f or consiste nc y of the siz e and frequency of the installed DIMMs. 3. Re-install the DIMM s. For details, see Installing the D[...]

  • Seite 105

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 105 A .9.2 A T C A-7150 Automatically Shuts Do wn Desc rip tion The A T C A-7150 automa tically shuts do wn without any explic it rea son. Solution T o solve the proble m, proceed a s follo ws: 1. Make sure that e a ch component of the shelf is installed properly . For det[...]

  • Seite 106

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 106 A .10.2 Mouse Cannot Be Used Desc rip tion The mouse cannot be u sed. Solution T o solve the proble m, proceed a s follo ws: 1. Make sure that the cable of the mou se is co nnected properly and firmly and that the cable of the mous e and that of the k eyboard are not [...]

  • Seite 107

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 107 5. Re place the monitor or A T C A-7150. For details on how to re plac e the monitor , ref er to the docume nt shipped wi th the monitor th at you u se . For details on ho w to repl ace the A T C A-7150, see Installing and R emovin g the Blade on page 91 . A .10.4 Moni[...]

  • Seite 108

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 108 T o solve the proble m, proceed a s follo ws: 1. Make sure that: z The RTM of the server blade is inse r ted properly . z The upper and lowe r ejec tor ha ndles are fully closed. z The LEDs are in normal state . 2. Make sure that the cable connector s of the monitor c[...]

  • Seite 109

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 109 T o solve the proble m, proceed a s follo ws: 1. Make sure th at the net work module that y ou use is installed in the server syste m and works normally . For details, ref er to the respective syste m documenation. 2. The sett ing in the network module is suitable f or[...]

  • Seite 110

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 110 If you think tha t the fault is cau sed by so f t ware , see A Fault Occurs in Soft ware on p age 109 . Dam aged CMOS da ta or BIOS codes ma y c ause some unc er tain problems. T o rese t the CMOS data, c ontac t Emerson Net work Pow er f or technical support. For det[...]

  • Seite 111

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 111 5. Install and powe r on the A T C A-7150. If the problem persists, repl ace the following com p on ent s i n o rd er : a. Hard disk b. D IM M c. CPU d. Main board 6. If the A T C A-7150 passe s all system te sts, a fault may occ urs in the ex ternal ne t work connecti[...]

  • Seite 112

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 112 04 Check the CMO S diagnostic b y te to dete rmine whether ba tter y powe r is prope r and whethe r the CMOS checksum is proper . V erif y the CMOS checksum by reading the storage area. If the CMOS c hecksum is wrong, upd ate CMOS with powe r -on default values and cl[...]

  • Seite 113

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 113 13 Initi aliz e early POST c hipse t registers. 1. Re st art the A T C A-7150. 2. Re plac e the A T C A-7150. 24 Uncompress and initializ e the specific BIOS mo dules of any p latf orm. 1. Restart the A T CA -7150. 2. Upgrade the BIO S and restar t the A T C A-7 150. 3[...]

  • Seite 114

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 114 3B T est f or total memory in stalled in the system. Also, Check for the Dele te or ESC key to limit mem or y test. Displa y total memor y in the sys tem. 1. Restart the A T CA -7150. 2. Re plac e the A T C A-7150. 3C Initi aliz e Mid POST chi pse t registe rs. 40 Det[...]

  • Seite 115

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 115 A .14 DI M Code Checkpoints The device initi alization man ager (DIM) gets control a t various time during BIOS POST to initialize diff eren t system buses. 85 D i splay er ro rs to t he user an d g et t h e use r response f or errors. Handle the fault according to the[...]

  • Seite 116

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 116 T able A-2 lists the c heckpoin ts where the DIM module is a cces sed and solutions.[...]

  • Seite 117

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Gett ing Started (6806 800G42B) 117 T able A - 2 DI M co de ch eck po ints Checkpoint Description Solution 2A Initia liz e diff eren t bus es and perform the following functions: z Re set, Detect, and Disa ble (func tion 0) z Static Device Initialization (func tion 1) z Boot Output Device Initialization [...]

  • Seite 118

    Troubleshooting ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 118 A. 1 5 A C P I C od e C he ck p oi nt s ACPI che ck poi nts ar e di splaye d w hen an ACPI cap abl e OS eit her enter s o r l eaves a sl eep s t ate. T able A-3 lists the t ypes of c heckpoints tha t may occur during ACPI slee p or wake states and solutions. T able A-[...]

  • Seite 119

    Appendix: B ATCA-7150 and RTM -ATCA-7150 Getting Sta rted (6806800G42 B) 119 B R elated Document ation B.1 Emerson Net work P ow er - Embedded Computing Doc uments The Emerson Net work Powe r - Embedded Computing publica tions listed be low are ref erenced in this manual. Y ou can obtain elec tronic copies of Emerson Net wor k Power - Embedded Comp[...]

  • Seite 120

    Related Documentation ATCA-7150 and RTM -ATCA-7150 Getti ng Started (6806800 G42B ) 120 PICMG picmg.or g/specifica tions.stm PICMG 3.0 Revision 2.0 Advanced T C A Base Specification PICMG 3.1 Revision 1.0 Specification Ethernet/Fib er Channel T able B-2 Rela ted Specific ations (continued) Organization Document Title[...]

  • Seite 121

    [...]

  • Seite 122

    HOW TO R EACH LITERA TURE AND TEC HNICAL SUPPORT: Te m p e , A r i z o n a , U S A 1 800 759 1107 1 602 438 5720 Munich, Germ any +49 89 9608 0 For lite rature , training, and technical assistance and support progra ms, visit www .emersonnetworkpowe rembedde dcomputi ng.com Emerso n, Business -Critica l Continui t y , Emerso n Net work Power and th[...]