Epson EB-1770W Bedienungsanleitung

User’s Guide[...]

Notations Used in This Guide • Safety indications The documentation and th e projector u se graphical sy mbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly resu lt in personal [...]

Notations Used in This G u i d e ........................ 2 Introduction P r o j e c t o r F e a t u r e s .......................................... 8 L i s t o f F u n c t i o n s b y M o d e l ............................... ......... 8 Q u i c k a n d E a s y S e t u p , P r o j e c t i o n , a n d S t o r a g e .......................... 8 C o[...]

C h a n g i n g t h e a s p e c t r a t i o f o r c o m p u t e r i m a g e s ............. .......... 4 2 Useful Functions P r o j e c t i o n F u n c t i o n s ......... .............................. 4 5 P r o j e c t i n g W i t h o u t a C o m p u t e r ( S l i d e s h o w ) ............ ........... .... 4 5 Specifications for files that can b[...]

I m a g e s a r e f u z z y , o u t o f f o c u s , o r d i s t o r t e d ........................ .. 9 4 I n t e r f e r e n c e o r d i s t o r t i o n a p p e a r i n i m a g e s ............. ............. 9 5 The image is truncated (large) or small, o r t h e a s p e c t i s n o t s u i t a b l e .... ..... 9 5 I m a g e c o l o r s a r e n o [...]

A p p e a r a n c e .............................................. 1 2 7 G l o s s a r y .......................... ............ ........... 1 2 8 G e n e r a l N o t e s ........... ................................. 1 3 0 A b o u t N o t a t i o n s ....... ..................... ................. 1 3 0 G e n e r a l N o t i c e : .................[...]

Introduction This chapter explains the projector's features and the part names.[...]

List of Functions by Model Available functions differ depending on the model being used. See the table below for a list of the functions avail able for each model. Fun c ti on EB-1775W EB- 1770W EB-1760W EB-1750 USB Display HDMI Connection - Screen Fit --- Auto H/V-Keystone --- Auto V-Keystone - Wireless LAN Connection * 1 * 1 - WXGA Resolutions - [...]

Detecting projec tor movements an d automatically corr ecting image distortion This projector automati cally corrects keystone distortion and focus problems which occur when positioning or moving the projector. For EB-1775W Automatically corrects ve rtical and horizontal keystone distortion. s "Correcting automatically - Auto H/V-Keystone - (E[...]

All of the features in this guide are explained using illust rations of EB-1775W unless otherwise mentioned. Front/Top EB-1770W EB-1760W EB-1750 Name Function A Air exhaust ven t Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects tha[...]

Name Function O Con tr ol p a n el Operates the projector. s "Control Panel" p.13 P Lamp c over Open when replacing the projector's lamp. s "Replacing the Lamp" p.103 Rear Name Function A Pow er in le t Connects the power cable to the projector. s "From Installation to Projection" p.26 B Vi d e o p o rt Inputs com[...]

Name Function G Audio port Connects an audio cable to output audio from the projector's speakers. H Re m o te rec ei ve r Receives signals from the remote control. s "Remote control operating range" p.17 I Lamp C over Fix ing Sc rew Screw to fix the lamp cover in place. J Sec urit y slot The security slot is compatible with the Micro[...]

Name Function C Fron t adju st able fo ot When setup on a surface such as a desk, extend the foot to adjust the position of the image. s "Adjusting the Image Position" p.37 D Sc rew ho le fo r th e wir eles s L AN uni t co v e r (EB-1775W/EB-1770W/ EB-1760W only) Screw hole to fix the wireless LAN unit cover. Control Panel Name Function A[...]

Name Function E [ w ][ v ] butto ns • Performs vertical keystone correction. s "Correcting keystone distortion in vertical directions" p.34 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.67 s "Using the Help[...]

Name Func tion A [ t ] button Turns the projector power on or off. s "From Installation to Projection" p.26 B [Computer ] but ton Changes to images from the Compute r port. C [V ideo] button Each time you press the button, the input source changes between images from the Video port and the HDMI port (EB-1775W/EB-1770W/EB-1760W only). D [S[...]

Name Func tion N [Enter] button • When the Configuration menu or the Help screen is displayed, it accepts and enters the current selection and moves to the next level. s "Using the Configuration Menu" p.67 • Acts as a mouse's left button when using the Wireless Mouse function. s "Using the Remote Control to Operate the Mouse[...]

Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries. Have two AA size manganese or alkaline batteries ready. You cannot use other ba[...]

Preparing the Projector This chapter explains how to install the projector and connect projection sources.[...]

Installation Methods The projector supports the following four different projection methods. Install the projector according to the co nditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen. (Rear projec‐ tion) • Suspend the projector from the[...]

If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. See the following for more information on correcting ke ystone di stortion. s "Automatically Adjust to Fit the Screen Frame - Screen Fit - (EB-1775W only)" p.31 s "Correcting Keystone Distor tion" p.33 a Place the projecto[...]

This section gives exam ples of how to connect the projector an d the projection so urce. Illustrations in this section are of EB- 1775W/EB-1770W/EB-1760W. The port name , location, and connector orientation differ depending on the sour ce being connected. Connecting a Computer To project images from a computer, connect th e computer using one of t[...]

Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a comm ercially av ailable video cable Connect the video output port on the image source to the projec tor's Video input port using a commercially available video cabl e. To output audio [...]

Connecting USB Devices You can connect devices such as USB memory, the optional Docume n t C a m e r a , a n d U S B c o m p a t i b l e h a r d d i s k s a n d d i g i t a l c a m e r a s . Using the USB cable supplied with the USB device, connect the USB device to the USB (Type A) port on the projector. USB Ty p e A When the USB device is connect[...]

Removing USB devices After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from the projector. Connecting Equipment 24[...]

Basic Usage This chapter ex plains how to project and adjust images.[...]

From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. 6 a Connect the projector to an electrical outlet with the power cable. b Connect the projecto r to the computer with the comput er cable. c Turn on the pro jector. d S l i d e o p e n t h e A[...]

Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Because only images from ports receiving an image are projected, you can quickly project the image you want. Using the remote c ontr ol Using the c ontrol panel A Computer B[...]

Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Rem ote co ntro l A Changes to images from the Computer port. B Each time the button is pressed, it cycles through the following images: • Video port • HDMI port (EB-1775W/EB-1770W/EB-1760W only) C[...]

For Mac OS OS Mac OS X 10.5.1 or later Mac OS X 10.6.x CP U Power PC G4 1GHz or faster Recommended: Core Duo 1.83GHz or faster Amount of Mem ory 512 MB or more Hard Disk Fr ee S pace 20 MB or more Dis pla y Resolution of no less than 640x480 and no higher than 1680x1200. Display color in 16-bit color or greater Connecting for the first time The fir[...]

a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer. • If nothing is projected for some reason, click All Programs - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.xx on your computer. • When using a computer runni ng Windows 2000 under user authority, a Windows error me[...]

Automatically Adjust to Fit the Screen Frame - Screen Fit - (EB-1775W only) Screen Fit is a function that corrects the projected image so that it aligns with the frame (outer border) of th e s c r e e n , w h i t e b o a r d , a n d s o o n . B y pressing the [Screen Fit] button on the remote control or the control panel, the projected image is adj[...]

b A d j u s t t h e z o o m r i n g s o t h a t t h e y e l l o w f r a m e i s b i g g e r t h a n t h e screen frame as shown below. Position the black message box in the center of the screen. If the yellow frame is still within the screen frame even after adjusting the zoom ring to its maximum size , try moving the projector further away from th[...]

a • Screen Fit corrects the projected image when it detects two or more sides inside the projected area, and aligns with the detected frame. For example, when projecting onto a wide screen in a small room, you can make corrections by fitting the top and bottom sides of the screen into the projected area. • Screen Fit may not work well in dark e[...]

When the projector remains still for about two seconds after it detects movement, it displays a screen for adjustment and then automatically corrects the projected image. a • Auto H/V-Keystone only w orks when Proje ction is set to Fr ont from the Configuration menu. s Extended - Projectio n p.74 • If you do not want to use the Auto H/V-Keyston[...]

a Press the [Menu] button while projecting. s "Using the Configuration Menu" p.67 Using the remote c ontr ol Using the c ontrol panel b Select Keystone from Settings . c Select Quick Corner , and then press the [Enter] button. d Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [ ], [ ], [ ], and [ ] buttons on the co[...]

e Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [ ], [ ], [ ], and [ ] buttons on the control panel, correct the position of the corner. If the triangle in th e direction yo u a r e a d j u s t i n g t h e s h a p e t u r n s g r a y , as shown in th e scree nshot below, you cannot adjust the shape any further in that direc[...]

W T W T W T Adjusting the Image Position Press the foot lever to extend and retract the front foot. You can adjust the position of the image by tilting the projector up to 14 degrees. a The larger the angle of tilt, the harder it becomes to focus. Install the projector so that it only needs to be tilted at a small angle . Adjusting the Horizontal T[...]

• Turn the focus ring to adjust the focus. (EB-1770W/EB-1760W/EB-1750 only) Adjusting the Volume You can adjust the volume using one of the following methods. • Press the [Volume] buttons on the remote control to adjust the volume. Rem ote co ntro l [ a ] Decreases the volume. [ b ] Increases the volume. • Adjust the volume from the Configura[...]

Mod e App lic ation Bla c kbo ard Even if you are projecting onto a blackboard (greenboard), this setting gives your images a natural tint, just like when projecting onto a screen. White bo ard Ideal for making presentations using a whiteboard. Cus t om i z ed Select Customized if you want to adjust the R , G , B , C , M , and Y settings in the Col[...]

a Auto Iris can be set only when the Color Mode is Dyna mic , Theatre , o r Customized . Changing the Aspect Ratio Change the aspect ratio g when video equipment is connected so that images that have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. Change the aspect ratio when projecting computer images at full [...]

A Normal B 4:3 C 16:9 * When a 720p/1080i signal is input, the display is in a zoomed 4:3 format (the image is cut off on the right and left sides). Adjusting Projected Images 41[...]

Changing the aspect ratio for computer images For EB-1775W/EB-1770W/EB-1 760W Each time the button is pressed, the aspect ratio changes in the order of Normal or Auto , 16: 9 , Full , Zoom , a n d Native . Computer Input Pr oj ec tor Aspect Setting Resolution Aspec t R atio Normal/ Auto * 16 :9 Ful l Zoom Nati v e XGA (1024x768) 4:3 WXGA (1280x800)[...]

Com puter Input Pr oj ec tor Aspect Setting Resolution Aspec t Ratio Normal 4:3 16: 9 WXGA (1280x800) 16:10 a I f p a r t s o f t h e i m a g e a r e m i s s i n g , s e t t h e Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.71 Adjusting Projected Images 43[...]

Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.[...]

Projecting Without a Computer (Slideshow) By connecting a USB storage device such as a USB memory or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called Slideshow. You can make presentations with just a USB storage device and the projector by converting PowerPoint files [...]

Projecting PowerPoint files conv erted in EasyMP Slide Converter USB PPT sit fse See the following manual for more inf ormation on converting PowerPoint files to scenarios using EasyMP Slide Conver ter. s EasyMP Slide Converter Operation Guide Slideshow operating methods Although the following steps are explained base d on the remote control, you c[...]

a • When AutoRun is set for a scenario, it is automatically played back with the highest priority over other input sources. If you want to stop it from playing back, press the [Esc] button on the remote control. • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially av[...]

b While projecting, press the [ ] o r [ ] b u t t o n . Stopping Slide show To close Slideshow, disconnect the USB device from the USB port on the projector. For digital cameras, hard di sks, and so on, turn of f the power to the device and then remove. Projecting the selected image Attention Do not disconnect the USB storage device while it is bei[...]

Projecting image files in a fo lder in sequence (Slideshow) You can project the image files in a folder in sequence, one at a time. This function is called Slideshow. Us e t h e f o l l o w i n g p r o c e d u r e t o r u n Slideshow. a To change files automatically when you run Slideshow, set Screen Switching Time from Option in Slideshow to anyth[...]

A Next Slide B Previous Slide C Next Slide or Animation D Previous Slide or Animation For SIT files A Next Slide B Previous Slide St oppin g pla y ba c k The message "Do you want to quit playing the scenario?" is displayed when you press the [Esc] button. Close by selecting Exit and pressing the [Enter] button. Continue playback by select[...]

Display Or der You can select to display the files in Name Order or Date Order . Sort O r de r You can select to sort the files In Ascending or In Descending order. Continuous Play You can set whether to repeat the Slid eshow. Sc r e en Sw itc h‐ ing Time You can set the time for a single file to be displayed in Play Slideshow. You can set a time[...]

a • If you use this function when projecting moving images, the images and sound con tinue to be played back by the source, and you cannot return to the point where A/V Mute was activated. • You can select the screen displayed when the [A/V Mute] button is pressed from the Configuration menu. s Extended - Display - A/V Mute p.74 • W h e n t h[...]

b Move the Pointer icon ( ). Re m o t e c on tro l When pressed in conjunction with the adjacent [ ], [ ], [ ], and [ ] buttons, the pointer can be moved diagonally. a You can use Pointer Shape to set the shape of the pointer icon. s Settings - Pointer Shape p.73 Enlarging Part of the Image (E-Zoom) This is useful when you want to expand images to [...]

b Move the Cross ( ) to the area of the image that you want to enlarge. Re m o t e c on tro l When pressed in conjunction with the adjacent [ ], [ ], [ ], and [ ] buttons, the pointer can be moved diagonally. c Enlarge. Re m o t e c on tro l [ z ] button: Expands the area each time it is pressed. You can expand quickly by holding the button down. [[...]

Wi ndows M a c OS OS Windows 98 Windows 98SE Windows Me Windows 2000 Windows XP Windows Vista Windows 7 Mac OS X 10.3.x Mac OS X 10.4.x Mac OS X 10.5.x Mac OS X 10.6.x * I t m a y n o t b e p o s s i b l e t o u s e t h e W i r e l e s s M o u s e f u n c t i o n u n d e r s o m e versions of the operating systems. Once the connection has been made[...]

a • When pressed in co njunction with the adjacent [ ], [ ], [ ], and [ ] buttons, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. • The Wireless Mouse function cannot be used while the following functions are being used.[...]

Setting the Projector ID a Press the [Menu] button while projecting. s "Using the Configuration Menu" p.67 Using the remote c ontr ol Using the c ontr ol panel b Select Projector ID from Extended . c Choose the ID you want to set and press the [Enter] button. d Press the [Menu] button to finish making settings. Setting the remote control [...]

a Point the remote control at the remote receiver of the target projector and pres s the [ID] button on th e remote control. When you press the [ID] button, the current Projector ID is displayed on the projection screen. It disappears in about three seconds. Re m o t e c on tro l b While holding the [ID] button, press the number button that matches[...]

a Press the [Menu] button. s "Using the Configuration Menu" p.67 b Select Multi-screen from Extended . c Select the level to be corrected in Ad justment Level . • Each time a level is selected, the pattern of the level selected is displayed. • You ca n star t correcting from any level, usually you ca n make it d a r k e r o r l i g h [...]

Saving a User's Logo You can save the image that is currently being projected as a User's Logo. a Once a User's Logo has been saved, the logo cannot be returned to the factory default. a P r o j e c t t h e i m a g e y o u w a n t t o s a v e a s t h e U s e r ' s L o g o , a n d t h e n press th e [Menu] but ton. s "Using [...]

Re m o t e c on tro l a You can save at 400x300 dots in size . e When you press the [ Enter] button and the me ssage "Sel ect this image?" is displayed, select Yes . f Select the zoom factor from the zoom setting screen. g When the message "Sav e this image as the User's Logo?" is displayed, select Yes . The image is saved.[...]

The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing th e settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.64 • Anti-Theft Lock The projector is equipped with the foll[...]

a • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.63 • When the password is set, stick the supplied password protect sticker in a visible position on the projector as a further theft deterrent. b S[...]

When you enter the correct passwor d, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be lock ed." is displayed for approximately five minutes, and then the projector switches to standby mode. If this happens, disconnect[...]

d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods. • Select Of f from Control Pane l Lock . s Settings - Control Panel Lock p.73 • Press and hold down the [Enter] button on the control pane[...]

Configuration Menu This chapter explains how to use the Configuration menu and its f unctions.[...]

This section explains how to use th e Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations. a Display the Configuration menu screen. b Select a top menu item. ① ② c Select [...]

Configuration Menu Table Settable items vary depending on the model being used and the image signal and source being projected. To p Menu Name Su bmenu Na me S etti ng V alu es Image menu s p.70 Color Mode Dynamic, Presentation, Theatre, Photo, sRG B, Blackboard, Whiteboard, and Customized Brightness -24 to 24 Contrast -24 to 24 Color Saturation -3[...]

To p Menu Name Su bmenu Na me S etti ng V alu es Multi-screen Adjustment Level, Brightness Correct., Color Correct. (G/R), and Color Correct. (B/Y) Language 15 or 35 languages * 1 Info menu s p.84 Lamp Hours - Source - Input Signal - Resolution - Video Signal - Refresh Rate - Sync Info - Status - Serial Number - Event ID - Reset menu s p.84 Reset A[...]

Image Menu Settable items vary depending on the image signal and source currently being projected. Setting details ar e saved for each image signal. s "Automatically Detect Input Signal s and Change the Projected Image (Source Search)" p.27 Submenu Function Col o r M od e You can select the quality of the image to suit your surroundings. [...]

Signal Menu Settable items vary depending on the image signal and source currently being projected. Setting details ar e saved for each image signal. You cannot make settings on the Sign al menu when the source is USB D i s p l a y , U S B , o r L A N . s "Automatically Detect Input Signal s and Change the Projected Image (Source Search)"[...]

Submenu Function Aspe c t You ca n set the aspect ratio g for projected images. s "Changing the Aspect Ratio" p.40 Ov er scan (This cannot be set when a di git al RGB signal is input.) Changes the output image ratio (the range of the projected image). You can set the cropping range to Off , 4% , or 8% . When the source is HDMI, Aut o is a[...]

Settings Menu Submenu Function Ke yst o n e You ca n correct keystone distortion. • When H/V-Keystone is selected: • Correcting manually Adjust V-Keystone and H-Keysto ne to correct horizontal and vertical keystone distortion. • Correcting automatically Set Auto H/V-Keystone * to On . s "Correcting automatically - Auto H/V-Keystone - (EB[...]

Submenu Function Test Pa ttern You can display a test pattern to adjust the pr ojection without connecting other equipment when you set up the projector. While the test pattern is dis played, you can adjust keystone, zoom, and focus. To cancel the test pattern, press the [Esc] button on the remote control or the control panel. Res e t You can reset[...]

Submenu Function Oper at ion Direct Power On : S e t t o On to turn on the projector simply by plugging it in. When the power cable is plugged in, note that the projector turns on automatically in cases such as a power outage being restored. Sleep Mode : W h e n s e t t o On , this automatically stops projection when no image signal is being input [...]

Network Menu (EB-1775W/EB-1770W/EB-1760W Only) When Network Protect is set to On in Password Protect , a message is displayed and the network settings cannot be changed. Set Netwo rk Protect to Off and then configure the network. s "Setting Password Protect" p.62 Submenu Function Net. I nfo. - W ir e‐ less LAN Displays the following net[...]

Yes : Saves the settings and exits the Network menu. No : Does not save the settings and exits the Network menu. Cance l : Continues displaying the Network menu. Soft keyboard operations The Network men u contains items tha t require input of alphanumerics during setup. In this case, the following software keyboard is displayed. Use the [ ], [ ], [[...]

Basic menu Submenu Function Proje c to r Na m e Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanum eric characters . PJLink Password Set a password to use when you access the proje ctor using compatible PJLink softw are. You can enter up to 32 single-byte[...]

Wireless LAN menu Submenu Function Wireless LAN Pow er Turn On when connecting the projector to the computer over wireless LAN. If you do not want to connect via wireless LAN, turn it Off to prevent unauthorized access by others. This is set to On by default. Co nnec tion Mod e Set the connection mode when using EasyMP Network Projection to connect[...]

Security menu Only available when the supplied or optional Wireless LAN uni t is installed. Submenu Function Sec urity Select the security type from the items that are displayed. When setting up Security, follow the instructions from the administrator of the network system you are about to access. WEP Enc r yption You can set the encryption for WEP[...]

• WPA This is an encryption standard that improves security which is a weak point of WEP. Although there are multiple kinds of WPA encryption methods, this projector uses TKIP and AES. WPA also includes user authentica tion functions. WPA authentication provides two methods: using an authentication server, or authenticating between a computer and[...]

Mail menu When this is set, you receive an email notification if a problem or warning occurs in the projector. s "Using the Mail Notification Function to Report Problems" p.113 Submenu Function Mail Notifi c ation Set to On to send an email to the preset addresses when a problem or warning occurs with a projector. SMTP S erver You ca n in[...]

Submenu Function Tr a p IP Addr es s 1/ T rap IP Ad‐ dres s 2 You can register up to two IP addresses for the SNMP trap notification destination. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) AM X De[...]

Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the source currently being projected. Dependin g on the model used, some input sources are not supported. s "Automatically Detect Input Signal s and Change the Projected Image (S[...]

Submenu Function Res e t All You can reset all items in the Configuration menu to their default settings. The following items are not reset to their defaults: Input Signal , User's Logo , a l l i t e m s f o r Network menus * , Lamp Hours , Language , Password , User Bu tton , a n d Multi- screen . Res e t Lamp Hours Clears the cumulative lamp[...]

Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.[...]

If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a Press the [Help] button. The Help screen is displayed. Us in g th e re m o te c on tro l Us in g th e c on tro l pan e l b Select a menu item. Us in g th e re m o te c on tro l Us in g [...]

If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" be low. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.91 Reading the Indicators The projecto r is provided with th e foll[...]

Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cable is conne cted correctly and that the power is being supplied normally. Sometimes, when the power cable is unplugged, the t indicator remains lit for a short period, but this is not a fault[...]

Sta tus Caus e R emedy or St atus If it is not cracked : Reinstall the lamp and turn on the power. If the error continues : Replace the lamp with a new one and then turn on the power. If the error con tinues : Stop using the projector, remove the power plug from th e el ectrical outlet, and contact your local dealer or the nearest address provided [...]

When the Indicators Provide No Help If any of the following problems occur and the indicators do no t offer a solution, refer to the pages given for each problem. Problems Relating to Images • No images appear Projection doe s not start, the projection area is completely black, or the projection area is completely blue. s p.92 • Moving images a[...]

Problems Relating to Images No images appear Che ck Re m ed y Did you press the [ t ] button? Press the [ t ] button to turn the power on. Are the indicators switched off? The power cable is no t connected correctly or power is not being supplied. Connect the projector's power cable correctly. s "From Installation to Projection" p. 2[...]

Moving images are not displayed (only t h e m o v i n g i m a g e p o r t i o n t u r n s b l a c k ) Che ck Re m ed y Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Change the image signal from the computer to external outp u[...]

Che ck Re m ed y Are the image signals being output to the projector? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) If the image signals are only being output to the computer 's LCD monitor or to the accessory monitor, you ne ed to change the output to an external destination as well as th e comp[...]

Interference or distortion appear in images Che ck Re m ed y Is the image signal format setting correct? (Only when projecting images from a video source) Change the setting according to the signal for the connected equipment. s Signal - Video Sign al p.71 Are the cables connected correctly? Check that all the ca bles required for projection are se[...]

Che ck Re m ed y Is the computer set for dual display? (Only when projecting computer images) If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting. s Computer[...]

Images appear dark Che ck Re m ed y Is the image brightness set correctly? Adjust the Brightness and Power Consumption settings from the Configuration menu. s Image - Brightness p.70 s Settings - Power Consumption p.73 Is the contrast g adjusted correctly? Adjust the Contrast setting from the Configuration menu. s Image - Contr ast p.70 Is it time [...]

Other Problems No sound can be heard or the sound is faint Che ck Re m ed y Check that the audio/video cable is securely attached to both the projector and audio source. Disconnect the cable from the Audio port, and then reconnect the cable. Is the volume adjusted to the minimum setting? A djust the volume so that sound can be heard. s Settings - V[...]

Che ck Re m ed y Are the batteries dead or have the batteries been inserted corr ectly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. s "Replacing the remote control batteries" p.17 Are the remote control ID and the projector ID matched? Make sure the ID for the projec tor you want to [...]

Maintenance This chapter provides information on maintenance procedures to ensure th e best level of perfor mance from the projector for a lo ng time to come.[...]

You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Attention Turn off the projector's power before cleaning. Cleaning the Projector's Surface Clean the projector's surface by wipi ng it gently with a soft cloth. If the projector is particularly dirty, moisten the cloth with[...]

a • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it w ith a new air filter. s " R e p l a c i n g t h e A i r F i l t e r " p.106 • It is recommended that you clean these parts at least once every three months. Clean them more often than this if using the projector in a parti[...]

This section explains how to replace the lamp and the air filter. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The mess age "Replace the lamp." is displaye d at the lower left of the projection screen when you start projecting. The message is displayed for 30 seconds. • The lamp indicator flashes o[...]

How to replace the lamp The lamp can be replaced even when the projector is suspended from a ceiling. Warning • When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assum e that the lamp is cr[...]

d Raise the handle and take out the old lamp. If the lamp is cracked, con tact your loca l dealer or the nea rest address provided in the Epson Projector Contact List . s Epson Projector Contact List e Install the new lamp. Insert the new lamp along the guide rails in the correct direction so t h a t i t f i t s , a n d p u s h i t f i r m l y i n [...]

g R e p l a c e t h e l a m p c o v e r . Insert the hook as shown in the illustration below, and attach the cover. Tighten the lamp cover fixing screw. ② ① Attention • Make sure you instal l the lamp securely. If the lamp cover is removed, the power turns off automatically as a safety precaution. If the lamp or the lamp c o v e r i s n o t i[...]

c Install the new air filter. Push in the air filter until it clicks into place. a Dispose of used air filters proper ly in accordance with your local regulations. Material of the frame part: Polyph enylene ether and polystyrene resin Material of the filter part: Polyurethane foam Replacing Consumables 107[...]

Appendix[...]

EasyMP Network Projection (EB-1775W/EB-1770W/EB-1760W only) By using the supplied EasyMP Networ k Projection, you can project your computer screen from the projector via a network. Sharing the projector over the network allows you to project data from different computers w i t h o u t c h a n g i n g t h e s i g n a l c a b l e . E v e n i f t h e [...]

The followi ng optional accessories an d consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: August 2010. Details of accessories are subject to change wi thout notice and availability may vary depending on the country of purchase. Optional Accesso[...]

Changing Settings Using a Web Browser (Web Control) By using the Web browser of a computer connected to the projector on a network, you can make settings and control the projecto r. This functi on allows you to perform setu p and contro l operations remotely. In addition, s i n c e y o u c a n u s e t h e c o m p u t e r ' s k e y b o a rd, en[...]

b Click Web Remote . c The Web R emote screen is displayed. Name Func tion A [ t ] button Turns the projector power on or off. s "From Installation to Projection" p.26 B [Computer ] but ton Changes to images from the Compute r port. C [V ideo] button Each time you press the button, the input source changes between images from the Video po[...]

Using the Mail Notification Function to Report Problems When you set Mail Notification, notifi cation messages are sent to the preset email addresses when a problem or warning occurs with a projector. This will enable the operator to be notified of problems with projectors even at locations away from the projectors. s Network - Mail - Mail Notifica[...]

ESC/VP21 Comman ds You can monitor and control the pr ojector from a computer via USB. Connect the device and the projector with a USB cable, and then enter the communication commands (ESC/VP21 commands). Before starting To control and monitor the projec tor using ESC/VP21 commands, the following prepar ations must be carri ed out. a Install the US[...]

• Stop-bit: 1 bit • Flow control: None Monitoring and Controlling (EB-1775W/EB-1770W/EB-1760W Only) 115[...]

Check the numbers and then apply the follow ing countermeasures. If you cannot resolve the problem, contact your network adminis trator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Ev ent I D Cause R emedy 0432 0435 Failed to startup EasyMP Network Projection. Rest[...]

PJLink Class1 was established by th e JBMI A (Japan Busine ss Machine and Information System Indust ries Associ ation) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA. It com[...]

Projection Distance (For EB-1775W/EB-1770W/ EB-1760W) A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a ceiling) C Center of lens Unit: cm 4:3 Scree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 28" 57x43 71 - 85 -4 30" 61x46 76 - 91 -4 4:3 Sc reen[...]

Unit: cm 16:10 Sc ree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 30" 64x40 67 - 80 -4 40" 86x54 89 - 108 -5 50" 110x67 112 - 135 -6 60" 130x81 135 - 162 -7 80" 170x110 181 - 217 -10 100" 220x130 226 - 271 -12 150" 320x200 340 - 408 -18 200" 430x270 454 - 545 -24 250" 540x340 567 - 681 -31 300&quo[...]

4:3 Scree n Size A B Mi nimu m (Wi de) to Ma x imu m (T ele) 60" 120x91 145 - 174 -10 80" 160x120 194 - 233 -14 100" 200x150 242 - 291 -17 150" 300x230 364 - 438 -26 200" 410x300 486 - 584 -34 250" 510x380 608 - 730 -43 300" 610x460 730 - 877 -51 Unit: cm 16:9 Sc ree n Size A B Mi nimu m (Wi de) to Ma x imu m (T e[...]

Supported Resolutions Computer signals (analog RGB) Signal R efresh R ate (Hz) Resolutio n (dots) VGA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x768 WXGA 60 1280x768 60 1360x768 60/75/85 1280x800 WXGA+ 60/75/85 1440x900 SXGA 70/75/85 1152x864 60/75/85 1280x1024 60/75/85 1280x960 SXGA+ 60/75 1400x1050 WSXGA+ * 1, 2 60 1680x[...]

Si g n al Re fre sh R at e (H z) Res o lu tio n ( d o ts ) UXGA 60 1600x1200 SDTV (480i/480p) 60 720x480 SDTV (576i/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080 Supported Monitor Displays 122[...]

Projector General Specifications Prod uc t nam e EB-1775W EB-1770W EB-1760W EB-1750 Dimens ions 292 (W) x 44 (H) x 210 (D) mm (n ot including raised section) LCD panel size 0.59" Wide 0.55" Dis pla y method Polysilicon TFT active matrix Re so lu tio n 1,024,000 pixels WXGA (1280 (W)x 800 (H) dots)x 3 786,43 2 pix els XGA (1024 (W) x 768 ([...]

Mass Approx. 1.7 kg Prod uc t nam e EB-1775W EB-1770W EB-1760W EB-1750 Con ‐ nec ‐ tors Compu ter por t 1 Mini D-Sub15- pin (female) Vi d e o p o r t 1 RCA pin jack Aud io port 1 Stereo mini jack HDMI port 1 H D M I ( A u d i o i s o n l y s u p p o r t e d b y P C M ) - USB (TypeA) Por t * 1 USB connector (Type A) USB (TypeB) Port * 1 USB conn[...]

This product is also designed for IT power dist ribution system with phase-to-phase voltage 230V. Angle of tilt 30 ° 30 ° If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident. Specifications 125[...]

DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Tel: 562-290-5254 Declare under sole responsibility that the product identified he[...]

292 107.5 28.6 3 50.4 A Center of lens B Distance from center of lens to suspension bracket fixing point 210 148 38 42 52.5 100 222 Units: mm Appearance 127[...]

This sec tion briefl y explain s the difficult terms that are not expl aine d in the text of this guide. For details, refer to other commercially available publications. AMX De vic e Disc overy AMX Device Discovery is a technology develo ped by AMX to facilitate AMX control system s for easy operation of the target equipm ent. Epson have implemente[...]

sRGB An internation al standard for color intervals that was formulated so that colors that are reprod uced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB. SSID SSID is identification data for conne[...]

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, wit hout the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information conta[...]

GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Versio n 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the s ource code [...]

GNU GENE R AL P UB LI C LICENSE TE RM S A ND CONDITI ONS FOR COPY ING , DIST RI B UT ION AND MODIFICAT ION 0. This License applies to any program or other work which contains a notice pla ced by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such progra[...]

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the progr am in obje ct code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means th e preferred f[...]

Each version is given a distinguishing ve rsion number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and condit ions either of that version or of any later version published by the Free Softw are Foundation. If the Program does not specify[...]

<signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a su broutine library, you may consi der it more useful to permit linking proprietary applications with th e library. If this is what you want to do, use the GNU L[...]

Finally, software patents pose a constant th reat to the existence of any free program. We wish to make sure that a company cannot effe ctively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of th e library must be consistent with the [...]

a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refe[...]

If such an object file uses only nu meri cal parameters, data structure layouts and accessors, and small macros and smal l inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will [...]

9. You are not required to accept this Lice nse, since you have not signed it. However, nothing else grants you permission to m odify or distribute the Library or its derivative works. These actions are prohi bited by law if you do not accept this License. Therefore, by modifying or dis tributing the Library (or any work based on the Library), you [...]

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGH T HOLDER, OR ANY OTHE R PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRA RY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR IN ABILITY TO USE THE LIBRARY (INCL[...]

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, I NCLUDING, BUT NOT LIMITED TO, THE I MPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOS E ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDE NTAL, SPECIAL, EX[...]

The Unix configuration script "configu re" was produced with GNU Autoconf. It is copyright by the Free Software Foundation bu t is freely distributable. Th e same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable. It[...]

libpng versions 0.5, May 1995, through 0. 88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and licens e, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Librar[...]

If you redistribute modified sources, we wo uld appreciate that you include in the fi le ChangeLog history information documenting y our changes. libmd5- r fc This projector product includes the open so urce software program "libmd5-rfc" which applies the terms and conditions provided by owner of the copyright to the "lib md5- rfc&qu[...]

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred fo rm for making modifications, including but not limited to software source code , documentation source, and configuration files. "Object" form shall mean any form[...]

You may add Your own copyright statem ent to Your modifications and may provide additional or different license te rms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Work s as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated [...]

A A/V Mute ...................... ................................ 51 Abs. Color Temp. .......... .................... .......... 70 Air exhaust vent ........... ...................... .......... 10 Air filter replacement pe ri od ......... .......... 1 06 Aspect .............. ..................... ................... 40, 72 Auto H/V-Keystone .. .[...]

Mouse pointer ....... .................... ................... 54 Multi-screen .................... ..................... .. 58, 75 N Network Configura tio n .............................. 76 Network information .... ............... ............... 76 Network menu ..... ................................ ........ 76 Noise Reduction ............. ....[...]

User's Logo ......... ................. ............... .......... 60 User's Logo Protect ..... ...................... ........... 62 V Video port ............. .......................... .............. 11 Video Signal ................... ................. ....... 71, 84 Volume ............ .............................................. 7[...]